CLA looking for a job in Denver area
Hello,
I am looking to move out to the Denver area in the next month or two, so I'm trying to find some work. I'm hoping to find a full-time position but I'm open to doing contract work. I've been using LabVIEW for 6-7 years and I've been a CLA for 4 years of that. I've worked on a whole variety of projects mostly in the Test and Measurement, and Instrumentation and Controls areas. I've got an MS in Electrical Engineering with an emphasis in controls. Not only do I do software but I also do some hardware work.
If you'd like more information just ask.
Sam
--sorry mods, pls delete.
Similar Messages
-
Looking for ColdFusion guru in Denver area
I need a ColdFusion programmer with content creation, cfc, and SQL experience to refer as back-up in case something happens to me. This is for a potential web site I will build for a professional association that has multiple chapters. Preferably, I need someone who is physically located in or near the Denver, Colorado, metropolitan area.
Go to guru.com and search for Coldfusion Denver
-
I'm looking for a job in the gulf area
Hey all
i'm an experienced ALBPM Developer and designer with over 4 years of total experience in the gulf area
i'm looking for a job as an ALBPM Team Leader or a senior developer
if you can help me please send me an email on
[email protected]
[email protected]
i'm currently based in kuwaitHi Sir/Madam,
I recently Completed my PG Diploma in Industrial Automation and System Design from
National Institute of Electronics and Information Technology (NIELIT) Calicut with 72.2%.
I've deep knowledge in PLC, SCADA, NI-LabVIEW (core 1 & core 2) Applications. I am good labVIEW Programmer and
I am seeking job in labVIEW Sector,
please help me where i could get the job in labview Sector.
Please find the attached resume.
Thanks & Regards,
Ravi Kumar
+91-9000324146
Attachments:
PENDLI RAVIKUMAR resume.docx 25 KB -
I am currently recently graduated from the University of Technology in Belfort-Montbeliard (France).
Master’s grade of “Electrical and control systems engineering”.
I am currently looking for a job in automation, control systems and electronic domain (I prefere LabView Developpement)
Salim DARWICHE
1 rue antonin artaud
31320 castanet tolosan
Tel: 0033.6.85485107
Email : [email protected]
Nationalities :
- French
- Lebanese
Date and place of birth:
April 18, 1986
Toulouse,
France
Education
2009
Master in Electrical and Control Systems Engineering
Option Embedded
systems
University of technology of Belfort-Montbliard france
2006 University
Diploma in Industrial and Maintenance Engineering
DUT Degree Equivalent to 3 years of
technical studies
Institute of technology of Saida
Lebanon
Experience
February
July 2009 Galley-Technologies (Neuchatel-Switzerland)
Mission:
Development of
Labview Modules for Pharmaceutics and Robotics
industries
Realization(s):
Communication and data-Analyse Software using
TCP/IP:
- Development of a software (Labview Programming) that would permit data
transfer between many pharmaceutical ovens, in order to analyse all production cycle, and test
the conformity of the final products.
5 Axis robot simulation software:
Concept and development of simulation tool for a robot working cycle
September 2007
February 2008 Valeo VSS (Paris France)
Mission:
Qualification and management of
automobile electronic components
Qualification of specific electronic components
Making sure that all electronics components will be qualified on time before the
Start-of-Project
- Discussion between me, Valeo supplier and Valeo Project Manager in order
to grant Valeo quality standard Specifications or to approve supplier deviations.
Management of electronic qualification documents on Valeo ePLM system.
- Participating to
daily quality reviews meetings and brainstorming in order to apply a PDCA (plan Do Check
Act)
Management of Valeo DSA products under IMDS Base
- Management and
declaration of Valeo Division Systems Access products under IMDS base (international Material
data systems)
- Creating MDS sheets then sending them to Automobile
Constructors.
February June 2006 United-Group Machinery
(Beirut-Lebanon)
Mission:
Renovating a bag-filling
machine
Realization(s):
Mechanical system
- Drawing all parts of
the machine (3D), assembly and motion using Autodesk Inventor.
- Unmount, replacing bad
parts then assembly of the machine.
- Integrating of a weigher machine to the top of the
bag-filling machine.
Control system
-Removing old control system and
integrating a PLC and a control panel
-Programming the PLC (Delta type) with Ladder
diagram.
Knowledge
Languages
French
and Arabic: Native languages.
English: fluent, TOEIC 890/990 Test of English for
International Communication.
Spanish: Intermediate.
Automation
- Labview,
Matlab Simulink
-Programming DSP Controller TMS320LF2407.
-Programming in languages:
assembler, C.
- PLC Programming (Crouzet, Delta, tlmcanique, Moller) -Ladder, List,
Grafcet-
-Controlled systems: Continuous aspect
Electronics
-Programming in
VHDL.
-Programming of PIC 16F87X.
-Simulation (Simplorer, Circuit maker, Electronic
Workbench, Proteus, Kicad).
Electrical
- Machines D.C. current, synchronous,
asynchronous, electrical supply networks.
Various
- CAD: AutoCAD, Autodesk
Inventor, Mastercam, Programming of machines with numerical control CNC (languages Num, Fanuc,
Fagor).
-CAM: Ms-Project (Gantt, Pert, Kanban)
Message Edité par salimo le 11-04-2009 04:35 PM
~~~~~~~~~~~~~~~~~~Looking for a LABVIEW JOB (In EUROPE)>~~~~~~~~~~~~~~~~~~
**The Best Way To Predict**The**Future Is To Invent It**
Attachments:
CV_Salim_Darwiche_S_12_10_09.doc 77 KB
CV_SalimDARWICHE_EN_S.doc 229 KBMessage Edité par salimo le 11-04-2009 04:36 PM
~~~~~~~~~~~~~~~~~~Looking for a LABVIEW JOB (In EUROPE)>~~~~~~~~~~~~~~~~~~
**The Best Way To Predict**The**Future Is To Invent It** -
Experienced Professional Looking for LabVIEW Job offer anywhere in USA
Hi,
I am Sreekanth Komatineni from Virginia looking for some job offer. Here is my brief experience.
Here is my Skillset.
Skills: LabVIEW, VB, VC++, C/C++, and Java with good customer interaction.
Experience Summary:
Over 7 years of Industry experience with 4yrs purely on LabVIEW in design and development of customized PC based Embedded Applications, Industrial automations, Data acquisition and Control Systems using LABVIEW 7.1/8.0/8.2/8.5 and NI DAQ Cards in the defense, manufacturing and telecommunication industries.
Experience with PMD USB Interface cards, GPIB Interface, VISA and Serial I/O Interface, Code Interface Nodes, Call Library Function nodes to interface with third party and custom Dlls, Multi-channel Data acquisition, Software Triggering, Analysis of acquired data with mathematical algorithms, Controlling and Monitoring applications, MODBUS and ASCII, I2C, UART communication programming on PC side, good at PC based Automations.
Willing to relocate anywhere in USA.
Thanks and Regards
Sreekanth. Komatineni
[email protected]Hi Harold,
Please see my email to you & proceed accordingly.
Good luck!
- Partha
LabVIEW - Wires that catch bugs! -
Dear Sir\Mam,
I am Rajmohan,i am looking for LabVIEW job.I have CLAD certification with 3 years experiance in Automation field,if you have any opening pls consider me.Herewith i have attached my Resume.i am expecting your acknowledgemet,Thanks
Attachments:
RAJMOHAN.doc 65 KBYou may have more luck in the specific LabVIEW Developer's Looking for a Job board: http://forums.ni.com/t5/LabVIEW-Developers-Seeking/bd-p/JobSearch
Certified LabVIEW Architect, Certified TestStand Developer
NI Days (and A&DF): 2010, 2011, 2013, 2014
NI Week: 2012, 2014
Knowledgeable in all things Giant Tetris and WebSockets -
Hi I'm looking for some keyboard shortcut that are Mac but I want PC. Here they are:
Hi I'm looking for some keyboard shortcut that are Mac but I want PC. Here they are:
ATL + shift + l
ATL + q
ATL + a
ATL + shift + e
ATL + z
ATL + x
ALT + SHIFT + g
ALT + SHIFT + f
they are for mac I them would like for pc... Thank youAh, thanks. Goes to show how carefully I look at keyboards these days...
So Opt(alt) on the Mac should map to Alt on PC.
It would actually be helpful if the OP told us waht the shortcuts were meant to do...
And there's always the help files. A complete list of default shortcusts is at http://helpx.adobe.com/indesign/using/default-keyboard-shortcuts.html -
Hello,
I have 5.6 years of experience in HANA, SAPUI5, ABAP and JAVA/J2EE on SD, MM, SRM, PDM and GRC functionalities.
I have 3 implementation experience with 1 end-to-end implementation.
I am looking for a job in US.
Kindly let me know the procedure to apply for the US jobs with or without sponsers for the H1B visa.
Thanks and Regards,
Vicky.Hi Vicky
Please note that SCN is not a jobs board or place for you to enquire where to job seek.
In relation to visas and working rights, this is information you should be able to seek out
The community may be able to give you general guidance and overview of what's the market is like. Any post advertising jobs, etc will be removed.
Regards
Colleen
SCN Moderators for Careers space -
Looking for LabVIEW job in Beijing,China
Seeks the LabVIEW part time job, if appropriate knocks, it can change to full-time job. The following is the simple introduction,I hoped it can help you to understand me. I had worked for more than 5 years in the China Aerospace Science & Industry Corp. I was engaged in research and development work about the instruments control,Virtual Instrument System Integration,etc.I have finished many projects with LabVIEW. Such as:The Auto Measurement System for People's Liberation Army General Staff Department NO.2. The Time & Frequency Metrology Subsystem of some military project for China Electronics Technology Gropu Corporation 54.(CETC54).The Auto Calibration System for China Aerospace Science & Industry Corp 203 (CASIC203). GPS Rubidium Crystal Oscillator Metrology Auto Measurement System for China Shipbuilding Industry Corporation 750. All of projects have finished the test of army and aerospace. At the same time, I have optimized and improvement the KIT/KPS System for Daya Bay Nuclear Power Operations and Manavement Co.,LtdIn addition, I have finished Auto Measurement Platform for some company. It save 10,000 RMB for the company.I hace finished automatic production line of Fuse for Schneider Electric company. Tips: If the project is very complex and difficult, I can cooperate with my friends. But most projects I can finished by myself.Please contact me, if necessary:Mr.Wang Beijing,ChinaCell Phome:13691203761 Email:[email protected] [email protected]
There is another board for seeking jobs. Why not try looking for it instead of posting the same thing over and over?
As for your first two lines, you may want to consider revising them, should you post the job seeking board. "Seeks the job" -- should be something like "I am seeking a job". I don't know what appropriate knocks are, and I don't think anyone else does, either.
-Matt Bradley
************ kudos always appreciated, but only when deserved ************************** -
Looking for APO training in Detroit area or online
Hello.
I am brand new to SAP, and hoping to learn APO and combine it with my profesisonal experience for a new career direction. I have included a brief summary of my experience and education at the end of this post.
I am looking for a quality online /eLearning course for APO or a live course in the Detroit area to supplement my official SAP Education USA courses. I am much in need of SAP system access / lab setting for practicing etc.
I have taken SAP01 through SAP Education USA, and scheduled for:
SCM130 SAP R/3 Planning and Manufacturing Overview
SCM200 Business Processes in Planning (SCM)
Thank you,
Brian
Brief background:
*Brand new to SAP, and not currently working with it
*Experienced Supply Chain / manufacturing professional, exculsively in a Big Three automotive company (non-manager)
*MBA, (Supply Chain Management concentration)
*MS, Information Technology Management
*Process experience in EDI, JIT, lean, planning, forecasting, scheduling, material releasing
*Cross functional experience in logistics, purchasing, sales and marketing (demand and volume planning)
*Excellent system / technology skills including experience with i2 Integrated Volume Planning (IVP) and Gateline Optimization Product (GOP)Hi Brian,
It is unfortunate but there are no real reliable people for teaching particularly APO. The best bet I would say is sap itself. It is worth every penny. I searched for people all over US and burnt my hands few places as well as they took money but did not teach even what they said. APO itself if fairly new and very few people expertise in it.
Read the material first before going to the certification. I am sure with your background, you should be able to grab the topics fairly easily.I think the only uphill task for you is to understand how SAP deal with the supply chain not understanding the topics of SCM.
All the best. -
Anyone looking for a job using Flex?
Ok - so I have this job I need to fill with a Flex/Flash pro.
I am having the hardest time. Anyone want to work in Waltham, MA??
Thanks
Eric
Responsibilities:
• Apply state of the art Flex and Flash ActionScript
tools and techniques to design and develop Java software solutions
to meet product requirements for next generation underwriter
workbench
• Create cutting edge Rich Internet Application user
interface that will change an industry and establish a new product
category
• Create software to meet or exceed the highest
industry standards for quality
• Work with other superior development team members in
a collaborative, team oriented fashion
• Work with QA team to isolate and resolve defects in a
timely fashion.
Required Skills:
• Superior Flash Actionscript development abilities
• Expert in OOP with AS 3.0
• Experience with Flash remoting is a plus
• Flex 2 Enterprise Service experience
• Flex Builder
• Cutting edge graphical user interface design
abilities
• Proven new product development experience
• Demonstrated ability to meet schedule commitments
with high quality software
• Proven abilities as a contributing member of a high
performing engineering team
• Fast moving, self-motivated, creative thinker with
exceptional process, analytical, engineering and relationship
skills
• Understanding of Java, J2EE, App Servers, Workflow,
Rules Engines, XML technologies
Work Experience:
• 3-8 years experience in Flash technology, including
Flex Enterprise Services
• 3-8 years experience developing enterprise
applications
• Demonstrable ability to produce cutting edge
GUI’s with superior ease of use characteristics
• Insurance domain experience is a plus
Education Expectations:
Bachelor Degree in Computer Science or equivalent
Master’s Degree in Computer Science or equivalent is a
plus
U.S citizenship or Green Card required
DETAILED JOB DESCRIPTION: We are seeking the “best of
the best” Flex developers to be part of this well-funded
innovative software development startup company. We are developing
breakthrough vertical Rich Internet Application software based on
state of the art technologies (Flash 9, Flex 2 Enterprise Services,
AS3, SOA, Eclipse, etc.). We are creating an industry leading
next-generation insurance underwriting platform for a drastically
underserved market. And we are having fun doing it!
Though we are still in early development, our Underwriting
Management System has met with rave reviews from the customer and
VC community. We are on our way to establishing a new product
category and dominating that market! If you are a superior Flex
programmer with an entrepreneurial spirit, we invite you to
continue reading about this great opportunity.
We are currently selecting members a high performance
engineering team to create breakthrough products. We are using
iterative Agile development techniques to create superior quality
products to lead in our target market. By hiring only the best
development team members available, we are creating a superior work
environment in terms of productivity and quality of work life.
As a startup, we are able to offer meaningful equity in this
high potential company as a key element in a competitive
compensation package. We also provide company supported health
insurance, 401K, dental insurance, disability insurance, life
insurance, competitive vacation and holidays.Moved to Private Message
-
[ANN] Adobe is looking for developers in the Boston area for a User Research study
Adobe User Research is looking for developers in the greater
Boston area. We will be running site visits the week of February
11th and would love to spend two-hours with you at your place of
work. What we are looking to do is get a better understanding of
how you work, what your processes are in your natural environment.
We will gladly thank you with some Adobe software as well as
some other Adobe goodies. If you are interested in our study and
are able to host a small team of Adobe User Researchers please send
me an email at
[email protected]
Please note that we are looking to run these studies the week
of February 11th.
If you have any questions at all, please do not hesitate to
email me at
[email protected]If you come to the Ann Arbor area, give me a call (University
of Michigan)
"Tim Toy" <[email protected]> wrote in
message
news:fntr3u$d3j$[email protected]..
> Adobe User Research is looking for developers in the
greater Boston area.
> We
> will be running site visits the week of February 11th
and would love to
> spend
> two-hours with you at your place of work. What we are
looking to do is
> get a
> better understanding of how you work, what your
processes are in your
> natural
> environment. We will gladly thank you with some Adobe
software as well as
> some
> other Adobe goodies. If you are interested in our study
and are able to
> host a
> small team of Adobe User Researchers please send me an
email at
> [email protected]
>
> Please note that we are looking to run these studies the
week of February
> 11th.
>
> If you have any questions at all, please do not hesitate
to email me at
> [email protected]
>
>
>
>
> -
My Mac Book Pro Address Book has multiple addresses for the same person from syncing before I cloud. When I try to "look for duplicates" it returns "no duplicates found" why does that happen? How can I correct it?
For which version of Mail and OS?
-
Looking for Director author in Dallas area
I have been trying to find a Director Author in the Dallas
area, but haven't found one yet. Does anyone know of
someone?Amith wrote:
> Can I do it via internet?
> Contact me use email and MSN: [email protected]
> Thanks.
I do Director projects locally as well as in collaboration
with people in
different parts of the world. Working remotely is not that
difficult in
today's age. However, there are still times when someone
local is vital to
the project co-ordination and outcome.
regards
Dean
Director Lecturer / Consultant / Director Enthusiast
http://www.deansdirectortutorials.com/
http://www.multimediacreative.com.au
email: [email protected] -
Looking for the free apps that are supposed to come with MacBook.
I was told instead of a recieving a CD I had to download software like iPhoto from iTunes. The only option I see is to pay for it. I was told it was included. What am I missing?
When I got my Late 2011 MBP in Dec., it had Lion and did NOT have any of the iLife components. After I migrated all my stuff from the corpse of my Early 2008 MBP with Leopard, lo and behold, iLife sprang to life again. And was even allowed to upgrade each component to the latest version, via the App Store, for free.
Maybe you are looking for
-
Connecting PS3 to iMac 21.5
I have a late 2008 iMac (21.5 inch) and I want to connect my PS3 to it and I wonder if any one has a way to do it.
-
Check Printing without creating Vendor
Hi, We print check by creating vendor (which is a standard practice). Could you pl sugest me the wayout where I can directly Debit Expenses account and issue check in the name of Vendor. eg. I want to make a payment for Advertisement without creating
-
Creating addon installers for SBO 9.0 64-Bit (AddOnInstallAPI_x64)
Hi guys, I experience some challenge getting my addon to install successfully on a 64-bit SBO 9.0 I noticed there are a couple of discussions touching on this very subject. So I have successfully installed my addon on the 32-bit edition of SBO 9.0 My
-
Hi, I have a file (PO details)from which i create multiple idoc. The structure of file and idoc is as follows --BATCH ---HEADER ITEM --/BATCH IDOC IS --IDOC ---BATCH HEADER ITEM now in order to get multiple idoc from the file structure i c
-
Hi, I have a script which imports XML and formats it. As part of the formatting, there's numerous GREP searches which remove redundant spaces, returns and so on. One in particular crashes InDesign and it's driving me nuts. It's supposed to remove red