CL_SALV_TREE: how to avoid the toolbar

I use CL_SALV_TREE to show a popup-window that has only one container for the tree. The user may choose an item from the tree by doubleclicking it.
I do not need any toolbar for this functionality, so I do not set any function. But above the tree there is a line of free space left in the container, where the toolbar normally would be shown. Is it possible to switch the toolbar off, so that the tree will use the complete container without leaving empty space for a toolbar?

CL_SALV_TREE uses CL_SALV_CONTROLLER_TREE and this uses an adapter.
CL_SALV_TREE within a container creates an adapter of type CL_SALV_TREE_ADAPTER and this creates a CL_SALV_GUI_TREE with the parameter no_toolbar = abap_false, so you always get a toolbar - with icons or not depends on your choice of functions, without icons you'll get empty space.
CL_SALV_TREE without a container (fullscreen) creates an adapter of type CL_SALV_FULLSCREEN_TREE_ADAPTE and this creates a CL_SALV_GUI_TREE with the parameter no_toolbar = abap_true, so you never get a toolbar, no icons and no empty space.
Have a look at SALV_DEMO_TREE_SIMPLE. You can choose between fullscreen and tree in dynpro (container). Fullscreen-mode is without toolbar (but with icons from gui-status SALV_STANDARD). Container-mode is with toolbar (or empty space when you delete the functions).
So, I suppose there is no easy way to get rid of the empty space - unless you take CL_SALV_GUI_TREE directly
regards, Karsten
Edited by: Karsten Korte on Sep 22, 2009 4:19 PM

Similar Messages

How to avoid the duplicate values, I do not want the duplicate............

i have one database table called "sms1" that table is updated every day or on daily basis it has the following fields in it:
SQL> desc sms1;
Name Null? Type
MOBILE NUMBER
RCSTCNATCNATCNATCNAWTHER VARCHAR2(39 CHAR)
SNO NUMBER
INDATE DATE
From this table the is one column "RCSTCNATCNATCNATCNAWTHER VARCHAR2(39 CHAR)" . I am splitting it into different columns like :
SQL> desc smssplit;
Name Null? Type
R VARCHAR2(2 CHAR)
C VARCHAR2(2 CHAR)
S VARCHAR2(1 CHAR)
TC VARCHAR2(3 CHAR)
NA VARCHAR2(3 CHAR)
TC2 VARCHAR2(3 CHAR)
NA2 VARCHAR2(3 CHAR)
TC3 VARCHAR2(3 CHAR)
NA3 VARCHAR2(3 CHAR)
TC4 VARCHAR2(3 CHAR)
NA4 VARCHAR2(3 CHAR)
WTHER VARCHAR2(10 CHAR)
SNO NUMBER
INSERTDATA VARCHAR2(25 CHAR)
Now I am written a procedure to insert the data from "Sms1" table to smssplit table...
CREATE OR REPLACE PROCEDURE SPLITSMS
AS
BEGIN
INSERT INTO scott.SMSSPLIT ( R,C,S,TC,NA,TC2,NA2,TC3,NA3,TC4,NA4,WTHER,SNO)
SELECT SUBSTR(RCSTCNATCNATCNATCNAWTHER,1,2) R,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,3,2) C,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,5,1) S,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,6,3) TC,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,9,3) NA,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,12,3) TC2,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,15,3) NA2,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,18,3) TC3,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,21,3) NA3,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,24,3) TC4,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,27,3) NA4,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,30,10) WTHER, SNO
FROM scott.SMS1 where SNO=(select MAX (sno) from SMS1);
END;
Now in order to update the second table with data from first table on regular basis I have written a job scheduler and I am using oracle 9.0. version...
DECLARE
X NUMBER;
JobNumber NUMBER;
BEGIN
SYS.DBMS_JOB.SUBMIT
job => X
,what => 'scott.SPLITSMS;'
,next_date => SYSDATE+1/1440
,interval => 'SYSDATE+1/1440 '
,no_parse => FALSE
:JobNumber := to_char(X);
END;
Now this job scheduler is working properly and updating the data for every one minute but it is taking or updating the duplicate values also ..like example:
R C S TC NA TC2 NA2 TC3 NA3 TC4 NA4 WTHER SNO
INSERTDATA
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:49:16
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:49:16
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:50:17
R C S TC NA TC2 NA2 TC3 NA3 TC4 NA4 WTHER SNO
INSERTDATA
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:50:17
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:51:19
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:51:19
R C S TC NA TC2 NA2 TC3 NA3 TC4 NA4 WTHER SNO
INSERTDATA
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:52:20
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:52:20
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:53:22
R C S TC NA TC2 NA2 TC3 NA3 TC4 NA4 WTHER SNO
INSERTDATA
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:53:22
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:54:45
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:54:45
Now I do not want the duplicate values to be updated ...and want them to ignore them.....
please I need a help on this query........How to avoid the duplicate values............

Look at the posts closely:might not be needed if formatted ;)
create or replace procedure splitsms as
begin
insert into scott.smssplit (r,c,s,tc,na,tc2,na2,tc3,na3,tc4,na4,wther,sno)
select substr(rcstcnatcnatcnatcnawther,1,2) r,
         substr(rcstcnatcnatcnatcnawther,3,2) c,
         substr(rcstcnatcnatcnatcnawther,5,1) s,
         substr(rcstcnatcnatcnatcnawther,6,3) tc,
         substr(rcstcnatcnatcnatcnawther,9,3) na,
         substr(rcstcnatcnatcnatcnawther,12,3) tc2,
         substr(rcstcnatcnatcnatcnawther,15,3) na2,
         substr(rcstcnatcnatcnatcnawther,18,3) tc3,
         substr(rcstcnatcnatcnatcnawther,21,3) na3,
         substr(rcstcnatcnatcnatcnawther,24,3) tc4,
         substr(rcstcnatcnatcnatcnawther,27,3) na4,
         substr(rcstcnatcnatcnatcnawther,30,10) wther,
         sno
    from scott.sms1 a
   where sno = (select max(sno)
                  from sms1
                 where sno != a.sno
               ); ---------------> added where clause with table alias.
end;Regards
Etbin

How can avoid the problem of Parameter Prompting when I submitting ?

I am developing web application in visual studio 2008 in csharp.How can avoid the issue or problem of Parameter Prompting when I send parameters programaticaly or dyanmicaly? I am sending the values from .net web form to crystal report but it is still asking for parameters. so when i submit second time that is when the reports is being genereated. How can i solve this problem. Please help. The code Iam using is below.
   1. using System;
   2. using System.Collections;
   3. using System.Configuration;
   4. using System.Data;
   5. using System.Linq;
   6. using System.Web;
   7. using System.Web.Security;
   8. using System.Web.UI;
   9. using System.Web.UI.HtmlControls;
10. using System.Web.UI.WebControls;
11. using System.Web.UI.WebControls.WebParts;
12. using System.Xml.Linq;
13. using System.Data.OleDb;
14. using System.Data.OracleClient;
15. using CrystalDecisions.Shared;
16. using CrystalDecisions.CrystalReports.Engine;
17. using CrystalDecisions.Web;
18.
19.
20. public partial class OracleReport : System.Web.UI.Page
21. {
22.     CrystalReportViewer crViewer = new CrystalReportViewer();
23.     //CrystalReportSource crsource = new CrystalReportSource();
24.     int nItemId;
25.
26.     protected void Page_Load(object sender, EventArgs e)
27.     {
28.         //Database Connection
29.         ConnectionInfo ConnInfo = new ConnectionInfo();
30.         {
31.             ConnInfo.ServerName = "127.0.0.1";
32.             ConnInfo.DatabaseName = "Xcodf";
33.             ConnInfo.UserID = "HR777";
34.             ConnInfo.Password = "zghshshs";
35.         }
36.         // For Each Logon parameters
37.         foreach (TableLogOnInfo cnInfo in this.CrystalReportViewer1.LogOnInfo)
38.         {
39.             cnInfo.ConnectionInfo = ConnInfo;
40.
41.         }
42.
43.
44.
45.
46.
47.
48.         //Declaring varibles
49.          nItemId = int.Parse(Request.QueryString.Get("ItemId"));
50.         //string strStartDate = Request.QueryString.Get("StartDate");
51.         //int nItemId = 20;
52.         string strStartDate = "23-JUL-2010";
53.
54.         // object declration
55.         CrystalDecisions.CrystalReports.Engine.Database crDatabase;
56.         CrystalDecisions.CrystalReports.Engine.Table crTable;
57.
58.
59.         TableLogOnInfo dbConn = new TableLogOnInfo();
60.
61.         // new report document object
62.         ReportDocument oRpt = new ReportDocument();
63.
64.         // loading the ItemReport in report document
65.         oRpt.Load("C:
Inetpub
wwwroot
cryreport
CrystalReport1.rpt");
66.
67.         // getting the database, the table and the LogOnInfo object which holds login onformation
68.         crDatabase = oRpt.Database;
69.
70.         // getting the table in an object array of one item
71.         object[] arrTables = new object[1];
72.         crDatabase.Tables.CopyTo(arrTables, 0);
73.
74.         // assigning the first item of array to crTable by downcasting the object to Table
75.         crTable = (CrystalDecisions.CrystalReports.Engine.Table)arrTables[0];
76.
77.         dbConn = crTable.LogOnInfo;
78.
79.         // setting values
80.         dbConn.ConnectionInfo.DatabaseName = "Xcodf";
81.         dbConn.ConnectionInfo.ServerName = "127.0.0.1";
82.         dbConn.ConnectionInfo.UserID = "HR777";
83.         dbConn.ConnectionInfo.Password = "zghshshs";
84.
85.         // applying login info to the table object
86.         crTable.ApplyLogOnInfo(dbConn);
87.
88.
89.
90.
91.
92.
93.         crViewer.RefreshReport();
94.
95.                 // defining report source
96.         crViewer.ReportSource = oRpt;
97.         //CrystalReportSource1.Report = oRpt;
98.
99.         // so uptill now we have created everything
100.         // what remains is to pass parameters to our report, so it
101.         // shows only selected records. so calling a method to set
102.         // those parameters.
103.      setReportParameters();
104.     }
105.
106.     private void setReportParameters()
107.     {
108.
109.         // all the parameter fields will be added to this collection
110.         ParameterFields paramFields = new ParameterFields();
111.          //ParameterFieldDefinitions ParaLocationContainer = new ParameterFieldDefinitions();
112.        //ParameterFieldDefinition ParaLocation = new ParameterFieldDefinition();
113.
114.         // the parameter fields to be sent to the report
115.         ParameterField pfItemId = new ParameterField();
116.         //ParameterField pfStartDate = new ParameterField();
117.         //ParameterField pfEndDate = new ParameterField();
118.
119.         // setting the name of parameter fields with wich they will be recieved in report
120.
121.         pfItemId.ParameterFieldName = "RegionID";
122.
123.         //pfStartDate.ParameterFieldName = "StartDate";
124.         //pfEndDate.ParameterFieldName = "EndDate";
125.
126.         // the above declared parameter fields accept values as discrete objects
127.         // so declaring discrete objects
128.         ParameterDiscreteValue dcItemId = new ParameterDiscreteValue();
129.         //ParameterDiscreteValue dcStartDate = new ParameterDiscreteValue();
130.         //ParameterDiscreteValue dcEndDate = new ParameterDiscreteValue();
131.
132.         // setting the values of discrete objects
133.
134.
135.           dcItemId.Value = nItemId;
136.
137.         //dcStartDate.Value = DateTime.Parse(strStartDate);
138.         //dcEndDate.Value = DateTime.Parse(strEndDate);
139.
140.         // now adding these discrete values to parameters
141.           //paramField.HasCurrentValue = true;
142.
143.
144.
145.           //pfItemId.CurrentValues.Clear();
146.          int valueIDD = int.Parse(Request.QueryString.Get("ItemId").ToString());
147.           pfItemId.Name = valueIDD.ToString();
148.
149.         pfItemId.CurrentValues.Add(dcItemId);
150.         //ParaLocation.ApplyCurrentValues;
151.         pfItemId.HasCurrentValue = true;
152.
153.         //pfStartDate.CurrentValues.Add(dcStartDate);
154.         //pfEndDate.CurrentValues.Add(dcEndDate);
155.
156.         // now adding all these parameter fields to the parameter collection
157.         paramFields.Add(pfItemId);
158.
159.         //paramFields.Add(pfStartDate);
160.         //paramFields.Add(pfEndDate);
161.         /////////////////////
162.         //Formula from Crystal
163.        //crViewer.SelectionFormula = "{COUNTRIES.REGION_ID} = " + int.Parse(Request.QueryString.Get("ItemId")) + "";
164.         crViewer.RefreshReport();
165.         // finally add the parameter collection to the crystal report viewer
166.         crViewer.ParameterFieldInfo = paramFields;
167.
168.
169.
170.     }
171. }

Keep your post to under 1200 characters, else you loose the formatting. (you can do two posts if need be).
Re. parameters. First, make sure yo have SP 1 for CR 10.5:
https://smpdl.sap-ag.de/~sapidp/012002523100009351512008E/crbasic2008sp1.exe
Next, see the following:
[Crystal Reports for Visual Studio 2005 Walkthroughs|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2081b4d9-6864-2b10-f49d-918baefc7a23]
CR Dev help file:
http://msdn2.microsoft.com/en-us/library/bb126227.aspx
Samples:
https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsfor.NETSDK+Samples
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup

How to avoid the event has been repeated many times in the background

Application, the main screen is divided into two containers:left and right container,
The right side of the container is divided into two containers:top and bottom container,
There is a button in the left container.
Click the button, the container at lower right will using ModuleManager load Module, The following container load of the right of the screen has been monitoring the container above the action.
Problem:
When you click the button repeatedly to load the container in the lower right, it will create multiple instances, and can not be freed immediately. When the above container do an action or event, there are multiple instances of monitoring exist.
The background will be repeat the action or event many times.
How to avoid the event has been repeated many times in the background?
Thanks

Flex harUI
multiple instances of a mxml, maybe ?

How to avoid the long time consuming process of settlement on periodic basi

For investment Project(purpose of capitalisation) related expenses We would like to show it Directly in Balance Sheet rather than P/L A/C.Whether it is feasible or not?as per one of consultant it will be first hit the p/L and after settlement it will only be shown in B/Sheet.So how to avoid the long time consuming process of settlement on periodic basis.

Hi, could you write down an example? And what you mean by investment project-is this an WBS?

How to avoid the pdf file in browser cache

i am opening pdf files through browser. After that same pdf changed their contents . after i open the pdf but it will not updated. Bcoz this file in cache . so how to avoid the cache store for pdf files.
plz help me!!!

the code is as bellow
File fBlob = new File ("test.pdf");
FileInputStream fIS = new FileInputStream(fBlob);
pstUpdate= con.prepareStatement("UPDATE table set file = ? where id = ?");
pstUpdate.setBinaryStream(1, fIS, (int) fBlob.length());
pstUpdate.setString(2, rs.getString("id"));
pstUpdate.execute();
con.commit();

How to avoid the screen of selection output device

Hi all,
Who can tell me how to avoid the screen selection output device when running a smartform.
Best regard.

Hi,
      data: wa_SSFCTRLOP type SSFCTRLOP.
       wa_SSFCTRLOP-DEVICE = 'PRINTER'.
       wa_SSFCTRLOP-NO_DIALOG = 'X'.
       wa_SSFCTRLOP-PREVIEW = 'X'.
    in the function module
   call function '....
   exporting
   CONTROL_PARAMETERS = wa_ssfctrlop
regards,
Santosh Thorat

How to avoid the transport request popup when changing real-time load behav

Hello experts,
I'm often switching between the two loading mode, and I already worked in systems where I don't have the popup for transport request : (so I guess there is a possible tuning anywhere)
How to avoid the "asking for a transport request" popup in BW when changing real-time load behaviour of an infocube
Thanks in advance, I will save precious time
Guillaume P.

Hello Krishnan,
i tried to switch all object types from "not changeable" to "changeable original", but still get the popup when switching cube loading mode.
Do you know the particular object type to manage ?
Hello Vishnu,
same thing, whatever the option is (switch on / off standard) I have the transport popup.
Anyway thanks for your try.

How to avoid the Blank elemts in the List Item

Dear All,
I am using a List Item
List Elements List Item Value
Yes 1
No 2
Only two elements in this List Item.But at Run time there is one Blank element.
I need to display only two elements from the List Item .How to avoid the Blank.
Thanks and Regards,
Fazil

Fazil,
I am using a List ItemList Elements List Item Value
Yes 1
No 2
Only two elements in this List Item.But at Run time there is one Blank element.
I need to display only two elements from the List Item .How to avoid the Blank.>
Maybe you actually have null entries in your list. You can clean it up using keys as discussed here http://paranoid-engineering.blogspot.in/2008/05/wonderland-of-oracle-forms-builder.html (Ignore the personal opinions of the author if you will ;) ).
Cheers,

How to avoid the Amount and Date values for VOID Cheques

Hi All,
I had created a two window i.e For Amount and Date. If I process the cheque the Amount value and Date should not trigger for VOID CHEQUES.
Can any one tel me how to avoid the Amount and Date values for VOID Cheques
Your help will be greatly appreciated.
Regards
Yathish

Hi,
I dont know which tablel you are referring to, is it PAYR table and the field VOIDR?
If a cheque is voided, it would have a reason and it is stored in VOIDR field of this PAYR table.
Check if the field VOIDR is filled, if it is filled, do not print the amount and date.
Regards
Subramanian

How to avoid the repeting question for autorisation of my computer (only for movies)

Hallo,
Does anyone know how to avoid the repeting question for autorisation of my computer?
This happens only for movies that I bought.
Hopefully someone can help me out.
thx,
Frederique

Open itunes, Click Itunes, Check For updates

How to avoid the objects dependency in the packages by standard settings?

Hi,
How to avoid the objects dependency in the packages by standard settings?
Example Scenario -> Our project uses two packages u2018ZZP1u2019 and u2018ZZP2u2019 for developments in the system u2018SN1u2019. We created a domain u2018ZZ_DO_TESTu2019 in the Package u2018ZZP1u2019. Now we have to make sure that the developer should not use or refer domain u2018ZZ_DO_TESTu2019 for the developments in the package u2018ZZP2u2019.
u2026Naddy

Evevn i felt that in the CTS at least a warning can be given if the included objects refer to any other object(s) which arre:
1. Local Objects
2. Locked under other requests,
3. Lastly able to detect cyclic dependency as in we had a situation where we had a program locked in request A which calls an FM locked in request B. Now Request B refers to a message which is locked in request A.Since it was a message it gave only requrn code 4 in transport and transport ended with warnings. But if it is some other object then it is going to give compile error in at least one transport and neither can be moved without the other.
Anyways, i will check the BAPI he has mentioned and see if any workaround can be done,
Request: Please keep the post active until we arrive at a good solution,Thanks.

How to avoid the dtd validate of the "iTunes Music Library.xml " when read?

Hi all,
In the article of What are the iTunes library files?("http://docs.info.apple.com/article.html?artnum=93732" ),there is something about the function of "iTunes Music Library.xml " of iTunes.I can get information by reading this xml file.But this file must be validated online(dtd validate).When the net is unconnected,the web exception may be threw.How to avoid the dtd validate of the "iTunes Music Library.xml " when read?Thank you.

You can do this with YamiPod (Free)
http://www.yamipod.com/main/modules/downloads/
Or manualy:
Here is a link to where it tells how to do this manualy:
http://discussions.apple.com/message.jspa?messageID=797432#797432

How to avoid the below nested select statement

Please any one help me how this select statemet is working and      how to avoid the nesetd select statement .
if we avoid below nested , does it improve performace ?
select field1 field2
           into table w_feeds
           from ZTable as t
           where field2 in r_feedf1
           and POSITION_POSTDT =
           ( SELECT MAX( position_postdt ) FROM zTable
                  where position_postdt le r_pdate-high
                  and   field1 = t~field1 ).
Thanks in Advace.

Hi,
Instead of nested query go for two separate queries. I see you are querying on the same table...so better go by this approach
select field1 field2 POSITION_POSTDT
into table w_feeds
from ZTable
where field2 in r_feedf1.
Remove the where condition on POSITION_POSTDT
Sort the table w_feeds by POSITION_POSTDT Descending; So you will get data pertaining to Max Position_Postdt.
Finally delete the other entries which are not Max.
This will enhance the performance over the nested query.
Regards
Shiva
Edited by: Shiva Kumar Tirumalasetty on Apr 27, 2010 7:00 PM
Edited by: Shiva Kumar Tirumalasetty on Apr 27, 2010 7:00 PM

How to avoid the null values from xml publisher.

I am creating a report which have the claim numbers with the values CLA001,CLA111,null, null . when i preview my report it is showing some spaces for null values also. How can i avoid the spaces from the report.
I am giving for loop for the claim numbers in the template.
<?for-each:ROW?> <?sort:CLAIMNUMBER;'ascending';data-type='text'?>
<?CLAIMNUMBER?>
<?end for-each?>
Please help me out to solve this problem.
Thanks,
vasanth.

Hi Sheshu,
According to your description, you are experiencing the null values and infinity values when browser the calculated measure, right?
Based on my research, the issue is caused by that dividing a non-zero or non-null value by zero or null. In this cases, we need to check for division by zero to avoid this situation. Here is the sample query for you reference.
IIF(
Measures.[Measure B]=0,null,
Measures.[Measure A] / Measures.[Measure B]
If you have any questions, please feel free to ask.
Regards,
Charlie Liao
TechNet Community Support

CL_SALV_TREE: how to avoid the toolbar

Similar Messages

Maybe you are looking for