CK11N: Wrong Error Msg CK 229 (No routing could be found)

Hi
When I am running cost estimate for a material which is sub-contracted outside, system is giving error msg CK 229 that "NO Routing Could be found"... Since, this material is sub-contracted, it won't have any
routing
In OPR4_CK, CK 229 is defined as a error msg...
But earlier, we have released std cost estimates for many such sub- contracted materials and system never used to give us this msg
If I change CK 229 to warning, it will be problem because for Internally manufactured materials routing is MUST and system will just give a warning msg if no routing is found....
What we are expecting is the behaviour as before.. i.e. for sub- contracted materials, message CK 229 should not be issued as error msg.. But for non-sub contracted materials, it should be error msg
Regards
Ajay

Dear Ajay,
1.First ensure that sub-contracted material has got a valid sub-contracting info record maintained
through ME11 against a vendor.The sub-contracting charges will be maintyaine here.
2.Ensure the source list is maintained for material and vendor combination through ME01.
3.Ensure the costing variant used in CK11N has the proper priorities maintained for it,say for Eg PPC1
is used,check in OKKN for this costing variant it has proper priority say first may be for planned
price,second may be based on value in purchase info record.
4.Generally for a sub-contracted material the system sometimes shows error message as no souce list
exists,but routing will be created only for an In-house manufactured products with the procurement type
E.For a sub-conracted material check the procurement type is E and special procurement value is 30 in
MRP2 view of the material master.
Check and revert back.
Regards
Mangalraj.S

Similar Messages

  • Firefox crashes and when attempting to launch after the crash it won't and throw and error msg that js.3250 can't be found- but same file is in Mozilla directory. I must then download new 3.6.8 and lose all tabs.

    # Question
    Firefox crashes and when attempting to launch after the crash it won't launch; throwing an error msg that " js.3250 can't be found" - but same file is in Mozilla directory.
    I must then download new 3.6.8 and lose all tabs and history.

    I have a similar problem. Recently my FF8 has been crashing a lot. It regularly locks up an entire core of my PC and often just shuts down. It has just done it a moment ago and when it started back up it did the whole "this is embarrassing" thing and asked me if I wanted to reload my tabs. I deselected the one that I was trying to view as I suspected that it may have been the cause (unlikely; it was node4.co.uk) but anyway, let's skip it just in case. Click on the button to restore and up pops my homepage only. So all of my other tabs, which I was using for work incidentally, are gone.
    This is not the first time this has happened on FF8. It happened a lot recently on FF6 I think it was (so hard to keep track now, Mozilla) and I switched to Chrome as a result, but it turns out that it crashes even more than FF6 did. FF7 was a vast improvement but FF8 is so unstable/unpredictable for me at the moment that I think I'd rather use IE9 than this. It's driving me mental, clearly! I wish I could kill the process manually and have it retry restoring tabs. Hey, there's an idea Mozilla; give us a menu item that allows us to restore the session to how it started to try again or at the very least get a list of the pages we were looking at. They don't show up in Recently Closed Windows and the Restore Previous Session is greyed out too. Gah! Help!

  • Error msg. states: the iPad "iPad" could not be updated. An unknow error occurrred (-1).

    error msg. states: the iPad "iPad" could not be updated. An unknown error occurred (-1). My iPad is 16gb series 2 i believe  wifi enabled

    Hey there charlottefromwilliamsburg,
    I see that you are experiencing and issue when attempting to update your iPad. Here is an article for you that may help you address this error:
    Resolve iOS update and restore errors - Apple Support
    http://support.apple.com/en-kw/TS3694
    I would suggest that you particularly pay attention to the information in the following section, which addresses error codes such as the one you have been given:
    Check for hardware issues
    Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
    Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
    Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
    Confirm that your security software and settings are allowing communication between your device and update servers.
    If you still see the error message when you update or restore, contact Apple support.
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • Cannot update.  Get error message 1648, "no valid sequence could be found for the set of patches."

    Cannot update.  Get error message 1648, "no valid sequence could be found for the set of patches."

    Uninstall the corrupt Reader version using http://labs.adobe.com/downloads/acrobatcleaner.html then download and install the latest Reader from http://get.adobe.com/reader/enterprise/

  • Getting error as :  log4j : WARN No appenders could be found for logger

    Hi all,
    I am using IBM - Rational Application Developer (RAD) for the development of my project service task.
    I am trying to use log4j to log various events like errors and warnings and so on ....
    But I am getting following errors in console window of RAD :
    {color:#ff0000}
    [8/5/08 10:12:18:001 IST] 00000038 SystemErr R log4j:WARN No appenders could be found for logger (VINValidationService).
    [8/5/08 10:12:18:001 IST] 00000038 SystemErr R log4j:WARN Please initialize the log4j system properly.{color}
    If you have any clue regarding how to get out of this then it would be of great help to me .... please reply soon ....!
    (Please note that I have tried all the ways of setting CLASSPATHS and BUILDPATHS in the RAD) .
    --- Thanking you in advance ...
    Akshay_L.

    You could read these to get some hints [http://www.google.co.uk/search?q=%22Please+initialize+the+log4j+system+properly.%22]
    The first reply to the first hit on google says "log4j.properties needs to be on the classpath where log4j can find it.".
    You can set the system property if you wish but the classpath approach is the easiest in my opinion.

  • Error msg "Firefox setup stub 27_0_1_exe could not be downloaded." Why?

    Using the following link Every time I try to download firefox, I get the error message.
    http://www.mozilla.org/en-US/firefox/new/#download-fx
    Firefox setup stub 27_0_1_exe could not be downloaded. I am using Vista 32b OS, IE9 browser

    Try downloading the full off-line installer package from here. <br />
    http://www.mozilla.com/en-US/firefox/all.html

  • LE7 error msg: no appl support for synsonus.bundle found

    If anybody knows how to get rid of this, I'd be eternally grateful. Wreaking havoc with LE7. Thanks

    found a link on Cubase forum that supplied what LE7 was looking for. Whew!

  • I am having trouble synching picture to my iPad - getting error msg - required file cannot be found

    When trying to synch my photos to my ipad or iphone -  I get an error msg that says require file cannot be found.. pls help!!

    Some things to try in this order:
    1) Make sure you designated the correct folders for music, etc.
    2) Press and Hold the Home and Power buttons on the iPad until the Apple Logo appears, about 10 seconds.
    3) Make sure all antivirus and firewalls are off.
    4) Delete and reinstall itunes. (Back up the itunes folder first.)
    Hope this helps...

  • I'm getting the error msg "iphoto library cannot be found".

    I have a MacBook Pro and I'm trying to clean up the hard drive and free up space. I'm getting an error msg that "iphoto library can't be found. Make sure the disk containing your library folder is connected." I'm concerned that I may have deleted important info for iphoto to properly work. I'm unable to get iphoto to work. I also cannot empty the trash because of an error msg that "the operation cannot be completed because the "item" is in use." Even when all applications are closed.
    I'm operating a very old Mac OS X 10.6.8. Although all software is up to date.
    Anyone know how to solve this problem?

    With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/download.htm
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • Reg : error msg population

    Hi
    i got a requirement that from vl02n tcode if some condition fails one error message as to display and cursor has to show where that error msg is.Its should not terminate .i found exit i have code to populate error msg also.
    Please help me regarding this issue
    Thanks in advance
    regards
    Rao

    did you look at Matt's response above your post
    Try to explain in more detail precisely what you have done and what you expect.

  • "no type with this name could be found at this location" error..

    Though my project has been successfully compiled.
    But when I open some specific class, it always comes out some error, says "ERROR: no type with this name could be found at this location". I am not quite clear, because the class underlined is absolutely in the project source folder. :(
    Can anybody tell me what wrong with it?:(

    Hi Tom
    There is a known limitation with Workshop where you would see those errors when the java classes (the types that error out) are part of you webproject itself.
    The classes get compiled and get moved into web-inf\classes folder and somehow IDE does not get to see this in its classpath.
    The workaround is to move those classes into a java project which will get compiled into a jar file that will be part of libraries (goes into APP-INF\lib).
    You should not see those errors after the workaround.
    This is a known limitation addressed via CR277571
    Thanks
    Vimala

  • TS3276 "ERROR" message "No associated application could be found"

    When opening incoming emails on my Mac with links to other websites or for more information, etc.  clicking on these links I receive "ERROR" message reading:  "No associated application could be found".
    I do not have this problem with the same messages on my Ipad.
    My email is handled through Yahoo (ATT) and they have not been helpful.
    Thanks

    Open Safari. From the Safari menu bar click Safari > Preferences then select the General tab.
    Select Safari from the pop up menu next to:  Default web browser
    If that doesn't help, launch Disk Utility located in HD > Applications > Utilities
    Select the startup disk on the left then select the First Aid tab.
    Click:  Verify Disk Permissions
    Restart your Mac when it's finished.
    Try Mail.
    messaged edited by:  cs

  • HT201272 I am trying to down load a movie from Itunes on my ipad but as the download is complete an error msg appears stating download error. I've tried downloading 4 times and the same message. What could be wrong?

    I am trying to down load a movie from Itunes on my ipad but as the download is complete an error msg appears stating download error. I've tried downloading 4 times and the same message. What could be wrong?

    Hello VernonMartin,
    Thanks for the question, and welcome to Apple Support Communities.
    If the error includes a specific code, you can cross reference with these articles:
    iTunes: Possible iTunes Store errors
    http://support.apple.com/kb/ts1424
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Thanks,
    Matt M.

  • I have i pad 2 ios 4.3.1 i want to update it to 4.3.3 but i get error msg 3194 can you tell me what's wrong with apple some people talking about apple don't veryfiy 4.3.3 anymore thanks alot

    i have i pad 2 ios 4.3.1 i want to update it to 4.3.3 but i get error msg 3194 can you tell me what's wrong with apple some people talking about apple don't veryfiy 4.3.3 anymore thanks alot

    4.3.5 is the current version, so that is the version that iTunes will download, not 4.3.3
    In terms of error 3194, have you got the latest version of iTunes on your computer ? - http://support.apple.com/kb/TS3694#error3194

  • TS1717 Installed the iTunes 10 update on my computer (Windows 7).  iTunes will no longer launch and I get no error msg. Tried uninstalling and reinstalling entire app but no help.  Tried setting up a new user, no help.  What's wrong??

    Installed the iTunes 10 update on my computer (Windows 7).  iTunes will no longer launch and I get no error msg. Tried uninstalling and reinstalling entire app but no help. What's the fix??

    Hi sahgin,
    The issue eventually resolved itself, I still don't really know why. I kept up with Windows update, and attempted downloading iTunes again from the Apple website, and it just... worked. It now works fine. I don't know why it took approximately 4 months to work, though.
    I'm sorry I don't have any more helpful information. Posting here was my last resort, and clearly Apple never bothered to reply.

Maybe you are looking for