CLAD Exam retake after 1st attempt

If CLAD Exam failed at first attempt, when we can take next CLAD exam(one week or two weeks or three weeks)??
Thanks
Jack_Jav

mohammed arif ahmed wrote:
Hi Muks,
I attended two days back my CLAD exam, but i could score passing mark ie 67/70, so i want to know i can take next week my second attempt or not?, because here in my area the testing center guy told me u can take second attempt after 15 days only as per NI policy, Is it true? only after 15 days we have to take second attempt???
Thanks
Jack_Jav
It may be because of the available slot or they might have changed it now. One most likely case is that they change the questions every 15 days or something like that.

Similar Messages

  • HT1212 my itouch ,1st generation decided to not accept my password and after 3 attempts it told me ipod deactivated try again in 7,170,560,345 minutes any suggestions to something that seems to have taken on a life of its own ?

    my itouch ,1st generation decided to not accept my password and after 3 attempts it told me ipod deactivated try again in 7,170,560,345 minutes any suggestions to something that seems to have taken on a life of its own ?

    Read this.

  • CLAD Exam

    In about 24 hours I'm going to take the CLAD exam for NI certification. I had talked casually to our NI rep about this on the phone last week and was told I'd breeze through it with my experience. I guess, with that in mind I did not put any prep time in for the test until now, the night before. To be honest, after just taking the LV fundamentals exam online and the CLAD sample exam, I believe I've underestimated the prep time needed. Are there others out there that have taken the CLAD? If so, I'd be curious as to what you thought of the exam and how much time you spent preparing for it. Maybe I'm just spooking myself.

    Ben,
       You didn't take the minute or so to reconfigure to your familiar environment, like during the code off? A good friend of mine didn't  pass the CLD for that reason. As to whether they will be having the exam in a specific version, it may depend on the exam site. Where I took it (at one of the select integrators in my area) they had just set up  the computers, so they had 7.1 on them (last spring). They didn't have floppies on the computers, which possed a problem when we were to finish up as we were supposed to save the exam to floppie and put it in a sealed envelope to send to NI.  You definitely want to be familiar with the environment, much of the difficulty passing the exam has to do with the time available to complete the exam. Unfortunately, in their wisdom, NI hasn't made it easy to configure LV 8's  environment to resemble the old versions :-( May help the newbies, but it definitley causes lost time for those of us who have gotten to "touch wiring" familiarity with the previous layout.
    P.M.
    Putnam
    Certified LabVIEW Developer
    Senior Test Engineer
    Currently using LV 6.1-LabVIEW 2012, RT8.5
    LabVIEW Champion

  • CLAD exam question for recent test takers

    I have scheduled for a CLAD exam.  I have been reading many questions posted on LAVA and NI forum, working on  example exams but still not very confident. Especially, after seeing people saying the actual exam was much harder than the two sample exams on NI. I wonder if it is true for recent exam (Summer, Fall 2011)?  If anyone who just took the test, please verify this information
    Solved!
    Go to Solution.

    As for that, I would like to add a question to this thread:
    Am I able to recive any help on the exam if there are some words I don't understand? Like getting them translated for me or something?
    I'm familiar with most of LabVIEW's terminology, but not all the other complex words used in the example exams. 
    Like this for an example:
    The words I've marked is not trivial to me, and I'd might fail this type of question on the CLAD exam
    Regards,
    Even
    Certified LabVIEW Associate Developer
    Automated Test Developer
    Topro AS
    Norway

  • Hi I am having problems downloading and updating apps on my iPad and iPhone. The message cycles between waiting and loading then I get an error message saying unable to download app. Eventually,after many attempts it works.

    Hi Guys - for a few days I have been having problems downloading and updating apps on my iPad and iPhone. The message cycles between waiting and downloading then eventually says unable to download app. Sometimes after many attempts it wil eventually work. I tested it on an old iPhone 3G and got the same problem so it is not an iOS 5 issue. My WI-FI connection is working fine. I was wondering if this is an App Store problem? Anyone else in the UK having this problem?

    Hi John
    iTunes Support wasn't of any use to me.
    I have also been having another problem - with BBC iPlayer and other video streaming not working due to insufficient bandwidth, despite my overall download speed being consistently around 50Gb.  This is also affecting AppleTV downloads
    I am using Virgin Media as my ISP, and was wondering whether you do as well.  This might be the common thread.
    -Bernard

  • I have forgotten my password to unlock my screen, after several attempts my ipad is now disabled, how can I fix this

    I have forgotten my password to unlock my screen, after several attempts my IPAD is now disabled, does anyone know how I can fix this?

    If you cannot remember the passcode, you will need to Restore your device...
    Connect to iTunes on the computer you usually Sync with and Restore...
    http://support.apple.com/kb/HT1414
    If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/HT1808

  • Can you create apps after 1st May 2015 using Adobe DPS single edition?

    Can you create apps after 1st May 2015 using Adobe DPS single edition?
    I currently have SE via creatieve cloud - one of the only reasons we switched to CC was for the DPS SE.
    Does anyone know if this capability will just be 'switched off' at midnight 1st May 2015?? There are huge costs for going the enterprise route but with no date in sight for Publish to be launched I am not sure I can wait for this, or should I???

    Adobe states: Please note that the Digital Publishing Suite, Single Edition, service will be available for use until May 1, 2015, but beyond that date the service will no longer be available.
    So essentially my licence will expire on 1st May - Adobe's note just mentions 'service' -  even though part of CC and I will not be able to maintain my app or create any more IPA's after 1st May. I can't beleive there is nothing to switch over to other than paying thousands of pounds for enterprise??
    Just all so vauge, feels like a plug is going to be pulled and thats it??? Maybe I am missing something?

  • Good day! I have an iPod touch 4G and after many attempts I managed to updated it to ver. 6.1.5.

    Good day!
    I have had an iPod touch  version 4.1.2 for almost 4 years and after many attempts I manage to upated it to version 6.1.5.
    I then created an account with iCloud so that I could have my backups done directly to iCloud.
    I then restore the iPod to the backup I had on my computer but although it copied the photos, notes, contacts tc. it didn't copy the music I had on it.
    When I tried to sync my music from my iTunes on my PC I got a message stating that my iPod was previously sync to a DarklordPC, not a clue of who's PC this is and it's the first time this message came up. It gave me the option of erasing the sync of the DarklordPC and go ahead with a new sync, which I did, but it didn't sync at all.
    I've retried to sync numerous times and it tries to sync but after a few seconds it just stops.
    Can anyone help me please...I'm going crazy without my music

    You should have done this.
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
    Syncing to a "New" Computer or replacing a "crashed" Hard DriveSynced media like apps and music are not included in the iPod backup that iTunes makes and they restore from backup will not restore synced media unless the media is in the iTunes library.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store    

  • Error message when I try to convert pdf to excel, after three attempts I could only convert one file.

    Error message when I try to convert pdf to excel, after three attempts I could only convert one file.

    Hi pdf to excel,
    What is the error that you're receiving when you try to convert? Is it the "Conversion Failure" message? Can you tell me more about the files you're unable to convert? What application created the PDFs? Are there many pages in these these files, or a complex mix of text and graphics?
    It'll also be helpful to know whether you're converting via the ExportPDF website (and what browser you're using), or through Adobe Reader.
    I look forward to hearing back from you, so we can get to the bottom of this!
    Best,
    Sara

  • Nokia Lumia 928 apparently died after an attempted Windows 8.1 update.  Replacement phone arrived the next day.  How can I restore my contacts, photos, etc.?  Backup assistant is no help and I don't know how to access the Cloud.

    Nokia Lumia 928 apparently died after an attempted Windows 8.1 update.  Replacement phone arrived the next day.  How can I restore my contacts, photos, etc.?  Backup assistant is no help and I don't know how to access the Cloud.

    Did you have the phone set to backup things to the One Drive on Microsoft servers?

  • Recently I was working on my home Network and lost my Password for my Home wireless connection. After many attempts, I remembered the password and was able to get in. Now the MacBook Pro only works at home on a Hard wire connection. I have an additional 9

    Recently I was working on my home Network and lost myPassword for my Home wireless connection. After many attempts, I remembered thepassword and was able to get in. Now the MacBook Pro only works at home on aHard wire connection. I have an additional 9 devices on the same network, allare functioning properly. The Air connection works fine at any other Networksout side the Home connection. I did a PRAM reset, deleted the Network profileand rebuilt in System Preferences. Still unable to connect wireless on Homenetwork. Any Ideas?

    I seem to have fixed it by putting <div  class="clearfloat"></div> after the navigation bar?

  • What are the CLAD exam topics?

    Hi guys,
    Here I am a bit confised about the topics covered in CLAD exam. My confusion comes from the fact that in the NI site for preparation guidlines the topics outlined are as follows:
    Exam Topics (Outline):
    LabVIEW programming principles
    LabVIEW environment
    Data types, software constructs, and Graphical User Interface (GUI) elements
    Variables and functions
    Simple design patterns
    SubVI design
    VI design and documentation
    Error handling
    Debugging tools and techniques
    But if you scroll down at the bottom of the page is a download link with a PDF file. I've attached this file to this message.
    In it the topics outlined include much more advances ones from Intermediate I and II such as event driven programming, TCP/UDP, Data Sockets, Custom Error generation, VI and application reference, dinamicaly loading of subVI and so on.
    Can somebody who has passed this exam recently clarify me with what exactly is included in CLAD?
    I'll be very thankful to any input because in 10 days I have to go and pass it.
    Thanks, Slavie

    Hi Slavie,
    The topics for the CLAD are those you cited in your post :
    slavie a écrit:
    Exam Topics (Outline):
    LabVIEW programming principles
    LabVIEW environment
    Data types, software constructs, and Graphical User Interface (GUI) elements
    Variables and functions
    Simple design patterns
    SubVI design
    VI design and documentation
    Error handling
    Debugging tools and techniques
    The other topic you saw in the pdf file you mentioned might be part of CLD et CLA (which are quite different from CLAD)
    Hope this helps
    When my feet touch the ground each morning the devil thinks "bloody hell... He's up again!"

  • Time Machine Locked after MacBook Air reformatted. My MacBook Air was overfull due to an Address book issue (duplication) so after many attempts to clear space, I ended up wiping out the system and reloading Lion.

    Time Machine Locked after MacBook Air reformatted. My MacBook Air was overfull due to an Address book issue (duplication) so after many attempts to clear space, I ended up wiping out the system and reloading Lion. This resulted in the Time Machine thinking that it was now connected to a different computer. Apparently this diables the existing information. 
    Now I can see that the back-ups exist (back to Sept 2012) but they are greyed out, therefore unavailale to restore. Again, this seems like an issue that shouldn't be happening. The whole point of the Time Machine is to enable reinstatement of data after catastrophic failure. What if my computer actually had to be replaced due to a hardware issue? How would I beableto restore anything?
    The path already (unsuccessfully) taken;
    Open Library on the computer, Open Time Machine, Select Correct date, drill down to correct data you wish to restore, click "Restore".
    This did not work because the correct date was greyed out. Restore key was greyed out.

    Time Machine Locked after MacBook Air reformatted. My MacBook Air was overfull due to an Address book issue (duplication) so after many attempts to clear space, I ended up wiping out the system and reloading Lion. This resulted in the Time Machine thinking that it was now connected to a different computer. Apparently this diables the existing information. 
    Now I can see that the back-ups exist (back to Sept 2012) but they are greyed out, therefore unavailale to restore. Again, this seems like an issue that shouldn't be happening. The whole point of the Time Machine is to enable reinstatement of data after catastrophic failure. What if my computer actually had to be replaced due to a hardware issue? How would I beableto restore anything?
    The path already (unsuccessfully) taken;
    Open Library on the computer, Open Time Machine, Select Correct date, drill down to correct data you wish to restore, click "Restore".
    This did not work because the correct date was greyed out. Restore key was greyed out.

  • I have installed ios7 on my iPad 4. After installation it asked me pass code which I have never set. After multiple attempts it is disabled. I don't have backup on my iCloud or iTunes. Is there anyone who can help to enable it or to reverse iPad to ios6.

    I have installed ios7 on my iPad 4. After installation it asked me a pass code which I have never set. After multiple attempts it is disabled. I don't have backup on my iCloud or iTunes. Is there anyone who can help to enable it or to reverse iPad to ios6. I asked Apple store & tech said to format it but I will lose all the data..!

    Thanks for that. Much more constructive than the last comment. It's only the restriction code I can't recall, not the access passcode. So I can currently access the device, just not age restricted content. Does that's make a difference? I also wondered if anyone knew how many attempts you get to try to get it right. Now tried 21 times and so far nothing bad has happened but I am concerned I'll eventually be completely locked out of the device. That doesn't seem in the spirit of things though. Surely it's foreseeable that a child could repeatedly try to guess the code so I can't see that it would be right to lock the device down completely in that circumstance, particularly if the access code is being typed in correctly every time.
    Thanks

  • HT1212 how do you get the photos off your phone when it is recovery mode? My daughter has put a passcode on the 4s iphone and cant remember. After multiple attempts and then resorting to this support forum "iOS: Forgotten passcode or device disabled after

    My daughter has put a passcode on her dads iphone 4s and cant remember it and after multiple attempts it is now in "connect to itunes. My husband does not want to lose the photos on it. Is there a way to get photos off before restoring

    If that phone has been synced in iTunes, you can restore from the backup after having restored the phone.
    There is also a little mac app that can read the iPhone backups that are in iTunes,called ibackupviewer.
    Then when there is no backup of the iPhone: read the following aricle:
    http://www.video-converter-mac.org/recover-notes-from-iphone/

Maybe you are looking for

  • Issue with 'text box' in rtf sub template for peoplesoft XMLP

    Hi all, i have a weired problem using 'text Box' in a sub template. I am calling a sub template from my template. In my Sub template i have a text box ( i am using text box bcoz i want to justify the text not to the page margin but starting from a sp

  • Sorting music chronologically within artist

    ON my IPad2, I group my albums by artist. But the. The albums appear alphabetically within artist, and I want them to sort chronologically within artist. And I see no way to do that. Am I just missing something obvious? I don't use playlists; I just

  • Unable to open xls (Excel) file in Number

    Hi all, I just purchsed Number to open excel file in my Imac but after install try to open. it's say  "can't be open" can anyone help me bcz i'm new to imac so tel me know how i can open it... if i can't i want refund bcz not worth for me...

  • Boolean operators in the WHERE clause

    I'd like to create an operator which would allow me to use the following syntax in the where clause: select 1 from dual where iplike('172.16.0.128', '*.*.*.*'); I've created a function (iplike_bool_fn) to implement my desired check, and attempted to

  • Any report or Table to see orders with BP partner functions  in SAP CRM?

    Hello All, Could anyone help me  in getting  the table or any report  for orders with BP partner functions in SAP CRM? Would appreciate replying at the earliest. Cheers Sreedhar