CK11n with activity prices from different plan versions

Hello,
We are looking for a simple & practical way to calculate a standard cost estimate for a material using activity prices from different CO plan version.
In the valuation variant of the costing variant the CO plan version is determined from where the activity prices are taken, eg version 0
So, we want to cost the same material using the activity prices of a different plan version, eg 90, or 91 ... but without using a different costing variant per CO plan version(so without having to create/customize a separate costing variant per CO plan version)
Is this possible?
Can we use costing versions in this respect?
Many thanks
Alain

Hi,
Thanks for quick feedback ... but how do you assign this valuation variant in the costing version... ?
Can you enter is in CK11n? or what transaction needs to be customized?
Thanks, Alain

Similar Messages

Costing on Internal Orders with different plan versions

Hi,
Is it possible to carry out Costing on Internal Orders using different plan versions?
I would like to carry out more than one costing on Internal Order so that I could compare different versions. Maybe there are other parameters (other than plan versions) which can be used for executing different parallel costing.
Best wishes,
Karol

Hi Karol,
In Release 3.0, the following new planning functions are available in order planning:
<b>Copy plan versions</b>
In Release 3.0, you can plan order costs for internal orders in different versions. In contrast to earlier releases, you can now
1. change versions
2. copy versions
3. Here you can select :
the planned values to be copied: annual or total values
whether the planned values in the target version are to be retained or overwritten compare versions using the information system
Planned values are not revaluated in the target version (for example, when you change the value date).
Overhead and settlements are not copied and, if required, must be repeated in the target version
Regards,
Hemachandra K S
<b>Please, donot forget to mark the answer as Helpful, Very Helpful or Problem solved.</b>

Query to compare different Plan versions in CCA

My requirement is to create a Cost Center query that compares two different plan versions, selected by the user with different time periods. We do not use any SEM functionality and are in version 3.0B.
There is a standard R3 report but this gives a total figure and does not split the figures by periods.
Does anyone know a Business Content query that can resolve this issue?

Hi ,
Instead of going for a business content query u can go for a formula variable using replacement path and assign the required values for the output and in that by using the customer exit with the help of abapers
Hope this will be a clear solution to ur problem
Pls assign full points if answer is satisfied
Regards ,
Subash Balakrishann

Multiple keyfigure from different planning area based on attribute value

Multiple keyfigure from different planning area based on the attribute value of Cost element charac.
I need to obtain the value of the attribute in a fox function. Let me explain it further.
Background :
Planning area -
Charac----
KF
area1 -
Payscale group--- Amount
Cost element------AmountVR
area2--Payscalegroup----KF1
KF2
KF3
Cost Element has an attribute "Type"
Value for attribute "Type" = 1,2,3
Based on the value of the attribute, the corresponding KF needs to be multiplied.
Logic :
If type = 1.
AmountVR = Amount * KF1.
elseif type = 2.
AmountVR = Amount * KF2.
elseif type = 3.
AmountVR = Amount * KF3.
endif.
The problem I'm facing is that I'm not able to read the data of attribute "Type". None of the below statement retrieve the value of the "Type".
TYPE = ATRV(Attribute,COSTELEMENT,CO_AREA)
or
TYPE = ATRV(Attribute,COSTELEMENT)
Could you please help me in reading from a time dependent compounding InfoObject?
Regards,
Raghu

Hi..
Thanx Bindu..
I have actual data for Month days..if i am craeting in same layout it is too large.
that's why i am creating two layouts.
below example for better undersatnding.
Actual:
D1 :D2: D3 :D4 : D5 :D6 : D7   : FULLACT (sume of C(1) sum of d1 to d7))
10 :8 :12 : 10 : 14   : 6 : 10    : 70
Plan:
D1EST : D2EST: D3EST :D4EST :D5EST: D6EST: D7EST: FULLEST (sum of d1 to d7)
10         :10        : 10      : 10      :10       :    10    :     10 :         70
How can i read FULLACT value and that value i have to distribute equally in planing layout and always FULLEST is equal to FULLACT.if not equal i have to throug error message hoe can i setup if you have sample code can you send it to me.
what is your idea....
Edited by: Eyda rose on Jun 4, 2008 4:59 PM

Different plan version for some scenarios in MSS

Hi guys,
Some scenarios of the MSS need to be referenced to another plan version different than the current active.
Then, I'm trying to configuring my Object and Data Provider with the requisites needed. The issue is that how can I tell the system that the plan version is another one??
Any idea??
Thanks for your answers.

Firstly, try to check whether the correct smartform is getting picked or a different form is getting picked. TO identify, set soft break-point inside your program lines or use SF_TRACE.
If it is still picking the same smartform, and it is not showing your changes.. then goto form attributes and check whether it is translated to all languages or not?
I guess, because of one of the above two problems it is not displaying your form correctly.
Regards,
SR

Running managed servers from different WL versions under a domain

Hi,
Would it be possible to run managed servers (in non clustered way) from different versions of WebLogic under a single domain, with admin server of higher WebLogic version controlling the domain and the managed servers?
Regards,
Gobi

Hi Gobi,
we can make it run such a way but it may lead to many complication with patch sets.
Few thing work in one environment and other will not so it is not at all recommended way to set such configuration.
Regards,
Kal

Creation Of A Single Purchase Requisition From Different Planned Orders

Hi,
After MRP run i get different Planned Orders for different raw materials . My requirement is that can i combine all the Planned Orders for diiferent materials into a single Purchase Requisition.This is a urgent requirement.
If useful i will award points.
Regards
Jimmy

Hi,
it is not possible to combine with planned orders for different materials into single PR but differet PR can combine into a single Purchase Order.
pls let me know any clarification.
thanks
mohan
Message was edited by:
Mohan Ramalingam

HR Org Replication into different plan version in SRM

Dear SRM Gurus,
I have an org plan in HR (Plan Version 01) which I want to replicate into a newly created plan version "EL" in SRM. But this at the moment is not my "current plan version". So only after replication is successfully I want to change "current plan version" in SRM from "01" to "EL".
Question: is there any place where I can decide, into which SRM plan version I want to replicate my HR Org-Plan into?
Thanks and kind regards
Julian

You can implement this badi HRALE00OUTBOUND_IDOC and set dummy addresses. Or put a filter at the model view for the infotype 0006
Regards, IA

DIFFERENT PLAN VERSIONS (NEWBIE ?S)

HI FOLKS,
PLZ COULD SOMEONE BRIEF ME ABOUT PLAN VERSIONS LIKE 0,1,99.
DIFFERENTIATE PALN VALUES VS FORCAST VALUES
I KNOW THEY ARE KIND OF SILLY QUESTIONS DESERVE NOT BE POSTED IN THIS EXPERT FORUM (.^.)
BUT ...
REGARDS,
AXEL

Usually version 0 is actual version
You can create as many verions as you like, but give meaningfull text to the versions, so that you know what those versions are used for.
In most places, plan and forecast are interchangabily used. Budgetting is usually yearly planning. Forecasting is usually rolling and monthly planning. Depending on the company you have 1 year, 3 year, 5 year planning / forecasting. It is always better to ask the people you are working with as to what the terminology used at their site.
Hope this helps.
NS

Data copy to from different scenario, version to one scenario version

Hi,
I have this scenario to do.
Copy data from 3 scenario version to one scenario version.
Scenario1 -> final to TargetScenario -> working
Scenario2 -> final to TargetScenario -> working
Scenario3 -> final to TargetScenario -> working
Means 3 scenario data into one
Sum of all three
I am using Datacopy command to target but this is wiping out previous scenario data
Any thoughts which command to use or else???

You cannot use DATACOPY here.
Create a calculation script which does fix on working
Target scenario= scenario1->final+scenario2->final+scenario3->final;
Regards
Celvin
http://www.orayplabs.com
Please mark responses as helpful/correct if applicable

Using a different Plan Version in WIP calculation

Hi experts.
I am using version 97 as plan in a wip calculation. The problem is that to recognize plan incomings my system uses version 0 and in the result analysis they always appear as 0 because the version the system is taking to recover the planned incomings is 97 and it is empty.
Is there any standard way to make it take version 97 only for costs?.
Thanks.
Alex

yes. this is true, the predicates are not preserved, I found that out after posting. ok, Im really thinking bug here, I'll explain further.
Im outside of prod time so can run the mview. the plan is pretty big so not going to post just yet, its just behavioural at this stage.
explain for QUERY, = plan good.
create table t1 as QUERY = plan good.
insert to table as QUERY = plan good
create mview as QUERY = plan bad. Not just timings are bad, the plan has completely changed. I stop the mview creation at this stage. good old ctrl+c.
the only thing thats different is Im running MVIEW create. So I hit my ADDM again, can see the bad plan and bad timings. So I get the SQL_ID from the ADDM for the bad plan and run a 10053 on it using the 11.2 sqldiag dump. Im hoping to see why its choosing the bad path
execute DBMS_SQLDIAG.DUMP_TRACE(p_sql_id=>'576wpd5g73q9c', p_child_number=>0, p_component=>'Compiler', p_file_id=>'BAD1');
edit my BAD1 10053 trace file and I see...the plan is GOOD. Its estimated 2 seconds to run for the SQL_ID thats actually bad when running.
This is why Im thinking bug.

Issues with activation of the Illustrator trial version

Hi there,
I have just downloaded the Illustrator CS6 trial version and the download appeared to be successful. I was then prompted to sign in to Adobe to activate the trial and when I input my details the following pop up message comes up:
Error:
703b1cde-2b29-423a-8784-fba7e12f17b8
Please try again later.
I am then unable to close this window. I have restarted my computer 3 times (in order to close the window) and keep getting the same error message. This is preventing me from opening the trial version of Illustrator.
I am running on Windows 7 Home Premium. I also have the latest full Photoshop version on my computer which was successfully downloaded and I haven't had any issues with this (however, in saying this, never downloaded the trial version).
Please could you urgently help with this matter.
Many thanks,
Bree

Actually I've just realised that it is a different error message each time. This was another error message:
There was an error with this action. Try again later.
bddabcd4-0bee-4aad-8237-0d256108c82c
Thanks for your help (hopefully!).
Bree

Need help with master detail from different datasets

I have xml data from three different datasets that I want to use in a master detail region.
So initially, a list of model codes is displayed. When the user clicks on a specific model, the model inputs appear in the detail region. One of these inputs is a list of map units. I also want a real name description of the map unit to be displayed. It's working for one map code, but not for all of them.
My question is: "How do I get the description to disply for each of the map codes?"
Here is my code:
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Untitled Document</title>
<script src="/SpryAssets/xpath.js" type="text/javascript"></script>
<script src="/SpryAssets/SpryData.js" type="text/javascript"></script>
<link href="/SpryAssets/SprySpotlightColumn.css" rel="stylesheet" type="text/css" />
<script type="text/javascript">
var DSpresence = new Spry.Data.XMLDataSet("/SpeciesReview/Copy of tblSppMapUnitPres.xml", "dataroot/Copy_x0020_of_x0020_tblSppMapUnitPres");
var DSancillary = new Spry.Data.XMLDataSet("/SpeciesReview/ModelingAncillarywname.xml", "dataroot/Sheet1", {sortOnLoad: "CommonName", sortOrderOnLoad: "ascending"});
var DSpresence2 = new Spry.Data.XMLDataSet("/SpeciesReview/Copy of tblSppMapUnitPres.xml", "dataroot/Copy_x0020_of_x0020_tblSppMapUnitPres[strSpeciesModelCode='DSancillary::strSpec iesModelCode']");
var dsMUDescription = new Spry.Data.XMLDataSet("/SpeciesReview/tblMapUnitDesc.xml", "dataroot/tblMapUnitDesc");
var dsMUDescription2= new Spry.Data.XMLDataSet("/SpeciesReview/tblMapUnitDesc.xml", "dataroot/tblMapUnitDesc[intLSGapMapCode='{DSpresence2::intLSGapMapCode}']");
</script>
</head>
<body>
<div style="width: 100%">
<div id="Species_DIV" spry:region="DSancillary DSpresence dsMUDescription" width="50%" style="float:left">
<table id="DSancillary">
<tr>
<th>Species Code</th>
</tr>
<tr spry:repeat="DSancillary" "DSpresence" "dsMUDescription" spry:setrow="DSancillary" >
<td>{strSpeciesModelCode}</td>
</tr>
</table>
    </div>
<div id="Species_Detail_DIV" spry:detailregion="DSancillary DSpresence dsMUDescription" style="float:right; margin-top:20px; width: 40%">
    <table id="Species_Detail_Table" >
      <tr width="100%">
      <th style="font-family:Verdana, Geneva, sans-serif; font-size:14px; background-color:#CCCCCC; font-weight:bold">Modeling variables used for {strSpeciesModelCode}</th>
      </tr>
        <tr>
          <td spry:if="'{memModelNotes}' != ''">Hand Model Notes: {DSancillary::memModelNotes}</td></tr>
           <tr>
            <td spry:if="'{DSancillary::ysnHydroFW}' == 1">HydroFW: {DSancillary::ysnHydroFW}<br />Buffer from flowing water: {DSancillary::intFromBuffFW}<br />
            Buffer into flowing water: {DSancillary::intIntoBuffFW}
            </td></tr>
            <tr>
            <td spry:if="'{DSancillary::ysnHydroOW}' == 1"> Buffer from open water: {DSancillary::intFromBuffFW}<br />Buffer into open water: {DSancillary::intIntoBuffOW}</td></tr>
      <tr><td><br /></td></tr>
       <tr><th>Mapcode:</th></tr>
    <tr spry:repeat="DSpresence">
            <td spry:if="'{DSpresence::ysnPres}' == '1'">{DSpresence::intLSGapMapCode}</td><td spry:if= "'{DSpresence::intLSGapMapCode}'=='{dsMUDescription::intLSGapMapCode}'">{dsMUDescription: :strLSGapName}</td>
        </tr>
        <tr><td><ul>
            <li spry:repeat="DSpresence" spry:if="'{DSpresence::ysnPres}' == '1'">{DSpresence::intLSGapMapCode}{dsMUDescription::intLSGapMapCode}</li>
        </ul></td></tr>
    </table>
    </div>
</div>
</body>

The best way to do this is to use xPath filtering. This http://labs.adobe.com/technologies/spry/samples/data_region/FilterXPath_with_params.html example will give you the general idea.
The example uses a URL variable but there is no need for that if you use a procedure similar to
function newXPath(cat){
DSpresence.setXPath("dataroot/Copy_x0020_of_x0020_tblSppMapUnitPres[strSpeciesModelCode=' {DSpresence::strSpeciesModelCode}']");
    DSpresence.loadData();
The function can be triggered with an onclick event placed on {strSpeciesModelCode}
Gramps

Stock transfer with incorrect price from MRP

Hi.
I have material with special procurement 40 (MRP2 view).
Special procurement is for stock transfer from other plant.
When I run MRP with MD03 transaction, PR for transfer is created, but value price (EBAN-PREIS) is incorrect since that Value price is obteined from target plant, instead should be obteined from supplying (issing) plant.
Therefore when I create PR manually with ME51N transaction, value price is obteined from supplying plant.
I have ECC 6.0 wtith Support Package SAPKH60407 installed.
Does anyone can help me?
BR
JB

Hi.
I have material with special procurement 40 (MRP2 view).
Special procurement is for stock transfer from other plant.
When I run MRP with MD03 transaction, PR for transfer is created, but value price (EBAN-PREIS) is incorrect since that Value price is obteined from target plant, instead should be obteined from supplying (issing) plant.
Therefore when I create PR manually with ME51N transaction, value price is obteined from supplying plant.
I have ECC 6.0 wtith Support Package SAPKH60407 installed.
Does anyone can help me?
BR
JB

Concatenate tables with same name from different servers - CR2013

Hello,
I need some help. I need data from 2 tables with the same name on different SQL servers thru an ODBC connection. When I try to get the data by adding both to my datasource I get data from one or the other. I have considered creating a view, but not sure how to handle this. Thanks.

Hi,
Linked Servers are pretty simple and straightforward, just do a search for the procedure.
I do have an additional comment, though. Depending on what tables you're gathering, I've found noticeable differences in performance when I use a connector to a DB on Server Instance "A" linked to "B" versus Server Instance B linked to A. I haven't determined the circumstances affecting one over the other.
If I'm not happy with speed using a connector A, I try switching to B. I like to use as much SQL code as possible, but you can't get around the connector still being a factor.
Matt

CK11n with activity prices from different plan versions

Similar Messages

Maybe you are looking for