Clarification regarding note 1009567

Hi,
Note 1009567 says that there are limitations of the SAP Interactive forms by Adobe Solution.
Point 22 OTF Output Format is not supported
Point 23 ASCII Output Format is not supported
Point 24 Other print formats: Prescribe, DPL, IGP Not supported
Point 25 HTML Output Not Supported
Point 26 XSF and XDF Not Supported
Please let me know the alternative solution for the above points for Interactive Adobe Forms.
Thanks,
Priti

Reclustering InfoCubes:
With reclustering, the InfoCube fact tables are always completely converted. The system createsshadow tables with a new clustering schema and copies all of the data from the original tables into the shadow tables. As soon as the data is copied, the system creates indexes and the original table replaces the shadow table. After the reclustering request has been successfully completed, both fact tables exist in their original state (name of shadow table) as well as in their modified state with the new clustering schema (name of original table).
You can only use reclustering for InfoCubes. Reclustering deactivates the active aggregates of the InfoCubes; they are reactivated after the conversion.
Reclustering DataStore Objects
Reclustering completely converts the active table of the DataStore object. The system creates a shadow table with a new clustering schema and copies all of the data from the original table into the shadow table. As soon as the data is copied, the system creates indexes and the original table replaces the shadow table. After the reclustering request has been successfully completed, both active tables exist in their original state (name of shadow table) as well as in their modified state with the new clustering schema (name of original table).
You can only use reclustering for standard DataStore objects and DataStore objects for direct update. You cannot use reclustering for write-optimized DataStore objects. User-defined multidimensional clustering is not available for write-optimized DataStore objects.
Pls chk this thread:
Shadow Table?
http://help.sap.com/saphelp_nw2004s/helpdata/en/47/5cf74153b6ca17e10000000a155106/content.htm
Hope this helps,
Reward points...

Similar Messages

  • Clarification regarding Shadow Table

    Hi All,
    Clarification regarding Shadow Table. FKK_GPSHAD is a shadow table that belongs to Business Partner. The doubts that i have is
    What is Shadow Table?
    What is the purpose of Shadow table?
    Is it correct way to update Shadow table Manually(Not using any BAPi etc....)?
    Is any BAPI available to update The above mentioned Shadow table.
    Thanks in Advance..

    Reclustering InfoCubes:
    With reclustering, the InfoCube fact tables are always completely converted. The system createsshadow tables with a new clustering schema and copies all of the data from the original tables into the shadow tables. As soon as the data is copied, the system creates indexes and the original table replaces the shadow table. After the reclustering request has been successfully completed, both fact tables exist in their original state (name of shadow table) as well as in their modified state with the new clustering schema (name of original table).
    You can only use reclustering for InfoCubes. Reclustering deactivates the active aggregates of the InfoCubes; they are reactivated after the conversion.
    Reclustering DataStore Objects
    Reclustering completely converts the active table of the DataStore object. The system creates a shadow table with a new clustering schema and copies all of the data from the original table into the shadow table. As soon as the data is copied, the system creates indexes and the original table replaces the shadow table. After the reclustering request has been successfully completed, both active tables exist in their original state (name of shadow table) as well as in their modified state with the new clustering schema (name of original table).
    You can only use reclustering for standard DataStore objects and DataStore objects for direct update. You cannot use reclustering for write-optimized DataStore objects. User-defined multidimensional clustering is not available for write-optimized DataStore objects.
    Pls chk this thread:
    Shadow Table?
    http://help.sap.com/saphelp_nw2004s/helpdata/en/47/5cf74153b6ca17e10000000a155106/content.htm
    Hope this helps,
    Reward points...

  • Regarding not being able to make an in-app purchase: all it says is that i can't make In-app purchases at this time.

    regarding not being able to make an in-app purchase: all it says is that i can't make In-app purchases at this time. Any suggestions? I'm new to the apple world. I just switched from an Android today.

    Contact iTunes store support for this. Go to http://www.apple.com/support/itunes/contact/ and click the blue link next to the green shopping bag. Follow the steps and send them an email explaining your issue.

  • Regarding Notes Plus

    Regarding Notes the app, I had over 30 notes and they all dissapeared? I have no idea what happend to them? Can anybody heló me?

    I would recommend contacting the developer as he may be able to help (I have gotten in touch with him a few times and it has helped me). Anyways, have you checked trash? I am assuming it is a problem with your database file which the dev may be able to restore. Again, contact him here.

  • Needs Clarification Regarding Listener.ora file

    I want a clarification regarding listener.ora file I've Listener.ora file and its content look like as:
    # listener.ora Network Configuration File: C:\oracle\product\10.2.0\db_1\NETWORK\ADMIN\listener.ora
    # Generated by Oracle configuration tools.
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = PLSExtProc)
    (ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
    (PROGRAM = extproc)
    (SID_DESC =
    (GLOBAL_DBNAME = Oracle8)
    (SID_NAME = ORCL)
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 10.10.10.10)(PORT = 1521))
    I can understand every entry in this file accept the following
    *(SID_DESC =*
    *(SID_NAME = PLSExtProc)*
    *(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)*
    *(PROGRAM = extproc)*
    *(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))*
    Although rest of entries refer to network services(Database name) and host address and protocol etc.
    what these above refere to.
    Please clarify me in this.
    Regards,
    D.Abbasi

    (SID_DESC =
    (SID_NAME = PLSExtProc)
    (ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
    (PROGRAM = extproc)
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    that about External Procedure, If you don't use "External Procedure" you can remove it, by the way you should avoid default configure.
    http://download.oracle.com/docs/cd/B19306_01/network.102/b14212/advcfg.htm#sthref1331
    http://download.oracle.com/docs/cd/B19306_01/network.102/b14212/advcfg.htm#NETAG0132
    http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14251/adfns_extern_proc.htm#sthref1658
    Sample create External Procedure:
    http://surachartopun.com/2008/07/create-and-run-sample-external.html

  • Some clarifications regarding Aironet settings

    Hi,
    i need some clarifications regarding configuring Aironet stand-alone AP (in this case AIR-LAP1131AG).
    Under Security->SSID Manager:
    what is the purpose of Network ID?
    Under Guest Mode/Infrastructure SSID Settings - what is the purpose of Set Infrastructure SSID?
    and Force Infrastructure Devices to associate only to this SSID?
    Cheers,

    Assign a Service Set Identifier (SSID) to each VLAN configured on the AP. SSIDs enable endpoints to select the wireless VLAN they will use for sending and receiving traffic. These wireless VLANs and SSIDs map to wired VLANs. For voice endpoints, this mapping ensures priority queuing treatment and access to the voice VLAN on the wired network
    For further information click this link,
    http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/4x/42nstrct.html#wp1098806

  • I have questions regarding notes section , like how I write notes and they end up my my wife's phone !!!!!!

    I have questions regarding notes section , like how I write notes and they end up my my wife's phone !!!!!!

    Yes, as Josh P said, I can see that happening if you sync with iTunes on the same Computer and the same mail account.  Under the info section, advanced, I bet notes is checked for both of the devices..everything else might be un-checked, but notes might be checked for both devices...

  • HT1212 where do i go to get started with the disabled phone process.  I selected the information regarding not syncing into itunes ever.  but where do I go on the site to get started

    where do i go to get started with the disabled phone process.  I selected the information regarding not syncing into itunes ever.  but where do I go on the site to get started

    You use iTunes and restore the phone from Recovery Mode. You will lose all content. http://support.apple.com/kb/HT1808

  • Needs Clarification Regarding Segments and Datafiles

    Hi,
    I want clarification regarding Segments, Datafiles and extents.
    As we know that A segment is made of one or more extents and extents are composed of one or more datablocks in the HD.
    Since all data are store in Datafiles which are composed of extents and datablocks. I want to know weather a table(Segment) can span to multiple datafiles or in a sigle datafile.
    Regards,
    D.Abbasi

    And an easy way to check it by yourself :
    SQL> create tablespace abbasi_tbs
      2  datafile 'E:\ORADATA\DEMO111P\abbasi_01.dbf' size 1m autoextend off,
      3           'E:\ORADATA\DEMO111P\abbasi_02.dbf' size 1m autoextend off;
    Tablespace created.
    SQL> create table abbasi_tbl (id number)
      2  tablespace abbasi_tbs;
    Table created.
    SQL> insert into abbasi_tbl
      2  select rownum as rn
      3  from   dual
      4  connect by level <=10000;
    10000 rows created.
    SQL> commit;
    Commit complete.
    SQL> select distinct file_id
      2  from   dba_extents
      3  where  segment_name ='ABBASI_TBL';
       FILE_ID
             6
             7
    or...
    SQL> select distinct DBMS_ROWID.ROWID_RELATIVE_FNO(rowid)
      2  from   abbasi_tbl;
    DBMS_ROWID.ROWID_RELATIVE_FNO(ROWID)
                                       6
                                       7
    SQL> select file_name from dba_data_files where file_id in (6,7);
    FILE_NAME
    E:\ORADATA\DEMO111P\ABBASI_01.DBF
    E:\ORADATA\DEMO111P\ABBASI_02.DBF
    SQL>Nicolas.
    added the ROWID function usage
    Edited by: N. Gasparotto on Jun 21, 2009 11:02 AM

  • Need clarification regarding select query

    Hi,
    I need a little clarification regrding a Select senario
    I want to select data from table which have been minupulated between a certian date like between 1-DEC-10 to 31-DEC-10 and note that table does not have any time/date column. I've applied the following query to do this.
    select * from TABLE_NAME where sysdate between to_date('01-DEC-10') AND to_date('31-DEC-10');
    Would it work fine because I've tried it against a table and it returned me nothing however DML occur between time period.
    Regards,
    Abbasi

    Abbasi wrote:
    Hi,
    I need a little clarification regrding a Select senario
    I want to select data from table which have been minupulated between a certian date like between 1-DEC-10 to 31-DEC-10 and note that table does not have any time/date column. I've applied the following query to do this.
    select * from TABLE_NAME where sysdate between to_date('01-DEC-10') AND to_date('31-DEC-10');
    Would it work fine because I've tried it against a table and it returned me nothing however DML occur between time period.
    Regards,
    AbbasiAFAIK without log mining and auditing this is not possible.
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14215/logminer.htm

  • Clarification Regarding Asset Accounting Chart of Depreciation Copy

    Hi,
    We have a company code called ACT
    For that we have a chart of depreciation assigned is ACT
    Number Ranges are 1000000-1999999 (For Example)
    Now we configured one more company code called RNC by Copying ACT company code and other settings from ACT company code only.
    Clarification required - In Asset Accounting for Company code RNC we are plannint to assign chart of depreciation ACT as it is.
    If we do like that - System will take the number ranges from the above ACT number ranges 1000000-1999999 ? or else system will take 1000000-1999999  number ranges from RNC company code? This is my doubt?
    I think system will share the 1000000-1999999  number ranges in Asset accounting for both company codes ACT & RNC as we are using Same ACT chart of depreciation for Both company codes.
    If we assign Same chart of Depreciation to both ACT and RNC company codes - Is it necessary to do any other configuration or no need to do any?
    Kindly clarify my doubt
    Thanks
    Supriya

    Hello,
    Make sure that the both the company codes are in a single country before assigning the same chart of depreciation.
    The number range of assets are defined at company code level. Meaning that you can have the same asset number in different company codes. The system will not share the number ranges across company codes.
    Regards,
    Ravi

  • Clarification Regarding Logical System Names

    HI all,
    I read the blogs regarding Logical System Name, even I am having the some problems in my system.
    For PI system client is 100.
          R/3 System Client is 100 is created.
    IN PI when I checked the sale->basic setting-> LOgical Settings-> Assign Logical Systems
    I found there is only one client 100, and it is having the same logical system name as 'PICLNT100'.
    In SLD one Business System is created for Client 100 and having the Logical System Name is 'PICLNT100'.
    When I checking in the R/3 system that logical system Name ('PICLNT100')  is not there  and for r/3 client 100 having the different logical system name.
    IN ID when I found the Goto ID->File Buinsess system and Menu ->Services->Adapter Specific Identifiers->Logical Ssytem,
    It is different from the SLD logical System Name.
    How Can I know in PI, that Logical System is belongs to r/3 or PI client 100,
    when I running the sceanrio it is giving error as ATTRIBUTE_INV_SND_SERV while doing the file to Idoc scenario.
    How I have to maintain the logical system names in this case?
    please help me in this.
    Regards,
    Sree

    hi.
    each r3 system has his own SLN (PI,BI,ECC,etc). this name identify each R3 sytem.
    http://help.sap.com/saphelp_nw04/helpdata/en/78/217dc151ce11d189570000e829fbbd/frameset.htm
    IN ID when I found the Goto ID->File Buinsess system and Menu ->Services->Adapter Specific Identifiers->Logical Ssytem,
    to export data of your R3 system to SLD, just do it from TCODE RZ70 in your r3 system, not PI.
    once you configure it all data from r3 system is exported to SLD.
    if the SLN does not match in Adapter Specific Identifiers->Logical Ssytem, edit the Bussines System (press in the little pencil) go to Adapter Specific Identifiers->Logical Ssytem and prees in the little hand icon. in the SLN in not refresh, go to menu enviroment--> CLEAR SLD DELTA CACHE. and repeat the steps before.
    each time you send data to an R3 system and the sender system is a legacy. in your receiver communication channel>header mapping>sender system--> select the PI Bussines system and try again.
    hope its helps
    Rodrigo
    PD: rewards points if useful

  • Clarifications regarding Logistics Invoice Verification

    Hi SAP Gurus,
    I just wanted to confirm with you something that I noticed regarding the behavior of SAP MM LIV:
    1. It seems that for purchase orders with Account Assignment, you can change the Account Assignment Category in the LIV process. Say for example, I had a PO line item charged to a Cost Center; however, upon LIV, I can change the charging to say an Asset instead. I was just wondering why would SAP allow such transaction/s to happen? Wouldn't it compromise the integrity of the whole document trail (PO account assignment is different from the LIV)?
    2. Is there a way to edit the Account Assignment for a Purchase Order line item even if that item has been fully received and invoiced? I checked with the standard test system that I have at the moment and I observed that you can still edit the other PO details (quantity, price) even though the PO line item has been fully GR'ed and LIV'ed. However, the Account Assignment field is set to Display only. I checked the field selection for purchase orders and found no connection (the Account Assignment field is set to optional for all relevant factors)
    Hope to hear from you soon!
    Best regards,
    DeLo

    Hi Delo,
    Please find answers to your queries below in bold.
    1. I was just wondering why would SAP allow such transaction/s to happen? Wouldn't it compromise the integrity of the whole document trail (PO account assignment is different from the LIV)?  -
    There could be some business scenarios in some organisations, where in Procurement team uses generic cost centre (header), which is specific to particular department or group, to procure. But at the time of Invoice Receipt, AP team knows exact cost centre or order, etc  to post the amounts. To cover these kind of scenarios, SAP probably has provided the option to change acount assignment.
    2. Is there a way to edit the Account Assignment for a Purchase Order line item even if that item has been fully received and invoiced? -
    These field changes at various levels can be configured via t-code OME9.
    a) IR Changeable - This field if selected will allow to change the account assignment of a purchase order item at the time of invoice receipt.
    b) Acct. assg. changeable - This field is selected will allow to change account assignment for an item following goods receipt or invoice receipt.         
    Hope this clarifies your queries.
    -Ravi

  • Clarification regarding WLC 's interfaces

    Hi Netpros,
    I am about to deploy WLC and LWAPP solution. I have only done Autonomous set up in the past and so would appreciated some clarification regardig the below points:
    1.- switch port connected to LWAPP access points must be an access port (not trunk) correct ?
    2.- switch port connected to WLC 44+ must be a trunk (assuming I need to map SSID to different vlans) correct ?
    3.- WLC 44+ port can only be connected to a gigabit port .. so I can't change its speed in order to connect it to a fastethernet port .. correct ?
    4.- What exactly is Management interface, service port, AP manager ..etc so many names I am getting confused.
    5.- What is layer 2 and layer 3 mode .. I am also confused here.
    6.- If I want all my LWAPP access points on vlan 10 (for argument sake) .. which WLC's interface do I need to place on vlan 10 in order for the access points to register ? I want to have LWAPP and WLC on the same vlan but with so many inteface names I don't know which one I have to use (AP manager ? perhaps )
    7.- If I want SSID 1 (vlan 11), SSID 2 (VLAN 22). How do I configure the WLC interfaces (which one do I need to use .. create ..?) so that clients using SSID 1 can communicate on its respective VLAN 11
    8.- Microsoft IAS and PEAP .. do I need to set up every access point as radius client ? or do I only need to configure the WLC as radius client .. and if so which WLC interface's IP address do I need to use on the radius server (IAS)
    I apologize for so many questions and really appreciate your feedback which - as always - I am sure will make things clear.
    Cheers,

    1.- switch port connected to LWAPP access points must be an access port (not trunk) correct ?
    (A) Correct, Cisco recommends no more then 70 or so APs per VLAN. You can do more then 70 and in fact put all of your APs in the same VLAN. But if the controller ever goes dark it could take a bit longer for the APs to join.
    2.- switch port connected to WLC 44+ must be a trunk (assuming I need to map SSID to different vlans) correct ?
    (A) Yup yup. You can truck the switch or Echannel it and use LAG on the controller.
    3.- WLC 44+ port can only be connected to a gigabit port .. so I can't change its speed in order to connect it to a fastethernet port .. correct ?
    (A) Yup yup. again. GIG only. Wont connect otherwise.
    4.- What exactly is Management interface, service port, AP manager ..etc so many names I am getting confused.
    (A)
    Manager is the IP address you will use to manage the controller. Its the way the controller see's the world.
    AP Manger is used for the APs to phone home to. This interface is not pingable. Nothing special with this interface.
    Service Port ... think about out of service management for the WLC. Suppose you lose network connection to the WLC manager interface. You can jack right into the service port. I have also put this on the network before so you can still access the WLC remotely.
    5.- What is layer 2 and layer 3 mode .. I am also confused here.
    (A)
    Layer 2 --- Think about deploying your entire WLAN on one subet. So your APs and WLC are all in the same subnet.
    Layer 3 -- This is used when you have your APs on other subnets ect..
    You can actually console into the LWAPP ap during the join process. you will see the AP send a 255.255.255.255. This is a join attempt by the AP to find a controller on its subnet.
    6.- If I want all my LWAPP access points on vlan 10 (for argument sake) .. which WLC's interface do I need to place on vlan 10 in order for the access points to register ? I want to have LWAPP and WLC on the same vlan but with so many inteface names I don't know which one I have to use (AP manager ? perhaps )
    (A) The beauty of the WLC is you dont have to have the APs on the same VLAN as the controller, unless u are layer 2. The access layer teh APs are on just need to be routable to the AP interface.
    7.- If I want SSID 1 (vlan 11), SSID 2 (VLAN 22). How do I configure the WLC interfaces (which one do I need to use .. create ..?) so that clients using SSID 1 can communicate on its respective VLAN 11
    (A)
    You map the SSID to VLAN under the WLANs tab. You Create the wired side info (VLANS) under the controller tab
    8.- Microsoft IAS and PEAP .. do I need to set up every access point as radius client ? or do I only need to configure the WLC as radius client .. and if so which WLC interface's IP address do I need to use on the radius server (IAS)
    (A) Advantage of the WLC, you use the WLC as the client to a Raduis server. The management address..
    I apologize for so many questions and really appreciate your feedback which - as always - I am sure will make things clear.
    Cheers,

  • Clarification regarding GO LIVE

    Dear all,
    I need a Clarification required regarding GO LIVE PRODUCTION server
    The client wants to upload available opening data in SAP and work parallel in both existing ERP and SAP as well.
    At the end of 2nd Qtr, They want to compare data in both the systems and want to reset the data in SAP for any differences in data.
    For example we can reset the stock through physical inventory process.
    Like wise can we reset the G/L account balances in SAP so that the client can continue only with SAP there after?
    Balance sheet will be taken in existing system for 1st 6 months and in SAP for next 6 months.
    Is this practice RECOMMENDED or do we have to set up new production client for the next six months?
    Please suggest.
    Thanks & Regards,
    AR

    Hi,
    The client needs a benchmark to understand the transactions in SAP goes well.
    At the end of the Quarter they would take balance sheet in both the SAP system and the Legacy system and compare them.
    If both of these match, thats great..
    If there are any differences, they would then need to understand why these differences are.
    Inorder to balance both of these, they would need to pass journal entries into the respective ledgers..
    The main problem would be for them to post the documents in both of the systems parallely.
    Hope your doubt is cleared.
    Cheers
    Raghu

Maybe you are looking for