CK11n Costing Run does not pull purchasing price from info record.

Hi,
I have material which is a semi finished product (Material type: SEMI) and is purchased from a fixed vendor (specified in the source list).
The costing run does not pick up the purchasing price from the purchasing info record but
instead incorrectly picks up the standard price from the material master (Costing 2 view).
Can you please help me solve this issue?
Thanks,
Ketan

Execute OPL1
or
SPRo>>IMG>>Controlling>>Product Cost Controlling>>Cost Object Controlling>>Product Cost by Order>>manufacturing Order>>Check Costing Variants for Manufacturing Orders (PP)
Select the costing variant in the table from "Change Costing Variant: Overview" Overview Screen
Click Detail Button
Click Valuation Variant Button in the Control Tab
Change View Valaution Variant Detail Screen Appears
In Material Valuation Tab Set Price from Purchase Inforecord as Priority 1 if you want to use Price from Purchase Inforecord for semi-finished product during CK11N
You can list down Priority 2 to 5 depending on your requirement
This would solve your problem
Edited by: Paul Pandian on Mar 17, 2009 3:01 AM

Similar Messages

PO not picking Purchasing org from info record

Hi All,
While creating PO system is not picking Purchasing org??? Rest capturing everything whatever is maintianed.
Please tell me the solution
Rgrds
SS
Edited by: SunilSisodia on Dec 14, 2011 8:59 PM

Hi,
Info record is combination of plant,material and vendor master record,all data from MMR and Vendor get copied into Info record which flow IN PO while creating PO,
when we enter vendor code and material master in PO then info-records come in PO
check following like also
[Info Record: Plant Vs Purchasing Org Level;
[http://help.sap.com/saphelp_46c/helpdata/en/75/ee102f55c811d189900000e8322d00/content.htm]
Regards
Kailas Ugale

Purchase Order is not Picking Price from Info Record.

Dear All,
User had created a Shopping cart in and an automatic Purchase Order is created which is picking the material price from Purchase Requisition but not from Created Inforecord. As checked in P.R at item level it is found that in VALUATION tab there is a field named as " P.O PRICE " , here defalt t selected as " 1 A Gross Price "., Can u please help that from where this field is automatically selected as Gross Price in Purchase requisition.
Thanx n Rgds,
sap11

This is the config done in the OMET transaction where you will see the Adopt PO price field is checked and now this funcitonal authorization code e.g. 01 assgined to user profile in SU3 transaction agianst the parameter EFB.
if this is active than it will not take price from info record but it will copy from PR.
to avoid this kind of issue -
Remove the EFB value in SU3 for particular user or if user needs to have the EFB profile for some other requirements than go to OMET and remove Adopt po price indicator from that profile which is assigned to user

Mass Update price of Purchase Order from Info Record

Dear guru ,
I have created many purchase orders.
After this creation I change the prices of linked info records.
Does exist a transaction that mass update the price of purchase order from info record ?
Thanks.

Use transaciton MEI2 for price update in Mass.

PO Price from Info Record

Hi Experts,
We want that in one order type of purchase order PO should be made from Info Record Price. Suppose info record price is Rs 5. Nobody should be able to make po in price 4.90 or 5.10.
Please help me to achive the same.
Regards
GR

Hi,
Check the setting :
Spro-MM-Purchasing - Purchase order- DEfine screen layout at document level. Here you select the required field selection like NBF and double click on the items and make price in display mode so that in PO net price can not be changed at item level.
Select the condition type PB00 ( price from info record) and( path :: spro-conditions - price determination process - define condition type ) and go to Changes which can be made tab and select Manual entries and set " D" Not possible to process manually. Here at the condition level, price can not be altered.
Check it out.
REgards
Ram

Deactivate default PO price from Info Record

Dear all,
Would someone enlighten me how to deactivate PO price from Info Record.
PO condition is setup as not control at plant level.
Regards,
Peck Har

Hi
use
MEMASSIN - Mass Maintenance
here u can delete info record also
Vishal...

Price from Info record

Hi
I maintained the vendor/material info record but when I created the PO the material price is not populated from info record? your advice please.

hi,
You can check price for material or condition PB00 in me12/me13
Also to get price from Inforecord you need to do some setting in Condition Type
Goto V/06, select condition type and in Changes can be made area, in manual entries tab select
B Automatic entry has priority
OR
D Not possible to process manually
Regards
Vishal

PR from project Price - from Info Record

Dear All,
When we create a PR from project- against the network, the price needs to pick from info record. But now its picking from the MMR. How can i achieve it ? I did few changes like changing the priority in cost variant. But still its picking the price from the MMR only. Can anybody help me to resolve the issue ?
regds,
CB

Try with user exit EXIT_SAPLMEREQ_005

PO not picking up the Price from Info Record ???

Hi,
Pricing Procedure and the Schema Grp is defined in Schema Determination in SPRO.
Schema Grp has been assigned in the Vendor Master.
Price has been maintained in the PB00 condition type in the Condition Supplements screen, but shows 'Zero' in the 'Purchasing Org. Data 1' screen of Info Record.
However, while creating PO the system does not pick up the Price from the Info Record and both the Condition Types PB00 and PBXX appears and display the Amount as 0.00 ? Also the system does not take the value entered in the 'Net Price' field and the Price can only be entered manually in the Conditon Type in the Conditions Tab ?
Can anyone help in resolving this issue ?
Lucky.

Hi Lucky
1.Routine 6
This is an example of a pricing requirement. This requirement is met if the condition exclusion indicator is not equal to 'X'. <b>This requirement can be assigned to a condition type in the pricing procedure to ensure that it is not accessed when a condition record with exclusion indicator 'X' has already been found</b>. Condition exclusion is a general tool that can be used to exclude conditions from pricing based on previous conditions that have been found in the pricing procedure. This requirement is intended for use in MM pricing versus SD pricing. For SD pricing, a variation of requirement '2' should be used which would also check to see if the item category is relevant for pricing
2. You have define all your supplementory condition in supplementory pricing procedure and you have to assign this supplementory procedure to your Condition type PB00.Then all these conditions will be displayed at item level for selection in drop down.
Since the supplementory conditions are dependent on PB00, you have assign to the PB00.
If you maintain the values for these conditions in info record, these values will be copied from info to PO.
Regards
Ramakrishna

Bring to the PR the price from Info-Record

Hello experts,
If I am working with info-records that are created automatically when doing the PO with the price of last PO, I would like to bring this price to the PR when doing for the same material and vendor. Is it possible? I only get the price from the info-record in the PO but not in the PR.
Thanks in advance,
Best regards,

Hi,
PLease read the SAP note 311174:
Symptom
You create a purchase requisition and go onto the initial screen of
source determination. Although the system determines a source of supply,
no data is copied from the source of supply. In particular the price is
not used from the outline agreement or the info record. For purchase
requisitions with account assignment the account assignment is also not
copied from the outline agreement.
The same applies for Transaction 'Create Purchase order' (ME25) with
unknown vendor.
Cause and prerequisites
The transfer of data from the source of supply is not planned and only
makes sense in some cases. In particular when you change the source of
supply later the copied data must be changed again. However, at this
time it is no longer clear whether the data was copied from the source
of supply or was entered manually.
Solution
Currently and in the near future there will be no solution.
Best Regards,
Arminda Jack

Free goods not reflecting in PO from Info Record

Hi,
My requirement is , when ever i order 100 qty from a vendor 10 qty should be delivered free of cost.
I am trying to maintain Info record for the same..
Now when i created PO for the same...I entered 100 qty..it is not reflecting 10 qty in another line in PO..
Where i am wrong?
Uts

HI,
Have maintained the values in
*Spro-Purchasing-Discount in kind-Define & assign discount in kind schema-Maintain free goods schema*
It will be available in standard SAP if not do the following configuration
Here
Usage -N
Application -M
create procedure NR0001
In control data
step-10
Cond Type-NR00
Then save.
Next
Define free good schema
Here assign ur schema grp of vendor
Then assign the procedure created previously (i-e) NR001 & THEN SAVE.
The above configuration is very important for the free goods scenario to work.
Then go to MM and in purchasing view and give the value 2.
Then in MBN1 create the condition record for the IR -0.
Then create the PO it will work definetly.
9884057038
murugan
Edited by: Murugan mgl on Jun 17, 2009 6:58 AM
Edited by: Murugan mgl on Jun 17, 2009 6:59 AM

PO retrieve old price from info record

Hi Experts,
I have maintain 2 pricing condition in info record with different validity date.
Why PO still retrieve price which is validity date was expire instead of the valid pricing?
Thank you.

Hi,
Yes. Normally the price will be picked from inforecord if it exits with conditions with valid date, otherwise the price will be picked from the Last PO .
regards,
abi

Disable adopting price from Info record

Dear Experts,
While creating the PO i don't want the price to be adopted from the Info record ..
I want to disable this function
Thanks in advanced

Hi
Its very easy dear....just remove the access sequense from the basic price condition u are using in ur schema, Basically what i understand is u might be using the SAP standard basic price condition (PB00 / PBXX) these conditions are by default having access sequence assigned. Either just remove these access seq. or create another condition type a copy of the existing one but just remove access seq. and assign this condition type in ur calculation schema in place of present baseic price condition.
In SAP standard conditions there is already one condition type of Gross price for manual price (means without access seq.) u can use that also.
Hope this solves ur problem
Regards
Vineet Baweja

MD02 RUN DOES NOT GENERATE PURCHASE REQUISTION

Hello SAP Gurus,
I have an issue regarding MRP Run ( MDO2). I have one parrent material (In house production) and maintained a child material (External procurement) through BOM. I am creating Sale order for parent material and excepting automatic Purchase Requestion creation for child material when i run MD02 for parent material. When i am going to MDO4 for child material, No PR created. Its showing "Direct Procurement".
Please help me to find out what settinfs i am missing.....
Thanks in advancs!!
Santy

Hi,
With above answer, I am adding a point..
Check Item category group in material master & also check assignment of Item Category to Sales Order type.
Regards,
Biju K

ProxySelector does not pull proxy settings from configuration file?

Hi everyone,
I try to use class ProxySelector to find proxy settings on Windows XP. When a proxy server URL and port is set explicitly in the "Internet Options" control panel, this proxy setting is detected by class ProxySelector - no problem.
When a proxy configuration file is set in the control panel, class ProxySelector returns no proxy setting (i.e. DIRECT) - PROBLEM
(yes, the configuration file works otherwise, i.e. the proxy is pulled when using Firefox or Internet Explorer
and yes, the proxy works too, i.e. when using the proxy url and port directly, HTTP can be used in Java too).
Does anyone have a hint on how to find out the proxy server url and port to use for HTTP out of Java, when the proxy is set through a configuration file as described above?
Thanks a lot for any help
Ulrich

Hi again,
I found a solution in the mean time: ProxySelector does return the local "browser settings" for a proxy server (i.e. proxy type and address) when an application is started with Java Web Start. When started with Java Web Start, a correct proxy type and address is also returned, when a ".pac" file is set in the browser settings.
So, when an application needs to determine a proxy configuration, although it might be started locally one needs to create a JNLP file and launch respective application (locally) using Java Web Start.
Ulrich

CK11n Costing Run does not pull purchasing price from info record.

Similar Messages

Maybe you are looking for