CLAD with MS in Electronics/Electrical engg looking for better opportunities

Question

Priyanka Chaudhary
ob/4 wardens' residence medical boys hostel campus, near white church colony, Indore(M.P)-452001
[email protected]
OBJECTIVE:
==========
Seeking position as Labview Developer
EDUCATION
==========
Master of Science in Electrical Engineering
University of Kentucky, Lexington, KY.( G.P.A. 3.5/4.0)
May 2010
B.E. Electronics and Communications Engineering
Rajiv Gandhi Technical University, India
First Class with Honors G.P.A. 4.0/4.0
June 2007
SKILL SET
==========
Programming Languages: Labview (2011,2010,8.6),Simulink,VHDL, Verilog , C , C++, VC++, MATLAB C#,HTML, ASP.Net 4.0, Assembly Language
Development and Simulation Tools: Labview, Xilinx ISE, ModelSim, MATLAB, MS office Suite, VS .Net
Hardware: NI cRIOs, NI CDAQ, NI C-form thermocouple ,IEPE and strain gauge modules etc.,8085/8086 Processors, 8051/8951 Microcontrollers
WORK EXPERIENCE
===============
1)Assistant Manager, VE Commercial Vehicles Ltd. (OEM), Pithampur, July 2010-Present
-Certified Labview Associate Developer (CLAD) [Serial Number:100-311-4045; Issue date: Dec 29,2011;Expiration date: Dec 28 2013]
-Part of the software development team in the Vehicle Validation and testing Division
-Developed and deployed software in Labview for Testing Rigs required in the Fatigue and Endurance Labs.
-Attended Labview Core1 & Core2 training and preparing for Certified Labview Associate Developer exam (CLAD).
-Projects include:
--software development for Clutch endurance test using Master/Slave architecture;
--system identification, iteration and drive-file generation from RLD for Cabin testing on Moog Controller;
--Test Sequence generation for suspension leaf spring endurance and Front Axle endurance tests;
--R&D of Stewart’s Platform(Multi-Axis Shaker Table) in Simulink using Pro-E/CAD model and validation of the model parameters for Rig development in Labview.
--Single-handedly designed and deployed endurance test application on FPGA target using Labview 2011 using Modbus as communication protocol between variable frequency drives(ABB) and motors.
-Designed software utility manuals for rig operators.
2) IT consultant, Libsys Consultancy, Chicago, USA ,Sep 2010-March 2011
-Worked as Dot net developer apprentice/consultant for client (Thomson Reuters ) in Minnesotta,USA.
-Worked on Models –View-Controllers architecture to design Web applications.
3)Graduate Research Assistant, University of Kentucky, May 2008 - Aug 2010
Thesis : Spheroid detection in 2D images using Circular Hough Transform
-Collaborated with National Cancer Institute and the dept. of Opthalmology to prepare High Content –High Throughput Screening Assay (3D-ECSA) analysis platform.
-Ran an automated test bench with a motorized camera (VC++, MFC) for the assay analysis and image acquisition.
-Synthesized data stochastically similar to original, to increase the databank.
-Developed algorithm (MATLAB) to detect spheroids in data images using Circular Hough Transform.
-Demonstrated measures to classify identified spheroids according to shape and symmetry.
-Involved extensive application of Image Processing techniques.
4)Graduate Assistant, Graduate Housing Resident Manager, University of Kentucky,Feb 2010- May 2010
Responsibilities include, resolution of conflicts, inspections, attending to resident requests and acting as a bridge between the 100+ residents and housing body.
ACADEMIC PROJECTS
==================
1)Design and implementation of 2 special purpose processors,Spring 2008
-Designed two special purpose processors in VHDL in Xilinx ISE
-These were non-programmable and were designed to execute a repetitive custom logic
-Simulation was done in ModelSim and tested on Xilinx Virtex 5.1 FPGA.
2)Wireless Datacommunication between terminals using Frequency hopped spread spectrum,Spring 2007
-Prepared and etched PCBs for circuit base;
-Soldered HT-12 encoders/decoders, transceivers and PLL ICs to the PCBs to form a FHSS transceiver circuit
-Involved electronics and communication principles.
-Demonstrated the working of the units for duplex communication
PUBLICATIONS
=============
Correlation based swarm trackers for 3-dimensional manifold mesh formation
SPIE April 13,2009. Vol:7340 2009
RELEVANT COURSEWORK
===================
Graduate:
Digital Signal Processing, Deterministic systems, Real-time Embedded systems, VHDL, Antenna Design, Solid state electronics,
Electromagnetic field theory.
Undergraduate:
Mobile Communications, Satellite Communications, Fiber Optics, Microwave Circuits, Data Compression and Encryption, Microprocessors and Microcontrollers, Microelectronics, Digital Logic Design, Electronics
Attachments:
Priyanka_Chaudhary_resume_LABVIEW.pdf ‏130 KB

Answer 1

Message Edité par salimo le 11-04-2009 04:36 PM
~~~~~~~~~~~~~~~~~~Looking for a LABVIEW JOB (In EUROPE)>~~~~~~~~~~~~~~~~~~
**The Best Way To Predict**The**Future Is To Invent It**