Clarification on Determining the Receivers

Hi,
Here i have one requirement like......
I have 1000 receivers based on the payload it should be determined at the time of runtime
How can i achieve this
Regards
Suman

Hi Suman,
I am Sorry, may be I have interpreted in different way.
But as per your question
Do i need to create 1000 Receiver Channels ????????
the answer is
NO ---Provided you could be sending all the 1000 files to same File server.
The directory name and file name have to be varied based on receivers.
You can use single Receiver Channels .
If the file server location is different then you have to create 1000 Receiver Channels
Thanks
Swarup
Edited by: Swarup Sawant on Feb 14, 2008 3:10 PM
Edited by: Swarup Sawant on Feb 14, 2008 3:10 PM

Similar Messages

Using File Name to determine the Receiver

Hi All,
I have to determine the receivers based on the Input file name. I am using the context object File Name in the condition editor. But based on the first 4 characters of the FileName I have to route the file. Can anybody please help how to formulate this expression in the condition editor?
Thanks,
Geetha

Hello Geetha,
         You need to specify this in you mapping as in condition editor you can not specify values at runtime. What you need to do is
-> Select the Extended Reciever Determination in ID
->In IR specify the mapping for determining the receiver (You need to use the another mapping for this)
        . Here copy the MessageType 'Receivers' from the component as your target MT
          SAP BASIS 7.0 (Depends on your version)-> "htt://sap.com/xi/XI/System" namespace.
       . Define Message Mapping between Outbound Message Type(The one with your filename) and
         Standard Message Type u201CReceiversu201D which is as Inbound message type and which is in the SAP
         BASIS -->http://sap.com/xi/XI/System
       . In mapping specify your service based on your First 4 character of your file name(Use SubString)
IF filename -> SubString(0,4) ->Equals ->   filename -> SubString(0,4) Then Select Your Service ( Service in Constant value). ELSE (your logic)
Once you finish this remaining as usual in IR, while InterfaceMapping you select two mapping programs.
Remmber to use the Extended Interface Determination in ID, This resolves your issue.
Regards,
Pasanna

Call RFC for Lookup from BPM. how to determin the correct target system

Hi
I have a scenario where i am sending a sync call to SAP R/3 to fetch some sata using the BPM.
The issue is I can have multiple SAP systems so to determin the SAP system for the correct lookup is necessary.
in the rec determination step of Config I can configure multiple receivers but this isthrowing an error saying the multiple receivers cannot be determined for sync step.
Any idea why is such an error occuring
Regards
Nikhil

Nikhil,
Multiple Receivers cannot be configured for a Synchronous Interfaces. reason is that when you are sending the request message to the target systems, XI will recieve multiple responses for one request and this is aginst the concept of Synch Message Processing.
You will have to have an option of determining the receivers inside your BPM and using separate Send Steps for each of these.
Regards
Bhavesh

Clarification required on the Sales area data information.

Hi Master's,
As per the standard taxation practice,Tax determination depends upon the Tax liability of a Shipt to Party.
But in a Customer master The Tax classification is maintained in the SALES AREA DATA-BILLING TAB,To my understanding
the Billing Tab data comes from Sold to party.If so how does Billing tab convey the Tax liability of Ship to party.
I am Confused,please let me know in terms of Customer master and Partner types:
1) Which Tabs under the sales data i.e Shipping Billing...come from which Partner.i.e like Sold to party.
(Clarification required on the Sales area data information coming from which Partner functions).
Please suggest,
Thanks
Gajender

Hi
As per the standard taxation practice,Tax determination depends upon the Tax liability of a Shipt to Party.
But in a Customer master The Tax classification is maintained in the SALES AREA DATA-BILLING TAB,To my understanding
the Billing Tab data comes from Sold to party.If so how does Billing tab convey the Tax liability of Ship to party.
I am Confused,please let me know in terms of Customer master and Partner types:
1) Which Tabs under the sales data i.e Shipping Billing...come from which Partner.i.e like Sold to party.
(Clarification required on the Sales area data information coming from which Partner functions).
There is no need of any confusion here
All the tabs and data or fields pertains sold to party only
If for a sold to party say 1001 if he himself is going to be SH and PY and BP then there is no confusion
If for a sold to party say 1001 the ship to party is 1002 and PY is 1003 and bill to party is himself that is 1001
This is what mentioned or assigned in the partner functions of CMR of 1001 in the sales area data
This means there are another CMR lies in the name of 1002 and 1003
Whenever an order comes for 1001 as Sold to party for tax classifications the ship to paty 1002's master record is accessed by the system
System accesses another record for a particular detail (tax details)
Similarly for this customer 1001's order for payment terms 1003's CMR is accessed by the system
System accesses another record for a particular detail ( for terms of payment)
There is no need for any confusion and if you run this in the system with different data you will understand it much better
Regards
Raja

E613 SYST: You cannot determine the period for rule 03

Dear All,
We are configuring asset module and using MSTL dep key for Tax books. When we tried to create an asset with MSTL dep key, we encountered error - 'E613 SYST: You cannot determine the period for rule 03'. when verified config OAVH Define Calender Assignments transaction, Period control '03' is missing for fiscal year variant K4. Period control is exisiting in Maintain Period Control and but not in Define Calender Assignment. What I understand these period controls are being delivered by SAP. Not sure why period control '03' is missing. all other period control keys are available.
question is how to add period control 03 so that we can use MSTL dep key. we are currently using 4.7c. Any suggestions would be appreciated.
thanks
Sunil

message went abruptly before I finish.
+++++++++
continuing from previous email
Period control 01 has following entry in the transaction
Fiscal Year Variant Per control Name of the period control Year Month Day Period Mid Month
K4 01 Pro rata at period start date blank 0 0 blank not selected
If I follow SAP help to define period control '03', then I just need to copy period control '01' which is listed above and select 'Mid Month' check box.
Wondering anyone did this in the past. MSTL depreciation key is being used in MACRS tax for US. I am sure people who have implemented assets module for US with tax dep, they might have encountered this issue.
thanks
Sunil

How can I determine the type of video out connector I need?

Howdy,
I have a white macbook purchased Jun/2008. I want to connect to a TV but don't know what adapter I need. How can I determine the type of video out jack my macbook has?
System Profiler says the model identifier is "MacBook 4,1". Under Graphics/Displays the only thing it says about the "Display Connector" is that no display is connected. Too bad it doesn't tell me what type of connector it is. If I knew the name of the connector I'd probably be home free. But it seems like every macbook model has a different video connector (since the state of the art has advanced over the years) and I haven't been able to keep up with the names.
Now, I have a 6" long adapter that will convert this connector to VGA. And searching the Apple store for VGA adapters, the existence of mine says my connector is might be one of "Mini DisplayPort", "Apple Mini DVI", "Apple DVI", or "Apple Micro-DVI". But then there is also the connector at
http://store.apple.com/us/product/M8639G/A?mco=MTY3ODQ5OTY
and that looks like the one I have. But unlike the other adapters, this one is just called a "VGA Display Adapter". Does the connector have a name? How can I find adapters that have that same connector?
I know I could use the adapter I have, plus a VGA to VGA cable, to hook up to a TV. But the quality of the VGA signal is poor in the digital world. My goal is to hook up to the TV via HDMI. Is this even possible? By which I mean, will my macbook generate the signals necessary to be able to be converted to HDMI?
Thanks for any help,
Zebulon T

Thanks, Ded,
You're right, the cable that I have won't work. I't from my previous, 2004 iBook. This is pretty embarrassing... I looked at the cable but didn't bother to try plugging it in.
Looking at the close-up picture of the Mini-DVI to VGA adapter, that does look like the right connector. So I have Mini-DVI, and the other apter you pointed to can convert this to DVI. I'll take a look to see what makes the most sense, connector wise, downstream from that.
Thanks very much.
Zeb T

I am trying to determine the new project preset for multi-camera video shot as follows: 3 Canon camcorders, main shot is DV (tape) (720x480), b-roll is DVD (mini-disk) (720x480), additional b-roll is AVCHD (1920x1080). Film is from a wedding, DV contain

I am trying to determine the new project preset for a multi-camera video shot as follows: 3 Canon camcorders,
Main shot is DV (tape) (720x480, 29fps) - ceremony and reception
b-roll is DVD (mini-disk) (720x480, 29fps) - bride preparations
additional b-roll is AVCHD (1920x1080, 29fps) - groom preparations and misc all day ceremony and reception.
Film is from a wedding, DV contains main footage so I assume it will need to be the base. I am planning to use the preset for DV-Widescreen. Is there a better option? I'm concerned about playback as the three appear to have different PAR. I'm using Premiere Elements 10 on W8.
Ultimately this will be burned for two formats - one for a DVD that can be watched on a widescreen TV, second for a short clip trailer to go on vimeo.
(And no I won't be doing this again for a wedding that I shoot.)

VDRAVES
Please review since I am not sure how you obtained Video 3 tall when you scaled Video 3 with Constrain Proportions in effect.
Before
After
It becomes a zoomed in effect to get rid of the black borders. But, there is no tall and thin involved anywhere.
And, after the Scale increase, you can always click on the screen and move the image around a bit
(without overdoing it to get black borders again).
After and an adjust
Please let us know if you are OK with the information above.
Thank you.
ATR

How Can I Determine the Size of the 'My Documents' Folder for every user on a local machine using VBScript?

Hello,
I am at my wits end into this. Either I am doing it the wrong way or it is not possible.
Let me explain. I need a vb script for the following scenario:
1. The script is to run on multiple Windows 7 machines (32-Bit & 64-Bit alike).
2. These are shared workstation i.e. different users login to these machines from time to time.
3. The objective of this script is to traverse through each User Profile folder and get the size of the 'My Documents' folder within each User Profile folder. This information is to be written to a
.CSV file located at C:\Temp directory on the machine.
4. This script would be pushed to all workstations from SCCM. It would be configured to execute with
System Rights
I tried the script detailed at:
http://blogs.technet.com/b/heyscriptingguy/archive/2005/03/31/how-can-i-determine-the-size-of-the-my-documents-folder.aspx
Const MY_DOCUMENTS = &H5&
Set objFSO = CreateObject("Scripting.FileSystemObject")
Set objShell = CreateObject("Shell.Application")
Set objFolder = objShell.Namespace(MY_DOCUMENTS)
Set objFolderItem = objFolder.Self
strPath = objFolderItem.Path
Set objFolder = objFSO.GetFolder(strPath)
Wscript.Echo objFolder.Size
The Wscript.Echo objFolder.Size command in the script at the above mentioned link returned the value as
'0' (zero) for the current logged on user. Although the actual size was like 30 MB or so.
I then tried the script at:
http://www.experts-exchange.com/Programming/Languages/Visual_Basic/VB_Script/Q_27869829.html
This script returns the correct value but only for the current logged-on user.
Const blnShowErrors = False
' Set up filesystem object for usage
Set objFSO = CreateObject("Scripting.FileSystemObject")
Set objShell = CreateObject("WScript.Shell")
' Display desired folder sizes
Wscript.Echo "MyDocuments : " & FormatSize(FindFiles(objFSO.GetFolder(objShell.SpecialFolders("MyDocuments"))))
' Recursively tally the size of all files under a folder
' Protect against folders or files that are not accessible
Function FindFiles(objFolder)
On Error Resume Next
' List files
For Each objFile In objFolder.Files
On Error Resume Next
If Err.Number <> 0 Then ShowError "FindFiles:01", objFolder.Path
On Error Resume Next
FindFiles = FindFiles + objFile.Size
If Err.Number <> 0 Then ShowError "FindFiles:02", objFile.Path
Next
If Err.Number = 0 Then
' Recursively drill down into subfolder
For Each objSubFolder In objFolder.SubFolders
On Error Resume Next
If Err.Number <> 0 Then ShowError "FindFiles:04", objFolder.Path
FindFiles = FindFiles + FindFiles(objSubFolder)
If Err.Number <> 0 Then ShowError "FindFiles:05", objSubFolder.Path
Next
Else
ShowError "FindFiles:03", objFolder.Path
End If
End Function
' Function to format a number into typical size scales
Function FormatSize(iSize)
aLabel = Array("bytes", "KB", "MB", "GB", "TB")
For i = 0 to 4
If iSize > 1024 Then iSize = iSize / 1024 Else Exit For End If
Next
FormatSize = Round(iSize, 2) & " " & aLabel(i)
End Function
Sub ShowError(strLocation, strMessage)
If blnShowErrors Then
WScript.StdErr.WriteLine "==> ERROR at [" & strLocation & "]"
WScript.StdErr.WriteLine " Number:[" & Err.Number & "], Source:[" & Err.Source & "], Desc:[" & Err.Description & "]"
WScript.StdErr.WriteLine " " & strMessage
Err.Clear
End If
End Sub
The only part pending, is to achieve this for the 'My Documents' folder within each User Profile folder.
Is this possible?
Please help.

Here are a bunch of scripts to get folder size under all circumstances. Take your pick.
https://gallery.technet.microsoft.com/scriptcenter/site/search?query=get%20folder%20size&f%5B0%5D.Value=get%20folder%20size&f%5B0%5D.Type=SearchText&ac=2
¯\_(ツ)_/¯

Is there a way to dynamically determine the number of out parameters for a server side procedure?

Hi,
Below is a helper method used for calling a server-side function which loops through the inbound bindVars parameter to populate the function's IN parameters. Is there a way to dynamically determine the IN/OUT parameters based on the procedure name in the stmt parameter? No members of the CallableStatement class seemed promising, but the getParameterMetaData() method in the PreparedStatement class seemed like it could be helpful lead. However, I have not found any detailed descriptions (yet) of how to use it.
protected Object callStoredFunction(int sqlReturnType, String stmt,
Object[] bindVars) {
CallableStatement st = null;
try {
// 1. Create a JDBC CallabledStatement
st = getDBTransaction().createCallableStatement(
"begin ? := "+stmt+";end;",0);
// 2. Register the first bind variable for the return value
st.registerOutParameter(1, sqlReturnType);
if (bindVars != null) {
// 3. Loop over values for the bind variables passed in, if any
for (int z = 0; z < bindVars.length; z++) {
// 4. Set the value of user-supplied bind vars in the stmt
st.setObject(z + 2, bindVars[z]);
// 5. Set the value of user-supplied bind vars in the stmt
st.executeUpdate();
// 6. Return the value of the first bind variable
return st.getObject(1);
catch (SQLException e) {
throw new JboException(e);
finally {
if (st != null) {
try {
// 7. Close the statement
st.close();
catch (SQLException e) {}
James

The PreparedStatement.getParameterMetaData() object is exactly what you need for this task.
Once you have the ParameterMetaData you can ask it how many parameters are present and which mode they are. The parameters are numbered from 1 to n and you can use ParameterMetaData.getParameterMode(1); to get the mode of the 1st parameter. The modes are defined as static values in the ParameterMetaData object. Check out the doc at http://docs.oracle.com/javase/7/docs/api/java/sql/ParameterMetaData.html
Timo

Best method to determine the week number of a month - SQL Server 2012

Hi,
I'm searching the most valid and tested method to determine the week number respect to a month.
Fe, the 1st January falls in the 1st week of January, the 1st February fall in the 1st week of February, and so on.
I've found many solutions but I'd like to know possibly the best one.
Thanks

Hi Uri,
SELECT DATEPART(week, '20150104')
   - DATEPART(week, CONVERT(CHAR(6), '20150104', 112)+'01')
   + 1
returns 2 and not 1. It's a Sunday.
Waiting to be spoonfed, eh?
The one-off in my query would be very simple to figure out - I forgot to add the +1. Is too much to expect from you that you could figure it out yourself?
And likewise, in my post I said that you should use "week" for weeks starting on Sunday, and "iso_week" if your week starts on Monday. Uri neglected to observe this, but you had the information to correct it. If you had been interested
in doing some work yourself, that is.
Nevertheless, there is an issue that I overlooked:
DECLARE @day date = '20160105'
SELECT datepart(iso_week, @day) -
   datepart(iso_week, convert(char(6), @day, 112) + '01') + 1
This returns -51. This is because with ISO week numbering, Jan 1st falls into week 53 of the previous year, if it's on a Friday or later. Week 1 is always the week of Jan 4th. When you week this does not happen, as week 1 is always the week with Jan
1st. (Dec 31st is always in week 53 or 54.)
To correct for this, we need this query:
SELECT DATEPART(iso_week, @day) -
   CASE WHEN DATEPART(iso_week, CONVERT(CHAR(6), @day, 112) + '01') < 50
THEN DATEPART(iso_week, CONVERT(CHAR(6), @day, 112) + '01')
ELSE 1
   END + 1
Erland Sommarskog, SQL Server MVP, [email protected]

IPCC 7 Determine the week number of a month

Hello,
I am working towards determine the week number of month and make appropriate routing changes only for that specific week. I have tried using the trunc(), getdate() and weekday(). But i fail to get the week number of a month, but I believe I have managed to the week number of a year.
The example I have considered is: On Tuesday and Thursdays in second week of every month the calls to be routed to a different skillgroup.
Please let me know if anyone has any suggestion for this.
Thanks,
FYI,
CM 4.1, CRS 3.5, ICM 7.1

Hi buddy,
Great stuff!! Your link gave me another hint of the possible solution, I was working on ICM but not sure why i did not consider CRS for this requirement , The CRS has a builtin function, I have used this builtin Methods which provided me what i expected.
The debug on the script resulted the week of the month for today which is "4".
Please let me know your view.
Thanks again!

How to determine the number of rows of data in a datatable?

I have a datatable that I fill from an SQL query. I do not know exactly how many rows of data it will return (due to my selection criteria) but will be somewhere between 100 and 300 rows. I send this data into a report but need to determine the length of the report (panel height data member) programatically based on how much data the query has returned. So, I need a way to count how many rows are filled in the data table.
I tried doing a nested "if" statement checking the value of each cell but when I tested the expression at 59 "if" statements (will need 300+) I got a parser error in lookout when I tried to accept the connection. I also tried a type of loop by assigning cursor.2 either to its own value (circular) or to its own value plus one depending on the value of the cell at cursor.2. It was close but overshot by one row or more (much more sometimes).
Any clever ideas? Perhaps I have just been looking at this problem too long. Thanks, in advance, for your help.

Since the datatable gets the data from the SQL query, you can also use the SQL statement to count the number of rows in the query result.
For example, in datatable you do "select localtime, trace1 from intdata where xxx". You can get the count by "select count(trace1) from intdata where xxx". Use the same condition in order to get the same number of rows.
Maybe another SQLExec object is needed to do the count.
Whenever the datatable executes the SQL, the SQLExec executes and return the count.
Ryan Shi
National Instruments

How to determine the number of rows to be displayed in a report

hello experts,
Has anyone ever come across this requirement before? Before a report finishes being executed and before it displays the results, is there a way to determine the number of rows to be displayed as the result?
Many thanks in advance.
Regards,
Inma

Hello Arun,
Thanks for your reply but do you know which method I should use for this purpose if I use the table interface?
Thanks,
Inma

Using Win 10 there is a need for an app to determine the full device display area and aspect ratio programitically; the dimensions are needed to create full-screen bitmap.

While Windows.Current.Bounds returns the application windows size, in order to create a full-screen bitmap my app would need to retrieve the full display area of the device. I cannot even get the aspect ratio.
Pre-Win10, using Windows.Current.Bounds I can create a bitmap of whatever size application window the user is seeing. When the user is showing my app at full screen, I can therefore get the full display area and aspect ratio of the device and create a full-screen
bitmap.
With Win10, the user would need to know to hide the taskbar and also display at full-screen before an app can retrieve the display area and aspect ratio using Windows.Current.Bounds.
Before Win10 it's obvious to the user that full-screen is or is not being used. When I create the bitmap, I create it to fit the application window. When the app is displayed full screen, the bitmap will be full screen. Also, the app starts full-screen so
I can detect the display area at startup if I need to.
With Win10, to the user the app "looks like" it is full screen with the taskbar displayed even though it's not really full screen.
I believe that in Win10 determining the full display area will be useful and not just retrieving the application window size.
musical9

Rob, Is this forum best way to get my suggestion to the development team?
Before Win10 it's obvious to the user that full-screen is or is not being used. When I create the bitmap, I create it to fit the application window. When the app is displayed full screen, the bitmap will be full screen. Also, the app starts full-screen
so I can detect the display area at startup if I need to.
With Win10, to the user the app "looks like" it is full screen with the taskbar displayed even though it's not really full screen.
Yes, Windows.Current.Bounds does work the same, but I believe that in Win10 determining the full display area will be useful and not just the application window.
musical9

Using Firefox 3.6, how do I determine the souce of a view of my business website?

I have a website, hosted by Earthlink. I employ Firefox 3.6 for viewing my website. Is their a way to use Firefox to determine the source of views of my website?
Thank you.
johnfogelman

Right-click the page and select '''View Page Source'''.

Clarification on Determining the Receivers

Similar Messages

Maybe you are looking for