Cl_exithandler= get_instance return data_incons_in_exit_managem
I am new to BADI and I tried to go to this tutorial:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0456c54-0901-0010-f0b3-cd765fb99702
In the tutorial on page 12 it said the test should be successful but when I tested
in the cl_exithandler=>get_instance, i got short dump with
return code as data_incons_in_exit_managem
It seems like it does not recognize the Badi that I implemented.
What did I do wrong? I am on ECC6.0 You can view the tutorial in the above link.
THANKS.
Here is the code:
Function exit_saplszar_001.
include zxszaru01 .
Endfunction.
*& Include ZXSZARU01
data: lr_exit type ref to zif_ex_enh_szrs0003,
y_error_table type addr_error_tab.
data: act_imp_existing type c.
y_adrc_struc = x_adrc_struc.
Get BADI implementation
call method cl_exithandler=>get_instance
changing
instance = lr_exit
exceptions
no_reference = 1
no_interface_reference = 2
no_exit_interface = 3
class_not_implement_interface = 4
single_exit_multiply_active = 5
cast_error = 6
exit_not_existing = 7
data_incons_in_exit_managem = 8
others = 9
call method lr_exit->address_check
exporting
x_dialog_allowed = x_dialog_allowed
x_accept_error = x_accept_error
x_adrc_struc = x_adrc_struc
changing
y_adrc_struc = y_adrc_struc
y_retcode = y_retcode
error_table = y_error_table.
Add Badi error table to the enhancement
append lines of y_error_table to error_table.
Hi,
If you have created a New BADI, then u need to use GET BADI and CALL BADI statements.
For classic BADI you can use CL_EXITHANDLER=>get_instance.
//Kama
Edited by: Kamarajan.pkb on Apr 26, 2009 9:02 AM
Similar Messages
-
In DEV system, this piece of code is working fine. However when it moves to Testing system it dump due to cl_fpm_factory=>get_instance( ) return initial value. What could be the reason for this? Thanks!
data lo_fpm type ref to if_fpm.
lo_fpm = cl_fpm_factory=>get_instance( ).
wd_this->go_message_manager = lo_fpm->mo_message_manager.Hi Anthony,
how sure are you that the DEV and Test system running the same Netweaver SP versions ?. My doubt is that the test system is not NW7.01 (Ehp-1) . Or some thigs are not enabled in the configuration.
Regards
Senthi -
I cannot find CL_EXITHANDLER= GET_INSTANCE in standard program
i cannot find CL_EXITHANDLER=>GET_INSTANCE in standard program can u get me why
Hi,
If you have created a New BADI, then u need to use GET BADI and CALL BADI statements.
For classic BADI you can use CL_EXITHANDLER=>get_instance.
//Kama
Edited by: Kamarajan.pkb on Apr 26, 2009 9:02 AM -
Error while calling badi using class cl_exithandler with getInstance
hi experts...we are using SAP ECC 6.0 version
I have created BADI Def and Implementation using se18 and se19 with some interface methods..
Problem:
I'm writing a report to call that using class CL_EXITHANDLER but it shows an Exception..
" Exception condition "DATA_INCONS_IN_EXIT_MANAGEM" raised."
Report example:
DATA: CL_EXIT TYPE REF TO CL_EXITHANDLER,
IF_USER_INSTANCE TYPE REF TO ZIF_EX_USER_MAILID1.
CALL METHOD cl_exithandler=>get_instance
EXPORTING
EXIT_NAME = 'ZBADI_USERMAIL_DEF'
* NULL_INSTANCE_ACCEPTED = SEEX_FALSE
* IMPORTING
* ACT_IMP_EXISTING =
CHANGING
instance = IF_USER_INSTANCE
* EXCEPTIONS
* NO_REFERENCE = 1
* NO_INTERFACE_REFERENCE = 2
* NO_EXIT_INTERFACE = 3
* CLASS_NOT_IMPLEMENT_INTERFACE = 4
* SINGLE_EXIT_MULTIPLY_ACTIVE = 5
* CAST_ERROR = 6
* EXIT_NOT_EXISTING = 7
* DATA_INCONS_IN_EXIT_MANAGEM = 8
* others = 9
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
so i found that all EXITs are in the Table " SXS_ATTR"
but what i have created BADI has not exist in that Table so that it gets an Exception(while i'm debugging found this)
so kindly tel me whats problem my BADI "ZBADI_USERMAIL_DEF" not maintained that Database table
but in Implentation class its working fine..yes i have created badi in Enhancement spot so regarding what u told i'm using GET BADI and CALL BADI
DATA:W_HANDLE TYPE REF TO ZBADI_USERMAIL_DEF.
GET BADI W_HANDLE.
CALL BADI w_handle->get_user_mailid
EXPORTING
uname = UNAME
changing
mailid = W_EMAIL
WRITE: / 'UNAME:',UNAME.
WRITE: / 'EMAIL ID',W_EMAIL.
CALL BADI w_handle->get_user_address_data
EXPORTING
uname = UNAME
changing
addrdata = W_ADDRDATA
IF W_ADDRDATA IS NOT INITIAL.
WRITE: / W_ADDRDATA-BNAME,W_ADDRDATA-NAME1,W_ADDRDATA-NAME2,W_ADDRDATA-TELPR,W_ADDRDATA-TELNR,W_ADDRDATA-TEL01.
ENDIF.
but here BADI are not called
Interface implementation class methods not executed so kindly tel me whats problem here.
Thanks in Advance
sivakumar -
Runtime error "DATA_INCONS_IN_EXIT_MANAGEM" while executing a BADI
Hi Experts,
I am trying to use a BADI in my report Program.
But it is throwing a runtime error "DATA_INCONS_IN_EXIT_MANAGEM".
I debugged the program and found that the call to the GET_INSTANCE method of Class CL_EXITHANDLER is raising this error.
It is because the instance parameter is Initial.
Can you please let me know, what is the mistake i am doing.
My report code is as follows:
*& Report Z_GKR_BADI_01
REPORT z_gkr_badi_01.
CLASS cl_exithandler DEFINITION LOAD.
DATA: l_badi_instance TYPE REF TO zif_ex_gkr_matnrdata, "BADI Interface
mara LIKE mara.
PARAMETERS: p_matnr LIKE mara-matnr OBLIGATORY.
START-OF-SELECTION.
CALL METHOD cl_exithandler=>get_instance
EXPORTING
exit_name = 'ZGKR_MATNRDATA' "BADI Definition Name
null_instance_accepted = 'X'
CHANGING
instance = l_badi_instance.
CALL METHOD l_badi_instance->get_materials
EXPORTING
matnr = p_matnr
IMPORTING
mara = mara.
WRITE: /5 mara-matnr,
mara-matkl,
mara-meins.
Cheers
Gaurav RaghavHi lakshmi,
I am new to BADI and i am doing a tutorial.
The Complete Code is given with at the thread starting.
In the Interface method i am retreiving Material details from the table MARA based on MATNR.
The code is as follows:
*& Report Z_GKR_BADI_01
REPORT z_gkr_badi_01.
CLASS cl_exithandler DEFINITION LOAD.
DATA: l_badi_instance TYPE REF TO zif_ex_gkr_matnrdata,
mara LIKE mara.
PARAMETERS: p_matnr LIKE mara-matnr OBLIGATORY.
START-OF-SELECTION.
CALL METHOD cl_exithandler=>get_instance
EXPORTING
exit_name = 'ZGKR_MATNRDATA'
null_instance_accepted = 'X'
CHANGING
instance = l_badi_instance.
CALL METHOD l_badi_instance->get_materials
EXPORTING
matnr = p_matnr
IMPORTING
mara = mara.
WRITE: /5 mara-matnr,
mara-matkl,
mara-meins.
Interface Method Implementaion in BADI
METHOD zif_ex_gkr_matnrdata~get_materials.
IF NOT matnr IS INITIAL.
SELECT SINGLE *
FROM mara
INTO mara
WHERE matnr = matnr.
ENDIF.
ENDMETHOD.
I checked and i didn't find the entry in the table mentioned by you.
But isnt the entry supposed to come automatically once i define the BADI.
The BADI Definition name is ZGKR_MATNRDATA.
Please help me regarding the same. -
hi all
i havnt worked on badi before.
i have to use the value returned by a badi in "if" condition.
i just know the badi/implimentation name.
when i try to find where this badi is used, all i get is the implementation name (which i already know)
is the badi even used anywhere (because i dont see any program name in "where used list") ?
Should it be called or will it be called automatically?
also, i have tried calling this badi using:
data : flag type string,
Implementation_instance type ref to <implementaion_name>
CALL METHOD cl_exithandler=>get_instance
EXPORTING
exit_name = <badi_name>
null_instance_accepted = 'X'
IMPORTING
act_imp_existing = flag
CHANGING
instance = Implementation_instance
EXCEPTIONS
OTHERS = 0.
CALL METHOD Implementation_instance-<interface_name>~<method_name>.
EXPORTING
p1 = a1
IMPORTING
p2 = a2
but i get the following error.
The type "<implementaion_name>" is unknown.
I just have to use the value returned by this badi. Someone Please tell me how to do it.
ThanksHi,
The way you are calling the BAdi implementation is perfect. However the declaration
Implementation_instance type ref to <implementaion_name>
is wrong, the implementation instance should reference the class behind the BAdi. Every BAdi has a class/interface.
Go to SE18, enter the BAdi name and goto interface tab. In that you will see the name of the Inteface of the Badi say <interface_name>, hence your declaration for implemntation should be
Implementation_instance type ref to <interface_name>.
Then make sure you create an implementation for the BAdi from SE19 transaction and activate it.
Then test your program agian.
Cheers. -
DATA_INCONS_IN_EXIT_MANAGEM - reg BADIs
Hi,
I have written a BADI and trying to invoke a method in it from my ABAP report program.
This is the piece of code that i am executing:
DATA: exit_ref TYPE REF TO ZVEN_INT.
CALL METHOD cl_exithandler=>get_instance
EXPORTING exit_name = 'ZVEN_INT'
CHANGING instance = exit_ref.
CALL METHOD exit_ref->OPENPAGE.
where ZVEN_INT is the Interface and OPENPAGE is a method available in the interface. I have written the implementation also and everything is Active.
But i am getting an while trying to get the exit handler instance.
<i>DATA_INCONS_IN_EXIT_MANAGEM</i>
Where am i going wrong?
Thanks,
VenkatHi,
First check the BADI implementation is active or not??
You can insert the record in the DB table.
Go to SE11->display the table name->display the entries->select one record and click on display F7->enter the debugging mode by entering /h in command field ->enter->it will go to "form set_status_val..." in debugging mode->here change the value 'CODE'
variable to 'INSR'->f8->you are able to insert the record now in a standard table.
But I am not sure this will help you.
Regards
Praveen -
DATA_INCONS_IN_EXIT_MANAGEM error in BADI
Hello friends,
I had created a BADI which is showing DATA_INCONS_IN_EXIT_MANAGEM error in CL_EXITHANDLER=>GET_INSTANCE
method call.
when I gone through with other threads in SDN similar to this error I came to know there is no entry for my created BADI
in SXS_INTER and SXS_ATTR tables.
I had tried to insert the values manually in these tables, but as these are SAP tables I am unable to insert the data without access key.
My Question is:- is there any possible way that I can insert data in SAP tables or any other way I can successfully run my BADI program?
Edited by: shubh_ag on Dec 16, 2010 1:08 PMHi,
First check the BADI implementation is active or not??
You can insert the record in the DB table.
Go to SE11->display the table name->display the entries->select one record and click on display F7->enter the debugging mode by entering /h in command field ->enter->it will go to "form set_status_val..." in debugging mode->here change the value 'CODE'
variable to 'INSR'->f8->you are able to insert the record now in a standard table.
But I am not sure this will help you.
Regards
Praveen -
Badi help need .. new to badi
Hi ,
In ECC 6.0 , Im creating custom badi 'zbadi' in se18 . Interface name : zbadi_inf ,
impl class : zbadi_imp,
method name : test ,
variable is var type vbak-vbelnr which is exporting .
In program I m calling this badi
my code is :
class cl_exithandler definition load. "Declaration
data exit type ref to Zbadi_inF. "Interface reference
DATA VAR TYPE MARA-MATNR VALUE 'SUNRISE'.
start-of-selection.
call method cl_exithandler=>get_instance "Factory method call
EXporting "Method
exit_name = u2019ZBADIu2019
changing instance = exit.
write:/'Please click here'.
at line-selection.
write:/ 'Original word: ',VAR.
if not exit is initial.
call method exit->TEST "Add-In call
IMPORTING
VAR = VAR.
endif.
write:/ 'Original word: ',VAR.
The program is giving dump . Please tell me why is it giving dump .Im very new to BADIs .
The excpetion raised is
RAISE data_incons_in_exit_managem.
I have just given a varible var which is exporting parameter in the method test in interface.
I have activated all the interface and implemenations .HI.
where are the badis and interface and classes getting stored .
goto the table seoclass.
pass class type as '0' for class
and '1' for interface.
Implementing BADI
The use of object orientated code within SAP has lead to new method of enhancing standard SAP code called
Business Add-Ins or BADI's for short. Although the implementation concept is based on classes, methods and
inheritance you do not really have to understand this fully to implement a BADI. Simply think of methods
as a function module with the same import and export parameters and follow the simple instructions below.
Steps:
1. Execute Business Add-In(BADI) transaction SE18
2. Enter BADI name i.e. HRPBSGB_HESA_NISR and press the display
button
3. Select menu option Implementation->Create
4. Give implementation a name such as Z_HRPBSGB_HESA_NISR
5. You can now make any changes you require to the BADI within this
implementation, for example choose the Interface tab
6. Double click on the method you want to change, you can now enter
any code you require.
7. Please note to find out what import and export parameters a
method has got return the original BADI definition
(i.e. HRPBSGB_HESA_NISR) and double click on the method name
for example within HRPBSGB_HESA_NISR contract is a method
8. When changes have been made activate the implementation
http://esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
http://esnips.com/doc/365d4c4d-9fcb-4189-85fd-866b7bf25257/customer-exits--badi.zip
http://esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt
Regards.
Kiran Sure -
How many implmentation allowed of BAdi with multiple use option???
Dear all ,
I have doubt in BAdi implementation -
Case 1 - I have create a z badi with multiple use option enabled . than i create two implementation of that BAdi . when i call it from my z program than it will call only one which was created 1st so what is use of 2nd implementation and when it will call ???
Case 2 - Same case for tcode VD02 their is badi CUSTOMER_ADD_DATA which is also multiple option enable Badi
for this also i have created 2 implementation but in this case when i create 2nd implementation it asked for migration of implementation why ???
ThanksDear deepak ,
i have check it both implementation showing yellow color please check my z program and tell me what is wrong in this .
REPORT Y_BADI_EXP1.
CLASS cl_exithandler DEFINITION LOAD.
DATA : l_badi TYPE REF TO ZIF_EX_MYBADI,
email TYPE AD_SMTPADR,
email1 TYPE AD_SMTPADR..
PARAMETERS : p_user TYPE sy-uname.
START-OF-SELECTION.
CALL METHOD CL_EXITHANDLER=>GET_INSTANCE
EXPORTING
EXIT_NAME = 'ZMYBADI'
NULL_INSTANCE_ACCEPTED = 'X'
CHANGING
INSTANCE = l_badi " here it will return 2 implementation ZMYBADI_IM1 , ZMYBADI_IM2
EXCEPTIONS
NO_REFERENCE = 1
NO_INTERFACE_REFERENCE = 2
NO_EXIT_INTERFACE = 3
CLASS_NOT_IMPLEMENT_INTERFACE = 4
SINGLE_EXIT_MULTIPLY_ACTIVE = 5
CAST_ERROR = 6
EXIT_NOT_EXISTING = 7
DATA_INCONS_IN_EXIT_MANAGEM = 8
OTHERS = 9
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD l_badi->GET_USER_EMAILID
EXPORTING
uname = p_user
CHANGING
emaill = email.
WRITE : /5 email. " when o/p comes it shows only 1st implementation .
i placed break point in methods of both implementation but as usual it stop only at first method ??? -
Short dump while creating a plant.
Dear experts,
Iam getting a short dump whenever I try to create a plant and save it. Iam posting the contents of the dump ... Iam using Ecc 6.0 with Oracle as database. Kindly help me to resolve this ...
Runtime Errors RAISE_EXCEPTION
Date and Time 27.10.2007 17:10:59
Short text
Exception condition "DATA_INCONS_IN_EXIT_MANAGEM" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
A RAISE statement in the program "CL_EXITHANDLER================CP" raised the
exception
condition "DATA_INCONS_IN_EXIT_MANAGEM".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"RAISE_EXCEPTION" " "
"CL_EXITHANDLER================CP" or "CL_EXITHANDLER================CM001"
"GET_INSTANCE"
or
"CL_EXITHANDLER================CP" "DATA_INCONS_IN_EXIT_MANAGEM"
or
"SAPLS_IMG_TOOL_5 " "DATA_INCONS_IN_EXIT_MANAGEM"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "BSLERP"
Network address...... "10.60.0.30"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "4x Intel 801586"
Character length.... 16 Bits
Pointer length....... 32 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "BSLERP"
Database type..... "ORACLE"
Database name..... "BTS"
Database user ID.. "SAPSR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Apr 2 2006 23:08:16"
create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version. "OCI_10103_SHARE "
Patch level. 52
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
Memory consumption
Roll.... 8176
EM...... 17768808
Heap.... 0
Page.... 65536
MM Used. 12293456
MM Free. 1291704
User and Transaction
Client.............. 800
User................ "MURTHYTSN"
Language key........ "E"
Transaction......... "SPRO "
Program............. "CL_EXITHANDLER================CP"
Screen.............. "SAPLSZA1 0201"
Screen line......... 70
Information on where terminated
Termination occurred in the ABAP program "CL_EXITHANDLER================CP" -
in "GET_INSTANCE".
The main program was "SAPLS_IMG_TOOL_5 ".
In the source code you have the termination point in line 36
of the (Include) program "CL_EXITHANDLER================CM001".
Source Code Extract
Line
SourceCde
6
type_ref TYPE REF TO cl_abap_typedescr,
7
class_name TYPE seoclsname,
8
abs_type_classname TYPE string,
9
def_impl TYPE seex_boolean VALUE seex_false,
10
mig_enhspotname TYPE enhspotname,
11
is_impl TYPE enhboolean,
12
mig_badi_name TYPE enhbadiid.
13
14
CALL METHOD cl_exithandler=>get_class_name_by_interface
15
EXPORTING
16
instance = instance
17
IMPORTING
18
class_name = class_name
19
CHANGING
20
exit_name = exit_name
21
EXCEPTIONS
22
no_reference = 1
23
no_interface_reference = 2
24
no_exit_interface = 3
25
data_incons_in_exit_managem = 4
26
class_not_implement_interface = 5
27
OTHERS = 6.
28
CASE sy-subrc.
29
WHEN 1.
30
RAISE no_reference.
31
WHEN 2.
32
RAISE no_interface_reference.
33
WHEN 3.
34
RAISE no_exit_interface.
35
WHEN 4.
>>>>>
RAISE data_incons_in_exit_managem.
37
WHEN 5.
38
RAISE class_not_implement_interface.
39
ENDCASE.
40
41
CONCATENATE '\CLASS=' class_name INTO abs_type_classname.
42
43
Is the given instance initial?
44
IF NOT instance IS INITIAL.
45
CALL METHOD cl_abap_typedescr=>describe_by_object_ref
46
EXPORTING
47
p_object_ref = instance
48
RECEIVING
49
p_descr_ref = type_ref.
50
CHECK type_ref->absolute_name NE abs_type_classname.
51
ENDIF.
52
53
SELECT SINGLE mig_enhspotname mig_badi_name FROM sxs_attr INTO (mig_enhspotname,mig_badi_n
54
WHERE exit_name = exit_name.
55
Contents of system fields
Name
Val.
SY-SUBRC
4
SY-INDEX
1
SY-TABIX
0
SY-DBCNT
0
SY-FDPOS
0
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
ADDR0200
SY-UCOMM
CHCK
SY-TITLE
Edit address: 5002
SY-MSGTY
SY-MSGID
SY-MSGNO
000
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO
0
SY-DATUM
20071024
SY-UZEIT
171059
SY-XPROG
SAPCNVE
SY-XFORM
CONVERSION_EXIT
Active Calls/Events
No. Ty. Program Include Line
Name
43 METHOD CL_EXITHANDLER================CP CL_EXITHANDLER================CM001 36
CL_EXITHANDLER=>GET_INSTANCE
42 FUNCTION SAPLXSZAR ZXSZARU01 25
EXIT_SAPLSZAR_001
41 FUNCTION SAPLSZAR LSZARU01 108
ADDR_REGIONAL_DATA_CHECK
40 FORM SAPLSZA2 LSZA2F20 382
CHECK_ADDR1_DATA
39 FUNCTION SAPLSZA2 LSZA2U02 42
ADDR_CHECK
38 FUNCTION SAPLSZA0 LSZA0U01 79
ADDR_INSERT
37 FORM SAPLSZA1 LSZA1F22 1886
INSERT_ADDRESS_INTO_MEMORY
36 FORM SAPLSZA1 LSZA1F22 2234
PUT_ADDRESS_TO_MEMORY
35 FORM SAPLSZA1 LSZA1I02 409
D0100_OK_CODE
34 FORM SAPLSZA1 LSZA1F03 17
D0100_OK_CODE_WRAPPER
33 MODULE (PAI) SAPLSZA1 LSZA1I02 13
D0100_OK_CODE
32 FUNCTION SAPLSZA1 LSZA1U01 200
ADDR_DIALOG_INTERN
31 FUNCTION SAPLSZA1 LSZA1U05 177
ADDR_DIALOG
30 FORM SAPL0ORG LSVIMF24 292
ADDRESS_MAINTAIN
29 FORM SAPL0ORG LSVIMFX2 577
DETAIL_PAI
28 MODULE (PAI) SAPL0ORG LSVIMIXX 354
DETAIL_PAI
27 FORM SAPL0ORG LSVIMF2L 337
CALL_DYNPRO
26 FUNCTION SAPL0ORG L0ORGU34 35
VIEWPROC_V_T001W
25 FUNCTION SAPL0ORG L0ORGU33 49
VIEWFRAME_V_T001W
24 FUNCTION SAPLSVIM LSVIMU01 138
VIEW_MAINTENANCE
23 FUNCTION SAPLSVIM LSVIMU03 427
VIEW_MAINTENANCE_CALL
22 FORM SAPLS_CUS_ACTIVITY LS_CUS_ACTIVITYF01 358
START_SELECTED_TRANSACTION
21 MODULE (PAI) SAPLDSYH LDSYHI12 56
D1200_PAI_MODULE
20 FUNCTION SAPLDSYH LDSYHU11 70
OUTLINE_LIST_TCODES
19 FUNCTION SAPLS_CUS_ACTIVITY LS_CUS_ACTIVITYU07 103
S_CUS_ACTIVITY_EXECUTE
18 FUNCTION SAPLS_CUS_IMG_ACTIVITY LS_CUS_IMG_ACTIVITYU04 35
S_CUS_IMG_ACTIVITY_EXECUTE
17 FUNCTION SAPLS_IMG_TOOL_1 LS_IMG_TOOL_1U02 63
STREE_EXIT_TO_OBJECT_COBJ
16 FUNCTION SAPLSHI1 LSHI1U16 120
STREE_EXIT_TO_OBJECT
15 FORM SAPLSHI01 LSHI01F0Y 185
EXIT_TO_OBJECT_HC
14 FORM SAPLSHI01 LSHI01F05 70
HANDLE_LINK_CLICK
13 METHOD SAPLSHI01 LSHI01CI1 25
LCL_APPLICATION=>HANDLE_LINK_CLICK
12 METHOD CL_ITEM_TREE_CONTROL==========CP CL_ITEM_TREE_CONTROL==========CM013 53
CL_ITEM_TREE_CONTROL=>HANDLE_NODE_KEY_ITEM_NAME_EVT
11 METHOD CL_ITEM_TREE_CONTROL==========CP CL_ITEM_TREE_CONTROL==========CM00S 60
CL_ITEM_TREE_CONTROL=>HANDLE_EVENT
10 METHOD CL_GUI_COLUMN_TREE============CP CL_GUI_COLUMN_TREE============CM01O 15
CL_GUI_COLUMN_TREE=>HANDLE_EVENT
9 METHOD CL_TREE_CONTROL_BASE==========CP CL_TREE_CONTROL_BASE==========CM017 32
CL_TREE_CONTROL_BASE=>DISPATCH
8 METHOD CL_GUI_CFW====================CP CL_GUI_CFW====================CM001 138
CL_GUI_CFW=>DISPATCH
7 FORM SAPLSHI01 LSHI01F1M 17
EXECUTE_USER_COMMAND_W_EXITS
6 FUNCTION SAPLSHI01 LSHI01U12 30
STREE_BROWSER_PAI
5 MODULE (PAI) SAPLSHI01 LSHI01I01 55
PAI_200
4 FUNCTION SAPLSHI01 LSHI01U07 165
STREE_BROWSER_DYNP_HC
3 FUNCTION SAPLSHI21 LSHI21U03 144
STREE_EXTERNAL_DISPLAY
2 FORM SAPLS_IMG_TOOL_5 LS_IMG_TOOL_5F01 20
DISPLAY_REFERENCE_IMG
1 MODULE (PAI) SAPLS_IMG_TOOL_5 LS_IMG_TOOL_5I01 39
USER_COMMAND_0100
Chosen variables
Name
Val.
No. 43 Ty. METHOD
Name CL_EXITHANDLER=>GET_INSTANCE
EXIT_NAME
22222222222222222222
00000000000000000000
00000000000000000000
00000000000000000000
NULL_INSTANCE_ACCEPTED
2
0
0
0
ACT_IMP_EXISTING
2
0
0
0
INSTANCE
F0000000
F0000000
SY-REPID
CL_EXITHANDLER================CP
4454545444444533333333333333334522222222
3CF589481E4C52DDDDDDDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
%_SPACE
2
0
0
0
CL_DRAGDROP=>COPY
1
0000
1000
CL_WB_REQUEST=>TO_IMMEDIATE_START
SY-SUBRC
4
0000
4000
CL_DRAGDROP=>USEDEFAULTEFFECT
4
0000
4000
SYST-REPID
CL_EXITHANDLER================CP
4454545444444533333333333333334522222222
3CF589481E4C52DDDDDDDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
CL_GUI_CONTROL=>LIFETIME_DEFAULT
0
0000
0000
%_ARCHIVE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ABS_TYPE_CLASSNAME
No. 42 Ty. FUNCTION
Name EXIT_SAPLSZAR_001
IV_NATION
2
0
0
0
X_ACCEPT_ERROR
2
0
0
0
X_ADRC_STRUC
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
X_DIALOG_ALLOWED
X
5
8
0
0
Y_ADRC_STRUC
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
Y_RETCODE
2
0
0
0
ERROR_TABLE[]
Table IT_2299[0x572]
\FUNCTION-POOL=SZA1\FORM=INSERT_ADDRESS_INTO_MEMORY\DATA=ERROR_TABLE[]
Table reference: 208
TABH+ 0(20) = 00000000F8EB2E3D00000000D0000000FB080000
TABH+ 20(20) = 000000003C020000FFFFFFFF04A90100303E0000
TABH+ 40( 8) = 10000000C1248001
store = 0x00000000
ext1 = 0xF8EB2E3D
shmId = 0 (0x00000000)
id = 208 (0xD0000000)
label = 2299 (0xFB080000)
fill = 0 (0x00000000)
leng = 572 (0x3C020000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000317
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = Not allocated
pghook = Not allocated
idxPtr = Not allocated
shmTabhSet = Not allocated
id = Not allocated
refCount = Not allocated
tstRefCount = Not allocated
lineAdmin = Not allocated
lineAlloc = Not allocated
shmVersId = Not allocated
shmRefCount = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook = 0x00000000
collHook = 0x00000000
ext2 = 0xD09AD03C
>>>>> 2nd level extension part <<<<<
tabhBack = 0x30F18E3D
delta_head = 000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x00000000
pb_handle = 0x00000000
SY-XPROG
SAPCNVE
5454454222222222222222222222222222222222
3103E65000000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
SY-XFORM
CONVERSION_EXIT
444545544454545222222222222222
3FE65239FEF5894000000000000000
000000000000000000000000000000
000000000000000000000000000000
%_VIASELSCR
0
4
%_SPACE
2
0
0
0
SY-REPID
SAPLXSZAR
5454555452222222222222222222222222222222
310C83A120000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
LR_EXIT
F0000000
F0000000
%_DUMMY$$
2222
0000
0000
0000
Y_ERROR_TABLE
Table[initial]
No. 41 Ty. FUNCTION
Name ADDR_REGIONAL_DATA_CHECK
IV_NATION
2
0
0
0
X_ACCEPT_ERROR
2
0
0
0
X_ADRC_STRUC
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
X_DIALOG_ALLOWED
X
5
8
0
0
X_T005
800IN IND064 ININD000 00 15500 4111 0000 00 436 664000INDIEN 000 1
3334424443332222222222224444433322233233333223333223333233233322222233333344444423332322222222
8009E09E40640000000000009E9E40000000001550000411100000000004360000006640009E495E00000100000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
Y_ADRC_REGIO
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
Y_ADRC_STRUC
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
Y_RETCODE
2
0
0
0
ERROR_TABLE[]
Table IT_2299[0x572]
SY-XPROG
SAPCNVE
5454454222222222222222222222222222222222
3103E65000000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
LV_MAND
C
422
300
000
000
SY-REPID
SAPLSZAR
5454554522222222222222222222222222222222
310C3A1200000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
%_SPACE
2
0
0
0
%_CX_GRID_ID
1
0000
1000
SYST-REPID
SAPLSZAR
5454554522222222222222222222222222222222
310C3A1200000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
SV_THERE_IS_CUST_EXIT
X
5
8
0
0
T005S
22222222222222
00000000000000
00000000000000
00000000000000
T005
00 000 00 00 00 00 0000 00 000 000
2222222223322222222222222222233322233233233222332223333233222222222222233322222223332222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
CO_ERROR
E
4
5
0
0
No. 40 Ty. FORM
Name CHECK_ADDR1_DATA
SY-MSGV3
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
SY-MSGV4
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
FIELDNAME
222222222222222222222222222222
000000000000000000000000000000
000000000000000000000000000000
000000000000000000000000000000
C_NULL
0
0000
0000
RETURNCODE_ERRORS
2
0
0
0
C_ERROR_OCCURRED
E
4
5
0
0
H_ADRC_STRUC+0(1800)
2020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ADDR1_DATA+460(1800)
2020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
H_ADRC_STRUC
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
C_COMM_TTX
TTX
555
448
000
000
NATION
2
0
0
0
G_ACCEPT_ERROR
2
0
0
0
G_DIALOG_ALLOWED
X
5
8
0
0
T005
800IN IND064 ININD000 00 15500 4111 0000 00 436 664000INDIEN 000 1
3334424443332222222222224444433322233233333223333223333233233322222233333344444423332322222222
8009E09E40640000000000009E9E40000000001550000411100000000004360000006640009E495E00000100000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
TSAD6T
222222222222222222222222222222222222222222222222
000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000
ERROR_TABLE[]
Table IT_2299[0x572]
%_SPACE
2
0
0
0
No. 39 Ty. FUNCTION
Name ADDR_CHECK
ADDRESS_HANDLE
8005002
3333333222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
8005002000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ADDRESS_NUMBER
2222222222
0000000000
0000000000
0000000000
ADDRESS_OBJECT_TYPE
1
3
1
0
0
NATION
2
0
0
0
RETURNCODE
2
0
0
0
ERROR_TABLE[]
Table IT_2299[0x572]
ADDRESS_DATA_1
00000000000000000003XYZ SOLUTIONS LIMITED
3333333333333333333355525445544452444454422222222222222222222222222222222222222222222222222222
0000000000000000000389A03FC549FE30C9D945400000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ADDRESS_DATA_2
0000000000000000
3333333333333333222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ADDRESS_DATA_3
0000000000000000
3333333333333333222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
LV_ADRC_STRUC+0(1800)
2020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ADDRESS_DATA_1+460(1800)
2020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
C_DEFAULT_HANDLE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
SYST-REPID
SAPLSZA2
5454554322222222222222222222222222222222
310C3A1200000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
ERROR_TABLE
000
2222222222222222222223332222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
LV_ADRC_STRUC
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
C_DEFAULT_NATION
2
0
0
0
C_SHOW_ALL
2
0
0
0
C_PERSONAL_ADDRESS
2
3
2
0
0
SY-REPID
SAPLSZA2
5454554322222222222222222222222222222222
310C3A1200000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
ADDRESS_DATA_2+32(1800)
2020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
No. 38 Ty. FUNCTION
Name ADDR_INSERTDear Sunil,
Thanks a lot for your reply. I did search in service market place for notes regarding this problem. However, i could not find possible solutions to resolve this. I will once again search the notes in case if i have missed something. in case, if you come across any solutions to resolve this problem, Kindly post that here and that would be a great help for me.
Regards,
Chaitanya -
RE: Short dump after activation of BADI
Hi all,
We are getting short dumps in all the transactions after activating the BADI 'BADI_LAYER'
We are not able to execute any of the transactions.
The details of runtimeerror
Runtime Errors RAISE_EXCEPTION
Date and Time 30.07.2007 09:58:06
Short text
Exception condition "SINGLE_EXIT_MULTIPLY_ACTIVE" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
A RAISE statement in the program "CL_EXITHANDLER================CP" raised the
exception
condition "SINGLE_EXIT_MULTIPLY_ACTIVE".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"RAISE_EXCEPTION" " "
"CL_EXITHANDLER================CP" or "CL_EXITHANDLER================CM001"
"GET_INSTANCE"
or
"CL_EXITHANDLER================CP" "SINGLE_EXIT_MULTIPLY_ACTIVE"
or
"SAPMF05A " "SINGLE_EXIT_MULTIPLY_ACTIVE"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "sapdevp"
Network address...... "192.168.0.205"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "4x Intel 80686"
Character length.... 16 Bits
Pointer length....... 32 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "SAPDEVP"
Database type..... "ORACLE"
Database name..... "TDV"
Database user ID.. "SAPSR4"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Apr 2 2006 23:08:16"
create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version. "OCI_10103_SHARE "
Patch level. 52
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
Memory consumption
Roll.... 8176
EM...... 6271344
Heap.... 0
Page.... 57344
MM Used. 1728072
MM Free. 360856
User and Transaction
Client.............. 400
User................ "FIUSER01"
Language key........ "E"
Transaction......... "FB50 "
Program............. "CL_EXITHANDLER================CP"
Screen.............. "SAPMF05A 1010"
Screen line......... 7
Information on where terminated
Termination occurred in the ABAP program "CL_EXITHANDLER================CP" -
in "GET_INSTANCE".
The main program was "SAPMF05A ".
In the source code you have the termination point in line 145
of the (Include) program "CL_EXITHANDLER================CM001".
Source Code Extract
Line
SourceCde
115
SELECT SINGLE is_impl FROM badiisimpled INTO is_impl
116
WHERE badi_name = mig_badi_name.
117
IF sy-subrc NE 0.
118
not yet filled
119
is_impl = cl_enh_badi_tool_utilities=>update_badiisimpled( mig_badi_name ).
120
ENDIF.
121
122
IF is_impl = 'X'.
123
ok at least one implementation found
124
act_imp_existing = 'X'.
125
ENDIF.
126
127
ENDIF.
128
ENDIF.
129
ELSE.
130
131
check how many implementations exist for an exit
132
CALL METHOD cl_badi_flt_data_trans_and_db=>act_imps_per_flt_val
133
EXPORTING
134
runtime_call = seex_true
135
exit_name = exit_name
136
EXCEPTIONS
137
singular_exit_multiply_active = 1
138
no_active_implementation = 2
139
only_default_implementation = 3
140
OTHERS = 4.
141
CASE sy-subrc.
142
WHEN 0.
143
act_imp_existing = seex_true.
144
WHEN 1.
>>>>>
RAISE single_exit_multiply_active.
146
WHEN 2.
147
act_imp_existing = seex_false.
148
WHEN 3.
149
act_imp_existing = seex_false.
150
def_impl = seex_true.
151
WHEN 4.
152
RAISE data_incons_in_exit_managem.
153
ENDCASE.
154
155
new parameter considered for performance purposes
156
IF act_imp_existing = seex_true OR
157
def_impl = seex_true OR
158
null_instance_accepted = seex_false.
159
160
ok, then do your job
161
CREATE OBJECT exit TYPE (abs_type_classname).
162
CATCH SYSTEM-EXCEPTIONS move_cast_error = 1.
163
instance ?= exit.
164
ENDCATCH.
Contents of system fields
Name
Val.
SY-SUBRC
1
SY-INDEX
0
SY-TABIX
0
SY-DBCNT
2
SY-FDPOS
1
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
FSKB
SY-UCOMM
SY-TITLE
Enter G/L Account Document: Company Code TJ01
SY-MSGTY
S
SY-MSGID
B!
SY-MSGNO
015
SY-MSGV1
00001140
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO
0
SY-DATUM
20070730
SY-UZEIT
095806
SY-XPROG
SY-XFORM
Active Calls/Events
No. Ty. Program Include Line
Name
5 METHOD CL_EXITHANDLER================CP CL_EXITHANDLER================CM001 145
CL_EXITHANDLER=>GET_INSTANCE
4 METHOD CL_EXIT_MASTER================CP CL_EXIT_MASTER================CM004 2
CL_EXIT_MASTER=>CLASS_CONSTRUCTOR
3 METHOD CL_EX_FI_HEADER_SUB_1300======CP CL_EX_FI_HEADER_SUB_1300======CM003 53
CL_EX_FI_HEADER_SUB_1300=>IF_EX_FI_HEADER_SUB_1300~PUT_DATA_TO_SCREEN_PBO
2 FORM SAPMF05A MF05AF00_D0100_PRE_APPL_SUB_2 50
D0100_PRE_APPL_SUB_PBO
1 MODULE (PBO) SAPMF05A MF05AO00_D0100_PRE_APPL_SUB 10
D0100_PRE_APPL_SUB
Chosen variables
Name
Val.
No. 5 Ty. METHOD
Name CL_EXITHANDLER=>GET_INSTANCE
EXIT_NAME
BADI_LAYER
44445445452222222222
2149FC19520000000000
00000000000000000000
00000000000000000000
NULL_INSTANCE_ACCEPTED
2
0
0
0
ACT_IMP_EXISTING
2
0
0
0
INSTANCE
F0000000
F0000000
%_SPACE
2
0
0
0
RSJOBINFO
00000000000000 ##
2222222222222222222222222222222233333333333333222222222222222222222222222222222200
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
%_DUMMY$$
2222
0000
0000
0000
SEEX_TRUE
X
5
8
0
0
SYST-REPID
CL_EXITHANDLER================CP
4454545444444533333333333333334522222222
3CF589481E4C52DDDDDDDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
<%_TABLE_BADIISIMPLED>
SY-REPID
CL_EXITHANDLER================CP
4454545444444533333333333333334522222222
3CF589481E4C52DDDDDDDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
SY-SUBRC
1
0000
1000
SY-XPROG
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
No. 4 Ty. METHOD
Name CL_EXIT_MASTER=>CLASS_CONSTRUCTOR
%_SPACE
2
0
0
0
SYST-REPID
CL_EXIT_MASTER================CP
4454545544554533333333333333334522222222
3CF5894FD13452DDDDDDDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
SY-REPID
CL_EXIT_MASTER================CP
4454545544554533333333333333334522222222
3CF5894FD13452DDDDDDDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
CL_EXIT_MASTER=>LAYER_EXIT
F0000000
F0000000
%_DUMMY$$
2222
0000
0000
0000
No. 3 Ty. METHOD
Name CL_EX_FI_HEADER_SUB_1300=>IF_EX_FI_HEADER_SUB_1300~PUT_DATA_TO_SCREEN_PBO
IM_BKPF
TJ01 2007SA00000000200707300400000000000000000000000000000000000000
2225433222222222233335433333333333333333333333333333333333333333333333333333333222222222222222
0004A01000000000020073100000000200707300400000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
IM_X_NO_INPUT
2
0
0
0
FLT_VAL
IN
44
9E
00
00
<EXIT_OBJ>-IMP_CLASS
<FLT_CACHE_LINE>-OBJ
|
| F0000000 |
| F0000000 |
| %_DUMMY$$ |
| |
| 2222 |
| 0000 |
| 0000 |
| 0000 |
| ME->INSTANCE_BADI_TABLE |
| Table[initial] |
| <EXIT_OBJ> |
| ??? |
| ?????? |
| ?????? |
| <%_L001> |
| ??? |
| ?????? |
| ?????? |
| RSJOBINFO |
| 00000000000000 ## |
| 2222222222222222222222222222222233333333333333222222222222222222222222222222222200 |
| 0000000000000000000000000000000000000000000000000000000000000000000000000000000000 |
| 0000000000000000000000000000000000000000000000000000000000000000000000000000000000 |
| 0000000000000000000000000000000000000000000000000000000000000000000000000000000000 |
| SY-REPID |
| CL_EX_FI_HEADER_SUB_1300======CP |
| 4454554454444455554533333333334522222222 |
| 3CF58F69F851452F352F1300DDDDDD3000000000 |
| 0000000000000000000000000000000000000000 |
| 0000000000000000000000000000000000000000 |
| <%_L001>-METHOD_NAME |
| ??? |
| ?????? |
| ?????? |
| EXIT_OBJ_TAB |
| Table[initial] |
| SY-SUBRC |
| 1 |
| 0000 |
| 1000 |
| ME |
|
F0000000
C0003000
SXRT_TRUE
X
5
8
0
0
No. 2 Ty. FORM
Name D0100_PRE_APPL_SUB_PBO
*BSEG-STBUK
2222
0000
0000
0000
%_DUMMY$$
2222
0000
0000
0000
SY-REPID
SAPMF05A
5454433422222222222222222222222222222222
310D605100000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
SYST-REPID
SAPMF05A
5454433422222222222222222222222222222222
310D605100000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
KDBTAB-DMBTR
0.0.0.0.0.0.1.
0000000
000000C
%_SPACE
2
0
0
0
KDPTAB-BELNR
2222222222
0000000000
0000000000
0000000000
KDPTAB-GJAHR
0000
3333
0000
0000
0000
KDPTAB-BUZEI
000
333
000
000
000
KDBTAB-XRUND
2
0
0
0
SPACE
2
0
0
0
F05ACTRL
2
0
0
0
SYST
######################################ð#######################################~######### C####
00000000000000000000000000000000000000F0000000000000000000000000000000000000107000000050240000
000000200000000000002010100010000000000000000010400000000000000000000000000080E000200080030100
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000040000000
00000000000000000000000000000000000000000000000000000000000000000000000000000000000000D000000C
BSED
0000000# ############## 0000000000000000
2222222222222222233333330200000000000000223333333333333333222222222222222222222222222222222222
00000000000000000000000000000C000000C000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
000000000000000000000000C0000000C000000C000000000000000000000000000000000000000000000000000000
SY-SUBRC
1
0000
1000
G_APPL_SUB_ACTIVE
X
5
8
0
0
CHAR_X
X
5
8
0
0
%_ARCHIVE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
BKPF-BUKRS
TJ01
5433
4A01
0000
0000
BKPF
TJ01 2007SA00000000200707300400000000000000000000000000000000000000
2225433222222222233335433333333333333333333333333333333333333333333333333333333222222222222222
0004A01000000000020073100000000200707300400000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
G_APPL_SUB_DISABLE
2
0
0
0
T005-INTCA
IN
44
9E
00
00
No. 1 Ty. MODULE (PBO)
Name D0100_PRE_APPL_SUB
C_FIELD_DIALOG_ALL
BUTTON_DIALOG_ALL
4555445444444544422222222222222222222222222222222222222222222222222222222222222222222222222222
2544FEF491CF7F1CC00000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
Internal notes
The termination was triggered in function "ab_jfune"
of the SAP kernel, in line 2561 of the module
"//bas/700_REL/src/krn/runt/abfunc.c#10".
The internal operation just processed is "FUNE".
Internal mode was started at 20070730095806.
Active Calls in SAP Kernel
Lines of C Stack in Kernel (Structure Differs on Each Platform)
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Callstack without Exception:
App : disp+work.EXE (pid=4436)
When : 7/30/2007 9:58:6.359
Threads : 2
Computer Name : SAPDEVP
User Name : SAPServiceTDV
Number of Processors: 4
Processor Type: x86 Family 6 Model 15 Stepping 6
Windows Version : 5.2 Current Build: 3790
State Dump for Thread Id 250c
eax=34d52300 ebx=000003f8 ecx=0001ccc0 edx=34d039e0 esi=000003f8 edi=00000000
eip=7c82ed54 esp=053fceb4 ebp=053fcf24 iopl=0 nv up ei ng nz ac po cy
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00200297
function : KiFastSystemCallRet
7c82ed54 c3 ret
7c82ed55 8da42400000000 lea esp,[esp] ss:053fceb4=7c822124
7c82ed5c 8d642400 lea esp,[esp] ss:6627b4c7=00002100
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
053fcf24 77e6ba42 000003f8 0001d4c0 00000000 053fcf5c ntdll!KiFastSystemCallRet
053fcf38 0100b3aa 000003f8 0001d4c0 00000001 7c38b5c8 kernel32!WaitForSingleObject
053fcf5c 0055b4ac 0055b4e5 7c38b5c8 7c38b5c8 7c38b5c8 disp+work!NTDebugProcess
053fcf60 0055b4e5 7c38b5c8 7c38b5c8 7c38b5c8 01d35ab0 disp+work!NTStack
053fcf7c 0055b519 7c38b5c8 00000000 008536a8 7c38b5c8 disp+work!CTrcStack2
053fcf88 008536a8 7c38b5c8 00000000 005f0059 00300030 disp+work!CTrcStack
053fcfac 008569fa 6d1d037c 0000001b 00000000 01cfc168 disp+work!rabax_CStackSave [abrabax.c (6871)
053fd084 006aaaf4 0134837c 0134835c 00000a01 235f1640 disp+work!ab_rabax
053fd0c0 0067bb56 00000003 34cf5708 00000000 053fd128 disp+work!ab_jfune
053fd128 007af183 00000000 34cf5708 053fd274 34cf8c26 disp+work!ab_extri
053fd13c 00837a37 00000000 34cf7dd6 00596fa0 34cf68b4 disp+work!ab_xevent
053fd148 00596fa0 34cf68b4 000003db 34cf7dd6 00000000 disp+work!ab_dstep
053fd274 00597fa1 34cf5708 34cf5708 053ffd04 00597b13 disp+work!dynpmcal
053fd284 00597b13 34cf5708 34cf5708 00000003 053ffd04 disp+work!dynppbo0
053fd2a0 0056dcf1 34cf5708 0006e768 00000000 0000000c disp+work!dynprctl
053ffd04 00471848 00000013 07de0048 00000001 00494960 disp+work!dynpen00
053ffd14 00494960 0000000c 00000000 00000003 00000002 disp+work!Thdynpen00
053ffee0 00494ee2 00000001 00000000 00000000 00430000 disp+work!TskhLoop
053fff00 00421150 00000000 00000000 7ffd8000 053fff60 disp+work!ThStart
053fff14 00401080 00000003 003f6850 00000001 00000000 disp+work!DpMain
053fff60 011a94a0 00000003 003f6850 003f78f8 01bd5000 disp+work!nlsui_main
053fffc0 77e523e5 00000000 00000000 7ffd8000 88602680 disp+work!wmainCRTStartup
053ffff0 00000000 011a935d 00000000 00905a4d 00000003 kernel32!IsProcessorFeaturePresent
State Dump for Thread Id 27bc
eax=00000001 ebx=00000103 ecx=fffffffe edx=003f01f8 esi=00000000 edi=00000000
eip=7c82ed54 esp=075dfec0 ebp=075dff04 iopl=0 nv up ei pl zr na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000246
function : KiFastSystemCallRet
7c82ed54 c3 ret
7c82ed55 8da42400000000 lea esp,[esp] ss:075dfec0=7c821514
7c82ed5c 8d642400 lea esp,[esp] ss:6845e4d3=50004500
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
075dff04 010f7ffc 000006c0 00000000 00000000 003f77d0 ntdll!KiFastSystemCallRet
075dff84 7c349565 00000000 00000000 00000000 0587ff08 disp+work!SigIMsgFunc
075dffb8 77e6608b 0587ff08 00000000 00000000 0587ff08 MSVCR71!endthreadex
075dffec 00000000 7c3494f6 0587ff08 00000000 00000000 kernel32!GetModuleFileNameA
List of ABAP programs affected
Index
Typ
Program
Group
Date
Time
Size
Lang.
0
Prg
SAPMF05A
0
22.05.2007
11:37:49
1563648
E
1
Prg
SAPMSSYD
0
10.01.2007
12:33:28
21504
E
2
Prg
SAPFSYSCALLS
0
09.09.2004
14:18:32
8192
E
3
Typ
TFDIR
0
13.02.2005
17:31:57
3072
4
Prg
SAPLAPAR_EBPP_SERVICES
4
03.01.2007
11:23:55
114688
E
5
Typ
T042ZEBPP
0
08.01.2002
14:42:24
2048
6
Typ
T020
0
24.02.1999
03:17:19
3072
7
Typ
RFOPT2
0
11.12.2003
15:00:17
5120
8
Prg
SAPFF001
0
22.05.2007
11:37:49
195584
E
9
Typ
SWOTOBJID
0
04.05.1995
15:20:52
2048
10
Prg
SAPLSWOR
10
10.01.2007
12:33:34
292864
E
11
Typ
TFBUF
0
30.11.1998
22:08:34
3072
12
Typ
ACC_KONTEXT
0
08.01.2003
17:30:26
3072
13
Typ
BKPF
0
13.03.2006
11:01:29
18432
14
Prg
SAPLFACSCORE
14
01.12.2006
22:00:12
13312
E
15
Typ
T001
0
25.08.2005
22:03:13
13312
16
Prg
SAPLACHD
16
03.01.2007
11:23:55
51200
E
17
Prg
SAPFSPOR
0
09.09.2004
14:18:32
15360
E
18
Prg
SAPLSCNT
18
18.02.2005
14:16:06
30720
E
19
Typ
DYCBOX
0
20.08.1998
11:16:53
3072
20
Prg
SAPLSVSM
20
18.02.2005
14:16:06
27648
E
21
Prg
SAPLSGUI
21
10.01.2007
12:33:33
82944
E
22
Prg
SAPLSTTM
22
05.07.2005
13:10:18
69632
E
23
Prg
SAPLSBDC
23
05.07.2005
13:10:18
44032
E
24
Prg
CL_DATAPROVIDER===============CP
24
28.02.2005
21:00:46
49152
E
25
Prg
%_CCNTL
24
18.02.2005
14:15:08
15360
E
26
Typ
OBJ_RECORD
0
14.02.1998
08:30:43
2048
27
Prg
SAPLSTUP
27
08.03.2005
19:04:31
73728
E
28
Prg
SAPLCNDP
28
01.12.2006
22:04:33
193536
E
29
Prg
SAPSHDTV
18
05.01.2005
16:26:16
33792
E
30
Typ
SHDSTU
0
14.12.1998
23:15:34
2048
31
Typ
SHDSTCIU
0
14.12.1998
23:15:34
2048
32
Prg
SAPFGUICNTL
0
18.02.2005
14:15:08
24576
E
33
Prg
SAPLOLEA
33
05.07.2005
13:10:18
96256
E
34
Prg
SAPLSFES
34
10.01.2007
13:26:20
256000
E
35
Prg
SAPLSPLUGIN
35
09.09.2004
14:18:36
8192
E
36
Typ
ARFCRDATA
0
13.02.2005
18:20:24
7168
37
Prg
SAPLGRFC
37
13.02.2005
18:20:25
16384
E
38
Typ
SWCBCONT
0
15.11.2000
17:55:11
3072
39
Typ
OLE_VERBS
0
04.04.1995
16:02:20
2048
40
Typ
OLE_PA
0
04.04.1995
16:02:19
2048
41
Typ
ACGL_HEAD
0
11.12.2003
14:59:21
8192
42
Typ
RF05A
0
11.04.2005
11:50:21
38912
43
Typ
TCURC
0
01.12.1999
12:14:40
2048
44
Prg
SAPLFAGL_ACTIVATION_SERVICES
44
30.04.2007
17:00:55
45056
E
45
Prg
SAPLSTR9
45
09.05.2006
10:39:47
39936
E
46
Prg
CONTEXT_X_TR_SYS_PARAMS
45
09.05.2006
10:39:47
40960
E
47
Typ
TCONT
0
09.09.2004
14:18:43
2048
48
Typ
CONTEXTB
0
09.09.2004
14:15:52
6144
49
Typ
FAGL_ACTIVEC
0
19.08.2004
16:55:10
5120
50
Typ
FAGL_CHECK_SETUP
0
11.12.2003
15:01:05
2048
51
Prg
SAPLSHD0
51
03.01.2007
06:52:22
232448
E
52
Prg
SAPLBFFM3
52
10.01.2007
13:15:21
169984
E
53
Typ
OFIWA
0
15.04.1998
00:11:05
2048
54
Typ
FTEXTS
0
20.08.2001
12:13:26
3072
55
Prg
SAPLITSR
55
10.01.2007
14:23:52
107520
E
56
Typ
FMRFC
0
13.08.1997
12:32:59
2048
57
Typ
TBE01
0
20.01.2003
16:41:38
2048
58
Typ
TBE31
0
03.09.1997
03:01:11
2048
59
Typ
TBE31
0
03.09.1997
03:01:11
2048
60
Typ
TBE11
0
03.09.1997
03:01:06
2048
61
Prg
CONTEXT_X_SP_INFO
55Hello Sowmya
The BAdI BADI_LAYER is not defined for <b>Multiple-Use</b> (see checkbox on tabstrip <i>Attributes</i>).
Apparently you have created <i>several </i>implementation of this BAdI and activated <i>several </i>(at least 2) of these implementations.
If you inactivate all except a single implementation the BAdI (and all transactions using this BAdI) should work again.
Regards
Uwe -
How to find another BAdi for Transaction CCM2
I have written an Authorisation Check for transaction CCM2, but there are two select buttons.
load and load extended.
i added the Auth Check to BADI_CCM_EXPLOSION - Restrict Structure Explosion for Actual Configuration, which works okay when i click the "load" button, but this is not called on the "load Extended" button
I checked the BAdi - BADI_CCM_EXPL_ALWD - Restrict Structure Explosion of Allowed and Actual Config and BADI_CCM_CHK_STATUS Adjust the CCM2 Check Result by Technical Object but these are not called from the Transaction either.
is there another way for me to try and work what may be called within this transaction?
when i run through the debugger it always short dumps before i get anywhere as it does not like debug mode... any suggestions??? please?Please skip if you already did this!
Place a break point in method of CL_EXITHANDLER->GET_INSTANCE at line 28, CASE sy-subrc (According to ECC 6.0).
Code looks like:
CALL METHOD cl_exithandler=>get_class_name_by_interface
EXPORTING
instance = instance
IMPORTING
class_name = class_name
CHANGING
exit_name = exit_name
EXCEPTIONS
no_reference = 1
no_interface_reference = 2
no_exit_interface = 3
data_incons_in_exit_managem = 4
class_not_implement_interface = 5
OTHERS = 6.
CASE sy-subrc.--> (Right here)
This METHOD will be called before triggering any BADI in SAP. After you place a break-point just process your transaction for which you are trying a find a BADI. Before triggering every BADI, code will stop right there and you could get to know your BADI Class and Method name through variables CLASS_NAME & EXIT_NAME respectively.
Reddy -
Hi SAP Guru's,
Can someone provide me a detailed step by step procedure to create a BADI in CRM.
You can also mail me at [email protected]
Regards,
Amithi amit
Go through the following Steps
Goto Tcode SE18 for BADI Definition Creation.
give definition Name : ZBADI_CUST--> Press F5 button for Creating the Definition.
Give Description for the BADi Definition : XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
In the Attributes tab you will find "TYPE" Tab
there you will check the Check Box as "Multiple" because this badi definition is active for multiple BADI Implementations
save & check the Badi Definition.
Click on "Interface" tab
Double Click on the Interface Name that is "ZIF_EX_BADI_CUST"
here the screen is take you to tcode SE24
here you will declare the methods
give method name as "GET_MATERIAL" as INSTANCE Level.
Click on Parameters Button just above your Method"GET_MATERIAL"
and Give Parameters as
P_MATNR IMPORT Type MATNR press enter
X_MARA CHANGING MARA press enter
save check and activate your badi Definition.
Note : you just declare the method in BADI Definition Section you will write the Method Implementation
in BADI IMPLEMENTATION Section.Because BADI's are pure Abstact class.
Goto Tcode SE19:
give Implementation name as : ZBADI_CUST_IMPL and press "F5" for Creation
it asks BADI Definition name as "ZBADI_CUST" just you create .
and press enter
and you give the BADI Implementation Description : XXXXXXXXXXXXXXXXXXXX
save this Implementation
click on the Interface tab and double click on the Implementation Class as "ZCL_IM_BADI_CUST_IMPL".
then you have the GET_MATERIAL Method . double click on the Method it opens the Code window for that method.
as looks like bellow.
method ZIF_EX_BADI_CUST~GET_METERIAL .
Here you will write the coding part.
if not p_matnr is initial.
select single * from mara
into x_mara
where matnr = p_matnr.
endif.
endmethod.
save,check & activate
come back and activate again.
then you need to use this badi in SE38 program.
go through the following Code
REPORT ZCUST_BADI1_IMPL_CALL.
TABLES : MARA.
*creatingthe BADI interface ref to following class
DATA : OBJ TYPE REF TO ZIF_EX_CUST_BADI1.
PARAMETERS : P_MATNR LIKE MARA-MATNR.
START-OF-SELECTION.
*passing the BADI interface ref var to following class method to get obj of BADI business add in class
CALL METHOD CL_EXITHANDLER=>GET_INSTANCE
EXPORTING
EXIT_NAME =
NULL_INSTANCE_ACCEPTED = SEEX_FALSE
IMPORTING
ACT_IMP_EXISTING =
CHANGING
INSTANCE = OBJ
EXCEPTIONS
NO_REFERENCE = 1
NO_INTERFACE_REFERENCE = 2
NO_EXIT_INTERFACE = 3
CLASS_NOT_IMPLEMENT_INTERFACE = 4
SINGLE_EXIT_MULTIPLY_ACTIVE = 5
CAST_ERROR = 6
EXIT_NOT_EXISTING = 7
DATA_INCONS_IN_EXIT_MANAGEM = 8
others = 9
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*calling the implementation class method via business add in class object
CALL METHOD OBJ->GET_MATERIAL
EXPORTING
P_MATNR = P_MATNR
CHANGING
X_MARA = MARA.
WRITE :/ MARA-MATNR,MARA-MBRSH,MARA-MTART.
If you find useful mark the points
~~Guduri -
Hi Experts,
while i am doing MIGO(Goods Issue to Production Order, I am getting the below ABAP Error:
Please give solution, It is urgent requirement.
THE ERROR IS:
Short text
Illegal interruption of the event LOAD-OF-PROGRAM.
What happened?
Error in the ABAP Application Program
The current ABAP program "/MRSS/SAPLRAP_INT_OB" had to be terminated because it
has come across a statement that unfortunately cannot be executed.
Error analysis
During the flow of the event LOAD-OF-PROGRAM (event for the
initialization of an ABAP program), a condition occurred under which
the event was to be left early. This is not permitted as it would
result in an inconsistent status in the ABAP program.
Trigger Location of Runtime Error
Program /MRSS/SAPLRAP_INT_OB
Include /MRSS/LRAP_INT_OBF00
Row 34
Module type (FORM)
Module Name GLOBAL_INIT
Source Code Extract
Line SourceCde
4
5 *&---------------------------------------------------------------------*
6 *& Form global_init
7 *&---------------------------------------------------------------------*
8 * text
9 *----------------------------------------------------------------------*
10 FORM global_init.
11
12 * local data
13 DATA lv_badi_impl_exists TYPE flag.
14
15
16 * get ref to BAdIs
17 CALL METHOD cl_exithandler=>get_instance "#EC CI_BADI_GETINST
18 CHANGING
19 instance = gv_ref_badi_inter_company.
20 * CALL METHOD cl_exithandler=>get_instance
21 * CHANGING
22 * instance = gv_ref_badi_rap_back.
23 * CALL METHOD cl_exithandler=>get_instance
24 * CHANGING
25 * instance = gv_ref_badi_ps_int.
26 CALL METHOD cl_exithandler=>get_instance "#EC CI_BADI_GETINSTHi Rob thanks for your response. I thought about doing an OSS note however; I would think I would need to get the problem in config corrected first as it contradicts each other. The problem I am talking about is how they are to return material to vendor....I have never even seen this as a process in my 10 years....
Process.....when the PO is a return to vendor PO they go to migo and choose the goods receipt and mvmt type 101 and the system will default the 161 in the item level....the two are inconsistent. If I try to change the top level to a 161 mvmt (as this is what I am used to seeing) it gives the error that the PO is not a stock transport order... Would you agree that I should correct that problem first before creating an OSS note?
Maybe you are looking for
-
Creating Hyperlinks In Pre-Made Drop Down List Form
Ok, I am new to the whole Acrobat world but there is a pre-made object called "drop down list". When I drag it onto my page I am able to enter the title as well as the items I wish to have appear in the drop down. However, I am unable to simply go to
-
How would I transfer contact list to outlook or to file so I could print hard copy of it.
Basically subject line says it all. I would like to export contact list from phone to outlook express and or to a file that i could print a hard copy of. Is this possible? I have a day planner program that is on my computer that I would like to add a
-
Bpel process subscribing event not work
Hi all, I have a process subscribing to an AbortWithdraw event by receive activity, then a mediator to publish this AbortWithdraw event.( previously, I try publish and subscribe the event both by bpel process, but fail to receive, then found a post a
-
Excluding Desktop and Dropbox from Search
Is there a way to temporarily exclude my Desktop and Dropbox from a Spotlight search? I want to run some of these to find pdfs and image files - and then move them all - but I don't want to touch the ones in these two locations. Do I have to go into
-
Hi everyone, This is really urgent, Early watch report has showed that our update optimizer statistics are not up to date.So i m thinking to schedule Update optimizer job thro DB13.My system setup is very big n is linux based.So when do u feel is the