CK11N, object was not costed

Hi,
I am running CK11N, and have question about why the components of the BOM do not get costed.
I have a BOM structure for material A1SUBASSEM, the components are A1_CD and A2_CD, how come the A1_CD and A2_CD components do not get costed?!

Hi,
pls check whether the Costing relevancy indicator is set for the components in the CS -Component details screen-status tab page.
also check whether the BOM application id is given in the Qty structure of the costing variant or
try CK11N by giving the BOM Usage , id etc...
Also check whether the Accounting And Costing views are maintained with all the necessary fields.

Similar Messages

Error in CK11N ( Object was not costed )

Dear All,
In CK11N run with Costing variant NTAX. Error message CK 060 Object was not costed.
I updated moveing average price in material master - accounting 2 - Tax price 1 field i give the value.
Please help me on this.
Best Regards,
Venkat.
Edited by: venkateswarlu reddy on Sep 18, 2009 6:58 AM
Edited by: venkateswarlu reddy on Sep 18, 2009 7:18 AM

Hi,
there could be variety of issue that would result in a cost object not being costed.
You need to check the error log and find out what exactly the issue and then resolve it.
Best regards
Surya

ADMT 3.2 Group Migration - Include File error: The object was not found in the domain

Hello,
I have been digging for weeks and still no answer. I am trying to migrate Group across two domains and if I select the group, it works just fine. But I want to bulk-migrate groups. So I am going the Include-File route. when ever I load the file I get
the bulk of the groups processed but I get a dialogue box that states:
The following objects are either not found or do not meet selection requirement. No migration will be performed on these objects.
Then I get a list a group and the message states:
The object was not found in the domain "contoso.com"
Does any one know anything about this or how to fix it? I have compared the files with good/bad versions using ADSI edit and from its POV they look the same.

Hi,
Thanks for your post.
There is an attribute named "showInAdvancedViewOnly" which specifies whether the object is to be visible in the "Advanced" mode of user interfaces. This is to say, if the schema attribute "ShowInAdvanceViewOnly" is set to TRUE for any security principal
in AD, we would not be able to find that account or group while trying to migrate it except the simple ADUC search. Just as the issue you encountered.
Therefore, please enable the "Advanced" mode in Active Directory Users and Computers, and then check if the three groups could be migrated or not.
If anything unclear or you have any questions about this case, please feel free to let me know.
Thanks and I look forward to your reply.
Best regards,
Ann Zhu

Error:[The specified object was not found in the store] when trying to read another mail box using Delegate access

Hi all,
I need to create service to access all unread mails of other mailbox's every time in Exchange server 2013, for that i trying to use Delegate access.
but i am not succeed. I am getting Error Every time : [The specified object was not found in the store]
error shows in FolderId in
var folderId = new FolderId(WellKnownFolderName.Inbox, userMailbox);
List<DelegateUser> newDelegates = new List<DelegateUser>();
DelegateUser emailDelegate = new DelegateUser("[email protected]");
emailDelegate.Permissions.InboxFolderPermissionLevel = DelegateFolderPermissionLevel.Editor;
newDelegates.Add(emailDelegate);
Mailbox mailbox = new Mailbox("[email protected]");
Collection<DelegateUserResponse> response = service.AddDelegates(mailbox, MeetingRequestsDeliveryScope.DelegatesAndSendInformationToMe, newDelegates); var userMailbox = new Mailbox(useremail);
var folderId = new FolderId(WellKnownFolderName.Inbox, userMailbox);
var itemView = new ItemView(20);
var userItems = service.FindItems(folderId, itemView);
i changed my code in many ways by adding new Delegate User with different folder permissions.
but i am getting same Error, Please help me.

That error means you don't have rights to the Mailbox your trying to access. In Exchange by default the only user that has access to mailbox is the owner of the Mailbox, Exchange Administration rights does not grant you access to another users mailbox. You
need to either specifically grant rights to each mailbox using Add-MailboxPermissions or use EWS impersonation where you can impersonate the owner of the Mailbox see
http://msdn.microsoft.com/en-us/library/bb204095(EXCHG.140).aspx and
http://msdn.microsoft.com/en-us/library/office/dd633680(v=exchg.80).aspx
Cheers
Glen

"Using" and SPRequest object was not disposed

Just trying to understand what is happening here. I have an event receiver that currently is not working (yet to find the bug).
The code is incredibly simple and uses 2 "using" statements as per best practise in order to ensure the the objects are disposed of.
When I look in the ULS logs and get the error for my event receiver it is immediatly followed by the "SPRequest object was not disposed" messages that I'm sure you have seen.
Given that my code is within a using statement how can this be true?
If there is a problem does "using" not clean up after itself like a try/catch may?
I could change my code to be try/catch and clean up within the finally block but I thought using might clean up.
Is this not the case or am I misunderstanding something?
public override void ItemAdding(SPItemEventProperties properties)
base.ItemAdding(properties);
string theCourseName = properties.ListItem.Title;
using (SPSite site = new SPSite(properties.WebUrl))
using (SPWeb web = site.OpenWeb())
SPListTemplate theTemplate = web.ListTemplates["CourseFeedback"];
web.Lists.Add(theCourseName + ", Feedback", "Feedback from the course you attended", theTemplate);

Hi QPR_JAY,
If full of the error message content is"An SPRequest object was not disposed before the end of this thread",here is an article about it, and gave the reason and solution.
http://littletalk.wordpress.com/2010/07/06/an-sprequest-object-was-not-disposed-before-the-end-of-this-thread/ .
A similar post:http://social.technet.microsoft.com/Forums/sharepoint/en-US/d12df69e-12fb-4fe9-8707-40e34a1faae0/sharepoint-uls-logs-an-sprequest-object-was-not-disposed-before-the-end-of-this-thread
Qiao Wei
TechNet Community Support

FAST Search - The object was not found exception.

Hi all - I am getting "The object was not found exception" error for one of my site collection I checked the permissions they are there. Please let
me know how to find more details about error with Item id specified in crawl log.
Also let me know what could be issue for this error. Only one line of error is not helping me to troubleshoot.

Hi Satish,
Do you have alternate access mappings configured for your web application or an incorrect IIS binding? Have you seen these posts?
http://sharepoint.stackexchange.com/questions/22844/object-not-found-error-in-search-service-crawl-logs
http://serverfault.com/questions/130663/sharepoint-server-search-not-crawling
Please remember to click Mark as Answer on the answer if it helps you

Crawling error: The object was not found SPS 2010 FBA

Hi,
We have a SharePoint 2010 Foundation environment. This environment contains one app two front ends and an SQL backend server. We have a web application on port 80 with hostheader http://subdomain.domain.com which is extended to port 81 (http://subdomain.domain.com:81).
We have two zones: Default and Intranet. Both has forms based authentication enabled but only Intranet has NTLM enabled.
In the alternate access mappings we have the following configured:
Internal URL Zone
Public URL for Zone
http://subdomain.domain.com:81 Default
https://subdomain.domain.com
https://subdomain.domain.com Default
https://subdomain.domain.com
http://subdomain.domain.com Intranet
http://subdomain.domain.com
The SharePoint is publishd by Checkpoint on URL: https://subdomain.domain.com and is reachable outside the company only with forms authentication. We can login to http://subdomain.domain.com inside the network with NTLM authentication. The system is working
fine.
However we installed Search Server Express 2010 on all servers and configured it. The main configuration steps were:
content access account setup
full read permission to all zones for content access account
Checked DB permission for content access account
DisableLoopbackCheck configured on all servers
content source is set to http://subdomain.domain.com (Intranet URL?) to use NTLM authentication
Tried to set crowl rule to http://subdomain.domain.com/*
When I start a full crawl I only get one Top Level Error:
The object was not found. ( Error from SharePoint site: HttpStatusCode NotFound The request failed with HTTP status 404: Not Found. )
We also have a developer environment. This environment is a "one men show". All of the roles are on the same machine but all configurations are the same. We also installed Search Server Express 2010 on the developer SharePoint and all works properly.
I googled days and tried a lot of possible solution but nothing helped.
Does anyone have idea what do I wrong?
Thanks!
I'm not a developer! I'm an infrastructure engineer! Please be patient on the development forums! :)

Thanks for the reply.
Loopbackcheck disabled on all servers.
We can browse site on search server.
IIS binding is correct on all SPS servers.
We have no entry on host file.
Edit: I have to correct myself! Some of the administrators (I think) set host host file. I rechecked after Inderjeet comment and this resolved this issue.
Thanks to pointing me to double check allways if I think something is correct. (Anyway this was the only thing I didn't rechecked).
Thanks!
I'm not a developer! I'm an infrastructure engineer! Please be patient on the development forums! :)

Supporting objects was not installed successfully from the APEX 3.2 to 4.1

Hi, gurus:
greetings! I have a question regarding migrating application from 3.2 to 4.1. I need to migrate an application in a APEX 3.2 workspace to a new workspace of APEX 4.1. I exported the application from the APEX 3.2 workspace and imported it again to workspace of APEX 4.1, everything works fine except supporting objects was not installed successfully, and the application cannot show images. Could anyone give me a hint to find the cause and solution?
Thanks a lot!
Sam

Hi, Tony:
Nice to see you again! :) It proved out that was due to the wrong file format, I should choose UNIX file format to export my application from APEX 3.2 workspace instead of choosing DOS file format to export. Though I am still confused, Why this does matter? I used to export and import with random file type, as long as I keep consistency of file type for export and import, it never give me trouble like this.
I got the following error message
The following prerequisite checks failed. Installation of this application's supporting objects cannot continue until these issues are resolved.
To continue installation after addressing the errors, navigate to the Supporting Object Definitions of this application and click INSTALL in the Supporting Objects Installation section.
Alternatively, you can deinstall the application definition and reinstall after resolving these issues.
Object Names: EBA_CUST_ACTIVITY_TYPES, EBA_CUST_ADMINISTRATORS, EBA_CUST_ASSOCIATIONS, EBA_CUST_CATEGORIES, EBA_CUST_CONTACTS, EBA_CUST_CONTACT_TYPES, EBA_CUST_CUSTOMERS, EBA_CUST_CUST_ACTIVITY, EBA_CUST_LINKS, EBA_CUST_STATUS, EBA_CUST_VIEWS_LOG, EBA_CUST
Sam
Edited by: lxiscas on Dec 11, 2012 7:06 AM

Show Database Get "Object was not found"error

Hi there,
I have a weird situation here.
I created Data Guard Broker setup and show configuration return good result.
It is running for quite a while, and I can see if I switch log file on Primary, the Max Seq# is matched between Primary and Standby. Also do a lot of other test query all return good result.
But today when I happen to run Show Database command it says the DB object not found,
and there is no error in DRCxxx.log file.
Did I miss something? Any suggestions are appreciated.
===============Script===================
--Standby
mkdir log1/dgbroker
mkdir log1/dgbroker/XXXPRD2R
mkdir log2/dgbroker
mkdir log2/dgbroker/XXXPRD2R
--Primary
mkdir log1/dgbroker
mkdir log1/dgbroker/XXXPRD2
mkdir log2/dgbroker
mkdir log2/dgbroker/XXXPRD2
-- primary
alter system set dg_broker_config_file1='/oracle/log1/dgbroker/XXXPRD2/dg1XXXPRD2.dat' scope=both;
alter system set dg_broker_config_file2='/oracle/log2/dgbroker/XXXPRD2/dg2XXXPRD2.dat' scope=both;
-- standby
alter system set dg_broker_config_file1='/oracle/log1/dgbroker/XXXPRD2R/dg1XXXPRD2R.dat' scope=both;
alter system set dg_broker_config_file2='/oracle/log2/dgbroker/XXXPRD2R/dg2XXXPRD2R.dat' scope=both;
-- primary
alter system set dg_broker_start=true scope=both;
-- standby
alter system set dg_broker_start=true scope=both;
-- primary
dgmgrl /
create configuration 'dg_XXXPRD2' as primary database is 'XXXPRD2' connect identifier is 'XXXPRD2';
add database 'XXXPRD2R' as connect identifier is 'XXXPRD2R' maintained as physical;
enable configuration;
===============Script===================
DGMGRL> show configuration
Configuration - dg_XXXPRD2
Protection Mode: MaxAvailability
Databases:
XXXPRD2 - Primary database
XXXPRD2R - Physical standby database
Fast-Start Failover: DISABLED
Configuration Status:
SUCCESS
DGMGRL> SHOW DATABASE XXXPRD2
Object "XXXPRD2" was not found
DGMGRL> show database XXXPRD2R
Object "XXXPRD2R" was not found
-----------------------------------------------

Hello;
What I have noticed is sometimes single quotes count and sometime they don't.
Try :
SHOW DATABASE 'XXXPRD2';
Test
Welcome to DGMGRL, type "help" for information.
Connected.
DGMGRL> show database standby
Object "standby" was not found
DGMGRL> show database 'standby';
Object "standby" was not found
DGMGRL> show database 'STANDBY';
Database - STANDBY
Role:            PHYSICAL STANDBY
Intended State: APPLY-ON
Transport Lag:   (unknown)
Apply Lag:
Real Time Query: OFF
Instance(s):
    STANDBYSo getting the case matters too.
DGMGRL> SHOW DATABASE STANDBY;
Object "standby" was not found
DGMGRL> Best Regards
mseberg
Edited by: mseberg on Jan 18, 2013 2:21 PM

ORA-39166: Object was not found in impdp

I am trying to do an impdp to another database.
Both databases are 11g on AIX.
This is the command I use.
impdp &dUSR/&dPASS@&dCONN REMAP_SCHEMA=&uUSR:&dUSR directory=DATA_PUMP_DIR dumpfile=file.dmp logfile=...log content=DATA_ONLY table_exists_action=truncate 'TABLES=(table1,table2,...)'
&dUSR is for destination databsse.
&uUSR is for source database.
I am getting the following errors:
======================
ORA-39166: Object TAR.TABLE1 was not found.
ORA-39166: Object TAR.TABLE2 was not found.
======================
When import command was modified (table1 -> &uUSR.table1) so it becomes:
impdp &dUSR/&dPASS@&dCONN REMAP_SCHEMA=&uUSR:&dUSR directory=DATA_PUMP_DIR dumpfile=file.dmp logfile=...log content=DATA_ONLY table_exists_action=truncate 'TABLES=(&uUSR.table1,&uUSR.table2,...)'
The import works. I am already using REMAP_SCHEMA so why is this necessary?

VST,
Expdp was done as tables=foo rather than tables=user2.foo.This means that the foo table that is in the dumpfile would have to be originally in the schema running the job. So, let's say your export was
expdp user1/pass1 tables=foo dumpfile=mydump.dmp ...
This means that table user1.foo would have to exist (or you would get an export error) and this table would be in the dumpfile.
So the bottom line is to transfer between databases and schemas I need to use schema either during expdp or impdp and remap_schema is still necessary?If you want the table user1.foo to be imported into the target database, all you need to do is run either this command:
impdp any_prived_user/password full=y dumpfile=mydump.dmp ...
-- this would require that the user1 is already created in the target database. It will create table user1.foo
or this command:
impdp user1/password full=y dumpfile=mydump.dmp ...
-- this would require that the user1 exists because you are running the job from user1.
If you want this to go into another schema, then you will need to use remap_schema in the impdp command.
Hppe this helps
Dean

Failed object is Object ID not the JDO Instance

Hi guys,
With 2.3.0B5, I tried parsing the JDOUserException thrown when an opt lock failure occurs. I found
that the nested JDOException had a failed object as I expected. But the failed object was not the
JDO instance but rather it's object id. Thinking this strange, I looked over the spec, and sure
enough it is unspecific about the object that should be returned as the failed object. I suspect
that the spec is unspecific because no one consider the possibility of using anything other than the
JDO instance. It certainly makes sense to me that it would be the JDO instance since one reason for
parsing the exception is to evict the offending instances.
David Ezzio

Good point. We'll try to change it to the actual object.

Oracle Connection object is not getting instantiated

We have a Web application developed in .net (code behind vb.net) using Visual Studio 2003 and Oracle Database 10G version 10.1.0.2. We have a test machine which we use to test our Web application with the same version of oracle. Our web application was working fine in that test machine until Oracle got corrupted in the that machine. After that I reinstalled Oracle 10G and when I tried to run the web application it threw an exception saying "Object Reference Not set to instance of an Object". When I went into that problem a bit deeper , I came to know that Oracle Connection Object was not getting instantiated (ie OracleConnection object=nothing). At the same time the web application is working fine in my machine. One of my friend suggested me that I have to register some of the Oracle DLL files using regsvr32 utility. But he is not sure which DLL to be registered. Also we do have a Windows Application developed in .net using the same VS2003 and oracle 10 G which is running fine in the same test machine.

Thanks for the reply. I was desperately waiting for that.
I found the following result when I run the gacutil utility on my machine.
The Global Assembly Cache contains the following assemblies:
Oracle.DataAccess,version=10.2.0.100, Culture=nuetral, PublicKeyToken=89b483f429c47342, Custom=null
The cache of ngen files contains the following entries:
Number of items = 1
But when I used the same utility on the test machine it resulted as follows
The Global Assembly Cache contains the following assemblies:
Oracle.DataAccess,version=10.1.0.200, Culture=nuetral, PublicKeyToken=89b483f429c47342, Custom=null
The cache of ngen files contains the following entries:
Number of items = 1
That is there was change in the version of ODP.net what I use in my machine and Test Machine. But I clearly remember that I have installed Data Access layer DLL's of the web project from my machine to the test machine and were running successfully befor eoracle got re installed on that test machine.

I am Executing a transaction but No Business Object was found

Hi,
I am Executing a transaction but No Business Object was found. In the CDHDR table also no entry was found.
If i Create a Z- Business Object , Can You tell me where i can give the start condition.
Can one tell me what steps i have to do if the Standard Business Object was not found.
Regards,
Surjith

Hi Surjith,
If you check the package which this transaction belongs to (CK) you won't find an existing business object indeed.
However did you also try to search for different packages belonging to the same application component, in your case this is CO-PC-PCP
I did a quick check and found BO's BUS2044 and BUS204401 belonging to package CKJ8. Other business objects may exist belonging to the same application component, just use SE80 to find this out.
Kind regards, Rob Dielemans

Error in ExecFormMode: Object reference not set...Enprise Job Costing

Partner Add-on: Enprise Job Costing Version 245
SAP 2007A SP01 PL05
Open Job window -> trying to create the first job in a new company -> Add mode -> Get the error message:
Error in ExecFormMode: Object reference not set to an instance of an object
Thanks.

This error was resolved in the job costing version 8.00.248. The problem was a field name conflict occurring in SBO 2007A SP01 PL08 and higher and SBO 8.8 PL08 and higher with Enprise Job Costing versions earlier than 8.00.248. The Enprise partner support website has an important note explaining this on the home page - www.enprise.com/partner
Regards,
Lianne Plant
Support Manager

Using a Variable in SSIS - Error - "Command text was not set for the command object.".

Hi All,
I am using a OLE DB Source in my dataflow component and want to select SQL Query from the master table I have created variables v_Archivequery
String packageLevel (to store the query).
<Variable Name="V_Archivequery" DataType="String">
     SELECT a.*, b.BBxKey as Archive_BBxKey, b.RowChecksum as Archive_RowChecksum
     FROM dbo.ImportBBxFbcci a LEFT OUTER JOIN Archive.dbo.ArchiveBBxFbcci b
     ON (SUBSTRING(a.Col001,1,4) + SUBSTRING(a.Col002,1,10)) = b.BBxKey
     Where (b.LatestVersion = 1 OR b.LatestVersion IS NULL)
    </Variable>
I am assigning this query to the v_Archivequery variable, "SELECT a.*, b.BBxKey as Archive_BBxKey, b.RowChecksum as Archive_RowChecksum
FROM dbo.ImportBBxFbcci a LEFT OUTER JOIN Archive.dbo.ArchiveBBxFbcci b
ON (SUBSTRING(a.Col001,1,4) + SUBSTRING(a.Col002,1,10)) = b.BBxKey
Where (b.LatestVersion = 1 OR b.LatestVersion IS NULL)"
Now in the OLE Db source, I have selected as Sql Command from Variable, and I am getting the variable, v_Archivequery .
But when I am generating the package and when running I am getting bewlo errror
Error at Data Flow Task [OLE DB Source [1]]: An OLE DB error has occurred. Error code: 0x80040E0C.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E0C Description: "Command text was not set for the command object.".
Can Someone guide me whr am going wrong?
Please let me know where am going wrong?
Thanks in advance.
Thankx & regards, Vipin jha MCP

What happens if you hit Preview button in OLE DB Source Editor? Also you can use the same query by selecting SQL Command option and test.
Could you try set the Delay Validation = True at Package and re-run ?
If set the query in variable expression (not in value), then Set Evaluate As Expression = True.
-Vaibhav Chaudhari

CK11N, object was not costed

Similar Messages

Maybe you are looking for