ClamAV 0.94.2 issues - unable to open/parse clamd.conf

Leopard Server 10.5.6
Amavisd-new 2.6.2
Spamassassin 3.2.5
ClamAV 0.94.2
WHITOUT THE LAST 2009 SECURITY UPDATE
Amavisd, Spamassassin and Clamav updated manually using the last osx.topicdesk tutorials
On the mail section of the Server Admin, the Virus Scanning status appears Unknown (Virus scanning:Unknown)
On the Filters settings the "Scan email for viruses" check are enabled, but I don't be able to enable the "Update the virus databases" check.
freshclam.log file is empty
On the system log file appears the errors below:
Mar 1 00:39:18 xserve net.clamav.clamd[30358]: ERROR: Can't open/parse the config file /private/etc/spam/clamav/new/clamd.conf
Mar 1 00:39:18 xserve com.apple.launchd[1] (net.clamav.clamd[30358]): Exited with exit code: 1
Mar 1 00:39:18 xserve com.apple.launchd[1] (net.clamav.clamd): Throttling respawn: Will start in 10 seconds
Mar 1 00:39:18 xserve net.clamav.freshclam[30359]: ERROR: Can't parse the config file /private/etc/spam/clamav/new/clamd.conf
Mar 1 00:39:18 xserve com.apple.launchd[1] (net.clamav.freshclam[30359]): Exited with exit code: 56
Mar 1 00:39:18 xserve com.apple.launchd[1] (net.clamav.freshclam): Throttling respawn: Will start in 10 seconds
Now...
The ClamAV is still functioning?
What is the cause of that errors?
How can I solve this issue?
Any suggestions are welcome

The error means you either made a typo while configuring/installing ClamaAV or that you did not complete the tutorial by downloading the needed configuration files.

Similar Messages

XenApp 6.5 and Acrobat issue: "Unable to open the document".

We are using XenApp 6.5 with a published desktop Windows 7 x64. If we open Acrobat Pro 10.1.5 and Create PDF we get an error "Unable to open the document". If we do the same action directly on the XenApp server then it works as expected. The Word doc in question was created by the test user and is located on their Home drive area so the permissions are correct. If i try to save the Word doc as PDF it works fine directly and indirectly.
There seems to be lots of people asking similar questions here:
http://forums.adobe.com/message/4275334
Thanks
Gary

From the link below:
http://www.adobe.com/devnet-docs/acrobatetk/tools/AdminGuide/citrix.html
what does: Deploy enterprise files to the product’s directories (rather than per-user directories) so they are available to all users mean in practice...?

Post upgrade to 3.1 issues : Unable to open report query

Hi,
We have upgraded our APEX version from 3.0 to 3.1. We have some wierd problems now
1. I tried to add a new column link to an existing report region and I get an error.
failed to parse SQL query:
ORA-00911: invalid character
2. I have to make some changes to an existing report query and I am unable to open it. I Get the following error:
ORA-01461: can bind a LONG value only for insert into a LONG column
Can anybody let me know the reason for these errors.
Thanks
Knut

Hi Scott,
We created a test case on apex.oracle.com in my workspace (DGIELIS_31)
It's Application 54025, the query is called "Test Big Query".
Currently it works, but edit the query and copy one of the comment lines and paste it in to take it over 4k. You should get the same error.
Just for the record:
- in APEX 3.0 in a non UTF-8 (WE8ISO8859P15) database this query was working
- When migrating to UTF-8 database with APEX 3.1.1 we can't open the queries.
- We can't use a view in this case, it's a pretty complex query which already uses MV's and the tables in questions are pretty huge. The query we had to come up with is pretty big to get optimal performance.
If you want I can email you my login details or create you a user.
Regards,
Dimitri
-- http://dgielis.blogspot.com/
-- http://www.apex-evangelists.com/
-- http://www.apexblogs.info/

Reporting Service issue: Unable to open reports (.rdl files) from SharePoint 2013

Hi All,
I am facing issue while accessing reports from SharePoint sites and below is the error message.
Report Server has encountered a SharePoint error. ---> Microsoft.ReportingServices.Diagnostics.Utilities.SharePointException: Report Server has encountered a SharePoint error. ---> Microsoft.SharePoint.SPException: Virus Found: ---> System.Exception:
For more information about this error navigate to the report server on the local server machine, or enable remote errors (Fault Detail is equal to Microsoft.ReportingServices.ServiceContract.RsExceptionInfo).
Error message shows "Virus Found", so we have disabled the antivirus scanning (Symantec Protection for real time scanning) and it started working.
We have tried to add ".rdl" and ".rsds" files in the exception, but didn't work. Noticed that issue is happening when we enabled the option "Scan the item when download".
Please suggest how we can rectify the issue without disabling any Symantec settings.
Thanks,
Anoop

Hi Anoop,
Not sure this option "Scan the item when download" of Symantec will do what action, you may want to get more info from symantec, it seems you have posted in symantec official forum
here, I would recommend to keep an eye on updates there.
Thanks
Daniel Yang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

CRM 7.0 Unable to open/view PDF Attachments in Email (Intermittent issue)

Hi,
Unable to open an attachment (PDF format) sent from exchange server(Lotus) to SAP CRM,Actually its an intermittent issue When i try to open email in UI ,getting an error message "File is damaged and couldnot be repaired".
I understand that PDF attachment wasn't delivered(Synchronization issue between Lotus and CRM) to SAP CRM system properly by the exchange server ( Lotus ).Hence the particular attachments are not able to view/open in SAP CRM system.
Is there anyway to trace and find out root cause of the issue?
Regards,
Shan

Issue with IE version and some PDF wasn't delivered properly by lotus exchange server

Unable to Open Project Site Access Denied Issue Project 2013

This issue is happening to select projects and select project managers, they can view certain project sites but receive the error on other projects. After some extensive testing
it looks like if the PM is the owner of the project plan they are not getting added to any of the synced groups for the project site. I can change the project owner to any another PM and it processes correctly and adds them to the PM synced group on
the Project site. As soon as I make the original PM the Project plan owner again the previous PM gets removed from the PM synced group and added to the Team member synced group, the way its supposed to work. However the PM with the problem never
gets added to any group. I have to manually add them to the non-synced Owner group on the project site so they don't get removed from the synced PM group the next time the sync runs at midnight.
As I stated it is happening on select project plans and select PMs. I have tried replublishing the project plan via Project professional and the web and the results are the same.
If I create a new project plan and assign one of the PMs with the issue to the plan everything works correctly. We noticed the issue a few weeks ago; most of the plans with the issue are several months to a year old so they were working correctly until
recently. They had also made PM owner changes prior to the issue on most of those plans and everything worked correctly.
If anyone is experiencing this issue and has a fix please let me know. I am trying not to open an MS support ticket if possible.
Frank Miranda Florida Hospital MIS

I believe I've found the fix for this issue. After opening a ticket with MS support and not getting anywhere with this issue I decided to do an in-depth review of all the Project and SharePoint 2013 CU's starting with December 2013 to September 2014.
To my amazement buried inside the July 2014 CU was a hotfix for this issue described almost word for word. (I will list all the relevant KB's at the end) I contacted my support engineer inquiring about this hotfix and he stated it wasn't relevant because
the "Synchronize Project Web App permissions to Project Site" was not failing or even generating any warnings in our Prod or Test environments. I stated that is not always an indicator as ULS doesn't always catch all relevant errors.
I informed him that I also found a second hotfix pertaining to the same issue released August 2014, apparently the first hotfix in July didn't totally resolve the issue and a second hotfix was released. He was adamant that this would not resolve
our issue and he requested or production databases because he was unable to replicate the issue in his test environment. The reason, you may wonder, is because he was at a higher patch level that our farm.... Obviously! His farm had the most current
CU which included the hotfixes from July and August. Apparently he didn't see the flaw in his logic.
I decided to install the September CU on our test farm. Low and behold that fixed the problem, even though MS support stated the hotfix was not relevant to our issue. I learned a long time ago to take MS support comments as suggestions instead
of gospel truth, this isn't the first time they have confidently given me erroneous information.
We are currently doing further testing to verify that this CU didn't break something else. Unfortunately these rollups are not GA and Microsoft is very clear that you should only install them if the hotfixes pertain directly to your issue.
Finding the hotfixes was a chore as Microsoft loves to create multiple KB's for the same thing and then nest (bury) them so you have to dig through four or five KB's to find the relevant fix. I'll save you the trouble and list them below.
Watch the
September CU Webcast Brian Smith and team go into depth explaining why this issue has been happening and how they fixed it.
September 2014 CU http://support.microsoft.com/kb/2882990 (the one I installed)
August 2014 CU https://support.microsoft.com/kb/2989078
August Project site sync hotfix
https://support2.microsoft.com/kb/2883083
July 2014 CU http://support.microsoft.com/kb/2882990
July Project Site Sync hotfix http://support2.microsoft.com/kb/2882995
Microsoft Project Server Blog
http://blogs.technet.com/b/projectsupport/ (I find this to be more helpful than the TechNet site)
Frank Miranda Florida Hospital MIS

Unable to Open Project Site Access Denied Issue (Project Manager)

Hi
We got an issue that one project manager is having 12 projects, in that she can able to view 5 projects-- project sites but remaining 7 projects --- she is not able to open the project site (access denied) error is throwing when she try to open.
She is the project manager of the 12 projects and having project manager permissions on the project sites.
Please suggest any solution for this.
Geeth If you feel that the answer which i gave you is Helpful please select it as Answer/helpful.

I believe I've found the fix for this issue. After opening a ticket with MS support and not getting anywhere with this issue I decided to do an in-depth review of all the Project and SharePoint 2013 CU's starting with December 2013 to September 2014.
To my amazement buried inside the July 2014 CU was a hotfix for this issue described almost word for word. (I will list all the relevant KB's at the end) I contacted my support engineer inquiring about this hotfix and he stated it wasn't relevant because
the "Synchronize Project Web App permissions to Project Site" was not failing or even generating any warnings in our Prod or Test environments. I stated that is not always an indicator as ULS doesn't always catch all relevant errors.
I informed him that I also found a second hotfix pertaining to the same issue released August 2014, apparently the first hotfix in July didn't totally resolve the issue and a second hotfix was released. He was adamant that this would not resolve
our issue and he requested or production databases because he was unable to replicate the issue in his test environment. The reason, you may wonder, is because he was at a higher patch level that our farm.... Obviously! His farm had the most current
CU which included the hotfixes from July and August. Apparently he didn't see the flaw in his logic.
I decided to install the September CU on our test farm. Low and behold that fixed the problem, even though MS support stated the hotfix was not relevant to our issue. I learned a long time ago to take MS support comments as suggestions instead
of gospel truth, this isn't the first time they have confidently given me erroneous information.
We are currently doing further testing to verify that this CU didn't break something else. Unfortunately these rollups are not GA and Microsoft is very clear that you should only install them if the hotfixes pertain directly to your issue.
Finding the hotfixes was a chore as Microsoft loves to create multiple KB's for the same thing and then nest (bury) them so you have to dig through four or five KB's to find the relevant fix. I'll save you the trouble and list them below.
Watch the
September CU Webcast Brian Smith and team go into depth explaining why this issue has been happening and how they fixed it.
September 2014 CU http://support.microsoft.com/kb/2882990 (the one I installed)
August 2014 CU https://support.microsoft.com/kb/2989078
August Project site sync hotfix
https://support2.microsoft.com/kb/2883083
July 2014 CU http://support.microsoft.com/kb/2882990
July Project Site Sync hotfix http://support2.microsoft.com/kb/2882995
Microsoft Project Server Blog
http://blogs.technet.com/b/projectsupport/ (I find this to be more helpful than the TechNet site)
Frank Miranda Florida Hospital MIS

Unable to open email inbox or files. screen changed suddenly last night. got some message about patch not being applied. i have the patience of a gnat and have no clue how to fix this issue. HELP! in English

I'm running Mozilla-firefox on a Lenovo laptop. Last night the screen changed suddenly. brief alert about patch. unable to open email inbox to read/send emails. logged off thinking all would be right by morning. today, can access internet, google, etc, but unable to open email inbox. plus the listing of the various yahoo accts has changed the sequence order. please help. i depend on my email for my livelihood. i can read emails on my blackberry so the issue is not my internet provider.

In the patch 29, it is
function encode_attachment(str) {
var c, i, s = ''
for (i = 0; i < str.length; i++) {
switch (c = str.charAt(i)) {
case ' ':
case '#':
case '?':
case '%':
s += NN ? '_' : escape(c); break
default:
s += c
return s
NO issues seen, Able to open attachment which has space in the file name.

Flex Compiler API Issue: Error: unable to open './flex-config.xml'

1) I make a java struts(or a servlet) to build swf file
dynamically when receiving the request from client. The struts
source code please see the attached code. deploy the structs to the
Tomcat
2) then copy the <Flex_SDK>/frameworks to the
<tomcat_home>/webapps/dozhang/WEB-INF
3) then copy the all the libraries under the
<Flex_SDK>/lib to the
<tomcat_home>/webapps/dozhang/WEB-INF/lib
4) Copy a test a.mxml to c:\
5) Start up Tomcat , access the structs, I will get the
Error: unable to open './flex-config.xml' in the tomcat log.
Can anyone tell me how to specify the location of the
flex-config.xml ?

Ok, I solved it by myself
I need to add the following codes when calling the Compiler
API
Configuration conf = application.getDefaultConfiguration();
conf.setToken("flexlib", "path to the frameworks")
applicaiton.setConfiguration(conf);
Then it solved the problem

TS2570 Still cant access my computer, followed instructions to perform a safe boot and last line of script it shows: BootCacheControl: Unable to open /Var/db/BootCache.playlist:2 No such file or directory. Any idea?

Brand new Mac Book Pro
Purchased in Mexico's Department store Liverpool on June 20th 2012
Purchased Memory upgade to 8Gb, on june 27th, at Apple Store Memorial City, Houston
Upgraded memory from 4Gb to 8Gb on June 28th.
Tried to write on my external HD (previously written on a windows based PC) with no success.
Upon reccomendation from a Mac assistant, copied all my external HD contents into my Mac Hard drive.
Then formatted my external HD and copied back all my information to it.
deleted all the information from my MacBook Pro HD.
Attempted to repeat the same operation with another external HD, but got a message saying there was not enough epace on the computer HD (even though I have a 750Gb Hard Drive.
Looked in the trash bin and there it was, all the information previously deleted..
Could not empty the trash bin, although I got a message asking me to safely delete all the information from the trash bin,
Could not get enough space released, after several attpempts the trash bin was finally emptied.
All happy getting acquainted with my new MacBook Pro. Two days later, got a gray screen and not able to start the computer.
Looking in to Mac support I found article http://support.apple.com/kb/TS2570 and followed instructions to perform a safe boot:
"Perform a Safe Boot
Simply performing the Safe Boot may resolve this issue.
Shut down your Mac. If necessary, hold your Mac's power button for several seconds to force it to power down.
Start your Mac, then immediately hold the Shift key. This performs a Safe Boot. Advanced tip: If you want to
see the status of a Safe Boot as it progresses, you can hold Shift-Command-V during start up (instead of just Shift).
Note: A Safe Boot takes longer than a typical start up because it includes a disk check and other operations.
The following is the script that appears on the screen upon safe boot. and halt after the last line.
AppleACPICPU:Processor Id=6 LocalAplicId=255 Disabled
AppleACPICPU:Processor Id=7 LocalAplicId=255 Disabled
AppleACPICPU:Processor Id=8 LocalAplicId=255 Disabled
calling mpo_policy_init for TMSafetyNet
Security policy loaded: Safety net for Time Machine (TMSafetyNet)
calling mpo_policy_init for Sandbox
Security policy loaded: Seatbelt sandbox policy (Sandbox)
calling mpo_policy_init for Quarantine
Security policy loaded: Quarantine Policy (Quarantine)
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California. All Rights Reserved.
MAC Framework Succesfully initializad
using 16384 buffer headers and 10240 cluster IO buffer headers
IOAPIC: Version 0x20 Vextors 64:87
ACPI: System State [SO S3 S4 S5] (S3)
PFM64 (36cpu) 0xf10000000, 0xf0000000
Aplconsole relocated to 0xf1000000
PCI configuration changed (bridge=16 device=4 cardbus=0)
[ PCI configuration end, bridges 12 devices 16 ]
Firewire (OHCI) Lucent ID 5901 built-in now active, GUID 3c0754fffe9b2aa2; max speed s800.
Pthread support ABORTS when sync kernel primitives misused
com.apple.AppleFSCompressionTypeZlib kmod start
com.apple.AppleFSCompressionTypeDataless kmod start
com.apple.AppleFSCompressionTypeZlib load succeeded
com.apple.AppleFSCompressionTypeDateless load succeeded
AppleIntelCPUPowerManagementClient: ready
BTCOEXIST off
wl0: Broadcom BCM4331 802.11 Wireless controller
5.100.98.75
AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitializad
rooting via boot-uuid from /chosen: 6E918706-FC0D-37460-A3A0-6268A51DF93B
Waiting on <dict ID="0"><key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleAPIPCI/SATA@1F,2/AppleIntelPchSe riesAHCI/PRT0@0/AOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlock
storageevice /IoBlockStorageDriver/TOSHIBA MK7559GSXF Media/IOGUIDPartit
BSD root: disk0s2, major 14, minor 2
Kernel is LP64
com.apple.launchd 1   com.apple.launchd 1   *** launchd[1] has started up. ***
com.apple.launchd 1   com.apple.launchd 1   *** Verbose boot, will log to /dev/console. ***
Running fsck on the boot volume...
** /dev/rdisk0s2 (NO WRITE)
** Root file system
   Executing FSCK_HFS (version diskdev_cmds-540.1~25).
BootCacheControl: UNable to open /Var/db/BootCache.playlist:2 No such file or directory
launchctl:Dubious permissions on file (skipping): /Library/LaunchDaemons
launchctl:Dubious permissions on file (skipping): /System/Library/LaunchDaemons
Any help or suggestions on what to do next would be welcomed.
I am in the middle of the Atlantick, stuck with a brand new, non working Apple MacBook Pro.
Best regards
Sergio Ramos

Reinstalling MacOS does NOT fix the problem for me. I'm still searching a solution !
Bernard

Unable to open .eps file "unknown format and cannot be opened" ?

A client sent me an .eps file (logo). I tried opening it in Illustrator AND photoshop (just to see if it was saved in one vs the other program) - however to no avail.
Illustrator gives me a message "unknown format and cannot be opened"
Photoshop gives me a message "photoshop was unable to parse the postscript".
I'm using Adobe CS4, and I've never seen this message before—would love to know what this means and how to resolve?
File attached if anyone is able to open / fix it?
Thanks kindly,
Chemol

Thanks for the advice Scott - does compression improve the .eps? Is it
silly for me to ask them to compress it since the file is only 766 KB
(that's how big the attachment is in my email - though I am unable to open
it)?
My friend is able to open it on his end - however the 3rd person (client) is
the one who sent it, and I have already requested a different version - no
response from them yet. Unfortunately what the company "has" is what he
will likely give to me again (ie: same file / unable to open). So ... I am
curious about how I can resolve this issue on my end - if possible?
Do you know what the AI and Photoshop error messages mean? Could the issue
be a mac vs PC concern? Or is it a corrupt file? Could it be a software
version issue (old vs new) ... or Quark incompatibility?
.... just guessing at this point....Any insight as to what different
scenarios may apply in this situation would be greatly appreciated ..thank
you.

ZAV 10 - Unable to open parameter file error

When trying to launch a ZAV 10 app, C-Cure Administration Console, users are getting an error "**Unable to open parameter file cc800cl.pf, errno 2. (1247)". This only appears to be happening on Win7. This did work when first created, but after a few weeks the error has started to pop-up.

If this was working and is not now, and you are certain nothing has changed on the client systems (or at least nothing that could interfere here), then this might be an issue with the license used when building the application. What is the expiry date of your license and was it applied prior to building this exe?
If this isn't expiring please open an SR for this issue, if you can. This is the information the support team will require:
- Copies of any warnings or errors around the time the issue occurs (or a copy of the application and system event logs, in .evtx format)
- A copy of the exe you are using
- If you can build the exe again as a diagnostic-mode executable and provide the diagnostics generated when attempting to run, that can be very helpful
- It may also be required that you send installation media for the application and your build process, so the team can attempt to reproduce the issue in-house
- You will also typically be asked for the .xappl file and associated Files folder, if reproducing in-house is required. This will become absolutely necessary if a ticket needs to be filed with Spoon, so sending it ahead of time is a good idea

Unable to open Enterprise Manager in web browser

Hi All,
I have configured EM in my single instance database in Windows server 2008 inside VMware . But i am unable to open em in web browser.
C:\Users\Administrator>emctl status dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
https://WIN-4RW5HRZKIEB:1158/em/console/aboutApplication
Oracle Enterprise Manager 11g is running.
Logs are generated in directory C:\app\oracle\product\11.2.0\dbhome_1/WIN-4RW5HRZKIEB_dipu/sysman/log
and my listener status
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Production
Start Date 11-APR-2013 23:06:27
Uptime 0 days 0 hr. 58 min. 46 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Log File c:\app\oracle\diag\tnslsnr\WIN-4RW5HRZKIEB\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=WIN-4RW5HRZKIEB)(PORT=1521)))
Services Summary...
Service "arya1XDB" has 1 instance(s).
Instance "arya1", status READY, has 1 handler(s) for this service...
Service "dipu" has 1 instance(s).
Instance "arya1", status READY, has 1 handler(s) for this service...
The command completed successfully
But when i am entering the eterprise manager link(https://WIN-4RW5HRZKIEB:1158/em) on my web browser of windows 2008 nothing is comming. please tell me how to resolve it
Regards,
Arya

I'm having a similar issue.
Did a fresh install of 11.2.0.1.0 under Windows 2003 - latest updates - IE 8.
I can access Enterprise Manager from other computers - but not from the local server.
I've tried both: https://oracle.xxxx.xxx:1158/em and https://localhost:1158/em
Both give me the generic "Internet Explorer cannot display the webpage" - but if I access from another computer it comes up - so I know everything is working...

Unable to open .chm file from a link in Weblogic 7.0

Unable to open .chm file from a link in weblogic server. But the same
jsp code works in Websphere
Sample Code :

The above link, works well in websphere. help is a folder that
resides in the server. But when i tried to execute the same in
Weblogic, some junk characters appeared . so i tried to direct the
link to Display.jsp and passed the path of the chm file as the
parameter. I cleared teh out buffer using out.clearBuffer() . i set
the content type to application/x-msdownload and also set the header
to content disposition.
Nothing worked .
I also tried another way.. That is the following
I even tried including the mime type
<mime-mapping>
<extension>chm</extension>
<mime-type>application/x-msdownload</mime-type>
</mime-mapping>
in the web.xml file. and still it doesnt work
Nothing Worked . What should i do ? I need immediate help to sort out
this issue. Can anybody help me
- Angel

This could be a Launch Services issue. The following article describes how to manually reset Launch Services — the notes at the bottom of the article also provide information about the side effects of deleting each of the files involved:
Resetting Launch Services
If you prefer using a cache cleaning utility instead of following the manual procedure described in the previous article, take a look at this other article for general troubleshooting and cache-cleaning procedures. Actually, you should also verify/repair the startup disk (not just permissions), as described there:
Resolving Disk, Permission, and Cache Corruption
The most appropriate utility for this particular problem probably is Tiger Cache Cleaner, but you may also want to consider other utilities, such as OnyX, or Cache Out X, which are free. Whatever utility you choose, be sure to read this first:
Side effects of System cache cleaning
As an example, this is how you should proceed with OnyX:
1. Quit all applications.
2. Launch OnyX and enter your administrator password.
3. Go to Maintenance > Reset and check LaunchServices database.
4. Un-check any other pre-checked options.
5. Click the Execute button.
6. Restart the computer.
BTW, if you’re running Mac OS X 10.4 (Tiger), as your profile indicates, it would have been more appropriate to discuss this in the Mail & Address Book - Tiger forum. If the discussion applies to both Mail 1.x and Mail 2.x, it doesn’t really matter, but it’s difficult to know that in advance.

My apple id is not working in imessage or facetime. I tried to rest password still unable to open any. Though i can download stuff from istore.Only facetime and imessage not working. Please suggest.

I am using Ipad3 and OS is upgraded. I tried to reset password still unable to open imessage and facetime. I am able to download from istore though. Tried everything i knew. Please suggest!

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Set Up Alert Sounds
http://www.quepublishing.com/articles/article.aspx?p=1873027&seqNum=3
Extra FaceTime IDs
http://tinyurl.com/k683gr4
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Fix Can’t Sign Into FaceTime or iMessage iOS 7
http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457#19087457
How to watch FaceTime calls on the big screen with Apple TV
http://www.imore.com/daily-tip-ios-5-airplay-mirroring-facetime
Send an iMessage as a Text Message Instead with a Quick Tap & Hold
http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
How to Receive SMS Messages on an iPad
http://yourbusiness.azcentral.com/receive-sms-messages-ipad-16776.html
Apps for Texting http://appadvice.com/appguides/show/apps-for-texting
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
 Cheers, Tom

ClamAV 0.94.2 issues - unable to open/parse clamd.conf

Similar Messages

Maybe you are looking for