CK 7W with N73 & Remote Button voice dialling

Hi wonder if any one can help me ,I have the ck 7w car kit and a n73 when I connect the phone to the ck 7w via blue tooth I can use the remote button to activate voice dialling and every think works as it should do. BUT if I connect it using the supplied cable to the pop port when I press the remote button it doesn’t activate the voice dialling just gives out a bump sound in the speaker .The phone works in every other aspect with the kit attached via the pop port .I bought the ck 7w to use the cable and a holder as I was fed up with my ear type blue tooth dropping out with the phone and while I know the phone works correctly with the ck 7w via blue tooth I didn’t want to use this option and stay within the law as best as possible by not touching the phone while driving. Hope its something simple and not that the kit doesn’t work with the cable would be so disappointed as it’s a nokia product.
Thanks in advance
Regards Malcolm

Sorry perhaps my post was unclear.
The problem was fixed - by changing the phone.
The car kit was fine and not touched, the phone was changed for a different phone and it works well.
Shunts...
I will mostly be communicating with a Nokia E72 Zodium Black
Nokia E72-1 with Vr 051.018.207.04 Software
If this post helped... Add some kudos!!

Similar Messages

Beats by dre urbeats remote buttons don't work

I have the Beats by Dre Urbeats headphones. Last time i used them, i was able to control my music with the remote buttons. Now the remote buttons don't work anymore. When i try it with my apple earpods, there is no problem. The earpods work just fine. Does somebody knows how it's possible that my beats headphones don't work anymore?

The remote app requires home sharing to be enabled on ATV and both to be on the same network. The OP is currently trying to configure the network, a physical remote will be needed for this.

My new updated N73(ME)has problem with Voice Diall...

Hellow to every one,
I ve just take my N73 from NOKIA service center, after 2 months im waiting for. The 1st problem was that after the latest firmware update my phone doesnt start at all. The 2nd problem was and still is that the voice dialling never works. My contacts have a nick each and are stored at phones memory. At service center says that every problem was fixed and for that they send my phone from Greece (where i live) to Sweeden (i think). What else can i do to make works voice dialling? Is that a bug of my phone so i must live with it?
PLEASE HELP!!!!
Regards
V 3.0705.1.0.31
26-01-2007
RM-133
Nokia N73 (07)

There is no volume adjustment that can be made.
Do you have a cover on you iPad that may be covering the mic hole?
If you frequently use FaceBook, you might consider getting an external microphone that plugs into the headphone connector.
 Cheers, Tom

Menu button highlight order with dvd remote

Hi I am using DVD studio pro 4 on a mac book pro.
When I simulate my project and use the dvd remote to naviagate from menu to menu I have noticed that some menus start with the first button highlighted and some with different buttons highlighted.
I have used target menu to link them together rather than link the menu to the exact menu/button1. Ideally I want each menu to start with the first button highlighted and ready to go, but I don't know how dvd sp sets the order and how I can fix this without relinking.
Many thanks for your help

Hi
Check in Inspector Menu Properties the Default Button setting. That must be the button highlighted by default when you open a menu. Try simulating just the menu and check what button you get highlighted by default.
Be aware that when creating connections you can jump to a apecific menu button. You could by mistake be connecting that way.
Hope that helps !
Alberto

Not possible to select the button i want with the remote on my menu..please help

Am I missing somthing? I have my menu all set up in DVD Studio Pro. Everything works fine on the simulator. After burning the DVD and playing it on a computer where i can use my cursor to pick the button, everything works fine. However, when i put it on a DVD player, the buttons are never highlighted..i can't pick and choose a button with my remote. Is there something else i need to do for this to work? Please help.
Greg

Nevermind.... i figured it out myself.

Is Z3 compatible with any 3 button in-line remote?

Hi, I have a Z3 and am looking for some decent (£60-£110) earphones with a 3 button in-line remote control.
I was looking at the Nocs NS500 but it says on their webpage that the Z3 doesn't support 3 button remote controls with 4 poles...
am I stuck with single button in-line remote controls?
Thanks

I'd like to find headphones with volume control and answer/end button as well. I would really like to get the MDR-NC31E noise cancelling ones, but if I have understood correctly, they don't even have answer button. I don't really undertand, what is the point of handsfree set which you can't use to answer calls.
So yeah, I could even live without volume, but if you have ever tried to keep your phone in the inside pocket of your winter coat in Finland in February, you start to understand why it is nice to be able to control the volume and answer calls without removing half of your clothing.
Should I just stick to my crappy Lumia headphones? (Not that crappy, really, the call button just doesn't work with my Sony phone.)

E-51 Voice Dialling with CK-7W

I have an E-51 phone coupled with a CK-7W car kit. I find that the voice recognition submits voice dialling and then cuts out before it actually dials. The dialling does work, though, when I turn the motor off but still use the hands free. Any suggestions?

Sorry perhaps my post was unclear.
The problem was fixed - by changing the phone.
The car kit was fine and not touched, the phone was changed for a different phone and it works well.
Shunts...
I will mostly be communicating with a Nokia E72 Zodium Black
Nokia E72-1 with Vr 051.018.207.04 Software
If this post helped... Add some kudos!!

How do I match encore buttons with my remote control

So, I've made a menu in Encore and when I build the DVD and put it in my DVD player, the buttons don't work how I want them to with my remote control. For example, on the main menu (which I created in After Effects) I have two buttons (one above the other) - "Play" and "Chapters." To go from Play to Chapters on the main menu, I have to push the right arrow button on the remote instead of the down button.
Another example is my chapters menu (created with an Encore menu). I have 6 chapters buttons, plus a "next" and "main menu" button. The logical thing to do with the remote is press the down button when you want the one below, right when you want the button on the right etc. etc. but instead it's all mixed up.
Hopefully that makes sense . . . so how to I tell encore which button on the remote I want to be pressed to go to the desired button on the menu?

It is called "button routing." When the buttons are nicely lined up, "automatic" (the default) usually works well. But sometimes not. Also, if you move buttons around, you can change the numbering.
In the menu viewer, click on the icon for "routing." This will show you what "number" each button is, and what number button each remote arrow click will go to.
You can turn automatic routing off, and drag these numbers to set the remote as you wish.
http://help.adobe.com/en_US/encore/cs/using/WS74BC1059-66C3-46c5-9FA6-78DF10B38353.html

How do You create menu buttons that move up and down with a remote?

I have six menu items that are linked to their proper locations. When I simulated it a Hand moves over the proper choice then when I click there we go.
But on the DVD simulator you can't navigate. I thought maybe I would bring in one of the templates to use their buttons I can't get my images to replace theirs. Any help appreciated.
Jerome

Take a look here to make sure buttons are being set properly
http://dvdstepbystep.com/buttons07m.php
And download the movie if you like
I create a button, then set the text and include highlights
I then create another button, then set the text and the include highlights
I then click on the menu and go to the inspector to see colors
RED Normal
BLUE Selected
YELLOW Activated
In simulater I then use the remote control and CANNOT navigate through the buttons
I stop Simulator and then use Auto Assign Buttons Now Command, then relaunch Simulator and get the remote control to work
Make sure to link the button to the track you want to go to.
I thought the issue is that you cannot navigate the buttons with the remote control? If you only have one button on the screen, it will always be selected (Yellow in your project as described)
If it is flashing Megenta and nothing happens, it means a target has not been set (or somehow you are targeting the menu again)
So the only two condiitions you will see is yellow or magenta.

Nokia - Voice Dialling

Has anyone had complete (100%) success with the voice dialling (recognition) feature on the new Nokia phones. I have used voice dialling for many years now in my car with a Nokia Bluetooth Car Kit but with the system in the older Nokia phones where you (pre) recorded the persons name you wanted to dial. I am very disappointed with the system now employed by Nokia where the 'system' recognises, or doesn't, as is more the case. My N82 with its synthesised system just seems to dial random numbers, whereas before (using my last phone which was a Nokia 6230i) I achieved complete success.
I would welcome a response from Nokia, as to why they have changed what was a very very good system.
Message Edited by tangerine on 26-Jun-2008 05:00 PM
History: Always Nokia since 1994 including Nokia 2140, 7110e, 6150, 6210, 6310i, 6230i, N82
Current: Nokia N8 (Anna - I have no intention of going to Belle) - and delighted with it!

I use the "new" voice dialing regularly and I´m very satisfied with it. Even though when the names are too short or similar it might not recognize it or call someone else...
Since I have names stored in different languages and my base language is german, forces me to pronounce names in a very funny way for it to to work. For instance "James" has to be pronounced "Iamess" to work...
By clicking the "Kudos!" or the "Solution?" button on the right you can say "Thank You" and you´ll show the author and others that the post is useful.
The day we stop improving is the day we stop being good.

Using Voice Dialling while in Cradle

I am using my E70 with an MBC-13 cradle, and CK-7W car kit.
Unfortunately due to the location of the voice dialling button, you can't use it when the phone is in the cradle. Is there any other button that you can use? I know on my old 6680, you could hold down the names button or something?
Thanks!
6300 - E65 - CK-7W - CK-15W - LD-3W - BH-200 - TT6

Create a monitor mix with an Aux Send from your Mackie, and put that in his headphones. Add his voice, nat sound, and the macarena if he wants it. Just don't bring up the faders on those tracks. Only actually send the mic back into the Mac.
edit: I guess I should have asked, how is the mic getting into the VO tool?
Message was edited by: thrillcat editorial

Voice dialling/soft key?

hi, I just can't figure out how to activate voice dialling on my N73. I have read posts on here people say to hold the left soft key but I don't know what key that is. Also, on my handset in the help files it says 'press and hold the right selection key. After you hear a tone and speak now is displayed, say the voice cammand' but I don't know what the right key selection is.
Can anyone help me?

I DID IT! After hours of trying I figured it out! I needed to assign 'CONTACTS' to the right hand button in the 'Settings/Phone/Standby' areas. happy happy happy

N95 - Original Wired Headset & Voice Dialling

Hi All,
I use my N95 with a Bluetooth headset when I'm out and about, and also with the original wired headset (while at work, in my holster, hidden away under my jacket)...
Obviously voice dialling is a huge advantage for a hands-free solution, and it works perfectly with my Bluetooth Headset, but refuses to work at all with the wired headset... Once I press the button, it just bleeps at me and goes back to standby...
Has anyone else experienced this or discovered a solution? If not, I'll submit it to Nokia and hopefully they can do something about it.
Nokia History: 3110, 5110, 7110, 7110, 3510i, 6210, 6310i, 5210, 6100, 6610, 7250, 7250i, 6650, 6230, 6230i, 6260, N70, N70, 5300, N95, N95, E71, E72
Android History: HTC Desire, SE Xperia Arc, HTC Sensation, Sensation XE, One X+, Google Nexus 5

Looks like I might have this sorted. Got a response from Nokia to my 2nd email (replied within a couple of hours - much more impressed) and it appears my headset might be faulty as it should initiate the voice dial function.

When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?

When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?

Hi Brian,
Thanks restoring and restarting didn't fix my problem - i have started it fresh and still it doesn't work. Basically I press ONCE on the remote, after the machine has not had any commands for 10 minutes, and the cursor skips from one end of the menu to the other - so I can't choose network or update software etc - I sometimes manage to stop it randomly in the middle of the menu if I press on a command in the middle of the cursor skipping all the menu steps...not sure what the problem is but I have basically not used my brand new apple tv since I bought it for that reason! I should call Apple support I suppose! grrrr hate wasting time with stuff like this!
Thanks for your help though!
Pernille

Can you manually advance a Captivate slide presentation with a remote control and a projector.

I have published a large volument of PowerPoint presentations with Captivate 5.0 and intend to distribute the presentations to live instructors as a means to control content delivered live by instructors to the students. The files are aggregrated into groups of lessons and published to PDF with a Table of Contents.
We need to avoid manually advancing the show from the laptop.
Having difficulty determining how to use remote control via laptop and projector to advance the next slide or presentation. Can't get it to work. Was able to do so previously with PowerPoint slides converted to PDF shows. Remotes/Laser pointers worked fine. But now that I have processed the shows through Captivate 5.0 can seem to find a remote that will work with the new PDF or SWF with our systems.
We use a laptop and projection system, so need to be able to advance the show to the next "slide" manually and are trying to figure out how to do it with a remote control.
Has anyone else experienced this challenge and did you find a solution?.

Hi Carey,
if you can apply the letter "A" for "next" to your remote control?
Then you could add a shortcut to your buttons in the captivate file.
In deapth:
Go to a PPT importet slide (using the "click mouse" option to continue".
Click somewhere in the screen (clickbox_xx will be selected).
Properties - Action - Shortcut. Click it and press "A".
Click somewhere on the stage.
Now when you press your next button on the remote, Captivate will receive an "A" and continue to the next slide.
Hope this helps
Best
TD

CK 7W with N73 & Remote Button voice dialling

Similar Messages

Maybe you are looking for