Claim Adjustments

Hello
When the employees are not regular, i.e., they are absent for one or two months, and their payroll is not processed for those months, multiple claims are displayed. Claims are displayed when deduction is more than earnings. If an employee is regular and in his subsequent month the earning exceed deductions, the claims part is automatically adjusted and there is no problem. But if he is irregular, then the claims (say Rs. 1000) in one month (say in April) is again shown in subsequent months (say May & June) when his salary are not processed and it appears . When the salary is processed in July, it shows a claims of Rs. 3000/-.
So please let me know how to adjust the claims for irregular employees.

Hi,
For this ireegular employee you can recover this claims amount outside the system.
Then you can put a same payment amount in IT0015 and adjust the amount.
Thanks,
Sutapa.

Similar Messages

  • "The file is damaged and could not be repaired" error when trying to open a PDF in Reader

    A few of our employess (only 3 out of over 100 so far) have been getting the error, "The file is damaged and could not be repaired" when trying to open some PDFs. Other people are able to open the same PDF files with no error. It's happening on about 10% of the time. I've read a bunch of threads here with this isue and tried some suggested fixes and nothing has resolved the issue. Here is what I have found works and does not work and the info on their computers:
    Computers:
    1 Dell Vostro desktop running WIndows 7
    1 Toshiba Satellite C55 runnign Windows 8
    1 Samsung ATIV Book 4 running Windows 8
    All using Adobe Reader XI but we did uninstall that version and tried previous versions and still got the error.
    Did Not Work:
    As suggested by the company that we use online for claims adjustments where this error is occuring, we tried using a different PDF creator since the files were created using a free PDF creator by the employees. PDF995 and PDFcreator (pdfforge) did not resolve the issue. I then created the PDFs with my Adobe Acrobat, uploaded from my computer to the online program, and that did not resolve the issue.
    Saving the file to hard drive and then opening in Adobe did not work.
    Turning off Protected Mode and Enhanced Security did not work.
    Compatibility View settings enabled in Internet Explorer 10 did not resolve the issue. The previously mentioned claims adjustment software company we use online was code for IE so is not fully compatible with other browsers.
    That being said I did try to open the PDF files in Chrome and it also did not work. Same error message.
    Does work:
    I download the file they cannot open onto my hard drive, open in Adobe Acrobat, Save as a pdf, then email it to them and they can open it via email attachment.
    If they close the error and continue trying to open the file over and over sometimes it will eventually open.
    Is there a setting in Windows that is preventing them from opening a small % of files some of the time? Thanks in advance for any help!
    James

    If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
    The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
    Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

  • Issue with SharePoint foundation 2010 to use Claims Based Auth with Certificate authentication method with ADFS 2.0

    I would love some help with this issue.  I have configured my SharePoint foundation 2010 site to use Claims Based Auth with Certificate authentication method with ADFS 2.0  I have a test account set up with lab.acme.com to use the ACS.
    When I log into my site using Windows Auth, everything is great.  However when I log in and select my ACS token issuer, I get sent, to the logon page of the ADFS, after selected the ADFS method. My browser prompt me which Certificate identity I want
    to use to log in   and after 3-5 second
     and return me the logon page with error message “Authentication failed” 
    I base my setup on the technet article
    http://blogs.technet.com/b/speschka/archive/2010/07/30/configuring-sharepoint-2010-and-adfs-v2-end-to-end.aspx
    I validated than all my certificate are valid and able to retrieve the crl
    I got in eventlog id 300
    The Federation Service failed to issue a token as a result of an error during processing of the WS-Trust request.
    Request type: http://schemas.xmlsoap.org/ws/2005/02/trust/RST/Issue
    Additional Data
    Exception details:
    Microsoft.IdentityModel.SecurityTokenService.FailedAuthenticationException: MSIS3019: Authentication failed. ---> System.IdentityModel.Tokens.SecurityTokenValidationException:
    ID4070: The X.509 certificate 'CN=Me, OU=People, O=Acme., C=COM' chain building failed. The certificate that was used has a trust chain that cannot be verified. Replace the certificate or change the certificateValidationMode. 'A certification chain processed
    correctly, but one of the CA certificates is not trusted by the policy provider.
    at Microsoft.IdentityModel.X509CertificateChain.Build(X509Certificate2 certificate)
    at Microsoft.IdentityModel.Tokens.X509NTAuthChainTrustValidator.Validate(X509Certificate2 certificate)
    at Microsoft.IdentityModel.Tokens.X509SecurityTokenHandler.ValidateToken(SecurityToken token)
    at Microsoft.IdentityModel.Tokens.SecurityTokenElement.GetSubject()
    at Microsoft.IdentityServer.Service.SecurityTokenService.MSISSecurityTokenService.GetOnBehalfOfPrincipal(RequestSecurityToken request, IClaimsPrincipal callerPrincipal)
    --- End of inner exception stack trace ---
    at Microsoft.IdentityServer.Service.SecurityTokenService.MSISSecurityTokenService.GetOnBehalfOfPrincipal(RequestSecurityToken request, IClaimsPrincipal callerPrincipal)
    at Microsoft.IdentityServer.Service.SecurityTokenService.MSISSecurityTokenService.BeginGetScope(IClaimsPrincipal principal, RequestSecurityToken request, AsyncCallback callback, Object state)
    at Microsoft.IdentityModel.SecurityTokenService.SecurityTokenService.BeginIssue(IClaimsPrincipal principal, RequestSecurityToken request, AsyncCallback callback, Object state)
    at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustServiceContract.DispatchRequestAsyncResult..ctor(DispatchContext dispatchContext, AsyncCallback asyncCallback, Object asyncState)
    at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustServiceContract.BeginDispatchRequest(DispatchContext dispatchContext, AsyncCallback asyncCallback, Object asyncState)
    at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustServiceContract.ProcessCoreAsyncResult..ctor(WSTrustServiceContract contract, DispatchContext dispatchContext, MessageVersion messageVersion, WSTrustResponseSerializer responseSerializer, WSTrustSerializationContext
    serializationContext, AsyncCallback asyncCallback, Object asyncState)
    at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustServiceContract.BeginProcessCore(Message requestMessage, WSTrustRequestSerializer requestSerializer, WSTrustResponseSerializer responseSerializer, String requestAction, String responseAction, String
    trustNamespace, AsyncCallback callback, Object state)
    System.IdentityModel.Tokens.SecurityTokenValidationException: ID4070: The X.509 certificate 'CN=Me, OU=People, O=acme., C=com' chain building
    failed. The certificate that was used has a trust chain that cannot be verified. Replace the certificate or change the certificateValidationMode. 'A certification chain processed correctly, but one of the CA certificates is not trusted by the policy provider.
    at Microsoft.IdentityModel.X509CertificateChain.Build(X509Certificate2 certificate)
    at Microsoft.IdentityModel.Tokens.X509NTAuthChainTrustValidator.Validate(X509Certificate2 certificate)
    at Microsoft.IdentityModel.Tokens.X509SecurityTokenHandler.ValidateToken(SecurityToken token)
    at Microsoft.IdentityModel.Tokens.SecurityTokenElement.GetSubject()
    at Microsoft.IdentityServer.Service.SecurityTokenService.MSISSecurityTokenService.GetOnBehalfOfPrincipal(RequestSecurityToken request, IClaimsPrincipal callerPrincipal)
    thx
    Stef71

    This is perfectly correct on my case I was not adding the root properly you must add the CA and the ADFS as well, which is twice you can see below my results.
    on my case was :
    PS C:\Users\administrator.domain> $root = New-Object System.Security.Cryptography.X509Certificates.X509Certificate2("C:\
    cer\SP2K10\ad0001.cer")
    PS C:\Users\administrator.domain> New-SPTrustedRootAuthority -Name "domain.ad0001" -Certificate $root
    Certificate                 : [Subject]
                                    CN=domain.AD0001CA, DC=domain, DC=com
                                  [Issuer]
                                    CN=domain.AD0001CA, DC=portal, DC=com
                                  [Serial Number]
                                    blablabla
                                  [Not Before]
                                    22/07/2014 11:32:05
                                  [Not After]
                                    22/07/2024 11:42:00
                                  [Thumbprint]
                                    blablabla
    Name                        : domain.ad0001
    TypeName                    : Microsoft.SharePoint.Administration.SPTrustedRootAuthority
    DisplayName                 : domain.ad0001
    Id                          : blablabla
    Status                      : Online
    Parent                      : SPTrustedRootAuthorityManager
    Version                     : 17164
    Properties                  : {}
    Farm                        : SPFarm Name=SharePoint_Config
    UpgradedPersistedProperties : {}
    PS C:\Users\administrator.domain> $cert = New-Object System.Security.Cryptography.X509Certificates.X509Certificate2("C:\
    cer\SP2K10\ADFS_Signing.cer")
    PS C:\Users\administrator.domain> New-SPTrustedRootAuthority -Name "Token Signing Cert" -Certificate $cert
    Certificate                 : [Subject]
                                    CN=ADFS Signing - adfs.domain
                                  [Issuer]
                                    CN=ADFS Signing - adfs.domain
                                  [Serial Number]
                                    blablabla
                                  [Not Before]
                                    23/07/2014 07:14:03
                                  [Not After]
                                    23/07/2015 07:14:03
                                  [Thumbprint]
                                    blablabla
    Name                        : Token Signing Cert
    TypeName                    : Microsoft.SharePoint.Administration.SPTrustedRootAuthority
    DisplayName                 : Token Signing Cert
    Id                          : blablabla
    Status                      : Online
    Parent                      : SPTrustedRootAuthorityManager
    Version                     : 17184
    Properties                  : {}
    Farm                        : SPFarm Name=SharePoint_Config
    UpgradedPersistedProperties : {}
    PS C:\Users\administrator.PORTAL>

  • Internal server error while raising a claim request.

    Dear All,
    I am using claims and we have implemented badi for finding the approver and sending the request.
    Here after implementing the Badi, i am getting internal server error as this.
    While processing the current request, an exception occured which could not be handled by the application or the framework.
    If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
    Root Cause
    The initial exception that caused the request to fail, was:
       com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: Error in module RSQL of the database interface., error key: RFC_ERROR_SYSTEM_FAILURE
        at java.lang.Throwable.<init>(Throwable.java:179)
        at java.lang.Error.<init>(Error.java:37)
        at com.sap.pcuigp.xssfpm.java.FPMRuntimeException.<init>(FPMRuntimeException.java:46)
        at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:103)
        at com.sap.ess.in.claims.fc.FcPowerClaims.callRFC_Emp_Action(FcPowerClaims.java:421)
        ... 53 more
    See full exception chain for details.
    System Environment
    Client
    Web Dynpro Client Type HTML Client
    User agent Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; GTB5; QS 4.2.2.3; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648)
    Version null
    DOM version null
    Client Type msie7
    Client Type Profile ie6
    ActiveX enabled
    Cookies enabled
    Frames enabled
    Java Applets enabled
    JavaScript enabled
    Tables enabled
    VB Script enabled
    Server
    Web Dynpro Runtime Vendor: SAP, build ID: 7.0017.20080829103545.0000 (release=645_VAL_REL, buildtime=2008-09-17:13:14:54[UTC], changelist=499141, host=pwdfm101), build date: Fri Mar 13 11:09:42 IST 2009
    J2EE Engine 7.00 patchlevel 112614.44
    Java VM Classic VM, version:1.4, vendor: IBM Corporation
    Operating system OS/400, version: V6R1M0, architecture: PowerPC
    Session & Other
    Session Locale en_US
    Time of Failure Thu Apr 23 18:47:54 IST 2009 (Java Time: 1240492674705)
    Web Dynpro Code Generation Infos
    sap.com/pb
    SapDictionaryGenerationCore 7.0017.20061002105236.0000 (release=645_VAL_REL, buildtime=2008-09-17:13:01:31[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
    SapDictionaryGenerationTemplates 7.0017.20061002105236.0000 (release=645_VAL_REL, buildtime=2008-09-17:13:01:37[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
    SapGenerationFrameworkCore 7.0017.20060719095755.0000 (release=645_VAL_REL, buildtime=2008-09-17:12:48:53[UTC], changelist=411255, host=PWDFM101.wdf.sap.corp)
    SapIdeWebDynproCheckLayer 7.0017.20080801093115.0000 (release=645_VAL_REL, buildtime=2008-09-17:13:07:06[UTC], changelist=495367, host=PWDFM101.wdf.sap.corp)
    SapMetamodelCommon 7.0017.20061002105432.0000 (release=645_VAL_REL, buildtime=2008-09-17:12:49:40[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
    SapMetamodelCore 7.0017.20061002105432.0000 (release=645_VAL_REL, buildtime=2008-09-17:12:49:34[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
    SapMetamodelDictionary 7.0017.20060719095619.0000 (release=645_VAL_REL, buildtime=2008-09-17:12:58:48[UTC], changelist=411251, host=PWDFM101.wdf.sap.corp)
    SapMetamodelWebDynpro 7.0017.20080801093120.0000 (release=645_VAL_REL, buildtime=2008-09-17:13:03:59[UTC], changelist=495368, host=PWDFM101.wdf.sap.corp)
    SapWebDynproGenerationCTemplates 7.0017.20080829103545.0000 (release=645_VAL_REL, buildtime=2008-09-17:13:16:41[UTC], changelist=499141, host=pwdfm101)
    SapWebDynproGenerationCore 7.0017.20080801093115.0000 (release=645_VAL_REL, buildtime=2008-09-17:13:07:12[UTC], changelist=495367, host=PWDFM101.wdf.sap.corp)
    SapWebDynproGenerationTemplates 7.0017.20080829103545.0000 (release=645_VAL_REL, buildtime=2008-09-17:13:16:41[UTC], changelist=499141, host=pwdfm101)
    sap.com/tcwddispwda
    No information available null
    sap.com/pb_api
    SapDictionaryGenerationCore 7.0017.20061002105236.0000 (release=645_VAL_REL, buildtime=2008-09-17:13:01:31[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
    SapDictionaryGenerationTemplates 7.0017.20061002105236.0000 (release=645_VAL_REL, buildtime=2008-09-17:13:01:37[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
    SapGenerationFrameworkCore 7.0017.20060719095755.0000 (release=645_VAL_REL, buildtime=2008-09-17:12:48:53[UTC], changelist=411255, host=PWDFM101.wdf.sap.corp)
    SapIdeWebDynproCheckLayer 7.0017.20080801093115.0000 (release=645_VAL_REL, buildtime=2008-09-17:13:07:06[UTC], changelist=495367, host=PWDFM101.wdf.sap.corp)
    SapMetamodelCommon 7.0017.20061002105432.0000 (release=645_VAL_REL, buildtime=2008-09-17:12:49:40[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
    SapMetamodelCore 7.0017.20061002105432.0000 (release=645_VAL_REL, buildtime=2008-09-17:12:49:34[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
    SapMetamodelDictionary 7.0017.20060719095619.0000 (release=645_VAL_REL, buildtime=2008-09-17:12:58:48[UTC], changelist=411251, host=PWDFM101.wdf.sap.corp)
    SapMetamodelWebDynpro 7.0017.20080801093120.0000 (release=645_VAL_REL, buildtime=2008-09-17:13:03:59[UTC], changelist=495368, host=PWDFM101.wdf.sap.corp)
    SapWebDynproGenerationCTemplates 7.0017.20080829103545.0000 (release=645_VAL_REL, buildtime=2008-09-17:13:16:41[UTC], changelist=499141, host=pwdfm101)
    SapWebDynproGenerationCore 7.0017.20080801093115.0000 (release=645_VAL_REL, buildtime=2008-09-17:13:07:12[UTC], changelist=495367, host=PWDFM101.wdf.sap.corp)
    SapWebDynproGenerationTemplates 7.0017.20080829103545.0000 (release=645_VAL_REL, buildtime=2008-09-17:13:16:41[UTC], changelist=499141, host=pwdfm101)
    sap.com/tcwdcorecomp
    No information available null
    Detailed Error Information
    Detailed Exception Chain
    com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: Error in module RSQL of the database interface., error key: RFC_ERROR_SYSTEM_FAILURE
         at java.lang.Throwable.<init>(Throwable.java:179)
         at java.lang.Exception.<init>(Exception.java:29)
         at com.sap.exception.BaseException.<init>(BaseException.java:145)
         at com.sap.tc.cmi.exception.CMIException.<init>(CMIException.java:65)
         at com.sap.tc.webdynpro.progmodel.model.api.WDModelException.<init>(WDModelException.java:68)
         at com.sap.tc.webdynpro.modelimpl.rfcadapter.WDRFCException.<init>(WDRFCException.java:54)
         at com.sap.tc.webdynpro.modelimpl.rfcadapter.WDExecuteRFCException.<init>(WDExecuteRFCException.java:57)
         at com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException.<init>(WDDynamicRFCExecuteException.java:71)
         at com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException.<init>(WDDynamicRFCExecuteException.java:43)
         at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:101)
         at com.sap.ess.in.claims.fc.FcPowerClaims.callRFC_Emp_Action(FcPowerClaims.java:392)
         at com.sap.ess.in.claims.fc.FcPowerClaims.performEmpAction(FcPowerClaims.java:1988)
         at com.sap.ess.in.claims.fc.wdp.InternalFcPowerClaims.performEmpAction(InternalFcPowerClaims.java:8022)
         at com.sap.ess.in.claims.fc.FcPowerClaimsInterface.performEmpOperation(FcPowerClaimsInterface.java:398)
         at com.sap.ess.in.claims.fc.wdp.InternalFcPowerClaimsInterface.performEmpOperation(InternalFcPowerClaimsInterface.java:3440)
         at com.sap.ess.in.claims.fc.wdp.InternalFcPowerClaimsInterface$External.performEmpOperation(InternalFcPowerClaimsInterface.java:3616)
         at com.sap.ess.in.claims.vc.powerrequestdetail.VcPowerRequestDetail.aH_Send(VcPowerRequestDetail.java:739)
         at com.sap.ess.in.claims.vc.powerrequestdetail.wdp.InternalVcPowerRequestDetail.aH_Send(InternalVcPowerRequestDetail.java:2947)
         at com.sap.ess.in.claims.vc.powerrequestdetail.VcPowerRequestDetailView.onActionSend(VcPowerRequestDetailView.java:1423)
         at com.sap.ess.in.claims.vc.powerrequestdetail.wdp.InternalVcPowerRequestDetailView.wdInvokeEventHandler(InternalVcPowerRequestDetailView.java:1650)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
         at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
         at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
         at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:733)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:668)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
         at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:860)
         at com.sap.tc.webdynpro.portal.pb.impl.localwd.LocalApplicationProxy.sendDataAndProcessAction(LocalApplicationProxy.java:77)
         at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1299)
         at com.sap.portal.pb.PageBuilder.SendDataAndProcessAction(PageBuilder.java:326)
         at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:868)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
         at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
         at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:101)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    Caused by: com.sap.aii.proxy.framework.core.BaseProxyException: Error in module RSQL of the database interface., error key: RFC_ERROR_SYSTEM_FAILURE
         at java.lang.Throwable.<init>(Throwable.java:179)
         at java.lang.Exception.<init>(Exception.java:29)
         at com.sap.aii.util.misc.api.BaseException.<init>(BaseException.java:96)
         at com.sap.aii.proxy.framework.core.FaultException.<init>(FaultException.java:34)
         at com.sap.aii.proxy.framework.core.SystemFaultException.<init>(SystemFaultException.java:29)
         at com.sap.aii.proxy.framework.core.BaseProxyException.<init>(BaseProxyException.java:39)
         at com.sap.aii.proxy.framework.core.AbstractProxy.send$(AbstractProxy.java:150)
         at com.sap.ess.in.claims.newmodel.HRXSS_IN_NEWCLMS_MODEL.hrxss_In_Cl_Emp_Action(HRXSS_IN_NEWCLMS_MODEL.java:475)
         at com.sap.ess.in.claims.newmodel.Hrxss_In_Cl_Emp_Action_Input.doExecute(Hrxss_In_Cl_Emp_Action_Input.java:137)
         at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:92)
         ... 54 more
    Appreciate any quicker help on this.
    Regards,
    Rajasekar

    Hi,
    Can u give me full details ....
    What is the name of the BADI and ....coding tht you have written in method.
    Cheers
    Vivek

  • Firefox prompted me to download an incompatible update that its website claims is compatible with my operating system (Mac OS 10.4.11). Why prompt an incompatible download AND claim it is compatible?

    I have an iMac and use OS 10.4.11 & Firefox 3.6.19. Firefox prompted me to download an update (to 7.0.1). I looked up the system requirements on your website, and it stated the update is compatible with OS 10.4.11. But after I downloaded and installed the update, it failed to work on grounds of incompatibility. Hence 2 questions: (1) Why did Firefox prompt me to download an incompatible update? (2) Why did your website claim the update is compatible with my operating system when it is not?

    Sorry, it's because Firefox 4+ are only compiled for the Intel processors.
    There is a separate project for PPC Macs called Ten Four Fox. You might give it a spin when you're tired of 3.6.
    http://www.floodgap.com/software/tenfourfox/

  • Can not get access files from Windows 7 to Claims-based file authorization share

    We have AD level 2012R2, DCs running 2012R2 of course, and we have clustered File Server (3 FSNodes running 2012R2).
    We enabled 2 policies 
    KDC Support for claim
    Kerberos support for claim
    We created 1 claim type in ADAC (For example "Division" Source Property). Filled this property to all IT AD Accounts by our value "IT"
    On FS made a share folder ITDivision:
    - set permissions  Domain Users can Modify if User.Division equals "IT"
    so on Windows 8 IT Users can access files on this share and on Windows 7 they cant
    =\ . We know from many presentations about Dynamic Access Control that File Server must enroll user claims if client do not support this claims (Service-for-User-To-Self)

    Hi,
    >>so on Windows 8 IT Users can access files on this share and on Windows 7 they cant
    =\ . We know from many presentations about Dynamic Access Control that File Server must enroll user claims if client do not support this claims (Service-for-User-To-Self)
    How is it going? Was there any error message? As far as I know, Dynamic Access Control (DAC) should work for downlevel clients. It’s backwards compatible. As Florain explains in the following blog:
    For non-Windows 8 and non-Windows Server 2012 boxes accessing DAC-protected file shares, the users do not carry any claims. For them, the Server 2012-based file share will query Active Directory and proxy the claims request to figure out what claims
    the user and machine bring. The file server checks in the name of the user, whether they should have claims. With that information, the file server evaluates the access to the file share. So yeah – DAC works for downlevel clients, too. It’s backwards compatible.
    And totally transparent to Windows 7.
    Questions regarding Dynamic Access Control (FAQ)
    http://www.frickelsoft.net/blog/?p=293
    In addition, regarding dynamic access control, the following blog can also be referred to for more information.
    Dynamic Access Control in Windows Server 2012
    http://www.infoq.com/news/2012/10/Dynamic-Access-Control
    Please Note: Since the above two website are not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    Best regards,
    Frank Shen

  • How to pass credentials/saml token access sharepoint web service ex:lists.asmx when sharepoint has single sign on with claims based authentication

    How to pass credentials/saml token exchange to the sharepoint web service ex:lists.asmx when sharepoint has single sign on with claims based authentication 
    Identity provider here is Oracle identity provider 
    harika kakkireni

    Hi,
    The following materials for your reference:
    Consuming List.asmx on a claims based sharepoint site
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/f965c1ee-4017-4066-ad0f-a4f56cd0e8da/consuming-listasmx-on-a-claims-based-sharepoint-site?forum=sharepointcustomizationprevious
    Sharepoint Claims based authentication and Single Sign on
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/2dfc1fdc-abc0-4fad-a414-302f52c1178b/sharepoint-claims-based-authentication-and-single-sign-on?forum=sharepointadminprevious
    Sharepoint Claim Based Authentication Web Service issuehttp://social.msdn.microsoft.com/Forums/office/en-US/dd4cc581-863c-439f-938f-948809dd18db/sharepoint-claim-based-authentication-web-service-issue?forum=sharepointgeneralprevious
    Best Regards
    Dennis Guo
    TechNet Community Support

  • My iPhone 5S was ignored to claim with Thai wireless carrier

    I really confident in Apple product a lot, when Apple releases the new products I feel that I would like to be the owner of them all.
    Apple is really famous in Thailand, iPhone is the top ranking of product that Thai people would like to be owned. I'm the one of these all people.
    I buy iPhone 5S after it sold by Truemove-H. With confidentially in Apple product and the first Thai authorized carrier by Apple, I booked and brought it immediately.
    My first unboxing of the new iPhone 5S was in Central Chiang Rai (iBeat). I have booked two iPhones. I unboxed the first iPhone (32GB) and found 2 dead pixels on screen, unfortunately the second iPhone (16GB) also have a dead pixel. Luckily, they returned me a money. This unboxing disappointed me a little bit in them of Apple product quality.
    I got a call from another shop, they said that my iPhone 5s that I had booked is available. I came to the shop and unbox it, I carefully checked the dead pixels and others majority thing, nothing dysfunctional.
    I decided to buy and came-back to my home until I later found that the screen is loose and I can hear the sound (the clicking sound) when I press on the top right corner of the screen.
    I was worried a lot and contact to the Apple via chatting, the staff suggested me that I should to contact to the wireless carrier (Truemove H). I was not complacent to contact to Truemove Shop in Central Airport Ching Mai. I waited to talk with them around 1 hours. When was in my queue, I talked to them that How can I use my new iPhone with a loose screen? I really worried about this a lot because I should be the way it is. Truemove- H staff answer me that this kind of issue cannot be claim and return as a new phone or refurbished phone. It is still working, there is no problem with software, we could not claim this iPhone for you.
    I felt disappoint again when I have heard the staff said to me like this. I felt that the Apple standard unable to use in Apple product. I think if I buy this iPhone with Apple directly it would not be a problem like this.
    I would like to ask to Apple that how can I do next? I don't mind that I would get a refurbished one or not. I just worry about the standard that Apple have in each country, it quite strongly different. for the example; I can claim this in US or UK but I can't do anything in Thailand.
    How can I recall my feeling and confidentiality from Apple?
    *sorry about grammar and language used, I'm not a native speaker.
    The video shows how my iPhone 5S has a loose screen: https://www.youtube.com/watch?v=bLwUWbfznZg&feature=youtu.be

    What is your technical support question for your fellow users in these user to user support forums?
    If English is not your native language, stop posting in English.  Post in your native language to clearly communicate the issue.
    And while you are at it, STOP rambling.  Get to the point.  We do not need nor care for your praise of Apple and the irrelevant back story.

  • IPod Classic not recognized by iTunes, claims to be wiped of all content, and causes computer problems when connected

    I have an 80 GB iPod Classic that has suddenly developed severe problems. I'm running iTunes on Windows 7 64 bit.
    It was working fine until last night, when I connected it to iTunes to add 6 songs. (Four of these were bought on Amazon.com and 2 ripped from CD's). It accepted the songs and played them fine when connected. When I clicked the icon in iTunes to eject the iPod, it came up with the "OK to Disconnect" and progress bar as usual. However, this time the progress bar didn't start to fill in. It just sat there.
    After several minutes the progress bar finally filled in and returned to the menu... but instead of displaying the cover flow on the right side as usual, it showed a gray box with "No Music."
    When I tried to re-connect it to my computer, iTunes would not recognize it. My computer also wouldn't recognize it at first... after several minutes, it came up as a generic removable device. Attempting to right-click on it or eject it from Windows was unsuccessful.
    The iPod itself displayed "Connected" and alternated the plug image with the spinning arrows. It never said "Synchronizing" as it usually does.
    Furthermore, my computer's performance degraded severely while the iPod was plugged in. iTunes itself froze, and even my other applications (such as my web browser) would not work correctly. This all cleared up as soon as I unplugged the iPod. If I tried to initialize iTunes while the iPod was plugged in, it would not open. It opened immediately when I unplugged the iPod.
    Finally, despite claiming to have no music or other contents (it had contained only my iTunes music library, which is about 26.5 GB), in Settings the iPod claimed to have only 5.3 GB of free space.
    Resetting the iPod with Select/Menu made no change. I was able to put it in diagnostic mode and check the hard drive, which gave these results:
    Retracts: 381
    Reallocs: 0
    Pending Sectors: 10
    PowerOn Hours: 417
    Smart/Stops: 381
    Temp: Current 24c
    Temp: Min 15c
    Temp: Max 48c
    When I put the iPod up to my ear I hear a steady, faint high-pitched sound and an occasional very faint crackling noise. When it shuts down the sound continues for a few seconds, then ends with a kind of squeaking sound.
    The iPod is more than 5 years old, so I'm prepared for the probability that it's fried. But I'd like to try everything before I go ahead and spring for a new one.

    The iPod's hard drive probably has data corruption.  That does not necessarily mean there is a hardware problem.  Hard drives, including the ones in computers, can develop data corruption.
    Try putting the iPod into Disk Mode
    http://support.apple.com/kb/ht1363
    If it goes into Disk Mode, run iTunes on the computer and connect the iPod.  To eliminate other potential issues, you should disconnect other USB devices (you can leave standard keyboard/mouse connected), and connect the iPod to a direct USB port on the computer.
    iTunes may prompt you to do a Restore, which you should do.  This will erase the iPod, re-install its software, and set it to default settings.  If the problem was only data corruption, and there is no hardware problems, the iPod should have a "fresh start."  You can sync it from your iTunes library.
    If the iPod does not go into Disk Mode, or if doing a Restore fails, the iPod's hard drive may be faulty.

  • I go to "clip adjustments" and change the length of a photo. It reverts back to original length. I also shorten it by moving the yellow "box" around a specific clip. It still reverts back to original length. Why?

    I go to "clip adjustments" and change the length of a clip. It reverts back to original length. I've also tried to shorten it by moving the yellow "box" around a specific clip to shorten. It still reverts back to original length. Why?

    Welcome to iMovie Discussions.
    See my 2nd reply to 'getzcreative', here.

  • Cant find HP Web services tab to find claim code

    Hi
    I am trying to set up HP ePrint on my HP Laserjet M1522nf printer connected to my home network. I am unable to find the claim code for my printer to set up the device on HP connected services.
    I have entered the IP address on my web browser and entered the printer's configuration tab but i am unable to find the web services tab or the print info page for the claim code.
    Please let me know how to find the claim code so that i could set up ePrint.
    Thanks
    Harish
    This question was solved.
    View Solution.

    Ok judt realised this device is not eprint ready.
    Please ignore my earlier post. 

  • Payroll issue regarding the Claims - /561 and /563

    Hi Payroll Experts,
    I have a payroll issue regarding the Claims - /561 and /563 (October PY Run)
    When i m runnning the Current month Payroll(October PY Run), Total Earning - total deductions are not matching with Net Pay. later i came to know that the system creates the WT /561 and deducts from the Net Pay.
    But as per the Employee Payment Details , there is no recovery required from the employee for the past one year. But even then the system creates the WT /561. and deducts the same from NET Pay.
    The followng are the WT details
    IN - Period
    OCT 2011
         /101 Total gross amount     118,897.00
         /110 Net payments/deductions     76,070.00-
         /550 Statutory net pay     95343
         /551 Stat.net recalc.diff.     37,692.00-
         /552 Stat.net subs.adjustment      37,692.00-
         /559 Bank transfer                                                   34,317.00
         /560 Net pay     37,218.00
         /563 Claim from previous month     5,609.00
    FOR Period
    Sept- Oct
         /101 Total gross amount     49,213.00
         /110 Net payments/deductions      31,721.00-
         /550 Statutory net pay     41,529.00
         /551 Stat.net recalc.diff.     14,591.00
         /552 Stat.net subs.adjustment     23,101.00-
         /553 Recalc.diff.to last payr.     37,692.00
         /559 Bank transfer                                                   14,591.00
         /560 Net pay     14,591.00
         /561 Claim     5,609.00
    I request  some body to  throw siome light on the same.

    Hi Experts,
    Thanks for everyone for replying to my query ,
    I have a doubt that If you check the WTs /551 and /552  in the IN PRD, the negative sign is coming for both the WTs
    Is it correct?
    And also, Assume that there may be a master data changes like Bank details and other deduction Wts happened in the month of Aug and now i m going to run the payroll for the month of Nov,
    some of the employees having differences in the Net Pay, Eventhough the employee is having sufficient balances.
    So how do i handle this issue
    IS ther any way to solve this differences?
    Please Let me know how to solve this issue.
    Thanks

  • ADFS Claims Authentication, Configuring UPA and People Picker

    Hi,
    I am just trying to get my head around setting up ADFS to authenticate users along with allowing UPA (My Sites) and People Picker to work.
    So, my environment is a WFE and an SQL Server offsite and my AD and ADFS 2.0 server onsite.  We have configured SharePoint as below and applied the Claims Provider to my Intranet web app and My Sites web app and I can login in with my
    account as [email protected] (UPN)
    $cert = New-Object System.Security.Cryptography.X509Certificates.X509Certificate2("E:\ADFS_SelfSigned.cer")
    New-SPTrustedRootAuthority -Name "ADFS Self Signed” -Certificate $cert
    $map1 = New-SPClaimTypeMapping "http://schemas.xmlsoap.org/ws/2005/05/identity/claims/upn" -IncomingClaimTypeDisplayName "Account ID" –SameAsIncoming
    $map2 = New-SPClaimTypeMapping -IncomingClaimType "http://schemas.xmlsoap.org/ws/2005/05/identity/claims/emailaddress" -IncomingClaimTypeDisplayName "EmailAddress" –SameAsIncoming
    $map3 = New-SPClaimTypeMapping -IncomingClaimType "http://schemas.microsoft.com/ws/2008/06/identity/claims/role" -IncomingClaimTypeDisplayName "Role" –SameAsIncoming
    $realm = “https://intranet.domain.com.au/_trust/”
    $signinurl = “https://adfs01.domain.com.au/adfs/ls/”
    $ap = New-SPTrustedIdentityTokenIssuer –Name "SAML Provider" -Description "My Custom Identity Provider" –Realm $realm -ImportTrustCertificate $cert -ClaimsMappings $map1,$map2,$map3 –SignInUrl $signinurl -IdentifierClaim $map1.InputClaimType
    $uri = new-object System.Uri("https://adfs01.domain.com.au/adfs/ls/")
    $ap.ProviderRealms.Add($uri, " https://mysites.domain.com.au/_trust/")
    $ap.Update()
    iisreset
    When trying to configure a new synchronisation connection> Activery Directory Import under the User Profile Service Application, I get an error saying it can't connect to the Domain Controller which would make sense as they are not on the
    same domain.
    I believe that MS have a sync utility that works with Office365/MS Cloud - is there a similar solution available for my configuration? 

    AD import still uses LDAP/ADSI... ADFS cannot be used DIRECTLY as a sync source, since it is NOT a QUERYABLE technology. It is an AUTHENTICATION technology. UPS syncs to a QUERYABLE data source like LDAP/ADSI, and maps one of the properties to the ADFS login
    (most people choose email or UPN, though I tend to recommend SID for various reasons).
    Also, since people picker displays a SEARCH window, and since ADFS is not a QUERYABLE technology, the people picker (by default) ASSUMES that whatever you type in will be VALID. You can SEARCH the UPS, but if you type an email address or something of that
    nature, it is NOT going to SEARCH your directory! To address this, you need to install a custom Identity Provider... one is available on CodePlex, which performs an LDAP search against the domain controller... if that's not an option, you need a custom coded
    solution.
    Scott Brickey
    MCTS, MCPD, MCITP
    www.sbrickey.com
    Strategic Data Systems - for all your SharePoint needs

  • Moving/Linking Claims Windows Auth user to an ADFS Claims

    Hi guys, 
    Here is my situation:
    Initial deployment: SharePoint 2010 with Windows Authentication - Users login using AD
    We successfully migrated the web application to use "Claims"
    We then integrated the web application with ADFS 2.0 - Using the same AD users
    Everything seems good and working fine. 
    The question I have is related to content already created in SharePoint. Is it possible to map the new ADFS account usernames to the existing windows authentication claims usernames?
    This is important for users, because we would like the "My" views of lists and libraries to work. SharePoint at the moment thinks that the logged in users (using ADFS) is different than the user who created/modified the documents. (Although it
    is the same AD account)

    Hi Inderjeet
    Thanks for your reply. The article did help in moving users (Move-SPUser) from AD to ADFS (Which I noticed in the securities in groups), however, the issue I'm looking for is still standing where the items that were created by the user using "Windows
    Auth Claim" were not moved/updated to the "ADFS Claim" user, which in fact they map to the same AD user.
    Is there away to transfer/update the created by and modified by attributes of users from Windows Claims to ADFS Claims user?
    UPDATE: The above statement is not correct. Move-SPUser actually updates the created by and modified by attributes to. 

  • Cannot create dataset from claims based authentication sharepoint site in report builder 3.0

    I have a sharepoint site, which is configured as claims based authentication (ref:
    http://ashrafhossain.wordpress.com/2011/05/25/how-to-configure-claim-based-authentication-for-sharepoint-project-server-2010/) . both AD and asp.net members can log in to the site successfully. My user need to use the report build to create report
    on this sharepoint site. As a result, the site is also integrated with reporting service. I try to create a report in the sharepoint site by clicking "New Document" -> "Report builder Report". The report builder will comes out and ask for credential to
    connect to the report server. I use asp.net member to login and it can let me to create a data source which connect to a the list of the sharepoint site with credential option "Use current Windows user. Kerberos delegation might be required". However, when
    I try to create a data set and click the query designer, error "Server was unable to process request. ---> Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))" appear as below:
    Besides, non of my AD account can be used to login to the report builder. Errors below found in the ULS log:
    09/26/2012 14:47:27.75 w3wp.exe (0x116C)
    0x11F4 SharePoint Foundation
    Claims Authentication fo1t
    Monitorable SPSecurityTokenService.Issue() failed: System.ServiceModel.FaultException`1[Microsoft.IdentityModel.Tokens.FailedAuthenticationException]: The security token username and password could not be validated.
    (Fault Detail is equal to Microsoft.IdentityModel.Tokens.FailedAuthenticationException: The security token username and password could not be validated.).
    09/26/2012 14:47:27.76 w3wp.exe (0x140C)
    0x0F38 SharePoint Foundation
    Claims Authentication fsq7
    High Request for security token failed with exception: System.ServiceModel.FaultException: The security token username and password could not be validated.     at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.ReadResponse(Message
    response)     at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken rst, RequestSecurityTokenResponse& rstr)     at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken
    rst)     at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForContext(Uri context, Boolean bearerToken, SecurityToken onBehalfOf, SecurityToken actAs, SecurityToken delegateTo)
    524a2f96-f5ff-4c96-80d1-f08d3c7ef14f
    09/26/2012 14:47:27.76 w3wp.exe (0x140C)
    0x0F38 SharePoint Foundation
    Claims Authentication 8306
    Critical An exception occurred when trying to issue security token: The security token username and password could not be validated..
    524a2f96-f5ff-4c96-80d1-f08d3c7ef14f

    Hi Foxvito,
    Claims authentication types supported by SharePoint 2010 are Windows Claims, forms-based authentication Claims, and SAML Claims. In SAML-Claims mode, SharePoint Server accepts SAML tokens from a trusted external Security Token Provider (TST). From the
    blog you referenced, it seems to use the SAML Claims authentication.
    However, the Reporting Services client applications: Report Builder, the Report Designer in Business Intelligence Development Studio, and Management Studio do not support connecting and authenticating with LiveID or SAML Claims based SharePoint Web applications.
    That's because the SAML Claims don't use the Reporting Services authentication endpoint. So, you have to change the Claims authentication type to use Report Builder on the SharePoint site.
    References:
    Overview of Kerberos authentication for Microsoft SharePoint 2010 Products
    Claims Authentication and Reporting Services
    Regards,
    Mike Yin
    Mike Yin
    TechNet Community Support

Maybe you are looking for