Clarifications in picklist output type EK00 for transaction VL02N

Hi evryone,
Can anyone please help me to generate a smartform for picklist output type EK00 for Tcode VL02N. In application V2 the standard program is RVADEK01 and the form SD_PICK_SINGLE,
what is the best way to create smartform and driver program , can I use the Standard Program or write the new driver program..
with regards,
Mittu

I dont think this is the right forum to post such question. This should have been posted in ABAP forum
thanks
G. Lakshmipathi

Similar Messages

Output type problem for transaction MRKO

Hi,
Transaction mrko should create invoice & post invoive document to spool.
When i execute the transaction with mat doc i can see invoice document created but cant see layourtin spool.
But i can see layout when i execute mr91 output message types with processing mode 1 (processed without error).
Layout is processed without error but not in spool why?.
Similar transactions mrrl, mris when i execute i can see layout in spool but not mrko.
Pls suggest guys what to do to see layout in spool.
Thanks for all your help in advance.

Hi,
Can any one tell me whats the use of MR90 MR91 Transaction?
Also in that processing mode..
Much Awaited for your answer.
Thanks

Clarifications in pick list output type EK00

Hello ,
Have any one of you used the pick list output EK00 . I have
tried this and I do have some issues with
We are using SAP R/3 4.7 x 200 version .
Output type EK00 is not available in the application V2 (
Shipping ) . Its available in application V4 (Shipping special
case).
1. I have assigned the shipping points through T code VOK2 as I
am not able to find the output EK00 through customization menu.
2. I have maintained the printers details through VP01SHP ( correct me if I am wrong) . I am using the standard program RVADEK01 and form
SD_PICK_SINGLE in the output EK00.
After doing the above setting when I am creating delivery in
VL01N , the output type EK00 is not assigned automatically and
when I try to assign it manually , it gives an error message
"Processing program missing for output EK00 (medium 1)in
application V2" . I dont know why the system is looking for
application V2 when it is not available in V2 and only available
in V4 .
Am I missing anything in my process . Can some one help me in this .
With regards,
Joseph Anand.B

Dear Joseph,
Have you done the following setting in transaction v/38:
1.On the Display View "Output Types": Overview screen, in the Output type group box, select EK00. (Application V4)
2.In the left frame, under Dialog Structure, double-click on the Processing routines folder.
3.On the Change View "Processing Routines": Overview screen, choose .
4.In the first medium, for Print output, enter the Smart Form print program /SMB40/RVADEK01 under Program and Smart Form /SMB40/SDPIK_L under SmartForm.
Document Types        Picking List
Output Types          EK00
Transaction Code      v/38
Smart Form Program    /SMB40/RVADEK01
Smart Form            /SMB40/SDPIK_L
                      /SMB40/SDPIK_A
5. Save the changes.
Regards,
Naveen.

Output type EK00 pickng list error

hi all,
while issuing a delivery doc to o/p in vl02n. i get a message 'output cud not be issued'. i have chckd all cond recodrds and config is in place. we are using SAP script for this purpose. the processng status is also 2 tht is 'incorreclty processed'.
plz guide.
thnx in advance
saurabh

hi manoj,
thnx for the reply. i need some more clarifications. wen i go to vg01 and choose the grp 'k' for picking and assign Ek00 to it, i got a message that ek00 is not defined in application v5- grps. i created a new o/p type ek00 for v5. i have assigned the delivery number to the grp too. but am still getting the same issue. on analysing the issue futher i get a mssg ' An error occurred in the message processing program'. how do i proceed.
saurabh

Update LIKP table while saving the output type in VT02N transaction

Hi All,
I have a requirement where i have to update Delivery Priority(LPRIO) field in LIKP table while saving the output type in VT02N transaction. I am not able to use the BAPI "BAPI_OUTB_DELIVERY_CHANGE" or FM "WS_DELIVERY_UPDATE" because, when we save the output type the programs that are configured in NACE are triggered in update mode and hence i will get a roll back error.
Let me know other ways of updating the table at the time of saving output type for shipment transaction VT02N.

This could be a result of one of the following reasons:
1: Incorrect smart form/routine assigned in the output configuration (NACE)
2: Serial number range of the delivery expired
3: The default settings of the user (SU01) processing the delivery is missing the default printer name.
Hope this is helpful
Manish

Hiii friends! how attached output type to a transaction

Hi gurus!
how to attached output type to a transaction.
for eg - i have created a outout type zexpt and i have to assigned to transaction VF01.
Regards,
Rahul

Hi
goto VF02 tcode
fro Menu
GOTO HEADER -> Output
define there
Output is a link between the Driver Program and the Sapscript,
An output type summarizes messages of the same meaning. It contains parameters that are valid for all its assigned messages, for example appropriate partner functions.
Transmission medium is a medium which the layout will be come out, this may be printout, Fax or Mail
Check this link.
http://help.sap.com/saphelp_nw2004s/helpdata/en/c8/19884743b111d1896f0000e8322d00/content.htm
ex-how to config output type.
You will assign output types using Transaction NACE.
Do the follow steps to assign output type
1)Select Application Type V2 which will have description Shipping.
2)Click on Output types button.
3)Go to change mode by pressing Ctrl+F4.
4)Select one output type which already exists
5)Do Copy As(F6)
6)Give your output type against Output Type field.
7)Under General data Tab, Give Program and Form routine and Save the data.
i think it a work of functional guy but at senior level i think it is not a big deal for abaper.
Check the following documentation
In NACE t-codewe have the application for each one. based on the application output type can be defined, based on output type script and print progrma can be defined.
If suppose data can be read from EDI then we should go for condition records.
So whenever we execute the script first composer checks the output type and then execute the program. in program whenever opn form FM will be populate then script will open first. After that again program till another FM will populate if it then script will populate........like it is cycle proces. Composer does all these things and at last it will submit that output to spool.
Go to the Transaction NACE.
choose the related sub module.. like billing or shipping
doubel click on Output Types
Choose the Output Type for which whcih you wanted your script to trigger
Then select the Output Type and double click on Processing Routine
Then go to create new entries--> Select the Medium (1- print output), then enter your Script and Print Program detls --> Save and come out
Now go to the Transaction (for which you have created the output type)... Issue output--> Select the output type --> Print....
Device Types for SAP Output Devices (Detail Information)
Definition
The device type indicates the type of printer to be addressed. When you define an output device, choose the name of the device type that was defined in the SAP System for your printer model, such as Post2 for a PostScript printer. In the case of frontend printing under Microsoft Windows, you can also use the generic (device-independent) device type SWIN.
The system uses the information in the device type to convert a document from the internal SAP character representation (spool request in OTF or in text format) to a device-specific, print-ready data stream (output request). Since a device type specifies attributes that apply to all devices of a certain model, it can be shared among device definitions. For example, all devices in the SAP spool system that are compatible with Hewlett-Packard LaserJet IIID printers would use the HPLJIIID device type.
You should not confuse the device type with the printer driver. The device type is the total of all attributes of an output device that the SAP System must know to control the output device correctly, such as control commands for font selection, page size, character set selection, and so on. These attributes also include the printer driver that SAPscript/Smart Forms (the SAP form processor) should use for this printer. The SAPscript printer driver that is to be used for devices of this type for output formatting is therefore only an attribute that the device type specifies.
How do I choose the correct device type?
In most cases, the SAP System already provides the appropriate device type for the printer type for the printer model that you want to use.
These standard device types are completely defined and need no modification or extension before you use them in device definitions.
You can also download missing device types from the sapserv server. For a current list of the supported device types, see SAP Note 8928 in the SAP Service Marketplace.
Most printers can be controlled using a generic format, such as PostScript. They can be switched to a mode that is compatible with one of the standard printers for which an SAP device type is available. In this case, a supported model is emulated.
Almost all printers are delivered with Microsoft Windows printer drivers. The system can control these printers with the generic (device-independent) device type SWIN. The Microsoft Windows spool system then performs the processing of the print data.
If the specified device types are not available, and generic device types cannot be used, you must create your own device type or edit a copy of an existing device type. We recommend that only those with specialist knowledge of the SAP Spool System and printer driver code do this. For more information, see Defining a New Device Type .
Attributes of a Device Type
A device type is distinguished by the attributes listed below. If you change an existing device type or create a new device type, you must change at least some of these attributes.
Character set: A character set specifies the codes with which characters must be represented in the print-ready output stream (output request). This code replaces the generic SAP characters set that is used internally by the SAP spool system (spool request).
Printer driver: You can specify different printer drivers for printing SAPscript documents and ABAP lists.
Print controls: Print controls represent printer operations, such as boldface or changing the font size. These print control are replaced by printer-specific commands during the creation of the output request from a spool request.
Formats: Formats specify the format supported by the SAP system. The system differentiates between SAPScript formats (DINA4 and LETTER) and ABAP list formats (X_65_132 = 65 rows/132 columns).
Page format: A page format is the interface between a format and SAPscript. It specifies the paper dimensions with which SAPScript can calculate the row and column lengths.
Actions: Actions are output device-specific commands that are required for the implementation of a format. The action printer initialization, for example, can contain a printer command with which the number of rows on a page is defined. There is a set of actions for every format supported by a device type.
Regards
Anji

Output Type ZF01 for Billing Error...

Hi Experts,
I am trying to configure the OUTPUT Type ZF01 for Archiving Billing docuemnts using Application V3. At present output type is configured with all paramenters for archiving and when we are testing that we are facing below error.
File name
OD0NP-WAG040\arch_exch\ is unknown
Message no. SG001
Diagnosis
No entry was found in the conversion table for the logical file name
OD0NP-WAG040\arch_exch\.
Procedure
Add an entry to the conversion table for the logical file name. Maintain the conversion table with the transaction SM30.
We have the above file path configured and it has all access for sap system and users.
We have configured required details in NACE t.code and not sure if there is some thing else we need to take care off, so appreciate your help around this.
--Thanks
Pankaj

Hi,
Is there any report (like RSNAST00) which needs modification in order to make the output type work as required.
Appreciate your quick help around this.
--Thanks
Pankaj

Production Order : OUTPUT Type Configuration for Production Order as EDI

Dear SDN All ,
OUTPUT Type Configuration for Production Order.
Doubt in third Point
We have found the IDoc " LOIPRO01 " for Production Order
(Please confirm that this IDoc can be used for outbound IDoc for Production Order)
And foloowing
1. Defining the Output Type for Particular Application.
 T-Code: NACE
A. Output type have created upder application "ME" description : "Inventory Management"
B. " ZEDI " created for getting output as EDI type
 ZEDI is copied from "WF01" output type. and
 Transmision mediam as "EDI"
 Program : RSNASTED
 Form Routine : EDI_PROCESSING
 (Please confirm is this for IDoc creation)
2. Partner profile creation:
A. Partner profile created under logical system and
B. and In outbound parameter declared as "LOIPRO"(This is for sending the IDoc "LOIPRO01" to XI system).
3. Customization for output type for Proction Order -- (For CO02,CO08) ---
 A. But only one functional customization is remaining to do, for getting the IDoc while saving the Production Order in T-Code "CO02" and "CO08"
 For Example:
 in sales order transaction va02 (in DBI 450 client) and select any Sales order.
 & select following menu path.
 Extras --- > Output -
> Header -
> output
 Here we can set our output type "that U defined in NACE Transaction-Code"
 Like the same way I want to set output type for CO02, CO08 transaction.
But I couldn't find the menu Item in Co02 and Co08 for setting the output.(like VA03)
Please help me out for setting the output type for Production Order Creation.
Thanks in advance,
Dhanabal T
Message was edited by: Dhanabal T

Hello.
I have a similar requirement. Did you guys find the solution?

Picklist Output Type ?

Hi ,
Can anyone tell me where do I maintian the Picklist Output type configuration ?
Thanks,
Kanwar

Hi ,
Are you looking for Tcode : V/34 , Just check .
You need to define the Output type for Picking in V/34 . You can find it from SPRO-> logistics Execution -> Shipping-> Basic Shipping functions-> Output control ->Output determination -> Maintain Output Determination for Outbound Deliveries ->Maintain output types
Then from VK11 you need to maintain condition records for requried access type.
Regards,
sudhi

Output types assignment with transaction codes(MIGO)

We have different output types in system for output determination in inventory management.
eg: WE01,WA01 etc
Now while GR(101) how system will determine which output type it should use.
Suppose I am doing MIGO, then how system determining it should pick WE01 output type?
Is there any configuration setting telling the assignments of different output types to different transaction codes?
Please advice.
Thanks

It is based on the 7th Step in the below steps
Check following are some of steps for GR collective printing from SDN only
1. Maintain the Printer Name in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Printer Setting
2. Ensure that in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
3. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2
4. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for GI/Transfer Posting Documents
5. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WE01, WE02 and WE03, ensure the foll:
a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Tr medium is 1
b. Print Parameter is 7
6. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Pr Det by Pl/StoLoc, maintain the Output device for all your Plants
7. Go to MN21, for Tr Type WE, Print Version 3, maintain Print Item as 1.
Now the settings are ready for Printing Material doc
8. While doing MIGO, ensure that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
9. Now depending on the setting in 5a, the Matl doc is printed. If it is 3, you have to print it using MB90. If it is 4, it is printed immediately.

Using output type ET01 for Material Label

Hello,
We are looking to implement a label for Deliveries through various processes which include manual and MIGO.
We have already implemented the GR label using the output type WEE1, however, we need to implement another label for Goods Issue as well.
From our understanding we need to use output type ET01 for delivery labels. However, we need inputs on how to implement this output type. And can we also print this output form through MIGO, as I understand message is determined only at the delivery level which comes after MIGO?
Please correct me if the output type ET01 is not meant for deliveries/GI label.
Thanks,
Anil Japa

Hi Anil,
Can you check this link MIGO
Regards,
Madhu.

Extended IDOC for transaction VL02N : Error 51

Dear,
I am Working on Extended IDOC for transaction VL02N (Outbound Delivery) and stuck in Inbound with Error 51: Specifications for units and quantities contain errors VBPOK-MEINS TO LIPS-MEINS MT.
Message no. VL282
How to resolve it?
At Outbound Programmed at EXIT_SAPLV56K_002 and at Receiver did WE57, BD51, WE42, WE20 and using listed below programs.
Function Module - IDOC_INPUT_DELVRY      - SAP Standard
Function Type - F (Function Module)
Basic Type - DELVRY03      - SAP Standard
IDOC (Enhancement) - ZDELV - Custom
Message Type - ZDELVRY - Custom
Process Code      - DELV      - SAP Standard
Thanks-
Varun

Hi varun,
in SAP you have a few keys that not only have a description depending on language but also the key itself varies from language to language. You can see that if you double-click on a unit field like i.e. MARA-MEINS: On domain level it will show a conversion exit. If you try the conversion exit function modules, you will find out that i.e. PC english pieces will be mapped to internal ST wich comes from the german Stück which is the translation of pieces.
Be aware that this special logic may apply for document types, partner types and a few more (?).
So, in IDoc processing this may cause harm. I did not analyze DELVRY03 structure and processing, I don't know any of your data, I haven't seen any line of your code, I don't know what you actually implemented.
So now it is your turn to check what you pass in the unit fields and how this is handled.
Regards
Clemens

Output type setting for MB1C transaction

Dear All,
I have to attach a custom SAPScript in the output type so that when the goods movement will be done through MB1C transaction, the SAPScript will be printed. Can you please help me out how to attach to the output type. I assume the printing through output type will be done through Other Goods Receipt --> Process Output.
Thanks and regards,
Atanu

Hi Atanu
Use the below IMG path.
IMG->Materials Management -> Inventory Management and Physicial Inventory -> Output Determination -> Assign Form and Programs.
Here we assign the form and print program to the output type.
Alternatively
1. You can use transaction NACE
2. Select Applicaiton ME for Inventory Management
3. Select the desired output type and then go for Processing Routines.
Here we assign the form and print program to the output type.
Kind Regards
Eswar

Output Type assigning for GR Print out

Hi,
As after cresting of GR through MB01 or MIGO we are taking GR print out with T. Code MB90 in this we are entering only GR No. and Yaer and the print out is coming re. to Output type WE03 even though we are keepint output type filed blank on the selection screen of MB90 .
I want to confirm the required setting for How this can be set as defalut output type WE03, WE02 etc..
regards,
zafar

Hi,
In MN21 you matain condtion record for specific access sequence.
Like plant/material/stor loc level or something different as per your requirement.
If you maintain 2 diff. condtion types like WE01 and WE03 for same combination then system will trigger output for both in MB90 transaction if you do not give condtion type in selection screeen.
Regards,
Shailesh

Output type configuration for the Goods Receipt without the PO.

Hi,
I have a scenario whereby I want two Smartform(s) to fire from the MIGO Transaction. It is for Goods Recepit / others . Movement type '501'. Now we have created a new output type ZWE1 and configured in the system in the Transaction SPRO as follows:
Materials Management Inventory Management and Physical Inventory Output Detaremination Output types
ZWE1 is configured along with the Program and the Routine name but no Smartforms has been specified since there are two smartforms to be triggered via this Z program and via MIGO based on the material type which would be decided by the Program internally.
We have also configured the Material Output Determination and the Procedures fin the Ciondition Procedures for the Control data ME0001 mentioning this output type without the requirement code 173.
We have also configured the Output type ZWE1 with the Program name and the Routine in the link Assign Forms and Program
but somehow the Program still does not get trigerred.
Can anyone please tell me what is the reason for this and how this Prpblem should be addressed.
Any help on this front would be appreciated.
Suitable eward points would be awarded if Your solution works.
Thanks,
Regards,
Deepak.

Answered.

Clarifications in picklist output type EK00 for transaction VL02N

Similar Messages

Maybe you are looking for