CL_DD_DOCUMENT delete lines or the whole input

Hi all
I m testing with the class CL_DD_DOCUMENT , report DD_ADD_TEXT how could i delete some lines after output, means Refresh of the report .
method free is not inside ....
thanks for help

how could i delete some lines after output
After output I believe you can't.
During document creation you can however use initialize_document to set document in initial state.
Regards
Marcin

Similar Messages

While typing in an email, I can not delete or backspace a single letter. When I delete one letter, the whole line disappear.

While typing in an email, I can not delete or backspace a single letter. When I delete one letter, the whole line disappear. I am using Window 7 and latest Firefox.
== This happened ==
Every time Firefox opened
== Using Firefox on my new machine with Window 7.

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

Deleting lines from the panel

hi everybody,
I am having a problem, plz help me.
I have a link(line) drawn using graphics.drawLine() between two labels, now i want to select that link and delete it.
plz send ur solutions ASAP as iam in a roadblock.
Thanks in advance.

dusanmil wrote:
Thanks a lot for the reply!
Is there something more on that on Verizon website? Is there a discount if I want to terminate the whole contract? I am not satisfied at all...
So you want a BETTER deal the more you cancel? Don't think so.
From the Verizon website:
" If you cancel a line of Service, or if we cancel it for good cause, during its contract term, you'll have to pay an Early Termination Fee. If your contract term results from your purchase of an Advanced Device after November 14, 2009, your Early Termination Fee will be $350 minus $10 for each full month of your contract term that you complete. (For a complete list of Advanced Devices, check verizonwireless.com/advanceddevices.) Otherwise, your Early Termination Fee will be $175 minus $5 for each full month of your contract term that you complete. Cancellations will become effective on the last day of that month's billing cycle, and you are responsible for all charges incurred until then. Also, if you bought your wireless device from an authorized agent or third–party vendor, you should check whether they charge a separate termination fee."

SOAP sync to RFC - Multiple lines in the RFC 'input'

Hello everyone!
I need a little 'insight help'/opinion.
I had a cenario that was working just fine, SOAP Async to iDoc. In the cenario I received 1:n lines and send it to the iDoc. No problem at all.
Now, the analyst asked us to change this cenario to: SOAP Sync to RFC (I opposed that but.. it's their decision..)
So, I created a RFC with NO IMPORTING AND EXPORTING and 2 TABLES. One table to receive 1:n lines as inputs of the data, and other table to give 1:n line as response of the process of that line.(the RFC is remote, so can be used by PI)
When I test this RFC in R3 using transaction SE37, I am able to enter 1:n line in the input table, and get the 1:n line in the response table. And also, the data is inserted in my table. Perfect.
When I import and use this RFC in PI, everything seems to be fine during mapping procedures and such, but when I execute the SOAP call, I get an mapping error. I was able to see that:
1 - The Response from the RFC using PI is 'blank'. I mean, the mapping from the response of the RFC to my SOAP is 'null', that's why I´m getting the error mapping.
2 - Tha data WAS NOT inserted into the table using PI. This worries me more.
So, my question is, does PI understand the use of 2 tables (one as 'input' and other as 'output') from the RFC? - the RFC has no importing and exporting, only tables, as I've mentioned.
Also, is this what I am trying to achieve here, possible? I mean, can I expect to use a RFC with multiple line as 'input' or PI only accepts 'parameters' as input?
Thanks for the insight help!
Ricardo Sancio Lóra
Brazil

but when I map anything from the response to my output, I get the mapping error, but if I map something constant it
worked
Did you test the mapping in IR using the Test tab of Interface/ Message mapping? If it is working for Constant and not for runtime (or other) values then it means that the mapping logic is not proper.
But did you see when I say that the item was NOT inserted into the table in R3?
Now the last check-point in XI.....is your RFC channel showing proper payload in RWB --> Component Monitoring --> Adapter Engine --> CC Monitoring?
Regards,
Abhishek.

Deleting lines from the family plan

Hi,
I have a family plan on my name with 5 lines on it. One of the phones is IPhone and the other ones are simple call&text phones.
If I want to get rid of one of the lines, what are fees for that? I cant find it online anywhere. When I visited store the Verizon stuff were very obscure in information about canceling plans and lines, so I did not get precise info.
Thanks!

dusanmil wrote:
Thanks a lot for the reply!
Is there something more on that on Verizon website? Is there a discount if I want to terminate the whole contract? I am not satisfied at all...
So you want a BETTER deal the more you cancel? Don't think so.
From the Verizon website:
" If you cancel a line of Service, or if we cancel it for good cause, during its contract term, you'll have to pay an Early Termination Fee. If your contract term results from your purchase of an Advanced Device after November 14, 2009, your Early Termination Fee will be $350 minus $10 for each full month of your contract term that you complete. (For a complete list of Advanced Devices, check verizonwireless.com/advanceddevices.) Otherwise, your Early Termination Fee will be $175 minus $5 for each full month of your contract term that you complete. Cancellations will become effective on the last day of that month's billing cycle, and you are responsible for all charges incurred until then. Also, if you bought your wireless device from an authorized agent or third–party vendor, you should check whether they charge a separate termination fee."

I can no longer delete lines on the get info screen

I'm trying to delete the artist on the get info screen. Until a few days ago, I was able to do so. Now, when I delete the artist, the get info screen appears as if the line has been deleted. However, when I click "OK" then close the screen, it hasn't been deleted. When I reopen the screen, that info is still there. I'm not doing anything differently that I did before. Is this a software issue in the latest version of iTunes?

Try going to settings> general> usage> storage> manage storage> look for the app and delete it from there.

I deleted my profile (the whole thing!)--can't access Profile Mgr. It is not missing or there to be recovered. Uninstall/reinstall nor terminal commands help.

I deleted my profile. I've tried online things such as a)restarting computer b)deleting and reinstalling Firefox c)entering in command at Terminal : /Applications/Firefox.app/Contents/MacOS/firefox-bin -profilemanager and even dropping off "- bin" as also suggested. There is not profile and no profile manager. I got into this mess as Firefox had continued to open up window after window and locking up so I could not even get to Preferences without windows burying it and computer locking. After inadvertently deleting my whole profile, I now install Firefox and it doesn't open saying that Firefox is currently open.
These were the links I checked out among a few others that said the same thing:
http://kb.mozillazine.org/Profile_Manager#Mac_OS_X
http://support.mozilla.org/en-US/kb/Basic%20Troubleshooting#w_7-reinstall-firefox

Can you open [http://osxdaily.com/2010/08/15/mac-task-manager/ Activity Monitor] and look any firefox processes or plugin-manager processes and force quit them all? You said Firefox doesn't open because there's a message saying that Firefox is currently open.
The main reason for that would be if a firefox process has been stuck in memory this entire time. Although I don't know how a running firefox process would survive a computer restart. So I'm stumped there. The parent.lock file is another file responsible for the "Firefox is currently open" message, you could try searching for it & erasing that as well.
The very last thing we could try is installing Firefox Portable. In most crazy cases like this, that gets Firefox up and running.
But it's stuck at Firefox version 4.0.1 which is super old.
<br> Link: http://www.macupdate.com/app/mac/20395/portable-firefox
But I think you can use the update feature with Firefox 4.0.1 to upgrade to Firefox 12 within the portable application. Going to '''Help > About Firefox''' should auto check for a update and download it to Firefox Portable.

My mac has small gray lines under the screen.

They're only very visible under certain colors, especially grays and on the sign-in screen. I took a screenshot and they did not appear in the photo, so I took a photo with my phone so you can see what it looks like. The part I took a photo of is the worst (aka the most visible) part, but it stretches in a line across the whole screen. I only just noticed the line, but it's only noticeable with certain colors over it, so I'm not sure how long it's been there. I got my computer in December 2009, it's a 15 inch MacBook Pro.
Any idea what may be causing this and what I should do about it? It doesn't really bother me right now, but I'm worried it might be indicative of a bigger problem!

If you are in the U.S. http://www.dttservice.com/ has often been cheaper than Apple.

Lines across the screen

I have noticed for the first time today (after I have been working on my iMac for a long time) that there are horizontal lines across the whole screen from the top to the bottom. First I thought they would only be on the picture of my desktop background, but then I opened iPhoto and saw the lines on every picture I opened. So those lines are there on the screen and and not only on the displayed image. Really annoying!!!
Unfortunately my iMac is not under guarantee anymore...

I have this too! I just bought this iMac a few months back. These screen are having a lot of troubles from what I am reading. My horizontal lines are not that bad, but you can notice them.
I might sell these computer off quick as apparently the quality of these screens is a nightmare.

Delete last line of a textfile without putting the whole file in memory

Hello!
I want to delete the last line of a text file without loading the whole text file into thememory. My problem is as follows:
A algorithm generates output that has to be written into a text file. This happens periodically - the output goes straight into a xml file. The xml file looks like this:
<test>
<step>
<time>2006-06-19 10:55:20</time>
<result>12321</result>
</step>
<step>
<time>2006-06-19 10:58:20</time>
<result>41515</result>
</step>
</test>
The XML file must be valid, so I have to delete the last line ("</test>") before I add a new <step>-section.
Many thanks in advance
Kind regards,
buliwyf

For processing in a separate tool which understands XML, then using a DTD to declare an external entity is often better - you wrap the entity in the document root element, so you can just append to the end of the file the entity references and not bother about inserting before the closing tag.
File other app loads:
<?xml version="1.0"?>
<!DOCTYPE test [ <!ENTITY content SYSTEM "content.xmlfragment"> ]>
<test>&content;</test>File content.xmlfragment which can be simple appended to:
<step time="2006-06-19 10:55:20">12321</step>
<step time="2007-04-09 10:55:20">12321</step>
<step time="2008-09-26 00:03:20">12321</step>If you can't use XML to solve the problem, then you can scan backwards in the file (using random access file or file buffer) until you find a '<' character which is followed by an '/' character. You can't have CDATA after the closing tag of the document element, and comments and processing instructions have different characters following the '<'.

TS2755 When I click on a IPhone number in contacts to send a message. It keeps trying to send the message to the land line. I deleted the whole contact and re-entered it. But, still wants to send to the land line instead of the IPhone.

When I try to send messages to another IPhone.
I go to contacts.
Touch IPhone number.
Type message.
Hit send.
Comes back to me.
"Can not send messages to land line"
Well I did not touch the land line number - I touched the IPhone number.
I have deleted the whole contact, and re-entered it.
I have turned the IPhone off and on.
Still I get this message on only two of my contacts.
HELP

I can't delete my question, so I'll just say that you press on the type of number written in the box to the left of the box you typye the number into. Dumb or what?

AppleScript to delete the whole line if ..

Im using the following code to find and replace with "target word" but I would like to DELETE the whole line instead of replacing the actual word.
so it would be
if the line contains www.network -> Delete the whole line.
Thanks in advance!
set theTargetWords to {"www.network"}
tell application "Pages" to activate
tell application "System Events" to tell process "Pages"
-- Open the "Find & Replace" window:
keystroke "f" using command down
          repeat until exists window "Find & Replace"
          end repeat
          tell tab group 1 of window "Find & Replace"
-- Adjust the settings:
click radio button 2 -- Advanced
                    if value of checkbox 2 is 1 then click checkbox 2 -- Don't match case
                    if value of checkbox 3 is 1 then click checkbox 3 -- Whole words
                    if value of checkbox 1 is 0 then click checkbox 1 -- Search previous text (loop)
click pop up button 1 -- find in
click menu item 1 of menu 1 of pop up button 1 -- Entire document
click pop up button 2 -- replace style
click menu item 1 of menu 1 of pop up button 2 -- Any
-- Delete every target word:
                    set value of text area 1 of scroll area 2 to ""
                    repeat with thisWord in theTargetWords
                              set value of text area 1 of scroll area 1 to thisWord -- the target word
                              click button "Replace All"
                    end repeat
          end tell
end tell

if you want to script an application, read and use the application scripting dictionary. using System Events to script the GUI is something you should only do as a last resort. It creates clunky, slow, overly complex, and breakable scripts.
try this to start:
tell application "Pages"
          delete (every paragraph of body text of document 1 whose contents contains "some key phrase")
end tell

Xcode - delete the whole line shortcut missing

Hi,
Is there any way to have a shortcut to delete the line? you know, like D from Vi, or CMD+D from Eclipse, o CTRL+D from JEdit, or ... you got it.
please tell me I'm blind and there is a shortcut for that.
just for the record, there is a shortcut option to SELECT LINE, so why not one for DELETE LINE ?
please help,
Thanks,

Hi Grimmac
Many of the applications that Apple themselves make include a sub-set of commands from the emacs editor. Xcode is no exception to this. One of the useful commands from emacs is control-K (or ^K). The first press deletes from the cursor to the end of the line, the second press deletes the carriage return and brings up the next line. Subsequent presses repeat this sequence of events.
Other useful commands are ^A and ^E to move to the start/end of a line, so to delete a complete line from the beginning you can use ^A^K^K.
What makes these commands really worth knowing is that you can use them in Safari to edit URLs, or in Terminal to edit Unix commands, and in many other Apple made applications.
If you do a Google search for "emacs" then you can quickly find the full list of commands. Xcode only supports a few of them, mainly the control + single key ones.
You can also make your own personal keyboard shortcuts from the Xcode Preferences menu option.
Bob

On the input : error message if there is no such id in the database to edit? and out put comments messed up the whole

The first page (CoGetEditForm.cfm lets you input the co id
then it get to the next page for you to edit (CoEditForm.cfm). then
it lets take action and UPDATEs (CoEditAction.cfm) finally, it goes
to the colist.cfm to query results and outputs it to html format.
<td>#comm#</td>
Question is that:
1. where and what do I do to have an error message if there
is no such id in the database to edit?
2. the out put comments messed up the whole query results
when I added it to the html out put results. What can I do to clean
this up and where do I put the code?

<html>
<head>
<title>Main Title</title>
<link rel="stylesheet" href="styles.css">
</head>
<body>
<h1>Edit a Co based on co_ID</h1>
<table>
<cfform action="CO_EditForm.cfm" method="POST">
<tr>
<td>Co_ID</td>
<td>
<cfinput type="Text"
name="Co_ID"
message="Please enter the Co_ID"
validate="integer"
required="Yes"
size="22"
maxlength="20">
</td>
</tr>
<tr>
<td> </td>
<td>
<input type="submit" value="GetCo">
</td>
</tr>
</cfform>
</table>
</body>
</html>

<cfquery name="GetCo"
datasource="#Request.MainDSN#">
SELECT
COName,
ADD,
City,
st,
zip,
comm
FROM
CO
WHERE
Co_ID = #Val(Co_ID)#
</cfquery>
<html>
<head>
<title>Main Title</title>
<link rel="stylesheet" href="styles.css">
</head>
<body>
<h1>Edit a CO</h1>
<table>
<cfform action="COEditAction.cfm" method="POST">
<cfoutput>
<input type="hidden" name="COID" value="#Val(COID)#">
</cfoutput>
<tr>
<td>CO Name</td>
<td>
<cfinput type="Text"
name="COName"
value="#GetCO.COName#"
message="Please enter a name for this CO."
required="Yes"
size="40"
maxlength="40">
</td>
</tr>
<tr>
<td>ADD</td>
<td>
<cfinput type="Text"
name="ADD"
value="#GetCO.ADD#"
message="Please enter this new CO's ADD."
required="Yes"
size="32"
maxlength="30">
</td>
</tr>
<tr>
<td>City</td>
<td>
<cfinput type="Text"
name="City"
value="#GetCO.City#"
message="Please enter a city."
required="Yes"
size="22"
maxlength="20">
</td>
</tr>
<tr>
<td>st</td>
<td>
<cfinput type="Text"
name="st"
value="#GetCO.st#"
message="Please enter a st."
required="Yes"
size="3"
maxlength="2">
</td>
</tr>
<tr>
<td>ZIP Code</td>
<td>
<cfinput type="Text"
name="zip"
value="#GetCO.zip#"
message="Please enter a valid ZIP Code."
validate="zip"
required="Yes"
size="11"
maxlength="10">
</td>
</tr>
<tr>
<td>comm</td>
<td>
<textarea cols="40" rows="5"
name="comm"><cfoutput>#GetCO.comm#</cfoutput></textarea>
</td>
</tr>
<tr>
<td> </td>
<td>
<input type="submit" value="Update Database">
</td>
</tr>
</cfform>
</table>
</body>
</html>
<cfquery name="UpdateCO"
datasource="#Request.MainDSN#">
UPDATE CO
SET
COName = '#Trim(Form.COName)#',
ADD = '#Trim(Form.ADD)#',
City = '#Trim(Form.City)#',
st = '#Trim(Form.st)#',
zip = '#Trim(Form.zip)#',
comm =
<cfif Len(Trim(Form.comm)) GT 0>
'#Trim(Form.comm)#'
<cfelse>
NULL
</cfif>
WHERE
COID = #Val(Form.COID)#
</cfquery>
<cflocation url="COList.cfm">
<cfquery name="GetCo"
datasource="#Request.MainDSN#">
SELECT
coID,
coName,
ADD,
City,
st,
zip,
comm
FROM
co
ORDER BY
coName ASC
</cfquery>
<html>
<head>
<title>title getco</title>
<link rel="stylesheet" href="styles.css">
</head>
<body>
<h1>y List</h1>
<table>
<tr>
<td><b>ID</b></td>
<td><b>Name</b></td>
<td><b>ADD</b></td>
<td><b>City</b></td>
<td><b>st</b></td>
<td><b>ZIP Code</b></td>
<td><b>comm</b></td>
<td> </td>
</tr>
<cfoutput query="GetCompanies">
<tr bgcolor="<cfif currentrow mod
2>GHOSTWHITE<cfelse>WHITE</cfif>">
<td>#coID#</td>
<td>#coName#</td>
<td>#ADD#</td>
<td>#City#</td>
<td>#st#</td>
<td>#zip#</td>
<td>#comm#</td>
<td>
<a
href="EmployeeList.cfm?coID=#coID#">Employees</a>
<a href="coAddForm.cfm">Add</a>
<a href="coEditForm.cfm?coID=#coID#">Edit</a>
<a
href="coDeleteForm.cfm?coID=#coID#">Delete</a>
</td>
</tr>
</cfoutput>
</table>
</body>
</html>

After your SQL SELECT on CO_EditForm.cfm, you need a
<CFIF> that checks to see if any records were retrieved. See
below.

Input file should be deleted only after the output file is successful.

Hi Experts,
Could you pleas solve the below issue.
In a file to file scenario, the input file will be picked from a directory location and after processing output file will be placed in the output directory location specified in the receiver communication channel.
In the sender communication channel for the scenario mentioned above, if the processing mode is given as delete, the input file will be delete as soon as the file was successfully read by the adapter, but this will not ensure that the file processing is complete and the output file is being created.
If we have a scenario in such as way that the input file should be deleted from the input folder only if the complete process is successful and the output is generated. how can we achieve this functionality?.
And one more thing if we got the successful output the output file should be placed in one folder. and the if the output file is having errors it should be placed in other folder.

Hi,
In Receiver communication channel I have used the below command in Run Operating System
.And I have kept the processing mode of sender communication channel as test.
cmd.exe: /C "del /Leela/test.xml"
You are running the comman line program configured in the receiver File Adapter,but in command line you mentioned the Sender File Folder , So i guess it's not getting processed.
Try this:
Try to run the command line in the Sender File Adapter Side
"Place this in " --> Run OS Command After Message Processing.
Hope this would work and get in parrallel with u r requirement.
regards
Srini

CL_DD_DOCUMENT delete lines or the whole input

Similar Messages

Maybe you are looking for