CL_RSBK_DTP----CP Error while installing BI content
Hi,
iam doing BW(740 SP4) content installation and i select Dataflow before and transferred selection ,after some time it is throwing CL_RSBK_DTP------>CP error .
i searched all earlier documents but of no clue. Pls help us.
Thanks in advance,
Phani
Hi,
If i choose only necessary objects then iam not getting any issue. But i need Dataflow before which covers transformations and DTP's. and this error is showing while doing transfer selections itself hence iam not able to select install methods.
i checked in ST22 but not able to get it and iam not sure , is there any problem with 7.4 .
Pls let me know if u find any solution to it.
Thanks,
Phani
Similar Messages
-
DSO Activation Error - While Installing BI Content
HI Friend,
First, I deleted one sap source systems for BW1 ( My bw1 server BI is : BW1CLNT100 ), later ,I create the same sap source system, But active 0FIAP_O03 ods,
had error:
DataSource 80FIAP_O03 does not exist in source system BW1CLNT100 of version A
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object 0FIAP_O03
I go to BW1CLNT100 datasoucres ,I not finded 80FIAP_O03 datasoucre, But I goto bw prd BI datasoucre, I found 80FIAP_O03 datasoucre.
I think loss 80FIAP_O03 datasoucre for BW1CLNT100 source system, because I am't delete Roules on the 0FIAP_O03 infosoucre for delete sap soucre systems.
DSO Activation Error - While Installing BI Content
this problem no issue, So I create new thread.
Now, How could me create or load 80FIAP_O03 datasoucre for BW1CLNT100 source system?
Now, I Replicate Datascoure for BW1CLNT100 source system, Delete old datasocure....... I go home, I will try tomorrow .Hello,
You should generate the export data source for 0FIAP_O03 again, if there is still a problem please goto
RSA1 > SOURCE SYSTEMS > and right click on the relevant source system, find the datamart application component and
right click on this to replicate the datasource.
Best Regards,
Des -
OBJECTS_OBJREF_NOT_ASSIGNED : Error while installing business content
Hi
Error occured while installing business content
ABAP/4 Processor:OBJECTS_OBJREF_NOT_ASSIGNED
Please help me how to resolve the issue
Regards
ASRHi,
Check in SDN... becasue there are n number of resons for that..
/thread/1056689 [original link is broken]
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/erro-in-background-job-abap4-processor-objects_objref_not_assigned-252195
Thanks
Reddy -
Error while installing business content.
Hi Guys,
I am trying to install busineness content for 0BPARTNER. while i am installing i am getting the below error.
InfoObject 0CUST_CLA is used in transfer rules (M) of characteristic 0BPARTNER
Please help me to take the action to correct this error.
thanks in advance
peter bHi,
Please check 0CUST_CLA this infoobject is activated or not if not pls active that.
http://help.sap.com/saphelp_nw70/helpdata/en/a2/2af638350d5654e10000000a11402f/frameset.htm
Regards,
Madhu -
Errors while installing Business Content
Hi,
It is new system, When I am trying to install any Infocube it has given Runtime error OBJECTS_OBJREF_NOT_ASSIGNED. Then implemented the SAP note 1019055.
To Install Business Content I am following: Grouping: In Data flow before and After wards, Collection Mode- Collect Automatically, Source System Assignment and Install .
Now when I am trying to install I am getting these errors
Process LOADING, variant 0PAK_0U36G4BPCOA4BN43PFVZU3A97 has been saved in target system under name1
Process LOADING, variant 0PAK_0AWN44OD08M313H1SIIA96HT7 has been saved in target system under name 1
Process variant LOADING 0PAK_0AWN44OD08M313H1SIIA96HT7 does not exist in version A
A type "Attribute Change Run" process has to follow process "Execute InfoPackage" var.0PAK_0AWN44OD08M313H1SIIA96HT7 in the chain
A type "Data Transfer Process" process has to follow process "Execute InfoPackage" var.0PAK_0AWN44OD08M313H1SIIA96HT7 in the chain
Process variant LOADING 0PAK_0MPC1AWCV7TGZ1CJ843SRIJZD does not exist in version A
InfoPackage no longer exists in object version A in table RSLDPIO
Variant '0PAK_1909HG1UYCGTBUE171UNQCSDN' of process type 'LOADING' not found in A version
InfoPackage no longer exists in object version A in table RSLDPIO
There many errors of this type.
How to solve the problem. Please help me.
Thanks in advance.
JaswanthaHi Jaswantha,
Installing Business Content Cube would usually require "Grouping" as "Select In Data Flow Before".
This is as per my observations so far according to SAP Best Practices.
Pls. try this and get back.
Hope it helps
Regards
PPMM -
Error while installing Business Content SD Cubes
Hello BW Guru's,
I am installing the business content for the sales overview infocube with the grouping option data flow before & later sometime it says that backgorund programm was been modified.
I checked it in st22 its showing an dump with the status msg LOAD_PROGRAM_LOST error.
What could be the problem? how to resolve this issue?
Please through some inputs on this issue....
Points Asssured.
Urs,
RK.Hi,
The LOAD_PROGRAM_LOST error occurs when there are two
or more versions of a given program loaded into the buffer at any given time. This happens when the program is changed by one user while it is still in use by another user.
When a user gets to the program that is having this problem and R/3 attempts to load the generated version from the buffer, it sees that the version is not the most current and tries to swap it out for the most current, but the load was lost from the pxa buffer, hence the dump of LOAD_PROGRAM_LOST.
To correct the error you need to run tranx SAMT & regenerate the program(s) that are listed in the dump. You can then do a $SYNC in the OK code field in the affected applciation server, but the other application servers should not be running. After the $SYNC, the other app servers can be brought up and the
buffers should then be in sync.
Hope this helps,
Regards
CSM Reddy -
Error while installing BI content
We are trying to reinstall BI content for 0sd_o01 in dev and transport again to Quality due to some issues.
While doing that we get errors like '0ACT_DL_DTE is not available in version D' and many such info objects and transformations not in D version.
What exactly does it mean and how to resolve it.Hi lavanya,
Make sure the info object 0ACT_DL_DTE is active.
And also check for the info objects are active or not.
You can check for the info objects that are present in the infocube are active or not using the below table.
RSDCUBEIOBJ -Objects per InfoCube (where-used list)
enter the Infocube name and select version =A
After activating all hte inactive objects try to reinstall the content.
Regards
KP -
Error while installing BI Content-2lis_13_vdkon
Hi, Guru's
i have instaled the infosource (2LIS_13_VDKON) (BI 7).Now when i try to assign the respective Datasource to the above Infosource,i get a error messg stating : The Transfer Structure is not getting generated.so i tried again to install the DS from business content and here i get a messg:( Data element for InfoObject VBELN 0BILL_NUM could not be created).
any inputs would be appreciated.
thanks
mohan
(would assign points for sure)Hi Mohan,
Go by the below procedure.
Step-1. Go to transaction RSA-6 and check weather your data source is Active or not.If it is active that is fine otherwise activate it in RSA5.
Step-2. Goto your BW System and replicate the data source and assign the respective infosource.
Step-3. Now Create Transfer rules then update rules for your respective target.
Step-4. Schedule an Infopackage to pull the data to the target.
Hope this helps
Regards,
Karthik.
mail me at: [email protected]
Assign points if helpful -
Source system not Active error while installing BI content cube
Hi.,
When I try to install the BI content cube, In logs it is showing the error message as "Source client not Active". I activated the source system in modelling tab. Still the problem continues. In source system assignment of BI content the source client is also checked. Please give me a solution.Hi Selva,
If you want to select only infocube, select "Only necessary objects" in grouping. If you want everything related to Info cube, then system will collect data source also and for that it will check if you are authorized in source system. Please check if the source system is connected to BI or you can do one thing activate the data source in source system and replicate it in BI.
Regards,
Kams -
HI,
I receive the following error while installing BC
Object 0PURCH_ORG_TEXT CL300 (Transfer Rules,ISMP) could not be collected for object 0PURCH_ORG (InfoObject,IOBJ)
Message no. RSO296
Kly guide us to solve this problem.
Regards,
Babu RYou can find the latest patch in
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/101506be-011d-2a10-75a2-917d931f3d0f
Also
ope you might have seen this already if not
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm
Choose these options
Choose following options
Collect the Objects:Automatically
Grouping: Select only necessary objects
Install: Install
RSA1-> Business Contents-> Select your objects-> On the right hand side, select "automatic collection" under "collection mode" and Select "before and after data flow" -> Right Click the selected objects on the left hand side and right click -> Insert Objects for collection-> Once the selected objects comes to the right hand side, select "install" and click "install in background".
See this also....
http://help.sap.com/saphelp_nw04/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/content.htm
This is installing for version 7.0 :
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/content.htm
If the info object is not assigned in application component, it will installed in unassigned node.
In AWB click infobject->Unassigned nodes->Unassigned characteristics.
To bring installed InfoObjects into required InfoObject catalogue, double click on the InfoObject catalogue and in the next screen select your InfoObject in the right side, move it to left side through arrow. Then activate the InfoObject catalogue. You would be able to see your InfoObjects.
Hope it helps
Regards
Bala -
Error while installing Sneak preview Netweaver 2004 --SP15 on WindowsXP+SP1
hi, i'm getting a error while installing the Sneak preview NetWeaver 2004-SP15 on Windows XP + SP1.
error message: Corrupt GZip trailer
JDK version: 1.4.2_08 and 1.4.2_09
i searched this error on google and i found it's a bug of jdk1.4.2_08.(see this page:<a href="http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=4262583">http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=4262583</a>) it said this version can't run when the uncompressed file is 2GB or larger. and this bug was fixed after <b>jdk1.5</b>. but i noted that Sneak preview was not tested on jdk1.5.Ignore it, i uninstalled jdk1.4.2_08 and Sneak preview,then i installed jdk1.5 and reinstalled Sneak preview.Unfortunated, i got another error.The error code is <b>3018</b>.
could anyone please help me?
Regards
boI faced this problem while I was installation.
Following are my installation's step, is there any problem?
1.I have a new system just for installation, it is WindowsXP + SP1(2.5G memory and 2 CPU);
2.download JDk 1.4.2_09 from sun.com and installed it;
3.download Sneak preview Netweaver2004SP15 from sdn.sap.com. There are 3 files total.
Two are NW04SneakPreviewSP15.rar, the other is DeveloperStudioSP15.rar;
4.uncompressed NW04SneakPreviewSP15.rar. I used winrar, it's OK.
5.start install NW04SneakPreviewSP15.rar step by step according to the installation guid.
6.to this step 'SAP J2EE Engine Server Core', all are right;
7.error in the step 'Load Java Database Content';
Following are part of the log file 'jload.java.log':
java version "1.4.2_09"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_09-b05)
Java HotSpot(TM) Client VM (build 1.4.2_09-b05, mixed mode)
2006-3-22 18:26:37 com.sap.inst.jload.Jload main
ÐÅÏ¢: Jload -sec J2E,jdbc/pool/J2E,C:usrsapJ2ESYSglobal/security/data/SecStore.properties,C:usrsapJ2ESYSglobal/security/data/SecStore.key -dataDir C:/backup/NW04SneakPreviewSP15/NWSneakPreviewSP15/SAP_NetWeaver_04_SR_1_Installation_MasterIM01_NT_I386....SneakPreviewContentJDMP -job C:Program Filessapinst_instdirNW04SR1WEBAS_COPYONE_HOST/IMPORT.XML -log C:Program Filessapinst_instdirNW04SR1WEBAS_COPYONE_HOST/jload.log
2006-3-22 18:26:40 com.sap.inst.jload.db.DBConnection connectViaSecureStore
ÐÅÏ¢: connected to J2E on jdbc/pool/J2E
2006-3-22 18:26:41 com.sap.inst.jload.JobStatus readStatus
ÐÅÏ¢: trying to read status file C:usrsapJ2EJC00j2eesltoolsIMPORT.sta
2006-3-22 18:26:41 com.sap.inst.jload.JobStatus readStatus
ÐÅÏ¢: status file IMPORT.sta doesn't exist - no restart
2006-3-22 18:26:41 com.sap.inst.jload.Jload dbImport
ÐÅÏ¢: trying to create table ADS_LICENSED_FORMS
2006-3-22 18:26:42 com.sap.inst.jload.Jload dbImport
ÐÅÏ¢: table ADS_LICENSED_FORMS created
2006-3-22 18:26:42 com.sap.inst.jload.Jload dbImport
ÐÅÏ¢: ADS_LICENSED_FORMS loaded (2 rows)
2006-3-22 18:48:58 com.sap.inst.jload.Jload dbImport
ÐÅÏ¢: trying to create table J2EE_CONFIGENTRY
2006-3-22 18:48:58 com.sap.inst.jload.Jload dbImport
ÐÅÏ¢: table J2EE_CONFIGENTRY created
2006-3-22 19:07:53 com.sap.inst.jload.Jload logStackTrace
ÑÏÖØ: java.io.IOException: Corrupt GZIP trailer
at java.util.zip.GZIPInputStream.readTrailer(GZIPInputStream.java:174)
at java.util.zip.GZIPInputStream.read(GZIPInputStream.java:89)
at java.util.zip.InflaterInputStream.read(InflaterInputStream.java:105)
at java.io.DataInputStream.readBoolean(DataInputStream.java:310)
at com.sap.inst.jload.db.FieldHandler.checkAndSetNullValue(FieldHandler.java:46)
at com.sap.inst.jload.db.BigIntHandler.setValue(TinyIntHandler.java:164)
at com.sap.inst.jload.db.DBTable.load(DBTable.java:274)
at com.sap.inst.jload.Jload.dbImport(Jload.java:323)
at com.sap.inst.jload.Jload.executeJob(Jload.java:397)
at com.sap.inst.jload.Jload.main(Jload.java:621)
2006-3-22 19:07:53 com.sap.inst.jload.db.DBConnection disconnect
ÐÅÏ¢: disconnected
I also tried jdk1.4.2_08 and I also installed in Windows2000+SP4. But I faced the same problem too.
From sun.com, I know this error is a bug of jdk. They explained that this version can't run OK
when zip-file is larger than 2G. Then I found here's a file
(name is 'NW04SneakPreviewSP15NWSneakPreviewSP15SneakPreviewContentSDMSDMKIT.JAR'). It's size
is 2.08G. I suppose installation can't manage it.
I tried unzip this file and renamed unziped folder to 'SDMKIT.JAR'.
Then I found another large file in the unziped folder(name is 'F:NW04SneakPreviewSP15NWSneakPreviewSP15SneakPreviewContentSDMSDMKIT.JARpackpackedRoot.jar')
, so I also unzip this file and renamed unziped folder to 'packedRoot.jar'.
Then I reinstalled, of course, It's no work.
Unexpectedly, I found this download link is not available on the sdn.sap.com(see this page:https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/cfc19866-0401-0010-35b2-dc8158247fb6).
It say that 'We apologize that this version is currently not available to download.'.
I guess there are any problem in this version, are there?
So, now I think I must download another version to install.
Thanks,
Bo
Message was edited by: bo zeng -
Error while Installing R12.1.1 on Windows 2003
Dear all,
i have error while Installing ebs on stage 3-5
log file here : http://www.mediafire.com/download/fc91007a6rcaj09/ebslog.rar
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed RC-50004: Fatal: Error occurred in ApplyAppsTechStack:
RC-50013: Fatal: Failed to instantiate driver C:\oracle\VIS\apps\tech_st\10.1.3\appsutil\driver\regclone.drv
C:\DOCUME~1\EBS\LOCALS~1\Temp>if 1 == 0 goto :REG_OK
C:\DOCUME~1\EBS\LOCALS~1\Temp>echo Cannot execute registration of Applications Techstack
Cannot execute registration of Applications Techstack
C:\DOCUME~1\EBS\LOCALS~1\Temp>if "" == "TRUE" goto :INSIAS_OK
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running APPL_TOP Install Driver for VIS instancelog file
Processing DriverFile = Z:\D\Oracle\OracleR12\StageR12\startCD\Disk1\rapidwiz\template\adriapps.drv
Running Instantiation Drivers for Z:\D\Oracle\OracleR12\StageR12\startCD\Disk1\rapidwiz\template\adriapps.drv
instantiate file:
source : Z:\D\Oracle\OracleR12\StageR12\startCD\Disk1\rapidwiz\template\adrunias.cmd
dest : C:\oracle\VIS\inst\apps\VIS_omar\temp\adrunias.cmd
backup : C:\oracle\VIS\inst\apps\VIS_omar\temp\adrunias.cmd to C:\oracle\VIS\apps\apps_st\appl\admin\VIS_omar\out\templbac\adrunias.cmd
instantiate file:
source : Z:\D\Oracle\OracleR12\StageR12\startCD\Disk1\rapidwiz\template\adrunat.cmd
dest : C:\oracle\VIS\inst\apps\VIS_omar\temp\adrunat.cmd
backup : C:\oracle\VIS\inst\apps\VIS_omar\temp\adrunat.cmd to C:\oracle\VIS\apps\apps_st\appl\admin\VIS_omar\out\templbac\adrunat.cmd
Step 0 of 5
Command: C:\oracle\VIS\inst\apps\VIS_omar\temp\adrunias.cmd
Processing Step 3 of 5
Executing: C:\oracle\VIS\inst\apps\VIS_omar\temp\adrunias.cmd
Z:\D\Oracle\OracleR12\StageR12\startCD\Disk1\rapidwiz>REM
Z:\D\Oracle\OracleR12\StageR12\startCD\Disk1\rapidwiz>REM $Header: adrunias.cmd 120.11 2009/01/19 06:29:11 marderiu noship $
Z:\D\Oracle\OracleR12\StageR12\startCD\Disk1\rapidwiz>REM ###############################################################
Z:\D\Oracle\OracleR12\StageR12\startCD\Disk1\rapidwiz>REM
Z:\D\Oracle\OracleR12\StageR12\startCD\Disk1\rapidwiz>REM This file is automatically generated by AutoConfig. It will be read and
Z:\D\Oracle\OracleR12\StageR12\startCD\Disk1\rapidwiz>REM overwritten. If you were instructed to edit this file, or if you are not
Z:\D\Oracle\OracleR12\StageR12\startCD\Disk1\rapidwiz>REM able to use the settings created by AutoConfig, refer to Metalink Note
Z:\D\Oracle\OracleR12\StageR12\startCD\Disk1\rapidwiz>REM 387859.1 for assistance.
Z:\D\Oracle\OracleR12\StageR12\startCD\Disk1\rapidwiz>REM
Z:\D\Oracle\OracleR12\StageR12\startCD\Disk1\rapidwiz>REM ###############################################################
Z:\D\Oracle\OracleR12\StageR12\startCD\Disk1\rapidwiz>REM
Z:\D\Oracle\OracleR12\StageR12\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('DATE /T') DO (set date=%a )
Z:\D\Oracle\OracleR12\StageR12\startCD\Disk1\rapidwiz>(set date=Mon 06/17/2013 )
Z:\D\Oracle\OracleR12\StageR12\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('TIME /T') DO (set time=%a )
Z:\D\Oracle\OracleR12\StageR12\startCD\Disk1\rapidwiz>(set time=04:54 PM )
Z:\D\Oracle\OracleR12\StageR12\startCD\Disk1\rapidwiz>ECHO STARTED INSTALL PHASE : APPS TECH STACK : Mon 06/17/2013 04:54 PM
STARTED INSTALL PHASE : APPS TECH STACK : Mon 06/17/2013 04:54 PM
Z:\D\Oracle\OracleR12\StageR12\startCD\Disk1\rapidwiz>SET JRE_PATH=Z:\D\Oracle\OracleR12\StageR12\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java
Z:\D\Oracle\OracleR12\StageR12\startCD\Disk1\rapidwiz>SET JRE_CP=.;Z:\D\Oracle\OracleR12\StageR12\startCD\Disk1\rapidwiz\jlib\java;Z:\D\Oracle\OracleR12\StageR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;Z:\D\Oracle\OracleR12\StageR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;Z:\D\Oracle\OracleR12\StageR12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;Z:\D\Oracle\OracleR12\StageR12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;Z:\D\Oracle\OracleR12\StageR12\startCD\Disk1\rapidwiz\jlib\oui\share.jar;Z:\D\Oracle\OracleR12\StageR12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar
Z:\D\Oracle\OracleR12\StageR12\startCD\Disk1\rapidwiz>SET XML_FILE=C:\oracle\VIS\inst\apps\VIS_omar\appl\admin\VIS_omar.xml
Z:\D\Oracle\OracleR12\StageR12\startCD\Disk1\rapidwiz>SET PATH=Z:\D\Oracle\OracleR12\StageR12\startCD\Disk1\rapidwiz\unzip\NT;C:\Perl\site\bin;C:\Perl\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\cygwin\bin;C:\MSVS\VC\bin;C:\Perl\bin
Z:\D\Oracle\OracleR12\StageR12\startCD\Disk1\rapidwiz>SET EC=ERRORCODE
Z:\D\Oracle\OracleR12\StageR12\startCD\Disk1\rapidwiz>setlocal enableextensions
Z:\D\Oracle\OracleR12\StageR12\startCD\Disk1\rapidwiz>set /P unpw=""
Z:\D\Oracle\OracleR12\StageR12\startCD\Disk1\rapidwiz>for /F "usebackq tokens=1,2 delims=/" %i in ('APPS/APPS') do set APPSUSER=%i && set APPSPASS=%j
Z:\D\Oracle\OracleR12\StageR12\startCD\Disk1\rapidwiz>set APPSUSER=APPS && set APPSPASS=APPS
Z:\D\Oracle\OracleR12\StageR12\startCD\Disk1\rapidwiz>IF "5" == "1" (SET THREADS=1 ) ELSE (SET THREADS=1 )
Z:\D\Oracle\OracleR12\StageR12\startCD\Disk1\rapidwiz>CD /D C:\DOCUME~1\EBS\LOCALS~1\Temp
C:\DOCUME~1\EBS\LOCALS~1\Temp>if "FALSE" == "C:\oracle\VIS\inst\apps\VIS_omar\temp\adrunias.cmd" (if not "FALSE" == "FALSE" (goto :FALSE ) else (goto :runProcess_1 ) )
C:\DOCUME~1\EBS\LOCALS~1\Temp>echo "runProcess_1"
"runProcess_1"
C:\DOCUME~1\EBS\LOCALS~1\Temp>REM
C:\DOCUME~1\EBS\LOCALS~1\Temp>REM Perform the install for tech stack
C:\DOCUME~1\EBS\LOCALS~1\Temp>REM
C:\DOCUME~1\EBS\LOCALS~1\Temp>echo Statusstring Installing Applications Technology Stack
Statusstring Installing Applications Technology Stack
C:\DOCUME~1\EBS\LOCALS~1\Temp>Z:\D\Oracle\OracleR12\StageR12\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java -mx600M -classpath .;Z:\D\Oracle\OracleR12\StageR12\startCD\Disk1\rapidwiz\jlib\java;Z:\D\Oracle\OracleR12\StageR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;Z:\D\Oracle\OracleR12\StageR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;Z:\D\Oracle\OracleR12\StageR12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;Z:\D\Oracle\OracleR12\StageR12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;Z:\D\Oracle\OracleR12\StageR12\startCD\Disk1\rapidwiz\jlib\oui\share.jar;Z:\D\Oracle\OracleR12\StageR12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar oracle.apps.ad.rapidwiz.util.InstantiateFile -e C:\oracle\VIS\inst\apps\VIS_omar\appl\admin\VIS_omar.xml -d Z:\D\Oracle\OracleR12\StageR12\startCD\Disk1\rapidwiz\driver\appsts\driver\gias.drv -pwd no_password_here -log C:\oracle\VIS\apps\apps_st\appl\admin\VIS_omar\log\ApplyAppsTechStack.log -nthreads 1 -verbose
Enter the location of the CD labeled Oracle Applications Rapid Install - Tools Disk 1 :
Checking Disk contents in - Z:\D\Oracle\OracleR12\StageR12\startCD\Disk1\rapidwiz
Checking Disk contents in - Z:\D\Oracle\OracleR12\StageR12\oraAS\Disk1
Checking Disk contents in - Z:\D\Oracle\OracleR12\StageR12\oraAS\Disk1
Unzip Count:60
Processing Disk1....
Processing Disk2....
Processing Disk3....
C:\DOCUME~1\EBS\LOCALS~1\Temp>if 0 == 0 goto :BITS_OK
C:\DOCUME~1\EBS\LOCALS~1\Temp>echo "runProcess_2"
"runProcess_2"
C:\DOCUME~1\EBS\LOCALS~1\Temp>REM Perform the registration for tech stack
C:\DOCUME~1\EBS\LOCALS~1\Temp>REM
C:\DOCUME~1\EBS\LOCALS~1\Temp>echo Statusstring Registering Applications Technology Stack
Statusstring Registering Applications Technology Stack
C:\DOCUME~1\EBS\LOCALS~1\Temp>(echo APPS & echo APPS ) | Z:\D\Oracle\OracleR12\StageR12\startCD\Disk1\rapidwiz\jre\NT\1.6.0\bin\java -mx512M -classpath .;Z:\D\Oracle\OracleR12\StageR12\startCD\Disk1\rapidwiz\jlib\java;Z:\D\Oracle\OracleR12\StageR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;Z:\D\Oracle\OracleR12\StageR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;Z:\D\Oracle\OracleR12\StageR12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;Z:\D\Oracle\OracleR12\StageR12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;Z:\D\Oracle\OracleR12\StageR12\startCD\Disk1\rapidwiz\jlib\oui\share.jar;Z:\D\Oracle\OracleR12\StageR12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar oracle.apps.ad.clone.ApplyAppsTechStack -e C:\oracle\VIS\inst\apps\VIS_omar\appl\admin\VIS_omar.xml -stage Z:\D\Oracle\OracleR12\StageR12\startCD\Disk1\rapidwiz -showProgress -phase reg -nopromptmsg
Log file located at C:\oracle\VIS\inst\apps\VIS_omar\admin\log\ApplyAppsTechStack_06171702.log
| 0% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
/ 3% completed
- 3% completed
\ 3% completed
| 3% completed
-
hi,
i am getting the folloeing error while installing CU2 patch
my EBS version is 11.5.10 and database version is 9.2.0.5 while OS is HP UX 11.11
Enter the number of parallel workers [2] :
AutoPatch will run in parallel mode.
Did not need to apply new applterr.txt.
Applying new applprod.txt (if any)...
Did not need to apply new applprod.txt.
Performing version checking for driver files...
Log and Info File sync point:
Sat May 31 2008 14:58:18
AutoPatch found some files which it will not apply.
These files are listed in the AutoPatch informational message file.
Copying driver files into installation area...
No driver files were selected for copying.
ForceCopying driver files into installation area...
No driver files were selected for ForceCopying.
Screening out files not valid for this installation...
Determining valid on-site files...
Extracting object modules from product libraries...
aiosp2() Error: failure in usdspn()
Contents of error buffer are:
"usdsop cannot create a new process
Cause: usdsop encountered an error creating a new process. [Reason].
Action: Check that your system had enough resources to start a new process. Contact your system administrator to obtain more
resou (RE"
An error occurred while extracting files from library.
Continue as if it were successful [No] :so its better to use 3460000 earlier i was trying 3480000
It is not a matter of which one is better. If you want to upgrade 11.5.10 (or above) to 11.5.10.2, then you need to apply 11.5.10 CU2 Patch 3460000.
11.5.10.2 Maintenance Pack (i.e. Patch 3480000) should be applied if you upgrade from Oracle Apps 11i release 11.5.9 (or below) to 11.5.10.2 -
Hi
I am installing NW 04 SR1 on Linux / DB2
Completed the steps of ABAP Central instance and Database instance successfully.
While installing the JAVA Add-in, everything seems to go smoothly till step 20 of 26.
In the "load java database content" step, I get an error as follows:
Log file: jload.java.log
exerpts of the error:
12:00:48 2006-05-25 dbs-Error: Exception caught during SQL execution DB2 SQL error: SQLCODE: -622, SQLSTATE: 56031, SQLERRMC: CCSID UNICODE CREATE TABLE .......
May 25, 2006 12:00:45 PM com.sap.inst.jload.Jload main
INFO: Jload -sec XO2,jdbc/pool/XO2,/sapmnt/XO2/global/security/data/SecStore.properties,/sapmnt/XO2/global/security/data/SecStore.key -dataDir /mnt/sapsw/SAP-Linux-IDES-4.7X200-DB2UDB/51030724_2/DVD_NW_04_SR1_SAP_Web_AS_JAVA/J2EE_OSINDEP/J2EE-ENG/JDMP -job /tmp/sapinst_instdir/NW04SR1/WEBAS_JAVA_DB6/ONE_HOST/IMPORT.XML -log /tmp/sapinst_instdir/NW04SR1/WEBAS_JAVA_DB6/ONE_HOST/jload.log
May 25, 2006 12:00:47 PM com.sap.inst.jload.db.DBConnection connectViaSecureStore
INFO: connected to XO2 on jdbc/pool/XO2
May 25, 2006 12:00:47 PM com.sap.inst.jload.JobStatus readStatus
INFO: commencing restart
May 25, 2006 12:00:48 PM com.sap.inst.jload.Jload dbImport
INFO: trying to drop table BC_COMPVERS
May 25, 2006 12:00:48 PM com.sap.inst.jload.Jload dbImport
INFO: table dropped
May 25, 2006 12:00:48 PM com.sap.inst.jload.Jload dbImport
INFO: trying to create table BC_COMPVERS
May 25, 2006 12:00:48 PM com.sap.inst.jload.Jload logStackTrace
SEVERE: com.sap.dictionary.database.dbs.JddException: CREATE TABLE BC_COMPVERS failed
at com.sap.inst.jload.db.DBTable.create(DBTable.java:106)
at com.sap.inst.jload.Jload.dbImport(Jload.java:276)
at com.sap.inst.jload.Jload.executeJob(Jload.java:395)
at com.sap.inst.jload.Jload.main(Jload.java:551)
May 25, 2006 12:00:48 PM com.sap.inst.jload.db.DBConnection disconnect
INFO: disconnected
The SQLCODES and SQLSTATUS mentions that either:
Possible reasons:
CCSID ASCII cannot be specified when connected to a database created using a UNICODE code page.
CCSID UNICODE cannot be specified when connected to a database created using a non-UNICODE code page.
I am installing this for Non-unicode database, so I guess the above SQL statement should not be :
CCSID UNICODE CREATE TABLE
and should be "CCSID ASCII CREATE TABLE"
This statement seems to come from an EXPDUMP1.001 file from an OS independant J2EE engine DVD:
51030724_2 SAP NW04 SR1 SAP J2EE Engine (OS independent parts)
Wonder where I should be looking to go beyond this block.
ThanksHi,
I got the same error while installing NW04 SR1 on AIX. Has anybody a solution for this problem? -
Error while installing web tools.
I am currently trying to install E-Commerce and Web CRM on a Windows Vista desktop PC, that we are going to use as a Demo PC for potential customers. It is just a demo, so everything is being installed locally on the Demo PC. I run into an error while installing the Web Tools
After the Default Install and before I precede to the Advanced install, I browse to - localhost/B1webtools - and rather than load up the webtools license key request page, I am getting the following error.
HTTP Error 404.17 - Not Found
The requested content appears to be script and will not be served by the static file handler.
I didn't run into any errors during the default install, and it appeared to function just right.
Does anyone know what would cause this error???
Server Error in Application "DEFAULT WEB SITE/B1WEBTOOLS"
Internet Information Services 7.0
Error Summary
HTTP Error 404.17 - Not Found
The requested content appears to be script and will not be served by the static file handler.
Detailed Error Information
Module StaticFileModule
Notification ExecuteRequestHandler
Handler StaticFile
Error Code 0x80070032
Requested URL http://localhost/b1webtools/default.aspx
Physical Path C:InetPubwwwrootB1WebToolsdefault.aspx
Logon Method Anonymous
Logon User Anonymous
Most likely causes:
u2022 The request matched a wildcard mime map. The request is mapped to the static file handler. If there were different pre-conditions, the request will map to a different handler.
Things you can try:
u2022 If you want to serve this content as a static file, add an explicit MIME map.
Links and More Information
Sometimes preconditions and a wildcard MIME map can unintentionally cause serving script source.
View more information »
Any help would be much appreciated. ThanksOkay so I changed my Application pool and it solved that error. Now I'm able to get the page that has a link to the request license page, but when I click on that link it gives me this error:
Server Error in '/B1WebTools' Application.
Object reference not set to an instance of an object.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.NullReferenceException: Object reference not set to an instance of an object.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[NullReferenceException: Object reference not set to an instance of an object.]
netpoint.LicenseRequest.Page_Load(Object sender, EventArgs e) +266
System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +14
System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +35
System.Web.UI.Control.OnLoad(EventArgs e) +99
System.Web.UI.Control.LoadRecursive() +50
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +627
Version Information: Microsoft .NET Framework Version:2.0.50727.3074; ASP.NET Version:2.0.50727.3074
I have repeatedly gotten this error on all Windows Vista machines that I try and install webtools on. Does anyone have a good idea on this one?
Maybe you are looking for
-
Hello, I am facing following issue regarding web analytic service for specific date 2014-08-18: Verified following services which are running and status was success on that specific date 2014-08-18 : Web Analytics Service Microsoft Usage Data Import
-
Adobe Reader could not open .img because it is either not a supported file type or the file damaged
-
Hi, Guys: I am struggling to display multiple images one page by clicking button. I implement an PL/SQL stored procedure as follows: CREATE OR REPLACE PROCEDURE Sor_Display_Current_Image(p_n_Offender_id IN NUMBER, p_n_image_Count in number) AS v_mime
-
Combining same matnr with AT new
Hi, I have one internal table as IT_RESB table contain data as below RSNUM MATNR BDMNG ENMNG BAUGR 3212100 716 45 30 4110 3212100 786
-
Files not visible after Time Machine restoring
Hi, I've had some problems with my Mac and decided to format the hard drive. After the formatting I tried to restore some of the older folders from the Time Machine backup disk. The program copied them onto the harddrive without any problems and when