Clamshell Cannot Connect to Cable Internet

I have an iBook Clamshell, PowerPC 750, 300MHz, 512mb, 288mb memory, OSX 10.3.5 and for the life of me I cannot get it connected to my cable internet. I did once before several months back, but cannot any longer. My router and modem are all working as they should. When I go through my network settings, my Built-In Ethernet is showing up with correct IP address and router address. I'm not sure if I'm missing something or what. Any thoughts or ideas?

Have you verified that the ethernet port has no bent pins ?
Maybe you should use a different lan cable and check that it is a regular lan cable and not a Cross-over cable.

Similar Messages

Msi z87 mpower cannot connect to the internet by cable

as the title says i cannot connect to the internet by the ethernet cable the wi-fi is great but no cable all the drivers are installed off both discs, some please help i really don't won't to take my new build apart again
ive tryed all these
connect the ethernet cable (disconnect wireless)
go to start typ CMD you will get command prompt.
typ "ipconfig /all" and look which ip adress you get from your modem/router, if its a 169 ip adress (apipi), then there could be something wrong with the cable. you need to get a 192 ip adress.
if you dont see a Ethernet connection at all, then go to device manager, and look if there is some unknown hardware over there. with exclamation mark. or if there is a network adapter with exclamation mark, then take the CD from the mainboard, and install the Ethernet driver.
If there is a Network adapter in Device manager, with red cross, then it means that its disabled, you need to enable it.
i have this one
if you dont see a Ethernet connection at all, then go to device manager, and look if there is some unknown hardware over there. with exclamation mark. or if there is a network adapter with exclamation mark, then take the CD from the mainboard, and install the Ethernet driver.
but with drivers of the both discs and msi live updater still nothing.

Did you already download and install the Killer driver from the MSI download page?
The drivers on the CD seem a little immature imo. The commandcenter kept crashing for me, Killer didn't work properly too etc.
Check all the drivers on the download page and if there is a newer one, install those instead of the CD one.
Hope this helps

My Macbook Pro cannot connect to the internet using an ethernet cord.

My Macbook Pro cannot connect to the internet using an ethernet cord. It was working fine for weeks, then all of a sudden just stopped. What could the problem be?

Hi bean07670,
If you are having an issue with the Ethernet connection on your MacBook Pro, you may find the following article helpful:
Mac OS X: Troubleshooting a cable modem, DSL, or LAN Internet connection
http://support.apple.com/kb/TS1317
Regards,
- Brenden

"Router (WRH54G) cannot connect to the internet."

My router cannot connect to the internet. I get this message everytime I configure the router using the CD. I connected the internet cable to the internet port,connected the ethernet cable to one of the four ports to the LAN and the power cable to power source to the power slot of the router. Can you please help me on this?

castor wrote:
Well tell me who provides you with the Internet Service & accrodingly i will give you the information.
Smartbro Communications in the Philippines.

I cannot connect to the Internet after installation of Windows Vista Ultimate edition.

I cannot connect to the Internet after installation of Windows Vista Ultimate edition. For some odd reason, it seems my ethernet has not yet been installed to my operating system and I do not know how to do that even with the internet, I have the LAN cable hooked up to my computer but I do not know exactly what to do about it. Is there some sort of driver I need to install, or what? How do I do that without the internet?
This operating system is on a separate partition to my other operating system that is connected to internet already (Windows Vista Premium) that I do not wish to use anymore because of it's corruption. I tell you this because you may know a way of finding the driver files on my previous operating system that I may be able to transfer to the other.

In order to avoid board clutter, we ask that you post your topic on one board only.
Please look ---> HERE for replies to your topic. Thank you.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer that solved your issue as the accepted solution.

Wifi is working but cannot connect to the internet

I am using windows 8.1
My wifi is working - my iphone and ipad can use it and my PC is connected to my broadband but I cannot connect to the internet. I have turned everything off and on a number of times.
I am totally stuck as to how to fix this.

Presumably you are connecting by Ethernet. Has this just started to happen or have you never been able to connect?
Have you tried changing the cable, is it plugged in correctly, have you tried plugging it into different ports on the homehub?
Have you checked that the computers firewall is not set to block connections, see link
http://windows.microsoft.com/en-gb/windows-8/windows-firewall-from-start-to-finish
If you are not using the Windows fiewall have you checked to see if your antivirus/firewall is blocking connection?

E3200 Cannot Connect To The Internet

I have purchased a new E3200 to replace my old Linksys router. It locates my computers and sets up a network, but cannot connect to the internet via my Comcast cable modem. I have read on this forum about Mac address issues, but it has located the Mac address. The internet IP address is all zeros, and releasing and renewing the IP does nothing. Help!
Solved!
Go to Solution.

The results with the E32000 and no internet access:
Windows IP Configuration
Host Name . . . . . . . . . . . . : CHILDREN-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) 82566DC-2 Gigabit Network Connection
Physical Address. . . . . . . . . : 00-1B-FC-7F-64-49
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::80a6:2a71:8395:9bb7%10(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.101(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Saturday, May 14, 2011 12:26:53 PM
Lease Expires . . . . . . . . . . : Sunday, May 15, 2011 8:01:17 PM
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DHCPv6 IAID . . . . . . . . . . . : 201333756
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-11-20-F8-58-00-1B-FC-7F-64-49
DNS Servers . . . . . . . . . . . : 192.168.1.1
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter Teredo Tunneling Pseudo-Interface:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{8B8A9460-51EA-4547-B11D-E22D69E1C85D}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
The results with my old router and an internet connection:
Windows IP Configuration
Host Name . . . . . . . . . . . . : CHILDREN-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : hsd1.fl.comcast.net.
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : hsd1.fl.comcast.net.
Description . . . . . . . . . . . : Intel(R) 82566DC-2 Gigabit Network Connection
Physical Address. . . . . . . . . : 00-1B-FC-7F-64-49
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::80a6:2a71:8395:9bb7%10(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.101(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Saturday, May 14, 2011 12:26:53 PM
Lease Expires . . . . . . . . . . : Sunday, May 15, 2011 8:03:23 PM
Default Gateway . . . . . . . . . : fe80::2c87:e9a2:19cd:b607%10
192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DHCPv6 IAID . . . . . . . . . . . : 201333756
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-11-20-F8-58-00-1B-FC-7F-64-49
DNS Servers . . . . . . . . . . . : 208.67.222.222
208.67.220.220
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter Teredo Tunneling Pseudo-Interface:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2001:0:4137:9e76:860:22d3:bc41:991(Preferred)
Link-local IPv6 Address . . . . . : fe80::860:22d3:bc41:991%12(Preferred)
Default Gateway . . . . . . . . . : ::
NetBIOS over Tcpip. . . . . . . . : Disabled
Tunnel adapter isatap.hsd1.fl.comcast.net.:
Connection-specific DNS Suffix . : hsd1.fl.comcast.net.
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::5efe:192.168.1.101%14(Preferred)
Default Gateway . . . . . . . . . :
DNS Servers . . . . . . . . . . . : 208.67.222.222
208.67.220.220
NetBIOS over Tcpip. . . . . . . . : Disabled

Just bought MacBook Pro, cannot connect to the Internet at home. I have wifi at home and my iPad and cell phone can connect to the wifi

Just bought MacBook Pro, cannot connect to the Internet at home. I have wifi at home and my iPad and cell phone can connect to the wifi

*** When you post for help, please state which OS X is installed.
If you aren't sure, click About this Mac from your Apple menu 
Troubleshooting advice can depend on that information.

I am trying to connect to my friend's wifi, i have a very strong signal indicated on my ipad, but cannot connect to the internet. Yesterday i connected without any problem, can anybody tell me why i cannot connect today?

i am trying to connect to my friend's wifi, i have a very strong signal indicated on my ipad, but cannot connect to the internet. Yesterday i connected without any problem, can anybody tell me why i cannot connect today?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Cannot connect via cable on Windows XP home SP2

Good Afternoon,
Maybe you can assist me here.
I cannot connect via cable my N91 (4 gb hdd) to Windows XP Home SP2. I can however connect via cable to my work computer which has the OS Windows XP Pro sp2.
In both cases both OS's are up to date, I have updated the phone OS to v2.10.013 RM-43. I am using the most up to date drivers that is available on nokia.com as well as the current ed of PC Suite (6.82.22.0)
The following is the steps I followed in both cases starting with XP Pro
1. Installed Drivers
2. Installed PC Suite
3. When prompted by PC Suite connected Phone via cable to Computer, further install steps were required. No reboot required. PC Suite then picked up phone
XP Home
Followed steps 1 + 2 in the same order
3. Connected N91 to XP Home computer, after driver install activity rebooted computer as requested. Disconnected N91 On reboot to desktop, in PC Suite I clicked on Get connected. Select Cable connection when prompted attached cable to computer and then to phone, on the phone select PC Suite. .
At this point I get the hour glass and nothing happens, Next is ghosted. It has been like this for 20 mins.
I have uninstalled both the drivers and the software. For some reason the updater can connect to the phone.
Can you advise on what I can do.

Hi
Sounds lik ethe PC is having issues seeing it. Try this
/discussions/board/message?board.id=pcsuite&message.id=11480
Try this first:
1. Go to Windows' Control Panel and open "Add or Remove Programs" application.
3. Select "PC Connectivity Solution", click "Change" and then "Repair".
4. After Repair, restart PC
music

How to restart base station from airport utility? I used to be able to do it remotely I currently use a Mac Pro 10.8.4 and have a time machine for wireless 6.3 (630.34). Sometimes I cannot connect to the internet and use network preferences to diagnose t

How to restart base station from airport utility? I used to be able to do it remotely
I currently use a Mac Pro 10.8.4 and have a time machine for wireless 6.3 (630.34). Sometimes I cannot connect to the internet and use network preferences to diagnose the issue. This results in being told to restart the wireless. The airport utility includes the drop down option of restarting but is not clickable so I can't choose it.
With my prior macbook and same time capsule, etc if i had problems connecting to the internet I would run network diagnostics to help out. This included clicking on the airport utility ---> base station --> restart. This worked most of the time.
Bottom line, is there something I am missing in not being able to restart the wi-fi remotely? ]
Thanks in advance

You are likely forgetting a step.
Open AirPort Utility
Click on the Time Capsule icon
Click Edit in the small window that appears
Now click the Base Station menu.....top of the screen....not the Base Station "tab" in the center of the screen
Click Restart

Cannot Connect to the Internet ?

So I am a new iPad user
very new 3 weeks
It started this morning when I downloaded updates to some of my apps - I then sync'd it with my itunes on my windows vista pc...then i noticed that the iPad screen looked really heavily pixelated in some of the apps, that weren't normally pixelly
I tried restoring my settings on the iPad only, this did not delete my apps or data
then it asked me for my wifi password again, which I put in
I then tried to access the internet on safari, and through various other apps, I get the error message, "cannot connect to the internet"
I tried syncing it again this evening, and still nothing
I am not sure what to do....

Have your:
- Reset your iPad:
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Reset network settings:
Settings>General>Reset Network Settings
- Powering off and then back on your iPad.
- The troubleshooting here:
http://support.apple.com/kb/TS3237

My iPad cannot connect to my internet. the internet is working but not with my ipad.

my iPad cannot connect to my internet. the internet is working but not with my ipad.

Call your ISP (Internet Service Provider) and explain them your issue, it could range from having your router configured incorrectly to having a wiring issue. Personally, I have Comcast and they are great, no issues, and awesome customer service.
Hope you get up and running ASAP

I have a Power PC G4 which is running on OSX 10.5.8, it has the AirPort utility but cannot connect to the internet as my iMac can, I think I might need an AirPort Card? Is that the case or do I need something different to connect to a wireless modem?

I have a Power PC G4 which is running on OSX 10.5.8, it has the AirPort utility but cannot connect to the internet as my iMac can, I think I might need an AirPort Card? Is that the case or do I need something different to connect to a wireless modem?

Welcome!
Only one variant of the PowerMac G4 could use the faster Airport Extreme Card. The rest used the original Airport card that is pretty slow.
To get fast wireless without buying more than one thing, consider this:
http://eshop.macsales.com/item/Edimax/EW7722IN/
It goes in an available PCI slot
There are USB solutions also. However, all PowerMac G4 towers had only slower USB 1.1 ports, so any USB wireless adaptor can only run at about wireless 'B" speeds (slow) unless you also install a PCI USB 2.0 adaptor card. Doing that would allow a USB wireless adaptor to run at its maximum rated speed. These items working together would accomplish that:
USB wireless "dongle:"
Newer Technology MAXPower 802.11n/g/b USB Adapter + Plug and play direct or with extension cradle
USB PCI adaptor:
http://eshop.macsales.com/Search/Search.cfm?Ntk=Primary&Ns=P_Popularity%7c1&Ne=5 000&N=7069&Ntt=USB+PCI
Each approach has its advantages. The PCI wireless card is a one-piece solution that takes up no desk space. The USB2 card+USB2 Dongle gives you more fast ports for transferring date from other external USB devices (primarily cameras and external hard drives) at hugely faster rates than can the original ports. I have a USB 2 PCI card in my G4 tower strictly for transferring images from my digital SLR camera in a timely manner.

TS2756 iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???

iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???
as i said i have two iphone 4S,,,,,
1st one --- has os 5.1
2nd one has os 6.0
i tried 2nd one with carrier reliance gsm nd it works with that personal hotspot setting using USB...
but i want to connect the first 4S with carrier TATA DOCOMO GSM but its not working with the same USB feature????
plz reply asap...!!!
thnxxx in advance!!!

If not this:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem.
Also heating sometimes works. See:
Why can't I select my wifi settings?
A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar
Then:
Does the iOS device connect to other networks? See other networks? If yes that tends to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Clamshell Cannot Connect to Cable Internet

Similar Messages

Maybe you are looking for