Clarify these

Hi bw gurus,
can u plz explain me these.
1. how do you convert tech spec to functional spec?
2. any toughest scenario in implementation proj?( plz for interview purpose}
points fully assured***
Thanq,
Madhavi

Hi,
1. how do you convert tech spec to functional spec?
First of all we cant convert using either one document to another document. Instead of that we have to create both documents in different time. You can understand by reading the following definitions:
Technical Specification:
Here we will mention all the BW objects (info objects, data sources, info sources and info providers). Then we are going to say the data flow and behaviour of the data load (either delta or full) also we can tell the duration of the cube activation or creation. Pure BW technical things are available in this document. This is not for End users document.
Functional Specification:
Here we will describe the business requirements. That means here we are going to say which are all business we are implementing like SD, MM and FI etc., then we are going to tell the KPI and deliverable reports detail to the users. This document is going to mingle with both Function Consultants and Business Users. This document is applicable for end users also.
2. any toughest scenario in implementation proj?
That is depending on the implementing procedure. For example you are going to implement the project with full of customizing objects even data source also then that will be tough compare with activate the business content.
If your implementation is based on only activation of the business content, then there will not be taking more risks. Only thing we have to take care of the enhancements. For this you have lot of best practices are there.
Regards,
Vivek V

Similar Messages

  • Clarify these words:posting period varients & open & close posting period

    Hi Sap Gurus,
    Someone kindly make me clarify following words.Thank you.
    1.Posting period varient.
    2.Open & close posting periods
    3.Assign posting period varients to company code-What does it do after assignment?
    Best Regards,
    priya desai
    Financial Analysist

    Hi,
    It is very easy and understandble.
    1.Posting period varient.
    If you want to post any documents you need to enter some date right? That date would belongs to some posting period right?.
    for Example your Fin.period is JAN to DEC. Means 01 is for Jan, 12 is for DEC, 05 for May.
    So according to your requirement you have to create the variant and define what do you want.
    2.Open & close posting periods
    When you in operation and if you are posting a document in the month of Feb. the period Jan has been closed it will avoid the mistakes while posting to the different periods.
    3.Assign posting period varients to company code-What does it do after assignment?
    Once you have created your company code and your posting variant. You are assign to make the link to both the level.
    Warm Regards,
    Sivakumar Sathiyamoorty

  • Clarify These doubts Plz

    1.Why we are using XI in the file to IDOC scenario?without XI we'll do this data transfer from third party system to SAP r/3 system by using EDI.so wht is the neccesity to use of XI?
    2.How we can recognise the third party system in XI?don't say abt technical and business system.
    3.In which Cases we are using Host and IP address?
    4.What is the criteria for crearting Port in IDX1?
    5.Is it necessary to maintain IDX2?
    6.Why we are Using BPM?when we are using BPM?

    Go thrugh the below links u will get the solution of all ur querry
    XI –Starter
    http://help.sap.com/saphelp_nw04/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm
    SAP XI - Where to Find Information
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/sap%20xi%20-%20where%20to%20find%20information.pdf
    All the information you need in XI :
    http://help.sap.com/saphelp_nw04/helpdata/en/0f/80243b4a66ae0ce10000000a11402f/frameset.htm
    To understand the architecture of XI, Please go through this link,
    http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
    You can also go through the url for Elearning :
    https://www.sdn.sap.com/sdn/elearning.sdn // https://www.sdn.sap.com/irj/sdn/sdnpilot/elearning
    Following is the link for 'how to guides', A step by step guide to create scenarios:
    https://websmp201.sap-ag.de/nw-howtoguides
    XI is all about configuration of Adapters, to learn more please go through this link:
    http://help.sap.com/saphelp_nw04/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm
    One of the most powerful feature of XI, Business Process Management:
    http://help.sap.com/saphelp_nw04/helpdata/en/3c/831620a4f1044dba38b370f77835cc/frameset.htm
    How the messages are delivered through XI:
    http://help.sap.com/saphelp_nw04/helpdata/en/17/50d440e14f8431e10000000a1550b0/frameset.htm
    Once you go through these links and are a bit aware what all XI objects do, you can try a simple "File to File Scenario" which would help you to understand XI objects in a much better manner.
    For help on this scenario go through this blog it is in two parts thus I am providing both links below:
    /people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
    /people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
    Here is a blog of new to xi.
    /people/sap.user72/blog/2005/12/22/new-to-xi
    SAP XI Learning Guide
    http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci1008087,00.html
    Exchange Infrastructure How-to Guides for SAP NetWeaver 2004 [original link is broken] (how to guides)
    http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm (very nice XI help)
    Here is some scenarios from SDN:
    /people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File
    /people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy - ABAP Proxy to File
    /people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30 - File to JDBC
    /people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy - File to ABAP Proxy
    /people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1 - File to File Part 1
    /people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2 - File to File Part 2
    /people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping - Any flat file to any Idoc
    /people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit - File to RFC
    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] [original link is broken] - File to il
    /people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i - Dynamic File Name Part 1
    /people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii - Dynamic File Name Part 2
    /people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address - Dynamic Mail Address
    /people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi - Message Flow in XI
    /people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm - Walk through BPM
    /people/siva.maranani/blog/2005/05/22/schedule-your-bpm - Schedule BPM
    /people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - Use of Synch - Asynch bridge in ccBPM
    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in ccBPM
    /people/michal.krawczyk2/blog/2005/08/22/xi-maintain-rfc-destinations-centrally - Maintain RFC destination centrally
    /people/sravya.talanki2/blog/2005/08/18/triggering-e-mails-to-shared-folders-of-sap-is-u - Triggering Email from folder
    /people/sravya.talanki2/blog/2005/08/17/outbound-idocs--work-around-using-party - Handling different partners for IDoc
    /people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi - Modeling Integration Scenario in XI
    /people/michal.krawczyk2/blog/2005/08/25/xi-sending-a-message-without-the-use-of-an-adapter-not-possible - Testing of integration process
    /people/michal.krawczyk2/blog/2005/05/25/xi-how-to-add-authorizations-to-repository-objects - Authorization in XI
    http://help.sap.com/saphelp_nw04/helpdata/en/58/d22940cbf2195de10000000a1550b0/content.htm - Authorization in XI
    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - Alert Configuration
    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - Trouble shoot alert config
    /people/sameer.shadab/blog/2005/09/21/executing-unix-shell-script-using-operating-system-command-in-xi - Call UNIX Shell Script
    /people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi - Transport in XI
    /people/r.eijpe/blog/2005/11/04/using-abap-xslt-extensions-for-xi-mapping - Using ABAP XSLT Extensions for XI Mapping
    /people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure - Mail Adaptor options
    /people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm - Collection of IDoc to Single File
    /people/sap.user72/blog/2005/11/17/xi-controlling-access-to-sensitive-interfaces - Controlling access to Sensitive Interfaces
    /people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14 - The same filename from a sender to a receiver file adapter - SP14
    /people/prasad.illapani/blog/2005/11/14/payload-based-message-search-in-xi30-using-trex-engine - Payload Based Message Search in XI30 using Trex Engine
    /people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i - XI : Configuring CCMS Monitoring for XI- Part I
    /people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter - XI: HTML e-mails from the receiver mail adapter
    /people/sap.user72/blog/2005/11/22/xi-faqs-provided-by-sap-updated - XI : FAQ's Provided by
    SAP
    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/6051-Performance [original link is broken] [original link is broken] [original link is broken] [original link is broken] Tuning for PI
    eful.
    Thanks
    <b>pls reward if useful</b>

  • Please clarify these doubts

    1.From 10g onwards, oracle introduced new data types BINARY_FLOAT and BINARY_DOUBLE.What is the significance of word BINARY in these datatypes?
    Is the word BINARY because of the way the calculations are done when these datatypes are used?
    2.*Oracle uses blank characters to fill format elements to a constant width equal to the largest element for the relevant format model in the current*
    session language.What is the reason for returning constant width?
    3.In the syntax for simple comparison conditions, the syntax when we have more than one expression is
    *(expr1,expr2,...) {=| != | ^= | <>} (subquery)*.My question here is why other relational operators like <,>,<= and >= are not allowed?Is there any specific reason for this?
    Regards,
    Sreekanth Munagala

    Hi, Sreekanth,
    Sreekanth Munagala wrote:
    ... My question was how Oracle treats a string literal in SQL functions, whether it treats it as a CHAR or VARCHAR2 datatype?"String literal" means text enclosed in single-quotes. For example, the 2nd argument in this call to TO_CHAR is a string literal:
    TO_CHAR ( hiredate     -- This argument is a DATE column
         , 'DD-Mon-YYYY'     -- This argument is a string literal
         )What does it matter if the string literal is treated as a CHAR or a VARCHAR2? Give a specific example.
    You can see the data types of arguments by querying the data dictionary view all_arguments. There are several versions of TO_CHAR, overloaded in the package sys.standard. You'll see that many of them have the data type VARCHAR2, but none of them have the data type CHAR. If you do pass a CHAR argumnent where the function is expecting a VARCHAR2, it will implicitly convert it.
    Since CHAR is a fixed length datatype and the output of the function TO_CHAR is always a fixed length by default (i.e. without using FM), i think oracle is treating the string literal as CHAR datatype.Are you talking about the value returned by the function, or some literal? Literals only apply to written code; functions never return literals.
    The output of the function TO_CHAR is not always a fixed length without 'FM'. For example, this one call to TO_CHAR in one query, using one set of NLS settings:
    SELECT  TO_CHAR (comm, 'TM')  AS f_comm
    FROM    scott.emp;produces strings that are sometimes 1 character long, sometimes 3, and sometimes 4, as well as NULLs.
    It may be true that a given call to TO_CHAR in a given statement, where the first argument is a DATE and the 2nd argument is a constant and does not include 'FM', will always return a string of the same length. That still doesn't matter. The return type of the function has to be specified when the function is compiled; the system can't wait until you call the function, then examine its arguments to see if they meet all the special conditions set above, and only then determine which data type to return. It has to know, before the function is ever used, which data type to return.
    Look up TO_CHAR in the SQL Language manual to see what data type it returns. It's VARCHAR2.

  • Clarify these questions tooo ..

    Hi gurus,
    Well, there are basically 13 types of triggers ( the combinations of before insert, before update, before, after insert, after update, after delete, and for each row option and instead of triggers) .. Apart from these , are there any triggers like session level triggers etc., ?? if yes, can anyone pass on the types of triggers link please
    Regards

    Narendra,
    I'm only using your reply as an example to make a point about links to documentation.
    When you access the documentation from this URL:
    http://www.oracle.com/technology/documentation/index.html
    You are redirected to the Web server most suited to you. Mainly, this means the one that is closest to your geographical location.
    Also, the URL above has links all of the Oracle documentation, so when someone asks a question and does not indicate any version details, they can locate the documentation relevant to their version from the aforementioned URL.
    Good Luck,
    Avi.

  • Clarify these questions .. please

    Hi gurus,
    Today, I have attended an interview .. Unfortunately couldnt get thru .. But there were certain questions, which really blew my head off .. Please help me in getting the solutions ..
    1)There are two tables (named x and y) in the database.. Both the structures of x and y are the same (columns and column names are same, and in y, there are two other additional columns) In x table there are two columns, the data in this table is somewhere around one million records .. Now I want to insert the data into y from x .. if I use insert statement, it will take lot of time .. What's the better alternative to insert into table y (keeping in mind the performance issue)
    2) There are two procedures (named a and b) in the database .. From A (procedure), I am calling B .. Somewhere and somehow, an exception has been raised in procedure B, which I want to return (the exception name) to procedure A and also the control to procedure A .. How can I achieve this ?
    3)What are the differences between RBO and CBO
    4)I have to create two packages (named A and B), in which, in Package A, I have to create A1 procedure, and in package B, I have to create B1 procedure.. Now, I have to call B1 procedure from A1 .. and A1 procedure from B1 .. Now the twist is, if i am creating package A with A1 procedure, package B and B1 procedure hasnt been created yet .. or if i am creating package B with B1 procedure, package A and A1 procedure hasnt been created yet .. How can I call a procedure which is there in a package which is not yet created ??
    Please suggest
    Regards

    Hi,
    Thanks for your reply .. Well, tell me one thing ..
    . You are saying to avoid cursors or nested loops ,
    instead of using simpel insert statement .. isnt it
    But tell me one thing .. if i am using simple insert
    statement, that too for millions of records .. dont
    it take lot of time ?? wont it hamper the performance
    ?? Please suggest
    Regards
    SQL> create table t (x number);
    Table created.
    Elapsed: 00:00:00.57
    SQL> select count(*) from all_objects;
      COUNT(*)
         41046
    Elapsed: 00:00:14.87
    SQL> insert into t select x.object_id from all_objects x, (select rownum from dual connect by rownum <= 25);
    1026150 rows created.
    Elapsed: 00:00:17.76
    SQL>So that's a single insert statement doing over 1 million records in just 17 seconds (on my desktop database, not our server) and now....
    SQL> rollback;
    Rollback complete.
    Elapsed: 00:00:06.75
    SQL> select count(*) from t;
      COUNT(*)
             0
    Elapsed: 00:00:00.14
    SQL> begin
      2    for i in 1..1000000
      3    loop
      4      insert into t values (i);
      5    end loop;
      6* end;
    SQL> /
    PL/SQL procedure successfully completed.
    Elapsed: 00:01:02.71
    SQL>1 million inserts via PL/SQL in a loop taking over 1 minute to complete.
    The problem this way is that Oracle is constantly having to switch between the PL/SQL engine and the SQL engine for each Insert statement.
    It's fine to embed SQL within PL/SQL as long as you don't keep making repeated calls where you can do things in a single SQL statement i.e.
    SQL> begin
      2  insert into t select x.object_id from all_objects x, (select rownum from dual connect by rownum <= 25);
      3  end;
      4  /Is fine because it just calls out to the SQL engine the once to achieve the task rather than multiple switching between the two engines.
    ;)

  • RoboHelp Setup Problem

    Okay, i just dished out $1000 for this thing and can't even
    create an HTML project. The sample projects won't even open and
    i've confirmed they exist.
    Details:
    installed RoboHelp 6. When i run RoboHelp HTML, and try to
    open one of the sample projects, i get the following dialog:
    Open project was cancelled or the application was unable to
    load database for :
    "C:\program files\adobe\robohelp
    6.0\RoboHTML\Samples\ApplicationHelp\applicationhelp.cpd"
    I navigate to the path above and confirm the path is correct
    and the applicationhelp.cpd exists. So i press OK at the dialog,
    and just try to create my own project. It only gets worse.
    I perform the following steps:
    1-In RoboHelp HTML, go to File/New/Project.
    2- the "New Project" dialog opens
    3-select WebHelp and click OK.
    4-the "New Project Wizard" dialog opens
    5-I enter a title and select a path "C"\RoboHelp6\Project1"
    6-I click "Finish". The New Project Wizard closes and returns
    me back to the "New Project" dialog.
    7-(hmmm...must have done something wrong i think)
    8-In the New Project dialog, i click OK.
    9-I'm now taken back to the "New Project Wizard" dialog.
    10-i repeat the same steps - entering Project1 as and
    C:\RoboHelp6\Project1 as the path
    11-i click Finish and get error:
    Unable to creat enw project. Specified folder is not empty.
    12-My only option to leave the "New Project" dialog box is to
    click Cancel
    13-i click cancel
    14-i look in the folder and have the following files:
    !SkinSubFolder!
    HtmlHelp.css
    project1.cpd
    project1.hpr
    project1.syn
    default.css
    MS_Help.css
    project1.glo
    project1.ppf
    w95help.css
    Where's the project file? When i go to open a new project and
    select the directory no .xpj or mgj files are listed!!! Anybody
    know what i'm doing wrong?
    BTW: i uninstalled and re-installed the product 4 times now.
    Still can create an HTML project.
    PLEASE HELP!!!!

    Just to clarify, these forums are mostly supported by other
    RoboHelp users rather than Adobe employees. The Community Expert is
    simply a recognition by Adobe of the work I do in these forums, I
    am not employed by them. I mention this as you ask Adobe not to
    require you to wipe your hard disk. Actually you will need to wipe
    the entire network to fix this one. OK, I'm lying.
    It does sound like X5 has left something behind and that does
    sometimes happen. First uninstall RH6. I am not sure what effect
    installing it on a virtual machine will have had so fingers crossed
    there. (Uninstall both instances though). Then go to my site and
    see the instructions there for Installing. They cover some extra
    steps that are sometimes needed. Try those which involve some
    registry edits so usual warnings about backing up etc.
    After you have done that, reinstall RH6 and then everything
    should be OK.
    Let us know how that goes.

  • Creating business services in integration directory

    Hi
      When business services are created in integration directory - these business services are not tied back to entries in the SLD - i.e we can create entries for business services directly in integration directory without having to import them from SLD.
    Now, when we migrate - from Dev environment to other landscapes - my understanding is that these business service entries are going to be migrated with the same names -and no transport target entries / validations is made during the target system import time - which happens in case of business systems having entries in SLD....
    Could anybody out there - clarify these thoughts about business service entries
    Thanks in advance - for your time .

    Hi Karthik,
         Check out these help file links, hope this will help you:
    <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/fe/131eb4ef2fb344abf471c9eac0063a/frameset.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/fe/131eb4ef2fb344abf471c9eac0063a/frameset.htm</a>
    <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/c7/301640033ae569e10000000a155106/frameset.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/c7/301640033ae569e10000000a155106/frameset.htm</a>
    <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/7d/6b82cd0d1aef48ab5953524c9cc5b2/frameset.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/7d/6b82cd0d1aef48ab5953524c9cc5b2/frameset.htm</a>
    http://help.sap.com/saphelp_nw2004s/helpdata/en/e6/908d3f7057eb0ce10000000a114084/frameset.htm]
    Regards,
    Subhasha ranjan

  • Service Desk configuration

    Dear All,
    I am in the middle of the configuration of SAP Service desk,
    i am able to create message and message are going from Quality Server to Solution manager server fine,
    here i can view  the message,
    i am unable to properly process the message, like how do i reply to the person who has created message in Quality server.
    i am not seeing any change when i set the message status to Customer Action,
    from where customer will view his or her message,
    please clarify these points.
    Regards,
    Irfan.

    Hi
    Have already seen this how to guide for service desk for EHP1
    https://websmp108.sap-ag.de/~sapdownload/011000358700000776062009E/Howto_ServiceDesk.pdf
    Secondly you can check for security for access related stuff
    https://websmp202.sap-ag.de/~form/sapnet?_SHORTKEY=00200797470000075728&_OBJECT=011000358700007187872005E
    Hope it helps.
    Regards
    Prakhar

  • Convert smartform output in to PDF using CONVERT_OTF function  how to do it

    Hi Anil , and  Hi All
             I am trying to display smartforms output in java webdynpro
             for that i have got the following code in sdn.
               can anybody please clarify these doubts in the  below code
               1) What are the mandatory input and output parameters
                   I have to pass here in this code to my application
               2) please check my previous post also in this regards please
       . Please reply at the very earliest. Check the below code
    Convert smartform output in to PDF using CONVERT_OTF function module and you can write pdf using parameter 'binfile' of this function in WebDynpro using the following code:
    It is copied from my prg. I hope you understand it.
    public void onActionGetQuote(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
    //@@begin onActionGetQuote(ServerEvent)
    wdThis.wdGetOppt_QwriterCustController().executeZquote_Writer_Input();
    String fileName = wdContext.currentZquote_Writer_InputElement().getOrder().toString().trim() + System.currentTimeMillis() + ".pdf";
    String pdfOutput = new String(wdContext.currentOutputElement().getBinfile());
    if (pdfOutput != null)
    try
    String pdfResoucePath = WDURLGenerator.getResourcePath(wdComponentAPI.getDeployableObjectPart(), fileName);
    FileOutputStream fileOutputStream = new FileOutputStream(new File(pdfResoucePath));
    PrintStream ps = new PrintStream(fileOutputStream);
    ps.print(pdfOutput);
    ps.close();
    //Display the PDF to the browser
    String fileURL = WDURLGenerator.getAbsoluteWebResourceURL(wdComponentAPI.getDeployableObjectPart(), fileName);
    IWDWindow window = wdComponentAPI.getWindowManager().createExternalWindow(fileURL, "Pdf Browser", false);
    window.removeWindowFeature(WDWindowFeature.ADDRESS_BAR);
    window.removeWindowFeature(WDWindowFeature.MENU_BAR);
    window.removeWindowFeature(WDWindowFeature.STATUS_BAR);
    window.removeWindowFeature(WDWindowFeature.TOOL_BAR);
    window.open();
    // To collect all the file created in the server by user
    quoteFiles.add(quoteFiles.size(), pdfResoucePath);
    } catch (Exception e)
    throw new WDRuntimeException(e);
    //@@end

    Hi
        ABAPers prepared a BAPI function module which calls Smart form , how can i execute it from java Webdynpro, so that I can display the smart form in Webdynpro. Pleas reply at the very earliest.  Every answer will be rewarded.
    regards
    jalandhar

  • Hi, Im having trouble with my Iphones sounds, it wont let me listen to music, watch videos, notify me if i get a text, basically everything that makes a sound is no longer working. The volume level you get when you play music isnt there, HELP?!

    Hi, basically i have no sound at all on my Iphone, it doent notify me when i get a text, when someone rings, when i play music or watch videos, the volume slider that is usually present while watching videos or listening to music is no longer there at all, ive turned my phone on and off a couple of times now ive put headphones in and out to see if i had a sticky jack but still no luck Someone help??

    And to clarify, these are all iTunes movie and music downloads, so there should not be a compatability issue. And no, the iPod did not come damaged from Apple, it was a hand-me-down from a friend who busted the internal speaker. But it's never done anything like this before. It just had crappy sound. And yes, the timing of the movies and music having issues is the same as the speaker dying. And no, this has NOTHING To do with music videos. I don't have any on any of our devices.

  • Can't save multiple folders to external drive. Get: "The operation can't be completed because you don't have permission to access some of the items." when dragging large folders to mac os extended journalled external drive from OS 10.6.8

    Hi
    I am feeling  VERY desperate!
    After losing an external drive [dont ask....]  -   I got  another one :  2TB WD formatted properly [ OS extended journalled for mac ] ready for action to move  my thousands of files and images and ppts in hundreds of folders across from the laptop to this drive because I travel a bit with the laptop and this is too risky not to back up at home.
    But this message came up after starting on moving folders across [** and not straight away, sometimes after moving  a folder  when  4 of 6 gb of files across  then the message comes up  = very frustrating]:
    "The operation can’t be completed because you don't have permission to access some of the items."
    I am  dragging mixed sometimes large complex folders to this  os extended journalled external drive from my mac book pro OS 10.6.8  - it would take decades to move items one by one or even folder by folder and really confusing. 
    I have  dragged-copied  various small folders and files across successfully, but it is only working 50:50 and I can't leave machine with the idea of things copying eg: overnight - it just won't work....
    I have been browsing google and find some people describing in CODE how they overcome this 'message'   .... but  I  [and I guess some other viewers of this in future & also in desperation]  would need  instructions for beginners....  to try this type of thing.  I don't know any code.
    How can this be happening - I feel ANGRY at APPLE !!!!  for not posting easy fix instructions yet re; this, or better still  updating software so it doesn't happen [ that I can find at least  !!! ] .   There seem to be hundreds of people stuck with this stupid message and inability to back up their projects etc.
    Can anyone help ?
    Many thanks
    Julie
    15 August 2011

    hi Samberl
    thanks a lot for the fast reply.
    I was dragging folders from main folders on the laptop-desktop  onto the external drive icon - to copy them across....
    Your suggestion sounds very promising -  I didn't know about 'cloning'.
    Yes the idea is to backup the laptop -    I thought I would just move it all now, new - and then keep saving/dragging physically   across to the new drive myself each day or two...
    Would this be the sizeof the internal hard drive = c.500 gb  ?   =   under the HD icon on desktop is written  : 
    " 499.76gb , 311.5 gb free  " 
    I can erase and start agin on the new external drive - so this plan is to make two partititions, rather than the one at present, and make one of them 500 gb ?
    I have found CCC [carbon copy cloner] googling - looks good.
    When CCC site says it backs up  the hard drive - would this  mean all my files  [over 100 gb] that are mostly  in folders on the desktop, plus the others in itunes, iphotos etc found in the HD icon,  would all copy across successfully [wherever they are in the computer ]  ?
    thanks again, hope you can clarify these things and then I will go for it. 
    It would be great and amazing if this 'lack of permission' message doesn't show up in the process of doing this ccc transfer - hopeful!
    Julie

  • InDesign CS5 crashes when I try to do anything with a certain 5 pages in document (even scroll past)

    I'm having issues with five pages within an InDesign document. 
    I was trying to export a document to PDF, but a couple of images weren't showing up on a couple of pages.  So I tried exporting to PDF in a couple of different ways to see if that would help.  It didn't.  Instead, InDesign started crashing constantly.  Turning Preflight off helped with that, and I was able to clear out any other potential problems (potentially problematic PDFs placed in the document, .eps images).  I tried exporting as .idml, but it created 4 kb files that couldn't be opened; I think InDesign was crashing before the file could finish exporting.  Now that I can get the document open for extended periods of time, I've tried exporting as a .idml file again, and it gets to 83% complete and doesn't finish.
    I started trying to export as PDF again, and by exporting parts of the document, I was able to narrow the problem down to pages 162-166.  I don't know what's different about these pages.  I have the PDF that I managed to export successfully before it started crashing constantly (the one with the missing images--and to clarify, these missing images aren't on any of the problem pages, so it appears to be an unrelated issue), and from looking at those pages, I can't see what the issue is.
    p. 162 - text and a table
    p. 163 - text and an image
    p. 164 - text
    p. 165 - text and an image
    p. 166 - text
    I can't even scroll past these pages.  Even in the Pages sidebar.  It crashes. Here is the crash log from when I tried to scroll past.  http://pastebin.com/B7ax4cAx
    Here's a crash report for when I try to export those pages to PDF:  http://pastebin.com/E6dA1igA
    I'm using CS5 on OS X 10.5.8.  When I started having these problems, I realized that I hadn't updated InDesign in awhile, so I updated to the latest.  I'm using 7.0.4 now. 

    Try reseting the preferences.
    or  delete Mark II folder from the location
    Windows 7/Vista: C:\ProgramData\Adobe\SING\Mark II
    Mac OS: [Startup Disk]/Library/Applications Support/Adobe/SING/Mark II
    It will fix this..
    This problem is pretty definitely not SING, so deleting the Mark II folder is not going to help. (It wont't hurt, though!)
    Resetting prefrences is always a good thing to try.
    I suspect it is a corrupt story thread of some sort. Moving pages to a new document, exporting stories to IDML, copying the file and deleting pages until the problem goes away...those are things I would try.

  • Can i see a LIST of all the things removed from MobileMe in the upgrade to iCloud?

    i have heard so many reports of things changed in MobileMe in the "upgrade" to iCloud, and i want to clarify these prior to switching over (i have already upgraded to iOS5 and 10.7.2) because from what i have heard some of these chages are going to mean a massive LOSS OF INFORMATION!!!
    based on how i have been using mobileme for the last 10 years (in it's various incarnations) i have heard that when you update:-
    1/ i am going to lose my 100's of photo websites in june 2012 (thanks guys!!)
    2/ i am going to lose most of the notes i have added to the over 1500 entries in my AddressBook (and some of those notes are VERY long and perfectly placed since they give me immediate access to data/info on the person/company in AB (this is a TERRIBLE DECISION IF TRUE) becaue apple had given a new charcter limit to Notes
    3/ my iphone now does not seem to play anything that was bought from beatport or freebies i have received from DJs (which i belive is linked to the size of the bit rate - some are 14100, rather than the 320 of itunes tracks) and which means i am either going to have to find another music player and/or stop buying music from any one other than itunes <<DUH>>
    4/ i have used my mac.com account in itunes to buy a LOT of stuff, different bits of which go on my iphone, ipad, etc (in fact the ipad is used by my mother who would have never ever have bought any apps, so i have adapted the ipad with the apps i think she would like - but i do not want these on my iphone) so am i going to have to repeatedly stop itunes form adding every new purchase from downloading itself to all my apple equipment??????
    quite frankly, if all the above is true (and i bet there are more to come ) then it is a ral smack in the face of long time apple users who have bought into the whole iDisk, MobileMe stuff in the past, and who have created a ersonal way of using them - i bought a family pack just so i could put different types of photo website up under my different"family" names - all of which were initially just for me to use!!!!!!!!!!!!
    so, please can you publish a list of all the things i am going to lose when i move to the icloud?????????????
    sees a fair request, but one which it also seems i have to ask for cos i cannot find a list such as this anywhere on the apple website

    You can see a detailed comparison between MobileMe and iCloud, plus general information and some links to Apple Help pages, here:
    http://rfwilmut.net/icloud
    Question 2 would be best asked as an individual question in the hope of attracting the attention of someone who is in the same situation and can give you a practical answer: question 3 would best be asked in the iPhone forum.

  • My Bill is not prorated

    A month and a half ago, I decided that I did not want to be a customer of Verizon anymore. I decided to port my number to AT&T, since it was in the middle of the month I wanted to make sure that I would not be charged for the rest of the month. Since talking with Customer Support on the phone is often misleading I came to ask the question to the branch I had signed up for my service in. I explained my intentions and I specifically asked if the bill for the month is going to be prorated or not. The representative confirmed that it would be prorated. Also I did not know my pin so I had go to the branch and change the pin for me. Then I started porting over my number. Later I called Verizon Customer Service to confirm, the representative said that the service was still active and I will be charged a fee for the full month. The I went to the branch again, because I wanted to clarify these two  controversial statements in person, an associate that was helping pulled up my account, saw the porting request and confirmed that the bill will be prorated and I would receive a final bill. Having got this confirmation, I went online and confirmed porting request with my new pin.
    I have not got the final bill via mail, and I could not log in into online system, instead I just received a notice that there was balance to pay. The number was too big, so I had to go to the branch and spend 1.5h to find out that that I was charged for the full month, because they don't prorate if port out your number. But it is controversial to what I was originally. I was in the branch before and after porting my number, every time I was told that the billing would be prorated. Unfortunately, talking to an associate and a store manager did not help.
    I think it makes sense to file a complaint, so I wonder if anyone had similar experience they would like to share?
    Thanks in advance!
    As a general advice: whenever you talk to someone from Verizon, make sure they put a note on you profile or try to get at least some sort of record that the conversation has happened and what it has been about.
    So far, I find that AT&T Customer Service is mush better and faster, will see how it goes further.
    Looking forward to your replies.

    If you ported out a day before your bill closing date you would have no further amount owed since you pay in advance for service up to that date.
    However you get no pro rata you just don't owe more to verizon. If you port out before you pay the next bill (one day after the bill closing date up to closing date you owe for the full month even though you ported out )
    You did not port out on the last day of you bill date so you will owe.
    Now you also did not need to call Verizon and tell them you were leaving. Simply walk into AT&T and give them your account number and pin. Which is normally the last four digits of your SSN.
    They do all the rest.
    You made the process much more difficult than it needed to be.
    Good Luck

Maybe you are looking for