CKF Calculation error - help appreciated!
Hi,
I am using a CKF in report which uses the logic as below.
CKF = (RKF1 - RKF2)*100/RKF2
The CKF is working fine in Development and Quality environment but it is showing wrong values in Test environment.
I have verified the data with the Infoprovider and R/3 data and it is matching perfect.
As I am displaying only the CKF in the report, I am not able to check the other RKFs' values as well.
Is there a way to debug the query in RSRT to stop at the CKF/RKF part?
If not are there any other suggestions?
Thanks in advance.
Prakash C
If query is working fine in Developmemnt and Quality, then I dont see any issue in the query if there were any issues transporting query.
I would try to match the numbers and see if any records are missing in the report. Sometimes it happens that in testing environment master data load or attribute change run is pending and we have filter/variable on the attributes. Due to this reason, trascational data is present in the cube, but they will not appear in the report.
Try to see the possibility and try to drilldown the report as granular as possible to see which records are not appearing in the report.
Other thing you can do is to transport the same query keeping RKF - Hide (Can be shown) to see the RFK value.
But first try to match the data in report and cube and see what are you missing in the report.
- Danny
Similar Messages
-
When I tried to update my iPad I got an error 9. Now, I am unable to access my iPad. It is in a continuous cycle when I try to update or restore the iPad 2. Plug in to iTunes 12.0.1 (latest version). Click update, told can't update, have to restore. Restore fails with error 9. Any help appreciated.
Here's the cycle:
I plug in my iPad when “cable to iTunes shows on iPad screen. It says "Your iPad can't be updated, you must restore it to factory settings." That bad enough news, but it gets worse.
Click Restore
Extracting software…
Preparing iPad for restore
Waiting for iPad…
Verifying iPad restore with Apple…
(empty bar under the Apple logo…does not show any activity)
“The iPad “iPad” could not be restored. An unknown error occurred (9).”
Notes: I just upgraded to OS X Yosemite 10.10.1 on my iMac (27-inch, Mid 2011) in the last week. It’s the first time I’m tried to backup/update my iPad since the iMac update.
I swapped out the USB cable to a new cable and get the same results.
I also unplugged all other USB devices from the iMac and security on my iPad and still get the same results.
I find it strange that it shows no Serial number for my my iPad 2 when plugged in. It shows “Serial Number: n/a on the screen when it displays: “iPad Recovery Mode To update your iPad without erasing its contents, click Update. To restore your iPad to its factory settings, click Restore iPad.
I prefer to update my iPad, but it displays “Your iPad can’t be updated, you must restore it to factory settings. If you previously backed up the iPad, click Restore Backup after the restore process completes.”
It’s a continuous loop. I get the display on my iPad to plug in the iPad to iTunes, plug it in which ends after going through the above procedure saying an error occurred (9).
So now I cannot use my iPad. When I turn it on I get the display showing me to plug it into iTunes with the cable. Since this is the only option I have I plug it in and the loop begins.
Any advice would be appreciated.
Thanks!Hello jaybearden,
Thanks for the question. After reviewing your post, it sounds like you are not able to restore the iOS device since you get an error 9. I would recommend that you read this article, it may be able to help the issue.
Resolve iOS update and restore errors - Apple Support
Check your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
I can no longer attach files to my outgoing Hotmail emails. I only receive a message where I would expect the Upload to appear that an error has occurred.
I am using a MacBook Pro with Retina, 2 Ghz Intel Core i7, OS X 10.9.4
I have no difficulty attaching files to the outgoing Hotmails on the same account using my iPhone.
Help appreciated.Thanks for this - not an immediate solution I fear but will keep unplugging stuff and restarting stuff.
To try and be clearer about the problem - I have in the last managed to send attachments successfully. Now I can send and receive plain email messages but get the error message when I try to attach an existing file to an email - not just a particular file but it would appear all files are being treated in the same way.
An experiment to send a mail to which an attachment has failed to upload got the following message alongside the SEND button
Files with errors will be removed from the email and not sent.
- but the mail alone was sent and received successfully. Thanks for any pointers you can give me. -
When I attempt to connect to iTunes Store, I receive the following error message: An unknown error has occurred (0x80090318). Any help appreciated!
Hey there Dan256162,
I understand that you are receiving a specific error code when attempting to connect to the iTunes Store, error 0x80090318. I have an article for you that references this code and links you to another article for troubleshooting to address this issue. Here is the article that references the error code:
iTunes: Possible iTunes Store errors - Apple Support
http://support.apple.com/en-us/HT203174
And here is the linked troubleshooting article that will help you resolve the issue:
Apple software on Windows: May see performance issues and blank iTunes Store - Apple Support
http://support.apple.com/en-us/TS4123
Take care, and thanks for visiting the Apple Support Communities.
Cheers,
Braden -
I am having difficulty downloading purchased tunes in iCloud to my PC. I get error code 5000 and a message "not enough access priviledges" I have checked this out and seem to have full rights. I could download tunes before they put them on iCloud. Any help appreciated.
This refers to permissions on your computer which must have been changed. Start by using Disk Utility to repair permissions. Then do the following:
Reset User Permissions and ACLs in Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
From the Utilities menu select Terminal. At the Terminal prompt enter: resetpassword. Press RETURN. When the window opens select your startup drive where it says "Select the volume containing the user account:" At the bottom of the window you will see, "Reset Home folder permissions and ACLs." Click on the Reset button. -
I have bought a new computer and backed up off time machine backup now I cannot open photoshop get error code 150 30 help appreciated.?
Have you updated your iTunes on your computer? WIth a device running iOS7, you need iTunes 11.
When you removed iTUnes, did you see something named 'apple mobile device support' or something like it? (The exact name varies from operating system to operating system). If you see that, uninstall it too. That's the drivers for your iPhone and they should self-install when you plug your device in.
If all that is fine, have you checked your cable and USB port? a malfunctioning cable can keep you from syncing. -
What can I do to get Adobe to download a pdf file it has converted into a doc or docx file? Any help appreciated!
Hi Ebbelby,
You're welcome!
Happy to help
Regards,
Rahul -
Urgent help needed.....any help appreciated....
q, Design and implement a java class called statistics that computes the mean, median, standard deviation. Design and implement a java application called statisticsDriver that generates a list of 50 integers (generated randomly) and prints the statistical measures which are calculated using the Statistis Class. Assume there will be no more then 50 input values. Compute all statical values as floating values.
The above was the question, and below is what i have done so far for the mean part, but it seems to have errors, any help???
p.s I am also confused what it means by driver class, and do i have to do individual classes for the different statistical measures....please helppppp !!!!!!!!!!, any help would be appreciated...thanks.
The class say Mean contains the following method:
public static double mean(double[] data)
double sum=0.0;
for (int index=0; index sum=sum+data[index];
sum=sum/data.length;
return sum;
The driver for this class:
public static void main(java.lang.String[] args) {
double[] myData={2,5,4,6,7,13};
System.out.println("The mean of myData");
System.out.println(Mena.mean(myData));This is my method to work out the mean,median and mode of a set of numbers.
But what i need to do is find the mean, median and mode from a driver class, which generates a list of random numbers, no more then 50. I don't know where to fit this in my method...please help!!!!!!
main:
public static void main(String[] args) {
int[] mainArray = {2,3,6,6,6};
//outputArray( "Original Array: ",mainArray );
System.out.println("average is " + mean( mainArray ));
System.out.println("median is " + median( mainArray ));
System.out.println("mode is " + mode( mainArray ));
//mean
public static double mean(int[] mainArray) {
int sum = 0;
for (int i = 0; i < mainArray.length; i++) {
sum = sum + mainArray;
double average = sum / mainArray.length;
return average;
//median
public static int median(int[] mainArray) {
//double sortList = sort(mainArray);
final int EVEN_NUMBER_OF_ELEMENTS = 0;
int result = mainArray.length % 2;
int median = 0;
// Definition: Median is the Middle number in an odd number of entries array
// Median is the avg of the two number in the center of an even number array
if (result == EVEN_NUMBER_OF_ELEMENTS) {
int rightNumber = mainArray.length / 2;
int leftNumber = rightNumber - 1;
median = (mainArray[rightNumber] + mainArray[leftNumber]) / 2;
else { // Odd number of items, choose the center one
int rightNumber = mainArray.length / 2;
median = mainArray[rightNumber];
return median;
//mode
public static double mode(int[] mainArray)
int mode = 0;
int elements = 0;
int tempMode = mainArray[0];
int temp = 1;
int x;
for( x = 1; x < mainArray.length; x++)
if(mainArray[x-1] == mainArray[x])
temp++;
else
if(temp > elements)
tempMode = mainArray[x-1];
elements = temp;
temp = 1;
else
temp = 1;
if (temp> elements)
tempMode = mainArray[x-1];
mode = tempMode;
return mode;
any help appreciated.. -
I have attempted to upgrade os4 to os7. At the end, it threw an error that i had to turn off "Find my iphone" on my phone, which seems to be impossible at that stage as i could not access beyond the upgrade screen.
I thin chose to set up as new iphone, but icloud has taken an old expired email address for which i do not know the password. icloud will not recognise my current itunes email and password, so i now have os7 but am unable to restore from my itunes back up.
Desperately need help please... Any help appreciated
ThankyouIf you don't know your password, don't know your security questions and don't have a rescue address or don't receive a reset email, you should contact AppleCare who will initially try to assist you with a reset email or if unsuccessful will pass you to the security team to reset your security questions for you.
If you are in a region that doesn't have international telephone support try contacting Apple through iTunes Store Support. -
OCCI VS2005 InstantClient 11_1_0_7 - really close, help appreciated
OK, I have an OCCI app written in VC++8 (DevStudio 2005).
I have downloaded InstantClient 11_1_0_7 Basic plus the SDK.
The program compiles and links, and I am linking against the oraocci11.lib in instantclient_11_1/sdk/lib/msvc/vc8
Note that with this version of the SDK, there is no "debug" version of oraocci11.lib, as there was under 10_3, so I am using the
same one for Release and Debug. For the Debug build, I exclude msvcrt.lib from the default link libraries.
I copy oci.dll, orannzsbb11.dll, and oraocci11.dll from the top-level instantclient directory to the directory with my executable.
Now, if I take the oraocci11.dll from the top-level instantclient directory, and use it, my program runs, and it can createEnvironment,
but then I get the error ORA-24960: the attribute OCI_ATTR_USERNAME is greater than the maximum allowable length of 255.
Searching around suggests that I'm using the wrong DLLs (VC++7) when I get this error.
If I instead take the oraocci11.dll and oraocci11.dll.manifest from the instantclient_11_1/vc8 directory, the program will not start,
I get a Runtime Error R6034 An application has made an attempt to load the C runtime library incorrectly.
I get the same errors on the Release and Debug builds.
Any help appreciated!They say "Using a 32bit DG4ODBC on a 64bit Windows operating system is NOT certified." but we do it extensively and it works just fine. You need to install a 32-bit home and create a listener for the 32-bit gateway. Only downside (aside from maintaining 2 homes) is that if you need to file an SR, you must prove that you're able to reproduce the problem when the gateway is running on a 32-bit OS. We keep a little 32-bit server around for this purpose and point our gateways to that box to reproduce issues for SR's.
If you want to run "certified" all the time, you could leave the gateways running in Production on a 32-bit OS, but it runs considerably slower this way, and all because Oracle won't support your SR's. You have to decide if you really think you'll hit an issue that wouldn't reproduce on the true 32-bit OS and decide if it's worth the risk. We've made our decision...
Good luck! -
"Item 10 IPC:TTE:Calculation error: Pricing error: Mandatory condition & is
Hello Experts,
I need your help to solve this TTE pricing error.
In Service Order, I am getting this error message for one particular material only
"Item 10 IPC:TTE:Calculation error: Pricing error: Mandatory condition & is missing".
Remaining materils I am not getting this error message.
Please proivide your suggestions to crack this.
ThanksHi,
This message come when you caculate 0TTE when doing cross country transactions . Check if this codition needs to be caculated for your order. If it is not required you should not make call .You can try to eliminate this error bu uisng the BADI BADI_TTE_DOCUMENT -
Hi, I have bought a later os from app store but am unable to download it, any help appreciated.
Hi, I have bought a later os from app store but am unable to download it, any help appreciated.
I am using 10.6.8 at the moment and have purchased 10.8. from the App Store.
Went through a long process of registering again, twice, sending in a coded number. To be told that the site is busy at the moment.
Not an easy or a straight forward process, with grammatical errors in the wording of documents.
Hey ho, try again tomorrow, day four.
Thanks for replying. -
I was trying to sync my 120GB iPod Classic earlier, and it said it couldn't sync as the iPod disk could not be "read" or "written to." I now can't get anything onto my iPod, and I was wondering if it is a hard drive problem? Any help appreciated. Thanks.
Did you go into iTunes to change the location of your media files? if not you will need to go into iTunes and click on preference and select the advance tab then click the iTunes Media folder location. Select the location of your on external hard drive.
-
I have tried many times to restore my new IPod Touch 5G in I Tunes and it will not allow me to do it. My Ipod will not turn on at all even when on a fresh charge. Only displays the arrow leading up to ITunes logo. I have tried the method of holding the home button and on button and this does not work. Any help appreciated.
My I Pod was working fine until the day I updated the software to 6.0.1.Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Trying to download itunes onto PC installed with windows vista. Download keeps getting to 99% with 1 second remaining and then freezes / does nothing? Any help appreciated.
I solved the problem! The updates orignally were downloaded to the C: drive of the server. I've since moved them to the E: drive and for some reason the Content folder in IIS didn't change the file path to the new WSUScontent folder.
The root cause for this was failing to use the UTILITY designed for this very purpose.
I edited the virtual directory settings in IIS and was able to put the correct path in.
You still need to use the UTILITY.. to fix all the other stuff you're still missing.
In the %ProgramFiles%\Update Services\Tools folder...
WSUSUTIL MOVECONTENT E:\WSUS E:\WSUS\MoveContent.LOG -SKIPCOPY
This problem was caused by moving the WSUS updates to a different local drive.
No. This problem was caused by IMPROPERLY moving the WSUS updates to a different local drive.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.
Maybe you are looking for
-
If I produce a presentation based on my standard screen resolution (1680 by 1050) and then use a projector which as I understand is 4:3 proportion how is the screen/slide cropped? If I set my slide size to 1200 by 900 then I can see what will happen.
-
Change the image resolution through iPhoto
Does anyone know how to change the image resolution through iPhoto? I know it can be done in other image editing software, but I have yet to find it as an option in iPhoto.
-
Hinted streaming, fast start and the results.
Hi, I put some clips onto a website recently, some were 5 min movies. I was pleased with the results, as the movies started almost immediately on several computers I tried. Unfortunately, the client had to wait over 4 min to see the video. My video w
-
Hi, I have a requirement to read .xml file which has the following data in the file. <WFPaymentAck> <PmtID>500001</PmtID> </WFPaymentAck> I want to read the file and to access the data which is present in <PmtID> tag. i.e., 500001. I tried couple of
-
The print on my Gmail inbox has become too small for me to read
The print on my Gmail inbox has become smaller and difficult for me to read.