CK-7W not switching off on bluetooth connection

Hi,
Complete noob so please bear with me - trying to upgrade my carkit on the cheap.
Have just upgraded from a CARK-91 to a CK-7W by just swapping the HF unit, removing the cradle and installing a CU-7 button in the car. No cradle any more - just BT.
With regards the power I just used a molex converter which converted the 6pin connector to a 4pin. It seems to work fine but the kit does not seem to switch off. I understand that if the IGN sens is not wired the unit will stay on even after the ignition is switched off. But according to the manual it should switch after two minutes if the phone is disconnected.
When I walk away from the car my phone disconnects. If after 10-15 mins I go bit closer to the car, I can see the CU-7 blue light is on and if I do a search on my phone for audio enhancements it finds the CK-7W.
When I get in the car my phone does not auto connect again regardless of the ignition until I press the CU-7 button once. The phone then pairs and the car kit beeps.
So, I dont understand why the blue led on the CU-7 stays on. This suggests the kit is still powered on - but then why does it not auto-pair with the phone until I press the CU-7 button once?
Any ideas please?

It sounds like your ck-7w has had a software freeze, try disconnecting the unit for a couple of minutes, then plug back in. Also using a test lamp chack the blue wire to see if there is power there and if it switches off with the key, it may be wired constant live.
Danny b
Nokia Accredited Installer
If my answers help you, give me a Kudos. Its like a pat on the back.

Similar Messages

My IPhone 4S is hanged during updating IOS 6 to IOS 8, PHONE was connected WIFI and under charging with computor. Kindly help, it is not switching off, not restarting

My IPhone 4S is hanged during updating IOS 6 to IOS 8, PHONE was connected WIFI and under charging with computor. Kindly help, it is not switching off, not restarting

Hi HARISH INDIA,
That is not good but lets see if we can get it back to life. If you can, see if you can put your iPhone into recovery mode and then use iTunes to restore it. If you can get it to restore, it will erase everything off your iPhone. If you have a back up in iTunes or iCloud then you can put that on after the restore is complete. Take a look at the article below for more information.
If you can't update or restore your iPhone, iPad, or iPod touch
http://support.apple.com/en-us/HT201263
Take it easy,
-Norm G.

When you set airdrop to ÓFF', blutooth is not switched off?. Can anyone help me.Am I missing something in the setup?

when you set airdrop to ÓFF', blutooth is not switched off?. Can anyone help me.Am I missing something in the setup?

What exactly are you trying to do?
Turn off Bluetooth?
Swipe up from the bottom of your screen and tap the bluetooth icon (White is on, Back is off)
or
Settings > Bluetooth > Bluetooth - Off

My apple iphone doesnot open whenever i enter the paascode nothing eill happen only screen shows enterpasscode also the digit when i enter it remain blankeven it not switch off what will i dol

my apple iphone doesnot open whenever i enter the paascode nothing will happen even the digit locks remain blank n it also not switch off whenever i try to switch off or try to open after enter passcode

1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766

3gs freezes, loses signal, switches off then says connect to itunes

3gs freezes, loses signal, switches off then says connect to itunes, it has done this several times over the last week. Started whilst sending an email and now happens at least once a day. Help! please if anybody has had the same issues.
Thanks

Your post is not clear. If you have no plan, were you using it as an iPod Touch? Did you try to restore and activate it again?

How to switch off the internet connection via GPRS by iphone 3G

how to switch off the internet connection via GPRS by iphone 3G?
need help.
thanks

Your router may not have given your iPod a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address shown starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPod (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router make/model, the wifi security being used (WEP, WPA, WPA2), etc.

My Mac Pro does not switch off.

It worked before Lion. Installed 10.7 and also upgraded to 10.7.1 but, on both cases, it does not switch-off. To be precise it "sometimes" switch-off but many times it does not. Let's say once on 15 times... With Leopard I nevere had this problem. (it persists also after a PRAM reset). I also run a second problem but only once and only upgrading to 10.7.1 (not to 10.7). It says that my RAM was on wrong position.. I had to remove and install the RAM again and it worked.
Any other case like this? (This append only on my MacPro - early 2009. On my MacBook and my MacBook Pro OSX Lion works fine).

Is there a pattern to the chimes, or are they simply random, as if the Mac is repeatedly rebooting on its own?
Have you tried a "Safe Boot"? Press and hold a Shift key as you power up the Mac. Does it start then?
If it starts at all "Safe Boot" will take much longer than usual, that's normal. Shutting down will take longer also. Try it.

ORA-12518 TNSlistener could not hand off the client connection

I am using oracle 11g on windows sever 2008. when i am trying to connect application to database it gives the error ORA-12518 TNSlistener could not hand off the client connection. and everytime when i connect it gives the error.there is a need of either restart the database or increase the number of processes. many times i increased the number of processes. now the no. of processes is 500 and maximum utilization is 437 and current utilization is 435. how can i resolve the problem permanently.
thanks in advance....
Edited by: k.bhanja on Mar 21, 2012 10:53 PM

thanks kuljit,
In sqlnet.ora i am getting the following error..
Fatal NI connect error 12518, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=WIN-2CS4P4UZMJL)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=orcl)(SERVER=DEDICATED)(CID=(PROGRAM=C:\app\Administrator\product\11.1.0\db_1\jdk\jre\bin\java.exe)(HOST=WIN-2CS4P4UZMJL)(USER=Administrator))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 11.1.0.6.0 - Production
Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 11.1.0.6.0 - Production
Time: 16-MAR-2012 16:08:45
Tracing not turned on.
Tns error struct:
ns main err code: 12564
TNS-12564: TNS:connection refused
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
and in listener log file....
21-MAR-2012 00:00:05 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=__jdbc__)(USER=))(SERVICE_NAME=orcl)) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.15.1.26)(PORT=39001)) * establish * orcl * 12518
TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
32-bit Windows Error: 233: Unknown error
but if i increase the number of processes or restart the database, the problem does not occur.

HT1296 my i phone 4s will not switch off and i,ve got apple sign and a bar underneath on screen and it seems to be frozen ,,any body no how to sort it out please

my i phone 4s will not switch off and ive got a apple sign and a bar empty underneath ,,how do i turn it off and get it working again please , ps i have held down button on top but it will not turn off >??????????

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Car ck 7w not switch off

Hi all, I have a problem with HF ck-7w. This hf is not switch off. According to manual it must do after 2 minutes. I try to find active BT devices after 2 hours and I find the HF (the blue led is still light! Any idea? Thank for your help. Jan

Check the blue wire, it may be wired constant live and should be wired to ignition live. Also try and disconnect the main box, it may have had a software problem and needs resetting.
Danny B
Nokia Accredited Installer
If my answers help you, give me a Kudos. Its like a pat on the back.

ThinkCentre Edge 71, Power LED does not switch off

Since I have installed win7 64bit, the pc does not switch off after Power down command. For switch off i must hold the power button >10sec.
Thanks for Help.

Hello Walter,
Please update the BIOS which will resolve the issue.
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkcentre_bios/9qjy36usa.exe
You may also try the Windows registry setting. Kindly be careful while editing windows registry.
Have a look at the following registry location (note that you need to invoke regedit.exe with administrative privileges in order to make any changes in this location) and ensure that the value ClearPageFileAtShutdown is set to 0 (if it is set to 1, change the value to 0).
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management
Best Regards,
Tanuj
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

IMac fan not switching off

We have a 2007 Intel iMac and the internal fan is not switching off. Would be grateful for some assistance or advice?

I took my 2010 27" iMac in for the same reason. They said my hard drive is over heating and needs replacing. My monitor is also dying. Less than 2 years old. The mother board was replaced this time last year.

HT1369 my 5th generation nano appears to have frozen with the apple logo appearing continually. It will not switch off and is not recognised any more on my computer.

My 5th generation nano appears to have frozen. It only shows the apple logo and will not switch off. It is also now not recognised by my computer. I have downloaded the latest itunes but that has made no difference.
Any suggestions?

Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
Fixing an iPad Home Button
http://tinyurl.com/om6rd6u
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

My Iphone 4 will not switch off silent .... Please help.

I Updated My IPhone 4 on the 2nd of Jan 2013 and since then it will not switch off silent mode with the switch on the side of the phone , does any one know what i can do or if there is any other way to switch it off silent ?

First, try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose data by resetting, but it can clear some glitches.
If this does not help, set it up as new device, shown here:
How to back up your data and set up as a new device
If still not luck, you'll have to get it looked at by visiting an Apple Store or contact Apple to get it serviced:
Apple - Support - Service Answer Center

WiFi issue: Is it possible to change WiFi settings in a way that it does not switch off in the screen-lock mode?

I have iPhone 4 and 4s. WiFi is automatically switching off on both phones when they are inactive (screens are locked). It is connecting back after some seconds I unlocke the phone. But because I have no subscribtion for the Cellular data usage, I am being cuted from Internet all screen-locked period. All that time people are not able to reach me by email, skype, or other programs using Internet. It is quite uncomfortable, especially when waiting for something important! Is there a way to change this setting?

The iPhone does not shut down WiFi completely when asleep. It does use a power conservation mode. You should still receive notifications. There is no setting for this. It should work for you as it does for me if you don't have a network problem.
There are lots of problems reported with D-Link routers and they don't have a great reputation. If there is no help available from D-Link you may want to consider installing the DD-WRT firmware. It's available for the D-Link 615. See here for information: http://www.dd-wrt.com/site/index
By the way, you do have Notifications enabled for the Apps you are talking about right? See Settings -> Notifications and Mail, etc.

CK-7W not switching off on bluetooth connection

Similar Messages

Maybe you are looking for