Clarification on Account grouping -OMWN for 101 movement type
Hi SAP MM gurus,
In OMWN - Account grouping , I am not able to find any entry for 101 (Goods receipt for Purchase order B and with no consumption posting ) with Value and Quantity updates . There are entries for 101 movement type with special stock indicator but not able to find any entry for standard good receipt for Purchase orders ( No Special stock Indicator , Value and Quantity update checked , Movement type indicator B and No Consumption posting ). There are no issues with the accounting posting for goods receipt with standard purchase order with BSX being debited and WRX being credited. I am trying to understand the logic for this posting and I am not able to understand from where (customization settings) this posting is derived from. May I request your valuable inputs in understanding this logic.
Thanks in advance for your immediate response.
with regards,
Anandj
Hi there,
Not sure where you want to go... but here is a tip
Would it make sense to have value and qty update and no consumption ? it can either one or the other but not both.
Now in prg there are further checks that makes other option possible like a GR for PO that is not valuated.
Remember that these key determination behind the account grp / TE key is a kind of black box where the prg is hardcoded to sort out what keys to take.
I hope this helps... Cheers
Similar Messages
-
Storage location not found in MIGO for 101 movement type
Hi all,
While posting goods receipt in MIGO for purchase order using 101 movement type,i am not getting the storage location field..Though goods is getting posted in migo transaction,it is not getting updated in the stock while seeing it in mmbe...
can anyone help me..
Thanks&Regards,
HariHi,
When ever we purhcase a material , it can be for two purpose
1. Material to Stock
2. Material for Direct consumption
If you wish to stock the material Material No is required and Cost Center Assignment is not required. In this case when you create Goods Receipt (MIGO) storage location will be asked.
If you have given a Cost Center or say any other Account Assignment, then at the time of GR (MIGO) storage location would not be asked, as the system assumes that it is for that particular cost center.
I think in your case you have given some Account Assignment category in your PO. Please check.
Hope it is of your use. Please reward.
Nikhil -
Goods Receipt Report With 101 movement type using bapi_goodsmvt_create
Dear Abapers,
i am getting some problem, i got requirement like Goods Receipt Report with 101 movement type using
bapi_goodsmvt_create and data should upload through excel sheet.
still facing problems, i have searched sdn forum n sdn code also, but relevant answer i could not find.
What are all the inputs i need to take and please give some valuable inputs to me.
please do help ..... thanks for advance..
Thanks & regards,
Vinay.
Moderator message : Spec dumping is not allowed, show the work you have already done. Thead locked.
Edited by: Vinod Kumar on Sep 27, 2011 10:58 AMDear Abapers,
i am getting some problem, i got requirement like Goods Receipt Report with 101 movement type using
bapi_goodsmvt_create and data should upload through excel sheet.
still facing problems, i have searched sdn forum n sdn code also, but relevant answer i could not find.
What are all the inputs i need to take and please give some valuable inputs to me.
please do help ..... thanks for advance..
Thanks & regards,
Vinay.
Moderator message : Spec dumping is not allowed, show the work you have already done. Thead locked.
Edited by: Vinod Kumar on Sep 27, 2011 10:58 AM -
Amount not turning up for material movement type : 601 from 2lis_03_bf
Hi all,
i have loaded the inventory cube from 2lis_03_bx the quantity is turning up for movement type 601 but the amount is not getting reflected it is always blank.
If ( SOURCE_FIELDS-BWVORG EQ '000' "Other Issues
OR SOURCE_FIELDS-BWVORG EQ '101' "Returns / Vendor
OR SOURCE_FIELDS-BWVORG EQ '104' "Material Transfer
OR SOURCE_FIELDS-BWVORG EQ '105' "Stock Adjustment InvD
OR SOURCE_FIELDS-BWVORG EQ '106' "Stock Ajdustment Other
OR SOURCE_FIELDS-BWVORG EQ '110' )
"Issues from stock transfer
AND SOURCE_FIELDS-BWAPPLNM EQ 'MM'
only movements which are relevant for stock control
AND SOURCE_FIELDS-BWBREL EQ '1'
AND SOURCE_FIELDS-BWGEO <> 0
SEE OSS NOTE 630254
AND ( SOURCE_FIELDS-BSTTYP IS INITIAL OR
( SOURCE_FIELDS-BSTTYP CA 'EQ' AND
SOURCE_FIELDS-KZBWS CA 'AM' ) ).
*IF THE RETURNCODE IS NOTE EQUAL ZERO, THE RESULT WILL NOT BE UPDATED
RESULT = SOURCE_FIELDS-BWGEO.
and i can see for other movement type like 641 the amount is turning up.
Can anyone advise me on this
thanksdoes the material movement type : 601 will be updated from this data source : 2lis_03_bx nor it is from 2lis_03_um??
Can anyone advise me on this!!
thanks -
Hi Guru;
In our system for 641 Movement Type Batch is not coming for Receiving Plant.
Ex
MBLNR MJAHR BWART MATNR WERKS UMWRK LGORT UMLOG CHARG UMCHA
4900342714 2010 641 1256-3230-0 M300 B311 MA01 1000015247
4900342714 2010 641 1256-3230-0 B311 M300 MA01 1000015247
4900342724 2010 641 1256-2190-0 B121 M100 MA01 1000016376
4900342724 2010 641 1256-2190-0 M100 B121 MA01 1000016376
In Above Data For MAT DOC 4900342714 Batch is not coming for Plant B311. We are doing Batch ageing from the batch creation date.so for these case (i.e for Stock in Transit data we are not able to show that in our ageing report as it is showing these without batch)
I want to kw that, is there any problem in our system or its a standard and how to handle this situation.
ThnaksHi,
For this you need to set up Strategies for Stock determination.
Trasncation code : OSPX
Go to new entries.
Enter your plant code and any 4 digit key and save.
Select this entry and click on the stock determination rule. Type any 4 digit key and save.
Click on Stock determination header. Select your entry, which is having your given plant code, stock determination group and stock determination rule and click on the stock determination item table.
there you have to maintain all ur batches as per the combination of Periotity indicator, Storage location and stock indicator.
For first periority - 1& second periority - 2 & third periority - 3
Storage location - 0001
stock indicator - F for standard & K for consignment.
F 0001 1 A
F 0001 2 b
F 0001 3 c
F 0001 4 d
This stock determination group ( 4 digit key), you have to maintain in the material master record - MRP2 view.
Maintain stock determination group and MRP profile - ND
Then during GR, system will check stock determination group in the MMR and based on that first system stock availability for the first periority batch. If stock is there, it will pick. If stock is not there, system will pick second one.
Regards
KRK -
Authorization object for 351 movement type
Dear expert
Please guide me
How to restrict 351 movement type for created STO for self plant in self plant?
for eg : there are 2 plant 1001, 2001.
STO CREATED IN 1001 PLANT
IN THIS suppling plant : 2001 & Recieving plant : 1001
Now, suppling plant has to do 351 movement type & Recieving plant has to do 101 movement type.
Now my doubt is receving plant should not do 351 movement type.
but it shows that my 1001 plant (receving plant) doing 351 MOVEMENT TYP.
Logically it should not do this.
So , How to restrict 351 movement type for created STO for self plant in self plant?
Regards
SANTOSH KADAM.M_MSEG_BMB
M_MSEG_BWA
M_MSEG_BWE
M_MSEG_BWF
M_MSEG_LGO
M_MSEG_WMB
M_MSEG_WWA
M_MSEG_WWE
M_MSEG_WWF
if your 1001 plant never needs a 351 movement, then dont assign the 351 together with 1001 in these objects for roles that are used in 1001 plant.
But if 1001 needs to perform as well a 351 to any other plant, then you cannot use authorization to restirct it. -
Make field selection for 201 Movement type for MB21 t.code
Hello,
I have making reservation through T.code..
In that screen we have entered Movement type 201 in MB21 t.code ,,it will show me two fileds
G/L Account filed and Cost center..
In that Cost center field is mandatory.....User told me to do the G/L account filed mandatory... how to do this....
In filed selection there is only one fieled is the cost center....then there is no filed for G/L Account.
Regards
sapman manHello,,
For G/L account mandatory ..in 201 Movement type.
Go to Spro-Inv ManagementGoods issuse/Transfer PostingSet manual account assignment---and Give + sign Infront of movment type 201.
It will make the field G/L Account in MB21 201 movement type
Regards
Mahesh Naik. -
MIGO for new movement type...
Hi,
Is it possible to make GR/MIGO for a particular type of purchase order document type with a customized movement type..
Can it be so that the purchase order type (document type) is linked only to a particular customized movement type...
Thanks,
RahulHi,
There is no linkage betwen Purchase order type and the Movement type Yet in SAP.
Movements always depends on what transaction your Doing, like for STO system will not allow you to proceed with 101 movement type to Transfer like wise.
and for customized the movement type you can see in OMJJ Tcode the allowed transaction for processing the same.
Regards,
Ninad Kshirsagar -
MIGO 101 movement type- Excise tab.
Hi ,
Excise tab is not coming for the movement type of 101 in migo, For all other movement type's ,it ll come, why reason???
I made all settings in J1ID.
-Thanks & Regards.
Balajee Jeyaraj.Hi ,
I am also having the above said problem, But in my case both the materials are maintained by value and quantity. What else could be the issue ? One material value is maintained with standard price for another it is maintained with moving average price. For moving average price maternail the storage location is getting displayed.
Your inputs will be helpful.
Regards
Prasath -
Bapi_goodsmvt_create for 961 mov. type
hi all,
can i use bapi_goodsmvt_create function module for 961 movement type?
Edited by: vinil aturi on Jun 11, 2008 11:10 AMdear aturi,
what is the 961 movement type for ?
Yes you can definitley use BAPI_GOODSMVT_CREATE for 961 Movement Type
as i had used it for 101 and 301 movement types in my program.
Hope this helps you out.
Do reward if useful.
Thanks
Venugopal -
Sap notes for 103 movement type and 105 movement types in sap
Hi all,
Please let me know if there are any sap notes for 103 movement type and 105 movement type in sap as soon as possible
points will be awarded.
thanking u in advance,
srinivas.There are many SAP notes related to these movement types e.g 514609,750836,
533833, 808029, 317823,etc.
You can search them at http://service.sap.com
Regards,
Amit -
Report MB5B for selected movement types
Dear All,
When I am executing report for selected movement types , system givivng me message below " Movment type is reset"
After continuing that Movement type field turns BLANK, and report is executed with considering all movement types.
If there is a way for executing MB5B report for selected movement types, please suggest.
Thanx..Hai,
1.The MB5B report will show the stock on posting date with all movements like Goods recipt from Purchase, production order, stock transport order, & goods issue due to consumption posting, stock transfers & transfer posting.
2. This is designed to see the Opening balane+Goods receipt - goods issue = closing balance.
3.You can't take report only for particulat movement type.
4.If u want to get the details as per the movement type, then use MB51 report. -
PGI for STO movement type error Message no. L9005
Hi Gurus,
I have created an STO.Created delivery and confirmed TO.
Now while doing PGI,single step only(647 movement type),
system throws the following message,
"" Error during search for WM movement type (641 1 L K )
Message no. L9005 "".
As per my checking for both IM movement types 641 and 647, ' 641 ' has been assigned as
Ref movement type and " 601" has been assigned as WM movement type.
601 is maintained in WM.Should I maintain 641 in WM?That case I have to change SAP std settings..
If so pls provide me the details for 641 K.
Kindly help.
Best RegardsHi Kumar,
Try the following:
Maintain an entry for your warehouse with movement type 641 SpStIn and Movment Indicator l combination in transaction OMLR.
And also ,
Check in IMG Path - Enterprise Structure --> Assignment --> Logistis Execution --> Assign warehouse number to plant/storage location.
Here check whether the warehouse number is assigned to your plant and storage location.
Thanks!
Preethi
Edited by: preethi R on Dec 2, 2008 10:50 AM
Edited by: preethi R on Dec 2, 2008 10:50 AM -
Batch Creation or Batch Determination for 531 movement type
Dear Experts,
I have some confusion with Movement type 531 -
1) Can we do Batch determination for 531 movement type.
2) Can we do the automatic Batch creation at the production order level or confirmation level. In this case i have done the settings but in confirmation screen i have to create batch manually through Menu Path.
3) I have to enter characteristics value manually in confirmation screen as i have select classify batches in foreground. But in material master we have Batch Class type so can values comes from there to batch of confirmation screen.
Thanks & Regards,
Saurabh KumarHello
Please read carefully notes 191368 and 194619. These are very old correction notes and they are already implemented on your system, however, they provide the following information about the system design:
For a by-product or co-product, no batch determination is executed anymore. The subsequent stock determination is not executed anymore either.
and
No batch determination for by-products may be executed during the confirmation.
It means that the batch determination for movemen 531 is not a functionality of the standard system.
I have never tested this scenario, however, as far as I know, the batch can be created automatically for the by-product if you are using internal number range on OMCZ.
BR
Caetano -
Error during search for WM movement type (999 E )
Dear ALL,
I am try to reverse transaction 313. i use movement 314 but there is error message during creating delivery. the message is
"Error during search for WM movement type (999 E )"
Could someone help me please ?
Thanks & Best regrads,
Saiful arifHi,
Please check the reference movement type in table V_156S_WM for inventory movement 314 and for your case of qty and value update indicators
For qty updation indicator checked, you will have a reference movement type 3XX and not equal to 999
for qty updation indicator not checked, you will have reference movement type 999
qty updation indicator checked means stock / quantity controlled in which case
check your set up in transaction OMLR , reference movement 3XX from above table should be assigned to a proper WM movement type 3YY
then check for WM movement 3YY in Transaction OMLJ which should have source storage type maintained.
qty updation indicator not checked means stock / quantity not controlled or updated in which case reference movement type is 999 which has no maitenance in OMLR, moreover it is no stock / qty and no stock transfers situation
If 3XX happens to be 999 in your case, then check for 3YY movement in OMLR and check for storage type determination for 3YY in OMLJ
Please note 999 as WM movement is used for manual transfer within warehouse but not for warehouse movements resulting from IM.
Hope this should solve your problem.
Regds
Shrihari
Maybe you are looking for
-
Table size exceeds Keep Pool Size (db_keep_cache_size)
Hello, We have a situation where one of our applications started performing bad since last week. After some analysis, it was found this was due to data increase in a table that was stored in KEEP POOL. After the data increase, the table size exceeded
-
Problem with keeping attributes updated
We have a problem with the server model in Designer. We have made a E/R diagram and genereted it to a server model diagram. Afterwards we want to delete some attributes which we delete back in the E/R program. Then we make some new attributes instead
-
Quicktime not playing .avi file!
I have been trying to figure out why it doesn't play for a day now. The thing is, it only doesn't play this .avi file, others I have can play it. It says it needs another component to play it and directs me to the extra quicktime downloads page, but
-
I can't connect to the iTunes in my iPad?
How to activate the I tunes in iPad
-
Satellite A660 webcam not in device listing
Have had A660 PSAW3A-07R00R for a couple of years but unable to use Webcam as it is not in the device listing. I have downloaded the webcam application on several occasions, the most recent being V1.1.1.15, but does nothing after extraction.