CL_RSPLS_CR_CONTROLLER method inner join short dump
Hi guys,
i have characteristic relationship usage but i created a new concept for characteristic combinations creation. We have one table with all characteristics are maintained We want to use one single table to maintain all relations. The class created with the create method implemented is working and we do have the right entries in table c_th_chas. This table then goes into standard coding and is transformed. Afterwards method complete_combis is executed and within this method there is the method INNER_JOIN_steps. There method INNER_JOIN is executed. And this is thge method which dumps because method INNER_JOIN has a part beggining with the comment intersection of characteristics is empty, so build the cart.product.. From 13 characetristics in the table 6 are filled and 7 are empty . Maybe 8 times i am able to to run the loop but then the values of the tables is increasing immensly and a short time is thrown with no more internal table space... --> no more memory.
The problem seems to be the empty characetristics and the building of the cart. product. The command
INSERTc_s_chas INTO TABLE e_th_chas.
is to much for over 10 Mio records and a short dump is thrown.
Is there any workaround for this problem? Can someone give me a hint.
Thanks and regards,
Murat
Hi Gregor,
thank you for your very helpful answer. With ticking this flag no automatic combinations were created and the wished characetristic relations were displayed. But after ticking this flag other workbooks crashed of invalid combinations which worked fine before witout the characteristic relationship class activation. The issue is as following:
i have a lot of characteristics in the realtime planning cube. My intention was to make one big table with most of the characteristics in it to build characteristic relations. At the moment we do have some tables and maintaining them gets komplex. One table i for all is the target.We have workbooks where we dont want use characteristic relations so we have a characetristic embedded in constant selections (structure) in the query and other characteristics with Access Type for Result Values in Master Data and Filter Value Selection Durinbg Query Execution with Values in Master data Table. For these workbooks i dont want characteristic relationships but we also have the opposite queries with characetreistics with ACCESS Type for Result Values with CHARACTERISTIC RELATIONSHIP and Filter value Selection During Query execution with CHARACTERISTIC RELATIONSHIP. In these workbooks i want to use characetristic relationships and the table in the others not. Now the wueries where i want to use CRRs are correct but at the other workbooks also the table and CRR class is executed but i dont want them to get restricted by CRRS and also there is no characetristic using ACCESS Type for Result Values with CHARACTERISTIC RELATIONSHIP and also Filter value Selection During Query execution with CHARACTERISTIC Relationdships.
But despite why is CRR class executed. How can i solve it?
I would appreciate if you or someone could suggest me something here.
Thanks and kind regards,
Murat
Similar Messages
-
CL_GUI_CFW= FLUSH giving short dump
hi,
i have got two servers. one for development and other for quality. in development my CL_GUI_CFW=>FLUSH is working fine, but when i try to execute my prog in quality "flush method" is giving short dump, its returning sy-subrc <> 0.
can anybody suggest possible causes of the same.
The server status are all the same for quality as well as development.
thanks
pratyushHello Pratyush
You may want to have a look at my sample report ZUS_SDN_TWO_ALV_GRIDS_3 in thread
[how to refresh the contents of a grid?|how to refresh the contents of a grid?;.
Most control events do not trigger PAI of the dynpro. Thus, they behave similar like calling a search help or F1 help.
The automatic flushing which occurs at PBO is done the following way:
METHOD handle_user_command.
* define local data
DATA:
ls_row TYPE lvc_s_row,
ls_knb1 TYPE knb1.
CHECK ( sender = go_grid1 ).
CHECK ( e_ucomm = 'SAVE' ).
CALL METHOD go_grid1->get_current_cell
IMPORTING
es_row_id = ls_row.
READ TABLE gt_knb1 INTO ls_knb1 INDEX ls_row-index.
CHECK ( ls_knb1-kunnr IS NOT INITIAL ).
PERFORM entry_show_details.
* Triggers PAI of the dynpro with the specified ok-code
" CALL METHOD cl_gui_cfw=>set_new_ok_code( 'DETAIL' ). " not on 4.6c
CALL METHOD cl_gui_cfw=>set_new_ok_code
EXPORTING
ok_code = 'DETAIL'.
ENDMETHOD. "handle_user_command
Regards
Uwe -
Hello Experts,
I'm trying to write a Inner join on VBAK and VBAP because i need to get data from both tables. When I try to execute the following code I'm getting a short dump "Error in module RSQL of the database Interface". Can anybody see what's wrong with this select.
begin of t_sales_order,
vbeln type vbak-vbeln, "Sales Order
auart type vbak-auart, "Order Type
audat type vbak-audat, "Shipment Creation date field
posnr type vbap-posnr, "Items
kdmat type vbap-matnr, "Lead Pin
cuobj type vbap-cuobj, "Configuration Object ID
end of t_sales_order,
data: lwa_sales_order type t_Sales_Order.
select single avbeln aaudat a~auart
bposnr bkdmat b~cuobj
into lwa_sales_order
from vbak as a inner join vbap as b
on avbeln = bvbeln
where b~kdmat = pv_pin_number.
Many thanks in advance.Hi
Your internal table fields sequences are not followed in Inner Join.
begin of t_sales_order,
vbeln type vbak-vbeln, "Sales Order
auart type vbak-auart, "Order Type
audat type vbak-audat, "Shipment Creation date field
posnr type vbap-posnr, "Items
kdmat type vbap-matnr, "Lead Pin
cuobj type vbap-cuobj, "Configuration Object ID
end of t_sales_order,
select single a~vbeln *a~auart* a~audat
b~posnr b~kdmat b~cuobj
into lwa_sales_order
from vbak as a inner join vbap as b
on a~vbeln = b~vbeln
where b~kdmat = pv_pin_number.
Please check the above code
Shiva -
Hi ,
I am selecting data (Around 100 fields)from 4 different tables(a,b,c,d) using INNER JOIN .I get the Runtime error (DUMP) SAPSQL_AMBIGUOUS_FIELDNAME .Since one of the selection field is availble in both c & d tables but i need that to be selected from c alone.
Now i have used Select * to select the fields.
SELECT *
INTO CORRESPONDING FIELDS OF TABLE int_tab
FROM a AS a INNER JOIN b AS b
ON a~key1 = b~key1
INNER JOIN c as c
on c~key2 = a~key2
INNER JOIN d as d
on d~key2 = a~key2
where......
thanks,
sriniHi Chellama,
although this thread is already passed, you might be interested in understanding the use of an ALIAS in open SQL clauses:
You can use the AS clause to define a new name (alias) for a fieldname or table name.
Use select a b c as d into corresponding fields of destination if you want the values of fields a and b to be moved to fields a and b of the destination structure but the value of field c to go to field d of destination structure.
For table names it is the same logic. Yor sample code
select a~ xxxx
a~key1
b~key1
b~yyyy
INTO CORRESPONDING FIELDS OF TABLE int_tab
FROM a AS db_tab1 INNER JOIN b AS db_tab2
ON a~key1 = b~key1
is syntactically wrong because you defined the alias db_tab1for table a and db_tab2 for table b. Now the fields akey1 and so on are unknown, you could use only db_tab1key1 etc.
In Join conditions, you will almost never need an alias clause. Corrected code is
select a~xxxx
a~key1
b~key1
b~yyyy
INTO CORRESPONDING FIELDS OF TABLE int_tab
FROM a
INNER JOIN b
ON a~key1 = b~key1
This is much more transparent for the one who has to read and understand the code.
Regards,
Clemens -
Hi forum,
Pls help me out...I'm getting short dump if i execute this..
pls correct the code.......
REPORT ZPAY_REG NO STANDARD PAGE HEADING line-size 150 line-count
65(3).
TYPE-POOLS: slis.
TABLES:
payr,
t012,
t012k,
t51r5.
Data : begin of it occurs 0,
zbukr like payr-zbukr, "paying company code
hbkid like payr-hbkid, "house bank id
hktid like payr-hktid, "account id
bankl like t012-bankl, "bank key
bankn like t012k-bankn, "bank account
checf like payr-checf, "check number
waers like payr-waers, "currency
rwbtr like payr-rwbtr, "amount
bancd like payr-bancd, "check encashment date
vblnr like payr-vblnr, "payment document no
pernr like payr-pernr, "personnel number
voidr like payr-voidr, "void reason code
rzawe like payr-rzawe, "payment method
laufd like payr-laufd, "checks from payment run
empfg like payr-empfg, "payee code
gjahr like payr-gjahr, "fiscal year
duedt like t51r5-duedt, "due date
zaldt like payr-zaldt, "payment date
znme1 like payr-znme1, "payee name
rec_belnr like payr-rec_belnr, " voucher number
end of it.
*"Payment Register
*A listing of payments made by vendor for a specific payment run or
*group of runs. Data elements include but not limited to:
** Payment date
* Pay
* Payment number
* Payee name/number
* Voucher number
* Amount
* Period from/to
*Frequency: Every payment run, ad hoc for a timeframe, monthly
DATA: it_fldcat TYPE slis_fieldcat_alv OCCURS 0,
wa_fldcat TYPE slis_fieldcat_alv.
DATA : it_sort TYPE slis_sortinfo_alv OCCURS 0,
wa_sort TYPE slis_sortinfo_alv.
DATA: it_events TYPE slis_t_event,
wa_events TYPE slis_alv_event.
"DATA : v_txt TYPE string.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS : s_zaldt FOR payr-zaldt, " payment date
s_vblnr FOR payr-vblnr, " payment document number
s_znme1 FOR payr-znme1, " payee name
s_rec FOR payr-rec_belnr, "voucher number
s_waers for payr-waers. "amount
s_duedt for t51r5-duedt. "due date
SELECTION-SCREEN END OF BLOCK b1.
SELECT a~zbukr
a~hbkid
a~hktid
a~checf
a~waers
a~rwbtr
a~bancd
a~vblnr
a~pernr
a~voidr
a~rzawe
a~laufd
a~empfg
a~gjahr
a~zaldt
a~znme1
a~rec_belnr
b~bankl
c~bankn
d~duedt
INTO CORRESPONDING FIELDS OF TABLE it
FROM payr AS a
INNER JOIN t012 AS b
ON ahbkid = bhbkid
inner join t012k as c
on bhbkid = chbkid
and on ahbkid = chbkid
inner join t51r5 as d
on cbukrs = dbukrs
and on awaers = dwaers
WHERE a~zaldt IN s_zaldt
AND a~vblnr IN s_vblnr
AND a~znme1 IN s_znme1
AND a~rec_belnr IN s_rec
AND a~waers IN s_waers.
loop at it.
write : / it-zbukr, it-hbkid, it-hktid, it-checf, it-waers, it-rwbtr,
it-bancd, it-vblnr, it-pernr, it-voidr, it-rzawe, it-laufd, it-empfg,
it-gjahr, it-zaldt, it-znme1, it-rec_belnr, it-bankl, it-bankn, it-duedt
endloop.
**--show data--
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY' "Displaying data in grid format
EXPORTING
i_callback_program = sy-repid
it_fieldcat = it_fldcat "fieldcatalog
it_sort = it_sort[] "Sort
it_events = it_events
TABLES
t_outtab = it "internal table to output
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
" SHOW_DATA
PERFORM BUILD_FLDCAT.
*& Form BUILD_FLDCAT
FORM build_fldcat .
DEFINE bld_fcat. "Macro to create manual field catalog
wa_fldcat-col_pos = &1.
wa_fldcat-fieldname = &2.
wa_fldcat-outputlen = &3.
wa_fldcat-seltext_s = &4.
wa_fldcat-ddictxt = &5.
append wa_fldcat to it_fldcat.
clear wa_fldcat.
END-OF-DEFINITION.
bld_fcat 1 'zbukr' 4 'Payee Company Code' 'L'.
bld_fcat 2 'hbkid' 5 'Short Key for a house bank' 'L'.
bld_fcat 3 'hktid' 5 'ID for account details' 'L'.
bld_fcat 4 'checf' 13 'Check number from' 'L'.
bld_fcat 5 'waers' 5 'Currency Key' 'L'.
bld_fcat 6 'rwbtr' 13 'Amount paid in tha payment currency' 'L'.
bld_fcat 7 'bancd' 8 'Check encashment date' 'L'.
bld_fcat 8 'vblnr' 10 'Document number of the payment document' 'L'.
bld_fcat 9 'pernr' 8 'Personnel number' 'L'.
bld_fcat 10 'voidr' 2 'Check region code' 'L'.
bld_fcat 11 'rzawe' 1 'payment method' 'L'.
bld_fcat 12 'laufd' 8 'Date on which the program is to be run' 'L'.
bld_fcat 13 'empfg' 16 'Payee code' 'L'.
bld_fcat 14 'gjahr' 4 'Fiscal Year' 'L'.
bld_fcat 15 'zaldt' 8 'Probable payment date' 'L'.
bld_fcat 16 'znme1' 35 'Payee Name' 'L'.
bld_fcat 17 'rec_belnr' 10 'Accounting Document Number Ref to Vocher Number' 'L'.
bld_fcat 18 'bankl' 15 'Bank key' 'L'.
bld_fcat 19 'bankn' 18 'Bank account number' 'L'.
bld_fcat 20 'duedt' 8 'Due Date' 'L'.
LOOP AT it_fldcat INTO wa_fldcat.
IF wa_fldcat-fieldname = 'LIFNR'.
wa_fldcat-key = 'X'.
ELSEIF wa_fldcat-fieldname = 'DMBTR'.
wa_fldcat-do_sum = 'X'.
ELSEIF wa_fldcat-fieldname = 'WRBTR'.
wa_fldcat-do_sum = 'X'.
ENDIF.
MODIFY it_fldcat FROM wa_fldcat.
CLEAR wa_fldcat.
ENDLOOP.
ENDFORM.Hi Mahathi,
Please check the below code which is corrected.
*& Report ZPAY_REG *
REPORT ZPAY_REG NO STANDARD PAGE HEADING line-size 150 line-count
65(3).
TYPE-POOLS: slis.
TABLES:
payr,
t012,
t012k,
t51r5.
DATA : BEGIN OF it OCCURS 0,
zbukr LIKE payr-zbukr, "paying company code
hbkid LIKE payr-hbkid, "house bank id
hktid LIKE payr-hktid, "account id
bankl LIKE t012-bankl, "bank key
bankn LIKE t012k-bankn, "bank account
checf LIKE payr-checf, "check number
waers LIKE payr-waers, "currency
rwbtr LIKE payr-rwbtr, "amount
bancd LIKE payr-bancd, "check encashment date
vblnr LIKE payr-vblnr, "payment document no
pernr LIKE payr-pernr, "personnel number
voidr LIKE payr-voidr, "void reason code
rzawe LIKE payr-rzawe, "payment method
laufd LIKE payr-laufd, "checks from payment run
empfg LIKE payr-empfg, "payee code
gjahr LIKE payr-gjahr, "fiscal year
duedt LIKE t51r5-duedt, "due date
zaldt LIKE payr-zaldt, "payment date
znme1 LIKE payr-znme1, "payee name
rec_belnr LIKE payr-rec_belnr, " voucher number
END OF it.
*"Payment Register
*A listing of payments made by vendor for a specific payment run or
*group of runs. Data elements include but not limited to:
** Payment date
* Pay
* Payment number
* Payee name/number
* Voucher number
* Amount
* Period from/to
*Frequency: Every payment run, ad hoc for a timeframe, monthly
DATA: it_fldcat TYPE slis_fieldcat_alv OCCURS 0,
wa_fldcat TYPE slis_fieldcat_alv.
DATA : it_sort TYPE slis_sortinfo_alv OCCURS 0,
wa_sort TYPE slis_sortinfo_alv.
DATA: it_events TYPE slis_t_event,
wa_events TYPE slis_alv_event.
"DATA : v_txt TYPE string.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS : s_zaldt FOR payr-zaldt, " payment date
s_vblnr FOR payr-vblnr, " payment document number
s_znme1 FOR payr-znme1, " payee name
s_rec FOR payr-rec_belnr, "voucher number
s_waers FOR payr-waers, "amount
s_duedt FOR t51r5-duedt. "due date
SELECTION-SCREEN END OF BLOCK b1.
SELECT a~zbukr
a~hbkid
a~hktid
a~checf
a~waers
a~rwbtr
a~bancd
a~vblnr
a~pernr
a~voidr
a~rzawe
a~laufd
a~empfg
a~gjahr
a~zaldt
a~znme1
a~rec_belnr
b~bankl
c~bankn
d~duedt
INTO CORRESPONDING FIELDS OF TABLE it
FROM payr AS a
INNER JOIN t012 AS b
ON ahbkid = bhbkid
INNER JOIN t012k AS c
ON bhbkid = chbkid
AND ahbkid = chbkid
INNER JOIN t51r5 AS d
ON cbukrs = dbukrs
AND awaers = dwaers
WHERE a~zaldt IN s_zaldt
AND a~vblnr IN s_vblnr
AND a~znme1 IN s_znme1
AND a~rec_belnr IN s_rec
AND a~waers IN s_waers.
*LOOP AT it.
WRITE : / it-zbukr, it-hbkid, it-hktid, it-checf, it-waers, it-rwbtr,
it-bancd, it-vblnr, it-pernr, it-voidr, it-rzawe, it-laufd, it-empfg,
*it-gjahr, it-zaldt, it-znme1, it-rec_belnr, it-bankl, it-bankn,
*it-duedt
*ENDLOOP.
*--show data--
" SHOW_DATA
PERFORM build_fldcat.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY' "Displaying data in grid format
EXPORTING
i_callback_program = sy-repid
it_fieldcat = it_fldcat[] "fieldcatalog
it_sort = it_sort[] "Sort
it_events = it_events
TABLES
t_outtab = it "internal table to output
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc = 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*& Form BUILD_FLDCAT
FORM build_fldcat .
DEFINE bld_fcat. "Macro to create manual field catalog
wa_fldcat-col_pos = &1.
wa_fldcat-fieldname = &2.
wa_fldcat-outputlen = &3.
wa_fldcat-seltext_s = &4.
wa_fldcat-ddictxt = &5.
append wa_fldcat to it_fldcat.
clear wa_fldcat.
END-OF-DEFINITION.
bld_fcat 1 'zbukr' 4 'Payee Company Code' 'L'.
bld_fcat 2 'hbkid' 5 'Short Key for a house bank' 'L'.
bld_fcat 3 'hktid' 5 'ID for account details' 'L'.
bld_fcat 4 'checf' 13 'Check number from' 'L'.
bld_fcat 5 'waers' 5 'Currency Key' 'L'.
bld_fcat 6 'rwbtr' 13 'Amount paid in tha payment currency' 'L'.
bld_fcat 7 'bancd' 8 'Check encashment date' 'L'.
bld_fcat 8 'vblnr' 10 'Document number of the payment document' 'L'.
bld_fcat 9 'pernr' 8 'Personnel number' 'L'.
bld_fcat 10 'voidr' 2 'Check region code' 'L'.
bld_fcat 11 'rzawe' 1 'payment method' 'L'.
bld_fcat 12 'laufd' 8 'Date on which the program is to be run' 'L'.
bld_fcat 13 'empfg' 16 'Payee code' 'L'.
bld_fcat 14 'gjahr' 4 'Fiscal Year' 'L'.
bld_fcat 15 'zaldt' 8 'Probable payment date' 'L'.
bld_fcat 16 'znme1' 35 'Payee Name' 'L'.
bld_fcat 17 'rec_belnr' 10 'Account DocuNumberRef to Vocher Number' 'L'.
bld_fcat 18 'bankl' 15 'Bank key' 'L'.
bld_fcat 19 'bankn' 18 'Bank account number' 'L'.
bld_fcat 20 'duedt' 8 'Due Date' 'L'.
LOOP AT it_fldcat INTO wa_fldcat.
IF wa_fldcat-fieldname = 'LIFNR'.
wa_fldcat-key = 'X'.
ELSEIF wa_fldcat-fieldname = 'DMBTR'.
wa_fldcat-do_sum = 'X'.
ELSEIF wa_fldcat-fieldname = 'WRBTR'.
wa_fldcat-do_sum = 'X'.
ENDIF.
MODIFY it_fldcat FROM wa_fldcat.
CLEAR wa_fldcat.
ENDLOOP.
ENDFORM. "build_fldcat
Please reward points if it is answered and close the thread.
Regards,
Hari -
Short dump while export grid alv with subtotals.
hello,
its strange and i face first time that my grid alv report goin to short dump while i done subtotals and send it to local file thru export.
if am not doing subtotals then export it to local file it goin fine.
whats it has problem plz give ur helping hends.
here i copied a dump msg also.
Short text
Error at assignment: Overwritten protected field.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLKKBL" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
A new value is to be assigned to the field "<L_UNIT>", although this field is
entirely or partly protected against changes.
The following are protected against changes:
- Character literals or numeric literals
- Constants (CONSTANTS)
- Parameters of the category IMPORTING REFERENCE for functions and
methods
- Untyped field symbols not yet assigned a field using ASSIGN
- TABLES parameters if the actual parameter is protected against changes
- USING reference parameters and CHANGING parameters for FORMs, if the
actual parameter is protected against changes and
- Accesses using field symbols if the field assigned using ASSIGN is
protected (or partially protected, e.g. key components of an internal
table with the type SORTED or HASHED TABLE) against changes
- Accesses using references, if the field bound to the reference is
protected (or partially protected) against changes
- External write accesses to READ-ONLY attributes,
- Content of a shared object area instance accessed using a shared lock
(ATTACH_FOR_READ).
regards amit.& Object Id : &
& Object Name : &
& Function Module Name : Sales Register &
& Transaction Code : &
& Author : Amit gujargoud &
& Module Name : SD &
& Sub-Module : &
& Program Type : Dialog Create Date : 02/02/2007 &
& SAP Release : ECC 6.0 &
& Description : Sales Register - Detail &
*& Report ZSALESREGISTER
REPORT zsd_salesregister.
*& TYPE-POOLS
TYPE-POOLS : slis.
*& TABLES
TABLES: vbrp, "Billing Document: Item Data
vbrk, "Billing Document: Header Data
lips, "SD document: Delivery: Item data
lfa1, "Vendor Master (General Section)
kna1, "General Data in Customer Master
vbak, "Sales Document: Header Data
vbpa, "Sales Document: Partner (Gopal)
likp, "SD Document: Delivery Header Data
vbap, "Sales Document: Item Data
vbkd, "Sales Document: Business Data
mara. "General Material Data
*& DATA DECLARATION
DATA: BEGIN OF i_report OCCURS 100,
vbeln LIKE vbrp-vbeln, "Billing Document
posnr LIKE vbrp-posnr,
matnr LIKE mara-matnr ,
aubel LIKE vbrp-aubel, "Sales Document
fkimg LIKE vbrp-fkimg, "Actual billed quantity
vrkme LIKE vbrp-vrkme, "Sales unit
arktx LIKE vbrp-arktx, "Short text for sales order item
vgbel LIKE vbrp-vgbel, "Doc number of the reference document
werks LIKE vbap-werks,
vkgrp LIKE vbrp-vkgrp,
fklmg LIKE vbrp-fklmg,
volum LIKE vbrp-volum,
vkbur LIKE vbrp-vkbur,
vtweg_auft LIKE vbrp-vtweg_auft,
auart LIKE vbak-auart,
tabix LIKE sy-tabix, "Internal Table, Current Row Index
name1 LIKE kna1-name1, "Name1
exnum LIKE j_1iexchdr-exnum, "Official Excise Document Number
orqty TYPE p DECIMALS 0,
penqty TYPE p DECIMALS 0, "Cumulative order qty in sls units
openqty TYPE p DECIMALS 0, "Cumulative order qty in sls units
ean11 LIKE lips-ean11, "International Article No(EAN/UPC)
volum LIKE lips-volum,
lgmng LIKE lips-lgmng,
traid LIKE likp-traid,
ort01 LIKE lfa1-ort01, "City
lifnr LIKE lfa1-lifnr, "A/c Number of Vendor or Creditor
netwr LIKE vbrp-netwr, "Net val of bill item in doc currency
kunnr LIKE vbak-kunnr, "Sold-to party
adrnr LIKE vbpa-adrnr, "Address
city1 LIKE adrc-city1, "City
tprtr LIKE lfa1-name1, "Name 1
knumv LIKE konv-knumv, "Number of the document condition
kposn LIKE konv-kposn,
rate LIKE konv-kbetr, "Rate (cond amount or percentage)
bas_val LIKE konv-kwert, "Rate (cond amount or percentage)
exc_duty LIKE konv-kwert, "Rate (cond amount or percentage)
ed_cess LIKE konv-kwert, "Rate (cond amount or percentage)
freight LIKE konv-kwert, "Rate (cond amount or percentage)
pack LIKE konv-kwert, "Rate (cond amount or percentage)
cst LIKE konv-kwert, "Rate (cond amount or percentage)
vat LIKE konv-kwert, "Rate (cond amount or percentage)
ent_tax LIKE konv-kwert, "Rate (cond amount or percentage)
tot_inv LIKE konv-kwert, "Rate (cond amount or percentage)
tot_inv_round LIKE konv-kwert, "Rate (cond amount or percentage)
disc_tot LIKE konv-kwert, "Discount total - Z001 to Z020
vat_rate LIKE konv-kbetr,
cst_rate LIKE konv-kbetr,
lst_rate LIKE konv-kbetr,
mwsbk LIKE vbrk-mwsbk,
bas_tax LIKE konv-kwert,
dev_tax LIKE konv-kwert,
tcs_tax LIKE konv-kwert,
bas_tot LIKE konv-kwert,
lst LIKE konv-kwert,
vkorg LIKE vbak-vkorg,
mvgr1 LIKE mvke-mvgr1,
mvgr2 LIKE mvke-mvgr2,
mvgr3 LIKE mvke-mvgr3,
mvgr4 LIKE mvke-mvgr4,
mvgr5 LIKE mvke-mvgr5,
text1 LIKE tvm1t-bezei,
text2 LIKE tvm1t-bezei,
text3 LIKE tvm1t-bezei,
text4 LIKE tvm1t-bezei,
text5 LIKE tvm1t-bezei,
bismit_area TYPE p DECIMALS 4, " Size (L*B) in mm
face_area TYPE p DECIMALS 2, " Face Area Declaration
notional_area TYPE p DECIMALS 2,
stock_pcs TYPE p , " decimals 3 Pcs of Stock
labst LIKE mard-labst, " Valuated Unrestricted-Use Stock
bismt LIKE mara-bismt, " Size (L*B) in mm
normt LIKE mara-normt, " Industry Standard Description
temp TYPE p DECIMALS 2,
temp1 TYPE p DECIMALS 2,
temp2 TYPE p DECIMALS 2,
temp3 TYPE p DECIMALS 2,
temp4 TYPE p DECIMALS 2,
temp5 TYPE p DECIMALS 2,
temp6 TYPE p DECIMALS 2,
temp7 TYPE p DECIMALS 2,
temp8 TYPE p DECIMALS 2,
temp9 TYPE p DECIMALS 2,
temp10 TYPE p DECIMALS 2,
temp11 TYPE p DECIMALS 2,
temp12 TYPE p DECIMALS 2,
temp13 TYPE p DECIMALS 0,
temp14 TYPE p DECIMALS 0,
temp15 TYPE p DECIMALS 0,
temp16 TYPE p DECIMALS 2,
temp17 TYPE p DECIMALS 2,
temp18 TYPE p DECIMALS 2,
temp19 TYPE p DECIMALS 2,
temp20 TYPE p DECIMALS 2,
temp21 TYPE p DECIMALS 2,
waybill(20) TYPE c,
audat LIKE vbak-audat, "Document Date (Date Received/Sent)
lgort LIKE vbap-lgort, "Storage location
lgobe LIKE t001l-lgobe, "Description of storage location
erdat LIKE vbrk-erdat, "Date on which the record was created
exdat LIKE j_1iexchdr-exdat, "Excise Document Date
vbtyp LIKE vbak-vbtyp, "SD document category
acdt LIKE likp-wadat_ist, "Actual goods movement date
fkdat LIKE vbrk-fkdat,
ship LIKE kna1-name1, "Name1 (Ship-to party)
fksto LIKE vbrk-fksto,
fkart LIKE vbrk-fkart,
bezei LIKE t005u-bezei,
vtweg LIKE vbak-vtweg,
spart LIKE vbak-spart,
matkl LIKE mara-matkl,
wgbez LIKE t023t-wgbez,
mtart LIKE mara-mtart,
labor LIKE mara-labor,
ferth LIKE mara-ferth,
lbtxt LIKE t024x-lbtxt,
niels LIKE kna1-niels,
kukla LIKE kna1-kukla,
desc LIKE tvkbt-bezei,
brsch LIKE kna1-brsch,
zeinr LIKE mara-zeinr,
bzirk LIKE vbrk-bzirk,
area_desc LIKE tnlst-bezei,
dist_desc TYPE tkukt-vtext,
taluka_desc TYPE t016t-brtxt,
sales_desc TYPE tvgrt-bezei,
kmein LIKE konv-kmein, "Sales Unit
challan LIKE likp-vbeln,
END OF i_report.
data for MVKE
DATA: BEGIN OF i_report_mvke OCCURS 0,
vbeln LIKE vbrp-vbeln, "Billing Document
aubel LIKE vbrp-aubel, "Sales Document
vkorg LIKE vbak-vkorg,
matnr LIKE mara-matnr ,
vtweg LIKE vbak-vtweg,
END OF i_report_mvke.
***********************TEMP COPY
DATA: BEGIN OF i_report_temp OCCURS 0,
vbeln LIKE vbrp-vbeln, "Billing Document
posnr LIKE vbrp-posnr,
matnr LIKE mara-matnr ,
aubel LIKE vbrp-aubel, "Sales Document
fkimg LIKE vbrp-fkimg, "Actual billed quantity
vrkme LIKE vbrp-vrkme, "Sales unit
arktx LIKE vbrp-arktx, "Short text for sales order item
vgbel LIKE vbrp-vgbel, "Doc number of the reference document
werks LIKE vbap-werks,
vkgrp LIKE vbrp-vkgrp,
fklmg LIKE vbrp-fklmg,
volum LIKE vbrp-volum,
vkbur LIKE vbrp-vkbur,
vtweg_auft LIKE vbrp-vtweg_auft,
auart LIKE vbak-auart,
tabix LIKE sy-tabix, "Internal Table, Current Row Index
name1 LIKE kna1-name1, "Name1
exnum LIKE j_1iexchdr-exnum, "Official Excise Document Number
orqty TYPE p DECIMALS 0,
penqty TYPE p DECIMALS 0, "Cumulative order qty in sls units
openqty TYPE p DECIMALS 0, "Cumulative order qty in sls units
ean11 LIKE lips-ean11, "International Article No(EAN/UPC)
volum LIKE lips-volum,
lgmng LIKE lips-lgmng,
traid LIKE likp-traid,
ort01 LIKE lfa1-ort01, "City
lifnr LIKE lfa1-lifnr, "A/c Number of Vendor or Creditor
netwr LIKE vbrp-netwr, "Net val of bill item in doc currency
kunnr LIKE vbak-kunnr, "Sold-to party
adrnr LIKE vbpa-adrnr, "Address
city1 LIKE adrc-city1, "City
tprtr LIKE lfa1-name1, "Name 1
knumv LIKE konv-knumv, "Number of the document condition
kposn LIKE konv-kposn,
rate LIKE konv-kbetr, "Rate (cond amount or percentage)
bas_val LIKE konv-kwert, "Rate (cond amount or percentage)
exc_duty LIKE konv-kwert, "Rate (cond amount or percentage)
ed_cess LIKE konv-kwert, "Rate (cond amount or percentage)
freight LIKE konv-kwert, "Rate (cond amount or percentage)
pack LIKE konv-kwert, "Rate (cond amount or percentage)
cst LIKE konv-kwert, "Rate (cond amount or percentage)
vat LIKE konv-kwert, "Rate (cond amount or percentage)
ent_tax LIKE konv-kwert, "Rate (cond amount or percentage)
tot_inv LIKE konv-kwert, "Rate (cond amount or percentage)
tot_inv_round LIKE konv-kwert, "Rate (cond amount or percentage)
disc_tot LIKE konv-kwert, "Discount total - Z001 to Z020
vat_rate LIKE konv-kbetr,
cst_rate LIKE konv-kbetr,
lst_rate LIKE konv-kbetr,
mwsbk LIKE vbrk-mwsbk,
bas_tax LIKE konv-kwert,
dev_tax LIKE konv-kwert,
tcs_tax LIKE konv-kwert,
bas_tot LIKE konv-kwert,
lst LIKE konv-kwert,
vkorg LIKE vbak-vkorg,
mvgr1 LIKE mvke-mvgr1,
mvgr2 LIKE mvke-mvgr2,
mvgr3 LIKE mvke-mvgr3,
mvgr4 LIKE mvke-mvgr4,
mvgr5 LIKE mvke-mvgr5,
text1 LIKE tvm1t-bezei,
text2 LIKE tvm1t-bezei,
text3 LIKE tvm1t-bezei,
text4 LIKE tvm1t-bezei,
text5 LIKE tvm1t-bezei,
bismit_area TYPE p DECIMALS 4, " Size (L*B) in mm
face_area TYPE p DECIMALS 2, " Face Area Declaration
notional_area TYPE p DECIMALS 2,
stock_pcs TYPE p , " decimals 3 Pcs of Stock
labst LIKE mard-labst, " Valuated Unrestricted-Use Stock
bismt LIKE mara-bismt, " Size (L*B) in mm
normt LIKE mara-normt, " Industry Standard Description
temp TYPE p DECIMALS 2,
temp1 TYPE p DECIMALS 2,
temp2 TYPE p DECIMALS 2,
temp3 TYPE p DECIMALS 2,
temp4 TYPE p DECIMALS 2,
temp5 TYPE p DECIMALS 2,
temp6 TYPE p DECIMALS 2,
temp7 TYPE p DECIMALS 2,
temp8 TYPE p DECIMALS 2,
temp9 TYPE p DECIMALS 2,
temp10 TYPE p DECIMALS 2,
temp11 TYPE p DECIMALS 2,
temp12 TYPE p DECIMALS 2,
temp13 TYPE p DECIMALS 0,
temp14 TYPE p DECIMALS 0,
temp15 TYPE p DECIMALS 0,
temp16 TYPE p DECIMALS 2,
temp17 TYPE p DECIMALS 2,
temp18 TYPE p DECIMALS 2,
temp19 TYPE p DECIMALS 2,
temp20 TYPE p DECIMALS 2,
temp21 TYPE p DECIMALS 2,
waybill(20) TYPE c,
audat LIKE vbak-audat, "Document Date (Date Received/Sent)
lgort LIKE vbap-lgort, "Storage location
lgobe LIKE t001l-lgobe, "Description of storage location
erdat LIKE vbrk-erdat, "Date on which the record was created
exdat LIKE j_1iexchdr-exdat, "Excise Document Date
vbtyp LIKE vbak-vbtyp, "SD document category
acdt LIKE likp-wadat_ist, "Actual goods movement date
fkdat LIKE vbrk-fkdat,
ship LIKE kna1-name1, "Name1 (Ship-to party)
fksto LIKE vbrk-fksto,
fkart LIKE vbrk-fkart,
bezei LIKE t005u-bezei,
vtweg LIKE vbak-vtweg,
spart LIKE vbak-spart,
matkl LIKE mara-matkl,
wgbez LIKE t023t-wgbez,
mtart LIKE mara-mtart,
labor LIKE mara-labor,
ferth LIKE mara-ferth,
lbtxt LIKE t024x-lbtxt,
niels LIKE kna1-niels,
kukla LIKE kna1-kukla,
desc LIKE tvkbt-bezei,
brsch LIKE kna1-brsch,
zeinr LIKE mara-zeinr,
bzirk LIKE vbrk-bzirk,
area_desc LIKE tnlst-bezei,
dist_desc TYPE tkukt-vtext,
taluka_desc TYPE t016t-brtxt,
sales_desc TYPE tvgrt-bezei,
kmein LIKE konv-kmein, "Sales Unit
challan LIKE likp-vbeln,
END OF i_report_temp.
DATA: BEGIN OF i_vbap OCCURS 0 ,
posnr LIKE vbap-posnr,
vbeln LIKE vbap-vbeln ,
matnr LIKE vbap-matnr ,
werks LIKE vbap-werks,
kwmeng LIKE vbap-kwmeng,
lgort LIKE vbap-lgort,
matkl LIKE mara-matkl,
wgbez LIKE t023t-wgbez,
mtart LIKE mara-mtart,
END OF i_vbap .
DATA : w_temp_cal(20) TYPE c.
DATA : w_face_area TYPE p DECIMALS 4,
w_notinal_area TYPE p DECIMALS 4.
**MVKE
DATA: BEGIN OF itab_mvke OCCURS 0,
matnr LIKE mvke-matnr,
vkorg LIKE vbak-vkorg,
vtweg LIKE mvke-vtweg,
mvgr1 LIKE mvke-mvgr1,
mvgr2 LIKE mvke-mvgr2,
mvgr3 LIKE mvke-mvgr3,
mvgr4 LIKE mvke-mvgr4,
mvgr5 LIKE mvke-mvgr5,
END OF itab_mvke.
**TVM1T
DATA : BEGIN OF itab_tvm1t OCCURS 0,
spras LIKE tvm1t-spras,
mvgr1 LIKE tvm1t-mvgr1,
bezei LIKE tvm1t-bezei,
END OF itab_tvm1t.
DATA : BEGIN OF itab_tvm2t OCCURS 0,
spras LIKE tvm2t-spras,
mvgr2 LIKE tvm2t-mvgr2,
bezei LIKE tvm2t-bezei,
END OF itab_tvm2t.
DATA : BEGIN OF itab_tvm3t OCCURS 0,
spras LIKE tvm3t-spras,
mvgr3 LIKE tvm3t-mvgr3,
bezei LIKE tvm3t-bezei,
END OF itab_tvm3t.
DATA : BEGIN OF itab_tvm4t OCCURS 0,
spras LIKE tvm4t-spras,
mvgr4 LIKE tvm4t-mvgr4,
bezei LIKE tvm4t-bezei,
END OF itab_tvm4t.
DATA : BEGIN OF itab_tvm5t OCCURS 0,
spras LIKE tvm5t-spras,
mvgr5 LIKE tvm5t-mvgr5,
bezei LIKE tvm5t-bezei,
END OF itab_tvm5t.
DATA: itab_t024x TYPE STANDARD TABLE OF t024x WITH HEADER LINE,
it_report LIKE LINE OF i_report OCCURS 0,
i_mvke LIKE LINE OF itab_mvke OCCURS 0.
**VBKD
DATA: BEGIN OF i_vbkd OCCURS 0 ,
vbeln LIKE vbkd-vbeln ,
posnr LIKE vbkd-posnr ,
bzirk LIKE vbkd-bzirk ,
END OF i_vbkd .
DATA: BEGIN OF i_lips OCCURS 0,
vbeln LIKE lips-vbeln,
ean11 LIKE lips-ean11,
volum LIKE lips-volum,
lgmng LIKE lips-lgmng,
waybill(20) TYPE c,
END OF i_lips.
DATA: BEGIN OF i_vbrk OCCURS 0,
vbeln LIKE vbrk-vbeln,
rfbsk LIKE vbrk-rfbsk, "Status for transfer to accounting
erdat LIKE vbrk-erdat, "Dt on which the record was created
fkdat LIKE vbrk-fkdat, "CHANGE MADE BY PARTHA RAHAMAN
fksto LIKE vbrk-fksto, "GOPAL:: CANCELLED DOC. DO NOT PRNT.
netwr LIKE vbrk-netwr,
fkart LIKE vbrk-fkart, "Gopal:when billng typ=s1 do not pnt 1jul
knumv LIKE vbrk-knumv,
mwsbk LIKE vbrk-mwsbk,
bzirk LIKE vbrk-bzirk,
vtweg LIKE vbrk-vtweg,
spart LIKE vbrk-spart,
END OF i_vbrk.
*structure for MARD Table by kalika
DATA : BEGIN OF itab_mard OCCURS 0,
matnr LIKE mard-matnr,
werks LIKE mard-werks,
labst LIKE mard-labst, " Valuated Unrestricted-Use Stock
lgort LIKE mard-lgort, " Storage Location
END OF itab_mard.
*structure for MARD Table by kalika
DATA:BEGIN OF i_kna1 OCCURS 0,
vbeln LIKE vbak-vbeln,
name1 LIKE kna1-name1,
kunnr LIKE kna1-kunnr,
regio LIKE kna1-regio,
bezei LIKE t005u-bezei,
land1 LIKE kna1-land1,
vkgrp LIKE vbak-vkgrp,
niels LIKE kna1-niels,
kukla LIKE kna1-kukla,
brsch LIKE kna1-brsch,
vkbur LIKE vbak-vkbur,
END OF i_kna1.
DATA:BEGIN OF i_t005u OCCURS 0,
spras LIKE t005u-spras,
land1 LIKE t005u-land1,
bland LIKE t005u-bland,
bezei LIKE t005u-bezei,
END OF i_t005u.
DATA:BEGIN OF i_tnlst OCCURS 0,
spras LIKE t005u-spras,
niels LIKE tnlst-niels,
bezei LIKE t005u-bezei,
END OF i_tnlst.
DATA:BEGIN OF itab_tkukt OCCURS 0,
spras LIKE tkukt-spras,
kukla LIKE tkukt-kukla,
vtext LIKE tkukt-vtext,
END OF itab_tkukt.
DATA : BEGIN OF itab_t016t OCCURS 0,
spras LIKE t016t-spras,
brsch LIKE t016t-brsch,
brtxt LIKE t016t-brtxt,
END OF itab_t016t.
DATA : BEGIN OF itab_tvgrt OCCURS 0,
spras LIKE tvgrt-spras,
vkgrp LIKE tvgrt-vkgrp,
bezei LIKE tvgrt-bezei,
END OF itab_tvgrt.
*DATA: i_t005u TYPE STANDARD TABLE OF t005u WITH HEADER LINE.
DATA:BEGIN OF i_kna2 OCCURS 0,
kunnr LIKE kna1-kunnr,
name1 LIKE kna1-name1, " For Ship-to-Party
END OF i_kna2.
DATA:BEGIN OF i_vbak OCCURS 0,
vbeln LIKE vbak-vbeln,
vbtyp LIKE vbak-vbtyp,
audat LIKE vbak-audat,
auart LIKE vbak-auart,
vtweg LIKE vbak-vtweg,
spart LIKE vbak-spart,
vkbur LIKE vbak-vkbur,
vkorg LIKE vbak-vkorg,
END OF i_vbak.
DATA:BEGIN OF i_adrc OCCURS 0,
vbeln LIKE vbpa-vbeln,
kunnr LIKE kna1-kunnr,
city1 LIKE adrc-city1,
name1 LIKE kna1-name1, "Name1 (Ship-to party)
END OF i_adrc.
DATA:BEGIN OF i_lfa1 OCCURS 0,
lifnr LIKE vbpa-lifnr,
vbeln LIKE vbpa-vbeln,
name1 LIKE lfa1-name1,
END OF i_lfa1.
DATA : BEGIN OF it_knumv OCCURS 0,
vbeln LIKE vbrk-vbeln,
knumv LIKE vbrk-knumv,
END OF it_knumv.
DATA : BEGIN OF it_rate OCCURS 0,
ksteu LIKE konv-ksteu, "Condition control
knumv LIKE konv-knumv, "Number of the document condition
kschl LIKE konv-kschl, "Condition type
kbetr LIKE konv-kbetr, "Rate (condition amount or percentage)
kwert LIKE konv-kwert, "Condition value
kposn LIKE konv-kposn,
kmein LIKE konv-kmein, "Sales Unit
END OF it_rate.
DATA: BEGIN OF itab_exnum OCCURS 0,
exnum LIKE j_1iexchdr-exnum, "Official Excise Document Number
exdat LIKE j_1iexchdr-exdat, "Excise Document Date
rdoc LIKE j_1iexchdr-rdoc, "Reference Document 1
status LIKE j_1iexchdr-status,
END OF itab_exnum.
DATA: BEGIN OF itab_qty OCCURS 0,
kwmeng LIKE vbap-kwmeng,
vbeln LIKE vbap-vbeln,
lgort LIKE vbap-lgort,
END OF itab_qty.
*DATA: BEGIN OF i_stloc OCCURS 0,
lgort LIKE t001l-lgort,
lgobe LIKE t001l-lgobe,
END OF i_stloc.
DATA:t_line LIKE STANDARD TABLE OF tline INITIAL SIZE 0
WITH HEADER LINE,
" itab_tvkbt LIKE STANDARD TABLE OF tvkbt WITH HEADER LINE,
w_tdname LIKE thead-tdname.
DATA : BEGIN OF itab_tvkbt OCCURS 0,
spras LIKE tvkbt-spras,
vkbur LIKE tvkbt-vkbur,
bezei LIKE tvkbt-bezei,
END OF itab_tvkbt.
DATA: BEGIN OF i_exchdr OCCURS 0,
exnum LIKE j_1iexchdr-exnum,
exdat LIKE j_1iexchdr-exdat,
rdoc LIKE j_1iexchdr-rdoc,
END OF i_exchdr.
DATA: BEGIN OF i_likp OCCURS 0,
vbeln LIKE likp-vbeln,
wadat_ist LIKE likp-wadat_ist,
traid LIKE likp-traid,
bolnr LIKE likp-bolnr,
END OF i_likp.
DATA: BEGIN OF i_mara OCCURS 0,
matnr LIKE mara-matnr,
matkl LIKE mara-matkl,
mtart LIKE mara-mtart,
labor LIKE mara-labor,
wgbez LIKE t023t-wgbez,
bismt LIKE mara-bismt,
normt LIKE mara-normt,
ferth LIKE mara-ferth,
zeinr LIKE mara-zeinr,
extwg LIKE mara-extwg,
spart LIKE mara-spart,
END OF i_mara.
DATA: BEGIN OF i_t023t OCCURS 0,
matkl LIKE t023t-matkl,
wgbez LIKE t023t-wgbez,
END OF i_t023t.
DATA : var_length(20) TYPE c,
var_breadth(20) TYPE c.
DATA: p_w_value LIKE konv-kwert.
DATA : it_fieldcat TYPE slis_t_fieldcat_alv, " Event for Table to creater fieldcatalog
wa_fieldcat LIKE LINE OF it_fieldcat, " Work Area for table field catalog
lt_top_of_page TYPE slis_t_listheader, " Header table for top of page
i_layout TYPE slis_layout_alv . " It will fill the layout
gt_event TYPE slis_t_event. " Table Event
*DATA :
"itab_tnlst TYPE STANDARD TABLE OF tnlst WITH HEADER LINE,
" itab_tkukt TYPE STANDARD TABLE OF tkukt WITH HEADER LINE,
*" itab_t016t TYPE STANDARD TABLE OF t016t WITH HEADER LINE,
itab_tvgrt TYPE STANDARD TABLE OF tvgrt WITH HEADER LINE.
*& SELECTION-SCREEN
SELECTION-SCREEN BEGIN OF BLOCK block
WITH FRAME TITLE text-100.
SELECT-OPTIONS: s_date FOR vbrk-fkdat OBLIGATORY,
s_vkbur FOR vbak-vkbur OBLIGATORY,
s_vtweg FOR vbrk-vtweg OBLIGATORY,
s_werks FOR vbap-werks,
s_spart FOR vbrk-spart OBLIGATORY,
s_matkl FOR mara-matkl.
PARAMETERS:
r_opt3 RADIOBUTTON GROUP grp1,
r_opt2 RADIOBUTTON GROUP grp1.
r_opt4 RADIOBUTTON GROUP grp1,
r_opt5 RADIOBUTTON GROUP grp1,
r_opt1 RADIOBUTTON GROUP grp1.
SELECTION-SCREEN END OF BLOCK block.
*& INITIALIZATION
INITIALIZATION.
r_opt2 = 'X'.
*& START-OF-SELECTION.
START-OF-SELECTION.
*select data from VBRP
SELECT vbeln
posnr
matnr
aubel
fkimg
vrkme
arktx
vgbel
werks
vkgrp
fklmg
volum
vkbur
vtweg_auft
FROM vbrp
INTO TABLE i_report
WHERE "erdat IN s_date
AND spart IN s_spart
vkbur IN s_vkbur
AND vtweg_auft IN s_vtweg.
**logic for Pending, Summary & Detail Report
IF
r_opt1 EQ 'X' OR
r_opt2 EQ 'X' OR
r_opt3 EQ 'X'.
SELECT vbeln
rfbsk
erdat
fkdat
fksto
netwr
fkart
knumv
mwsbk
bzirk
vtweg
spart
FROM vbrk INTO TABLE i_vbrk
FOR ALL ENTRIES IN i_report
WHERE "vbeln = i_report-vbeln
" and
fkdat IN s_date
AND fkart IN ('ZBHR', 'ZTZT', 'ZKRP', 'ZRUD', 'ZBSR',
'ZGHT', 'ZKOL', 'ZPTN', 'ZRNC', 'ZCND',
'ZDLH', 'ZGZB', 'ZGUR', 'ZHSR', 'ZJPR',
'ZLKW', 'ZBLR', 'ZCHN', 'ZCBM', 'ZHUB',
'ZHYD', 'ZKOC', 'ZAHD', 'ZIND', 'ZMUM',
*********************MODIFICATION BY CHAKRAPANI (ADDITION OF ZVIJ AND ZHWH ) 18.05.2007
'ZNGP', 'ZPNE', 'ZRPR' , 'ZEXP', 'ZDEM','ZVIJ', 'ZHWH','JEX' )
*********************MODIFICATION BY CHAKRAPANI (ADDITION OF ZVIJ AND ZHWH ) 18.05.2007
AND vtweg IN s_vtweg
AND spart IN s_spart
AND fksto NE 'X'.
IF i_vbrk[] IS NOT INITIAL.
SELECT vbeln
posnr
matnr
aubel
fkimg
vrkme
arktx
vgbel
werks
vkgrp
fklmg
volum
vkbur
vtweg_auft
FROM vbrp
INTO TABLE i_report
FOR ALL ENTRIES IN i_vbrk
WHERE vbeln = i_vbrk-vbeln "erdat IN s_date
AND spart IN s_spart
AND vkbur IN s_vkbur
AND vtweg_auft IN s_vtweg.
ENDIF.
ELSEIF r_opt4 EQ 'X' OR
r_opt5 EQ 'X'.
SELECT vbeln
rfbsk
erdat
fkdat
fksto
netwr
fkart
knumv
mwsbk
bzirk
vtweg
spart
FROM vbrk INTO CORRESPONDING FIELDS OF TABLE i_vbrk
FROM vbrk INTO TABLE i_vbrk
FOR ALL ENTRIES IN i_report
WHERE vbeln = i_report-vbeln
AND fkart EQ 'ZEXP'
AND vtweg IN s_vtweg
AND spart IN s_spart
AND fksto NE 'X'.
ENDIF.
SORT i_vbrk BY vbeln ASCENDING.
ENDIF.
change amit by my self may be removed
IF i_report[] IS NOT INITIAL.
REFRESH it_report.
it_report[] = i_report[].
DELETE ADJACENT DUPLICATES FROM it_report COMPARING aubel.
SORT it_report BY aubel.
*select VBAP data
SELECT posnr vbeln matnr werks
kwmeng lgort
FROM vbap
INTO TABLE i_vbap
FOR ALL ENTRIES IN it_report
WHERE vbeln = it_report-aubel.
ENDIF.
change amit by my self may be removed
*select data from VBKD
IF NOT i_vbap[] IS INITIAL.
SELECT vbeln posnr
FROM vbkd
INTO TABLE i_vbkd
FOR ALL ENTRIES IN i_vbap
WHERE vbeln = i_vbap-vbeln.
ENDIF.
SORT i_vbap BY vbeln ASCENDING.
IF i_report[] IS NOT INITIAL.
REFRESH it_report.
it_report[] = i_report[].
DELETE ADJACENT DUPLICATES FROM it_report COMPARING matnr.
SORT it_report BY matnr.
SELECT
matnr
matkl
mtart
labor
bismt
normt
ferth
zeinr
extwg
spart
FROM mara
INTO TABLE i_mara
FOR ALL ENTRIES IN i_report
WHERE matnr = i_report-matnr
AND spart IN s_spart.
ENDIF.
IF NOT i_mara[] IS INITIAL.
SORT i_mara BY matnr.
SELECT matnr
labst
FROM mard
INTO TABLE itab_mard
FOR ALL ENTRIES IN i_mara
WHERE matnr = i_mara-matnr.
ENDIF.
ENDIF.
DATA : it_mara LIKE LINE OF i_mara OCCURS 0.
IF NOT i_mara[] IS INITIAL.
REFRESH it_mara.
it_mara[] = i_mara[].
DELETE ADJACENT DUPLICATES FROM it_mara COMPARING matkl.
SORT it_mara BY matkl.
SELECT matkl wgbez
FROM t023t
INTO TABLE i_t023t
FOR ALL ENTRIES IN it_mara
WHERE matkl = it_mara-matkl.
*T024X
REFRESH it_mara.
it_mara[] = i_mara[].
DELETE ADJACENT DUPLICATES FROM it_mara COMPARING labor.
SORT it_mara BY labor.
SELECT * FROM t024x
INTO TABLE itab_t024x
FOR ALL ENTRIES IN it_mara
WHERE labor = it_mara-labor
AND spras = sy-langu.
ENDIF.
*begin of change amit
LOOP AT i_vbap.
READ TABLE i_mara WITH KEY matnr = i_vbap-matnr.
IF sy-subrc = 0.
*material type & material group
i_vbap-mtart = i_mara-mtart.
i_vbap-matkl = i_mara-matkl.
ENDIF.
MODIFY i_vbap.
ENDLOOP.
*Material Group Description
*end of change amit
IF i_report[] IS NOT INITIAL.
REFRESH it_report.
it_report[] = i_report[].
DELETE ADJACENT DUPLICATES FROM it_report COMPARING vgbel.
SORT it_report BY vgbel.
SELECT vbeln
ean11
volum
lgmng
FROM lips
INTO TABLE i_lips
FOR ALL ENTRIES IN it_report
WHERE vbeln = it_report-vgbel.
ENDIF.
IF i_report[] IS NOT INITIAL.
REFRESH it_report.
it_report[] = i_report[].
SORT it_report BY vgbel.
DELETE ADJACENT DUPLICATES FROM it_report COMPARING vgbel.
IF i_lips[] IS NOT INITIAL.
SELECT vbeln
wadat_ist
traid
bolnr
FROM likp
INTO TABLE i_likp
FOR ALL ENTRIES IN it_report
WHERE vbeln = it_report-vgbel.
ENDIF.
SORT i_lips BY vbeln ASCENDING.
LOOP AT i_lips.
REFRESH t_line.
CLEAR w_tdname.
w_tdname = i_lips-vbeln.
CALL FUNCTION 'READ_TEXT'
EXPORTING
client = sy-mandt
id = 'ZVOW'
language = sy-langu
name = w_tdname
object = 'VBBK'
TABLES
lines = t_line
EXCEPTIONS
id = 1
language = 2
name = 3
not_found = 4
object = 5
reference_check = 6
wrong_access_to_archive = 7
OTHERS = 8.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
LOOP AT t_line.
CONCATENATE i_lips-waybill t_line-tdline INTO i_lips-waybill.
ENDLOOP.
IF sy-subrc EQ 0.
MODIFY i_lips.
ENDIF.
ENDLOOP.
*IF i_report[] IS NOT INITIAL.
REFRESH it_report.
it_report[] = i_report[].
SORT it_report BY aubel.
DELETE ADJACENT DUPLICATES FROM it_report COMPARING aubel.
SELECT a~vbeln
b~name1
b~kunnr
b~regio
b~land1
a~vkgrp
b~niels
b~kukla
b~brsch
a~vkbur
FROM vbak AS a
INNER JOIN kna1 AS b
ON akunnr = bkunnr
INTO TABLE i_kna1
FOR ALL ENTRIES IN i_report
WHERE vbeln = i_report-aubel.
AND land1 = 'IN'.
*endif.
DATA : it_kna1 LIKE LINE OF i_kna1 OCCURS 0.
IF NOT i_kna1[] IS INITIAL.
REFRESH it_kna1.
it_kna1[] = i_kna1[].
SORT it_kna1 BY regio.
DELETE ADJACENT DUPLICATES FROM it_kna1 COMPARING regio.
SELECT spras
land1
bland
bezei FROM t005u
INTO TABLE i_t005u
FOR ALL ENTRIES IN it_kna1
WHERE bland = it_kna1-regio
AND spras = 'EN' AND land1 = 'IN'.
REFRESH it_kna1.
it_kna1[] = i_kna1[].
SORT it_kna1 BY niels.
DELETE ADJACENT DUPLICATES FROM it_kna1 COMPARING niels.
SELECT spras niels bezei FROM tnlst
INTO TABLE i_tnlst
FOR ALL ENTRIES IN it_kna1
WHERE niels = it_kna1-niels
AND spras = sy-langu.
REFRESH it_kna1.
it_kna1[] = i_kna1[].
SORT it_kna1 BY kukla.
DELETE ADJACENT DUPLICATES FROM it_kna1 COMPARING kukla.
SELECT spras kukla vtext FROM tkukt
INTO TABLE itab_tkukt
FOR ALL ENTRIES IN it_kna1
WHERE kukla = it_kna1-kukla
AND spras = sy-langu.
REFRESH it_kna1.
it_kna1[] = i_kna1[].
SORT it_kna1 BY brsch.
DELETE ADJACENT DUPLICATES FROM it_kna1 COMPARING brsch.
SELECT spras brsch brtxt FROM t016t
INTO TABLE itab_t016t
FOR ALL ENTRIES IN it_kna1
WHERE brsch = it_kna1-brsch
AND spras = sy-langu.
REFRESH it_kna1.
it_kna1[] = i_kna1[].
SORT it_kna1 BY vkgrp.
DELETE ADJACENT DUPLICATES FROM it_kna1 COMPARING vkgrp.
SELECT spras vkgrp bezei FROM tvgrt
INTO TABLE itab_tvgrt
FOR ALL ENTRIES IN it_kna1
WHERE vkgrp = it_kna1-vkgrp
AND spras = sy-langu.
ENDIF.
SORT i_kna1 BY vbeln ASCENDING.
IF i_report[] IS NOT INITIAL.
REFRESH it_report.
it_report[] = i_report[].
SORT it_report BY aubel.
DELETE ADJACENT DUPLICATES FROM it_report COMPARING aubel.
SELECT a~vbeln
a~kunnr
b~city1
FROM vbpa AS a
INNER JOIN adrc AS b
ON aadrnr = baddrnumber
INTO TABLE i_adrc
FOR ALL ENTRIES IN it_report
WHERE vbeln = it_report-aubel
AND parvw = 'WE'.
SORT i_adrc BY vbeln ASCENDING.
ENDIF.
DATA : it_adrc LIKE LINE OF i_adrc OCCURS 0.
IF i_adrc[] IS NOT INITIAL.
REFRESH it_adrc.
it_adrc[] = i_adrc[].
SORT it_adrc BY kunnr.
DELETE ADJACENT DUPLICATES FROM it_adrc COMPARING kunnr.
SELECT kunnr name1
FROM kna1
INTO TABLE i_kna2
FOR ALL ENTRIES IN it_adrc
WHERE kunnr = it_adrc-kunnr.
ENDIF.
SELECT a~lifnr
a~vbeln
b~name1
FROM vbpa AS a
INNER JOIN lfa1 AS b
ON alifnr = blifnr
INTO TABLE i_lfa1
FOR ALL ENTRIES IN i_report
WHERE vbeln = i_report-vgbel
AND parvw = 'SP'.
SORT i_lfa1 BY vbeln ASCENDING.
change amit by my self may be removed
IF i_report[] IS NOT INITIAL.
REFRESH it_report.
it_report[] = i_report[].
SORT it_report BY vbeln.
DELETE ADJACENT DUPLICATES FROM it_report COMPARING vbeln.
SELECT exnum
exdat
rdoc
status
FROM j_1iexchdr
INTO TABLE itab_exnum
FOR ALL ENTRIES IN it_report
WHERE rdoc = it_report-vbeln AND status = 'P' OR status = 'C' .
ENDIF.
change amit by my self may be removed
change amit by my self may be removed
IF i_report[] IS NOT INITIAL.
REFRESH it_report.
it_report[] = i_report[].
SORT it_report BY aubel.
DELETE ADJACENT DUPLICATES FROM it_report COMPARING aubel.
SELECT kwmeng
vbeln
lgort
FROM vbap
INTO TABLE itab_qty
FOR ALL ENTRIES IN it_report
WHERE vbeln = it_report-aubel.
ENDIF.
change amit by my self may be removed
SORT itab_qty BY vbeln.
CHECK NOT i_vbrk[] IS INITIAL.
SORT i_report BY vbeln.
DATA : t_vbrk LIKE LINE OF i_vbrk OCCURS 0.
REFRESH t_vbrk.
t_vbrk[] = i_vbrk[].
SORT t_vbrk BY knumv.
DELETE ADJACENT DUPLICATES FROM t_vbrk COMPARING knumv.
SELECT ksteu
knumv
kschl
kbetr
kwert
kposn
kmein
FROM konv
INTO TABLE it_rate
FOR ALL ENTRIES IN t_vbrk
WHERE knumv = t_vbrk-knumv
AND kschl IN ('ZR00', "Basic Price
'ZR01', "Basic Price
'ZR02', "Basic Price
'ZR03', "Basic Price
'ZR04', "Basic Price
'ZR05', "Basic Price
'JEXP', "Excise
'JECS', "ED
'ZG03', "Freight
'ZG04', "Freight
'JCST', "CST
'JLST', "LST
'ZDEV', "Dev Tax
'Z001', "Discount
'Z002', "Discount
'Z003', "Discount
'Z004', "Discount
'Z005', "Discount
'Z006', "Discount
'Z007', "Discount -
Short dump due termination in the program SAPLSNR3
Hi Experts,
While running an IP I am getting short dump, and error analysis says
An ASSIGN statement in the program "SAPLSNR3" contained a field symbol with
length 0. This is not possible. length 0.This is not possible.
can any one exlain why the IP is going for short dump,rectify the error and make the IP to run sucessful.
Regards,
SiddhardhHi Suresh,
Your dump is occuring due to database limit of sql statment (Native SQL) that is generated from your abap sql. The range is killing him (as you already notice).
The thread bellow have some info about this, but the solution can't be applyed to you:
To update 1 field of ztable(60 fields) for 2000 records in minimum DB hit
Maybe you can build some logic to reduce the value of two ranges (also concatenating them). Anyway, due to amount of lines involved (24.500 lines).... I don't think it is possible.
One option is filter the result on ABAP, after your SQL w/o the ranges you may try:
DELETE FROM TABLE i_glpct2
WHERE NOT ( racct IN r_profloss OR racct IN r_balsheet ).
This can raise a performance problem if the number of returned rows from database is to high.
Another option is change your database access. Where the values of the two ranges came from ? database ? If they came from database try to use INNER JOIN, this will solve the problem w/o performance problem.
Best Regards, Fernando Da Ró -
Hi,
please correct me where i went wrong...
RANGES: r_daterange FOR vbak-audat.
RANGES:GRG_DATERANGE FOR VBAK-AUDAT.
PERFORM CHECK_SELECT_OPTIONS USING DATE_FROM
DATE_TO
CHANGING R_DATERANGE[].
if sales order number is the selection criteria
if not salesorder_no is initial.
clear :wa_vbak, wa_vbfa, wa_costlist_in.
refresh:t_vbak, costlist_in.
select avbeln aauart bposnr bnetpr
into table t_vbak
from vbak as a
inner join vbap as b
on avbeln = bvbeln
where a~vbeln = salesorder_no
and a~audat in r_daterange
and a~kunnr = partner_number
and b~abgru NE ' ' .
***INCLUDE /VWNA/LINSD_BAPI_INV_GET_INF01 .
*& Form CHECK_SELECT_OPTIONS
text
-->P_DATE_FROM text
-->P_DATE_TO text
<--P_R_DATERANGE[] text
FORM CHECK_SELECT_OPTIONS USING P_DATE_FROM LIKE VBAK-AUDAT
P_DATE_TO LIKE VBAK-AUDAT
CHANGING PRG_DATERANGE LIKE GRG_DATERANGE[].
DATA: WA_DATERANGE LIKE GRG_DATERANGE.
CLEAR WA_DATERANGE.
REFRESH PRG_DATERANGE.
WA_DATERANGE-SIGN = 'I'.
iF ( P_DATE_FROM IS INITIAL ) AND ( P_DATE_TO IS INITIAL ).
ELSEIF P_DATE_FROM IS INITIAL.
WA_DATERANGE-OPTION = 'LE'.
MOVE P_DATE_TO TO WA_DATERANGE-LOW.
ELSEIF P_DATE_TO IS INITIAL.
WA_DATERANGE-OPTION = 'GE'.
MOVE P_DATE_FROM TO WA_DATERANGE-LOW.
ELSE.
WA_DATERANGE-OPTION = 'BT'.
MOVE P_DATE_FROM TO WA_DATERANGE-LOW.
MOVE P_DATE_TO TO WA_DATERANGE-HIGH.
ENDIF.
APPEND WA_DATERANGE TO PRG_DATERANGE.
clear wa_daterange.
When i execute the code its creating a short dump and the message is :
The current ABAP/4 program attempted to execute an ABAP/4 Open SQL
statement in which the WHERE condition contains an IN itab operator.
The IN itab operator is used with internal tables which
have the following structure:
SIGN(1) OPTION(2) LOW LIKE db_field HIGH LIKE db_field
The OPTION column should contain only one of the following values:
"EQ LE GE CP BT NE LT GT NP NB"
The value " " is not allowed here. Please help me in resolving the error..
Thanks,
ChallaHi
This will happen when P_DATE_FROM IS INITIAL AND P_DATE_TO IS INITIAL.
You are populating the range table with just sign as 'I' and option is not populated.
change your code to:
WA_DATERANGE-SIGN = 'I'.
iF ( P_DATE_FROM IS INITIAL ) AND ( P_DATE_TO IS INITIAL ).
ELSEIF P_DATE_FROM IS INITIAL.
WA_DATERANGE-OPTION = 'LE'.
MOVE P_DATE_TO TO WA_DATERANGE-LOW.
APPEND WA_DATERANGE TO PRG_DATERANGE.
ELSEIF P_DATE_TO IS INITIAL.
WA_DATERANGE-OPTION = 'GE'.
MOVE P_DATE_FROM TO WA_DATERANGE-LOW.
APPEND WA_DATERANGE TO PRG_DATERANGE.
ELSE.
WA_DATERANGE-OPTION = 'BT'.
MOVE P_DATE_FROM TO WA_DATERANGE-LOW.
MOVE P_DATE_TO TO WA_DATERANGE-HIGH.
APPEND WA_DATERANGE TO PRG_DATERANGE.
ENDIF.
*APPEND WA_DATERANGE TO PRG_DATERANGE.
clear wa_daterange.
Regards
Navneet -
Hi
The runtime error is DBIF_RSQL_INVALID_RSQL and the exception is CX_SY_OPEN_SQL_DB.can anyone explain me these errors.
At this select query it going to short dump.Could anyone help me.Its urgent.
Select aaufnr agstrp agsuzp biedd b~iedz into table i_uncount
from afko as a inner join afru as b on aaufnr = baufnr
for all entries in i_ordscp
where aaufnr = i_ordscp-aufnr and bgrund = 'ONS'
and b~stzhl = '0000000'.
Error Analysis:
The data read during a SELECT access could not be inserted into the target field.
Either the conversion is not supported for the target field's type or the target field is too short to accept the value or the data are not in a form that the target field can accept.
The target field is all correct.I've checked it.
Could anyone please help me.Its really urgent.U'll definitely be given points.
Thanks
chandrika.Hi Sarath ,
Please look at the internal table decleration and the sequence of fields in select statement .
What is happening is that the select is tying to place the value of iedd into aufpl as a result of which this incompatibilty occurs.
So you can either user into corresponding-fields or modify the sequence of your internal table.
I would sugges the second option , as first can effect the performance.
So just declare the it as
TYPES:BEGIN OF t_uncont,
aufnr like afko-aufnr,
gstrp like afko-gstrp,
gsuzp like afko-gsuzp,
iedd like afru-iedd,
iedz like afru-iedz,
aufpl like afko-aufpl,
END OF t_uncont.
Regards
Arun -
Short dump while creating a plant.
Dear experts,
Iam getting a short dump whenever I try to create a plant and save it. Iam posting the contents of the dump ... Iam using Ecc 6.0 with Oracle as database. Kindly help me to resolve this ...
Runtime Errors RAISE_EXCEPTION
Date and Time 27.10.2007 17:10:59
Short text
Exception condition "DATA_INCONS_IN_EXIT_MANAGEM" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
A RAISE statement in the program "CL_EXITHANDLER================CP" raised the
exception
condition "DATA_INCONS_IN_EXIT_MANAGEM".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"RAISE_EXCEPTION" " "
"CL_EXITHANDLER================CP" or "CL_EXITHANDLER================CM001"
"GET_INSTANCE"
or
"CL_EXITHANDLER================CP" "DATA_INCONS_IN_EXIT_MANAGEM"
or
"SAPLS_IMG_TOOL_5 " "DATA_INCONS_IN_EXIT_MANAGEM"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "BSLERP"
Network address...... "10.60.0.30"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "4x Intel 801586"
Character length.... 16 Bits
Pointer length....... 32 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "BSLERP"
Database type..... "ORACLE"
Database name..... "BTS"
Database user ID.. "SAPSR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Apr 2 2006 23:08:16"
create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version. "OCI_10103_SHARE "
Patch level. 52
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
Memory consumption
Roll.... 8176
EM...... 17768808
Heap.... 0
Page.... 65536
MM Used. 12293456
MM Free. 1291704
User and Transaction
Client.............. 800
User................ "MURTHYTSN"
Language key........ "E"
Transaction......... "SPRO "
Program............. "CL_EXITHANDLER================CP"
Screen.............. "SAPLSZA1 0201"
Screen line......... 70
Information on where terminated
Termination occurred in the ABAP program "CL_EXITHANDLER================CP" -
in "GET_INSTANCE".
The main program was "SAPLS_IMG_TOOL_5 ".
In the source code you have the termination point in line 36
of the (Include) program "CL_EXITHANDLER================CM001".
Source Code Extract
Line
SourceCde
6
type_ref TYPE REF TO cl_abap_typedescr,
7
class_name TYPE seoclsname,
8
abs_type_classname TYPE string,
9
def_impl TYPE seex_boolean VALUE seex_false,
10
mig_enhspotname TYPE enhspotname,
11
is_impl TYPE enhboolean,
12
mig_badi_name TYPE enhbadiid.
13
14
CALL METHOD cl_exithandler=>get_class_name_by_interface
15
EXPORTING
16
instance = instance
17
IMPORTING
18
class_name = class_name
19
CHANGING
20
exit_name = exit_name
21
EXCEPTIONS
22
no_reference = 1
23
no_interface_reference = 2
24
no_exit_interface = 3
25
data_incons_in_exit_managem = 4
26
class_not_implement_interface = 5
27
OTHERS = 6.
28
CASE sy-subrc.
29
WHEN 1.
30
RAISE no_reference.
31
WHEN 2.
32
RAISE no_interface_reference.
33
WHEN 3.
34
RAISE no_exit_interface.
35
WHEN 4.
>>>>>
RAISE data_incons_in_exit_managem.
37
WHEN 5.
38
RAISE class_not_implement_interface.
39
ENDCASE.
40
41
CONCATENATE '\CLASS=' class_name INTO abs_type_classname.
42
43
Is the given instance initial?
44
IF NOT instance IS INITIAL.
45
CALL METHOD cl_abap_typedescr=>describe_by_object_ref
46
EXPORTING
47
p_object_ref = instance
48
RECEIVING
49
p_descr_ref = type_ref.
50
CHECK type_ref->absolute_name NE abs_type_classname.
51
ENDIF.
52
53
SELECT SINGLE mig_enhspotname mig_badi_name FROM sxs_attr INTO (mig_enhspotname,mig_badi_n
54
WHERE exit_name = exit_name.
55
Contents of system fields
Name
Val.
SY-SUBRC
4
SY-INDEX
1
SY-TABIX
0
SY-DBCNT
0
SY-FDPOS
0
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
ADDR0200
SY-UCOMM
CHCK
SY-TITLE
Edit address: 5002
SY-MSGTY
SY-MSGID
SY-MSGNO
000
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO
0
SY-DATUM
20071024
SY-UZEIT
171059
SY-XPROG
SAPCNVE
SY-XFORM
CONVERSION_EXIT
Active Calls/Events
No. Ty. Program Include Line
Name
43 METHOD CL_EXITHANDLER================CP CL_EXITHANDLER================CM001 36
CL_EXITHANDLER=>GET_INSTANCE
42 FUNCTION SAPLXSZAR ZXSZARU01 25
EXIT_SAPLSZAR_001
41 FUNCTION SAPLSZAR LSZARU01 108
ADDR_REGIONAL_DATA_CHECK
40 FORM SAPLSZA2 LSZA2F20 382
CHECK_ADDR1_DATA
39 FUNCTION SAPLSZA2 LSZA2U02 42
ADDR_CHECK
38 FUNCTION SAPLSZA0 LSZA0U01 79
ADDR_INSERT
37 FORM SAPLSZA1 LSZA1F22 1886
INSERT_ADDRESS_INTO_MEMORY
36 FORM SAPLSZA1 LSZA1F22 2234
PUT_ADDRESS_TO_MEMORY
35 FORM SAPLSZA1 LSZA1I02 409
D0100_OK_CODE
34 FORM SAPLSZA1 LSZA1F03 17
D0100_OK_CODE_WRAPPER
33 MODULE (PAI) SAPLSZA1 LSZA1I02 13
D0100_OK_CODE
32 FUNCTION SAPLSZA1 LSZA1U01 200
ADDR_DIALOG_INTERN
31 FUNCTION SAPLSZA1 LSZA1U05 177
ADDR_DIALOG
30 FORM SAPL0ORG LSVIMF24 292
ADDRESS_MAINTAIN
29 FORM SAPL0ORG LSVIMFX2 577
DETAIL_PAI
28 MODULE (PAI) SAPL0ORG LSVIMIXX 354
DETAIL_PAI
27 FORM SAPL0ORG LSVIMF2L 337
CALL_DYNPRO
26 FUNCTION SAPL0ORG L0ORGU34 35
VIEWPROC_V_T001W
25 FUNCTION SAPL0ORG L0ORGU33 49
VIEWFRAME_V_T001W
24 FUNCTION SAPLSVIM LSVIMU01 138
VIEW_MAINTENANCE
23 FUNCTION SAPLSVIM LSVIMU03 427
VIEW_MAINTENANCE_CALL
22 FORM SAPLS_CUS_ACTIVITY LS_CUS_ACTIVITYF01 358
START_SELECTED_TRANSACTION
21 MODULE (PAI) SAPLDSYH LDSYHI12 56
D1200_PAI_MODULE
20 FUNCTION SAPLDSYH LDSYHU11 70
OUTLINE_LIST_TCODES
19 FUNCTION SAPLS_CUS_ACTIVITY LS_CUS_ACTIVITYU07 103
S_CUS_ACTIVITY_EXECUTE
18 FUNCTION SAPLS_CUS_IMG_ACTIVITY LS_CUS_IMG_ACTIVITYU04 35
S_CUS_IMG_ACTIVITY_EXECUTE
17 FUNCTION SAPLS_IMG_TOOL_1 LS_IMG_TOOL_1U02 63
STREE_EXIT_TO_OBJECT_COBJ
16 FUNCTION SAPLSHI1 LSHI1U16 120
STREE_EXIT_TO_OBJECT
15 FORM SAPLSHI01 LSHI01F0Y 185
EXIT_TO_OBJECT_HC
14 FORM SAPLSHI01 LSHI01F05 70
HANDLE_LINK_CLICK
13 METHOD SAPLSHI01 LSHI01CI1 25
LCL_APPLICATION=>HANDLE_LINK_CLICK
12 METHOD CL_ITEM_TREE_CONTROL==========CP CL_ITEM_TREE_CONTROL==========CM013 53
CL_ITEM_TREE_CONTROL=>HANDLE_NODE_KEY_ITEM_NAME_EVT
11 METHOD CL_ITEM_TREE_CONTROL==========CP CL_ITEM_TREE_CONTROL==========CM00S 60
CL_ITEM_TREE_CONTROL=>HANDLE_EVENT
10 METHOD CL_GUI_COLUMN_TREE============CP CL_GUI_COLUMN_TREE============CM01O 15
CL_GUI_COLUMN_TREE=>HANDLE_EVENT
9 METHOD CL_TREE_CONTROL_BASE==========CP CL_TREE_CONTROL_BASE==========CM017 32
CL_TREE_CONTROL_BASE=>DISPATCH
8 METHOD CL_GUI_CFW====================CP CL_GUI_CFW====================CM001 138
CL_GUI_CFW=>DISPATCH
7 FORM SAPLSHI01 LSHI01F1M 17
EXECUTE_USER_COMMAND_W_EXITS
6 FUNCTION SAPLSHI01 LSHI01U12 30
STREE_BROWSER_PAI
5 MODULE (PAI) SAPLSHI01 LSHI01I01 55
PAI_200
4 FUNCTION SAPLSHI01 LSHI01U07 165
STREE_BROWSER_DYNP_HC
3 FUNCTION SAPLSHI21 LSHI21U03 144
STREE_EXTERNAL_DISPLAY
2 FORM SAPLS_IMG_TOOL_5 LS_IMG_TOOL_5F01 20
DISPLAY_REFERENCE_IMG
1 MODULE (PAI) SAPLS_IMG_TOOL_5 LS_IMG_TOOL_5I01 39
USER_COMMAND_0100
Chosen variables
Name
Val.
No. 43 Ty. METHOD
Name CL_EXITHANDLER=>GET_INSTANCE
EXIT_NAME
22222222222222222222
00000000000000000000
00000000000000000000
00000000000000000000
NULL_INSTANCE_ACCEPTED
2
0
0
0
ACT_IMP_EXISTING
2
0
0
0
INSTANCE
F0000000
F0000000
SY-REPID
CL_EXITHANDLER================CP
4454545444444533333333333333334522222222
3CF589481E4C52DDDDDDDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
%_SPACE
2
0
0
0
CL_DRAGDROP=>COPY
1
0000
1000
CL_WB_REQUEST=>TO_IMMEDIATE_START
SY-SUBRC
4
0000
4000
CL_DRAGDROP=>USEDEFAULTEFFECT
4
0000
4000
SYST-REPID
CL_EXITHANDLER================CP
4454545444444533333333333333334522222222
3CF589481E4C52DDDDDDDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
CL_GUI_CONTROL=>LIFETIME_DEFAULT
0
0000
0000
%_ARCHIVE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ABS_TYPE_CLASSNAME
No. 42 Ty. FUNCTION
Name EXIT_SAPLSZAR_001
IV_NATION
2
0
0
0
X_ACCEPT_ERROR
2
0
0
0
X_ADRC_STRUC
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
X_DIALOG_ALLOWED
X
5
8
0
0
Y_ADRC_STRUC
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
Y_RETCODE
2
0
0
0
ERROR_TABLE[]
Table IT_2299[0x572]
\FUNCTION-POOL=SZA1\FORM=INSERT_ADDRESS_INTO_MEMORY\DATA=ERROR_TABLE[]
Table reference: 208
TABH+ 0(20) = 00000000F8EB2E3D00000000D0000000FB080000
TABH+ 20(20) = 000000003C020000FFFFFFFF04A90100303E0000
TABH+ 40( 8) = 10000000C1248001
store = 0x00000000
ext1 = 0xF8EB2E3D
shmId = 0 (0x00000000)
id = 208 (0xD0000000)
label = 2299 (0xFB080000)
fill = 0 (0x00000000)
leng = 572 (0x3C020000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000317
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
isCtfyAble = 1
>>>>> Shareable Table Header Data <<<<<
tabi = Not allocated
pghook = Not allocated
idxPtr = Not allocated
shmTabhSet = Not allocated
id = Not allocated
refCount = Not allocated
tstRefCount = Not allocated
lineAdmin = Not allocated
lineAlloc = Not allocated
shmVersId = Not allocated
shmRefCount = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook = 0x00000000
collHook = 0x00000000
ext2 = 0xD09AD03C
>>>>> 2nd level extension part <<<<<
tabhBack = 0x30F18E3D
delta_head = 000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x00000000
pb_handle = 0x00000000
SY-XPROG
SAPCNVE
5454454222222222222222222222222222222222
3103E65000000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
SY-XFORM
CONVERSION_EXIT
444545544454545222222222222222
3FE65239FEF5894000000000000000
000000000000000000000000000000
000000000000000000000000000000
%_VIASELSCR
0
4
%_SPACE
2
0
0
0
SY-REPID
SAPLXSZAR
5454555452222222222222222222222222222222
310C83A120000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
LR_EXIT
F0000000
F0000000
%_DUMMY$$
2222
0000
0000
0000
Y_ERROR_TABLE
Table[initial]
No. 41 Ty. FUNCTION
Name ADDR_REGIONAL_DATA_CHECK
IV_NATION
2
0
0
0
X_ACCEPT_ERROR
2
0
0
0
X_ADRC_STRUC
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
X_DIALOG_ALLOWED
X
5
8
0
0
X_T005
800IN IND064 ININD000 00 15500 4111 0000 00 436 664000INDIEN 000 1
3334424443332222222222224444433322233233333223333223333233233322222233333344444423332322222222
8009E09E40640000000000009E9E40000000001550000411100000000004360000006640009E495E00000100000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
Y_ADRC_REGIO
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
Y_ADRC_STRUC
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
Y_RETCODE
2
0
0
0
ERROR_TABLE[]
Table IT_2299[0x572]
SY-XPROG
SAPCNVE
5454454222222222222222222222222222222222
3103E65000000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
LV_MAND
C
422
300
000
000
SY-REPID
SAPLSZAR
5454554522222222222222222222222222222222
310C3A1200000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
%_SPACE
2
0
0
0
%_CX_GRID_ID
1
0000
1000
SYST-REPID
SAPLSZAR
5454554522222222222222222222222222222222
310C3A1200000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
SV_THERE_IS_CUST_EXIT
X
5
8
0
0
T005S
22222222222222
00000000000000
00000000000000
00000000000000
T005
00 000 00 00 00 00 0000 00 000 000
2222222223322222222222222222233322233233233222332223333233222222222222233322222223332222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
CO_ERROR
E
4
5
0
0
No. 40 Ty. FORM
Name CHECK_ADDR1_DATA
SY-MSGV3
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
SY-MSGV4
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
FIELDNAME
222222222222222222222222222222
000000000000000000000000000000
000000000000000000000000000000
000000000000000000000000000000
C_NULL
0
0000
0000
RETURNCODE_ERRORS
2
0
0
0
C_ERROR_OCCURRED
E
4
5
0
0
H_ADRC_STRUC+0(1800)
2020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ADDR1_DATA+460(1800)
2020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
H_ADRC_STRUC
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
C_COMM_TTX
TTX
555
448
000
000
NATION
2
0
0
0
G_ACCEPT_ERROR
2
0
0
0
G_DIALOG_ALLOWED
X
5
8
0
0
T005
800IN IND064 ININD000 00 15500 4111 0000 00 436 664000INDIEN 000 1
3334424443332222222222224444433322233233333223333223333233233322222233333344444423332322222222
8009E09E40640000000000009E9E40000000001550000411100000000004360000006640009E495E00000100000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
TSAD6T
222222222222222222222222222222222222222222222222
000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000
ERROR_TABLE[]
Table IT_2299[0x572]
%_SPACE
2
0
0
0
No. 39 Ty. FUNCTION
Name ADDR_CHECK
ADDRESS_HANDLE
8005002
3333333222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
8005002000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ADDRESS_NUMBER
2222222222
0000000000
0000000000
0000000000
ADDRESS_OBJECT_TYPE
1
3
1
0
0
NATION
2
0
0
0
RETURNCODE
2
0
0
0
ERROR_TABLE[]
Table IT_2299[0x572]
ADDRESS_DATA_1
00000000000000000003XYZ SOLUTIONS LIMITED
3333333333333333333355525445544452444454422222222222222222222222222222222222222222222222222222
0000000000000000000389A03FC549FE30C9D945400000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ADDRESS_DATA_2
0000000000000000
3333333333333333222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ADDRESS_DATA_3
0000000000000000
3333333333333333222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
LV_ADRC_STRUC+0(1800)
2020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ADDRESS_DATA_1+460(1800)
2020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
C_DEFAULT_HANDLE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
SYST-REPID
SAPLSZA2
5454554322222222222222222222222222222222
310C3A1200000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
ERROR_TABLE
000
2222222222222222222223332222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
LV_ADRC_STRUC
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
C_DEFAULT_NATION
2
0
0
0
C_SHOW_ALL
2
0
0
0
C_PERSONAL_ADDRESS
2
3
2
0
0
SY-REPID
SAPLSZA2
5454554322222222222222222222222222222222
310C3A1200000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
ADDRESS_DATA_2+32(1800)
2020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
No. 38 Ty. FUNCTION
Name ADDR_INSERTDear Sunil,
Thanks a lot for your reply. I did search in service market place for notes regarding this problem. However, i could not find possible solutions to resolve this. I will once again search the notes in case if i have missed something. in case, if you come across any solutions to resolve this problem, Kindly post that here and that would be a great help for me.
Regards,
Chaitanya -
RE: Short dump after activation of BADI
Hi all,
We are getting short dumps in all the transactions after activating the BADI 'BADI_LAYER'
We are not able to execute any of the transactions.
The details of runtimeerror
Runtime Errors RAISE_EXCEPTION
Date and Time 30.07.2007 09:58:06
Short text
Exception condition "SINGLE_EXIT_MULTIPLY_ACTIVE" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
A RAISE statement in the program "CL_EXITHANDLER================CP" raised the
exception
condition "SINGLE_EXIT_MULTIPLY_ACTIVE".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"RAISE_EXCEPTION" " "
"CL_EXITHANDLER================CP" or "CL_EXITHANDLER================CM001"
"GET_INSTANCE"
or
"CL_EXITHANDLER================CP" "SINGLE_EXIT_MULTIPLY_ACTIVE"
or
"SAPMF05A " "SINGLE_EXIT_MULTIPLY_ACTIVE"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "sapdevp"
Network address...... "192.168.0.205"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "4x Intel 80686"
Character length.... 16 Bits
Pointer length....... 32 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "SAPDEVP"
Database type..... "ORACLE"
Database name..... "TDV"
Database user ID.. "SAPSR4"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Apr 2 2006 23:08:16"
create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version. "OCI_10103_SHARE "
Patch level. 52
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
Memory consumption
Roll.... 8176
EM...... 6271344
Heap.... 0
Page.... 57344
MM Used. 1728072
MM Free. 360856
User and Transaction
Client.............. 400
User................ "FIUSER01"
Language key........ "E"
Transaction......... "FB50 "
Program............. "CL_EXITHANDLER================CP"
Screen.............. "SAPMF05A 1010"
Screen line......... 7
Information on where terminated
Termination occurred in the ABAP program "CL_EXITHANDLER================CP" -
in "GET_INSTANCE".
The main program was "SAPMF05A ".
In the source code you have the termination point in line 145
of the (Include) program "CL_EXITHANDLER================CM001".
Source Code Extract
Line
SourceCde
115
SELECT SINGLE is_impl FROM badiisimpled INTO is_impl
116
WHERE badi_name = mig_badi_name.
117
IF sy-subrc NE 0.
118
not yet filled
119
is_impl = cl_enh_badi_tool_utilities=>update_badiisimpled( mig_badi_name ).
120
ENDIF.
121
122
IF is_impl = 'X'.
123
ok at least one implementation found
124
act_imp_existing = 'X'.
125
ENDIF.
126
127
ENDIF.
128
ENDIF.
129
ELSE.
130
131
check how many implementations exist for an exit
132
CALL METHOD cl_badi_flt_data_trans_and_db=>act_imps_per_flt_val
133
EXPORTING
134
runtime_call = seex_true
135
exit_name = exit_name
136
EXCEPTIONS
137
singular_exit_multiply_active = 1
138
no_active_implementation = 2
139
only_default_implementation = 3
140
OTHERS = 4.
141
CASE sy-subrc.
142
WHEN 0.
143
act_imp_existing = seex_true.
144
WHEN 1.
>>>>>
RAISE single_exit_multiply_active.
146
WHEN 2.
147
act_imp_existing = seex_false.
148
WHEN 3.
149
act_imp_existing = seex_false.
150
def_impl = seex_true.
151
WHEN 4.
152
RAISE data_incons_in_exit_managem.
153
ENDCASE.
154
155
new parameter considered for performance purposes
156
IF act_imp_existing = seex_true OR
157
def_impl = seex_true OR
158
null_instance_accepted = seex_false.
159
160
ok, then do your job
161
CREATE OBJECT exit TYPE (abs_type_classname).
162
CATCH SYSTEM-EXCEPTIONS move_cast_error = 1.
163
instance ?= exit.
164
ENDCATCH.
Contents of system fields
Name
Val.
SY-SUBRC
1
SY-INDEX
0
SY-TABIX
0
SY-DBCNT
2
SY-FDPOS
1
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
FSKB
SY-UCOMM
SY-TITLE
Enter G/L Account Document: Company Code TJ01
SY-MSGTY
S
SY-MSGID
B!
SY-MSGNO
015
SY-MSGV1
00001140
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO
0
SY-DATUM
20070730
SY-UZEIT
095806
SY-XPROG
SY-XFORM
Active Calls/Events
No. Ty. Program Include Line
Name
5 METHOD CL_EXITHANDLER================CP CL_EXITHANDLER================CM001 145
CL_EXITHANDLER=>GET_INSTANCE
4 METHOD CL_EXIT_MASTER================CP CL_EXIT_MASTER================CM004 2
CL_EXIT_MASTER=>CLASS_CONSTRUCTOR
3 METHOD CL_EX_FI_HEADER_SUB_1300======CP CL_EX_FI_HEADER_SUB_1300======CM003 53
CL_EX_FI_HEADER_SUB_1300=>IF_EX_FI_HEADER_SUB_1300~PUT_DATA_TO_SCREEN_PBO
2 FORM SAPMF05A MF05AF00_D0100_PRE_APPL_SUB_2 50
D0100_PRE_APPL_SUB_PBO
1 MODULE (PBO) SAPMF05A MF05AO00_D0100_PRE_APPL_SUB 10
D0100_PRE_APPL_SUB
Chosen variables
Name
Val.
No. 5 Ty. METHOD
Name CL_EXITHANDLER=>GET_INSTANCE
EXIT_NAME
BADI_LAYER
44445445452222222222
2149FC19520000000000
00000000000000000000
00000000000000000000
NULL_INSTANCE_ACCEPTED
2
0
0
0
ACT_IMP_EXISTING
2
0
0
0
INSTANCE
F0000000
F0000000
%_SPACE
2
0
0
0
RSJOBINFO
00000000000000 ##
2222222222222222222222222222222233333333333333222222222222222222222222222222222200
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
%_DUMMY$$
2222
0000
0000
0000
SEEX_TRUE
X
5
8
0
0
SYST-REPID
CL_EXITHANDLER================CP
4454545444444533333333333333334522222222
3CF589481E4C52DDDDDDDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
<%_TABLE_BADIISIMPLED>
SY-REPID
CL_EXITHANDLER================CP
4454545444444533333333333333334522222222
3CF589481E4C52DDDDDDDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
SY-SUBRC
1
0000
1000
SY-XPROG
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
No. 4 Ty. METHOD
Name CL_EXIT_MASTER=>CLASS_CONSTRUCTOR
%_SPACE
2
0
0
0
SYST-REPID
CL_EXIT_MASTER================CP
4454545544554533333333333333334522222222
3CF5894FD13452DDDDDDDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
SY-REPID
CL_EXIT_MASTER================CP
4454545544554533333333333333334522222222
3CF5894FD13452DDDDDDDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
CL_EXIT_MASTER=>LAYER_EXIT
F0000000
F0000000
%_DUMMY$$
2222
0000
0000
0000
No. 3 Ty. METHOD
Name CL_EX_FI_HEADER_SUB_1300=>IF_EX_FI_HEADER_SUB_1300~PUT_DATA_TO_SCREEN_PBO
IM_BKPF
TJ01 2007SA00000000200707300400000000000000000000000000000000000000
2225433222222222233335433333333333333333333333333333333333333333333333333333333222222222222222
0004A01000000000020073100000000200707300400000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
IM_X_NO_INPUT
2
0
0
0
FLT_VAL
IN
44
9E
00
00
<EXIT_OBJ>-IMP_CLASS
<FLT_CACHE_LINE>-OBJ
|
| F0000000 |
| F0000000 |
| %_DUMMY$$ |
| |
| 2222 |
| 0000 |
| 0000 |
| 0000 |
| ME->INSTANCE_BADI_TABLE |
| Table[initial] |
| <EXIT_OBJ> |
| ??? |
| ?????? |
| ?????? |
| <%_L001> |
| ??? |
| ?????? |
| ?????? |
| RSJOBINFO |
| 00000000000000 ## |
| 2222222222222222222222222222222233333333333333222222222222222222222222222222222200 |
| 0000000000000000000000000000000000000000000000000000000000000000000000000000000000 |
| 0000000000000000000000000000000000000000000000000000000000000000000000000000000000 |
| 0000000000000000000000000000000000000000000000000000000000000000000000000000000000 |
| SY-REPID |
| CL_EX_FI_HEADER_SUB_1300======CP |
| 4454554454444455554533333333334522222222 |
| 3CF58F69F851452F352F1300DDDDDD3000000000 |
| 0000000000000000000000000000000000000000 |
| 0000000000000000000000000000000000000000 |
| <%_L001>-METHOD_NAME |
| ??? |
| ?????? |
| ?????? |
| EXIT_OBJ_TAB |
| Table[initial] |
| SY-SUBRC |
| 1 |
| 0000 |
| 1000 |
| ME |
|
F0000000
C0003000
SXRT_TRUE
X
5
8
0
0
No. 2 Ty. FORM
Name D0100_PRE_APPL_SUB_PBO
*BSEG-STBUK
2222
0000
0000
0000
%_DUMMY$$
2222
0000
0000
0000
SY-REPID
SAPMF05A
5454433422222222222222222222222222222222
310D605100000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
SYST-REPID
SAPMF05A
5454433422222222222222222222222222222222
310D605100000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
KDBTAB-DMBTR
0.0.0.0.0.0.1.
0000000
000000C
%_SPACE
2
0
0
0
KDPTAB-BELNR
2222222222
0000000000
0000000000
0000000000
KDPTAB-GJAHR
0000
3333
0000
0000
0000
KDPTAB-BUZEI
000
333
000
000
000
KDBTAB-XRUND
2
0
0
0
SPACE
2
0
0
0
F05ACTRL
2
0
0
0
SYST
######################################ð#######################################~######### C####
00000000000000000000000000000000000000F0000000000000000000000000000000000000107000000050240000
000000200000000000002010100010000000000000000010400000000000000000000000000080E000200080030100
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000040000000
00000000000000000000000000000000000000000000000000000000000000000000000000000000000000D000000C
BSED
0000000# ############## 0000000000000000
2222222222222222233333330200000000000000223333333333333333222222222222222222222222222222222222
00000000000000000000000000000C000000C000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
000000000000000000000000C0000000C000000C000000000000000000000000000000000000000000000000000000
SY-SUBRC
1
0000
1000
G_APPL_SUB_ACTIVE
X
5
8
0
0
CHAR_X
X
5
8
0
0
%_ARCHIVE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
BKPF-BUKRS
TJ01
5433
4A01
0000
0000
BKPF
TJ01 2007SA00000000200707300400000000000000000000000000000000000000
2225433222222222233335433333333333333333333333333333333333333333333333333333333222222222222222
0004A01000000000020073100000000200707300400000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
G_APPL_SUB_DISABLE
2
0
0
0
T005-INTCA
IN
44
9E
00
00
No. 1 Ty. MODULE (PBO)
Name D0100_PRE_APPL_SUB
C_FIELD_DIALOG_ALL
BUTTON_DIALOG_ALL
4555445444444544422222222222222222222222222222222222222222222222222222222222222222222222222222
2544FEF491CF7F1CC00000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
Internal notes
The termination was triggered in function "ab_jfune"
of the SAP kernel, in line 2561 of the module
"//bas/700_REL/src/krn/runt/abfunc.c#10".
The internal operation just processed is "FUNE".
Internal mode was started at 20070730095806.
Active Calls in SAP Kernel
Lines of C Stack in Kernel (Structure Differs on Each Platform)
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Callstack without Exception:
App : disp+work.EXE (pid=4436)
When : 7/30/2007 9:58:6.359
Threads : 2
Computer Name : SAPDEVP
User Name : SAPServiceTDV
Number of Processors: 4
Processor Type: x86 Family 6 Model 15 Stepping 6
Windows Version : 5.2 Current Build: 3790
State Dump for Thread Id 250c
eax=34d52300 ebx=000003f8 ecx=0001ccc0 edx=34d039e0 esi=000003f8 edi=00000000
eip=7c82ed54 esp=053fceb4 ebp=053fcf24 iopl=0 nv up ei ng nz ac po cy
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00200297
function : KiFastSystemCallRet
7c82ed54 c3 ret
7c82ed55 8da42400000000 lea esp,[esp] ss:053fceb4=7c822124
7c82ed5c 8d642400 lea esp,[esp] ss:6627b4c7=00002100
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
053fcf24 77e6ba42 000003f8 0001d4c0 00000000 053fcf5c ntdll!KiFastSystemCallRet
053fcf38 0100b3aa 000003f8 0001d4c0 00000001 7c38b5c8 kernel32!WaitForSingleObject
053fcf5c 0055b4ac 0055b4e5 7c38b5c8 7c38b5c8 7c38b5c8 disp+work!NTDebugProcess
053fcf60 0055b4e5 7c38b5c8 7c38b5c8 7c38b5c8 01d35ab0 disp+work!NTStack
053fcf7c 0055b519 7c38b5c8 00000000 008536a8 7c38b5c8 disp+work!CTrcStack2
053fcf88 008536a8 7c38b5c8 00000000 005f0059 00300030 disp+work!CTrcStack
053fcfac 008569fa 6d1d037c 0000001b 00000000 01cfc168 disp+work!rabax_CStackSave [abrabax.c (6871)
053fd084 006aaaf4 0134837c 0134835c 00000a01 235f1640 disp+work!ab_rabax
053fd0c0 0067bb56 00000003 34cf5708 00000000 053fd128 disp+work!ab_jfune
053fd128 007af183 00000000 34cf5708 053fd274 34cf8c26 disp+work!ab_extri
053fd13c 00837a37 00000000 34cf7dd6 00596fa0 34cf68b4 disp+work!ab_xevent
053fd148 00596fa0 34cf68b4 000003db 34cf7dd6 00000000 disp+work!ab_dstep
053fd274 00597fa1 34cf5708 34cf5708 053ffd04 00597b13 disp+work!dynpmcal
053fd284 00597b13 34cf5708 34cf5708 00000003 053ffd04 disp+work!dynppbo0
053fd2a0 0056dcf1 34cf5708 0006e768 00000000 0000000c disp+work!dynprctl
053ffd04 00471848 00000013 07de0048 00000001 00494960 disp+work!dynpen00
053ffd14 00494960 0000000c 00000000 00000003 00000002 disp+work!Thdynpen00
053ffee0 00494ee2 00000001 00000000 00000000 00430000 disp+work!TskhLoop
053fff00 00421150 00000000 00000000 7ffd8000 053fff60 disp+work!ThStart
053fff14 00401080 00000003 003f6850 00000001 00000000 disp+work!DpMain
053fff60 011a94a0 00000003 003f6850 003f78f8 01bd5000 disp+work!nlsui_main
053fffc0 77e523e5 00000000 00000000 7ffd8000 88602680 disp+work!wmainCRTStartup
053ffff0 00000000 011a935d 00000000 00905a4d 00000003 kernel32!IsProcessorFeaturePresent
State Dump for Thread Id 27bc
eax=00000001 ebx=00000103 ecx=fffffffe edx=003f01f8 esi=00000000 edi=00000000
eip=7c82ed54 esp=075dfec0 ebp=075dff04 iopl=0 nv up ei pl zr na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000246
function : KiFastSystemCallRet
7c82ed54 c3 ret
7c82ed55 8da42400000000 lea esp,[esp] ss:075dfec0=7c821514
7c82ed5c 8d642400 lea esp,[esp] ss:6845e4d3=50004500
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
075dff04 010f7ffc 000006c0 00000000 00000000 003f77d0 ntdll!KiFastSystemCallRet
075dff84 7c349565 00000000 00000000 00000000 0587ff08 disp+work!SigIMsgFunc
075dffb8 77e6608b 0587ff08 00000000 00000000 0587ff08 MSVCR71!endthreadex
075dffec 00000000 7c3494f6 0587ff08 00000000 00000000 kernel32!GetModuleFileNameA
List of ABAP programs affected
Index
Typ
Program
Group
Date
Time
Size
Lang.
0
Prg
SAPMF05A
0
22.05.2007
11:37:49
1563648
E
1
Prg
SAPMSSYD
0
10.01.2007
12:33:28
21504
E
2
Prg
SAPFSYSCALLS
0
09.09.2004
14:18:32
8192
E
3
Typ
TFDIR
0
13.02.2005
17:31:57
3072
4
Prg
SAPLAPAR_EBPP_SERVICES
4
03.01.2007
11:23:55
114688
E
5
Typ
T042ZEBPP
0
08.01.2002
14:42:24
2048
6
Typ
T020
0
24.02.1999
03:17:19
3072
7
Typ
RFOPT2
0
11.12.2003
15:00:17
5120
8
Prg
SAPFF001
0
22.05.2007
11:37:49
195584
E
9
Typ
SWOTOBJID
0
04.05.1995
15:20:52
2048
10
Prg
SAPLSWOR
10
10.01.2007
12:33:34
292864
E
11
Typ
TFBUF
0
30.11.1998
22:08:34
3072
12
Typ
ACC_KONTEXT
0
08.01.2003
17:30:26
3072
13
Typ
BKPF
0
13.03.2006
11:01:29
18432
14
Prg
SAPLFACSCORE
14
01.12.2006
22:00:12
13312
E
15
Typ
T001
0
25.08.2005
22:03:13
13312
16
Prg
SAPLACHD
16
03.01.2007
11:23:55
51200
E
17
Prg
SAPFSPOR
0
09.09.2004
14:18:32
15360
E
18
Prg
SAPLSCNT
18
18.02.2005
14:16:06
30720
E
19
Typ
DYCBOX
0
20.08.1998
11:16:53
3072
20
Prg
SAPLSVSM
20
18.02.2005
14:16:06
27648
E
21
Prg
SAPLSGUI
21
10.01.2007
12:33:33
82944
E
22
Prg
SAPLSTTM
22
05.07.2005
13:10:18
69632
E
23
Prg
SAPLSBDC
23
05.07.2005
13:10:18
44032
E
24
Prg
CL_DATAPROVIDER===============CP
24
28.02.2005
21:00:46
49152
E
25
Prg
%_CCNTL
24
18.02.2005
14:15:08
15360
E
26
Typ
OBJ_RECORD
0
14.02.1998
08:30:43
2048
27
Prg
SAPLSTUP
27
08.03.2005
19:04:31
73728
E
28
Prg
SAPLCNDP
28
01.12.2006
22:04:33
193536
E
29
Prg
SAPSHDTV
18
05.01.2005
16:26:16
33792
E
30
Typ
SHDSTU
0
14.12.1998
23:15:34
2048
31
Typ
SHDSTCIU
0
14.12.1998
23:15:34
2048
32
Prg
SAPFGUICNTL
0
18.02.2005
14:15:08
24576
E
33
Prg
SAPLOLEA
33
05.07.2005
13:10:18
96256
E
34
Prg
SAPLSFES
34
10.01.2007
13:26:20
256000
E
35
Prg
SAPLSPLUGIN
35
09.09.2004
14:18:36
8192
E
36
Typ
ARFCRDATA
0
13.02.2005
18:20:24
7168
37
Prg
SAPLGRFC
37
13.02.2005
18:20:25
16384
E
38
Typ
SWCBCONT
0
15.11.2000
17:55:11
3072
39
Typ
OLE_VERBS
0
04.04.1995
16:02:20
2048
40
Typ
OLE_PA
0
04.04.1995
16:02:19
2048
41
Typ
ACGL_HEAD
0
11.12.2003
14:59:21
8192
42
Typ
RF05A
0
11.04.2005
11:50:21
38912
43
Typ
TCURC
0
01.12.1999
12:14:40
2048
44
Prg
SAPLFAGL_ACTIVATION_SERVICES
44
30.04.2007
17:00:55
45056
E
45
Prg
SAPLSTR9
45
09.05.2006
10:39:47
39936
E
46
Prg
CONTEXT_X_TR_SYS_PARAMS
45
09.05.2006
10:39:47
40960
E
47
Typ
TCONT
0
09.09.2004
14:18:43
2048
48
Typ
CONTEXTB
0
09.09.2004
14:15:52
6144
49
Typ
FAGL_ACTIVEC
0
19.08.2004
16:55:10
5120
50
Typ
FAGL_CHECK_SETUP
0
11.12.2003
15:01:05
2048
51
Prg
SAPLSHD0
51
03.01.2007
06:52:22
232448
E
52
Prg
SAPLBFFM3
52
10.01.2007
13:15:21
169984
E
53
Typ
OFIWA
0
15.04.1998
00:11:05
2048
54
Typ
FTEXTS
0
20.08.2001
12:13:26
3072
55
Prg
SAPLITSR
55
10.01.2007
14:23:52
107520
E
56
Typ
FMRFC
0
13.08.1997
12:32:59
2048
57
Typ
TBE01
0
20.01.2003
16:41:38
2048
58
Typ
TBE31
0
03.09.1997
03:01:11
2048
59
Typ
TBE31
0
03.09.1997
03:01:11
2048
60
Typ
TBE11
0
03.09.1997
03:01:06
2048
61
Prg
CONTEXT_X_SP_INFO
55Hello Sowmya
The BAdI BADI_LAYER is not defined for <b>Multiple-Use</b> (see checkbox on tabstrip <i>Attributes</i>).
Apparently you have created <i>several </i>implementation of this BAdI and activated <i>several </i>(at least 2) of these implementations.
If you inactivate all except a single implementation the BAdI (and all transactions using this BAdI) should work again.
Regards
Uwe -
BCS Release Request Short dump
Hello,
I'm trying to release my costumizing request, that contains the SEM-BCS configuration, although i'm getting a short-dump.
The description is as follows:
Short text
Access via 'NULL' object reference not possible.
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_UG_MD_TR_METHOD_EXPORT=====CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
You attempted to use a 'NULL' object reference (points to 'nothing')
access a component (variable: " ").
An object reference must point to an object (an instance of a class)
before it can be used to access components.
Either the reference was never set or it was set to 'NULL' using the
CLEAR statement.
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"OBJECTS_OBJREF_NOT_ASSIGNED" " "
"CL_UG_MD_TR_METHOD_EXPORT=====CP" or "CL_UG_MD_TR_METHOD_EXPORT=====CM003"
"UGMD_EXTRACT_SID_2"
Information on where terminated
Termination occurred in the ABAP program "CL_UG_MD_TR_METHOD_EXPORT=====CP" -
in "UGMD_EXTRACT_SID_2".
The main program was "RDDM0001 ".
In the source code you have the termination point in line 62
of the (Include) program "CL_UG_MD_TR_METHOD_EXPORT=====CM003".
Source Code Extract
Line SourceCde
32 FIELD-SYMBOLS <lt_table> TYPE INDEX TABLE.
33 FIELD-SYMBOLS <ld_fsid> TYPE ug_sid.
34 FIELD-SYMBOLS <ld_vsid> TYPE ug_sid.
35 * FIELD-SYMBOLS <lt_target> TYPE ANY TABLE.
36
37 ASSIGN io_itab->rd_wa->* TO <ls_wa>.
38 IF i_value_sid IS NOT INITIAL.
39 ASSIGN COMPONENT i_value_sid
40 OF STRUCTURE <ls_wa>
41 TO <ld_vsid>.
42 CHECK sy-subrc = 0.
43 ELSE.
44 CREATE DATA lr_sid.
45 ASSIGN lr_sid->* TO <ld_vsid>.
46 CLEAR <ld_vsid>.
47 ENDIF.
48
49 IF NOT i_fieldname_sid IS INITIAL. "Start hah160603.1
50 ASSIGN COMPONENT i_fieldname_sid
51 OF STRUCTURE <ls_wa>
52 TO <ld_fsid>.
53 CHECK sy-subrc = 0.
54 ELSE.
55 CALL METHOD ugmd_get_fieldname_to_table
56 EXPORTING
57 i_tabname = i_datainfo-tabname
58 IMPORTING
59 e_fieldname = ld_fieldname.
60 lo_fieldname = cl_ug_md_fieldname=>if_ug_md_fieldname~get_instance(
61 ld_fieldname ).
62 >>>>> ld_fieldname_sid_fix = lo_fieldname->ds_data-sid.
63 ASSIGN ld_fieldname_sid_fix TO <ld_fsid>.
64 ENDIF. "End hah160603.1
65
Contents of system fields
Name Val.
SY-SUBRC 0
SY-INDEX 1
SY-TABIX 0
SY-DBCNT 0
SY-FDPOS 0
SY-LSIND 1
SY-PAGNO 0
SY-LINNO 1
SY-COLNO 1
SY-PFKEY TDR_FULL
SY-UCOMM REFR
SY-TITLE Transport organizer: ordens
SY-MSGTY I
SY-MSGID FINB_TR
SY-MSGNO 009
SY-MSGV1 &
SY-MSGV2 &
SY-MSGV3
SY-MSGV4
SY-MODNO 0
SY-DATUM 20080904
SY-UZEIT 200112
SY-XPROG SAPLSYST
SY-XFORM SYSTEM_HOOK_OPEN_DATASET
If someone have gone trough a similar experience, or have any tip of how to solve this issue, i'd apreciate a comment.
Will award points for valuable help.
Thank youHi Ricardo,
You tried to transport the BCS' configuration, right?
If in the request was the full set of settings from the start of the project, the it will definitely fail.
There are some restrictions in BCS transport. See, for example the OSS Note #627924 - 'Restrictions with transport in BW-based SEM-BCS'. It particularly says:
"For the initial system setup, and after substantial changes in the data model, you should transport the Customizing by means of manually created transport requests. We advise you not to use the automatic recording of all Customizing settings during the first implementation phase in the development system and not to use this request for the structure of the test and productive systems.
During the transport of a new consolidation area, the following settings should be transported in the following sequence:
1. Data basis
2. Consolidation area
3. Special versions
After the import of the data basis and the consolidation area, these settings should be checked in the target system. In particular, the RFC destination, the InfoCubes and ODS objects, as well as the InfoObjects. Note that RFC destinations, InfoCubes, ODS objects, virtual cubes and InfoObjects cannot be transported from the consolidation workbench with the transport functions. For instance, you have to transport and activate the InfoCubes and InfoObjects using the BW."
I usually transport the BCS setting in a little transport requests in this order:
- all BW objects and settings
- data basis (with source DB)
- cons area
- special versions
- versions
- master data
...etc.
Hope this helps. -
Getting Short dump When Executing MIGO: SYNTAX_ERROR
Please Help,
I am getting this dump, when i hit MIGO transaction
Runtime Errors SYNTAX_ERROR
Date and Time 10.12.2008 08:28:03
Short text
Syntax error in program "MB_MIGO_BADI==================CP ".
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_EX_MB_MIGO_BADI============CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
"MB_MIGO_BADI==================CP " in include
"MB_MIGO_BADI==================CM000 " in
line 0:
"The specified type cannot be converted into the target variables."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "CL_EX_MB_MIGO_BADI============CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "MB_MIGO_BADI==================CP
You can also perform the syntax check from the ABAP Editor.
If the problem persists, proceed as follows:
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
The following syntax error was found in the program
MB_MIGO_BADI==================CP :
"The specified type cannot be converted into the target variables."
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "DMATE"
Network address...... "140.1.1.141"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "4x AMD64 Level"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 1
Shortdump setting.... "full"
Database server... "dmate"
Database type..... "ADABAS D"
Database name..... "AD0"
Database user ID.. "SAPAD0"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Jun 23 2008 00:09:46"
create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version. "SQLDBC 7.6.0.018 CL 119055 "
Patch level. 166
Patch text.. " "
Database............. "MaxDB 7.6, MaxDB 7.7"
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0"
Memory consumption
Roll.... 16192
EM...... 8379680
Heap.... 0
Page.... 40960
MM Used. 1627776
MM Free. 2559440
User and Transaction
Client.............. 040
User................ "LAKSHMI"
Language key........ "E"
Transaction......... "MIGO "
Transactions ID..... "EE72C6DDC96BF1F99FA4001143E563CA"
Program............. "CL_EX_MB_MIGO_BADI============CP"
Screen.............. "SAPLMIGO 0001"
Screen line......... 2
Information on where terminated
Termination occurred in the ABAP program "CL_EX_MB_MIGO_BADI============CP" -
in "IF_EX_MB_MIGO_BADI~INIT".
The main program was "SAPLMIGO ".
In the source code you have the termination point in line 1
of the (Include) program "CL_EX_MB_MIGO_BADI============CM001".
Source Code Extract
Line SourceCde
>>>>> method IF_EX_MB_MIGO_BADI~INIT.
2 CLASS CL_EXIT_MASTER DEFINITION LOAD.
3
4 DATA l_badi TYPE REF TO MB_MIGO_BADI.
5
6
7
8
9
10 TRY.
11
12 GET BADI l_badi
13 CONTEXT me.
14
15 CALL BADI l_badi->INIT
16
17 CHANGING
18 CT_INIT = CT_INIT.
19
20
Contents of system fields
Name Val.
SY-SUBRC 0
SY-INDEX 0
SY-TABIX 1
SY-DBCNT 1
SY-FDPOS 1
SY-LSIND 0
SY-PAGNO 0
SY-LINNO 1
SY-COLNO 1
SY-PFKEY
SY-UCOMM
SY-TITLE
SY-MSGTY S
SY-MSGID VBDOCUBATCH
SY-MSGNO 001
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO 0
SY-DATUM 20081210
SY-UZEIT 082802
SY-XPROG
SY-XFORM
Active Calls/Events
No. Ty. Program Include Line
Name
4 METHOD CL_EX_MB_MIGO_BADI============CP CL_EX_MB_MIGO_BADI============CM001 1
CL_EX_MB_MIGO_BADI=>IF_EX_MB_MIGO_BADI~INIT
3 METHOD SAPLMIGO LMIGOGL2 54
LCL_MIGO_GLOBALS=>CLASS_CONSTRUCTOR
2 FORM SAPLMIGO LMIGOIN1 11
INITIALIZATION
1 MODULE (PBO) SAPLMIGO LMIGOPBO 11
PBO_INITILIZATION
Chosen variables
Name
Val.
No. 4 Ty. METHOD
Name CL_EX_MB_MIGO_BADI=>IF_EX_MB_MIGO_BADI~INIT
CT_INIT
Table[initial]
%_DUMMY$$
2222
0000
0000
0000
SYST-REPID
CL_EX_MB_MIGO_BADI============CP
4454554454444544443333333333334522222222
3CF58FD2FD97FF2149DDDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
SY-SUBRC
0
0000
0000
No. 3 Ty. METHOD
Name LCL_MIGO_GLOBALS=>CLASS_CONSTRUCTOR
SY-REPID
SAPLMIGO
5454444422222222222222222222222222222222
310CD97F00000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
LCL_MIGO_GLOBALS=>CNTL_ERROR
2
0
0
0
ABAP_FALSE
2
0
0
0
SYST-REPID
SAPLMIGO
5454444422222222222222222222222222222222
310CD97F00000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
GOSEARCH_PO
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
TEXT-220
Dest
46772222
45340000
00000000
00000000
%_SPACE
2
0
0
0
%_TAG*TS_GOITEM
<initial>
<initial>
<initial>
X
X
5
8
0
0
LCL_MIGO_GLOBALS=>IF_BADI
F0000000
70008000
%_FL2*TV_GOFREIGHT
<initial>
<initial>
<initial>
%_PRINT
000 0###
2222333222222222222222222222222222222222222222222222222222222222222222222222222222222222223000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
LCL_MIGO_GLOBALS=>T_BADI
Table[initial]
/SPE/CL_INB_ACTION_INFO=>C_DIALOG_MIGO
SCREEN
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
OREF_TITLEBAR
F0000000
F0000000
L_BADIS_1
0
0000
0000
SY-MSGID
VBDOCUBATCH
54444544544222222222
624F3521438000000000
00000000000000000000
00000000000000000000
OREF_TIP
F0000000
F0000000
TV_GOSERIAL-CX
<initial>
<initial>
<initial>
SPACE
2
0
0
0
SY-MSGNO
001
333
001
000
000
No. 2 Ty. FORM
Name INITIALIZATION
OREF_ARCH
F0000000
F0000000
LCL_MIGO_GLOBALS=>KERNEL
F0000000
D0002000
%_CX_TABLEVIEW_VERSION
0
3
0
0
0
GODEFAULT-DEF_XBOM
2
0
0
0
LCL_MIGO_GLOBALS=>KERNEL->C_REFDOCTYPE_MATDOC
MAT
445
D14
000
000
No. 1 Ty. MODULE (PBO)
Name PBO_INITILIZATION
GOITEM-UMWRK
2222
0000
0000
0000
GOITEM-UMNAME1
222222222222222222222222222222
000000000000000000000000000000
000000000000000000000000000000
000000000000000000000000000000
Internal notes
The termination was triggered in function "ab_genprog"
of the SAP kernel, in line 1551 of the module
"//bas/700_REL/src/krn/runt/abgen.c#10".
The internal operation just processed is "CPOP".
Internal mode was started at 20081210082802.
Program name.........: "MB_MIGO_BADI==================CP ".
Error message........: "The specified type cannot be converted into the target
variables.".
Active Calls in SAP Kernel
Lines of C Stack in Kernel (Structure Differs on Each Platform)
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Callstack without Exception:
App : disp+work.EXE (pid=5776)
When : 12/10/2008 8:28:3.84
Threads : 2
Computer Name : DMATE
User Name : SAPServiceAD0
Number of Processors: 4
Processor Type: EM64T Family 15 Model 4 Stepping 1
Windows Version : 5.2 Current Build: 3790
State Dump for Thread Id 14f0
FramePtr ReturnAd Param#1 Function Name
0000000007eb8800 0000000077d7047f 00000000411b4070 ntdll!NtWaitForSingleObject
0000000007eb88a0 000000000173b1d1 000000000000042c kernel32!WaitForSingleObjectEx
0000000007eb8af0 00000000006179c5 0000000000000001 disp+work!NTDebugProcess [ntstcdbg.c (501)]
0000000007eb8b20 0000000000b05d9c 0000000000000001 disp+work!CTrcStack [dptstack.c (182)]
0000000007eb8b70 0000000000b0afc0 0000000000000001 disp+work!rabax_CStackSave [abrabax.c (7093)]
0000000007eb9550 0000000000a51c94 0000000001d12320 disp+work!ab_rabax [abrabax.c (1231)]
0000000007ebc220 00000000007f753a 0000000000000001 disp+work!ab_genprog [abgen.c (1555)]
0000000007ebc2f0 00000000007f7dc8 00000000ffffffff disp+work!newload [abload1.c (336)]
0000000007ebc350 00000000007f7e8e 0000000000000056 disp+work!ab_LoadProgOrTrfo [abload1.c (160)]
0000000007ebc380 00000000007bc84d 000007fe725a5f70 disp+work!ab_LoadProg [abload1.c (78)]
0000000007ebc450 00000000007be91a 00002a441022f402 disp+work!LoadGlobalClass [abobject.c (943)]
0000000007ebc4a0 00000000007c1bdd 0000000000000000 disp+work!ab_FillCfix [abobject.c (1603)]
0000000007ebc580 000000000083ae52 0000000000000000 disp+work!ab_jaboo [abobject.c (2248)]
0000000007ebc700 0000000000a1ccb7 000000000000000d disp+work!ab_extri [abextri.c (554)]
0000000007ebc750 0000000000ad50ac 000000000000000d disp+work!ab_xevent [abrunt1.c (281)]
0000000007ebc7e0 0000000000679328 000000000000000d disp+work!ab_dstep [abdynpro.c (492)]
0000000007ebc960 000000000067d02d 000007fe725d6f20 disp+work!dynpmcal [dymainstp.c (2396)]
0000000007ebc9f0 000000000067ca2a 0000000000000000 disp+work!dynppbo0 [dymainstp.c (543)]
0000000007ebcaa0 00000000006395c5 0000000000000000 disp+work!dynprctl [dymainstp.c (360)]
0000000007ebfc30 00000000004dbc4c 000000000000000c disp+work!dynpen00 [dymain.c (1646)]
0000000007ebfeb0 000000000042f096 0000000007f62ff0 disp+work!TskhLoop [thxxhead.c (4538)]
0000000007ebfee0 000000000040108d ffffffff00000003 disp+work!DpMain [dpxxdisp.c (1136)]
0000000007ebff10 00000000019e84b1 0000000000000000 disp+work!nlsui_main [thxxanf.c (84)]
0000000007ebff70 0000000077d5966c 0000000000000000 disp+work!wmainCRTStartup [crtexe.c (498)]
0000000007ebffa0 0000000000000000 00000000019e8340 kernel32!BaseProcessStart
State Dump for Thread Id b94
FramePtr ReturnAd Param#1 Function Name
000000000c9dfe40 0000000077d5f651 0000000000000000 ntdll!NtFsControlFile
000000000c9dfeb0 00000000018ce23f fffffffffffffffe kernel32!ConnectNamedPipe
000000000c9dff40 000007ff7fc411c4 0000000000000000 disp+work!SigIMsgFunc [signt.c (679)]
000000000c9dff70 0000000077d6b69a 0000000077d6b660 msvcrt!endthreadex
000000000c9dffa0 0000000000000000 0000000000000000 kernel32!BaseThreadStart
List of ABAP programs affected
Index Typ Program Group Date Time Size Lang.
0 Prg SAPLMIGO 0 04.05.2008 12:54:34 1561600 E
1 Prg SAPMSSYD 0 25.02.2008 17:02:32 21504 E
2 Prg SAPFSYSCALLS 0 09.09.2004 14:18:32 7168 E
3 Prg CL_MMIM_USERDEFAULTS==========CP 3 06.05.2002 10:42:38 21504 E
4 Typ ESDUS 0 01.03.1999 13:36:04 2048
5 Typ GOHEAD 0 07.02.2006 10:07:36 11264
6 Typ MKPF 0 25.08.2005 22:02:19 7168
7 Typ KBEFU 0 16.03.2008 17:46:49 6144
8 Typ LFA1 0 16.03.2008 17:47:20 22528
9 Typ MIGO_CUST_ACTION 0 30.11.1999 10:19:14 3072
10 Typ MIGO_CUST_REFDOC 0 30.11.1999 10:19:14 2048
11 Typ X031L 0 05.07.2005 13:10:15 6144
12 Prg SAPLSDIFRUNTIME 12 19.11.2006 16:35:34 96256 E
13 Typ DFIES 0 28.12.2004 17:06:45 10240
14 Prg SAPLSDNT 14 09.03.2008 19:02:04 219136 E
15 Prg SAPLSUGS 15 31.03.2006 11:23:11 47104 E
16 Prg SAPLV01D 16 24.03.2008 17:03:30 40960 E
17 Typ IWRKZ 0 04.04.1995 15:56:46 2048
18 Typ TCUCH 0 07.01.2002 15:50:54 3072
19 Typ TCUBN 0 07.01.2002 15:50:53 2048
20 Typ TCUWS 0 13.08.1997 13:57:58 2048
21 Typ TCUDRV 0 07.01.2002 15:50:54 2048
22 Prg SAPLVBDOCUBATCH_BF 22 16.01.2004 14:28:56 10240 E
23 Typ TCUDB 0 14.01.2004 10:05:59 2048
24 Prg CL_GUI_CFW====================CP 24 28.02.2005 21:03:09 168960 E
25 Prg CL_GUI_PROPS_CONSUMER=========CP 25 18.03.2008 13:25:33 29696 E
26 Prg %_CCNTL 25 18.02.2005 14:15:08 15360 E
27 Prg SAPLTHFB 27 18.03.2008 13:24:52 394240 E
28 Typ EUDB 0 06.11.2003 20:28:08 8192
29 Typ TCURM 0 01.03.2005 10:56:26 5120
30 Prg CL_EXITHANDLER================CP 30 18.03.2008 13:11:35 30720 E
31 Prg SAPLSEXV 31 18.03.2008 13:12:58 117760 E
32 Typ SXS_ATTR 0 07.02.2006 10:09:24 5120
33 Typ BADIISIMPLED 0 19.05.2005 19:10:34 3072
34 Prg CL_ENH_BADI_TOOL_UTILITIES====CP 34 17.03.2008 11:03:36 13312 E
35 Typ BADI_MAIN 0 08.12.2004 18:01:11 2048
36 Typ BADI_IMPL 0 09.12.2004 19:05:43 3072
37 Typ TADIR 0 07.02.2006 10:08:38 5120
38 Prg CL_SWITCH=====================CP 38 17.03.2008 11:13:47 19456 E
39 Typ SFW_PACKAGE 0 07.03.2008 12:18:16 2048
40 Prg CL_ABAP_SWITCH================CP 40 14.10.2006 15:40:30 33792 E
41 Prg SAPLPA_PACKAGE_SERVICES 41 18.03.2008 13:12:54 152576 E
42 Typ TDEVC 0 08.12.2004 18:02:41 6144
43 Prg CL_EX_MB_MIGO_BADI============CP 43 05.12.2008 17:09:58 30720 E
44 Prg IF_EX_MB_MIGO_BADI============IP 30 19.05.2005 19:30:39 14336 E
45 Typ SYST 0 09.09.2004 14:18:12 31744
46 Typ GOSEARCH_PO 0 20.07.2001 19:17:34 4096
47 Prg /SPE/CL_INB_ACTION_INFO=======CP 47 24.03.2008 20:30:06 20480 E
48 Prg /SPE/IF_CONST=================IP 47 14.10.2006 18:49:02 7168 E
49 Typ GODEFAULT 0 14.01.2004 10:04:46 5120
50 Typ GOITEM 0 07.02.2006 10:07:36 65536
Directory of Application Tables
Name Date Time Lngth
Val.
Program SAPLMIGO
SYST . . : : 00004612
\0\0\0\0\x0001\0\x0370\0\0\0\0\0\0\0\0\0\0\0\0\0\x0001\0
GOITEM . . : : 00005524
00000000000000000000
GOSEARCH_PO . . : : 00000492
GODEFAULT . . : : 00000220
Program SAPLV01D
TCUCH . . : : 00000122
0401100020061029095148ANOOPJ 00000000000000
TCUWS . . : : 00000060
040020061227101454CONSULTANT
TCUBN . . : : 00000060
040020061227101454CONSULTANT
TCUDRV . . : : 00000064
00000000000000
Program CL_GUI_PROPS_CONSUMER=========CP
EUDB . . : : 00004068
%CAA72C6DDAD55F1179FA4001143E563CA \0\0\0
ABAP Control Blocks (CONT)
Index Name Fl PAR0 PAR1 PAR2 PAR3 PAR4 PAR5 PAR6 Source Code Line
94 BRAX 01 FFEB CL_EX_MB_MIGO_BADI============CM001 15
95 CLEA 00 0020 CL_EX_MB_MIGO_BADI============CM001 15
96 EXCP 08 0000 CL_EX_MB_MIGO_BADI============CM001 22
97 BRAX 00 0005 CL_EX_MB_MIGO_BADI============CM001 22
98 EXCP 00 0007 CL_EX_MB_MIGO_BADI============CM001 22
99 BRAX 00 0003 CL_EX_MB_MIGO_BADI============CM001 22
100 EXCP 07 0000 CL_EX_MB_MIGO_BADI============CM001 22
101 BRAX 00 0001 CL_EX_MB_MIGO_BADI============CM001 23
102 EXCP 0B 0000 CL_EX_MB_MIGO_BADI============CM001 23
103 METH 01 0000 0000 0000 0000 0000 0000 0000 CL_EX_MB_MIGO_BADI============CM001 24
107 -
00 0000 CL_EX_MB_MIGO_BADI============CM001 24
108 ABOO 02 0000 0005 0000 CL_EX_MB_MIGO_BADI============CM001 1
>>>>> CPOP 00 0000 CL_EX_MB_MIGO_BADI============CM001 1
111 -
00 0000 CL_EX_MB_MIGO_BADI============CM001 1
112 METH 04 0000 0005 0002 0000 0003 0000 0000 CL_EX_MB_MIGO_BADI============CM002 1
116 PAR2 04 0000 C000 0000 CL_EX_MB_MIGO_BADI============CM002 1
118 PAR2 04 0000 C001 0000 CL_EX_MB_MIGO_BADI============CM002 1
120 PAR2 14 0000 C002 0000 CL_EX_MB_MIGO_BADI============CM002 1
122 PAR2 14 0000 C003 0000 CL_EX_MB_MIGO_BADI============CM002 1
124 PAR2 14 0000 C004 0000 CL_EX_MB_MIGO_BADI============CM002 1Hai,
Seems to be problem with the Program.
Please check the point 'What Happened' in the dump for more details.
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_EX_MB_MIGO_BADI============CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
"MB_MIGO_BADI==================CP " in include
"MB_MIGO_BADI==================CM000 " in
line 0:
"The specified type cannot be converted into the target variables."
Error in the ABAP Application Program
The current ABAP program "CL_EX_MB_MIGO_BADI============CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "MB_MIGO_BADI==================CP
You can also perform the syntax check from the ABAP Editor.
Take help from a ABAP consultant and try to check the syntax of the Program.
If you have access even you can check the syntax of the specified program from SE38.
Goto SE38 and put the program name and select 'Source code' and press F8, IN THE SOURCE CODE PAGE, press control+F2 and check whether there is any problem with the syntax or not.
If you find any take help from ABAP consultants.
Hope this helps.
Regards,
Yoganand.V -
Short dump when expand info provide
Dear all,
I have 0GL_ACOOUNT info object that act as a master data.
the problem is when I want to expand at the info provider instantly create short dump
the overview of the short dump is :
Runtime Errors ASSERTION_FAILED
Date and Time 12.08.2009 10:08:16
Short text
The ASSERT condition was violated.
What happened?
In the running application program, the ASSERT statement recognized a
situation that should not have occurred.
The runtime error was triggered for one of these reasons:
- For the checkpoint group specified with the ASSERT statement, the
activation mode is set to "abort".
- Via a system variant, the activation mode is globally set to "abort"
for checkpoint groups in this system.
- The activation mode is set to "abort" on program level.
- The ASSERT statement is not assigned to any checkpoint group.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Information on where terminated
Termination occurred in the ABAP program "CL_RSAWBN_OBJ_IOBJ_DATA=======CP" -
in "GET_TRFN_AWBSUBOBJ".
The main program was "RSAWBN_START ".
In the source code you have the termination point in line 23
of the (Include) program "CL_RSAWBN_OBJ_IOBJ_DATA=======CM005".
Source Code Extract
Line SourceCde
1 METHOD get_trfn_awbsubobj .
2
3 DATA: l_tranid TYPE rstranid,
4 l_s_source TYPE rstran_s_tlogo,
5 l_s_target TYPE rstran_s_tlogo,
6 l_objvers TYPE rsobjvers.
7
8 l_tranid = i_objnm.
9 l_objvers = rs_c_objvers.
10
11 * get the source and target for the tranid
12 WHILE l_s_source IS INITIAL OR l_s_target I
13 TRY.
14 cl_rstran_stat=>get_objects(
15 EXPORTING
16 i_tranid = l_tranid
17 i_objvers = l_objvers
18 IMPORTING
19 e_s_source = l_s_source
20 e_s_target = l_s_target
21 ).
22 CATCH cx_rstran_not_found .
>>>>> ASSERT sy-index < 2.
24 ENDTRY.
25 * for possible second run set objvers
26 l_objvers = rs_c_objvers-modified.
27 ENDWHILE.
29 * pass back the su
30 IF i_target = rs
31 re_awbsubobjec
32 ELSE.
33 re_awbsubobjec
34 ENDIF.
35
36 ENDMETHOD.
Please adviceHI,
I have read the sap notes and that is exactly what happen to me.
but I don't understand how to correct it.
It said :
This error cannot be corrected automatically. Use the method DELETE_VERSION_FROM_DB of the class CL_RSTRAN_STAT to delete the existing A version of the transformation manually in the target system.
Ensure that the transformation is permanently deleted from the database; therefore, you should verify that the correct transformation ID is specified (in the short dump, the TranID that is specified in the short dump is in the variable L_TRANID).
anybody know how to use delete_version_from_db ?
please advice -
Data is not fetching in inner join
Hi Experts,
I developed a select query using inner joins, all the fields data is gettting appended, but one field DISPO data is not getting appeneded. please check the innerjoin and suggest me ur soluitons.
MODULE GET_DATA OUTPUT.
select arbpl
sptag
aufnr
plnum
posnr
plnfl
werks from s022
into table it_s022
where arbpl in s_arbpl
and werks in s_werks
and sptag in s_sptag
and matnr in s_matnr.
if sy-subrc eq 0.
select a~aufnr
a~posnr
a~kdauf
a~pgmng
a~plnum
a~strmp
b~plnty
b~gamng
b~igmng
b~iasmg
b~rmnga
b~gstrp
b~rsnum
b~plnbez
b~dispo
c~maktx
b~plnnr
b~plnty
b~zaehl
d~vornr
d~ltxa1
b~aufpl
b~aplzt
e~astnr
into corresponding fields of table it_afpo from afko as b
inner join afpo as a
on a~aufnr = b~aufnr
inner join makt as c
on b~plnbez = c~matnr
inner join plpo as d
on b~plnnr = d~plnnr
and b~plnty = d~plnty
and b~zaehl = d~zaehl
inner join aufk as e
on b~aufnr = e~aufnr
inner join marc as f
on bplnty = fmatnr
for all entries in it_s022
where b~aufnr = it_s022-aufnr.
and e~erdat = it_s022-sptag
and a~posnr = it_s022-posnr
and a~plnum = it_s022-plnum . .
if sy-subrc eq 0.
it_afpo1[] = it_afpo[].
sort it_afpo1 by aufpl." aplzt."""
delete ADJACENT DUPLICATES FROM it_afpo1 COMPARING aufpl." aplzt ."""
select aufpl
aplzl
fsavd
fsavz
ssedd
ssedz
mgvrg
FROM afvv INTO TABLE It_afvv
FOR ALL ENTRIES IN IT_afpo1
WHERE aufpl = IT_afpo1-aufpl.
and aplzl = it_afpo1-aplzt.
endif.
loop at it_afpo into wa_afpo.
DATA : G_SLNO(8) TYPE C.
G_SLNO = G_SLNO + 1.
wa_afpo-slno = g_slno.
move-corresponding wa_afpo to wa_final.
move-corresponding wa_afko to wa_final.
read table it_afvv into wa_afvv with key
aufpl = wa_afpo-aufpl binary search."aplzl = wa_afpo-aplzt binary search."""
*read table it_afko into wa_afko with key aufnr = wa_final-aufnr.
IF SY-SUBRC EQ 0.
move-corresponding wa_afvv to wa_final.
bal_qty = wa_final-gamng - wa_final-igmng.
move : wa_afpo-slno to wa_final-slno,
wa_afpo-aufnr to wa_final-aufnr,
wa_afpo-posnr to wa_final-posnr,
wa_afpo-kdauf to wa_final-kdauf, " Sales order Number
wa_afpo-pgmng to wa_final-pgmng, " Order item qty
wa_afpo-plnum to wa_final-plnum, " Planned Order Qty
wa_afpo-strmp to wa_final-strmp, " Planned Order Date
wa_afpo-gstrp to wa_final-gstrp, " Basic Finish date
wa_afpo-rsnum to wa_final-rsnum, " Number of Reservation
wa_afpo-plnbez to wa_final-plnbez, " Material Number
wa_afpo-maktx to wa_final-maktx,
wa_afpo-plnnr to wa_final-plnnr,
wa_afpo-plnty to wa_final-plnty,
wa_afpo-zaehl to wa_final-zaehl,
wa_afpo-vornr to wa_final-vornr,
wa_afpo-ltxa1 to wa_final-ltxa1,
wa_afpo-aufpl to wa_final-aufpl,
wa_afvv-fsavd to wa_final-fsavd,
wa_afvv-fsavz to wa_final-fsavz,
wa_afvv-ssedd to wa_final-ssedd,
wa_afvv-ssedz to wa_final-ssedz,
wa_afvv-mgvrg to wa_final-mgvrg,
wa_afko-igmng to wa_final-igmng,
wa_afko-iasmg to wa_final-iasmg,
wa_afko-rmnga to wa_final-rmnga,
wa_afko-dispo to wa_final-dispo,
wa_afko-bal_qty to wa_final-bal_qty,
wa_aufk-astnr to wa_final-astnr,
wa_afpo-text to wa_final-text.
*bal_qty = wa_final-gamng - wa_final-igmng.
*bal_qty = wa_afko-bal_qty.
endif.
append wa_final to it_final.
clear:wa_final ,wa_afpo,wa_afvv,wa_aufk,wa_afko.
endloop.
endif.
ENDMODULE. " GET_DATA OUTPUT
*& Module DISPLAY_DATA OUTPUT
text
MODULE DISPLAY_DATA OUTPUT.
IF REF_CONTAINER IS INITIAL.
PERFORM FIELD_CAT.
CREATE OBJECT REF_CONTAINER
EXPORTING
PARENT =
CONTAINER_NAME = 'CUSTOM_CONTROL'
STYLE =
LIFETIME = lifetime_default
REPID =
DYNNR =
NO_AUTODEF_PROGID_DYNNR =
EXCEPTIONS
CNTL_ERROR = 1
CNTL_SYSTEM_ERROR = 2
CREATE_ERROR = 3
LIFETIME_ERROR = 4
LIFETIME_DYNPRO_DYNPRO_LINK = 5
others = 6
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
L_LAYO-ZEBRA = 'X'.
L_LAYO-GRID_TITLE = 'JOB CARD'.
data: variant type disvariant.
CREATE OBJECT REF_ALV_GRID
EXPORTING
I_SHELLSTYLE = 0
I_LIFETIME =
I_PARENT = REF_CONTAINER
I_APPL_EVENTS = space
I_PARENTDBG =
I_APPLOGPARENT =
I_GRAPHICSPARENT =
I_NAME =
I_FCAT_COMPLETE = SPACE
EXCEPTIONS
ERROR_CNTL_CREATE = 1
ERROR_CNTL_INIT = 2
ERROR_CNTL_LINK = 3
ERROR_DP_CREATE = 4
others = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
l_variant-report = sy-cprog.
*data: l_prnt type lvc_s_prnt.
*l_prnt-print = 'X'.
SORT T_FCAT.
call method ref_alv_grid->set_ready_for_input
exporting
i_ready_for_input = 1.
create object event_receiver.
set handler event_receiver->handle_top_of_page for ref_alv_grid.
CALL METHOD REF_ALV_GRID->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
I_BUFFER_ACTIVE =
I_BYPASSING_BUFFER =
I_CONSISTENCY_CHECK =
I_STRUCTURE_NAME =
is_variant = variant "l_variant
i_save = 'X'
I_DEFAULT = 'X'
IS_LAYOUT = L_LAYO
IS_PRINT =
IT_SPECIAL_GROUPS =
IT_TOOLBAR_EXCLUDING =
IT_HYPERLINK =
IT_ALV_GRAPHICS =
IT_EXCEPT_QINFO =
IR_SALV_ADAPTER =
CHANGING
IT_OUTTAB = IT_final[]
IT_FIELDCATALOG = T_FCAT
IT_SORT =
IT_FILTER =
EXCEPTIONS
INVALID_PARAMETER_COMBINATION = 1
PROGRAM_ERROR = 2
TOO_MANY_LINES = 3
others = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
create object g_event_receiver.
set handler g_event_receiver->handle_user_command for ref_alv_grid.
set handler g_event_receiver->handle_toolbar for ref_alv_grid.
§ 4.Call method 'set_toolbar_interactive' to raise event TOOLBAR.
call method ref_alv_grid->set_toolbar_interactive.
call method cl_gui_control=>set_focus exporting control = ref_alv_grid.
ENDIF.
ENDMODULE. " DISPLAY_DATA OUTPUT
*& Module STATUS_0100 OUTPUT
text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'MAIN001'.
SET TITLEBAR 'xxx'.
Regards,
Bharath KumarI agree with Shiva Kumar - most likely there is no such field in it_afpo. A few more suggestions though:
1) Do not post large pieces of code here - if you have a question about a particular SELECT statement, post only that statement and relevant data definitions. No one is going to read your whole program anyway - we have work to do too.
2) Your JOIN is way too big and would be difficult to analyze if anything goes wrong. You might want to start with smaller SELECTs and, when you're sure everything is working correctly, then combine them into one. Also huge JOINT is not necessarily more efficient.
3) You don't have to use aliases "AS a... AS b", etc. Instead, just use the table name, e.g. AFKO... AFPO... .It is much easier to read this way. The aliases are needed only if you're joining the same table more than once. Also they're not limited to one letter either.
Maybe you are looking for
-
I don't know where the problem originate, the only thing in my memory is that the program worked very well on my PC yesterday, but today, without even slightest change, it doesn't work anymore. As to debug it, I simplified the codes to the least, but
-
After the latest security update, my Bluetooth is off, and the button to turn it on is greyed out. Anyone know what's going on? Thanks in advance for any tips.
-
Shared partition creation (SAN EVA 4400) for OCR/Vote andASM on linux RHEL5
Hi all, We are going to install database (Oracle 10g) with RAC on Linux Red Hat Enterprise 5. The storage we are using is SAN shared storage, out SAN vendor has finished to configure and present the dsk storage (500 Gb) to the 2 servers, the name of
-
Proc*C/C++ suport for include files without .h extensions
We have written code C++ code which is Standard C++ ver 5.0 compilant. In this version of C++ compiler the files are without .h extensions. For example <iostream.h> is now to be reffered as <iostream>. We are facing problems in compiling this code wi
-
Where is the backup dialog on the import image pane in lr5.6
There used to be the ability to backup your images in lr5.5 during import. I still have it in windows but its gone on my mac?