Class type has not been defined in Customizing as allowed for variant confi

Hi,
I want to use class type 200 in the varient configuration, but following error is showing so please reply me .
Class type 200 cannot be used for materials
Message no. CU731
Diagnosis
This class type has not been defined in Customizing as allowed for variant configuration.
Procedure
Choose a class type which is allowed for variant configuration.
Thanks

Thanks for ur reply.
please help me regarding my requirements
I will have to use the varient configuration. In this scenario multilevel BOM BOMis present & for every level varient is present.
so how to map this scenario, so that it should pop up at the time of sales order creation. i.e. it should ask that which varient should be used at all the levels in the BOM.
Thanks & Regards.
Abhi

Similar Messages

  • Order type has not been defined in sales area '1000','10','00'

    Hi Gurus
    I am getting this error when try to create order
    Order type has not been defined in sales area <'1000','10','00'>
    but I checked in the configuration and assigned
    SPRO:SALES:SALES : DOCUMENTS :SALE3S DOCUMENTS HEADER:
    ASSIGN SALES DOCUMENT TYPES : Assign sales order types permitted for sales are :1000 -10-00
    But still I am getting this problem when trying to creates sales order from va01.
    Thanks
    Kris

    SPRO --> Sales & Sistribution --> Sales --> Sales Document Header --> Assign Sales Area to Sales Document Type
    The above is one option.
    Also Check Sales Document Type in T.Vode: VOV8
    SPRO --> Sales & Sistribution --> Sales --> Sales Document Type
    whether The Sales Document Type is Block, which could also be a possible reason.
    Also check the Sales Area setting.
    Regards,
    Rajesh Banka
    Reward points if useful.

  • Order type 'OR' has not been defined in Sales area ','KR','89'

    while creating sales order in third party systems:-i got the following error:-
    Order type 'OR' has not been defined in Sales area <','KR','89'>
    Message no. V1502
    kindly give your valuable advice.
    Regards,
    willaim

    Hi,
    procedure for your Issue.
    SPRO-> SD> Sales> Sales Document> Sales Document Header> Assign Sales Area to Sales Document types-> Assign sales order types permitted for sales areas--> New Entry, here enter your Sales area( sales organization, dist. channel & Division) & OR ( order type) & save it.
    after doing this system will not generate the same error next time.
    cheers...
    manoj singh

  • Order type 'OR' has not been defined for sales area (IDOC related)

    Hi,
    iam getting the status error as order type 'OR' has not been defined for sales area for ORDERS inbound idoc(it's in status 51),i looked at EDPAR(voe4) table and edsdc(voe2) tables,  the sales area has been defined, i don't know why iam still getting this error. please let me know if anyone have any idea or faced any kind of this problem.
    Thanks

    Hi,
    I believe this is nothing to do with the setting the IDOC value..Some config is missing...
    Check to make sure if there is a record found in the view V_TVAKZ for the combination..
    IF not check with your function consultant regarding this..
    Thanks,
    Naren

  • A WebGroup/Virtual Host to handle /CourseLaunch.aspx has not been defined

    Hi Team,
    I am facing a strange issue. Through my java application I am trying to invoke a webservices of another third party application, which basically launches a course from there.
    I have integrated the webservices code (WSDL, proxy classes & servlet) in my EAR file.
    Whenever I try to launch a course from my application for the first time, A new window opens with a HTTP 404 error. In the log file it says:
    A WebGroup/Virtual Host to handle /elex/planner/CourseLaunch.aspx has not been defined.
    But if I close this error page & try to relaunch the same course from my application, the course loads perfectly. Do you know what might be causing this issue.
    I am invoking a 3rd party URL from my servlet as shown below:
    String launchURL = launchBaseURL + packid + "&elexssotoken=" + userkey;
    System.out.println("launchURL:" + launchURL);
    httpresponse.sendRedirect(launchURL);
    here the launch launchBaseURL=http://abc.com/elex/planner/CourseLaunch.aspx?_courseCode=
    In my Sysout the URL is generated correctly i.e
    http://abc.com/elex/planner/CourseLaunch.aspx?_courseCode=M-PTOS&elexssotoken=89bce4e0-c36d-4dc0-a9a2-0450c709cf64
    but on checking the HTTP traffic, I see the following flow
    #     Result     Protocol     Host     URL     Body     Caching     Content-Type     Process     Comments     Custom     
    9243     302     HTTP     abc.com     /elex/planner/CourseLaunch.aspx?_courseCode=M-PTOS&elexssotoken=89bce4e0-c36d-4dc0-a9a2-0450c709cf64     221     private      text/html; charset=utf-8     iexplore:1440     
    followed by:
    #     Result     Protocol     Host     URL     Body     Caching     Content-Type     Process     Comments     Custom     
    9248     404     HTTP     mywebapp.com:9085     /elex/planner/CourseLaunch.aspx?_courseCode=M-PTOS&elexssotoken=89bce4e0-c36d-4dc0-a9a2-0450c709cf64     273          text/html     iexplore:1440               
    Here I see that host abc.com is followed by mywebapp.com which I think is causing this issue. But I am not sure why it gets redirected to mywebapp.com when I launch the course for the 1st time, but works fine when I relaunch the same course again.

    I'm not getting what the hard part is: you're requesting a resource that doesn't exist. You're requesting something under 'helpSet0' and no such thing exists on your server. What do you exactly mean by I've tried all sorts of things that "should" work ?

  • Run AFAB, Error Msg: Depreciation area 00 has not been defined in company

    Hi,Dear all,
    My SAP System is ECC5.0 ,this is a new system , now i work client is 800,i configure img
    complete, i used t-code AS91 to upload some asset records. when i use t-code AFAB to run
    depreciation , the system show error message ,the errot msg as follows:
    Contact your system administrator (table error)
    Message no. AA833
    Diagnosis
    Depreciation area 00 has not been defined in company code 1670.
    Procedure
    Define the depreciation area using the Customizing menu.
    i was suspicious of the asset records have some mistake ,so i reset company code in fixed
    asset , and i reload the asset records ,when rerun AFAB ,it show the same mistake message
    AA833 again.
    then ,i copy the client 800 to client 500, and reload the asset records in client 500 ,run AFAB ,the also
    show the same message !!
    by the way ,i upload records use LSMW ,
    I don't know the reason ,
    what shall i do ?
    expert,
    can you give me a solution ?
    Thanks

    Hi,
    u have to assign depre area to ur company code..
    Please check.. you have to done step as following
    1. Copy Reference Chart of Depreciation/Depreciation Areas (Asset accounting -> organization structures -> Copy Reference Chart of Depreciation/Depreciation Areas)
    2. Assign Chart of Depreciation to Company Code(OAOB)     
    3. Define Depreciation Areas for Foreign Currencies(OAYH)     
    4. How depreciation areas post to the general ledger(Customizing FI-AA > Integration with the General Ledger > Define How Depreciation Areas Post to General Ledger)
    5. Specify Financial Statement Version for Asset Reports(OAYN)     
    Hope this help.
    Regards.
    Message was edited by:
            Bird

  • Could not use the clone stamp tool because the area to clone has not been defined (option-click to d

    Could not use the clone stamp tool because the area to clone has not been defined (option-click to define a source point). this is what shows up in the command box when ever I click to start to pick the spot i want to use as the clone. makes my cloning tool useless. can any one help? I have reset the tools restrted my computer. i am at a loss...

    Are you working with more than one layer?  If you are working with multiple layers it makes a difference when selecting source spot and then trying to clone to a different layer.  I find that I have to be sure I am selecting the corresponding layers for source and then for application when working within multiple layers.
    At least for me this is the case when getting that type of message.  I am very new to this program though, so maybe someone else has a more concise answer for you.
    Good luck and write again if this doesn't help.
    Moon52
    Sent from my iPhone

  • AFAB, Error Message Depreciation area 00 has not been defined in company co

    Hi,Dear all,
    My SAP System is ECC5.0 ,this is a new system , now i work client is 800,i configure img
    complete,  i used t-code AS91 to upload some asset records. when i use t-code AFAB to run
    depreciation , the system show error message ,the errot msg as follows:
    Contact your system administrator (table error)
    Message no. AA833
    Diagnosis
    Depreciation area 00 has not been defined in company code 1670.
    Procedure
    Define the depreciation area using the Customizing menu.
    i was suspicious of the asset records have some mistake ,so i reset company code in fixed
    asset , and i reload the asset records ,when rerun AFAB ,it show the same mistake message
    AA833 again.
    then ,i copy the client 800 to client 500, and reload the asset records in client 500 ,run AFAB ,the also
    show the same message !!
    by the way ,i upload records use LSMW ,
    I don't know the reason ,
    what shall i do ?
    expert,
    can you give me a solution ?
    Thanks

    Hi,
    u have to assign depre area to ur company code..
    Please check.. you have to done step as following
    1. Copy Reference Chart of Depreciation/Depreciation Areas (Asset accounting -> organization structures -> Copy Reference Chart of Depreciation/Depreciation Areas)
    2. Assign Chart of Depreciation to Company Code(OAOB)     
    3. Define Depreciation Areas for Foreign Currencies(OAYH)     
    4. How depreciation areas post to the general ledger(Customizing FI-AA > Integration with the General Ledger > Define How Depreciation Areas Post to General Ledger)
    5. Specify Financial Statement Version for Asset Reports(OAYN)     
    Hope this help.
    Regards.
    Message was edited by:
            Bird

  • The group transfer account has not been defined  Error message KM124

    Hi,
    Friends,
    i
    When my user is posting  a logistical vendor invoice for intercompany vendor  the system issues error message KM124 "The group transfer account has not been defined.
    I have seen SDN there was a posting but no response.
    Can you suggest me how we can work on this error.
    Thank you
    Medha

    Hi Firends,
    One of my user is also getting the same error,  user is posting a logistical vendor invoice for intercompany vendor the system issues error message KM124 "The group transfer account has not been defined.
    I have checked the 8KEN and OX15 customizing also.. it seems to be fine.
    Please can you guide me in regards to this error.
    Thanks and Regards,
    Rahul.

  • Context.root has not been defined

    I am trying to compile .mxml file using flex builder 3. I am using BlazeDS to run it from C:\Program Files\blazeds\tomcat\webapps\BlazeDSmsgService. I also copied the WEB-INF folder at my project folder (BlazeDSmsgService) I am getting the following error.
    The services configuration includes a channel-definition 'my-amf' that has an endpoint with a context.root token but a context root has not been defined. Please specify a context-root compiler argument.
    I was finally able to fix and run my project!
    When setting up the flex project, choose J2EE server technology and specifiy  BlazeDS server location and context root to your project. This should do it.

    Make sure your context root is defined in the project properties.  This is at "project/properties/Flex Server" from the menubar or package explorer context menu.  Alternately, you can hardcode your context root in the services-config.xml file/channel definition.

  • Could not use the clone stamp tool because the area to clone has not been defined

    Freshly installed Elements 10.  Can not use the option-mouse click to define an area for the clone stamp.  The error I get is:
    Could not use the clone stamp tool because the area to clone has not been defined (option-click to define a source point).
    New Mac Mini.  Had the same problems in Elements 9 so I installed the 10 trial.  Is this a key binding error?  Did not have this issue with Elements 9 on my Mac Air or my Windows 7 system. 
    I'm not a newbie and know how to use the clone tool.  I won't say I'm an expert so if it's something related to layers please throw out some ideas.

    This problem came back up.  I hadn't used PSE since last November and was frustrated to run into it again.  I don't think it's a layers issue afterall.
    I use a wireless keyboard and mouse on Mini and mouse on Air, although keyboard for Air is upstairs at a desk with monitor for occasional use.  Regardless blue tooth is on for these devices.  Problem exists.  Turn bluetooth off on Air and the problem is gone.  It must be related to option key when bluetooth is on, I guess some different mapping.  Even when I have bluetooth on and try to use Option key on the Air keyboard it does not work.
    So now where do I look for configs to check?

  • "Could not use the clone stamp because the area to clone has not been defined (Alt-click to define a source point)".

    Few users access our Photoshop through Citrix on a mac but use a Windows 7 platform once they're in Citrix.  They're all having issues using the Clone Stamp tool.  Get the error "Could not use the clone stamp because the area to clone has not been defined (Alt-click to define a source point)". We've reset the clone stamp tool, reset all the tools, and reset the preferences. We've made sure that we're in All Layers.  Nothing seems to be working.  None of the other forums helped either.  Adobe support is no help either.
    Thanks,
    Moe.

    Did you check with Citrix support?  Did you try both of the Alt keys.

  • A prompt that says "Could not use the clone stamp because the are to clone has not been defined (option-click to define a source point), appears EVERY time I try to use the clone stamp. What is wrong and how can I fix this

    A prompt that says "Could not use the clone stamp because the are to clone has not been defined (option-click to define a source point), appears EVERY time I try to use the clone stamp. What is wrong and how can I fix this?

    If a tool is acting up, one suggestion is to reset the tool.
    Ctrl-click on the clone tool icon in the Options bar and select Reset Tool.

  • Account for bank transfer has not been defined

    Hi,
    I am doing a Bank Transfer in my SDK development and I get following error:
    "Account for bank transfer has not been defined "
    I use _SYS00000000002 (Cash at Bank - Checking (HO, USA, GA )) from the US demo database for testing and it doesn't work.
    My code is below, even when this only for consuling.
    Thank you,
    Rune
    oPayments = (SAPbobsCOM.Payments)oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oIncomingPayments);
                        oPayments.CardCode = vmp_CardCode_string;
                        oPayments.DocDate = DateTime.Now;
                        oPayments.JournalRemarks = "Incoming - Payment Bank Transfer";
                        oPayments.TaxDate = DateTime.Now;
                        SAPbobsCOM.Recordset oRecordset_BankAccount = null;
                        oRecordset_BankAccount = ((SAPbobsCOM.Recordset)(oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset)));
                        oRecordset_BankAccount.DoQuery("SELECT * FROM [dbo].[@PAY_TYPE] WHERE [U_PayMethod] = '01'");
                        oRecordset_BankAccount.MoveFirst();
                        if (oRecordset_BankAccount.EoF == true) // No Records
                        else
                            vmp_BankAccount_string = Convert.ToString(oRecordset_BankAccount.Fields.Item("U_BankAccount").Value);
                        oPayments.TransferAccount = vmp_BankAccount_string;// "_SYS00000000343"; //"1010140-001";
                        oPayments.TransferDate = DateTime.Now;
                        oPayments.TransferReference = vmp_CardCode_string;
                        oPayments.TransferSum = vmp_Amount_double;
                        vc_Message_Result_Int32 = oPayments.Add();
    Edited by: Rune Brattas on Jun 18, 2009 5:18 PM

    Hi,
    I request you to post this thread in SDK forum,so that you may get quick response.
    And kindly close this thread after posting in the appropriate forum.

  • Found error:-5011,[JDT1.Account][line1]  ' tax account  has not been define

    hi expert all
    Found error:-5011,[JDT1.Account][line1]  ' tax account  has not been define for selec ted tax code'....
    when i add this journal entry  following error is coming
    where  need changes please tell me......... very much required..
    Private Sub JournalEntry2(ByVal accntcode1 As String, ByVal newaccnt1 As String, ByVal newaccnt2 As String, ByVal newaccnt3 As String, ByVal newaccnt4 As String, ByVal newaccnt5 As String, ByVal str7 As String, ByVal value As Decimal, ByVal value1 As Decimal, ByVal value2 As Decimal, ByVal value3 As Decimal, ByVal value4 As Decimal, ByVal value5 As Decimal, ByVal value6 As Decimal)
            On Error GoTo ErrorHandler
            Dim nErr As Long
            Dim errMsg As String
            'add an Journal entry
            Dim vJE As SAPbobsCOM.JournalEntries
            vJE = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oJournalEntries) '(oJournalEntries)
            Call vJE.Lines.SetCurrentLine(0)
            ' vJE.TaxDate = Now
            vJE.Lines.AccountCode = accntcode1 '"110000"   '''''''o
            vJE.Lines.ContraAccount = accntcode1 '"10110"
            vJE.Lines.Credit = 0
            vJE.Lines.Debit = value '150
            vJE.Lines.DueDate = CDate(Now)
            vJE.Lines.ReferenceDate1 = Now
            vJE.Lines.ShortName = accntcode1  '"110000"
            '  vJE.Lines.TaxDate = Now
            Call vJE.Lines.Add()
            Call vJE.Lines.SetCurrentLine(1)
            vJE.Lines.AccountCode = newaccnt1 '"10110"      ''''''' 1
            vJE.Lines.ContraAccount = newaccnt1  '"110000"
            vJE.Lines.Credit = value1  '''' 50 '150
            vJE.Lines.Debit = 0
            vJE.Lines.DueDate = CDate(Now) 'CDate("11/13/ 2002")
            'vJE.Lines.Line_ID = 1
            vJE.Lines.ReferenceDate1 = Now
            vJE.Lines.ShortName = newaccnt1  '"10110"
            'vJE.Lines.TaxDate = Now
            Call vJE.Lines.Add()
            Call vJE.Lines.SetCurrentLine(2)
            vJE.Lines.AccountCode = newaccnt2 '"10110"     '''''' 2
            vJE.Lines.ContraAccount = newaccnt2 '"110000"
            vJE.Lines.Credit = value2       ''40 '150
            vJE.Lines.Debit = 0
            vJE.Lines.DueDate = CDate(Now) 'CDate("11/13/ 2002")
            'vJE.Lines.Line_ID = 1
            vJE.Lines.ReferenceDate1 = Now
            vJE.Lines.ShortName = newaccnt2   '"10110"
            'vJE.Lines.TaxDate = Now
            Call vJE.Lines.Add()
            Call vJE.Lines.SetCurrentLine(3)
            vJE.Lines.AccountCode = newaccnt3 '"10110"     '''''' 3
            vJE.Lines.ContraAccount = newaccnt3 '"110000"
            vJE.Lines.Credit = value3      ' ''' 20 '150
            vJE.Lines.Debit = 0
            vJE.Lines.DueDate = CDate(Now) 'CDate("11/13/ 2002")
            'vJE.Lines.Line_ID = 1
            vJE.Lines.ReferenceDate1 = Now
            vJE.Lines.ShortName = newaccnt3  '"10110"
            'vJE.Lines.TaxDate = Now
            Call vJE.Lines.Add()
            Call vJE.Lines.SetCurrentLine(4)
            vJE.Lines.AccountCode = newaccnt4 '"10110"     '''''' 4
            vJE.Lines.ContraAccount = newaccnt4 '"110000"
            vJE.Lines.Credit = value4     ''20 '150
            vJE.Lines.Debit = 0
            vJE.Lines.DueDate = CDate(Now) 'CDate("11/13/ 2002")
            'vJE.Lines.Line_ID = 1
            vJE.Lines.ReferenceDate1 = Now
            vJE.Lines.ShortName = newaccnt4  '"10110"
            'vJE.Lines.TaxDate = Now
            Call vJE.Lines.Add()
            Call vJE.Lines.SetCurrentLine(5)
            vJE.Lines.AccountCode = newaccnt5 '"10110"     '''''' 5
            vJE.Lines.ContraAccount = newaccnt5 '"110000"
            vJE.Lines.Credit = value5  ''''20 '150
            vJE.Lines.Debit = 0
            vJE.Lines.DueDate = CDate(Now) 'CDate("11/13/ 2002")
            'vJE.Lines.Line_ID = 1
            vJE.Lines.ReferenceDate1 = Now
            vJE.Lines.ShortName = newaccnt5  '"10110"
            'vJE.Lines.TaxDate = Now
            Call vJE.Lines.Add()
            Call vJE.Lines.SetCurrentLine(6)
            value6 = value - (value1 + value3 + value2 + value4 + value5)
            vJE.Lines.Credit = value6  ''''20 '150
            vJE.Lines.Debit = 0
            vJE.Lines.DueDate = CDate(Now) 'CDate("11/13/ 2002")
            vJE.Lines.ReferenceDate1 = Now
            vJE.Lines.ShortName = str7  '"10110"
            'vJE.Lines.TaxDate = Now
            If (0 <> vJE.Add()) Then
                MsgBox("failed to add a journal entry")
            Else
                MsgBox("Succeeded in adding a journal entry")
                vJE.SaveXML("c:\temp\JournalEntries" + Str(vJE.JdtNum) + ".xml")
            End If
            'Check Error
            Call oCompany.GetLastError(nErr, errMsg)
            If (0 <> nErr) Then
                MsgBox("Found error:" + Str(nErr) + "," + errMsg)
            End If
            'disconnect the company object, and release resource
            'Call oCompany.Disconnect()
            'oCompany = Nothing
            Exit Sub
    ErrorHandler:
            'MsgBox("Exception:" + Err.Description)
        End Sub

    Hi John,
    I would try first to add the same JE is the Business One application. If it adds without any error then the problem is not related to any definitions of Business One.
    From your error and your code it does seem the error is related to the use of the property ShortName - you only use the ShortName if you are adding a JE line for a BP. If you want to add a JE line for a regular account number then you ONLY use the property AccountCode and don't set ShortName.
    Cheers,
    Lisa

Maybe you are looking for