CL_GUI_FRONTEND_SERVICES + BSP = Exception condition "NOT_SUPPORTED_BY_GUI"
Hi,
My problem is: I am designing a BSP. Here, I call to a function, and within the function, I call methods of class CL_GUI_FRONTEND_SERVICES.
The error that appears is: Error message: Exception condition NOT_SUPPORTED_BY_GUI raised. (type of termination: RABAX_STATE) Somebody knows because it appears east error, and as I can solve it.
Thanks.
The CL_GUI_xxx Classes are proxies to the SAP GUI and require the same. So any of the mentioned methods is not available. But the BSP forum would fit better for this query.
Business Server Pages (BSP)
Regards
Klaus
/people/thomas.jung3/blog/2005/01/13/bsp-utility-classes
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7a13f367-0401-0010-47ba-eab0b15cf31c
Similar Messages
-
Exception condition "NOT_SUPPORTED_BY_GUI" raised issue
Hi experts,
I use this method CL_GUI_FRONTEND_SERVICES->FILE_OPEN_DIALOG on ABAP webdynpro.
But got subject exception.
Is it something wrong with my GUI version?
Thank you in advance.
Exception code in the method
*-check if valid GUI is available----
IF IS_VALID_HANDLE( ) NE 0 AND cl_gui_control=>www_active IS INITIAL.
RAISE NOT_SUPPORTED_BY_GUI.
ENDIF.
Note
The following error text was processed in the system NW7 : Exception condition "NOT_SUPPORTED_BY_GUI" raised.
The error occurred on the application server and in the work process 3 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: FILE_OPEN_DIALOG of program CL_GUI_FRONTEND_SERVICES======CP
Method: ONACTIONSEARCH of program /1BCWDY/8F7FTC9E6OGCQL0JTNVT==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/8F7FTC9E6OGCQL0JTNVT==CP
Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_VIEW========CP
Method: IF_WDR_ACTION~FIRE of program CL_WDR_ACTION=================CP
Method: DO_HANDLE_ACTION_EVENT of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Method: PROCESS_REQUEST of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Method: PROCESS_REQUEST of program CL_WDR_WINDOW=================CP
Method: EXECUTE of program CL_WDR_MAIN_TASK==============CP
Method: IF_WDR_RUNTIME~EXECUTE of program CL_WDR_MAIN_TASK==============CP
Richard>use this method CL_GUI_FRONTEND_SERVICES->FILE_OPEN_DIALOG on ABAP webdynpro.
and that was your problem...
this is as the class says - a GUI based call - you can't call it from the browser. Instead you should use the FileUpload UI element.
If you need any other details or want alternate solutions (including references to using Flex, ACF applet utilities etc) - have a quick search of the forum - the same issue has been reported/raised many, many times.
Good luck,
Chris -
Exception condition "NOT_SUPPORTED_BY_GUI" - BEX Query on Virtual infocube
Hi,
I receive the error message "Runtime error Exception condition "NOT_SUPPORTED_BY_GUI" raised" wheneverI try to run a BEX query built on a virtual infocube. Does anybody have idea, how could it be resolved ?
Any additional GUI component shuold be installed or some settings is missing ?
Thanks, AttilaHi,
Since Virtual Infocube tries to fetch data directly from the source system, your GUI was n't getting connected.
Goto your Cube and look for any options available to make it integrates with your GUI.
Hope you may get some idea on the issue...........
Regards,
Suman -
Exception condition "NOT_SUPPORTED_BY_GUI" raised
Hi,
Some computers get this error when trying to upload a file into a Workbook.
We can't understand why in some computers this file upload works and in other this error appears.
The SAP Gui version is the same or superior, so we cannot find any reason for this error in those computers.
Has anyone got this problem in the past?
Please help us,
Best Regards,
RuiMight be that this error is relevant to version of MS Office are you running on workstations.
I would upgrade at least SAP GUI to the most newest version first. -
"Exception condition "CONTROL_FLUSH_ERROR" raised." during background jobs
hi all,
the program ZTEST is used for downloading a txt file into D: using GUI_DOWNLOAD. this program works fine but when I schedule this porgam in background jobs in tcode SM36 using "job wizard", i am getting errors as Exception condition "CONTROL_FLUSH_ERROR" raised and the error analysis is as
'A RAISE statement in the program "SAPLSFES " raised the exception condition "CONTROL_FLUSH_ERROR".
Since the exception was not intercepted by a superior program
in the hierarchy, processing was terminated.'
How to rectify this error???
points will be rewrded
thanks in advanceGUI_DOWNLOAD is a FM that is designed to download files by interation with the PC directories (only possible in foreground). If the file download is the requirement the u can use application server files for it.
But if you are insisting on notepad and excel documents, then you have to use CLIP and EXECUTE function modules. Refer to Class CL_GUI_FRONTEND_SERVICES that has all the required methods -
Exception condition "CONFIG_NOT_FOUND" raised.
Hi,
I am trying to create an Opportunity in CRM 7.0 WEB UI. The moment i click on the create opportunity, i am getting a pop window, showing the transaction types which i have created in spro. But when i am selecting any one of them, i am getting a dump error mention in the subject matter.
I did ST22 & checked the notes on service marketplace based in the description, but could not find anything relevant to this error.
Here is, what i am getting the dump
Error when processing your request
What has happened?
The URL http://uapkb2dc.gep.ge.com:8028/sap/bc/bsp/sap/crm_ui_frame/BSPWDApplication.do was not called due to an error.
Note
The following error text was processed in the system CS1 : Exception condition "CONFIG_NOT_FOUND" raised.
The error occurred on the application server uapkb2dc_CS1_28 and in the work process 1 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: IF_BSP_DLC_CONFIGURATION~GET_CONFIG_DATA of program CL_BSP_DLC_CONFIGURATION2=====CP
Method: GET_XML of program CL_CHTMLB_CONFIG==============CP
Method: IF_BSP_ELEMENT~DO_AT_BEGINNING of program CL_CHTMLB_CONFIG==============CP
Method: ONLAYOUT of program CLO247JT6QHPYQHQ33T513E8SHV84CP
Method: %_ONLAYOUT of program CL_O247JT6QHPYQHQ33T513E8SHV84CP
Method: DO_REQUEST of program CL_BSP_PAGE===================CP
Method: CALL_VIEW of program CL_BSP_PAGE_BASE==============CP
Method: CALL_VIEW of program CL_BSP_CONTROLLER=============CP
Method: PROCESS_VIEW of program CL_BSP_WD_VIEW_CONTROLLER=====CP
Method: DO_REQUEST of program CL_BSP_WD_VIEW_CONTROLLER=====CP
I am not able to find the solution on this & i would appreciate of someone can help me fixing this.
What i did is, I tried to add certain fields from "Configure Page Button" & added certain fields to right column. Since then, i am getting this error. I do not how to remove those.Hi,
Go to transaction BSP_WB_CMPWB and open the compoenent BT111H_OPPT.
Select the view you have modified and click on configuration tab. click on edit and select the custom config
you have created.either you can remove the entries you have added which caused the dump or if you are not sure delete the
custom configuration.This should fix the issue.
Thanks,
Rajiv. -
I wrote a function.This read codes from a .txt file, create an abap program dinamically and after run it.
I wrote a java program with jco and i wrote an abap program for calling function .İf i runned abap program not happened any problem.But i runned java program.i saw this error :
RFC_ERROR_SYSTEM_FAILURE: Exception condition "CNTL_ERROR" raised.
My function :
FUNCTION Z_MS_FUNC2.
*"*"Local Interface:
*" IMPORTING
*" EXPORTING
*" VALUE(RESULT) TYPE ZMS_SONUC-SONUC
DATA: code TYPE TABLE OF rssource-line.
data : p_file TYPE string.
p_file = 'C:\deneme.txt'.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = p_file
FILETYPE = 'ASC'
tables
data_tab = code.
INSERT REPORT 'zms_dinamik002' FROM code.
SUBMIT zms_dinamik002 AND RETURN.
result = 'Successfull.'.
ENDFUNCTION.
this code show error row :
38 CALL METHOD CL_GUI_FRONTEND_SERVICES=>DIRECTORY_LIST_FILES
39 EXPORTING
40 DIRECTORY = FILE
41 FILTER = ''
42 FILES_ONLY = 'X'
43 * DIRECTORIES_ONLY = 'X'
44 CHANGING
45 FILE_TABLE = filetab
46 COUNT = count
47 EXCEPTIONS
48 CNTL_ERROR = 1
49 DIRECTORY_LIST_FILES_FAILED = 2
50 WRONG_PARAMETER = 3
51 ERROR_NO_GUI = 4
52 others = 5.
53
54 IF SY-SUBRC <> 0.
>>>>> RAISE CNTL_ERROR.
56 ENDIF.
deneme.txt
report mehmet.
data wa like zms0005.
wa-jop_id = 14.
wa-jop_name = 'UZAK4'.
modify zms0005 from wa.Hi,
wa-jop is not defined (data: wa-jop type...)!
Try to insert the coding-lines in a new report. Than make a syntax check.
Regards Mario
Edited by: Mario Müller on Mar 11, 2008 6:47 AM -
Exception condition "CNTL_ERROR WD-abap Smartform to pdf
Hii,
I am using a webdynpro - abap application. I am showing a smartform as a pdf in one on the windows.
When the link in the main window is clicked, a secondary window. Instead of the pdf, I get following exception.Kindly help me understand, where would I be going wrong. Let me know if more details required.
**Exception condition "CNTL_ERROR" raised. **
Form: PBO_HTML_CONTROL of program SAPLSTXBC
Module: HTML_CONTROL of program SAPLSTXBC
Function: SSFCOMP_PDF_PREVIEW of program SAPLSTXBC
Method: DISPLAYPDF of program /1BCWDY/2TKFRFPNZA4CZYBGEB8F==CP
Method: IF_COMPONENTCONTROLLER~DISPLAYPDF of program /1BCWDY/2TKFRFPNZA4CZYBGEB8F==CP
Method: ONACTIONPDF of program /1BCWDY/2TKFRFPNZA4CZYBGEB8F==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/2TKFRFPNZA4CZYBGEB8F==CP
Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_VIEW========CP
Method: IF_WDR_ACTION~FIRE of program CL_WDR_ACTION=================CP
Method: DO_HANDLE_ACTION_EVENT of program CL_WDR_WINDOW_PHASE_MODEL=====CP
The code in the DISPLAYPDF method is as follows:
method DISPLAYPDF .
DATA: I_RS38L_FNAM TYPE RS38L_FNAM.
DATA: CTRL TYPE SSFCTRLOP.
DATA: OUT TYPE SSFCOMPOP.
DATA: I_SSFCRESCL TYPE SSFCRESCL.
DATA: LT_OTFDATA TYPE TABLE OF ITCOO.
CTRL-GETOTF = 'X'.
CTRL-NO_DIALOG = 'X'.
CTRL-PREVIEW = 'X'.
OUT-TDNEWID = 'X'.
OUT-TDDELETE = ' '.
data: i_tsp03 type tsp03.
clear i_tsp03.
select single * from tsp03 into i_tsp03.
*OUT-TDDEST = i_tsp03-PADEST.
OUT-TDDEST = 'TEP1'.
********get context data
DATA lo_nd_zwebquestionaire TYPE REF TO if_wd_context_node.
DATA lo_el_zwebquestionaire TYPE REF TO if_wd_context_element.
DATA ls_zwebquestionaire TYPE wd_this->element_zwebquestionaire.
* navigate from <CONTEXT> to <ZWEBQUESTIONAIRE> via lead selection
lo_nd_zwebquestionaire = wd_context->get_child_node( name = wd_this->wdctx_zwebquestionaire ).
* get element via lead selection
lo_el_zwebquestionaire = lo_nd_zwebquestionaire->get_element( ).
* get all declared attributes
lo_el_zwebquestionaire->get_static_attributes(
IMPORTING
static_attributes = ls_zwebquestionaire ).
********get context data ends
data: itab1 type TCHAR255.
data: itab2 type TCHAR255.
data: itab type zprint. "addition by chandani
data fm_name type rs38l_fnam..
clear fm_name.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = 'ZCPESMARTFORM'
IMPORTING
FM_NAME = fm_name
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
CALL FUNCTION fm_name
EXPORTING
* ARCHIVE_INDEX =
* ARCHIVE_INDEX_TAB =
* ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS = CTRL
* MAIL_APPL_OBJ =
* MAIL_RECIPIENT =
* MAIL_SENDER =
OUTPUT_OPTIONS = OUT
USER_SETTINGS = ' '
NAME = 'test'
ZWEBQUESTIONAIRE = ls_ZWEBQUESTIONAIRE
IMPORTING
* DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO = I_SSFCRESCL
* JOB_OUTPUT_OPTIONS =
TABLES "addition by chandani
itab = itab "addition by chandani
* EXCEPTIONS
* FORMATTING_ERROR = 1
* INTERNAL_ERROR = 2
* SEND_ERROR = 3
* USER_CANCELED = 4
* OTHERS = 5
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
REFRESH LT_OTFDATA.
LT_OTFDATA[] = I_SSFCRESCL-OTFDATA[].
CALL FUNCTION 'SSFCOMP_PDF_PREVIEW'
EXPORTING
I_OTF = LT_OTFDATA
* EXCEPTIONS
* CONVERT_OTF_TO_PDF_ERROR = 1
* CNTL_ERROR = 2
* OTHERS = 3
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
DATA: PDF_DATA TYPE XSTRING,
PDF_SIZE TYPE I.
DATA: L_DUMMY TYPE STANDARD TABLE OF TLINE.
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
FORMAT = 'PDF'
* MAX_LINEWIDTH = 132
* ARCHIVE_INDEX = ' '
* COPYNUMBER = 0
* ASCII_BIDI_VIS2LOG = ' '
* PDF_DELETE_OTFTAB = ' '
IMPORTING
BIN_FILESIZE = PDF_SIZE
BIN_FILE = PDF_DATA
TABLES
OTF = LT_OTFDATA
LINES = L_DUMMY
* EXCEPTIONS
* ERR_MAX_LINEWIDTH = 1
* ERR_FORMAT = 2
* ERR_CONV_NOT_POSSIBLE = 3
* ERR_BAD_OTF = 4
* OTHERS = 5
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
DATA lo_nd_pdf TYPE REF TO if_wd_context_node.
DATA lo_el_pdf TYPE REF TO if_wd_context_element.
DATA ls_pdf TYPE wd_this->element_pdf.
DATA lv_sources LIKE ls_pdf-sources.
* navigate from <CONTEXT> to <PDF> via lead selection
lo_nd_pdf = wd_context->get_child_node( name = wd_this->wdctx_pdf ).
* get element via lead selection
lo_el_pdf = lo_nd_pdf->get_element( ).
* get single attribute
lo_el_pdf->Set_attribute(
EXPORTING
name = `SOURCES`
value = PDF_DATA ).
endmethod.Use - with gui_download
call method cl_gui_frontend_services=>environment_get_variable
exporting
variable = p_envir_name
changing
value = ls_envir_path
exceptions
cntl_error = 1
error_no_gui = 2
others = 3.
call method cl_gui_cfw=>flush
exceptions
cntl_system_error = 1
cntl_error = 2
others = 3.
And refer the below notes: 972762
ITS 620 Patch 23 and SAPKB62061
ITS 640 Kernel Patch 148 and SAPKB64019
ITS 700 Kernel Patch 77 and SAPKB70010
and also refer the link below to get more info
http://www.sapfans.com/forums/viewtopic.php?f=13&t=325628&start=15
thanx
suriya -
Regarding Exception condition "CONFIG_NOT_FOUND" raised - while logging
Hi,
Could you please any one help me out.
When ever I login into the CRM Web UI with any of the Sales Manager Roles(SALESPRO or any ZRole that has been copied from SALESPRO) I get below error / exception:
The URL http://testinstsin1.sapcrmondemand.com:/sap/bc/bsp/sap/crm_ui_frame/BSPWDApplication.do was not called due to an error.
The following error text was processed in the system TRG : Exception condition "CONFIG_NOT_FOUND" raised.
The error occurred on the application server SGPSAROU01_TRG_00 and in the work process 1 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: IF_BSP_DLC_CONFIGURATION~GET_CONFIG_DATA of program CL_BSP_DLC_CONFIGURATION2=====CP
Method: LOAD_CRITERIA_ADVANCED_SEARCH of program CL_CRM_CENTRAL_SEARCH=========CP
Method: LOAD of program CL_CRM_CENTRAL_SEARCH=========CP
Method: CONSTRUCTOR of program CL_CRM_CENTRAL_SEARCH=========CP
Method: GET_SEARCH_OBJECTS_AS_TABLE of program CL_CRM_CENTRAL_SEARCH=========CP
Method: DO_INIT of program CL_CRM_CNTR_LAUNCHER_IMPL=====CP
Method: DO_INIT of program CL_BSP_CTRL_ADAPTER===========CP
Method: CREATE_PAGE of program CL_BSP_PAGE_BASE==============CP
I am able to successfully login into the CRM WebUI with other roles. The problem is only with SALESPRO and ZRoles copied from SALESPRO.
Regards,
RajanandOh... Sorry my last message was posted wrongly.
Please have a look at the class where this error happens and set a breakpoint to enter on debug mode and try to find the Role cofig Key, the Component usage, the object type and the object subtype for which the system is looking for a screen configuration.
You must have deleted some screen configuration for your initial page on this roles, that is leadig to this problem.
Regards. -
Exception condition "OPR_NOT_FOUND" raised, in CO02
Hi all,
We faced Runtime Errors RAISE_EXCEPTION
Short text : Exception condition u201COPR_NOT_FOUNDu201D raised.
When technical person checked he come up reason is entries field of table RESB-COUNTER is greater than entry of table AFVC-COUNTER
We come across below SAP note which provide report to rectify above mention inconsistence in tables
Link :[https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=182011]
After running this it rectify the inconsistence ,But we are unable to find root cause why this inconsistence is being generated.
We are on SAP ECC 6.0, I tried to search relevant Note but didnu2019t find any, so if someone faced same in past please share your experience also suggest possible cause of generation of this inconsistence.
want to add we are using Exit for component allocation , which is doing allocations based on custom logic.
but i checked it activating as well as by deactivating it , in both cases facing same error.
Thanks
RiteshHello
The following notes are the most recent corrections for program error which can cause this issue on production orders:
1541774 Reading master data: RAISE_EXCEPTION: OPR_NOT_FOUND
1364818 Exception condition "OPR_NOT_FOUND" raised.
Best regards
Caetano Almeida -
Dear all,
I've created out BI system in our new Portal installation and tested the connection. Everything works fine. I added the certificate of the portal to STRUSTSSO2 in BI ABAP and assigned SAP_ALL and SAP_NEW to my Account.in BI. If I open the iView from the portal I get a BSP Exception with the message:
The used connection by the iView is to the ABAP-Stack of the BI-system not to the JAVA-Stack. Is that correct?
BSP Exception: Der Zugriff auf die URL /irj/servlet/prt/portal/prtroot/com.sap.ip.bi.web.portal.integration.launcher;jsessionid=IDBYatWIpt_pX4uc52ChoZqMWkm1RAFW2qsA_SAP ist untersagt.
What can be the problem/reason?
Thanks!Hi Gerrit
In both places you have to provide a authorization access to the end users then only it will work. because your are already said that in SAP_All & SAP_New working fine
Back end BI system access as per the word document as pasted the link
https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=7&cad=rja&uact=8&ved=0CFIQFjAG&url=http%3A%2F%2Fbasisdsp.f…
For SAP portal you have to create iview's assign the same to end user
Assigning an Authentication Scheme to an iView - User Authentication and Single Sign-On - SAP Library
Portal Authentication Infrastructure - Configuring the Portal for Initial Use - SAP Library
BR
SS -
Short Dump, Exception condition "NOT_EXIST" raised
Dear Colleagues!
I am having a problem with short dump, I am getting the message Exception condition "NOT_EXIST" raised.
I am trying to load data to ODS with full load and filtering via a DTP.
In the monitoring the load doesn't even get started.
I have already loaded data succesfully in this ODS... But now it doesn't work anymore..
I also tried to replicate and active all the rules and objects again.
And in the source system if I test the extractor it works fine.
I saw an earlier thread on this issue, and it recommended programs ZDMDELTAREPAIR or RSBDELTAREPAIR, but this thread was especially for BW 3.5. We are using 7.0 and have SP10. Are these programs still valid or is there another note for 7.0?
Hope you can help!
Regards Silje
Does anyone have any ideas?
regards, UrosHi again,
I tried RSBDELTAREPAIR and it worked!
Thanks to the forum again!
Silje -
Exception condition "CONVERSION_ERROR" raised.
Hi,
We have been getting short dumps in our production system daily. I was unable to locate the problem by looking at the dump. The dump says that CONVERSION_ERROR raised.
Which application raised this exception? Again no clue on the same. Please find the text of the dump.
Short text
Exception condition "CONVERSION_ERROR" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
A RAISE statement in the program "CL_SWF_CNT_CONTAINER==========CP" raised the
exception
condition "CONVERSION_ERROR".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"RAISE_EXCEPTION" " "
"CL_SWF_CNT_CONTAINER==========CP" or "CL_SWF_CNT_CONTAINER==========CM02J"
"IF_SWF_CNT_CONVERSION~TO_XML"
or
"CL_SWF_CNT_CONTAINER==========CP" "CONVERSION_ERROR"
or
"SAPMSSY1 " "CONVERSION_ERROR"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "zacwtbsrv0
Network address...... "10.27.191.
Operating system..... "Windows NT
Release.............. "5.2"
Hardware type........ "4x AMD64 L
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 9
Shortdump setting.... "full"
Database server... "ZACWTBSRV063"
Database type..... "MSSQL"
Database name..... "EP1"
Database user ID.. "ep1"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Apr 21 2008 00:12:39"
create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version. "SQL_Server_8.00 "
Patch level. 157
Patch text.. " "
Database............. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0"
Memory consumption
Roll.... 16192
EM...... 8379680
Heap.... 0
Page.... 16384
MM Used. 8164576
MM Free. 212256
User and Transaction
Client.............. 100
User................ "WF-BATCH"
Language Key........ "E"
Transaction......... " "
Transactions ID..... "FB565CDDF6D0F1BFA292001E0B5D7336"
Program............. "CL_SWF_CNT_CONTAINER==========CP"
Screen.............. "SAPMSSY1 3004"
Screen Line......... 2
Information on caller of Remote Function Call (RFC):
System.............. "EP1"
Database Release.... 700
Kernel Release...... 700
Connection Type..... 3 (2=R/2, 3=ABAP System, E=Ext., R=Reg. Ext.)
Call Type........... "synchron and transactional (emode 0, imode 0)"
Inbound TID.........." "
Inbound Queue Name..." "
Outbound TID........."0A1BBF4011A4488D408222BD"
Outbound Queue Name.." "
Client.............. 100
User................ "HPRETORIUS"
Transaction......... " "
Call Program........."SAPLERFC"
Function Module..... "ARFC_DEST_SHIP"
Call Destination.... "WORKFLOW_LOCAL_100"
Source Server....... "zacwtbsrv064_EP1_00"
Source IP Address... "10.27.191.64"
Additional information on RFC logon:
Trusted Relationship " "
Logon Return Code... 0
Trusted Return Code. 0
Note: For releases < 4.0, information on the RFC caller are often
only partially available.
Information on where terminated
Termination occurred in the ABAP program "CL_SWF_CNT_CONTAINER==========CP" -
in "IF_SWF_CNT_CONVERSION~TO_XML".
The main program was "SAPMSSY1 ".
In the source code you have the termination point in line 67
of the (Include) program "CL_SWF_CNT_CONTAINER==========CM02J".
Source Code Extract
Line SourceCde
37 lv_xml_table_req = 'X'.
38 ENDIF.
39 IF xml_stream IS REQUESTED.
40 lv_xml_stream_req = 'X'.
41 ENDIF.
42
43 IF use_xslt NE space.
44
45 cl_swf_cnt_conversion_service=>to_xml_xslt(
46 EXPORTING
47 container = me
48 include_null_values = include_null_values
49 include_initial_values = include_initial_values
50 include_change_data = include_change_data
51 include_texts = include_texts
52 include_extension_elements = include_extension_elements
53 save_delta_handling_info = save_delta_handling_info
54 xml_dom_req = lv_xml_dom_req
55 xml_table_req = lv_xml_table_req
56 xml_stream_req = lv_xml_stream_req
57 IMPORTING
58 xml_dom = xml_dom
59 xml_table = xml_table
60 xml_stream = xml_stream
61 xml_rendered_size = xml_rendered_size
62 EXCEPTIONS
63 conversion_error = 1
64 OTHERS = 2
65 ).
66 IF sy-subrc <> 0.
>>>> RAISE conversion_error.
68 ENDIF.
69
70 ELSE.
71
72 cl_swf_cnt_conversion_service=>to_xml_ixml(
73 EXPORTING
74 container = me
75 include_null_values = include_null_values
76 include_initial_values = include_initial_values
77 include_typenames = include_typenames
78 include_change_data = include_change_data
79 include_texts = include_texts
Could you please help me out in resolving this issue?
Is there any need to apply any OSS notes?
Thanks in advance. And reward points will be given for the solution..
Thanks,
Ravikumar.Hi,
U will receive this error when ever it is not possible to achieve runtime conversion.
i.e When u r passing the data from one type variable to another type if the conversion is not defined or not possible u will get this dump. Just analyze the dump in ST22.
Look at this simple example. Here i am trying to assign 101.23 to l_p for which length is not sufficient. So i will get dump. But if u do the same with character variable it will truncate the data.
DATA: l_p(2) TYPE P DECIMALS 2.
l_p = '103.23'.
WRITE l_p.
So check the place where u r getting the dump. It must be some assignment statement.
Hope it gave some idea on ur case.
Thanks,
Vinod. -
Exception condition "FAILED" raised.
My TRM functional consultant has been trying to run end of day processes in the Transaction RKLNACHT but the following dump appears:
Runtime Errors RAISE_EXCEPTION
Date and Time 16.05.2008 10:33:21
Short text
Exception condition "FAILED" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
A RAISE statement in the program "CL_POSITIONSERVICE_TRQ========CP" raised the
exception
condition "FAILED".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"RAISE_EXCEPTION" " "
"CL_POSITIONSERVICE_TRQ========CP" or "CL_POSITIONSERVICE_TRQ========CM00I"
"GET_POSITIONS_BY_DIFF"
or
"CL_POSITIONSERVICE_TRQ========CP" "FAILED"
or
"RKLNACHT " "FAILED"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "tetradev"
Network address...... "192.168.1.81"
Operating system..... "SunOS"
Release.............. "5.9"
Hardware type........ "sun4u"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "tetradev"
Database type..... "ORACLE"
Database name..... "DEV"
Database user ID.. "SAPSR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Aug 31 2006 20:59:23"
create on........ "SunOS 5.9 Generic_117171-13 sun4u"
Database version. "OCI_102 (10.2.0.2.0) "
Patch level. 75
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 700
Operating system..... "SunOS 5.9, SunOS 5.10"
Memory consumption
Roll.... 16192
EM...... 16759392
Heap.... 0
Page.... 180224
MM Used. 10608952
MM Free. 1957592
User and Transaction
Client.............. 300
User................ "DARLINGTON"
Language key........ "E"
Transaction......... "KLNACHT "
Program............. "CL_POSITIONSERVICE_TRQ========CP"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where terminated
Termination occurred in the ABAP program "CL_POSITIONSERVICE_TRQ========CP" -
in "GET_POSITIONS_BY_DIFF".
The main program was "RKLNACHT ".
In the source code you have the termination point in line 37
of the (Include) program "CL_POSITIONSERVICE_TRQ========CM00I".
Source Code Extract
Line SourceCde
7 l_selector TYPE REF TO cl_flow_selector_dif,
8 * workarea for table with positions
9 l_tab_position TYPE trqy_position_obj,
10 l_position TYPE REF TO if_position_trq,
11 l_count type i.
12
13 * initialization
14 CLEAR re_tab_position.
15
16 * Get positions for ranges
17 CALL METHOD ca_pos_identifier_dif=>agent->get_persistent_by_range
18 EXPORTING
19 im_context = trqco_con_trq
20 im_ranges = im_ranges
21 RECEIVING
22 re_identifiers = l_tab_identifier.
23 CHECK NOT l_tab_identifier IS INITIAL.
24
25 LOOP AT l_tab_identifier INTO l_identifier.
26
27 l_selector = l_identifier->derive_selector( ).
28
29 * get TRQ positions for selectors
30 CALL METHOD read_positions_by_selector
31 EXPORTING
32 im_selector = l_selector
33 RECEIVING
34 re_tab_positions = l_tab_position.
35 DESCRIBE TABLE l_tab_position LINES l_count.
36 IF l_count <> 1.
>>>>> raise failed.
38 ENDIF.
39 APPEND LINES OF l_tab_position TO re_tab_position.
40 ENDLOOP.
41
42 ENDMETHOD.
Contents of system fields
Name Val.
SY-SUBRC 0
SY-INDEX 0
SY-TABIX 2
SY-DBCNT 1
SY-FDPOS 0
SY-LSIND 0
SY-PAGNO 0
SY-LINNO 1
SY-COLNO 1
SY-PFKEY
SY-UCOMM
SY-TITLE End-of-Day Processing
SY-MSGTY E
SY-MSGID 64
SY-MSGNO 030
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO 0
SY-DATUM 20080516
SY-UZEIT 103319
SY-XPROG SAPLSBAL_DB
SY-XFORM %_CONTROL_EXIT_DYNPRO
Does anyone have suggestions as to how I can solve this problem?
Assistance will be appreciated.bumping...any suggestions...welcome
-
Exception condition "INTERNAL_ERROR" raised
Runtime Errors RAISE_EXCEPTION
Date and Time 21.08.2014 21:53:43
What happened?
The current ABAP/4 program encountered an unexpected
situation.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
A RAISE statement in the program "SAPLCEI0" raised the exception
condition "INTERNAL_ERROR".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"RAISE_EXCEPTION" " "
"SAPLCEI0" or "LCEI0U30"
"VC_I_GET_CONFIGURATION"
or
"SAPLCEI0" "INTERNAL_ERROR"
or
"SAPMSSY1 " "INTERNAL_ERROR"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "sap01717"
Network address...... "10.61.89.105"
Operating system..... "Linux"
Release.............. "2.6.40-0.8-default"
Hardware type........ "x86_64"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 15
Shortdump setting.... "full"
Database server... "sap01716"
Database type..... "ORACLE"
Database name..... "QWT"
Database user ID.. "SAPDAT"
Terminal................. "10.61.31.114"
Char.set.... "C"
SAP kernel....... 720
created (date)... "Mar 17 2013 18:46:25"
create on........ "Linux GNU SLES-11 x86_64 cc4.3.4 use-pr121116"
Database version. "OCI_102, 11.2.0.3.0, V1, default"
Patch level. 420
Patch text.. " "
Database............. "ORACLE 10.1.0.*.*, ORACLE 10.2.0.*.*, ORACLE 11.2.*.*.*"
SAP database version. 720
Operating system..... "Linux 2.6, Linux 3"
Memory consumption
Roll.... 0
EM...... 16759232
Heap.... 0
Page.... 16384
MM Used. 14978448
MM Free. 1777544
User and Transaction
Client.............. 500
User................ "RFC_TAULIA"
Language Key........ "E"
Transaction......... " "
Transactions ID..... "53F6515E320E5BBBE10000000A3D5969"
Program............. "SAPLCEI0"
Screen.............. "SAPMSSY1 3004"
Screen Line......... 2
Information on caller of Remote Function Call (RFC):
System.............. "########"
Database Release.... 720
Kernel Release...... 720
Connection Type..... "E" (2=R/2, 3=ABAP System, E=Ext., R=Reg. Ext.)
Call Type........... "synchronous and non-transactional (emode 0, imode 0)"
Inbound TID.........." "
Inbound Queue Name..." "
Outbound TID........." "
Outbound Queue Name.." "
Client.............. "###"
User................ "############"
Transaction......... " "
Call Program........."SAPJCo30"
Function Module..... "/TAULIA/CT_RFC_BUS_DOC_GET"
Call Destination.... "SAPR3"
Source Server....... "SWDETDOLPHPODD"
Source IP Address... "10.61.31.114"
Additional information on RFC logon:
Trusted Relationship " "
Logon Return Code... 0
Trusted Return Code. 0
Note: For releases < 4.0, information on the RFC caller are often
only partially available.
Information on where terminated
Termination occurred in the ABAP program "SAPLCEI0" - in
"VC_I_GET_CONFIGURATION".
The main program was "SAPMSSY1 ".
In the source code you have the termination point in line 259
of the (Include) program "LCEI0U30".Hi Arun,
the exception INTERNAL_ERROR of function module VC_I_GET_CONFIGURATION hasn't been caught, which leads to a short dump.
Check, where INTERNAL_ERROR is raised in your system In our system the only remaining code is after call of function module CUCQ_GET_CONFIGURATION_PARAMS.
Please try to debug, why this exception is raised.
Regards,
Klaus
Maybe you are looking for
-
Windows 8.1 Pro WMC, Radeon R290X and ASUS VG248qe, cable advisor fails
I ran cable adviser and for my graphics section it fails. The result is: Memory: Pass Processor: Pass Graphics: Fail Your graphics card or driver doesn't support content protection It used to work under windows 7 but what I changed since th
-
How do I save my pages documents from icloud onto my iMac?
I just purchased my first mac. I have an iphone and ipad however, so I have lots of pages documents. When I open pages i have two tabs, iCloud and On My Mac. How do i get all of my folders and files from the one to the other? thanks for your help!
-
BPS Retraction for cost center accounting
hi guys, When i create sender structure for retraction,need to specify the retraction target(eg UPB_RET_COPS) using drop down to find.But i can't find any value after using drop down button.So i want to know how and where to define the retraction
-
The box in my Photoshop Elements, which shows the size and type of brushes, has shrunk to one unreadable line. How can I expand this box to its original size? I have tried dragging it open but nothing happens and none of the tool boxes appear to give
-
I has set the color space to ProPhoto RGB in both Lightroom and Photoshop. I have also calibrated my monitor. But when I export a photo from Lightroom to Photoshop and edit it there before saving it, the photo in Lightroom is very different than what