CKMLGRIR 009

Dear Friends,
Am getting an error message " No Data selected ,check the selection parameter, Message # CKMLGRIR 009 " while am trying to clear my GR/IR account with Purchase order number.
I have checked the GR/IR GL open items and I found the open items for particular PO then I have chossen the same PO 3 in the selection parameter in the MR11.
Could someone throw light on this and guide me how to solve this problem.
Thanks,
Ram

Hi Gaito,
Thanks for your reply.
I have one PO line,with seven GR lines with tolal 615,239.93 USD, three IR lines with 583,839.6 USD.
I have cheked the balance of GR/IR account with MBS5 and I found that list contains no data.
Could guide mr further what to do.
Thanks ,
Ram

Similar Messages

Applications not responding apparently after Security Update 2007-009

Mail, iTunes, Skype, MSN Messenger, MainMenu, Emule, Safari and god know what else aren't responding after Security Update 2007-009.
Hi,
I recently purchased a new phone that does not work with macs, so I bought an application from Feisar to make it work. The application isn't freeware, so I think it is very unlikely that it bogused my system. Anyway, I installed the software, but only afterwards noticed it didn't work for my phone model with the USb interface, only through bluetooth, which I don't have. Moreover, and, in my opinion, more importantly, I also downloaded and installed security update 2007-009. After the update, I mandatorily restarted OS X and instantly noticed Mail, iTunes, Safari, Skype and Messenger not working. I click on them on the dock, they bounce (usually once, but it has occured to be more) and nothing happens. I don't get the little arrow below the icon. I see the applications in the applications folder, so they are not missing. I searched and searched on the internet and, apparently it is, to say the least, herculeanly complicated to downgrade from a software update. I tried to repair permissions and it didn't work. I tried the apple hardware test and everything came out perfect. I restarted many times and the same keeps happening.
So I wasted half my day yesterday trying to fix this, looking into forums and trying to talk to people about it and there it absolutely no answer. Yesterday I installed the programs necessary to sync my phone in my wife's macbook and nothing bad happened. So I'm guessing it isn't about the phone plugins I installed. I've tried to download combo updates but they crash as soon as I try to install them - I even tried to install a 10.4.10 update.
This is the error message I get:
Command: Installer
Path: /Applications/Utilities/Installer.app/Contents/MacOS/Installer
Parent: WindowServer [114]
Version: 2.1.9 (104)
Build Version: 36
Project Name: Installer
Source Version: 1040000
PID: 603
Thread: Unknown
Link (dyld) error:
Symbol not found: _WebCoreUnicodeDirectionFunction
Referenced from: /System/Library/Frameworks/WebKit.framework/WebKit
Expected in: /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore.frame work/Versions/A/WebCore
/System/Library/Frameworks/WebKit.framework/WebKit
I put part of in on google to check if there was anybody discussing anything related and someone suggested - bizarrely enough - updating adobe reader. I did it just in case and, of course, it didn't work. I repaired permissions a million times already, I rebooted in safe mode, I scaned the computer with apple jack (which reapetedly said that I had a "fan failure!"), I verified the disk with diskutility - which showed nothing. I tried downloading an anti-virus (ClamXav), but I couldn't open it also, I trashed my prefs, I deleted all internet plugins, but still.... nothing.
The most likely line to follow here is the "fan failure" message in apple jack. I looked inside my g5 and all fans except for the one close to the Hard Drives aren't spining. I'm not sure this means they aren't functional or whether the temperature isn't high enough for it to be turned on. Temperature must be around 26-28 degrees Celsius today. There is nothing on the internet about that fan failure that's close enough to my case.
I'm about to quit and take it to the very expensive - yet reliable - authorized tech support apple has in Rio. Any ideas, anyone?

Maybe it is a security update thing! I have had similar troubles with my CS2 and other simple apps like TextEdit not opening, just doing that single bounce... I have tried EVERYTHING and now, after reinstalling my entire system, have lost access to my own user profile.
I'm assuming you have tried starting up with your original system install disk in the computer, while you turn it on, hold the option key, it will allow you to run another hardware check, as well as to do an archive install if it comes down to that.
good luck, please let me know if you find out something else that might be causing the problems... i've noticed that alot of mac threads have similar probs listed.

Error: No depreciation posting required in period 009 (current period)

Hi,
I am getting error " No depreciation posting required in period 009" and 009 is my current period.
The description of the error says " Do depreciation is posted, since according to the posting cycle no postings are required in this period". In fact this is the first time i am running depreciation. I want to post the depreciation for 1st period. More over i could not able to see the planned values in asset explorer also.
Whenever i am entering this asset in the asset explorer it is giving the above error. But while i run the depreciation its not giving any error. When i check in spool to view the depreciation, its giving msg as "List contains no data" check error log.
Could anyone help me in resolving this error. what could be the reason for this error.
Thanks
Sabera

Hi,
I checked in TABA table, its showing that till 9 the period depreciation has been posted. But i have not posted the depreciation. If it is posted, then it has to show in the planned values as posted, but its showing as "No depreciation" and its not even showing the depreciation for other periods. Could you able to clear this query? I wonder why it is giving this kind of error.
Regards
Sabera

While creating miro error message posting date 009 2011is not open

sir
while creating miro the error message is not open open for the posting date 009 2011

Hi,
The date format you have mentioned 009 2011 won't be supported by SAP system. Please enter it in correct format. If the format is OK an not working means MM posting periods are not open for this month this error will come.In MMPV give company code and specify the period to close and save.Again go to same transaction open the period for this month. I hope this will resolve your issue. Thanking you.
Edited by: Padmasri Garapati on Sep 16, 2011 6:58 AM

Mail 2.0.5 CRASHES ON OPEN after Security Update 2005-009(Tiger Client)

I'm trying to figure out how to fix this.
I rebooted into a techtool pro e-drive and repaired permissions (as well as some other repairs to the drive, etc), but it still is crashing.
I created a new user and opened mail just fine there.
So... it is something in my account. Not sure exactly what to do next?

I'm having the same exact problem. (See Mail 2.0.5 crashes when I get new mail). I deleted my preferences & my junk mail settings, to no avail.
A remarkable number of other people are posting with similar problems, just in the past week or so alone, and as far as I can tell, no one has figured it out. There is definitely a bug here. I have a hunch that it may be related to a recent software update. I'm going to post this to the other threads in hopes of garnering some attention from Apple.
For posterity's sake, I am connecting to a Gmail account, a POP account, and a .Mac account.
See also:
Mail keeps crashing
mail 2.0.5 CRASHES ON OPEN after Security Update 2005-009(Tiger Client)
Mail crashes immediately after opening--why?
Mail Crashes CONSTANTLY!
Mail quits when launching
Mail crashes at open
Mail crashes when downloading new mail.

Posting date/period 31.12.2014/009 is earlier than existing date/period 17.01.2015/010

Hi Experts
While posting of invoice document (T.Code MIRO) I got the below error message;
Posting date/period 31.12.2014/009 is earlier than existing date/period 17.01.2015/010
Message no. FI_E050
Diagnosis
Commitment postings to Funds Management require that the current transaction's posting date is earlier than the posting date of the original or change account assignment line item of the document.
I have checked several threads still i am not able to get answer -Invoice posting Error
Regards
Sp

Suraj,
please check following note
564439 - FM update date is earlier than an existing postings
Regards

Execution timed out error when running opcagt command on linux server with agent 11.12.009 installed

Hi,
Can anyone help me in the below issue.
we have a Linux server with agent version 11.12.009 installed on it. when I try running opcragt command on it through are management server it gives the output that all agent components are running.
but when I check the agent status or version through opcagt command on it it gives below error:
ERROR: (depl-86) Unable to execute command 'opcagt' on node
(depl-176) Message returned from host
(xpl-117) Timeout occurred while waiting for data.
Below are the error lines that I got from system.txt file of the server:
0: ERR: Fri Dec 19 09:09:38 2014: ovconfd (3708/140429034952480): (conf-180) Could not create messenger for configuration server 'ovconfd' and register its methods with the messenger object.
1: ERR: Fri Dec 19 09:09:38 2014: ovconfd (3708/140429034952480): (xpl-89) write(11)[012C5430] failed.
2: ERR: Fri Dec 19 09:09:38 2014: ovconfd (3708/140429034952480): (RTL-28) No space left on device
Could anyone please let me know what can be the issue in this.
Thanks,
Akansha

ORA-00600: internal error code, arguments: [kzxcInitLoadLocal-7], [942],
[ORA-00942: table or view does not exist
ORA-01403: no data found
ORA-06512: at "SYS.DBMS_NETWORK_ACL_ADMIN", line 252
ORA-06512: at line 36
ORA-01403: no data foundWhat does this query return?
SQL> SELECT HOST, ACL
FROM DBA_NETWORK_ACLS;Please see (Redefining a Network Access Control List Fails with ORA-1403 [ID 854083.1]).
Thanks,
Hussein

Mac OS won't boot after 2007-009 1.1 update

Hi all
Fairly major problem here. Mac OS X won't boot after the 2007-009 1.1 security update.
What I am left with is the mac boot screen, and not a lot happening. No rotating loading animation.
Any help would be really appreciated.
Thanks

I have been booting up for...2.45 hours now
Good grief!
Here are a few hints about what you should have done:
There are no guarantees, but following this procedure when installing updates and upgrades on your Mac will go a long way towards avoiding unpleasant after effects and ‘post-update stress disorder’.
It is also worth noting that it is an extreme rarity for updates to cause upsets to your system, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.9 to 10.4.10. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them 10.4.10. compliant. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
If you are updating Safari (or just have):
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed 10.4.11 and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari. Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 uses Safari 3.0.4 which is not a beta. If Safari 3.0.4 on 10.4.11 is not the fastest browser you have ever used, then something is wrong!
Moreover, trying to revert to Safari 2 when running 10.4.11 can have repercussions, as Safari 3.0.4 uses a completely different webkit on which other applications like iChat, Mail and Dashboard Widgets etc also rely.
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on. Two such add-on that have been frequently mentioned here for causing such problems are Piclens and Pithhelmet. If you have them, trash them.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692

Security Update 2005-009 and Illustrator CS1

Today I updated with Security Update 2005-009. Tonight Illustrator CS1 is behaving very wacky. Whenever I use the Undo command everything on my art board moves around. I've deleted my Illustrator preferences, but it still happens.
Has anyone else noticed this and is there a workaround. It will be a few more weeks until I have CS2.
Thank You

Welcome to Apple Discussions!
Security updates may have issues when permissions are not updated before and after an install of them. Repair permissions via Applications -> Utilities -> Disk Utility.

Automatic java update 2005 009, how to uninstall it ?

Hello all,
the last java security update 2005 009 is installed (automatic update)on my server. But I have a problem with an application. How can I uninstall it ?
Thanks

Hello all,
the last java security update 2005 009 is installed (automatic update)on my server. But I have a problem with an application. How can I uninstall it ?
Thanks

Can't Install Security Update 2007-009 With Software Update

I tried to install Security Update 2007-009 on a 10.5.1 G4 system, but the installation fails with an "unknown error". Here are the details:
1) Software Update downloads the file and ask to Restart
2) Get to the blue screen
3) See these messages "Preparing target volume" and "Configuring installation"
4) Get this error message:
The update "Security Update 2007-009" can't be installed.
The installer encountered an unknown error that failed the install. Contact the software manufacturer for assistance.
5) Restart
I then deleted the "Security Update 2007-009" folder from Library->Updates and tried the update again, but got the same error.
Any idea what's wrong and how to fix it?
Thanks.

I installed Security Update 2007-009 via Software Update and received the following error:
"Security Update 2007-009 can't be installed. The installer could not validate the contents of the SecUpd2007-009 package."
I ran Disk Utility (twice) to ensure that the permissions were in order and received the following report on both occasions:
Repairing permissions for “Macintosh HD”
Warning: SUID file "usr/libexec/load_hdi" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner " has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig" has been modified and will not be repaired.
Warning: SUID file "usr/libexec/authopen" has been modified and will not be repaired.
Warning: SUID file "System/Library/CoreServices/Finder.app/Contents/Resources/OwnerGroupTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
Permissions repair complete
Regarless, I downloaded the update directly from Apple Support located here:
http://www.apple.com/support/downloads/securityupdate2007009111051.html
And 2007-009 installation complete without a hitch. I have no idea what is going on with the permissions (any recommendations) but I have not found any other problems since this update was installed.
I hope this helps.

Trouble after installing Security Update 2005-009

After installing Security Update 2005-009 I experienced some minor problems with Dashboard where some widgets no longer work and a more annoying problem with CodeTek VirtualDesktop Pro, which exits directly after launching the app (the desktop pager and menu appear and then the app quits). Tried repair of permissions, deleting of VirtualDesktop Pro's prefs, reinstalling the app, etc. - so far nothing helped. CodeTek does not answer my support requests. Has anyone experienced similar problems?
Power Mac G5 1.6 Mac OS X (10.4.3)

I would completely uninstall all 3rd party widgets. Restart. Then see if the problem goes away.
It's likely to be an issue with one of your widgets. And possibly a combination of specific one with a specific another.
- Shilo

Security Update 2007-009 will not install

I ran the Software Update utility and found Security Update 2007-009. When I tried to install it, it gave me the following error message:
The update "Security Update 2007-009" can't be saved.
You do not have appropriate access privileges.
The Installer package has been moved to the Trash.
To try again, open the package from the Finder.
I am logged in as an Administrator level user, and I tried to re-run the updater, but got the same result. This also happened on my MacBook.
Anyone else having this error? Any resolutions?

Wes Stone wrote:
I ran the Software Update utility and found Security Update 2007-009. When I tried to install it, it gave me the following error message:
The update "Security Update 2007-009" can't be saved.
You do not have appropriate access privileges.
The Installer package has been moved to the Trash.
To try again, open the package from the Finder.
I am logged in as an Administrator level user, and I tried to re-run the updater, but got the same result. This also happened on my MacBook.
Anyone else having this error? Any resolutions?
Which version? 1.0 or 1.1??
It may already be installed.
Go to Software Updates in SysPrefs and check the list of installed updates.

OS X cannot verify Security Update 2007-009, refuses to install

I keep trying to install the latest Security Update. It tells me to restart, so I do. The computer restarts and it begins to install, then I get a message that reads:
"The update 'Security Update 2007-009' can't be installed. The installer could not validate the contents of the SecUpt2007-009 package. Contact the software manufacturer for assistance."
This has happened about 5 times now. Any ideas?

+The computer restarts and it begins to install+
The restart happens after the install is complete, not before ... it sounds like you might have a corrupt disc image so I'd just download a fresh copy from here (link below) then mount the .dmg file, then double-click on the installer package.
http://wsidecar.apple.com/cgi-bin/nph-reg3rdpty2.pl/product=16527&cat=57&platfor m=osx&method=sa/SecUpd2007-009.dmg

Security Update 2007-009 - Now no sound??

I just installed the freshly released Security Update 2007-009 through software update. I now have no sound at all.
System Preferences informs me that I have no Ouput or Input devices attached. System Profiler, however, tells me I do. I hear the chimes upon startup - so I know this isn't a hardware issue.
Anyone else?? I'm NOT happy!
15" Powerbook G4, 1.5GHz - last revision before the larger resolution screens were released. Running 10.5.1
Help!

chipchipchip,
Welcome to Apple Discussions!
I encourage you to start your own thread. We'll try to isolate your problem there. Mention what you have done, which applications you are having trouble with and if you have tried playing through the audio out port. Here's where to start:
http://discussions.apple.com/forum.jspa?forumID=1219&start=0

CKMLGRIR 009

Similar Messages

Maybe you are looking for