CKM Issues

Hi,
I am facing problem in CKM. Each CKM steps are added with colon ( :) in the SQL commands of steps in operator. Because of this all CKM steps are resulting in an error.But when I gone through the CKM steps each step commands are properly written.
Please let me know how can I solve this problem.
Thanks and Regards,
Jai

If you reinstalled the OS again from Nokia, you may just have a defective phone and there could be something wrong with the hardware. I have two N9's and I haven't experience any of these problems.
Can you record these problems and post the link to youtube here so I can see what's happening?
I Choose Nokia!

Similar Messages

Issue to load data from database to XML file. error: ODI-40768

Hi,
While I am trying to load data from database to XML following error is appearing.
ODI-1228: Task TEST_XML_DATA (Integration) fails on the target XML connection MyLOCALXSD.
Caused By: java.sql.SQLException: ODI-40768: Could not save the file <default>:C:\DATA_FILE\www.xml because a class java.io.IOException occurred and said: The filename, directory name, or volume label syntax is incorrect
     at com.sunopsis.jdbc.driver.xml.SnpsXmlFile.writeToFile(SnpsXmlFile.java:751)
     at com.sunopsis.jdbc.driver.xml.SnpsXmlConnection.internalExecute(SnpsXmlConnection.java:769)
     at com.sunopsis.jdbc.driver.xml.SnpsXmlPreparedStatement.execute(SnpsXmlPreparedStatement.java:46)
     at oracle.odi.runtime.agent.execution.sql.SQLCommand.execute(SQLCommand.java:166)
     at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:102)
     at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:1)
     at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:540)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:338)
     at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:263)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:822)
     at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
     at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:83)
     at java.lang.Thread.run(Thread.java:662)
jdbc url: jdbc:snps:xml?d=C:\test_xsd.xsd&s=TESTSQL&re=employeesX&ro=true
physical schema: TESTSQL
Knowledge modules are:
LKM: LKM SQL to SQL
IKM: IKM XML Control Append
CKM: CKM SQL
Parameters set are:
CREATE_XML_FILE: true
XML_PATH:<default>:C:\DATA_FILE\www.xml
I have tried to change the directory path but error is still there.
Could some one please help me to resolve the issue?
Regards,
user1672911

Hi,
The trouble in "<default>:" - if you set XML_PATH as C:\DATA_FILE\www.xml instead <default>:C:\DATA_FILE\www.xml- it will work correctly.
Greetings,
Eugene

Calling pl/sql function in CKM...pls help

Hi,
I have made a call to PL/SQL function in CKM customization. The code is :
declare
L_PMG_VALUE VARCHAR(3);
begin
L_PMG_VALUE:='PMG';
VALIDATE_PMG_VALUE(L_PMG_VALUE);
end;
When i run it, it throws error which says:
6550 : 65000 : java.sql.SQLException: ORA-06550: line 1, column 64:
PLS-00221: 'VALIDATE_PMG_VALUE' is not a procedure or is undefined
ORA-06550: line 1, column 64:
PL/SQL: Statement ignored
Function is compiled in the database and its working. I have selected the Technology as Oracle and correct Schema Name.
Please help

Hi,
try the following way. i have not tried ....i think it helps you.
In which schema you have created that procedure.
Does the ODI user mantioned in topology have execute permissions on the procedure? if the ODI user have execute previlage on the procedure then in CKM customisation call the procedure like <schema>.<procedure>.
Please let me know any issues.
Thanks,

Issue with the upadted database Schema in ODI 11g ?

Hi ,
I am new to ODI .. and i am using ODI 11g .
the problem which i am facing is below stated :
I have an existing interface with both source and target tables its working fine . when there is change in the column in the source and the target table i do the reversed enginnner to get the new colums in the source nad the target schema .
I tried to retain the existing mapping of source and traget by deleting the source schema and replacing it with the newly updated schema in the source colum in the interface .
and drag and drop the the newly updated schema In the target colum in this way i was able to retain the existing mapping ,and did the mapping for the new columns in both .
The problem is that it is running succesful and data for the earlier existing mapping are moving from source to target but not for the newly mapped column .
please help me out in sorting out this issue
the knowlede modules that i am using it are as follows
For LKM i am using LKM SQL to SQL
For CKM - CKM SQL
FOR IKM -IKM SQL Incremental Update

Thanks for the suggestion .i am working with Interface . i implemented that and got the colums without deleting anything ,but when i am mapping the newly upadted colums i am getting an error while executing the Interface .
ODI-1228: Task TARGET_1 (Control) fails on the target connection odipoc.
Caused By: java.sql.SQLSyntaxErrorException: ORA-00904: "COUNTRY": invalid identifier
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:462)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:931)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:481)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:205)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:548)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:217)
at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:1115)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1488)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3769)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3954)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1539)
at oracle.odi.runtime.agent.execution.sql.SQLCommand.execute(SQLCommand.java:163)
at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:102)
at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:1)
at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:558)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:464)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2093)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:366)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:292)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:855)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
at java.lang.Thread.run(Thread.java:662)

Time stamp issue in odi

Hi,
In my interface I am using txt.file as source and target is oracle. Here I am facing problem with time stamp and below are the details provided.
Details: We are getting a flat file from the source in which we are getting one of the columns as time stamp (2013032710101010) and we need to populate it in a stage table column OPTOUT_DATE which is of type DATE.
We are facing issue in loading this TIMESTAMP data into DATE data type.
Km for this is,
Lkm file to sql,
Ikm sql incremental update,
ckm sql.
Can you please suggest us how to handle this.
Thx,
Sahadeva,
9986928587.

Ok thank you..
I have one more doubt this moment.
What it is means, In the Interface level of ODI we have staging are different from target. Here we have SUNOPSIS_MEMORY_ENGINE. Can you please tell what is the use of this in ODI.
1.     How this works internally?
2.     Can we use it as our target/Source as well?
4.     Is it possible to retain data in the memory for later use?
So if you explain me more brief about these three questions that would be very much better and also helpful for me. Because I am going to develop
one POC doc(Proof Of Concept) on this.
Thx,
Sahadeva.

Modified "Create error table" from CKM SQL problem

Hi guys!
I have a strange problem while creating error table by the CKM. I've changed in the interface from flow control to static control and now the command to create error table looks like:
create table STG_TMP.E$_I_D_ASSORTMENT_S
ERR_TYPE VARCHAR2(1 CHAR) NULL,
ERR_MESS VARCHAR2(250 CHAR) NULL,
CHECK_DATE DATE NULL,
ORIGIN VARCHAR2(100 CHAR) NULL,
CONS_NAME VARCHAR2(35 CHAR) NULL,
CONS_TYPE VARCHAR2(2 CHAR) NULL
the create error table(it should create table with all the columns varchar2 and handle the situation when column is number(0,0) => varchar2(255)) step from CKM is:
<%=snpRef.getColList("<?\t", "int vL[POS]=[LONGC]+[SCALE]; if(\u0022[DEST_DT]\u0022.equals(\u0022DATE\u0022)) {vL[POS]=20;}; if(\u0022[DEST_DT]\u0022.equals(\u0022NUMBER\u0022) && vL[POS]==0) {vL[POS]=255;};", "\n \t", "\n?>", "INS")%>
create table <%=snpRef.getTable("L","ERR_NAME", "W")%>
ERR_TYPE <%=snpRef.getDataType("DEST_VARCHAR", "1", "")%> <%=snpRef.getInfo("DEST_DDL_NULL")%>,
ERR_MESS <%=snpRef.getDataType("DEST_VARCHAR", "250", "")%> <%=snpRef.getInfo("DEST_DDL_NULL")%>,
CHECK_DATE <%=snpRef.getDataType("DEST_DATE", "", "")%> <%=snpRef.getInfo("DEST_DDL_NULL")%>,
<%=snpRef.getColList("", "[COL_NAME]\t varchar2 (<?=vL[POS]?>) " + snpRef.getInfo("DEST_DDL_NULL"), ",\n\t", "", "INS")%>,
ORIGIN <%=snpRef.getDataType("DEST_VARCHAR", "100", "")%> <%=snpRef.getInfo("DEST_DDL_NULL")%>,
CONS_NAME <%=snpRef.getDataType("DEST_VARCHAR", "35", "")%> <%=snpRef.getInfo("DEST_DDL_NULL")%>,
CONS_TYPE <%=snpRef.getDataType("DEST_VARCHAR", "2", "")%> <%=snpRef.getInfo("DEST_DDL_NULL")%>
Do you know whats the problem??
Thanks in advance :)
With regards,
PsmakR

What version of ODI are you using ?
Are you still using Sunopsis ?
Try using ODI 10.1.3.5
Also, follow the solution in post
Issue with Create Target Table in CKM Oracle

CKM Oracle: Max Number of Errors Parameter in CKM

Hi,
I have a question and would require your suggestion.
ODI version : ODI 11G
I am using CKM Oracle as my Check Knowledge Module.
In CKM, we have a option "Maximum Numbers of Errors Allowed" .. to be given as percentage or number.
My requirement is if the total error is more than 10% for any interface , the ODI should send an e-mail and proceed to next interface.
I have e-mail set-up in ODI and tested.
However, when i mention 10% in that field, and if the number exceeds 10% of total count, the INterface fails.
I want to know how ODI is calculaing the error number and if the above mentioned scenario can be implemented.
Pratik.

I have created the package in the same format as you have mentioned.
No, the issue is if i check the Error percentage for an interface, the Interface fails giving the error message:
ODI-1226: Step int_jda_dfuview_level1 fails after 1 attempt(s).
ODI-1239: Flow int_jda_dfuview_level1 fails because the maximum percentage of allowed errors (10 %) is exceeded during the flow check. This flow loads target table DFUVIEW.
My requirement is that Since all these packages are part of Master Package, hence when total number is of error is more than 10% for a particular interface (which is called as a Scenario in my master batch),
the interface should not fail rather it should be like warning, send an e-mail and proceed to next package.
My Package Design:
OdiWebservice ----OK----- Package Called as Scenario ----OK--- Success Email
If Scenario Fails : ---KO --- Failure E-mail --------OK--- Dummy Failure Package
The Dummy package is used so that if there is a failure, the Master Batch should be started from where it failed.

ODI-1228 CKM Hypersonic SQL

Hi Everyone!, I have a problem with this issue, in trying to execute next task:
ODI-1228: Task Error TRG_CUSTOMER (Control) in target HYPERSONIC_SQL connection HSQL_LOCALHOST_20002.
Caused By: java.sql.SQLException: unknown word
at org.hsqldb.jdbc.Util.sqlException(Unknown Source)
at org.hsqldb.jdbc.JDBCPreparedStatement.<init>(Unknown Source)
at org.hsqldb.jdbc.JDBCConnection.prepareStatement(Unknown Source)
at sun.reflect.GeneratedMethodAccessor66.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.odi.core.datasource.dwgobject.support.OnConnectOnDisconnectDataSourceAdapter$OnDisconnectCommandExecutionHandler.invoke(OnConnectOnDisconnectDataSourceAdapter.java:200)
at $Proxy2.prepareStatement(Unknown Source)
at oracle.odi.runtime.agent.execution.sql.SQLCommand.doInitializeStatement(SQLCommand.java:83)
at oracle.odi.runtime.agent.execution.sql.SQLCommand.getStatement(SQLCommand.java:117)
at oracle.odi.runtime.agent.execution.sql.SQLCommand.getStatement(SQLCommand.java:111)
at oracle.odi.runtime.agent.execution.sql.SQLCommand.execute(SQLCommand.java:158)
at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:102)
at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:1)
at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:577)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:468)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2128)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:366)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:292)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:855)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
at java.lang.Thread.run(Thread.java:662)
This is the code we try to execute, seems that the problem is with the " in the midle of the table name, I don't know if there's a way to remove this [ " ] or set it at the begining of the table name:
create table
W$_UK_"I$_TRG_CUSTOMER"
CUST_ID
NUMERIC(10) NULL,
DEAR
VARCHAR(4) NULL,
CUST_NAME
VARCHAR(50) NULL,
ADDRESS
VARCHAR(100) NULL,
CITY_ID
NUMERIC(10) NULL,
PHONE
VARCHAR(50) NULL,
AGE
NUMERIC(3) NULL,
AGE_RANGE
VARCHAR(50) NULL,
SALES_PERS
VARCHAR(50) NULL,
CRE_DATE
DATE NULL,
UPD_DATE
DATE NULL,
UK_NB
numeric(10)
We're using ODI 11.1.1.7, Hypersonic SQL 2.0.0, Windows 32 bits
Hope anyone can help us, Thanks!
p.d.: sorry my english is not very fluent

Hi there..!!
I had same issue at running demo environment,
Some versions of "Hypersonic SQL" is case sensitive..
Im tried to set CKM values as show on ODI Overview ( http://www.oracle.com/technetwork/middleware/data-integrator/overview/odigs-11g-168072.pdf )..
just change "CKM HSQL is selected" to CKM SQL .. and execute..!
it works for me..!
Regards..!!
&Your english is good

New DVR Issues (First Run, Channel Switching, etc.)

I've spent the last 30 minutes trying to find answers through the search with no luck, so sorry if I missed something.
I recently switched to FIOS from RCN cable in New York. I've gone through trying to setup my DVR and am running into issues and was hoping for some answers.
1. I setup two programs to record at 8PM, I was watching another channel at the time and only half paying attention. Around 8:02 I noticed a message had popped up asking if I would like to switch channels to start recording. I was expecting it to force it to switch like my old DVR, but in this case it didn't switch and I missed the first two minutes of one of the shows. I typically leave my DVR on all day and just turn off the TV, this dual show handling will cause issues with that if I forget to turn off the DVR. Is there a setting I can change that will force the DVR to choose one of the recording channels?
2. I setup all my recordings for "First Run" because I only want to see the new episodes. One show I setup was The Daily Show on comedy central, which is shown weeknights at 11pm and repeated 3-4 times throughout the day. My scheduled recordings is showing all these as planned recordings even though only the 11pm show is really "new". Most of the shows I've setup are once a week so they aren't a problem, but this seems like it will quickly fill my DVR. Any fixes?
Thanks for the help.
Solved!
Go to Solution.

I came from RCN about a year ago. Fios is different in several ways, not all of them desirable. Here are several ways to get--and fix--unwanted recordings from a series recording setup.
Some general principles.
Saving changes. When you originally create a series with options, or if you go back to edit the options for an existing series, You MUST save the Series Options changes. Pretty much everywhere else in the user interface, when you change an option, the change takes effect immediately--but not in Series Options. Look at the Series Options window. Look at the far right side. There is a vertical "Save" bar, which you must navigate to and click OK on to actually save your changes. Exiting the Series Options window without having first saved your changes loses all your attempted changes--immediately.
Default Series Options. This is accessed from [Menu]--DVR--Settings--Default Series Options. This will bring up the series options that will automatically be applied to the creation of a NEW series. The options for every previously created series will not be affected by a subsequent modification of the Default Series Options. You should set these options to the way you would like them to be for the majority of series recordings that you are likely to create. Be sure to SAVE your changes. This is what you will get when you select "Create Series Recording" from the Guide. When creating a new series recording where you think that you may want options different from the default, select "Create Series with Options" instead. Series Options can always be changed for any individual series set up later--but not for all series at once.
Non-series recordings. With Fios you have no directly available options for these. With RCN and most other DVRs, you can change the start and end times for individual episodes, including individual episodes that are also in a series. With Fios, your workarounds are to create a series with options for a single program, then delete the series later; change the series options if the program is already in a series, then undo the changes you made to the series options later; or schedule recordings of the preceding and/or following shows as needed.
And now, to the unwanted repeats.
First, make sure your series options for the specific series in question--and not just the series default options--include "First Run Only". If not, fix that and SAVE. Then check you results by viewing the current options using the Series Manager app under the DVR menu.
Second, and most annoying, the Guide can have repeat programs on your channel tagged as "New". It happens. Set the series option "Air Time" to "Selected Time". To make this work correctly, you must have set up the original series recording after selecting the program in the Guide at the exact time of a first run showing (11pm, in your case), and not on a repeat entry in the Guide. Then, even it The Daily Show is tagged as New for repeat showings, these will be ignored.
Third, another channel may air reruns of the program in your series recording, and the first showing of a rerun episode on the other channel may be tagged as "New". These can be ignored in your series if you set the series option "Channel" to "Selected Channel". Related to this, if there is both an SD and HD channel broadcasting you series program, you will record them both if the series option "Duplicates" is set to "Yes". However, when the Channel option is set to "Selected Channel", the Duplicates Option is always effectively "No", regardless of what shows up on the options screen.
As for you missing two minutes, I have sereral instances in which two programs start recording at the same time. To the best of my recollection, whenever the warning message has appeared, ignoring it has not caused a loss of recording time. You might have an older software version. Newest is v.1.8. Look at Menu--Settings--System Info. Or, I might not have noticed the loss of minutes. I regularly see up to a minute of previous programming at the start of a recording, or a few missing seconds at the beginning or end of a recording. There are a lot of possibilities for that, but the DVR clock being incorrect is not one of them. With RCN, the DVR clocks occasionally drifted off by as much as a minute and a half.

Pension issue Mid Month Leaving

Dear All,
As per rule sustem should deduct mid month joining/leaving/absences or transfer scenarios, the Pension/PF Basis will be correspondingly prorated. But our system is not doing this. In RT table i have found 3FC Pension Basis for Er c 01/2010                    0.00           6,500.00.
Employee leaving date is 14.04.2010. system is picking pension amout as 541. Last year it was coming right.
Please suggest.
Ashwani

Dear Jayanti,
We required prorata basis pension in case of left employees and system is not doing this. This is the issue. As per our PF experts Pension amount should come on prorata basis for left employees in case they left mid of month.System is doing prorata basis last year but from this year it is deducting 541. I am giving two RT cases of different years.
RT table for year 2010. DOL 26.04.2010
/111 EPF Basis              01/2010                    0.00           8,750.00
/139 VPF Basis              01/2010                    0.00           8,750.00
/3F1 Ee PF contribution     01/2010                    0.00           1,050.00
/3F3 Er PF contribution     01/2010                    0.00             509.00
/3F5 Ee Mon PF contribution 01/2010                    0.00           1,050.00
/3F6 Ee Ann PF contribution 01/2010                    0.00          12,600.00
/3F9 PF adm chrgs * 1,00,00 01/2010                    0.00              96.25
/3FA PF basis for Ee contri 01/2010                    0.00           8,750.00
/3FB PF Basis for Er Contri 01/2010                    0.00           8,750.00
/3FJ VPF basis for Ee contr 01/2010                    0.00           8,750.00
/3FL PF Basis for Er Contri 01/2010                    0.00           6,500.00
/3F4 Er Pension contributio 01/2010                    0.00             541.00
/3FC Pension Basis for Er c 01/2010                    0.00           6,500.00
/3FB PF Basis for Er Contri 01/2010                    0.00           8,750.00
/3FC Pension Basis for Er c 01/2010                    0.00           6,500.00
/3FJ VPF basis for Ee contr 01/2010                    0.00           8,750.00
/3FL PF Basis for Er Contri 01/2010                    0.00           6,500.00
/3R3 Metro HRA Basis Amount 01/2010                    0.00           8,750.00
1BAS Basic Salary           01/2010                    0.00           8,750.00
RT table for year 2009. DOL 27.10.2009
                                                                                /111 EPF Basis              07/2009                    0.00           9,016.13
/139 VPF Basis              07/2009                    0.00           9,016.13
/3F1 Ee PF contribution     07/2009                    0.00           1,082.00
/3F3 Er PF contribution     07/2009                    0.00             628.00
/3F5 Ee Mon PF contribution 07/2009                    0.00           1,082.00
/3F6 Ee Ann PF contribution 07/2009                    0.00           8,822.00
/3F9 PF adm chrgs * 1,00,00 07/2009                    0.00              99.18
/3FA PF basis for Ee contri 07/2009                    0.00           9,016.00
/3FB PF Basis for Er Contri 07/2009                    0.00           9,016.00
/3FJ VPF basis for Ee contr 07/2009                    0.00           9,016.00
/3FL PF Basis for Er Contri 07/2009                    0.00           5,452.00
/3FB PF Basis for Er Contri 07/2009                    0.00           9,016.00
/3FC Pension Basis for Er c 07/2009                    0.00           5,452.00
/3FJ VPF basis for Ee contr 07/2009                    0.00           9,016.00
/3FL PF Basis for Er Contri 07/2009                    0.00           5,452.00
/3R4 Non-metro HRA Basis Am 07/2009                    0.00           9,016.13
1BAS Basic Salary           07/2009                    0.00           9,016.13
Now please suggest what to do. where is the problem ? If have also checked EXIT_HINCALC0_002 but nothing written in it.
With Regards
Ashwani

Open PO Analysis - BW report issue

Hello Friends
I constructed a query in BW in order to show Open Purchase Orders. We have custom DSO populated with standard
datasource 2lis_02_itm (Purcahse Order Item). In this DSO we mapped the field ELIKZ to the infoobject 0COMP_DEL
(Delivery completed).
We loaded the data from ECC system for all POs and found the following issue for Stock Transport Purchase orders (DocType = UB).
We have a PO with 4 line items. For line items 10 and 20, Goods issued, Goods received and both the flags "Delivery
complete" and "Final delivery" checked. For line items 30 and 40, only delivery indicator note is issued for zero
quantity and Delivery complete flag is checked (Final delivery flag is not checked) in ECC system. For this PO, the
delivery completion indicator is not properly updated in the DSO for line items 30 and 40. The data looks like the
following:
DOC_NUM     DOC_ITEM      DOCTYPE     COMP_DEL
650000001       10     UB        X
650000001       20     UB        X
650000001       30     UB
650000001       40     UB
When we run the Open PO analysis report on BW side this PO is appearing in the report but the same is closed in ECC
system.
Any help is appreciated in this regard.
Thanks and Regards
sampath

Hi Priya and Reddy
   Thanks for your response.
                     Yes the indicator is checked in EKPO table for items 30 and 40 and delta is running regularly for more than 1 year and no issues with other POs. This is happening only for few POs of type Stock Transport (UB).
                    I already checked the changes in ME23N and the Delivery completed indicator was changed and it reflected in EKPO table. Further, i checked the PSA records for this PO and i am getting the records with the Delivery completed flag but when i update from PSA to DSO the delivery completed indicator is not updating properly.
                   In PSA, for item 30 i have the following entries. Record number 42 is capturing the value X for ELIKZ but after that i am getting two more records 43 and 44 with process key 10 and without X for ELIKZ. I think this is causing the problem.
Record No.    Doc.No.                    Item              Processkey         Rocancel     Elikz
    41               6500000001            30                    11                            X           ---
    42               6500000001            30                    11                            ---           X
    43               6500000001            30                    10                            X           ---
    44               6500000001            30                    10                            ---         ---
(Here --- means blank)
Thanks and Regards
sampath

HP LaserJet Enterprise 600 M602 driver issue

Hello,
I've got issue with 600-series printers. We use the latest UPD drivrer ver. 61.175.1.18849 and print from XenApp 6.5. The error occurs every time when users try to print jpg files from XenApp session. It only happens with 600 series printers and UPD.
Also I've tried to assign native 600-series driver ver. 6.3.9600.16384 and it works good. But with that driver system says that it's color printer and it brokes our printing reports. These reports are very important for us. So we can't use printer and that driver as well.
Printer installed on Windows Server 2012 R2. All clients are Windows 7 x64. XenApp Servers are Server 2008R2.
Is it possible to get fixed UPD driver or correct native driver for Server 2012 R2?
Regards,
Anatoly

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at Printers - LaserJet.
Click on New Post.
I hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Windows 7 displays error message when exiting +cursor issue

Two issues here. CS5 Phoshop on Wind 7 64 bit.
Physical processor count: 8
Processor speed: 3073 MHz
Built-in memory: 12279 MB
Free memory: 9577 MB
Memory available to Photoshop: 10934 MB
Memory used by Photoshop: 80 %
Image tile size: 128K
First issue is since the latest automatic Adobe update (why fix what isn't broken?) Every time I now exit Photoshop I get the message "Adobe QT Server has stoped working" and occasionally it happens when I exit bridge. Indesign is also behaving badly. I can no longer start a previous document from file manager without ID crashing out.
The other is the cursors in Clone and erase lose their edge (become invisable) for no reason - well not quite. Noise Ninja crashed Photoshop when I tried to use it. I reinstalled it and all is well. The cursor issue seems to be intermittant but came back (for no reason) after I reinstalled NN. I can't seem to change the cursor, no matter what I do. The problem is now seriously affecting how I work. Almost enough to go back to Win XP which ran CS5 Photoshop flawlessly.
Any help will be gratefully accepted.
Doug

function(){return A.apply(null,[this].concat($A(arguments)))}
doug87510 wrote:
The recent problem is the entire outline of the cursor (including the crosshair in the middle) was missing at any size of cursor. All I had was exactly what I'd get if I used a real spraygun.
Well, that issue is simply a matter of hitting the Caps Lock key. When Caps Lock is on, you'll see the cursor outline, and when it is off you'll see a crosshair. That's a feature, not a bug.
Glad to hear the 11.1 drivers are out. I will download them and try them now myself.
Regarding "Adobe QT" crashing... QT brings to mind QuickTime, though that is Apple, not Adobe. Do you have Apple QuickTime installed?
Regarding memory usage, with 12 GB of installed RAM, you should be able to set Photoshop to use 90% or more in Edit - Preferences - Performance.
-Noel

Issue in Creation of Periodicals for Contracts in CRM7.0

Hello,
I have a requirement to create Contracts in CRM7.0 system.
And I am doing this using the BAPI *BAPI_BUSPROCESSND_CREATEMULTI*
Good part is Contract Order gets created, but onlywith Header Details.
The issues i am facing --
1. I need to know what kind/type of data must be passed to the interface parameters, the F1 Help/Documentation is vague.
2. I am passing data in the INPUT FIELDS structure with the Object ID, Handle Number, Reference GUID and Fieldname,
here what does 'Logical Key' field indicate? What should be passed here.
What does 'REFERENCE KIND' field indicate, i have been passng 'A' for everything (to be frank i dont know whats its significance is!!).
3. With so much, My Order gets created but with less than half details, i.e. the Objects not getting created are - Partner, Product, terms/appointments, Status, LongTexts......
Any help/inputs would be appreciated.
Hope my problem is stated clearly ...
--Regards
Dedeepya

Hi Anu,
i found my solution by debugging with existing data or while creating it in CRMD_ORDER.
Ensure that you are passing a correct entry in INPUT_FIELDS structure.
As i haven't worked on rebates i woudlnt be able to help you, I suggest you debug to arrive at a solution.
You can preset your break-points at :-
1. FM - CRM_ORDER_MAINTAIN
2. CRM_ORDER_MAINTAIN_MULTI_OW -- Debug through the complete FM.
3. CRM_ORDER_PREPARE_MULTI_OW -- The data is set in this function module.
Regards
Dedeepya C

Issue in creation of plant related data at receiving server using BD10

Hi all,
This is regarding Material master creation using B10.I am using MATMAS05 message type for sending data from one system to another.Data is sent and received successfully.When i go in mm03 i can see all the views created successfully accept views related to PLANT.Please guide to resolve the issue.
When i entered into Log-
1)"The field MBEW-BKLAS is defined as a required field; it does not contain an entry".
2)"No material master data exists for material AB_08.04.09(30) in plant 4001".
My segemnt is as follows-
ZMATMAS05                      matmas05
       E1MARAM                        Master material general data (MARA)
           Z1KLART                        KLART----
My extention
           E1MARA1                        Additional Fields for E1MARAM
           E1MAKTM                        Master material short texts (MAKT)
           E1MARCM                        Master material C segment (MARC)
               Z1AUSPM                        E1AUSPMDistribution of Classification:----
My extention
               E1MARC1                        Additional Fields for E1MARCM
               E1MARDM                        Master material warehouse/batch segment (MARD)
               E1MFHMM                        Master material production resource/tool (MFHM)
               E1MPGDM                        Master material product group
               E1MPOPM                        Master material forecast parameter
               E1MPRWM                        Master material forecast value
               E1MVEGM                        Master material total consumption
               E1MVEUM                        Master material unplanned consumption
               E1MKALM                        Master material production version
           E1MARMM                        Master material units of measure (MARM)
           E1MBEWM                        Master material material valuation (MBEW)
           E1MLGNM                        Master material material data per warehouse number (MLGN)
           E1MVKEM                        Master material sales data (MVKE)
           E1MLANM                        Master material tax classification (MLAN)
           E1MTXHM                        Master material long text header
           E1CUCFG                        CU: Configuration data
       E1UPSLINK                      Reference from Object to Superior UPS
Thanks.
Edited by: sanu debu on Apr 27, 2009 7:10 PM

CREATE CONTROLFILE SET DATABASE "NEWDB" NORESETLOGS ARCHIVELOGAlso when you are setting a new database, the option should be RESETLOGS and not NORESETLOGS.
'D:\APP\ADMINISTRATOR\ORADATA\NEWDB\ONLINELOG\O1_MF_2_7FK0XKB8_.LOG
D:\APP\ADMINISTRATOR\ORADATA\NEWDB\DATAFILE\O1_MF_SYSTEM_7FK0SKN0_.DBFWhy underscore(_) at the end of the datafile name. Any specific reason ?

CKM Issues

Similar Messages

Maybe you are looking for