Clarification of Max 2xCPUs Caveat for OBISE1 for Multi-Core Processors

Hi all,
I hope this post finds you all well.
I'm just hoping for clarification on the Oracle Business Intelligence Standard Edition One caveat that it can use a maximum of 2 CPUs. Can someone please confirm how this effects multi-core processors?
For example, if I have a machine with 2 x quad-core processor, is this classified as 2 CPUs?
Kind Regards,
Gary.

It's not so much how an application "recognizes" multi-cores but rather how multi-threaded is the application. For example, if I import (or export) 500 images can I continue reviewing in Lr's Library module? The answer, of course, is yes.
Whether a single quad or dual qauds make a difference is entirely dependent on your processing.
Here's some information on hardware requirements for Photoshop: http://www.adobepress.com/articles/article.asp?p=1247538&seqNum=2

Similar Messages

What are the speeds of singe/multi core processor for iPhone 6

i have an iPhone 6 and have just run Geekbench 3 test for the processors and got:
SIngle Core 1164
Multi Core 2049
Geekbench give an average score of:
Single Core 1607
Multi Core 2831
The scores for my phone seem to be quite low in comparison to Geekbench results.
I this something I should be concerned with?

No, you don't have to be concerned. Every bench test will give you different results, and In the end it's a phone and not a high-end computer like the Mac Pro to do your video editing.

VISTA Support for Multiple Dual Quad Core Processors

Sorry if I missed this in my search.
Does Windows Vista Home Basic support dual quad core processors?
Windows Help & Support:
Under System, you can view the processor type and speed, as well as the number of processors installed, if your computer uses multiple processors.
Yet I see no mention of multiple processors there -- what am I missing?

Hi -g,
all Windows Home versions (XP and Vista) only support one physical prcossor with multiple Cores.
Windows Professional versions (XP Professional and Vista Business+Ultimate) support two physical processor with multiple Cores each.
Regards
Stefan

Analysis for Office support multi thread?

Does Analysis for Office support multi thread/core? If so, what verison? I tried searching around this site as well as note 1466118 - Hardware & Software requirements for Analysis, edition for MS Office but was unable to find an answer.
I am on an Intel dual cpu with hyper threading turned on so it essentially looks like 4 cores. When I execute an Analysis View, I rarely see the EXCEL.EXE process go above 25% CPU utilization. I have plenty of RAM and hard drive space.
64bit Windows 7
32bit Office 2010
AAO 1.3.5.2288
Thanks

I found the following info at:
Excel 2010 Performance: Performance and Limit Improvements
Large Data Sets and 64-bit Excel
The 64-bit version of Excel 2010 is not constrained to 2 GB of RAM like 32-bit applications. Therefore, 64-bit Excel 2010 enables users to create much larger workbooks. 64-bit Windows enables a larger addressable memory capacity, and 64-bit Excel is designed to take advantage of that capacity. For example, users are able to fill more of the grid with data than was possible in previous versions of Excel. As more RAM is added to the computer, Excel uses that additional memory, allows larger and larger workbooks, and scales with the amount of RAM available.
In addition, because 64-bit Excel enables larger data sets, both 32-bit and 64-bit Excel 2010 introduce improvements to common large data set tasks such as entering and filling down data, sorting, filtering, and copying and pasting data. Memory usage is also optimized to be more efficient, in both the 32-bit and 64-bit versions of Excel.
Multi-Core Processing
Additional investments were made to take advantage of multi-core processors and increase performance for routine tasks. Starting in Excel 2010, the following features use multi-core processors: saving a file, opening a file, refreshing a PivotTable (for external data sources, except OLAP and SharePoint), sorting a cell table, sorting a PivotTable, and auto-sizing a column.
For operations that involve reading and loading or writing data, such as opening a file, saving a file or refreshing data, splitting the operation into two processes increases performance speed. The first process gets the data, and the second process loads the data into the appropriate structure in memory or writes the data to a file. In this way, as soon as the first process beings reading a portion of data, the second process can immediately start loading or writing that data, while the first process continues to read the next portion of data. Previously, the first process had to finish reading all the data in a certain section before the second process could load that section of the data into memory or write the data to a file.

Quad-Core Processor useful for Lightroom?

Hi
I need to upgrade my PC in a couple of months time and I was wondering if there is any merit in going for an Intel quad core processor. Intel are reportedly almost halving the price of the Q6600 to $266 on the 22nd of July.
Does anyone know if Lightroom can take advantage of all 4 cores? Or, am I better off getting a faster Dual Core processor for the same price?
Regards, Nigel

I see that Jeff Schewe mentioned that he was getting a 2xQuad Core (Octa Core?) machine so there must be some benefit in more than 2 cores.
]See
Jeff Schewe, "Lihtroom does not do it's job...full stop" #22, 16 Jun 2007 4:31 pm
Anyone else here with first-hand experience with this?
Regards, Nigel

Max Number of Procurement Proposal for a date

We have scenario where a user has changed fixed lot size for a material 11,70,000 to 1 Pc. As result more than 2 Million Purchase requisitions got created by MRP. Is there any standard config settings, where we can maintain max number of procurement proposal for given date or demand. So that we can prevent such occurances in future.

Hello Amit.
The materials planning creates a large number of order proposals in the amount of the fixed lot size for this one request for a fixed lot size (lot-sizing procedure 'FX') with a large number of requests and a small number of fixed lot sizes.
In Customizing for the plant parameters of materials planning (transaction OPPQ, table T399D) you can set a parameter for the maximum number of order proposals that are created by materials planning for a requirements date.
The materials planning of this material terminates regularly if the maximum number is exceeded. An error document with error message E098 is generated. This way you can prevent that the MRP run terminates if the lot-sizing procedure is set unfavorably.
Best Regards,
R.Brahmankar

[svn:osmf:] 14928: Fix bug FM-468: Initial and max indices not being respected for RTMP MBR.

Revision: 14928
Revision: 14928
Author:   [email protected]
Date:     2010-03-22 17:35:43 -0700 (Mon, 22 Mar 2010)
Log Message:
Fix bug FM-468: Initial and max indices not being respected for RTMP MBR.
Ticket Links:
    http://bugs.adobe.com/jira/browse/FM-468
Modified Paths:
    osmf/trunk/framework/OSMF/org/osmf/net/NetStreamSwitchManager.as
    osmf/trunk/framework/OSMFTest/org/osmf/net/TestNetStreamSwitchManager.as

MAX timed out while waiting for a driver

I am getting an error when starting MAX. the error is that MAX timed out while waiting for a driver (nidaqe plug-in). I have a PCI-GPIB card and an PCI-MXI-2 card in the PC. The operating system is Windows XP.
I am able to see both these cards under the Windows Device Manager>Hardware.
MAX version is 4.6.1f0
I have also installed NI-488.2 and NIVXI331 driver installed on the computer.
Any help will be appreciated.
Thank you.
vxiguy

Hi vxi_guy,
What you're seeing could be the result of a few different things. First, I would check to see if the NI Configuration Manger and NI Device Loader are running, as per this KB. Then, if that doesn't work, I would explore the solutions described in this KB. Please let me know if neither of those articles resolve the issue. Have a good one!
aNItaB
Applications Engineer
National Instruments
Digital Multimeters

In-app extension for Air for iOS clarifications ?

Hello there,
While trying to implement Milkman in-app extension for Air for iOS, I have couple of things to clarify.
1. Can we use this plugin to buy a third party game from within my app using in-app purchase?
2. Can a third party app access the in-app purchase details from my app, if shared? If yes, How?

I am unable to click on the item to download it. What am I doing wrong??
You may have disabled in-app purchases.
Check in the Settings.app:
Settings > General > Restrictions

HT4972 I can't update my iPad to iso 5 please help. When I go to settings and then to general it doesn't have an update button for "check for updates". Thanks

I can't update my iPad to iso 5 please help. When I go to settings and then to general it doesn't have an update button for "check for updates". Thanks

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
 Cheers, Tom

Validation for issue for production not working

hi all,
i have designed database validation for issue for production .
by default SAP gives error if instock is less than the quantity to be issued.
My Clients requierment is whlie issuing item for production, row level item quantity should not be greater than the instock of a warehouse selected for that item in row level.
while in case of sap default validation it considers all the instock of item from all the warehouse and i want to consider only those stock of warehouse whih is selected for the item at row level.
my validation is as follows but it gives error for all cases.
IF @transaction_type in ('A','U') AND @object_type = '60'
BEGIN
declare @line as numeric(4)
declare @dline as numeric(4)
declare @ritem as nvarchar(50)
declare @bref as nvarchar(50)
select @bref= T1.[BaseRef] from OIge T0 left outer JOIN
Ige1 T1 ON T0.DocEntry = T1.DocEntry
left outer join oitm t2 on t2.itemcode=t1.itemcode
left outer join OITW T3 on t3.whscode=t1.whscode and t3.itemcode = t1.itemcode
where T1.docentry=@list_of_cols_val_tab_del
set @dline=0
select @line= isnull(max(t1.linenum),0)
from OIge T0 left outer JOIN
Ige1 T1 ON T0.DocEntry = T1.DocEntry
left outer join oitm t2 on t2.itemcode=t1.itemcode
left outer join OITW T3 on t3.whscode=t1.whscode and t3.itemcode = t1.itemcode
where t1.docentry= @list_of_cols_val_tab_del
while @dline<=@line
begin
select @ritem= t1.itemcode from OIge T0 left outer JOIN Ige1 T1 ON
T0.DocEntry = T1.DocEntry
left outer join oitm t2 on t2.itemcode=t1.itemcode
left outer join OITW T3 on t3.whscode=t1.whscode and t3.itemcode = t1.itemcode
where T0.DocEntry = @list_of_cols_val_tab_del and
t1.linenum=@dline
if exists (SELECT T0.DocEntry
from OIge T0 left outer JOIN Ige1 T1 ON T0.DocEntry = T1.DocEntry
left outer join oitm t2 on t2.itemcode=t1.itemcode
left outer join OITW T3 on t3.whscode=t1.whscode and t3.itemcode = t1.itemcode
where T0.DocEntry = @list_of_cols_val_tab_del and
t1.linenum=@dline and t1.itemcode in (@ritem) and t3.onhand < t1.quantity )
BEGIN
SELECT @Error = 1, @error_message = 'less quantity'
END
set @dline=isnull(@dline,0)+1
set @ritem=' '
end
END
pls suggest solution...

Iu2019m sorry. The error was that the tables contain the data after the transaction. So try this:
IF @object_type = '60' and @transaction_type= 'A'
and (Select top 1 j.BaseType from IGE1 j
      Where j.DocEntry = @list_of_cols_val_tab_del)=202
BEGIN
if exists
(Select i.DocEntry from IGE1 i
   Where i.DocEntry = @list_of_cols_val_tab_del
    and (select w.OnHand from OITW w
        where w.ItemCode=i.ItemCode and w.WhsCode=i.WhsCode)<0 )
Begin
set @error =1
set @error_message = 'Less quantity in the warehouse !'
End
END

How much is the maximum support for memory for hp dv6 6b68ex?

i recently bought the HP dv6 6b68ex. i want to add more ram since only 6gb is installed
i would like to ask if how much is the maximum support for ram for my laptop
thanks

Hi,
Ok, I've found it now. Based on the following information, max RAM is 8Gb:
http://h20195.www2.hp.com/v2/GetPDF.aspx/c03063996.pdf
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to mark flag for deletion for bulk of customers.

Hi friends,
GM..
I hv a question , that how to mark flag for deletion for bulk of customers.Few function modules are there (eg. HRCA_CUSTOMER_DELETE ) which are going to 'XD06' transaction to set the flag for individual customers.
But data is huge so it's not possible to go & mark the flag for deletion for individual customers.So what is the solution for this.....
waiting for ur reply....
Thanx.
Regards,
Ajit.

Hi Ajit,
XD99 can be used as a appropriate mass deletion tool for customers .
It is good for max 500 customers to mark for deletion, if you have more than that some times you may get dump.
OR
You can write a program to read an excel file into an internal table and call the function BUP_BUPA_MASS_DELETE to delete the customers.
OR
To mark the BP's for Delete use the following code sample.
It marks the BP's for Delete and once you archive them delete them in bulk.
data : BUPANUM type BU_PARTNER,
RETMSG type ITMSG,
ls_central type BAPIBUS1006_CENTRAL,
ls_Central_X type BAPIBUS1006_CENTRAL_X.
ls_central-CENTRALARCHIVINGFLAG = 'X'.
ls_central-CENTRALBLOCK = 'X' .
move-corresponding ls_Central to ls_Central_X.
CALL FUNCTION 'BAPI_BUPA_CENTRAL_CHANGE'
EXPORTING
BUSINESSPARTNER = BUPANUM
CENTRALDATA = ls_Central
CENTRALDATA_X = ls_Central_X
TABLES
RETURN = RETMSG.
if you give me brief i can help you out more.
Thank you .
Regards
Ram

Which BAPI to use for GR for PO reversal (mvt 102)?

I'm trying for look for a BAPI that can used to post GR for PO reversal, which is mvt 102. I try to use BAPI_GOODSMVT_CREATE to do it, but I encounter errors, I have tried different set of parameters, but all are not sucessful. Below is the few set of parameters that I tried:
1)
goodsmvt_code-gm_code       = '06' .
goodsmvt_header-pstng_date = sy-datum.
goodsmvt_header-doc_date    = sy-datum.
goodsmvt_item-stge_loc   = v_sloc.
goodsmvt_item-po_number = v_po.
goodsmvt_item-po_item    = v_poline.
goodsmvt_item-move_type = '101'.
goodsmvt_item-entry_qnt = v_qty.
goodsmvt_item-XSTOB      = 'X'.
Error message: Goods movement not possible with mvmt type 102
2)
goodsmvt_code-gm_code       = '06' .
goodsmvt_header-pstng_date = sy-datum.
goodsmvt_header-doc_date    = sy-datum.
goodsmvt_item-stge_loc   = v_sloc.
goodsmvt_item-po_number = v_po.
goodsmvt_item-po_item    = v_poline.
goodsmvt_item-move_type = '102'.
goodsmvt_item-entry_qnt = v_qty.
Error message: Goods movement not possible with mvmt type 102
3)
goodsmvt_code-gm_code       = '01' .
goodsmvt_header-pstng_date = sy-datum.
goodsmvt_header-doc_date    = sy-datum.
goodsmvt_item-stge_loc   = v_sloc.
goodsmvt_item-po_number = v_po.
goodsmvt_item-po_item    = v_poline.
goodsmvt_item-move_type = '102'.
goodsmvt_item-entry_qnt = v_qty.
goodsmvt_item-mvt_ind    = 'B'.
Error Message: No goods receipt possible for purchase order 5000000017 00001
Does anybody knows the correct parameters for mvt 102? Or I'm using the wrong BAPI ? Please kindly help.

Hi,
the basic thing i guess is first you have reverse the PGI done in may now at the current date as the periods would have been closed for the previous months. And if it is in production then you cannot do a posting in a previous month just because, you would be forced to open the previos periods causing inconsitency in the chronology. But however there is a possibility of allowing posting in previous periods also by using MMRV. Pl try. but make sure it is acceptable for the business and does nt affect any other areas. But it might just do so.
Use T.code VL09 or use BAPI_GOODSMVT_CANCEL
refer the link
https://forums.sdn.sap.com/click.jspa?searchID=3586093&messageID=3598826
Regards

OneDrive for Business for iOS Devices - Accessing Non Office 365 Hosted Sites

Hello,
I have a SharePoint site that I host on premise and am not using Office 365 at all. Is it possible for me to access the site using the iOS version of the OneDrive for Business app? When I specify my username, password and SharePoint 2013 site
URL i get a login error with username/password incorrect.
Does the iOS app only support Office 365 implementations of SharePoint?
Thanks

what type of authentication you are using, this is the key?
check this official blog:
http://blogs.office.com/2014/02/27/introducing-onedrive-for-business-for-ios-v1-2/
http://social.technet.microsoft.com/Forums/sharepoint/en-US/3ad5b8ca-37e9-43b2-9201-9c5c339d157c/onedrive-for-business-ipad-app-with-onpremise-sharepoint-2013?forum=sharepointadmin
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Clarification of Max 2xCPUs Caveat for OBISE1 for Multi-Core Processors

Similar Messages

Maybe you are looking for