Clarification request -- CC Photographers plan

So this includes CC Photoshop, but what does it actually include for LR?
(I could not find this addressed elsewhere).
All the notes from Adobe say
CC Photoshop and "access to Lightroom 5"
(the quotes are mine).
Does that mean we get the CC Photoshop subscription, but only LR5? not the future upgrades to LR6/7/...???

Thank you -- I don't find the FAQ at all clear, and it does not reference Lightroom and the word "upgrades" only occurs in another context.
I understand then when I get Photoshop-CC its not a specific version, but the ongoing.
But all references to LR say specifically "access to Lightroom 5".
So just to be 100% sure -- if I buy into this photographers package (which I purchased as Photoshop-CC months ago), I get Lightroom with its ongoing upgrades, not just Lightroom-5??

Similar Messages

Error when Display/Print my expense report,travel request and travel plan

Hello experts,
I had configurated the ADS and ESS successfully.We are using ESS and interactive form now.
And we had developed some interactive form and they work fine .
In page "My Trips and Expenses   " , there are 4 tabs " All My Trips"," My Travel Requests"," My Travel Plans " and " My Expense Reports " .
When I selected one row of table and click button " Display/Print" , I got the error :
com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentRuntimeException: Failed to USEPDF
     at com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentRuntimeException.<init>(PDFDocumentRuntimeException.java:25)
     at com.sap.tc.webdynpro.clientserver.uielib.adobe.impl.InteractiveForm.afterHandleActionEvent(InteractiveForm.java:419)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.afterApplicationModification(ClientApplication.java:1132)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.afterApplicationModification(ClientComponent.java:895)
Caused by: com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: pdfSource of InteractiveForm UI element should be populated with pdf binary content in USE_PDF mode
     at com.sap.tc.webdynpro.clientserver.uielib.adobe.impl.InteractiveForm.afterHandleActionEvent(InteractiveForm.java:351)
     ... 48 more
Is there any guys had met the problem ? Please give me some suggestions .
Thank you !
Best Regards,
Louis

Louis,
can yo make sure that you are doing this "pdfSource of InteractiveForm UI element should be populated with pdf binary content in USE_PDF mode"
check these links
https://forums.sdn.sap.com/click.jspa?searchID=18701125&messageID=6070514
https://forums.sdn.sap.com/click.jspa?searchID=18701125&messageID=6426445
https://forums.sdn.sap.com/click.jspa?searchID=18701125&messageID=6323600
Thanks
Bala Duvvuri

In-House Product Clarification Request

I came across this term "In-House Product Clarification Request" recently. However, I am not sure what this is. Can anybody clarify or provide some useful information? All I know now about this is that this is a type of General Notification.
Thanks in advance,
APS

InHouse Product Clarification is a request sent from the Shop Floor to the Engineering and Design to report a problem pertaining to a product. The said product is usually an intermediate product used ina a stage of production and this product is responsible for some problems ocuuring at the shop floor.
The IHPCR is sent to the Engineering and Design division reporting the issue and seeking a clarification on the desing or behaviour of the said product.
If there is a fault with the engineering of the product, IHPCR is typically followed by an Engineering Change Request (ECR).

Photographers plan and selling images created from them

I have been searching some time now to find an answer but I can't find anything conclusive,
In our country (the netherlands) you can have a 'company' as a person (The person is the company and the company is the person, no difference at all only an added company name to your entity but non the less privately liable etc.), for this, the bussiness plans offered by Adobe may be a bit too much if you only need Photoshop. In my case the CC Photographers plan looks very nice and useful. Because you have a company with only an owner in it and no other staff, it seems that the Photographers plan seems compatible due to the one license per person (individual). But now comes the tricky part:
In the EULA it states that Service Bureaus can't use the software commercially. This is a bit unclear to me, because in the Netherlands every company that provides a service (taking photos and sell them, creating designs for websites or other media) is being considered as a service bureau/company.
So I have a few questions and I hope a staff member will answer this question as I have seen some answers on the forum but by other users (they do not know for sure) it is just as a gamble as not asking this question at all.
Can I use the photographers plan, in the Netherlands, and sell everything I create from it or use that I create from it in other commercial product such as websites, mobile apps and games?
What exactly is the definition of a servicebureau according to Adobe as described in the EULA's?
I hope you guys can answer this for me because I really want to use Adobe Photoshop in my workflow but I do not want any issues or problems later.
With kind regards,

I have been searching some time now to find an answer but I can't find anything conclusive,
In our country (the netherlands) you can have a 'company' as a person (The person is the company and the company is the person, no difference at all only an added company name to your entity but non the less privately liable etc.), for this, the bussiness plans offered by Adobe may be a bit too much if you only need Photoshop. In my case the CC Photographers plan looks very nice and useful. Because you have a company with only an owner in it and no other staff, it seems that the Photographers plan seems compatible due to the one license per person (individual). But now comes the tricky part:
In the EULA it states that Service Bureaus can't use the software commercially. This is a bit unclear to me, because in the Netherlands every company that provides a service (taking photos and sell them, creating designs for websites or other media) is being considered as a service bureau/company.
So I have a few questions and I hope a staff member will answer this question as I have seen some answers on the forum but by other users (they do not know for sure) it is just as a gamble as not asking this question at all.
Can I use the photographers plan, in the Netherlands, and sell everything I create from it or use that I create from it in other commercial product such as websites, mobile apps and games?
What exactly is the definition of a servicebureau according to Adobe as described in the EULA's?
I hope you guys can answer this for me because I really want to use Adobe Photoshop in my workflow but I do not want any issues or problems later.
With kind regards,

Can I cancel my monthly Creatve Cloud membership and then sign up for the Photographers Plan?

I have had the Creative Cloud Membership since it was first offered. I use only Photoshop and want to change to the less expensive Photographers Plan. Is this possible?

Hello Tamera,
here are two links where you can cancel the membership:
http://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html and maybe
http://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting- creative-cloud.html
If necessary and for further questions click through http://helpx.adobe.com/contact.html and if "open" please use chat, I had the best experiences. I quote from Adobe's employee Preran: The chat button is activated as soon as there is an agent available to help.
On the other hand you have to look at Subscription Terms >>> http://www.adobe.com/misc/subscription_terms.html to see the conditions for a (early) cancellation.
After that procedure you can conduct your other membership.
Good luck!
Hans-Günter

SAP JIT Inbound - The external status change you requested is not planned

Hi All,
I am getting an error as "The external status change you requested is not planned" while creating JIT call in JIT inbound.
I have configured actions and external status.
What would be the problem??
Help me
Thanks,
Anbazhagan

Hi Lakshmipathi,
Thanks for your reply.
I missed out some configuration. Now the issue is solved.
Thanks,
Anbazhagan E

Unable to release transport request for modified Planning book from Dev Sys

Hi All
can someone advice on this:
We have included a new key figure to our existing Planning book, which is already defined in Planning Area. This key figure is just getting shipping data for comparison and is not having any impact on macros also. We inserted key figure and set the attributes as output only and all looks good in Development system. But when we created transportation request and trying to release request it is giving error "Test Call of transport control program (tp) ended with return code 0208" Message no: TK094
can any one advice on this
KV

Hello,
Please check with Basis team. I think this is not related to planning book that you are trying to export. A look in the message text gives the following:
Check the following points:
Feasibility of the transport control program tp
Parameter settings in the transport profile
Availability of the transport directory and the subdirectories (cofiles, data, log, sapnames, bin)
Write authorization for the subdirectories
Write authorization for the files of the subdirectories cofiles, data, log, sapnames
Release the request again when the error has been removed.
Hope this helps.
Warm regds,
Ashutosh

Service Requests and Collection Plans

I'm experimenting here just a bit... and I wondered. Is it possible to map a Service Request Type to a Collection Plan. Seems logical functionality to me, but I couldn't find it anywhere...

Work Item is an abstract class, and can't be extended for implementation reasons.
i think Anders has understated the difficulty of combining these views: this is a bit like saying "show me all the orange things, given this bucket of cats and this bucket of fruit" yes, they are both "orange", but fur is not the same
as fruit rind; they're not the same "orange".
the 2010 Service Request implementation was never intended to be a serious use case (i assume you're talking about the SCSM Service Request demo implementation on codeplex), it was intended
to be a demo of what you could do with the form and object interfaces.
The solution here should be simple, convince your client that their solution has been replaced by a newer, better version, Resolve Close and then deprecate these requests, and start reporting only the new type requests. these are history, and dirty data,
and should be ignored.

ASM - Concept - Clarification Request

Hello All,
I'm about to go ahead and install ASM for one of my clients. After going through the book ASM - Under the hood, I have a few clarifications, which I hope can be answered by the experts here.
1- Since ASM uses its our algorithm for mirroring - Can I have an in-pair number of disks in +DATA diskgroup? say 11 disks ?
2- In regards to Failure Groups, what is concept? Say I have 1 diskgroup +DATA - 4 disks - does failure groups mean that id Disk 1 goes, then move the primary extents to another disk, say disk 3.
- Can failure groups be in different diskgroups, lets say failure group for DATA disks, would be disk in RECOVERY ?
- Or are failure groups additional disks which just sit there and are activated if case of a disk failure
3- On installation, ASM 10gR2, are there any things a firs timer should watch out for.
4- Should I have a hot spare disk on a 15 disk array Dell MD1000 - is this really necessary - why? if one disk goes bad, then we can simpy change it. Does this make sense if I have 4 hour gold-support on site with a new disk?
Thank in advance for any assistance.
Jan

1. Yes, ASM will determine the most suitable block mirroring strategy regardless the number of disks in the diskgroup.
2. Failure groups affect how ASM mirrors blocks across them. By default, each disk is in its own failure group - it is assumed that each disk can fail independently of others. If you assign two different disks to the same failure group, you indicate that they are likely to fail together (for example, if they share the access path and controller for that access path fails,) so ASM will only create single mirror on them and will try to create another mirror in another failure group. For example, you assign disk1 and disk2 to the same failure group: ASM will never create a mirror of a block from disk1 on disk2, it will only mirror to a different failure group. Note that if your storage is already RAIDed, EXTERNAL redundancy diskgroups are pretty safe: hardware RAIDs are usually more efficient than NORMAL redundancy ASM groups while maintaining the same level of protection, thanks to hardware acceleration and large caches they sport these days.
3. Not really, as long as you follow the documented procedures and have Oracle patched to the current patchset level. However, if you employ ASMLIB, there might be issues that differ by the storage vendor.
4. If you are sure that no other disk will fail within those 4 hours, hot spare is probably not that necessary. If availability is of concern, always plan for the worst case though. Having hot spare will protect you from such second failure while the replacement is en route.
Regards,
Vladimir M. Zakharychev

I want to unsubscribe from CC but re-subscribe to the photographers plan (LR and PS for 9.99/mo. Website runs me around in circles. Can't cancel CC; just get contact support popup.

Hi there.
I think the title says most of what my issue is. I'd like to get on a chat with a rep to straighten this out but evidently this isn't an option? Any advice? Adobe will bill my acc't tomorrow for CC and I'd like the switch to happen before that.
Thanks for any help or advice.
Bill

Billscheider I apologize for the inconvenience from our planned maintenance. I would encourage you to contact our support team Sunday afternoon PDT to request that your subscription be updated. Please feel free to contact me directly if you face any difficulties with the process once our maintenance has been completed. You can find more details at Creative Cloud Maintenance Scheduled for this Weekend | Adobe Customer Care Team.

Urgent - Travel Requests and Travel Plans

Hi all
I am new to Travel and after reviewing the configuration notes and walking through the transactions I have an issue with what the business is requiring and what SAP travel management seems to be designed for.
The requirement is to create either a plan or request for travel including airline, times, hotel and car rental and times etc. but without going through Amadeus or another reservation system. The aim was to create the plan/request and then send the request as a pdf to our current travel management company.
I am having difficulty in specifying the airline or the flight times...
Any and all help will be much appreciated.
Regards
Chris

Hi Guys,
Any help on this?
Thanks

I'm currently paying for a Creative Cloud photographers plan but I'm stuck with a free trial, how can i license it when it asks for a serial?

I've paid for Adobe Creative cloud photographers package under a monthly subscription but i'm currently only getting access to the free trial as I can't seem to license the software, when I go to license it as instructed by Adobe I'm still asked for a serial number? When I check my Adobe account it shows no sign of any pain subscription yet they seem to be taking money from my account? I can't seen to find a means of taking it up with Adobe directly as I either want a refund of full access to the software i'm paying for.

If you are being prompted to enter your serial number when opening your actively subscribed Creative Cloud application then there maybe missing account information. Please see Creative Cloud products prompt for serial number on launch | CCM - http://helpx.adobe.com/creative-cloud/kb/ccm-prompt-serial-number.html for additional information.
In addition if you are facing difficulties reaching the activation server please see Sign in or activation errors | CS6, CS5.5 Subscriptions, CS6 Perpetual - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html. Also if you are managing a network please see the Adobe Creative Cloud Service Access Documentation for IT section ofhttp://www.adobe.com/devnet/creativesuite/enterprisedeployment.html.
Finally for additional information on managing your Creative Cloud account please see Manage your membership | Creative Cloud - http://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting- creative-cloud.html.
Creative Cloud applications unexpectedly revert to trial mode | CS6, CCM
Regards
Rajshree

I have paid for Creative Cloud membership Photographers Plan but only 2gb storage is showing in my apps

Why is only 2gb Storage showing for my Creative Cloud account when I have paid for the Photography plan and should be entitled to 20gb?

The new Creative Cloud Photograph plan and Photoshop Photography Program are two different plans with different entitlements. The Photoshop Photography Program was a limited time offer and the Creative Cloud Photography plan is a permanent offering.
Why are the offerings in Creative Cloud Photography plan different from the Photoshop Photography Program? For example, the new plan has 2 GB of storage when PPP offered 20 GB. Also, the original PPP offering provided users with a Behance pro membership, which CCP does not.
Are you sure you do have the old program? Can you check on your order...

Need Clarification - Request Bean vs Session Bean?

Could someone clearify to me the difference between a Request bean and Session bean and when to use which one.
In a netbeans Visual Web Project I notice that the backing beans or code behind files that the web pages use are request beans but there is also a Applications Bean, Session Bean, and Another Request Bean.
What type of logic should be going where in terms of the jsp's request bean, the single session bean, and single request bean?
A few years ago when I was in school we created regular Web projects that used session beans as the backing beans which handled all the logic and passed data to and from a EJB layer which did all the Database connectivity.
And finally where do EJB fit into this style of Visual Web Projects?
Thanks,

So in terms of where certain types of logic goes I would so something like this login example:
User clicks a Login button, this is bound to the RequestBean, the request beans checks the session bean if user is logged in, if no then use a EJB to validate against DB, return true/false. Set user login state in the session bean? That a proper flow and useage of the different types of beans?
When all is said and done the request bean would be used to forward off actions fromt he jsp to wherever they need to go?
Edited by: avalanche333 on Jun 6, 2008 11:37 AM

KDE Installation Method Clarification Request

I've read the wiki and articles about the relative merits/demerits of installing KDE using groups, or meta packages. I understand the implications of receiving updates for both paradigms.
I've installed KDE using both methods. Each install was with a complete rewipe of my system drive so everything is fresh, and of course current with a pacman -Syu.
For my personal purposes, I find that either method installs too much other stuff.
I see the KDE wiki on how to install the bare KDE essentials, and then I'd like to bring down the packages one at a time based upon need. So from my current understanding, I'm neither using groups, nor meta-packages, but individual items.
I ask the following questions for clarification:
a) Using my proposed method, how will my individual KDE packages and/or their dependencies receive updates through pacman?
b) Has anyone gone down this road before and have "gotchas" or issues they'd like to make me aware of before I do my new layout?
Thank you for your time!
Dave..........
Last edited by dcbdbis (2011-05-19 19:18:21)

I don't know what the kde wiki names as bare essentials, but i followed a top down approach to keep the KDE stuff to a minimum :
I installed the applications i needed and accepted the dependecies that came with it.
example :
Krusader is my favorite filemamager, this requires kdebase-runtime
kdebase-runtime requires kdelibs
kdelibs requires phonon
phonon requires a backend, i choose phonon-vlc
phonon requires qt
1 'pacman -Syu krusader' installed 90% of what i need from kde, installing other apps installed a bit more.
By doing it this way, i can be certain i only have those KDE pacakages that are important for my use of the system.
About your question a :
as long as you use the official arch repos, you'll get all updates that are available.
KDE releases (normally) include all packages they have in the 'Software Compilation' as they call it.

Clarification request -- CC Photographers plan

Similar Messages

Maybe you are looking for