Claims Authentication error using LDAP SharePoint 2013
I am getting following error while trying to log in portal using account
"An exception occurred when trying to issue security token: The server was unable to process the request due to an internal error. For more information about the error, either
turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET
Framework SDK documentation and inspect the server trace logs.."
what i m doing here is,
i configured 3 web configure files but getting error.
i am following this Microsoft blog and i m confused about what should be names for
userContainer="OU=UserAccounts,DC=internal,DC=yourcompany,DC=distinguishedName (of your userContainer)" and groupContainer="DC=internal,DC=yourcompany,DC=distinguishedName (of your groupContainer)"https://technet.microsoft.com/en-us/library/ee806890.aspx?f=255&MSPPError=-2147217396#proc1can someone guide me proper so i can fix it?THanks,Deepak Patel
Hi Deepak,
The OU needs to be set with the name of the Organization Unit where the users exists in the directory service used for the forms-based authentication, and DC needs to be set with the domain components of the domain where the directory service exists.
For example, if Activate Directory is used as the directory service, and users are stored in an OU called users, and the domain is “SharePoint.com”.
Then the userContainer should be set like this: userContainer="OU=users,DC=SharePoint,DC=com”.
And the groupContainer should be set like this: groupContainer="DC=SharePoint,DC=com".
Please make sure that the userContainer and groupContainer are right when configuring the forms-based authentication.
If above cannot work, I recommend to get the actual error by adding the service debug in the web.config for the web service, located at C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\WebServices\SecurityToken:
<serviceDebug includeExceptionDetailInFaults="True" httpHelpPageEnabled="True"/>.
Please refer to the link below for detailed steps(similar for SharePoint 2013):
http://underthehood.ironworks.com/2011/05/sharepoint-2010-an-exception-occurred-when-trying-to-issue-security-token-the-server-was-unable-to-p-1.html
Thanks,
Victoria
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]
Similar Messages
-
Claims Authentication Error connecting to BCS - but we're using Windows Authentication
We currently have an External List with a SQL Server SProc as a source in a SharePoint 2010 site. It has been working great for months now. I need to make a change to the External Content Type - and I have made changes in the past - but now strange things
are happening.
I can't view the external content type (or any) in SPD. I can create a new Secure Store Service Target Application in SPCentralAdmin and everything seems fine, but I can't consume the application in SPD. I get an error that BCS has rejected the
request. This is new and curious; I'm a Farm Administrator.
Looking at the logs, I find I get a Claims Authentication error that my ID can't be found (the error is below). This is also new and is very, very curious as we're not using Claims authentication for any of our sites. They all use Windows authentication.
I am also getting recent reports from users who are repeatedly challenged for credentials and wonder if this is related.
In my research, I've found suggestions from starting the CWTS Service (I was dubious, I can start the service, and it doesn't resolve the problem) to setting Metadata Store Permissions in SPCentralAdmin (I was again dubious as I'm a farm administrator -
and I get the same error when I try to make this assignment!) So I'm at a loss.
Here is the error (the X'd out information was correct in the trace):
SPSecurityContext.WindowsIdentity: Could not retrieve a valid windows identity for NTName='XXXXX\XXXXXX', UPN='[email protected]'. UPN is required when Kerberos constrained delegation is used. Exception: System.ServiceModel.EndpointNotFoundException:
There was no endpoint listening at net.pipe://localhost/s4u/022694f3-9fbd-422b-b4b2-312e25dae2a2 that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more details. ---> System.IO.PipeException:
The pipe endpoint 'net.pipe://localhost/s4u/022694f3-9fbd-422b-b4b2-312e25dae2a2' could not be found on your local machine. --- End of inner exception stack trace --- Server stack trace:
at System.ServiceModel.Channels.PipeConnectionInitiator.GetPipeNam...
We're not using Kerberos at all. We're using good, old-fashioned Windows Authentication. The only changes made to the platform recently have been updates. The error could, of course, be erroneous and I may be charging down the wrong path.
But although I find many links when I Bing the error, all the links pertain to sites using Claims authentication - even the Error Category in my log is "Claims Authentication" - but we're not using Claims Authentication...
Again, any help at all will be appreciated. Thanks!Hi Kevin,
From the error message, we might be missing user permissions to the BCS Metadata Store. Please perform the steps below and test the issue again:
1. Open the SharePoint Central Administration website with either a Farm administrator account or an account that has been delegated permissions to administer the Business Data Connectivity Service Applications.
2. On the Quick Launch, click Application Management.
3. On the Application Management page, under Service Applications, click Manage service applications.
4. In the list of services, select the row of the Business Data Connectivity Service Application that you created in Create the Business Data Connectivity service application and then click Manage and then Set Metadata Store Permissions.
5. Enter the Farm Administrator account and any other delegate administrators if you have them and then click Add.
6. For each account or group that you added that is an administrator of the Business Data Connectivity Service Application, select the Edit, Execute, Selectable In Clients, and Set Permissions checkboxes.
7. Select the Propagate permissions to all BDC Models, External Systems and External Content Types in the BDC Metadata Store. Doing so will overwrite existing permissions checkbox.
8. Click OK.
Also, make sure your account is added as local administrator.
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
Page not found error while opening sharepoint 2013 site
page not found error while opening sharepoint 2013 site
Please help me on thisHi,
Please check the log file to find more information about this issue. The path of the log file is:
C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\LOGS.
In addition, please make sure the URL of the site is correct.
Please check whether you could access other pages in the problematic site.
Best Regards,
Wendy
Wendy Li
TechNet Community Support -
We have a SharePoint Enterprise 2013 system at RTM level. We've installed Workflow Manager 1.0 by following the steps at
http://technet.microsoft.com/en-us/library/jj658588.aspx. For the final step of Validating the Installation we created a simple list-level workflow and verified that the workflow
is invoked successfully. This is working successfully, but only for a single user. If other users in the same site collection try to invoke the workflow on this same list we get the ULS Log Error:
Claims Authentication af3zp Unexpected STS Call Claims Saml: Problem getting output claims identity. Exception: 'Microsoft.SharePoint.SPException: The specified user or domain group was not found. --->
System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated.
followed by:
Failed to issue new security token. Exception: Microsoft.SharePoint.SPException: The specified user or domain group was not found. ---> System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated.
(as details below).
All accounts that are attempting to use the Test Workflow (both working and non-working user accounts) are valid AD accounts and are included in the User Profile Sync that runs nightly. All have Contribute or Design permission level (and for testing,
Full Control).
What could cause the Claims Authentication to fail when certain users attempt to launch the workflow?
Thank you for your response.
Jim Mac.
08/29/2013 10:22:51.94 w3wp.exe (0x2020) 0x26D8 SharePoint Foundation
Claims Authentication af3zp Unexpected STS Call Claims Saml: Problem getting output claims identity. Exception: 'Microsoft.SharePoint.SPException: The specified user or domain group was
not found. ---> System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated. at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType,
Boolean forceSuccess) at System.Security.Principal.NTAccount.Translate(Type targetType) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKeyClaim(IClaimsIdentity claimsIdentity,
SPClaim loginClaim) --- End of inner exception stack trace --- at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKeyClaim(IClaimsIdentity claimsIdent... 94aa5c2d-fa45-9b83-b203-a92b20102583
08/29/2013 10:22:51.94* w3wp.exe (0x2020) 0x26D8 SharePoint Foundation
Claims Authentication af3zp Unexpected ...ity, SPClaim loginClaim) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(String
encodedIdentityClaimSuffix) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.CreateTokenCacheReferenceFromTokenSignature(SPRequestInfo requestInfo, IClaimsIdentity identity) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.AugmentTokenCacheReferenceClaim(SPRequestInfo
requestInfo, IClaimsIdentity identity) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.AugmentOutputIdentityForRequest(SPRequestInfo requestInfo, IClaimsIdentity outputIdentity) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.GetOutputClaimsIdentity(IClaimsPrincipal
principal, RequestSecurityToken request, Scope scope)'. 94aa5c2d-fa45-9b83-b203-a92b20102583
08/29/2013 10:22:51.94 w3wp.exe (0x2020) 0x26D8 SharePoint Foundation
Claims Authentication fo1t Monitorable STS Call: Failed to issue new security token. Exception: Microsoft.SharePoint.SPException: The specified user or domain group was not found. --->
System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated. at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess)
at System.Security.Principal.NTAccount.Translate(Type targetType) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKeyClaim(IClaimsIdentity claimsIdentity, SPClaim loginClaim)
--- End of inner exception stack trace --- at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKeyClaim(IClaimsIdentity claimsIdentity, SPClaim logi... 94aa5c2d-fa45-9b83-b203-a92b20102583
08/29/2013 10:22:51.94* w3wp.exe (0x2020) 0x26D8 SharePoint Foundation
Claims Authentication fo1t Monitorable ...nClaim) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(String encodedIdentityClaimSuffix)
at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.CreateTokenCacheReferenceFromTokenSignature(SPRequestInfo requestInfo, IClaimsIdentity identity) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.AugmentTokenCacheReferenceClaim(SPRequestInfo
requestInfo, IClaimsIdentity identity) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.AugmentOutputIdentityForRequest(SPRequestInfo requestInfo, IClaimsIdentity outputIdentity) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.GetOutputClaimsIdentity(IClaimsPrincipal
principal, RequestSecurityToken request, Scope scope) at Microsoft.IdentityModel.Securi... 94aa5c2d-fa45-9b83-b203-a92b20102583
08/29/2013 10:22:51.94* w3wp.exe (0x2020) 0x26D8 SharePoint Foundation
Claims Authentication fo1t Monitorable ...tyTokenService.SecurityTokenService.Issue(IClaimsPrincipal principal, RequestSecurityToken request) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.Issue(IClaimsPrincipal
principal, RequestSecurityToken request) 94aa5c2d-fa45-9b83-b203-a92b20102583Hi Aries,
I am facing issue with work flow where Workflow goes to Suspend mode.
I am facing an issue with SP2013 Custom Workflow developed using Visual Studio 2012.
Objective of the Custom workflow: User fills the form and submit, list get updated and workflow will initiate and go for the process.
Issue: After the deployment of WF, for first time when user is filling the form and submit, list is getting updated. But the Workflow Goes to "Suspend" mode. (
This Custom Workflow has a configuration file where we are providing other details including ID of Impersonator (farm is running under Claim Based Authentication).
Work flow works fine once when the Impersonator initiate the workflow (Fill the form and submit for approval) and everything works fine after that.
Following steps are already performed
1.Make sure User profile synchronization is started.
2.Make sure the user is not the SharePoint system user.
3.Make sure the user by whom you are logged is available in User Profile list.
4.Step full synchronization of User Profile Application.
From the ULS logs it seems the user's security token from the STS service and User profile service is not being issued.
Appreciate any thoughts or solution.
Following are the log files.
<-------------------------------Information taken from "http://YYYY.XXXXX.com/sites/xxxx/_layouts/15/wrkstat.aspx" where it is showing workflow status as "Suspend"------->
http://yyyy.XXXX.com/sites/xxxx/_vti_bin/client.svc/sp.utilities.utility.ResolvePrincipalInCurrentcontext(input=@ParamUser,scopes='15',sources='15',inputIsEmailOnly='false',addToUserInfoList='False')?%40ParamUser='i%3A0%23.w%7CXXXXX%5Csps_biscomdev'
Correlation Id: f5bd8793-a53c-2127-bfb1-70bc172425e8 Instance Id: 14a985a0-60c8-42db-a42c-c752190b8106
RequestorId: f5bd8793-a53c-2127-0000-000000000000. Details: RequestorId: f5bd8793-a53c-2127-0000-000000000000. Details: An unhandled exception occurred during the execution of the workflow instance. Exception details: System.ApplicationException: HTTP 401
{"error_description":"The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug>
configuration behavior) on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs."} {"x-ms-diagnostics":["3001000;reason=\"There
has been an error authenticating the request.\";category=\"invalid_client\""],"SPRequestGuid":["f5bd8793-a53c-2127-8654-672758a68234"],"request-id":["f5bd8793-a53c-2127-8654-672758a68234"],"X-FRAME-OPTIONS":["SAMEORIGIN"],"SPRequestDuration":["34"],"SPIisLatency":["0"],"Server":["Microsoft-IIS\/7.5"],"WWW-Authenticate":["Bearer
realm=\"b14e1e0f-257f-42ec-a92d-377479e0ec8d\",client_id=\"00000003-0000-0ff1-ce00-000000000000\",trusted_issuers=\"00000005-0000-0000-c000-000000000000@*,[email protected]79e0ec8d\"","NTLM"],"X-Powered-By":["ASP.NET"],"MicrosoftSharePointTeamServices":["15.0.0.4420"],"X-Content-Type-Options":["nosniff"],"X-MS-InvokeApp":["1;
RequireReadOnly"],"Date":["Fri, 10 Apr 2015 19:48:07 GMT"]} at Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context) at System.Activities.CodeActivity.InternalExecute(ActivityInstance
instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)
ULS Log
04/16/2015 15:22:03.70 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation Authentication Authorization agb9s Medium OAuth request. IsAuthenticated=False, UserIdentityName=, ClaimsCount=0 f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.70 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation Runtime ajd6k Verbose Value for isAnonymousAllowed is : False f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.70 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation Runtime ajd6l Verbose Value for checkAuthenticationCookie is : True f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.70 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8b Verbose Looking up context site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.70 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8f Verbose Site lookup is replacing
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8g Verbose Looking up typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8b Verbose Looking up context site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8f Verbose Site lookup is replacing
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8g Verbose Looking up typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly)). Execution Time=18.7574119057031 f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8b Verbose Looking up context site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8f Verbose Site lookup is replacing
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8g Verbose Looking up typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.73 PowerShell.exe (0x29BC) 0x2B9C SharePoint Foundation General narq Verbose Releasing SPRequest with allocation Id {AF89E1D7-C47F-467B-8FD4-D7DC768820EE}
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8b Verbose Looking up context site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly.
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8f Verbose Site lookup is replacing
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
http://inetdev.
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8g Verbose Looking up typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80.
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80.
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Request (GET:http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly)). Parent No
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8b Verbose Looking up context site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly.
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8f Verbose Site lookup is replacing
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
http://inetdev.
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8g Verbose Looking up typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80.
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80.
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Logging Correlation Data xmnv Medium Name=Request (GET:http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly) f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.74 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Application Authentication Pipeline). Parent Request (GET:http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly) f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.74 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8b Verbose Looking up context site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.74 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.74 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8f Verbose Site lookup is replacing
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.74 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8g Verbose Looking up typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.74 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Claims Authentication ah25l Medium SPJsonWebSecurityBaseTokenHandler: ValidateActorIsSelfIssuer! Issuer '00000005-0000-0000-c000-000000000000' is not self
issuer. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Getting Site Subscription Id). Parent [S2S] Getting token from STS and setting Thread Identity f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8b Verbose Looking up context site
http://inetdev/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
http://inetdev/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8f Verbose Site lookup is replacing
http://inetdev/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8g Verbose Looking up typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Getting Site Subscription Id). Execution Time=0.341314329055788 f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Reading token from Cache using token signature). Parent [S2S] Getting token from STS and setting Thread
Identity f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.76 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General ajji6 High Unable to write SPDistributedCache call usage entry. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.76 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Reading token from Cache using token signature). Execution Time=7.5931438213516 f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.76 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Application Authentication ajwpx Medium SPApplicationAuthenticationModule: Failed to build cache key for user f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.76 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Topology aeayb Medium SecurityTokenServiceSendRequest: RemoteAddress: 'http://localhost:32843/SecurityTokenServiceApplication/securitytoken.svc' Channel:
'Microsoft.IdentityModel.Protocols.WSTrust.IWSTrustChannelContract' Action: 'http://docs.oasis-open.org/ws-sx/ws-trust/200512/RST/Issue' MessageId: 'urn:uuid:fd5eba94-c39d-4667-89bd-089411c87f09' f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.77 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation Topology aeax9 Medium SecurityTokenServiceReceiveRequest: LocalAddress: 'http://c1vspwfe01.vitas.com:32843/SecurityTokenServiceApplication/securitytoken.svc'
Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://docs.oasis-open.org/ws-sx/ws-trust/200512/RST/Issue' MessageId: 'urn:uuid:fd5eba94-c39d-4667-89bd-089411c87f09' f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.77 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation Monitoring nasq Medium Entering monitored scope (ExecuteSecurityTokenServiceOperationServer). Parent No f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation Claims Authentication ah25l Medium SPJsonWebSecurityBaseTokenHandler: ValidateActorIsSelfIssuer! Issuer '00000005-0000-0000-c000-000000000000' is not self
issuer. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation General narq Verbose Releasing SPRequest with allocation Id {F17590DF-49D9-439D-86BC-5AE6416BB765} f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation General 6t8b Verbose Looking up site
http://inetdev/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
http://inetdev/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation General 6t8f Verbose Site lookup is replacing
http://inetdev/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation General 6t8g Verbose Looking up typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation General narq Verbose Releasing SPRequest with allocation Id {3847D5A4-15C6-4AF9-B062-E22BB555DF4F} f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Portal Server User Profiles ae0s1 High Identity claims mapped to '0' user profiles. Claims: [nameid: '', nii: 'windows', upn: '', smtp: '', sip: ''], User Profiles: f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Portal Server User Profiles ae0sr Unexpected UserProfileException caught.. Exception Microsoft.Office.Server.Security.UserProfileNoUserFoundException: 3001002;reason=The
incoming identity is not mapped to any user profile account in SharePoint. Possible cause is that no user profiles are created in user profile database. Contact your administrator. at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.GetSingleUserProfileFromClaimsList(UserProfileManager
upManager, IEnumerable`1 identityClaims) at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.<>c__DisplayClass2.<GetMappedIdentityClaim>b__0() is thrown. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Portal Server User Profiles ae0su High The set of claims could not be mapped to a single user identity. Exception 3001002;reason=The incoming identity is not mapped
to any user profile account in SharePoint. Possible cause is that no user profiles are created in user profile database. Contact your administrator. has occured. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation Claims Authentication ae0tc High The registered mappered failed to resolve to one identity claim. Exception: Microsoft.Office.Server.Security.UserProfileNoUserFoundException:
3001002;reason=The incoming identity is not mapped to any user profile account in SharePoint. Possible cause is that no user profiles are created in user profile database. Contact your administrator. at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.GetSingleUserProfileFromClaimsList(UserProfileManager
upManager, IEnumerable`1 identityClaims) at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.<>c__DisplayClass2.<GetMappedIdentityClaim>b__0() at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass5.<RunWithElevatedPrivileges>b__3()
at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated
secureCode) at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.GetMappedIdentityClaim(Uri context, IEnumerable`1 identityClaims) at Microsoft.SharePoint.IdentityModel.SPIdentityClaimMapperOperations.GetClaimFromExternalMapper(Uri
contextUri, List`1 claims) f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation Claims Authentication af3zp Unexpected STS Call Claims Saml: Problem getting output claims identity. Exception: 'Microsoft.Office.Server.Security.UserProfileNoUserFoundException:
3001002;reason=The incoming identity is not mapped to any user profile account in SharePoint. Possible cause is that no user profiles are created in user profile database. Contact your administrator. at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.GetSingleUserProfileFromClaimsList(UserProfileManager
upManager, IEnumerable`1 identityClaims) at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.<>c__DisplayClass2.<GetMappedIdentityClaim>b__0() at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass5.<RunWithElevatedPrivileges>b__3()
at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated
secureCode) at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.GetMappedIdentityClaim(Uri context, IEnumerable`1 identityClaims) at Microsoft.SharePoint.IdentityModel.SPIdentityClaimMapperOperations.GetClaimFromExternalMapper(Uri
contextUri, List`1 claims) at Microsoft.SharePoint.IdentityModel.SPIdentityClaimMapperOperations.ResolveUserIdentityClaim(Uri contextUri, ClaimCollection inputClaims) at Microsoft.SharePoint.IdentityModel.SPIdentityClaimMapperOperations.GetIdentityClaim(Uri
contextUri, ClaimCollection inputClaims, SPCallingIdentityType callerType) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.GetLogonIdentityClaim(SPRequestInfo requestInfo, IClaimsIdentity inputIdentity, IClaimsIdentity
outputIdentity, SPCallingIdentityType callerType) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.EnsureSharePointClaims(SPRequestInfo requestInfo, IClaimsIdentity outputIdentity, SPCallingIdentityType callerType)
at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.AugmentOutputIdentityForRequest(SPRequestInfo requestInfo, IClaimsIdentity outputIdentity) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.GetOutputClaimsIdentity(IClaimsPrincipal
principal, RequestSecurityToken request, Scope scope)'. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation Claims Authentication fo1t Monitorable STS Call: Failed to issue new security token. Exception: Microsoft.Office.Server.Security.UserProfileNoUserFoundException:
3001002;reason=The incoming identity is not mapped to any user profile account in SharePoint. Possible cause is that no user profiles are created in user profile database. Contact your administrator. at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.GetSingleUserProfileFromClaimsList(UserProfileManager
upManager, IEnumerable`1 identityClaims) at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.<>c__DisplayClass2.<GetMappedIdentityClaim>b__0() at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass5.<RunWithElevatedPrivileges>b__3()
at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated
secureCode) at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.GetMappedIdentityClaim(Uri context, IEnumerable`1 identityClaims) at Microsoft.SharePoint.IdentityModel.SPIdentityClaimMapperOperations.GetClaimFromExternalMapper(Uri
contextUri, List`1 claims) at Microsoft.SharePoint.IdentityModel.SPIdentityClaimMapperOperations.ResolveUserIdentityClaim(Uri contextUri, ClaimCollection inputClaims) at Microsoft.SharePoint.IdentityModel.SPIdentityClaimMapperOperations.GetIdentityClaim(Uri
contextUri, ClaimCollection inputClaims, SPCallingIdentityType callerType) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.GetLogonIdentityClaim(SPRequestInfo requestInfo, IClaimsIdentity inputIdentity, IClaimsIdentity
outputIdentity, SPCallingIdentityType callerType) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.EnsureSharePointClaims(SPRequestInfo requestInfo, IClaimsIdentity outputIdentity, SPCallingIdentityType callerType)
at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.AugmentOutputIdentityForRequest(SPRequestInfo requestInfo, IClaimsIdentity outputIdentity) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.GetOutputClaimsIdentity(IClaimsPrincipal
principal, RequestSecurityToken request, Scope scope) at Microsoft.IdentityModel.SecurityTokenService.SecurityTokenService.Issue(IClaimsPrincipal principal, RequestSecurityToken request) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.Issue(IClaimsPrincipal
principal, RequestSecurityToken request) f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.79 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (ExecuteSecurityTokenServiceOperationServer). Execution Time=17.1551132895382 f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.79 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Claims Authentication fsq7 High SPSecurityContext: Request for security token failed with exception: System.ServiceModel.FaultException: The server was
unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in
order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs. at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.ReadResponse(Message
response) at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken rst, RequestSecurityTokenResponse& rstr) at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken
rst) at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForContext(Uri context, Boolean bearerToken, SecurityToken onBehalfOf, SecurityToken actAs, SecurityToken delegateTo, SPRequestSecurityTokenProperties properties) f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.79 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Claims Authentication 8306 Critical An exception occurred when trying to issue security token: The server was unable to process the request due to an internal
error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to
the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs.. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.79 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Application Authentication Pipeline). Execution Time=52.3525336320678 f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.79 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Application Authentication ajezs High SPApplicationAuthenticationModule: Error authenticating request, Error details { Header: {0}, Body: {1} }. Available
parameters: 3001000;reason="There has been an error authenticating the request.";category="invalid_client" {"error_description":"The server was unable to process the request due to an internal error. For more information
about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to the client, or turn on tracing as
per the Microsoft .NET Framework SDK documentation and inspect the server trace logs."} . f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.79 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 8nca Medium Application error when access /sites/testrpa2/_vti_bin/client.svc, Error=The server was unable to process the request due to an internal
error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to
the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs. at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.ReadResponse(Message response) at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken
rst, RequestSecurityTokenResponse& rstr) at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken rst) at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForContext(Uri context,
Boolean bearerToken, SecurityToken onBehalfOf, SecurityToken actAs, SecurityToken delegateTo, SPRequestSecurityTokenProperties properties) at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForApplicationAuthentication(Uri context,
SecurityToken onBehalfOf) at Microsoft.SharePoint.IdentityModel.SPApplicationAuthenticationModule.<>c__DisplayClass4.<GetLocallyIssuedToken>b__3() at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated
secureCode) at Microsoft.SharePoint.IdentityModel.SPApplicationAuthenticationModule.ConstructIClaimsPrincipalAndSetThreadIdentity(HttpApplication httpApplication, HttpContext httpContext, SPFederationAuthenticationModule fam)
at Microsoft.SharePoint.IdentityModel.SPApplicationAuthenticationModule.AuthenticateRequest(Object sender, EventArgs e) at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.79 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8b Verbose Looking up context site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.79 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8f Verbose Site lookup is replacing
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8g Verbose Looking up typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8b Verbose Looking up context site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8f Verbose Site lookup is replacing
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8g Verbose Looking up typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly)). Execution Time=62.2890618779761 f5bd8793-a53c-2127-8485-418c67f110f6
Regards
Sakti -
Javascript error after last sharepoint 2013 update : unable share single list element
After yesterday update of SharePoint 2013 using Windows update we receive a JavaScript error when we try to share a single list element. Our IE is Italian the error is "Properties or field not inizialized"
This is the user interface "hanged" and wait ....
The problem not exist if we share an entire list or website.
LSo Lorenzo Soncini Trento TN - ItalyHi Lorenzo,
Glad that you solved the issue and thanks for sharing, this will benefit others who have similar issue.
Regards,
Daniel Yang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
Dtd-is-prohibited-error-when-accessing-sharepoint-2013-office365-list-but-not
I need to update some items in a list and previously done it through a console app and using the sharepoint.client.dll but for some reason it no longer works.
When I call the clientContext.ExecuteQuery() it throws this error:-
"For security reasons DTD is prohibited in this XML document. To enable DTD processing set the DtdProcessing property on XmlReaderSettings to Parse and pass the settings into XmlReader.Create method."
I have googled this and seen others have had similar problems but changing DNS has not resolved this which did in their case.
I can probably create a sharepoint-hosted app to do it but just takes longer for such a simple update.
I have checked fiddler and can see it is requesting the FPUrl.xml and returning a 302 response.
GET http://msoid.thesportsoffice.com/FPUrl.xml HTTP/1.1
Host: msoid.thesportsoffice.com
HTTP/1.1 302 Found
Cache-Control: private
Content-Type: text/html; charset=utf-8
Location: /
Server: Microsoft-IIS/8.5
X-AspNetMvc-Version: 4.0
X-AspNet-Version: 4.0.30319
X-Powered-By: ASP.NET
Date: Fri, 26 Sep 2014 14:43:36 GMT
Content-Length: 118
Any ideas why this is starting to happen?
Karl DiggleHi D00gle,
DTD means document type declaration. Using DTD entity expansion, it is easy to make a very small XML data stream fully expand into a very large document.
It will run parser without source limit, so the system will tell you the data has a security issue.
To fix the issue, you can set like below in your code:
XmlReaderSettings settings = new XmlReaderSettings();
settings.ProhibitDtd = false;
Here is a thread about this issue for your reference:
http://stackoverflow.com/questions/13854068/dtd-prohibited-in-xml-document-exception
Feel free to reply if you still have any questions about this.
Best Regards
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact
[email protected]
Zhengyu Guo
TechNet Community Support -
Hi Experts,
I am facing an issue while accessing SharePoint 2013 news feed REST api URL <SiteCollectionURL>/_api/social.feed/my/news from browser giving error "The server encountered an
error processing the request. See server logs for more details."
This is happening after posting the image to news feed without entering any text or description with that. If i post an image with some text or description, then i can able to get the feeds. Or else if i delete the image post then also i can able to get
the feeds.
I can able to see below logs in log files.
Exception occured in scope Microsoft.Office.Server.Social.SPSocialRestFeed._SerializeToOData. Exception=System.MissingMethodException: No parameterless constructor defined for this object. at System.RuntimeTypeHandle.CreateInstance(RuntimeType
type, Boolean publicOnly, Boolean noCheck, Boolean& canBeCached, RuntimeMethodHandleInternal& ctor, Boolean& bNeedSecurityCheck) at System.RuntimeType.CreateInstanceSlow(Boolean publicOnly, Boolean skipCheckThis, Boolean fillCache,
StackCrawlMark& stackMark) at System.RuntimeType.CreateInstanceDefaultCtor(Boolean publicOnly, Boolean skipCheckThis, Boolean fillCache, StackCrawlMark& stackMark) at System.Activator.CreateInstance(Type type, Boolean nonPublic)
at System.Activator.CreateInstance(Type type) at Microsoft.SharePoint.C...
...lient.ValueTypeConverter.<GetODataProperties>d__2.MoveNext() at Microsoft.Data.OData.Atom.ODataAtomPropertyAndValueSerializer.WriteProperties(IEdmStructuredType owningType, IEnumerable`1 cachedProperties, Boolean isWritingCollection,
Action beforePropertiesAction, Action afterPropertiesAction, DuplicatePropertyNamesChecker duplicatePropertyNamesChecker, EpmValueCache epmValueCache, EpmSourcePathSegment epmSourcePathSegment, ProjectedPropertiesAnnotation projectedProperties)
at Microsoft.Data.OData.Atom.ODataAtomPropertyAndValueSerializer.WriteComplexValue(ODataComplexValue complexValue, IEdmTypeReference metadataTypeReference, Boolean isOpenPropertyType, Boolean isWritingCollection, Action beforeValueAction, Action afterValueAction,
DuplicatePropertyNamesChecker duplicatePropertyNa...
...mesChecker, CollectionWithoutExpectedTypeValidator collectionValidator, EpmValueCache epmValueCache, EpmSourcePathSegment epmSourcePathSegment, ProjectedPropertiesAnnotation projectedProperties) at Microsoft.Data.OData.Atom.ODataAtomPropertyAndValueSerializer.WriteProperty(ODataProperty
property, IEdmStructuredType owningType, Boolean isTopLevel, Boolean isWritingCollection, Action beforePropertyAction, EpmValueCache epmValueCache, EpmSourcePathSegment epmParentSourcePathSegment, DuplicatePropertyNamesChecker duplicatePropertyNamesChecker,
ProjectedPropertiesAnnotation projectedProperties) at Microsoft.Data.OData.Atom.ODataAtomPropertyAndValueSerializer.WriteProperties(IEdmStructuredType owningType, IEnumerable`1 cachedProperties, Boolean isWritingCollection, Action beforePropertie...
...sAction, Action afterPropertiesAction, DuplicatePropertyNamesChecker duplicatePropertyNamesChecker, EpmValueCache epmValueCache, EpmSourcePathSegment epmSourcePathSegment, ProjectedPropertiesAnnotation projectedProperties) at Microsoft.Data.OData.Atom.ODataAtomPropertyAndValueSerializer.WriteComplexValue(ODataComplexValue
complexValue, IEdmTypeReference metadataTypeReference, Boolean isOpenPropertyType, Boolean isWritingCollection, Action beforeValueAction, Action afterValueAction, DuplicatePropertyNamesChecker duplicatePropertyNamesChecker, CollectionWithoutExpectedTypeValidator
collectionValidator, EpmValueCache epmValueCache, EpmSourcePathSegment epmSourcePathSegment, ProjectedPropertiesAnnotation projectedProperties) at Microsoft.Data.OData.Atom.ODataAtomPropertyAndValueSeriali...
...zer.WriteCollectionValue(ODataCollectionValue collectionValue, IEdmTypeReference propertyTypeReference, Boolean isOpenPropertyType, Boolean isWritingCollection) at Microsoft.Data.OData.Atom.ODataAtomPropertyAndValueSerializer.WriteProperty(ODataProperty
property, IEdmStructuredType owningType, Boolean isTopLevel, Boolean isWritingCollection, Action beforePropertyAction, EpmValueCache epmValueCache, EpmSourcePathSegment epmParentSourcePathSegment, DuplicatePropertyNamesChecker duplicatePropertyNamesChecker,
ProjectedPropertiesAnnotation projectedProperties) at Microsoft.Data.OData.Atom.ODataAtomPropertyAndValueSerializer.WriteProperties(IEdmStructuredType owningType, IEnumerable`1 cachedProperties, Boolean isWritingCollection, Action beforePropertiesAction,
Action afterPropertiesAct...
Can anyone please help me out.
Thanks!
dineshO365,
Is this still an issue?
Thanks!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it! -
Hi,
I am installing the SharePoint-2013 on development virtual machine. and i have the following environment.
Windows server : 2012
SQL server 2012(enterprise edition)
Active directory(domain) is configured on same server.
for SharePoint configuration purpose i had created SP_farm account with SQL server DB_creator,security admin etc rights.
even though m facing this issue related with socket exception.
Error in log file :
04/08/2014 12:26:33 1 INF Trying to see if port 35513 is free on machine SHAREPOINT2013. Min port we will try is
1024, Max port we will try is 49151
04/08/2014 12:26:35 1 INF A SocketException was thrown with SocketError ConnectionRefused
04/08/2014 12:26:35 1 INF Connect has been refused for port 35513, so we will consider this a free port
04/08/2014 12:26:35 1 INF Have not found a free port yet. Number of tries is 1. Min port we will try is 1024, Max
port we will try is 49151
04/08/2014 12:26:35 1 INF Adding port 35513 to the exclusion list so it is not chosen again during this run
So m bit confuse about is this error related to network issue or something else that i have to configure on server.
any suggestion or reply will be appreciated..!:-)
ShivIs the firewall turned on?
Regards, Matthew
MCPD | MCITP
My Blog
View
Matthew Yarlett's profile
See my webpart on the TechNet Gallery that allows administrative users to upload, crop and format user profile photos. Check it out here:
Upload and Crop User Profile Photos -
Error when protecting SharePoint 2013
Hi,
I am having issue to protect SharePoint 2013 with DPM 2012 R2 .
I get the Error: DPM cannot protect this SharePoint farm as it cannot detect the configuration of the dependent SQL databases. (ID: 32008)
I found this troubleshooting page and followed instructions, but still same issue:
http://social.technet.microsoft.com/wiki/contents/articles/30061.troubleshoot-id-32008-dpm-cannot-protect-this-sharepoint-farm-as-it-cannot-detect-the-configuration-of-the-dependent-sql-databases.aspx
Any help here or guidance will be much appreciated.
Thank you.
-MehdiHi,
That's my bad. The SQL query is incorrect which cannot get the DSN as a result. I'll edit my reply soon for avoiding mislead others.
I also checked the key and the result is the same as yours:
Data Source=SQL;Initial Catalog=SharePoint_Config;Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max Pool Size=100;Connect Timeout=15
I searched and it could also be caused by a configuration cache. Please refer to this article for clearing the cache, reboot and see the result.
Clearing the Configuration Cache
http://blogs.msdn.com/b/jamesway/archive/2011/05/23/sharepoint-2010-clearing-the-configuration-cache.aspx
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Can Double Byte Codes be used in SharePoint 2013?
Hello,
I am looking to create a SharePoint but for Japanese users. I understand that Double Byte Codes will need to be used when entering information due to the Japanese language. I have been informed that this can sometimes cause an issue with SharePoint.
I am looking to test this however I wanted to understand if this can be done / are there any considerations when using DBC's on SharePoint etc and any limitations.
Any assistance would be greatly appreciated.
Thanks
KPHi KP,
Yes, SharePoint 2013 supports Double Byte Unicode characters:
If you have non-standard ASCII characters, such as high-ASCII or double-byte Unicode characters, in the SharePoint URL, each of those characters is URL-encoded into two or more ASCII characters when they are passed to the Web browser. Thus, a URL with many
high-ASCII characters or double-byte Unicode characters can become longer than the original un-encoded URL. The list below gives examples of the multiplication factors:
High-ASCII characters — for example, (!, ", #, $, %, &, [Space]): multiplication factor = 3
Double byte Unicode characters — for example, Japanese, Chinese, Korean, Hindi: multiplication factor = 9
For example, when you translate the names of sites, library, folder, and file in the URL path http://www.contoso.com/sites/marketing/documents/Shared%20Documents/Promotion/Some%20File.xlsx into Japanese, the resulted encoded URL path will become something
like the following:
http://www.contoso.com/sites/%E3%83%9E%E3%83%BC%E3%82%B1%E3%83%86%E3%82%A3%E3%83%B3%E3%82%B0/%E6%96%87%E6%9B%B8/DocLib/%E3%83%97%E3%83%AD%E3%83%A2%E3%83%BC%E3%82%B7%E3%83%A7%E3%83%B3/%E3%83%95%E3%82%A1%E3%82%A4%E3%83%AB.xlsx. This path is 224 characters,
whereas the original URL path is only 94 characters.
In most cases, one UTF-16 character equals one UTF-16 code unit. However, characters that use Unicode code points greater than U+10000 will equal two UTF-16 code units. These characters include, but are not limited to, Japanese or Chinese surrogate pair
characters. If your paths include these characters, the URL length will exceed the URL length limitation with fewer than 256 or 260 characters.
Reference:
https://technet.microsoft.com/en-us/library/ff919564%28v=office.14%29.aspx?f=255&MSPPError=-2147217396
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]. -
Send Email Summary using with SharePoint 2013 designer Workflow
Dear Friends,
please find the scenario below,and provide your solution for this.
1.SharePoint 2013 task list have 'N' number of tasks with Assigned to people.
2.Each task assigned to some person like Person 1 has Task 1 & Task 2 - Person 2 has Task 3 & Task 4.
3.In end of the day both the guys will get a single email alert with assigned tasks URL's.
I need a solution using with only SharePoint Designer 2013 workflow.
Please help me out.
Thanks in Advance :)
abbijohnHi Victoria,
I want configurable email template like below, this email template resides in emailmessages list.(configurable)
Hello
{CurrentItem:
CreatedBy},
Please
review and
approve {CurrentItem:
Title}</a>.
What I want is when I use this email message pulled up from email message list in designer workflow for actual list, it should replace CurrentItem:
Title with current item title.
But it does not work. The benefit of this approach
is if I want to change email content, I just goto emailmessages list and change the content and workflow will take it.
But it does not work and workflow takes
CurrentItem:
Title as text.
MCTS Sharepoint 2010, MCAD dotnet, MCPDEA, SharePoint Lead -
How to create Custom error message in SharePoint 2013
Hi,
I have created one document library.On uploading the same file SharePoint throws error as"server error.The same file exit".
But my requirement is not to show the SharePoint default message.I wanted to create custom message and show the pop up for the same file upload.
Is there any way to create any custom error page or can I manipulate SharePoint default error page?
Any help?
Thank youHi,
You can create an event receiver to set the validation error messages. One such post to redirect the custom error page is as follows
https://social.msdn.microsoft.com/Forums/office/en-US/2bc851f6-e04b-4550-b87f-9b874a290482/sharepoint-event-receivers-and-custom-error-messages?forum=sharepointdevelopmentlegacy
Create custom error page for SharePoint event receiver
Please mark it answered, if your problem resolved or helpful. -
I've been getting a list of folders and files from Sharepoint (on Office 365) by using the following C# code...
var folders = ListFolders(libraryName, clientContext, web);
public List<Folder> ListFolders(string libraryName, ClientContext clientContext, Web web)
var list = GetDocumentLibrary(libraryName, clientContext, web);
var folders = list.RootFolder.Folders;
clientContext.Load(folders);
clientContext.ExecuteQuery();
return folders.ToList();
public List GetDocumentLibrary(string libraryName, ClientContext clientContext, Web web)
var query = clientContext.LoadQuery(web.Lists.Where(p => p.Title == libraryName));
clientContext.ExecuteQuery();
return query.FirstOrDefault();
It was working fine until I rebooted my computer (it installed a Windows Update), I strongly suspect, based on some testing I've done, it is caused by http://support.microsoft.com/kb/2964358
When the *clientContext.ExecuteQuery()* statement is reached in *GetDocumentLibrary()*, the
following exception is thrown.
*An unhandled exception of type 'System.Xml.XmlException' occurred in System.Xml.dll
Additional information: For security reasons DTD is prohibited in this XML document. To enable DTD processing set the DtdProcessing property on XmlReaderSettings to Parse and pass the settings into XmlReader.Create method.*
I'm wondering how I can work around this, as I'm not consciously using System.XML, it's a background function or process when the ExecuteQuery runs.
Can I pass some additional XMLReader info to this or clientContext (I'm assuming not), so I'm not sure how to execute this query to prevent the DTD error. I have also tried accessing the list in a different manner, by using this code... (from Microsoft's MSDN
pages)
List list = clientContext.Web.Lists.GetByTitle(libraryName);CamlQuery camlQuery = new CamlQuery(); camlQuery.ViewXml = "<View/>";ListItemCollection listItems = list.GetItems(camlQuery);clientContext.Load(list); clientContext.Load(listItems);clientContext.ExecuteQuery();
This works on a computer without the KB above, however on my PC it doesn't (I get the same exception as my other code) , obviously uninstalling the KB will make things work in the short term, but its no good in the longer term. Any advice on how to avoid
this error would be greatly appreciated. I can only assume there will be a "preferred" way from Microsoft for accessing lists now this KB is implemented, but I'm clueless as to what it is.
Thanks
DougieI've found that the issue is related to certain ISP's providing a "search assistance" page when a request returns an error due to no DNS entry matching that URL. For example, if you use Verizon in the USA, and go to www.somenonexistanturl.com, it will
"helpfully" respond to you with a search results page of possible options to match the URL you requested.
Because this is not the expected XML that the SP Client Context library was looking for (i.e., it does not have the DTD that it validates), the exception is thrown. The offending request that I have seen in my case is to the following URL: http://msoid.[my
office 365 acct name].onmicrosoft.com/FPUrl.xml
A simple resolution is to change your network connection adapter settings to use a DNS server IP other than the one auto-retrieved from your ISP, such as Google's (8.8.8.8 and 8.8.4.4). It's not a long term fix, since you'd breaking the ability to resolve
internal resources from a private or corporate network (unless the private network is also setup with Google's IP for the DNS gateway).
While you may have not changed any of your code, I would bet that you changed how/where you access the internet from when it was working to when it stopped working.
What I am not entirely sure of is why did this start happening all of a sudden - was it a change from MSFT that broke the URL, or did the ISP(s) decide to become extra helpful with bad URLs?
HTH
--Thiago
--Thiago -
not able to delete "Document" content type from a library. I have a custom content type. I have added the custom content type to all the items of library. also, i have added the custom columns from "Document" content type to my custom
content type. Still cannot delete the "Document" content type. I am doing the same process in different site collections and different libraries. But not able to delete in a few say- 10 in 100. Get the error - "Document content type is still
in use"Hello
Here you go
http://blog.octavie.nl/index.php/2012/09/14/error-the-content-type-is-in-use-explained
https://social.technet.microsoft.com/Forums/en-US/e81020e3-2c12-4f39-a2f4-f1fd88ba6547/content-type-is-still-in-use-on-document-library
Please remember to click 'Mark as Answer' on the answer if it helps you -
Authentication error using PAPI-WS for BPM Studio 10.3
I followed the steps laid out in the material from this thread using SOAP UI:
PAPI Web Service (PAPI-WS) Example for Oracle BPM Studio
It seems that BPM Studio does not recognize the default credentials user: "test" and password: "test"
I receive the following error when I try to make any call:
<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/">
<S:Body>
<S:Fault xmlns:ns3="http://www.w3.org/2003/05/soap-envelope">
<faultcode>S:Client</faultcode>
<faultstring>Participant could not be authenticated. A wrong username or password might have been specified.</faultstring>
<detail>
<oens:OperationException xmlns:oens="http://bea.com/albpm/PapiWebService">
<exceptionName>fuego.papi.webservice.handlers.AuthenticationException</exceptionName>
<message>Participant could not be authenticated. A wrong username or password might have been specified.</message>
<technicalInfo>fuego.papi.webservice.handlers.AuthenticationException: Participant could not be authenticated. A wrong username or password might have been specified.
at fuego.papi.webservice.handlers.AuthenticationHandler.processAuthentication(AuthenticationHandler.java:144)
at fuego.papi.webservice.handlers.AuthenticationHandler.handleMessage(AuthenticationHandler.java:74)
at fuego.papi.webservice.handlers.AuthenticationHandler.handleMessage(AuthenticationHandler.java:46)
at com.sun.xml.ws.handler.HandlerProcessor.callHandleMessage(HandlerProcessor.java:292)
at com.sun.xml.ws.handler.HandlerProcessor.callHandlersRequest(HandlerProcessor.java:135)
at com.sun.xml.ws.handler.ServerSOAPHandlerTube.callHandlersOnRequest(ServerSOAPHandlerTube.java:133)
at com.sun.xml.ws.handler.HandlerTube.processRequest(HandlerTube.java:116)
at com.sun.xml.ws.api.pipe.Fiber.__doRun(Fiber.java:595)
at com.sun.xml.ws.api.pipe.Fiber._doRun(Fiber.java:554)
at com.sun.xml.ws.api.pipe.Fiber.doRun(Fiber.java:539)
at com.sun.xml.ws.api.pipe.Fiber.runSync(Fiber.java:436)
at com.sun.xml.ws.server.WSEndpointImpl$2.process(WSEndpointImpl.java:243)
at com.sun.xml.ws.transport.http.HttpAdapter$HttpToolkit.handle(HttpAdapter.java:444)
at com.sun.xml.ws.transport.http.HttpAdapter.handle(HttpAdapter.java:244)
at com.sun.xml.ws.transport.http.servlet.ServletAdapter.handle(ServletAdapter.java:135)
at com.sun.xml.ws.transport.http.servlet.WSServletDelegate.doGet(WSServletDelegate.java:129)
at com.sun.xml.ws.transport.http.servlet.WSServletDelegate.doPost(WSServletDelegate.java:160)
at com.sun.xml.ws.transport.http.servlet.WSServlet.doPost(WSServlet.java:75)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:243)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Unknown Source)
at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:275)
at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:161)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:245)
at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:50)
at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:156)
at java.security.AccessController.doPrivileged(Native Method)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:152)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:667)
at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
at java.lang.Thread.run(Unknown Source)
Caused by: fuego.papi.exception.AuthenticationException: Cannot authenticate participant 'test'.
at fuego.papi.impl.ProcessServiceImpl.authenticatePassport(ProcessServiceImpl.java:297)
at fuego.papi.webservice.pool.ProcessServiceSessionPoolManager.getSession(ProcessServiceSessionPoolManager.java:185)
at fuego.papi.webservice.WebServiceManager.getProcessServiceSession(WebServiceManager.java:156)
at fuego.papi.webservice.handlers.AuthenticationHandler.processAuthentication(AuthenticationHandler.java:141)
... 45 more
Caused by: fuego.directory.AuthenticationException: Login incorrect.
Detail:Verify that the information provided is correct.
If you cannot solve the problem, check with your administrator.
ID [default] PARTICIPANT [test] REASON [Login incorrect.
Detail:Verify that the information provided is correct.
If you cannot solve the problem, check with your administrator.
ID [Project:Test] PARTICIPANT [test] REASON [invalid username or password].
at fuego.directory.AuthenticationException.wrap(AuthenticationException.java:104)
at fuego.directory.project.engine.EmbeddedEngineAuthenticationAccessor.connect(EmbeddedEngineAuthenticationAccessor.java:69)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at fuego.directory.provider.DirectorySessionImpl$AccessorProxy.invoke(DirectorySessionImpl.java:756)
at $Proxy12.connect(Unknown Source)
at fuego.directory.provider.DirectorySessionImpl.connect(DirectorySessionImpl.java:250)
at fuego.directory.provider.Factory.startSession(Factory.java:405)
at fuego.directory.Directory.startSession(Directory.java:268)
at fuego.papi.impl.ProcessServiceImpl.authenticatePassport(ProcessServiceImpl.java:287)
... 48 more
Caused by: fuego.directory.AuthenticationException: Login incorrect.
Detail:Verify that the information provided is correct.
If you cannot solve the problem, check with your administrator.
ID [Project:Test] PARTICIPANT [test] REASON [invalid username or password].
at fuego.directory.project.engine.ProjectFullParticipantsAccessor.fetchHumanParticipant(ProjectFullParticipantsAccessor.java:82)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at fuego.directory.provider.DirectorySessionImpl$AccessorProxy.invoke(DirectorySessionImpl.java:756)
at $Proxy15.fetchHumanParticipant(Unknown Source)
at fuego.directory.project.engine.EmbeddedEngineAuthenticationAccessor.connect(EmbeddedEngineAuthenticationAccessor.java:66)
... 58 more</technicalInfo>
</oens:OperationException>
</detail>
</S:Fault>
</S:Body>
</S:Envelope>
Like I said above, it seems that BPM Studio does not recognize the default credentials user: "test" and password: "test"
Is there anyway to change these default credentials?
Thanks!
Edited by: user9001687 on Feb 10, 2010 2:14 PM
Edited by: user9001687 on Feb 10, 2010 2:16 PMThanks so much Dan. I changed as you mentioned and then added WSS-Username Token as while processing BPM process as web service I have used the same opetion. Still I am getting the same error for Authorization Failure.
SOAP Requests look like :
<soapenv:Envelope xmlns:pps="http://bea.com/albpm/ProLogisBPM/PPSFTProcess" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<soapenv:Header>
<wsse:Security soapenv:mustUnderstand="1" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
<wsse:UsernameToken wsu:Id="UsernameToken-2" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
<wsse:Username>Paul</wsse:Username>
<wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">Paul</wsse:Password>
<wsse:Nonce EncodingType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary">AlmoI4QkO2hp9z10BQGA0A==</wsse:Nonce>
<wsu:Created>2010-03-17T15:48:04.843Z</wsu:Created>
</wsse:UsernameToken>
</wsse:Security>
</soapenv:Header>
<soapenv:Body>
Adter
<ns1:stackTrace xmlns:ns1="http://xml.apache.org/axis/">fuego.webservices.security.AuthorizationException: Authorization Failed.
at fuego.soaptype.ProcessWebServiceAuthorization.authorize(ProcessWebServiceAuthorization.java:57)
at fuego.soaptype.AxisSoapService$HttpBasicAuthentitcationHandler.invoke(AxisSoapService.java:888)
at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32)
at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32)
at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32)
at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
at org.apache.axis.handlers.soap.SOAPService.invoke(SOAPService.java:453)
at org.apache.axis.server.AxisServer.invoke(AxisServer.java:281)
at fuego.soaptype.AxisSoapService.invoke(AxisSoapService.java:357)
at fuego.soaptype.AxisSoapService.invoke(AxisSoapService.java:122)
at fuego.webservices.HttpSoapListener.process(HttpSoapListener.java:206)
at fuego.http.HttpExecution$1.run(HttpExecution.java:71)
at fuego.component.Message.process(Message.java:576)
at fuego.component.ExecutionThread.processMessage(ExecutionThread.java:780)
at fuego.component.ExecutionThread.processBatch(ExecutionThread.java:755)
at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:142)
at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:134)
at fuego.http.HttpExecution$HttpPrincipal.processBatch(HttpExecution.java:190)
at fuego.component.ExecutionThread.work(ExecutionThread.java:839)
at fuego.component.ExecutionThread.run(ExecutionThread.java:408)
Caused by: java.lang.IllegalArgumentException: user: null
at fuego.components.WebServiceSessionManager.createSession(WebServiceSessionManager.java:88)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at fuego.lang.JavaClass.invokeMethod(JavaClass.java:1410)
at fuego.lang.JavaObject.invoke(JavaObject.java:227)
at fuego.lang.Invokeable.invokeImpl(Invokeable.java:234)
at fuego.lang.Invokeable.invokeDynamic(Invokeable.java:188)
at fuego.lang.Invokeable.invoke(Invokeable.java:160)
at fuego.fengine.FEngineWebServiceExecutor$2.execute(FEngineWebServiceExecutor.java:133)
at fuego.server.execution.DefaultEngineExecution$AtomicExecutionTA.runTransaction(DefaultEngineExecution.java:304)
at fuego.transaction.TransactionAction.startBaseTransaction(TransactionAction.java:470)
at fuego.transaction.TransactionAction.startTransaction(TransactionAction.java:551)
at fuego.transaction.TransactionAction.start(TransactionAction.java:212)
at fuego.server.execution.DefaultEngineExecution.executeImmediate(DefaultEngineExecution.java:123)
at fuego.server.execution.EngineExecution.executeImmediate(EngineExecution.java:66)
at fuego.fengine.FEngineWebServiceExecutor$1.run(FEngineWebServiceExecutor.java:65)
at fuego.component.Message.process(Message.java:576)
at fuego.component.ExecutionThread.processMessage(ExecutionThread.java:780)
at fuego.component.ExecutionThread.processBatch(ExecutionThread.java:755)
at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:142)
at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:134)
at fuego.fengine.FEngineProcessBean.processBatch(FEngineProcessBean.java:244)
at fuego.fengine.FEngineWebServiceExecutor$WebServiceExecutorPrincipal.processBatch(FEngineWebServiceExecutor.java:168)
... 2 more
Caused by: fuego.directory.AuthenticationException: Login incorrect.
Detail:Verify that the information provided is correct.
If you cannot solve the problem, check with your administrator.
ID [default] PARTICIPANT [null] REASON [participant is empty].
at fuego.directory.AuthenticationException.error(AuthenticationException.java:50)
at fuego.directory.AuthenticationException.participantIdIsWrong(AuthenticationException.java:94)
at fuego.components.WebServiceSessionManager$SessionImpl.<init>(WebServiceSessionManager.java:220)
at fuego.components.WebServiceSessionManager.createSession(WebServiceSessionManager.java:79)
... 26 more</ns1:stackTrace>
Any help or guiding pointer would be deeply appreciated. TIA
Maybe you are looking for
-
Home sharing does not work with apple tv
Can anyone help me. I used to be able to stream all content from my home master computer to my Apply TV. Now it suddenly does not work. Apple TV itself works just fine. I can also airplay using it with out IPADs. I have uninstalled and reinstalled
-
How to download data from an internal table to a text
Hi All, I want to download data from an internal table to a text file. The fields should be pipe(|) separated. I have tried GUI_DOWNLOAD but it is not taking the field separator. The sample of the desired data that i require should be this way:- 134
-
How to retrieve deleted files from sd card asap
Hi All, I accidentally delete the folder in the sd card that was connected to my pc just now, this folder contains the software that runs the camera. Can you please advise as how i can retrieve the folder .Many thanks. Regards Anthony Chau This quest
-
ACR 5.5 vs ACR 6.3 LAB values differ!
Hi, My work requires me to run sampling of LAB values on images. I used to work on CS4 ACR 5.5 and now CS5.1 ACR 6.3. However, i realize the same RAW image with the exact same setting .XMP was appearing different in both platform! ie. the LAB values
-
Why all of a sudden has Lightroom 4.3 started putting x.x MP (where x is a number) such as 9.1 MP under each image I import. This happens even if I create a new catalog and the catalogs that were OK and displayed captions in this Library view now ha