CLASS CHARACTERISTICS

when i am trying to create class characteristics in additional tab reference to table field is display mode means i am unable to enter table & field name is there any body face this problem kindly suggest me how to activate.

have you tried to use "char" as I understand some of the things like selected set can only be used in consent with "Char"..

Similar Messages

Why Class characteristics req in QM

Hi QM Gurus,
I have inspection plan with MIC it is working very well.
But some of them told you can use class characteristics with MIC.
My question is.
1. What is the use of class characteristics?
2. why it is assign to MIC.
Please clarify....
Regards,
Babu.S

Dear Singh,
>1. What is the use of class characteristics?
It migrates the results recorded to the Batch Class.
>2. why it is assign to MIC.
Class Characteristic is assign to...
- 1. Batch Class, and this batch class is assigned to Material
- 2. With reference to this Class Characteristic, an MIC is created, and this MIC is getting assigned to the Inspection Plan/ Material Specification of the Material.
- Now when the RR is done for these MIC, in the inspection lot for the Material, the Values of Result, Migrates to the Batch, in the Batch Class.
To test the scenario
- Create a Characteristic (CT04)
- Create a Batch Class (CL02)
- Assign the Characteristic to the Batch Class.
- Assign the Batch Class to Material.
- Create an MIC, using the Characteristic (QS21)
- Assign the MIC to the Inspection Plan (QP01)/ Material Specification (QS61), of the Material.
- Create an Inspection Lot for the Material, have new Batch.
- Perform RR and UD.
- Now go to MMBE,MM02,BMBC,MSC3N, and check the value of the Result is Migrated here in the Batch, under Batch Class.
NOTE:-. It will not work if the material is not Batch Managed.
Let me know the progress.
Have Happy Week End!!!!!!!!
Regards,
Shyamal

Class characteristics req in QM

Hi
1. Why Class characteristics req in QM ?
2. I don't have any materials in batch managed, so in this case , is it really required?
3. If yes, in which all scenarios calss characteristics can be used?
Please explain.
Thanks,

1. Why Class characteristics req in QM ?
It migrates the results recorded to the Batch Class.
2. I don't have any materials in batch managed, so in this case , is it really required?
Yes
3. If yes, in which all scenarios calss characteristics can be used?
a) If you want pass the characteristics spec for variant configuration.
Pass the spec @ sales order level,
Pass the spec @ purchase order level.
For that above reason class characteristics req. in QM
Regards,
S.Babusingh

Transfer of Material Class characteristics into Batch

Hello,
Is there a way to transfer the material specific class characteristics ( maintained in material class 001) into Batch, while creating a new batch?
For e.g. for Material A, i have Material Class Characteristic = COLOR, with a value RED.
So if i create a new Batch for Material A, the COLOR characteristic in Batch should get defaulted to RED, instead of manually entering.
Pl let us know, if this is possible.
Regards,
Mangesh
P.S: I know there is Default check at the characteristic value level, but that doesn't help, as each material will have different value.

Dear,
You can use function module exit EXIT_SAPLV01Z_014 SAP enhancement SAPLV1ZN when assigning characteristic values to batches with EXTENDED_CLASSIFYING parameter. You use this to classify user-defined characteristics in the background when creating a new batch using the central function module VB_CREATE_BATCH during activated batch classification.
Refer IMG>Batch Mngmt>Characteristics Value Assignment>...using function module
Please try and come back.
Regards,
R.brahmankar
Edited by: R Brahmankar on Oct 11, 2010 4:39 PM

BAPI to upload customer class characteristics(XD02)

Hi,
My requirement is to upload Class Characteristics and its values for a customer in XD02.
XD02- > Extras -> Classification
I have founded a few bapi's but its not working. I tried the below options.
BAPI_CLASS_CREATE
BAPI_OBJCL_CREATE
If someone who worked on similar requirement ... Pls reply.
Thanks
Hari

BAPI_OBJCL_CREATE must work fou you
look at:
[BAPI BAPI_OBJCL_CREATE|BAPI BAPI_OBJCL_CREATE]
[Characteristics value not assigned by BAPI_OBJCL_CHANGE;
don't forget BAPI_TRANSACTION_COMMIT after this FM

Read Document Class Characteristics Values (Class Type 017)

Hi Gurus,
I want to read values of Document Class Characteristics (Class Type 017).
Is there any Functional Module available for this?
Best regards,
Abir.

Hi ,
Use this BAPI   BAPI_DOCUMENT_GETDETAIL2 to get the details of class and char values for particular documents.
kindly enter the data about the DIR and mark the ent
DOCUMENTTYPE                  DRW
DOCUMENTNUMBER            2000
DOCUMENTPART                 000
DOCUMENTVERSION            00
GETOBJECTLINKS                       X
GETCOMPONENTS
GETSTATUSLOG
GETLONGTEXTS                          X
GETACTIVEFILES
GETDOCDESCRIPTIONS               X
GETDOCFILES                             X
GETCLASSIFICATION                    X
GETSTRUCTURE
GETWHEREUSED
HOSTNAME
INHERITED
Here whatever marked as a 'X' BAPI will return the values for particular DIR.
Use TCODE SE37 for executing this BAPI or get the help of your technical person.
Regards
Abhiji A. Pachgade

BAPI for fill class characteristics

Hi,
Wich BAPI schould I use to fill class characteristics,
where class is associated with batch.
Please it's very important
Regards,
Greg.

BAPI_CLASS_ALLOC_GLOB_DEP      BAPI: Assign Global Dependencies to Class
BAPI_CLASS_CHANGE                      BAPI: Change Class
BAPI_CLASS_CHARVALUE_DEL_DEP   Class BAPI: Delete Local / Global Dependencies for Characteristic Valu
BAPI_CLASS_CHARVALUE_GLOB_DEP Class BAPI: Assign Global Dependencies to Characteristic Value
BAPI_CLASS_CHARVALUE_LOCAL_DEP Class BAPI: Maintain Local Dependency for Characteristic Value
BAPI_CLASS_CHARVALUE_READ_ALLO Class BAPI: Read Dependencies for Characteristic Value
BAPI_CLASS_CHAR_ALLOC_GLOB_DEP Class BAPI: Global Dependencies for Characteristic
BAPI_CLASS_CHAR_DELETE_DEP     Class BAPI: Delete Global / Local Dependency for Characteristic
BAPI_CLASS_CHAR_LOCAL_DEP      Class BAPI: Assign / Delete Local Dependency for Characteristic
BAPI_CLASS_CHAR_READ_ALLOC     Class BAPI: Read Dependencies for Characteristic
BAPI_CLASS_CHAR_VALUE_TEXT_DEL Class BAPI: Delete Overwriting of Long Text for Characteristic or Value
BAPI_CLASS_CHAR_VALUE_TEXT_OVR Class BAPI: Overwriting of Long Text for Characteristic or Value
Just check these FM
Regards,
Pavan P.

Class , Characteristics and Reference

Hi,
can someone please explain me the concept of Class , Characteristics & Reference usage in PM module?
Also related T-codes.
Regards,
Ram

Hello Ram,
Please go through this eBook for theoretical aspects CACLCHR
Also go through all links here in SAP Help
Take Tcodes from this page Tcodes (Tcodes starting with 'C' are more relevant for PM).
Now, few lines about concept in SAP-PM usage:
A class identifies a group of Equipments having identical specification parameters (ex. AC Squirrel Cage Induction Motor). So Equipments of all such motors are assigned this class. (Class is created with CL02). The parameters I mentioned (Current, RPM, KW etc, etc) are called Characteristics in SAP. (These are created with CT04). The characteristics created so, are then assigned to the class (CL02). The Equipments assigned such class will show these characteristics (in the Classification push button in IE02/IE03) and you will enter the characteristic values there. For ex.few equipments will have 11 KW, 18A, 1440RPM and some 7.5KW, 12A, 950 RPM and so on. After having this master data exercise, you can search the equipments by the Characteristic values through Tcode IE05. Also, go through the Tcodes given above.
Classes are used across modules, so it has Types. (002 is for PM, 001 is for Materials and so on)
KJogeswaraRao

Use OBJCLASS object of Emigall for Class & characteristics creation in FL

Hi Fritz,
Good day,
I want to use OBJCLASS object of Emigall for
Class and characteristics cration of Functional Location, The object is
desiged for Equipment only,
I read the document of this object which says
that it can be modify to use for functional location as well by changing
some rule, I tried by changing the field "Name of database table for
object" from the standard which is made for DEVICE/EQUIPMENT
I need your help to modify the rule to use this object for class and
characterstic creation for Functional Location, the migration object field is set to Device
which I want to change to FUNCLOC but that field is not modifiable.
Can you help me Fritz
Regards,
Robert

Robert,
Yes you are right. The following changes have to be made:
HEADER-OBJECT_TYPE need to be set to IFLOT (Fixed Value or Transfer field rule)
DATA-FIELD need to be set to TPLNR (Fixed Value or Transfer field rule)
DATA-VALUE need to be set to either CONNOBJ or DEVLOC (Via KSM field rule)
Kind regards,
Fritz

Traceability with batch class characteristics in batch where used list.

Hi,
I have a process order which issues 5 pallets or material and produces 5 pallets of another material. Each pallet is a seperate batch in my scenario.
All materials are assigned to a batch class and i will be using a class characteristic to enter the issued pallet number (includes material number and batch number) to the produced pallet batch. This way i want to create a traceability system.
the problem is i need a way to create a hierarchical view or integrate this scenario to batch where used list.
there is a badi for where used list to read external data. but i guess that is for something called "external batches"
can you please guide me for the best practice of doing this?
Thanks,
Alper,

Hi!,
I think you have to use the mix of two functionalities:
1. Original batch function
2. Batch derivation
This way you can pull the characteristics of the source material batch in to raw material as well as finish material batches.
In this you have to create a nonvaluated material which is used as original batch mateial. You have to assign this material in material master of the RM and FG alongwith other required entries. Also you have to use batch derivation function to pull the charactristics of this original material batch in to the RM and FG.
Please go through the SAP help regarding Original batch and Batch derivation function to have more clarity.
Please revert back in case of any further issue.
Regards,
Uday

How to see class/characteristics of measuring points in list editing screen

Dear Sirs,
I have created meauring points for several functional locations.These measuring points have been assigned classes and characteristics.
How can I see these charactristics against measuring points in list edition screen(ALV Grid).
Thanks and Regards,
R N Sabat.

Hi R N Sabat,
As per my knowledge , no std SAP transaction will show you asked details, You need to go for development of this report.
Please check with your technical team to get this in to ALV report.
Riyaj

Class & Characteristics in variant configuration

Hi PP guru's
Pl explain me in detail all the configuration path , spro , tcode for the above said .
thanx in advance
Regards,
Vimalbalaji

Dear Vimalbalaji,
<a href="http://www.sap-img.com/sap-sd/steps-for-sd-variant-configuration.htm">Steps for SD Variant Configuration</a> :
The procedure is as follows:
Create a Material - KMAT type with Item category (002)
Create Charateristics in CT04 - Zbike, where in values mention the Color of the bile like Red, Blue etc
Create another characteristics in CT04 - ZPrice, where directly go the additional data tab and maintain the table SDCOM and field VKOND (ABAP Dictionary it will ask for)
Assign these two characteristics to a Class in CL01 - ZBikeclass ( Type 300) in characteristics tab page.
Then go to CU41 Configuration profile select the material and enter the description click on the class assignment ie assign Zbikclass.
Now go back to CT04 - enter Zbike -go to values- select Red- go to extras - Other Dependencies - Select Procedure enter in front 10 write - $self.ZPrice='Red' and save
Now go back go to extras - Other Dependencies - assignments and assign relationship ( by default it will come just save)
Now select Blue- go to extras - Other Dependencies - Editor - Select Procedure enter in front of 10 write - $self.ZPrice='Blue' and save
Now go back go to extras - Other Dependencies - assignments and assign relationship ( by default it will come just save)
Now go to VK11 - Enter VA00 (Condition)(For Std RVA001 Pricing Procedure) - enter variant Red and Blue give the rates accordingly and create the sales order.
<a href="http://help.sap.com/saphelp_ides/helpdata/en/0a/857463c87611d1a7760000e8a5f6c8/content.htm">SAP Help Link for Variant Configuration for an Order BOM</a>.
<a href="http://www.sap-basis-abap.com/sd/steps-for-variant-configuration-and-pricing.htm">Steps for Variant Configuration and Pricing</a>
$ROOT is the highest-level configurable material in a configuration.
$PARENT refers to the object immediately above $SELF in a multi-level configuration.
The variable $PARENT has no meaning for the header material, because the header material has no superior materials.
In dependencies that are allocated to BOM items, $PARENT refers to the configurable material for which the BOM was created, whereas $SELF refers to the material of the BOM item.
$SELF is the material to which the dependency is allocated.
Regards,
Naveen.

Equipment, classes, characteristics, values

Hello,
I'm trying to list out all equipments that have classes assigned to them and i also want to see which characteristics and values are valid for that equipment. I want to have that in one overview.
transaction CL6BN comes very close, but i can not make a download from that transaction to excel (at least i can not find the option)
Does anyone know a transaction or table (table join) where i can find the needed information?
Thanks in advance for your help
Kind regards,
Peter

Hello Riyaj,
Thank you for the swift reply. It seems like a good solution. When go to the menu option i get the pop-up with the following classes:
AP06
P0103
AP01
P0101
AP05
F0102
F0101
P0106
P0108
P0109
P0112
AP03
P0105
AP04
CE01
G0101
G0102
G0103
Does this mean that of all the equipments in the list, only these classes are applicable to those equipments? I can not imagine, because if i check the class list, 182 equipment classes are supposed to be assigned...

Need link between Equipment- class- characteristics- values...

Hi Guys,
As per the customers requirement I have to list down all the equipments along with the respective corresponding values. The equipments are linked to the Characteristics by class type and class and then characteristics and then the the values that are assigned.
I am aware that the characteristics and the values are saved in the CABN and CAWN table and the link between them us the internal number.
Can any one please suggest me if there is a way to find a table link for equipment which are assignd to a Class type and hence a class and then these characteristics in CABN and values in CAWN.
Thanks in advance.
Anoop

Plesae post your question in the appropriate forum -- this is for Asset Accounting.

Eqpt - Class - Characteristics - Charac. Values( link table?)

Hi,
I have created a Eqpt and assigned a Class with Characteristics and assigned Charc.Values to it.
I wanted to generate a report where i wanted to extract a Charac.values assigned to the Eqpt.
Can anyone let me know the Tables / field names ?
Pl. help.
Edited by: rishi A on Sep 16, 2008 1:38 PM

Hi Rishi,
Use T Code: CL6BN
Raj

CLASS CHARACTERISTICS

Similar Messages

Maybe you are looking for