ClamAV and DNS Failure with Security Update 2010-005

Hey everyone, got a bit of an issue.
I'm running Leopard Server 10.5.8 and I've noticed a very odd issue with the latest security update, (2010-005).
Since the update, whenever ClamAV goes out to check for new definitions and database updates, all of my DNS clients lose connection during the few minutes that it's working. I've verified this by watching the logs as the updates happen. Everything is fine, and the second that ClamAV starts running, DNS fails on all the clients, then starts again after the update process.
Anyone else notice this? And more importantly, how should I go about disabling ClamAV, since I don't run a mail server off this particular server.
Thanks!

The System Info below your post indicates that you are running OS X 10.5.8. The FaceTime Beta requires a minimum of OS X 10.6.4.

Similar Messages

  • HT1338 Hi, I'm trying to load Facetime on my MacBook and it says "You are missing a critical security patch. Please use Software Update to install Security Update 2010-005". I've checked and all my software is updated. What do I do?

    Hi, I'm trying to load Facetime on my MacBook and it says "You are missing a critical security patch. Please use Software Update to install Security Update 2010-005". I've checked and all my software is updated. What do I do?

    First off, iOS 5 will not run on Macs.   You need to give us your Mac OS X on your Mac to determine which security update you need.  Go to Apple menu -> About This Mac.     And then read the link here:
    http://support.apple.com/kb/HT1222

  • VPN broken after 10.6.4 Update / Security Update 2010-005

    I have a MacMini Server that was running 10.6.3 in use as a gateway for the last 3 or 4 months and everything has been working just fine. However, after applying 10.6.4 and Security Update 2010-005 the iChat and VPN services broke.
    I was able to fix the iChat service by using serveradmin in Terminal - Server Admin was showing the correct name of the iChat server, but serveradmin reported a different (incorrect) name. My only guess is that one of the updates somehow changed that setting behind the scenes.
    I have yet to be able to fix the VPN (L2TP) issue, though. I can connect internally (to 10.0.1.1) with no problem. I can connect with via iPhone over 3G no problem. I cannot connect externally from a 10.5.8 or a 10.6.4 client - any attempt always fails with a timeout. The VPN log shows nothing, but the system log shows:
    Sep 24 14:18:33 gateway racoon[90950]: Connecting.
    Sep 24 14:18:33 gateway racoon[90950]: IKE Packet: receive success. (Responder, Main-Mode message 1).
    Sep 24 14:18:33 gateway racoon[90950]: IKE Packet: transmit success. (Responder, Main-Mode message 2).
    Sep 24 14:18:36 gateway racoon[90950]: IKE Packet: transmit success. (Phase1 Retransmit).
    Sep 24 14:19:03: --- last message repeated 8 times ---
    Sep 24 14:19:03 gateway racoon[90950]: IKEv1 Phase1: maximum retransmits. (Phase1 Maximum Retransmits).
    Sep 24 14:19:03 gateway racoon[90950]: Disconnecting. (Connection tried to negotiate for, 29.171451 seconds).
    Sep 24 14:19:03 gateway racoon[90950]: IKE Phase1 Failure-Rate Statistic. (Failure-Rate = 100.000).
    It would seem that the response to the initial handshake is being blocked. However, serveradmin has this to say about ipfilter:
    gateway:/ *******$ sudo serveradmin settings ipfilter|grep VPN
    ipfilter:ipAddressGroupsWithRules:array_id:any:rules:_arrayid:VPN ISAKMP/IKE:action = "allow"
    ipfilter:ipAddressGroupsWithRules:array_id:any:rules:_arrayid:VPN L2TP - Layer-Two Tunneling Protocol:action = "allow"
    ipfilter:ipAddressGroupsWithRules:array_id:any:rules:_arrayid:VPN L2TP\: IKE NAT Traversal:action = "allow"
    ipfilter:ipAddressGroupsWithRules:array_id:any:rules:_arrayid:VPN L2TP\: ISAKMP/IKE:action = "allow"
    ipfilter:ipAddressGroupsWithRules:array_id:any:rules:_arrayid:VPN L2TP\: ESP - Encapsulating Security Payload protocol:action = "allow"
    ipfilter:standardServices:arrayid:VPN PPTP\: GRE - Generic Routing Encapsulation protocol:readOnly = yes
    ipfilter:standardServices:arrayid:VPN PPTP\: GRE - Generic Routing Encapsulation protocol:protocol = "gre"
    ipfilter:standardServices:arrayid:VPN PPTP\: GRE - Generic Routing Encapsulation protocol:name = ""
    ipfilter:standardServices:arrayid:VPN PPTP\: GRE - Generic Routing Encapsulation protocol:dest-port = ""
    ipfilter:standardServices:arrayid:VPN L2TP\: ESP - Encapsulating Security Payload protocol:readOnly = yes
    ipfilter:standardServices:arrayid:VPN L2TP\: ESP - Encapsulating Security Payload protocol:protocol = "esp"
    ipfilter:standardServices:arrayid:VPN L2TP\: ESP - Encapsulating Security Payload protocol:name = ""
    ipfilter:standardServices:arrayid:VPN L2TP\: ESP - Encapsulating Security Payload protocol:dest-port = ""
    ipfilter:standardServices:arrayid:VPN L2TP - Layer-Two Tunneling Protocol:oldDescription = "Layer-Two Tunneling Protocol (L2TP)"
    ipfilter:standardServices:arrayid:VPN L2TP - Layer-Two Tunneling Protocol:protocol = "udp"
    ipfilter:standardServices:arrayid:VPN L2TP - Layer-Two Tunneling Protocol:readOnly = no
    ipfilter:standardServices:arrayid:VPN L2TP - Layer-Two Tunneling Protocol:name = ""
    ipfilter:standardServices:arrayid:VPN L2TP - Layer-Two Tunneling Protocol:dest-port = "1701"
    ipfilter:standardServices:arrayid:VPN PPTP - Point-to-Point Tunneling Protocol:oldDescription = "PPTP VPN"
    ipfilter:standardServices:arrayid:VPN PPTP - Point-to-Point Tunneling Protocol:protocol = "tcp"
    ipfilter:standardServices:arrayid:VPN PPTP - Point-to-Point Tunneling Protocol:readOnly = no
    ipfilter:standardServices:arrayid:VPN PPTP - Point-to-Point Tunneling Protocol:name = ""
    ipfilter:standardServices:arrayid:VPN PPTP - Point-to-Point Tunneling Protocol:dest-port = "1723"
    ipfilter:standardServices:arrayid:VPN L2TP\: ISAKMP/IKE:readOnly = no
    ipfilter:standardServices:arrayid:VPN L2TP\: ISAKMP/IKE:protocol = "udp"
    ipfilter:standardServices:arrayid:VPN L2TP\: ISAKMP/IKE:name = ""
    ipfilter:standardServices:arrayid:VPN L2TP\: ISAKMP/IKE:dest-port = "500"
    ipfilter:standardServices:arrayid:VPN L2TP\: IKE NAT Traversal:readOnly = no
    ipfilter:standardServices:arrayid:VPN L2TP\: IKE NAT Traversal:protocol = "udp"
    ipfilter:standardServices:arrayid:VPN L2TP\: IKE NAT Traversal:name = ""
    ipfilter:standardServices:arrayid:VPN L2TP\: IKE NAT Traversal:dest-port = "4500"
    Which seems to be correct to me.
    As with the iChat problem, everything seems to be correct as reported by Server Admin. I have been hunting for the incorrect setting using serveradmin, but so far everything there seems to be correct as well.
    One last item that I just discovered today, and which is probably a huge hint (and I just don't know how to connect the dots), is that when I stop the VPN service (it's running on the gateway server), the entire office loses it's connection to the internet. Turn VPN back on, and the internet is back.
    I think my server is deeply, deeply disturbed, but I am not ready to wipe it clean and start over again. I sure would appreciate any insights on this one....

    I have a MacMini Server that was running 10.6.3 in use as a gateway for the last 3 or 4 months and everything has been working just fine. However, after applying 10.6.4 and Security Update 2010-005 the iChat and VPN services broke.
    I was able to fix the iChat service by using serveradmin in Terminal - Server Admin was showing the correct name of the iChat server, but serveradmin reported a different (incorrect) name. My only guess is that one of the updates somehow changed that setting behind the scenes.
    I have yet to be able to fix the VPN (L2TP) issue, though. I can connect internally (to 10.0.1.1) with no problem. I can connect with via iPhone over 3G no problem. I cannot connect externally from a 10.5.8 or a 10.6.4 client - any attempt always fails with a timeout. The VPN log shows nothing, but the system log shows:
    Sep 24 14:18:33 gateway racoon[90950]: Connecting.
    Sep 24 14:18:33 gateway racoon[90950]: IKE Packet: receive success. (Responder, Main-Mode message 1).
    Sep 24 14:18:33 gateway racoon[90950]: IKE Packet: transmit success. (Responder, Main-Mode message 2).
    Sep 24 14:18:36 gateway racoon[90950]: IKE Packet: transmit success. (Phase1 Retransmit).
    Sep 24 14:19:03: --- last message repeated 8 times ---
    Sep 24 14:19:03 gateway racoon[90950]: IKEv1 Phase1: maximum retransmits. (Phase1 Maximum Retransmits).
    Sep 24 14:19:03 gateway racoon[90950]: Disconnecting. (Connection tried to negotiate for, 29.171451 seconds).
    Sep 24 14:19:03 gateway racoon[90950]: IKE Phase1 Failure-Rate Statistic. (Failure-Rate = 100.000).
    It would seem that the response to the initial handshake is being blocked. However, serveradmin has this to say about ipfilter:
    gateway:/ *******$ sudo serveradmin settings ipfilter|grep VPN
    ipfilter:ipAddressGroupsWithRules:array_id:any:rules:_arrayid:VPN ISAKMP/IKE:action = "allow"
    ipfilter:ipAddressGroupsWithRules:array_id:any:rules:_arrayid:VPN L2TP - Layer-Two Tunneling Protocol:action = "allow"
    ipfilter:ipAddressGroupsWithRules:array_id:any:rules:_arrayid:VPN L2TP\: IKE NAT Traversal:action = "allow"
    ipfilter:ipAddressGroupsWithRules:array_id:any:rules:_arrayid:VPN L2TP\: ISAKMP/IKE:action = "allow"
    ipfilter:ipAddressGroupsWithRules:array_id:any:rules:_arrayid:VPN L2TP\: ESP - Encapsulating Security Payload protocol:action = "allow"
    ipfilter:standardServices:arrayid:VPN PPTP\: GRE - Generic Routing Encapsulation protocol:readOnly = yes
    ipfilter:standardServices:arrayid:VPN PPTP\: GRE - Generic Routing Encapsulation protocol:protocol = "gre"
    ipfilter:standardServices:arrayid:VPN PPTP\: GRE - Generic Routing Encapsulation protocol:name = ""
    ipfilter:standardServices:arrayid:VPN PPTP\: GRE - Generic Routing Encapsulation protocol:dest-port = ""
    ipfilter:standardServices:arrayid:VPN L2TP\: ESP - Encapsulating Security Payload protocol:readOnly = yes
    ipfilter:standardServices:arrayid:VPN L2TP\: ESP - Encapsulating Security Payload protocol:protocol = "esp"
    ipfilter:standardServices:arrayid:VPN L2TP\: ESP - Encapsulating Security Payload protocol:name = ""
    ipfilter:standardServices:arrayid:VPN L2TP\: ESP - Encapsulating Security Payload protocol:dest-port = ""
    ipfilter:standardServices:arrayid:VPN L2TP - Layer-Two Tunneling Protocol:oldDescription = "Layer-Two Tunneling Protocol (L2TP)"
    ipfilter:standardServices:arrayid:VPN L2TP - Layer-Two Tunneling Protocol:protocol = "udp"
    ipfilter:standardServices:arrayid:VPN L2TP - Layer-Two Tunneling Protocol:readOnly = no
    ipfilter:standardServices:arrayid:VPN L2TP - Layer-Two Tunneling Protocol:name = ""
    ipfilter:standardServices:arrayid:VPN L2TP - Layer-Two Tunneling Protocol:dest-port = "1701"
    ipfilter:standardServices:arrayid:VPN PPTP - Point-to-Point Tunneling Protocol:oldDescription = "PPTP VPN"
    ipfilter:standardServices:arrayid:VPN PPTP - Point-to-Point Tunneling Protocol:protocol = "tcp"
    ipfilter:standardServices:arrayid:VPN PPTP - Point-to-Point Tunneling Protocol:readOnly = no
    ipfilter:standardServices:arrayid:VPN PPTP - Point-to-Point Tunneling Protocol:name = ""
    ipfilter:standardServices:arrayid:VPN PPTP - Point-to-Point Tunneling Protocol:dest-port = "1723"
    ipfilter:standardServices:arrayid:VPN L2TP\: ISAKMP/IKE:readOnly = no
    ipfilter:standardServices:arrayid:VPN L2TP\: ISAKMP/IKE:protocol = "udp"
    ipfilter:standardServices:arrayid:VPN L2TP\: ISAKMP/IKE:name = ""
    ipfilter:standardServices:arrayid:VPN L2TP\: ISAKMP/IKE:dest-port = "500"
    ipfilter:standardServices:arrayid:VPN L2TP\: IKE NAT Traversal:readOnly = no
    ipfilter:standardServices:arrayid:VPN L2TP\: IKE NAT Traversal:protocol = "udp"
    ipfilter:standardServices:arrayid:VPN L2TP\: IKE NAT Traversal:name = ""
    ipfilter:standardServices:arrayid:VPN L2TP\: IKE NAT Traversal:dest-port = "4500"
    Which seems to be correct to me.
    As with the iChat problem, everything seems to be correct as reported by Server Admin. I have been hunting for the incorrect setting using serveradmin, but so far everything there seems to be correct as well.
    One last item that I just discovered today, and which is probably a huge hint (and I just don't know how to connect the dots), is that when I stop the VPN service (it's running on the gateway server), the entire office loses it's connection to the internet. Turn VPN back on, and the internet is back.
    I think my server is deeply, deeply disturbed, but I am not ready to wipe it clean and start over again. I sure would appreciate any insights on this one....

  • Security Update 2010-005 for Facetime

    Hi,
    I have downloaded Face-time Beta to be installed on my iMac OS 10.5.8.
    During Installation i get a message that I need to install first "Security Update 2010-005 using software update"
    My software update shows no update required. Nevertheless, I have downloaded all 5 security updates and installed them one after the other, with no problems.
    Still i get the same message that Security Update 2010-005 needed when I try to install the Facetime.
    Can anybody knows a way out of this loop ? or how do I "Inform" the software update that the Security update 2010-005 is already installed ?
    thanks,

    Yes, you'd need to buy it - it's available widely for $29 (Apple store or resellers); you can then update to 10.6.4 - use the combo updater available here:
    http://support.apple.com/kb/DL1048
    (updates for an OS are available for free, but you do have to pay for the initial upgrade to another OS).
    Edit: And when you're doing the updates to 10.6.4, don't forget to repair permissions after each update.
    Message was edited by: Barbara Daniels1

  • Security Update 2010-005 won't install.

    I have an iMac4,1 with 2gig of RAM and OSX 10.6.5 and when I try to install Security Update 2005-005 I get a message that my volume does not meet requirements for this update. I know my OS is up to date. Could it be that my hardware is too dated? Do I need a newer model?

    BWS3RD wrote:
    Was trying to install Facetime which asks for Security Update 2010-005.
    Welcome to Discussions, BWS3RD
    The Security Update 2010-005 message is common for users who try to install FaceTime on a Leopard (10.5.x) Mac. The Mac FaceTime beta will not run in Leopard.
    Your posted system info shows that you use Mac OS X (10.6.5), but perhaps you are trying to install FaceTime on a Mac that does not meet FaceTime system requirements?
    The FaceTime product page http://www.apple.com/mac/facetime/ shows system requirements:
      "*Requires Mac OS X v10.6.4 Snow Leopard or later.*"
    I always suggest using the latest Snow Leopard version.
    If your posted Mac OS X (10.6.5) is correct, use the following method to apply the 10.6.5 Combo before attempting another FaceTime reinstall:
      • Backup your Mac and turn off Time Machine
      • Disconnect peripherals and restart Mac
      • Use Disk Utility to repair permissions
      • Download and install http://support.apple.com/kb/DL1324
      • Repair permissions again immediately following the restart that finishes the update.
      • Download and install a fresh copy of FaceTime
     (• Turn Time Machine on again when you are satisfied that everything works.)
    Message was edited by: EZ Jim
    Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.5); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.5)
    LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod4touch4.2.1

  • Security Update 2010-005

    I noticed that I updated to the new Security Update 2010-006 BEFORE updating the prior one sent
    which is "2010-005" ( 005 versus 006 ), should I still go ahead and update the previous or is it
    pointless to do so. I worry about causing problems or if I need to go back somehow and redo both in order. Can someone please let me know! Thanks

    Strange I just noticed on the Downloads page http://support.apple.com/en_US/downloads
    that it shows
    *"Security Update 2010-006 (Snow Leopard)"*
    *"Security Update 2010-005 is recommended for all users and improves the security of Mac OS X."*
    But when you click on that link the 005 doesn't show up I guess it's an typo error but this is what
    makes things confusing when trying to update as I didn't notice it before but then noticed it tonight.
    I actually don't even see it in the downloads page anymore I have to actually click on the link from the Software Updater menu only. All I see is *Snow Leopard (Client) Security Update 2010-005*
    the "client" has me boggled are there 3 different Snow leopards (Server, Client, Server-Client)?
    This is cumbersome. I wonder if updating is even really necessary as each update takes more space, perhaps it's their way of making your computer slow so that your forced to keep buying more stuff from them etc.
    Message was edited by: Antone76
    Message was edited by: Antone76

  • Security update 2010-005 unable to install

    hi, I Just brought new Macbook pro.
    when i try to install facetime, prompt me to install the security update 2010-005, i downloaded and when i try to install this security update ask me to chose the installation destination, when i chose the Macintosh HD its prompt like this "Security U[date 2010-005) can't be installed on this disk. this volume does not meet the requirements for this update."
    please some one help me whats goes wrong, i m new to Macs

    Run Software Update, install everything that shows up, repair permissions, and restart. Once you do that, you shouldn't have any problem installing FaceTime. Then, peruse these:
    Switching from Windows to Mac OS X,
    Basic Tutorials on using a Mac,
    Mac 101: Mac Essentials,
    Mac OS X keyboard shortcuts,
    Anatomy of a Mac,
    MacTips, and
    Switching to the Mac: The Missing Manual, Snow Leopard Edition.
    Additionally, *Texas Mac Man* recommends:
    Quick Assist,
    Welcome to the Switch To A Mac Guides,
    Take Control E-books, and
    A guide for switching to a Mac.

  • Security Update 2010-005 Squirrelmail 1.4.20 timezones.cfg

    Was an update to Squirrelmail 1.4.20 included in the Security Update 2010-005?
    Is is just me or is everyone missing /usr/share/squirrelmail/include/timezones.cfg after this update?
    This causes an error when trying to access the Options > Personal Information.

    I manually updated to 1.4.20
    So *Security Update 2010-005* didn't contain an update to SquirrelMail but managed to break my install of SquirrelMail 1.4.20?
    I always use a sym-link so that automatic updates don't break my manual updates. But there must have been a script in the Security Update that erased the timezones.cfg file. Even if there was a SquirrelMail update included, why would it erase the timezones.cfg file?

  • HTTPS connections timeout with Security Update 2010-001

    I recently installed Security Update 2010-001 onto Snow Leopard and have difficulty accessing certain web sites from my browser (I have tried with both Safari and Firefox and they have the same problem). The issue in common with the problem sites is that they use akamai mirror servers to deliver their content over HTTPS connections. I can see from the Activity window that the redirected HTTPS connections to the akamai sites just hang and eventually timeout. This is new behaviour since installing the security patch and I was wondering if the Open SLL update in the security patch may have caused these connections to hang? Anyone have any idea (or where I could find out?)
    P

    I recently installed Security Update 2010-001 onto Snow Leopard and have difficulty accessing certain web sites from my browser (I have tried with both Safari and Firefox and they have the same problem). The issue in common with the problem sites is that they use akamai mirror servers to deliver their content over HTTPS connections. I can see from the Activity window that the redirected HTTPS connections to the akamai sites just hang and eventually timeout. This is new behaviour since installing the security patch and I was wondering if the Open SLL update in the security patch may have caused these connections to hang? Anyone have any idea (or where I could find out?)
    P

  • Bootcamp issue with Security Update 2014-005.

    My MacBook Pro with Bootcamp won't boot in Windows 8.1 mode after the recent Security Update 2014-005. Any suggestions on how to diagnose and repair the startup.
    I am using a MacBook Pro (13 inch, Mid 2012) with a 2.5 GHz Intel Core i5, 4 GB 1600 MHz DDR3 with a Macintosh HD.

    Keiths-MacBook-Pro:~ $ diskutil list
    /dev/disk0
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *500.1 GB   disk0
       1:                        EFI EFI                     209.7 MB   disk0s1
       2:                  Apple_HFS Macintosh HD            249.2 GB   disk0s2
       3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
       4:       Microsoft Basic Data BOOTCAMP                250.0 GB   disk0s4
    Keiths-MacBook-Pro:~ $ diskutil cs list
    No CoreStorage logical volume groups found
    Keiths-MacBook-Pro:~ $ sudo gpt -vv -r show /dev/disk0
    Password:
    gpt show: /dev/disk0: mediasize=500107862016; sectorsize=512; blocks=976773168
    gpt show: /dev/disk0: Suspicious MBR at sector 0
    gpt show: /dev/disk0: Pri GPT at sector 1
    gpt show: /dev/disk0: Sec GPT at sector 976773167
          start       size  index  contents
              0          1         MBR
              1          1         Pri GPT header
              2         32         Pri GPT table
             34          6        
             40     409600      1  GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
         409640  486812704      2  GPT part - 48465300-0000-11AA-AA11-00306543ECAC
      487222344    1269536      3  GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
      488491880       1176        
      488493056  488280064      4  GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
      976773120         15        
      976773135         32         Sec GPT table
      976773167          1         Sec GPT header

  • After updating with Security Update 2010-001, Quicken will not auto update.  Auto update function in Preferences are also inop.  Numerous posts in Macbook discussions about similar problems with other apps.

    Installed Security Update 2012-001.  Now Quicken will not auto save and the auto save function in Preferences cannot be changed. There are numerous similar comments in the Macbook discussions about other apps.   Come on, Apple, we need some help out here!

    Howdy,
    Apparently some are reporting that this causes the older PowerPC (PPC) applications that are supported in 10.6 via 'Rosetta' to crash upon attempting to open/save/print using any dialog box, or fail in other similar ways such as simply not printing or quitting, or freezing/hanging/crashing of the application.
    I have read of some companies that have indeed submitted proper bug reports to Apple, but that is not a guarantee of a bug-fix being issued.
    You might wish to read:
    http://www.macintouch.com/readerreports/snowleopard/index.html#d02feb2012
    If you are unsure if you are still using PowerPC apps, if the application is currently running, look under the 'Activity Monitior' (in Applications -> Utilities), or alternatively you could check in the System Profiler, Applications. Check the column "Type".
    Here is a fairly simple way you can restore you system and restore you applications functionality again, if you don't have a recent clone or good Time Machine backup that you can restore from. If you do, restore from your backup prior to having installed the Security Update 2012-001.
    Time Machine restore: http://support.apple.com/kb/ht1427
    If you are restoring a backup made by a Mac to the same Mac
    With your backup drive connected, start up your Mac from the Lion recovery partition (Command-R at startup) or Mac OS X v10.6 installation disc. Then use the "Restore From Time Machine Backup" utility. Select the backup prior to your issues, and it will be restored back to the state it was in at that time.
    If you can't easily restore from a backup, you can instead do the following:
    - You first start by reinstalling your OS X 10.6.x, this will preserve all your user data, your applications, no worries there.
    - Then install the Mac OS X 10.6.8 Update Combo v1.1 (links provided below)
    - Make sure you're printers are showing up correctly in your system preferences, if not, re-add the printers
    - Then finally, run the Apple Software Update (by pulling down the Apple Menu), and install any and all remaining updates, except do not then re-install the Security Update 2012-001. It is possible that you may have to reboot after installing some of the updates, and you may even need to run it a 2nd time to make sure that you've got all updates, except NOT the Security Update 2012-001.
    Links for 10.6.8 Update Combo v1.1:
    http://support.apple.com/kb/DL1399
    or the link to directly download this 1.09GB combo updater:
    http://support.apple.com/downloads/DL1399/en_US/MacOSXUpdCombo10.6.8.dmg
    Cheers,
    Daniel Feldman
    =======================
      MacMind
      Certified Member of the
      Apple Consultants Network
      Apple Certified (ACHDS)
      E-mail:  [email protected] 
      Phone:   1-408-454-6649
      URL : www.MacMind.com
    =======================

  • Security Update 2010-005 and WiFi

    After installing the latest security update, I am unable to connect to by my WiFi (LinkSys). I enter the password (which I verified using my MacBook G4 which runs 10.5 and did not receive the update), but the password is not accepted.

    sig wrote:
    Try putting a $ sign in front of the password.
    You mean we have to PAY for our own WiFi now???
    But seriously, why this unix(?) character.
    -mj

  • PHP/MySQL issue after security update 2010-005

    Hello,
    I run Apache/PHP/MySQL on my MBP for testing Web sites.
    After the 2010-005 security update I can't connect to my databases anymore.
    I don't know how to fix this, I even don't know where to start looking.
    Ideas, anyone?

    coloma wrote:
    etresoft, thanks for sharing this ... I decided to go with the TriangleJuice suggestion instead for two reasons ... first is that I wasn't sure where to find this launchd file.
    There is nothing wrong with TriangleJuice's suggestion. My only issue with creating a php.ini file is that now I have to worry about all those other settings in the ini file. If something else in PHP breaks, I have to figure out if I am the one who broke it.
    Apple ships MySQL with MacOS X Server. They probably adjusted the PHP settings to match how they have MySQL setup in MacOS X Server.
    For MySQL's, no, Sun's - drat! no, Oracle's part, they still haven't acknowledged the fact that Apple has shipped MacOS X 10.4. MySQL still ships with a Startup Item. If you don't know where the launchd file is, it is because you don't have one. You probably have a MySQL entry in /Library/StartupItems or maybe /System/Library/StartupItems. Startup Items were deprecated in 10.4. Oracle should be creating a file named com.mysql.mysqld.plist in /Library/LaunchDaemons.
    Here is what mine looks like now:
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>KeepAlive</key>
    <true/>
    <key>Label</key>
    <string>com.mysql.mysqld</string>
    <key>ProgramArguments</key>
    <array>
    <string>/usr/local/mysql/bin/mysqld</string>
    <string>--socket=/var/mysql/mysql.sock</string>
    <string>--basedir=/usr/local/mysql</string>
    <string>--datadir=/usr/local/mysql/data</string>
    <string>--user=mysql</string>
    <string>--log-error=/usr/local/mysql/data/Pele.local.err</string>
    <string>--pid-file=/usr/local/mysql/data/Pele.local.pid</string>
    </array>
    <key>RunAtLoad</key>
    <true/>
    </dict>
    </plist>
    I also don't have a /var/mysql directory and wasn't sure whether I should just create one or if this meant my configuration was different. If you feel like explaining any of this, I'd be curious to know.
    You have to create one. Such a directory probably already exists on MacOS X Server. Just make sure it is owned by mysql.
    sudo mkdir /var/mysql
    sudo chown _mysql:staff /var/mysql
    sudo chmod 0755 /var/mysql
    [jdaniel@Pele:516] /var $ ls -al /private/var | grep mysql
    drwxr-xr-x 3 _mysql staff 102 Aug 26 20:03 mysql
    Of course, /var is a symbolic link to /private/var. Long story there.

  • Problems with Security Update 2009-005

    I attempted to install this security update on my iBook G4 but got an error message towards the end of the process stating that it had not fully installed. Since then my dock has disappeared so I can only access applications through Go in Finder, the computer wont shut down or restart, Safari opens with an error message -600, it does not recognise my camera so I cant download photos and About this Mac doesnt work. How can I fix this? Can anyone help? Thanks.

    Welcome to the Apple Discussions (under less than auspicious circumstances, alas). To save me an incredible amount of typing I will refer you to a previous post on this topic: [http://discussions.apple.com/message.jspa?messageID=10206386#10206386]. You should also browse the last few day's topics in this forum for similar issues. As you will see from my post, there's a range of possible cures from simply booting in Safe Mode and rebooting normally, to having to re-install your operating system.

  • Secure Empty Trash Problem After Installing Security Update 2010-005

    Some items in trash were locked, selected option to remove all items and nothing was deleted. Rebooted twice, no change. Unsecure empty trash works fine. Any ideas?

    Hello, i have the same problem. After security update the Mailprogram is polling my imap accounts (which requires SSL) endless. My workarround was to install Thunderbird. TB did the job. Any solution?
    thh001

Maybe you are looking for

  • Change Valuation class

    We have a need to change the valuation class of the material master with tcode MM02, and the material has a lot of open Purchase Orders and Sales orders, and many batches created for this material.  This material use by many countries, and we cannot

  • Vedor not cleared in f-44

    Hi, vendor not appearing in F-44 even though it is there in FBL1N, but i  have payement proposal ran and completed, i cannot able the delete the payment proposal as it is paid. what is other way to get rid of this issue. regards, Prakash

  • How can i block the adversing in my macbook

    Ich möchte Webung von mein Mackoob Blokieren

  • How to downgrade from Mac OS X Leopard to Tiger

    I have Mac OS X 10.4.0 CDs (Retail Discs), but when I try to install it says that "Mac OS X cannot be installed on this machine", even though I meet all the requirements. I suppose that this is because versions prior to 10.4.4 do not support Intel pr

  • Windows in macbook pro

    Hello guys i´m new in mac community is my first mac, i have a macbook pro 2.4ghz with tiger os, i want put windows in my macbook pro beause business stuffs, what must do to put windows in my mac. I want have tiger os, and windows xp in macbook what i