Clarify posting multiple sites...
I have searched the forum high and low without getting a clear and definite answer to this question.
Basically, I want to use iWeb to build and maintain several web sites. I have had success separating the sites using iWebSites. All I want to do is use my existing .mac server space to host several sites, which will be accessed by entering in a purchased domain name, which will forward you to that address. However, I do want one web site to be available for access directly (web.mac.com/username). The others can have a long and rediculous address, as they will be accessed by entering in another name anyhow.
Whenever I publish one site or the other, it overwrites the one I previously posted. I can't figure out how to get web.mac.com/username to count for one of the sites, and then the subsites to be at other addresses.
Is this possible using iWeb 1.1.2?
I would appreciate any help. Thanks a lot.
o.k. firstly, the only reason for using one of these multisite domain programs is if you need to keep the sites separate due to size and the added time it takes to publish when there are lots running at one time or if you are publishing them to separate webspaces. Otherwise iWeb is quite happy running more than 1 site all open at one time in the application. they are listed down the main panel on the left.
I have created a few sites from one Domain file (iWeb file) that when published all upload to .mac in 1-click, but are basically separate sites see links for examples on my .mac account.... (1 even has a separate password)
http://web.mac.com/dandid/iWeb/Site/
http://web.mac.com/dandid/iWeb/links%20page
http://web.mac.com/dandid/iWeb/654/
http://web.mac.com/dandid/iWeb/bunyan/
If all your sites require .mac features, or you want to have them ALL hosted on .mac (regardless of the original website address) then the best way is simply to keep all of them in the same iWeb Domain, i.e. just add new sites within the iWeb application, just as apple intended.
In addition to multiple sites in my main .mac area, I personally have a number of separate sites run using separate Domain files.
from these I publish to various places on the net by publishing to a local folder and using and ftp program to upload the HTML files. I only use these from separate Domain files so that I can make changes to some of the small sites without having to wait for iWeb to generate HTML for loads of sites at once.(my mac is slooooow)
You can open any number of separate sites either by manually moving the domain file within your library/application support/iWeb or by using one of the 'multisite' programs to manage them for you. Then you can use the 'publish to folder' command to prepare all the web ready html files etc to a local folder on your mac. You will then manually upload the files to your sites.
I'd read the help files for how apple actually intends you to manage more than 1 site if you still don't get it, because if you want them all on .mac anyway, it works pretty well just as they planned it.
or mail me if you want more help - [email protected]
hope this helps
Similar Messages
-
Managing multiple sites in different iWeb versions - PLEASE HELP!
apnewbie/cyclosaurus/roddy/old toad (and any others more knowledgeable than i):
i've run into a bit of a pickle. i am hoping someone can help straighten me out. i am about to jump out of a window. here's the rundown:
(for starters, i have a .mac account and am publishing to .mac.) i created a site in iWeb 1.1.2 on my work computer (mac book pro). worked great, really lovely. thought to myself, "hey, i'd like to create another site from home, but i don't have iWeb at home (powerbook G4) - i should buy iLife 08 so i can build these things from home and not have personal files on my work computer."
so: i had a site that i created within 1.1.2 with files written to iDisk. i purchased iWeb 08 and would like to have another site, but this one is being created in 2.0. i also am using a personal domain name this time around bought with google apps and hosted by godaddy. i published the new work in progress for a test run and...you guessed it...my original 1.1.2 site was rewritten by the 2.0 site. and the 2.0 site comes up as the standard google search page for domains that aren't up and running. whooopsie.
sorry for the lengthy intro, but that's the background. i guess my specific questions are:
1) i want to be able to maintain multiple sites from iWeb 2.0...can i open my 1.1.2 domain file in 2.0 and successfully bring that site into 2.0?
2) what is the most efficient and easiest way to get both of these sites running in 2.0? right now i have two domain files (created on two different computers).
3) for domain management, is it best to move from the iWeb folder in my home library to different folders (one for each site, with separate domain files, and my 2.0 domain file is NOT called domain, it's the name of the site) to another location? (and of course, i will back these up just in case.) and when i want to update a site, i just open that individual domain file, right? or will these sites publish over each other?
please help. i am at my wits end. i'm sure this is a relatviely simple issue, but i'm new to iWeb.
thanks, thanks, thanks for your help guys.
joojyjoojy,
Welcome to the forums!
First of all, your original 1.1.2 site may not, in fact, have been overwritten. It is quite possible that the site remains in it's position on the iDisk, Web/Sites/iWeb/YourSite, but because you published to the iDisk (.Mac) from 2.0, a different index.html file has been placed in the root level Web directory which is causing the 404 error. Navigate to the directory on the iDisk, using the Go menu in Finder, and look to see what is actually there. Follow this path:
Go/iDisk/My iDisk/Web/Sites/iWeb/YourSiteWillBeHereIfYourLuckIsGood
If your site is there, great; if it isn't, it's not really a problem because hopefully you still have the Domain.sites file on the MacBook Pro and you can republish it if necessary. If it is there, you can modify the index.html file on the iDisk using a text editor and get your url redirected back to where it should be.
Second, do not open your 1.1.2 Domain.sites file with 2.0 until you have a backup of this Domain file. External drives are best for this. Assuming the backup is in place, launch 2.0, choose the Domain.sites file, and click on "update". It will be updated to a Domain.sites2 file. If the site looks ok then continue on with editing/publishing.
Skipping to question (3), by all means, abandon the default location of the Domain.sites file in the Home folder's Library and get accustomed to keeping your Domain files in their own, respective folders. When you want to open one just double-click it.
You are going to encounter difficulties publishing multiple sites in 2.0.2, unless you keep all of the sites in a single Domain file. 2.0 is publishing to a different directory on the iDisk than 1.0; it publishes to /Web/Sites/, as opposed to /Web/Sites/iWeb/. Publishing a site from a separate Domain file erases previously published sites. I have been able to publish multiple sites, from multiple Domain.sites2 files, by mounting the iDisk and actually moving the Site folder back one level, into the root Web folder, and then publishing. When finished, I move it back again. If you have RSS feeds you will probably get a 'file in use' error. The alternative, (other than keeping all sites in a single Domain), is to publish the site to a folder and then manually drop the Site folder into the Web/Sites/ directory on the iDisk. Of course, some .Mac functions are lost when publishing this way.
Work through this info and post back.
-Mark -
How do you post multiple personal domains to .Mac sub accounts?
I was assured by .Mac tech support that .Mac will host a different personal domain on each of five accounts of a family pak. Now I discover that iWeb is a one-trick pony. I'm stunned that I can't create separate sites and upload them individually. I've never heard of an application that can only create one document!
And I can't even find the data for that ONE document; ~/Library/Application/Domain.sites2 is only 20kb no matter how many photos you've added to the site.
So I guess I have two questions: How do you post multiple domains to sub accounts?
And, where's my data?The tilde (~/Library/etc.) indicates home folder; that is where I was looking. I did a Spotlite search and discovered that in attempting to backup my data, I'd moved it; Spotlite found it and it was all intact.
Then I discovered I could duplicate Domain.sites2, change the names to Domain de.sites2, and Domain daru.sites2, open daru's site and delete de's, then open de's and delete daru's, and I had two separate sites that I presume I'll be able to upload separately. Once I get .Mac sub groups created...
Seems like a stupid bit of programming; must have hired some windows guys to code it...
Problem I'm having now is, .Mac won't let me set up a sub account in my wife's name because she already has a .Mac ID and a trial account because she joined a .Mac group. Awaiting a reply rom .Mac tech support.
So my question isn't quite answered yet, but it does look like I can post several sites without having to set up separate user accounts. Seems like this could be explained in the help file in plain English... -
How do you setup multiple sites to allow for code promotion?
I am somewhat frustrated with the single site flow of the Dreamweaver Site Manager in helping me manage a full development to production code cycle. Ideally I need to have multiple sites managed by Dreamweaver that are just different stages in the code lifecycle. Currently DW only supports local_file -> production. Instead I need (and this is sort of standard for software product systems) to have my local sandbox, a test site, a beta site and a production site.
In the normal dev cycle I would work in my sandbox and have DW synchronize with my test site ( allows scripts that need a full server to be tested in case my local machine is not running a full server ). I can do this today with DW. When I am ready I want be able to have DW synchronize with my beta site (might very well be on a different server via FTP) so that my users/customers can review, test and approve the changes. When everyone has signed off I then want DW to promote this code to the production site.
Now I can do this manually but DW seems to have 95% of the capability in place (mostly the synchronization logic). Is there a way to have it also manage/synchronize the beta and production sites?
Thank YouRichmaster wrote:
turingtest, I do have a couple questions.
Number one, does everyone in your family only sych their ipods from only 1 computer? If everyone only uses itunes from 1 computer I can see how that will work. But what if kids want to use itunes for windows? Will "Home Sharing" allow all their music purchased on the MAC, to be also displayed on their itunes for windows laptop? I noticed you have PCs and also an ipad. How do you manage your family's music on these devices?
Also, how did you first get everyone's music library into their own library? Drag & drop? Is the "grouping field" you mentioned under "view", then "view options"? What does this do?
Thanks.
Sorry I missed your post earlier. Normally I follow up on any replies. This one must have fallen off the page on a busy day.
As my kids have left home I have created for them a complete clone of the familiy library, then deleted the tracks from it they don't want. Over time their libraries will divirge, but if needs be they can still update their devices using the library at home. Handy when eldest's kit was stolen.
Grouping is just another property, useful because it isn't generally overwritten by other software but is stored in the tags, so preserved when you copy files from one place to another. You can make the column visible and edit for multiple tracks in Get Info. Some software calls the same field "mood" or "sub-genre". iTunes has a specialist purpose for it generally used with classical music, but it doesn't seem to work very well for that and I don't use it that way.
tt2 -
Noob needs help with hosting multiple sites
Hello I am new to this multi hosting. I have looked on the forum for answers but haven't found any. I am trying to figure out how to host multiple sites. I have my dns working for my default site "example1.com", but need to know if I need to add another dns record for my second site. "example2.com". Also when I point to the new fold that has the second site in it and I assign it port 82 for testing purposes I get an error message saying 403 access forbidden. I need to find out how get permission to view the site for the public. Its in a separate folder on an external hard drive right now for testing purposes. Can any body help me or point me in the right direction? Thanks so much!!!
-Kcam1999{quote}
While what you are telling him is technically functional, it is not correct
I beg to differ, Paul. You are the one that is not correct.
CNAMES have been deprecated as of some years ago
What? huh? really?
Please show me any official document that states this (and not someone who just started a rumor because he didn't understand them). Indeed, the DNS RFC makes no such claim.
{quote}
I stand very much corrected. CNAMEs are not officially deprecated. Interestingly, your post cites precisely what happens when CNAMES used carelessly. How many transactions are needed to resolve Apple's CNAME chain below? RFC1912 (http://www.faqs.org/rfcs/rfc1912.html) has some recommendations that suggests Apple's own network folks have, like me and perhaps even others here, some learning to do. Is that a 'best practice?'
{quote}> Then make sure you tell Apple since this site depends on the use of CNAMEs:
dig discussions.apple.com
discussions.apple.com. 492 IN CNAME discussions.apple.com.edgesuite.net.
discussions.apple.com.edgesuite.net. 4427 IN CNAME a1399.b.akamai.net.
a1399.b.akamai.net. 2 IN A 128.241.220.82
a1399.b.akamai.net. 2 IN A 128.241.220.72
In fact, it uses TWO CNAMES in a chain. Oh my.{quote}
From RFC1912 (which I'm sure many have now read here), section 2.4 is as follows:
{quote}... having chained records such as CNAMEs pointing to CNAMEs may
make administration issues easier, but is known to tickle bugs in
some resolvers that fail to check loops correctly. As a result some
hosts may not be able to resolve such names.{quote}
{quote}> It is not valid to say "don't use these because they could cause problems'. A records can be just as problematic, as can PTRs. Let's not even talk about MX.{quote}
How, exactly, does is an A record problematic? No chains, no additional lookups, no wasted cycles...
We differ here -- and if we are dealing with a newbie, we don't need to enter into unnecessary complexity UNTIL it is a requirement for their solutions.
{quote}> There are many valid reasons to use CNAMEs in DNS, not least of which is the ease of moving a service if it uses CNAMEs. For example, if you have 10 A records all pointing at the same server and you want to migrate to a different machine you have to locate and update all 10 records. If they used a CNAME to the physical server you could move them all at once using a single change. This is especially important in cross-domain links where you may not control all the origin zone files.
{quote}
You're somewhat reaching here, and it is well beyond the scope of the OP's post or needs (well, until they tell us more about their needs, I suppose). There is nothing difficult about 'finding' and updating the necessary records. The final example you gave is a good one and I'll say THAT is an appropriate use of a CNAME, 'though there are other workarounds for it.
Thanks for keeping me honest. -
Problem in posting multiple documents in FB70 through BDC...
Hi,
I am facing a problem while posting multiple documents from a flat file in FB70 thourgh BDC batch input by using session method. However, the session is getting terminated after posting the first document. Please clarify my problem.
Below is a sample of the data in my flat file -
Customer,Invoice Date,Posting Date,Amount,G/L Account,Amount in doc. Curr.
34,03.06.2009,03.06.2009,100,211000,100
34,03.06.2009,03.06.2009,200,211000,200
34,03.06.2009,03.06.2009,300,211000,300
And below is the sample code of my program.
REPORT ZANI2_BDC_FB70
NO STANDARD PAGE HEADING LINE-SIZE 255.
TYPES: BEGIN OF TY_STR_FB70,
ACCNT(20) TYPE C, "Customer
BLDAT(20) TYPE C, "Invoice Date
BUDAT(20) TYPE C, "Posting Date
WRBTR(20) TYPE C, "Basic Data - Amount
HKONT(20) TYPE C, "G/L Account
ITEM_WRBTR(20) TYPE C,
"Line Item Amount In Document Currency
END OF TY_STR_FB70,
BEGIN OF TY_STR_FILEDATA,
FIELDS TYPE STRING,
END OF TY_STR_FILEDATA.
* data definition
* Batchinputdata of single transaction
DATA: BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE,
* messages of call transaction
MESSTAB LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
DATA: IT_STR_FILEDATA TYPE STANDARD TABLE OF TY_STR_FILEDATA,
WA_STR_FILEDATA TYPE TY_STR_FILEDATA,
IT_STR_FB70 TYPE STANDARD TABLE OF TY_STR_FB70,
WA_STR_FB70 TYPE TY_STR_FB70,
G_STR_FILENAME TYPE STRING,
G_FLG_ERROR TYPE I,
G_INDEX TYPE I,
G_STR_INDEX TYPE STRING,
G_STR_FIELDNAME TYPE STRING.
SELECTION-SCREEN BEGIN OF BLOCK INPUT.
PARAMETERS: P_FILE TYPE IBIPPARMS-PATH,
P_SES TYPE APQI-GROUPID.
SELECTION-SCREEN END OF BLOCK INPUT.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = SYST-CPROG
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = 'P_FILE'
IMPORTING
FILE_NAME = P_FILE.
Continued in the next thread.....Continued from the previous thread.
PERFORM OPEN_GROUP.
G_INDEX = 1.
LOOP AT IT_STR_FB70 INTO WA_STR_FB70.
PERFORM BDC_DYNPRO USING 'SAPMF05A' '1200'.
PERFORM BDC_FIELD USING 'RF05A-BUSCS'
'R'.
"Customer
PERFORM BDC_FIELD USING 'INVFO-ACCNT'
WA_STR_FB70-ACCNT.
"Invoice Date
PERFORM BDC_FIELD USING 'INVFO-BLDAT'
WA_STR_FB70-BLDAT.
"Posting Date
PERFORM BDC_FIELD USING 'INVFO-BUDAT'
WA_STR_FB70-BUDAT.
"Basic data - Amount
PERFORM BDC_FIELD USING 'INVFO-WRBTR'
WA_STR_FB70-WRBTR.
PERFORM BDC_FIELD USING 'INVFO-WAERS'
'EUR'.
G_STR_INDEX = G_INDEX.
IF G_INDEX < 10.
CONCATENATE '0' G_STR_INDEX INTO G_STR_INDEX.
ENDIF.
CONDENSE G_STR_INDEX NO-GAPS.
CLEAR G_STR_FIELDNAME.
CONCATENATE 'ACGL_ITEM-WRBTR(' G_STR_INDEX ')' INTO
G_STR_FIELDNAME.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
G_STR_FIELDNAME.
"'ACGL_ITEM-WRBTR(01)'.
"G/L Acct
CONCATENATE 'ACGL_ITEM-HKONT(' G_STR_INDEX ')' INTO
G_STR_FIELDNAME.
PERFORM BDC_FIELD USING G_STR_FIELDNAME
WA_STR_FB70-HKONT.
"Amount .
CONCATENATE 'ACGL_ITEM-WRBTR(' G_STR_INDEX ')' INTO
G_STR_FIELDNAME.
PERFORM BDC_FIELD USING G_STR_FIELDNAME
WA_STR_FB70-ITEM_WRBTR.
"PERFORM BDC_DYNPRO USING 'SAPMF05A' '1200'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=BU'.
CLEAR WA_STR_FB70.
ENDLOOP.
IF G_FLG_ERROR IS INITIAL.
PERFORM BDC_TRANSACTION USING 'FB70'.
ENDIF.
IF G_FLG_ERROR IS INITIAL.
PERFORM CLOSE_GROUP.
MESSAGE 'Session created successfully.' TYPE 'I'.
ENDIF.
ENDIF.
Continued in the next thread.. -
Submitting site maps for multiple sites to Google
I sort of glommed on to the end of the thread "meta and google-ing...i give up," but I'll start a fresh post here with this:
I have three sites in iWeb, all of which have their own registered Go Daddy domain names and are forwarded to .mac without masking. I followed James Tseng's instructions and successfully submitted to Google and verified my "www.mac.com/user/iWeb" url.
I also successfully uploaded a site map for one of my sites (let's just call it Site 1), which is in my iWeb folder (not the Site 1 folder).
My question: I assume I can create separate site maps for Sites 2 and 3. Do they also go in the same iWeb folder as the first one? Is that possible if they're all named "sitemap.xml" or do they have to be given different names?
Also... if I want to submit these three sites to other engines like MSN and Yahoo, can I submit the forwarded domain names, or will these engines not follow the forwarding to my .mac url?
If that's the case, is it best to submit the single "www.mac.com/user/iWeb url" as I did with Google, or should I submit each site's .mac url separately?
Thanks in advance for your help!
Mitch<As posted in the the other thread...>
Hi Mitch....
I hope you've been finding all this helpful so far! It's always fun to see just how much feedback you can get from Google. Sort of gives you a feeling that "you've arrived". haha.
Regarding your question about sitemaps and multiple sites.... My strategy is this... I like to give Google sort of the broadest catch that I can. That's why I really suggest to people that they register the most general URL... http://web.mac.com/username/iWeb/ . You see how that really leaves the door open for the possibility of multiple sites, without having to register multiple sites. Google really doesn't care that you call them separate sites...to Google they appear as part of the same site...with the same base verified URL.
So with that registered URL, there really is only one place where the verification file and sitemap.xml file can go. And that place is in the iDisk/Web/Sites/iWeb/ folder. And there is really only a need for a single verification file and a single sitemap.xml file, no matter how many sites you have. The point here isn't telling Google that you have more sites...it's just about telling Google that you have more LINKS in the site that it already knows about.
So how do you do this? Just spider your new site or gather the links in your own way and then copy and paste the links (just the links section...not the first two lines or the last line of the code) into the sitemap.xml file that you have already submitted before. Then resubmit it to Google.
Does this make sense? Let me know what you think. -
Search option or Query to search multiple Site collections?
Is there a Search or Portal site Hierarchy/ Structure option in SharePoint 2013 that would enable searching of specific and multiple Site collections (not Search all)?
We opened a ticket with Microsoft o365 and they said this is not possible without custom development and that search queries can't span multiple Site collections.
Is this true?You can setup a custom Result Source that limits results to the paths (URLs) provided, then use this Result Source in a custom search page, CSWP, etc. Check this post for more info:
http://sharepointbrandon.com/2013/07/setup-multiple-search-pages-result-sources-search-scopes-for-a-site-search-in-sharepoint-2013/
You can use the path restrictor to specify the URLs to limit the search to, IE: "path:http://yourdomain/site".
Hope that helps.
Brandon Atkinson
Blog: http://sharepointbrandon.com -
I have created 3 different sites in iWeb. Two of them I publish to a folder and then via FTP I place them in the appropriate folders at my server. The third is one that I want to publish to my mobile me website. All pretty easy except it won't let me post just one site. Everytime I ask to publish to the ME account I get all three sites. How do I post just one of the sites I've created...
patti-jane:
Welcome to the Apple Discussions. I use iWebSites to manage multiple sites.. It lets me create multiple sites and multiple domain files.
If you have multiple sites in one domain file here's the workflow I used to split them into individual site files with iWebSites. Be sure to make a backup copy of your original Domain.sites files before starting the splitting process.
This lets me edit several sites and only republish the one I want.
OT -
Using SPSiteDataQuery for multiple Site Collections
Hi All,
I would like to query five contact lists on multiple site collections. I can query the lists using SPSiteDataQuery if they are within the same site collection, but I can not query the lists over multiple site collections.
Is there a method like SPSiteDataQuery that I can use to query lists over multiple Site Collections?
Many Thanks,
ColinHi,
As you have mentioned that: SPSiteDataQuery which can query multiple webs within the same site collection, but not across multiple site collections. You can't accomplish that easily.
The solution evolves from first using the SPSiteDataQuery class to run a query upon each site collection and then aggregating the results.
For detailed information, refer to the following article:
https://oidatsmyleg.wordpress.com/2009/08/13/cross-site-collection-query-almost/
Besides, here is a similar requirement post, you can take a look at:
http://sharepoint.stackexchange.com/questions/114329/accessing-list-data-in-multiple-site-collections
Best Regards,
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
Hello,
My business has recently started using Sharepoint, and we need to know if its possible to set up tasks in multiple sites as tasks are often integrated across sites. If there is a way, please share!
Thanks,
EmilyHi
Emily,
According to your post, my understanding is that you wanted to display tasks across sites.
Did the tasks in the same site collections ?
If so , you can use the User task web part.
User task web part is used to show the tasks for current user in the task list of the current web site.
https://milesli-admin.sharepoint.com/_layouts/15/online/SiteCollections.aspx
However, in SharePoint 2013, there is My Tasks web part in MySite, which will show all the tasks for the user, please have a test whether this meet the requirement.
Another workaround can be considered is Content Query Web Part, it can be used to show tasks in a site collection, more about content query web part:
http://msdn.microsoft.com/en-us/library/ff650512.aspx
Or Content Search Web Part, it can be used to show tasks across site collection.
For more information about the content search and content query web part, you can refer to the following article.
http://info.axceler.com/Blog/bid/116286/Content-Query-Web-Part-vs-Content-Search-Web-Part
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support -
Customer is getting created multiple tims when it has multiple sites
Hi,
I developed customer conversion.
when I load data through conversion in R12 Customer is getting created multiple tims when it has multiple sites.
what are the things I have to take care to prevent this.
Please suggest me If any one has Idea.
Thanks & Regards,
Narendra.Hi Gabriel,
Thanks for taking time to reply to my post.
When one of my collegue giving the print, there is only one spool which is getting created, but when I run the program there are multiple spools are getting created.
-Pradeep -
Creating multiple "sites", similar to many iPhoto Libraries
I noticed that iWeb lets you create multiple sites, but the page names have to be unique across all sites. I figured there had to be a way around this. I do similar things with iPhoto, I have mutliple libraries and select which library I'd like to use when I start iPhoto. This way I can keep my photos separate and more manageable to me.
I saw someone posted in this forum about where does iWeb store your sites. The answer is Your-Home-Folder/Library/Application Support/iWeb/ in a file (really a package) called "Domain". If I rename that file to say "My first set of sites" and then start iWeb, it starts off with no sites defined.
Of course this hack requires me to manage the names of the files. The file named "Domain" is the one that is used by iWeb. Even clicking on a differently named file does not work. iWeb silently appears to ignore it. I tried pressing the option key while starting iWeb (like I do when starting iPhoto) but alas no luck, iWeb ignores it.
Not the most elegant solution, but it works for those who are willing to manage the file name stuff manually.
17" PB Mac OS X (10.4.4)
17" PB Mac OS X (10.4.4)Yes. I tried various other things, like renaming and then double clicking on the now differently named file (kept the existing extension) yet iWeb would not use the file I had double clicked on.
Friday evening both iWeb and Rapidweaver were new to me. For now I've settled on using Rapidweaver, but I certainly hope that iWeb gets updated, and quickly. iWeb clearly has potential but Apple needs to make some changes before the program becomes very useful, at least in my opinion. -
Azure multiple site-to-site VPNs (dynamic gateway) with Cisco ASA devices
Hello
I've been experimenting with moving certain on-premise servers to Azure however they would need a site-to-site VPN link to our many branch sites e.g. monitoring of nodes.
The documentation says I need to configure a dynamic gateway to have multiple site-to-site VPNs. This is not a problem for our typical Cisco ISR's. However three of our key sites use Cisco ASA devices which are listed as 'Not Compatible' with dynamic routing.
So I am stuck...
What options are available to me? Is there any sort of tweak-configuration to make a Cisco ASA work with Azure and dynamic routing?
I was hoping Azure's VPN solution would be very flexible.
ThanksHello RTF_Admin,
1. Which is the Series of CISCO ASA device you are using?
Thank you for your interest in Windows Azure. The Dynamic routing is not supported for the Cisco ASA family of devices.
Unfortunately, a dynamic routing VPN gateway is required for Multi-Site VPN, VNet to VNet, and Point-to-Site.
However, you should be able to setup a site-to-site VPN with Cisco ASA 5505 series security appliance as demonstrated in this blog:
Step-By-Step: Create a Site-to-Site VPN between your network and Azure
http://blogs.technet.com/b/canitpro/archive/2013/10/09/step-by-step-create-a-site-to-site-vpn-between-your-network-and-azure.aspx
You can refer to this article for Cisco ASA templates for Static routing:
http://msdn.microsoft.com/en-us/library/azure/dn133793.aspx
If your requirement is only for Multi-Site VPN then there is no option but to upgrade the device as Multisite VPN requires dyanmic routing and unfortunately there is no tweak or workaround due to hardware compatibility issue.
I hope that this information is helpful
Thanks,
Syed Irfan Hussain -
Is there a way to pay more than one site for a supplier in the same payment?
Hello All,
Any solution for this situation ? We are on R12 and we would like to pay single payment for multiple sites for same supplier. Anyone has any idea how do we go about this ?
Thanks in Advance
Dinesh
Edited by: Dinesh Chauhan on 11-May-2010 01:15
Maybe you are looking for
-
How do I simply replace a clip in this situation...
I have a video clip in my timeline that has been trimed at head and tail. It has a couple of pieces of audio attached to it. I want to replace it with a newer version of the clip witout disrupting my timeline. None of the Replace options put it in th
-
How do I create a single iPhoto Library on a server that multiple people can use at the same time?
Currently our architecture office runs iPhoto buddy to manage our iPhoto libraries but we want to be able to have multiple users viewing the same iPhoto Library? Currently it only allows one user to access this library. How do we do this?
-
'the preferences file is corrupt and has been reset to the default settings' - cs4 Mac
greetings! every time i start illustrator i encounter a new error. "the preferences file is corrupt and has been reset to the default settings." "the corrupt file will be backed up as Adobe illustrator Prefs.err" this problem manifested after i added
-
ISE 1.2 AuthZ fail because of 'extra' AD lookup
Hi, I have a PoC going with wired 802.1X and MAB, laptops with certificate and AD look up works well. With this I also have printers not in AD that will use both certificates and MAB for authentication. When I try to do EAP-TLS or MAB on printers it
-
I use Adobe Product Store from Adobe Gaming SDK and Milkman Game IAP ver 1.0.9 and both got reject from Apple say that it doesn't ask user information to buy IAP. Please help.