Classic 9 and HP Scanjet 5370C

when double clicking on desktop HP Scanner I get;
could not be opened GEARPPCS could not be found
comments ?
thanks
Pat
power mac G4 400mhz Mac OS X (10.4.3) classic 9 and 9.2.2

Hi, Pat -
Try rebuilding the desktop.
Article #10182 - Rebuilding Desktop File and Icon Recovery
It might also be that GEARPPCS, or another HP file that uses GEARPPCS, has become damaged, and as a result is unusable. The solution for that would be to delete the HP software for the scanner, then re-install it from a trusted source.
For some reason, Control Strip modules for scanners seem to be prone to self-destruction.

Similar Messages

I was trying to sync my 120GB iPod Classic earlier and it said it couldn't sync as the iPod disk could not be "read" or "written to". I now can't get anything onto my iPod, and I was wondering if it is a hard drive problem? Any help appreciated. Thanks.

I was trying to sync my 120GB iPod Classic earlier, and it said it couldn't sync as the iPod disk could not be "read" or "written to." I now can't get anything onto my iPod, and I was wondering if it is a hard drive problem? Any help appreciated. Thanks.

Did you go into iTunes to change the location of your media files? if not you will need to go into iTunes and click on preference and select the advance tab then click the iTunes Media folder location. Select the location of your on external hard drive.

. I am new to IPods. I have a Classic 160GB and I can't figure out how to load my music videos to it. I have had no problem loading my music CD's but no go with the music videos I have. Please HELP. Thanks maxsdad

Hello:
I am new to IPods. I have a Classic 160GB and I can't figure out how to load Music Videos to iTunes or the IPod. I have had no problem loading my CD's to iTunes and to the IPod, but no go on the Music Videos.
Please Help
maxsdad

B-Rock:
Ok. Here's the results. I tried all the music videos I wanted to put onto the IPod and the results were:
I was able to get good results with 2 full length music videos and 2 video singles(only 2 videos on each disk). For a total of 4 videos.
I was able to encode 5 full length music videos, but the results were distorted (video and audio).
I was unable to copy 2 full length videos due to error failures. 1 was a "No Title Found" error, the other was a "NAVDAT" error.
I guess my next question is: Do you know of any other program(s) that I might try, to see if I can get good results with the videos that didn't work with Handbrake?
Thanks again for all your help.
maxsdad

TS1382 I have a ipod classic 160GB and it's not showing any music anymore, but there is still 7GB of memory being used, and I don't have it back up on my itunes, since I had to put a new hard drive on my computer. Any suggestion to find out whats on that

I have a ipod classic 160GB and it's not showing any music anymore, but there is still showing 7GB of memory being used, and I don't have it backed up on my itunes, since I had to put a new hard drive on my computer. Any suggestion to find out whats on that memory or to get it the music back, there is approximately over 1400 songs on it?

What is the memory being used by, is it Other? If it is, that means the iPod can no longer read the music, so it has put it all in "Other".
The usual fix for this is to allow the iPod to Sync with its iTunes Library. If that doesn't work, the next option is to Restore the iPod using the Restore command in iTunes, on the Device/Summary pane.
Unless you are very (very) lucky, I suspect that you are going to have to Restore your iPod. Restoring will remove everything form the iPod and put back onto it only what it finds in your iTunes Library, which you say is currently empty.
If you have to rebuild your Library after this issue, by adding all the music back again, this is going to be hard to hear, but for the future, you may want to consider always having a backup of your library. The easiset way to back the Library up is;
if the Library is small enough, burn it to a DVD, as digital files, not a "music CD".
If your Library is too large for a DVD, buy yourself an external hard drive and copy the Library onto the drive. Remember to update the backup every so often.

How to install drivers for HP Color Laserjet 1215 and HP Scanjet G2410 on Mavericks?

I recently purchased MacBook Pro and upgraded the OS to Mavericks. I am unable to find drivers for my HP Color Laserjer CP1215 printer and HP Scanjet G2410 scanner which I was using with HP Laptop. Google search yielded instructions at http://foo2zjs.rkkda.com/INSTALL.osx for the HP CP1215 printer. However, the instructions don't seem to be working on Mavericks. So, I am stuck with a printer and scanner which don't work with Mac. Thanks in advance for any help.
Ajit Singh

I don't see either of those models on http://support.apple.com/kb/HT3669. You should probably check with HP to see if they are still supported.
https://discussions.apple.com/message/23611767#23611767

I have an iPod Classic 160GB and now it will not sync. I have restored to factory settings multiple times. It freezes during sync, gives -50 error code and says video is not supported on iPod. Please help.

I have an iPod Classic 160GB and now it will not sync. I have restored to factory settings multiple times. It freezes during sync, gives -50 error code and says video is not supported on iPod. Please help.

This is the iPod touch forum. I requested the moderators to move your post to the iPod classic forum.

TA48312 i need software for HP ScanJet 5370c to OSX 10.5.8

Hallo
Ich benötige Treiber für meinen HP Scanner ScanJet 5370c für das OSX 10.5.8.
BITTE Helfen Sie Mir!!!
MfG

<http://www.hamrick.com>

Number of Classical , Interactive and ALV reports in Project.

Hi,
I am new to ABAP.
Can anybody please tell me how many Classical , Interactive and ALV reports will be there in a approximate one year span of project ? and how many input parameters ( Select-options) will be there in a report. if you send the some sample input parameters in a report how it looks in real time will help me to practice and for the interviews.
Thanks,
Maanasa..

Maanasa,
Welcome to SDN
It entirely depends upon the project, on your team and on the specs of the requirement....
From interview point of view no body is going to ask u such questions, becz there is no specific answer for such question.
~~Guduri

What iMacs run System 9 software in Classic Mode and also iLife in Sys 10?

I understand that there were versions of System 10 that ran on iMac G3s that would run old System 9 software in Classic Mode, and also would run iLife (special interest in Garage Band and iMovie). What model of iMac would do this? What hardware requirements should I look for? What would be the optimal configuration to do what I'm trying to do?
Can I hook up an external floppy drive to an iMac? Are those drive still easily acquirable?
What versions of systems 10 ran in Classic mode? I've heard that System 10 with Classic mode can be buggy. How significant is this? When did System 10 stop running in Classic mode? Is it traditionsal to get System disks included when you buy an iMac off of eBay?
Thanx.

Ed,
The last version that would boot into classic is 10.4.X (.11 last version). That said I was never a fan of classic mode. It never seemed right to me that's why I set those few up as dual booters. They were used in a classroom with pre k thru middle school kids.
If you are using classic mode and it runs good for you than go for it.
My computer at school runs at 600 Mhz and has 256 Mb of memory. How much memory would you suggest.
Tiger will actually run at 256 but would be better at 512 or 768.
How would a machine like that do as part of a wireless network?
It should do fine. It will need a special adapter (which I can supply) and the original Airport Card.
Could it be connected to a network that's administered by a PC?
Should be no problem. Our's is set up that way and wireless Macs work fine. The problem I've seen w/ PC administered networks is the Administrator him/herself.
what is a G3 slot loader?
There were two types of G3 iMacs, the early tray loaders and the later slot loaders.
700 and 800 eMacs will also run OS 9.
So I just upgraded our music room at the school. It has iMac G3s 450 - 600s, eMac 1.25s, G4 Minis and Intel Minis. So we're running iLife 09 and 05.
Garage Band 09 will only run in 10.5.6 and that will only run on a G4 or better w/ a processor 867 MHz or faster. My son runs it on his eMac 1.25 GHz w/ 1.5 GB RAM.
Oh for your kid check out Kid's Pix 4 it runs in either OS. Our kids are also crazy about Zoombinis.
Richard
Message was edited by: spudnuty

Classic wht and extended wht

hi,
may i know what is the difference between classic wht and extended wht? can advise what is the major difference between these two?
thanks

Hi,
Classic WHT- In some countries, the law provides that invoice recipients must withhold a certain portion of the payment amount and pay this to the tax authorities as withholding tax on behalf of the vendor. This requirement exists in the United Kingdom, for example. In other countries, withholding tax need only be reported to the tax authorities for certain vendors, such as self-employed people. Withholding tax is not posted in these countries. This is the case in France, for example.
Withholding tax amounts are reported to the tax authorities at regular intervals and a statement is also sent to the vendor periodically. These reporting periods vary from country to country.
The way in which withholding tax is calculated depends on the type of service. Transactions may:
Have a variable base for tax/SI contributions
Have different tax rates
Not relevant for withholding tax
EWHT-With extended withholding tax, you can process withholding tax from both the vendor and customer view.
In Accounts Payable, the vendor is the person subject to tax, and the company code is obligated to deduct withholding tax and pay this over to the tax authorities on the vendoru2019s behalf. In Accounts Receivable, the company code itself is subject to tax, and the customers that do business with this company code deduct withholding tax and pay this over to the tax authorities on the company codeu2019s behalf. In both cases, the business partner of the person/entity subject to tax deducts the tax and pays it over to the tax authorities.
Withholding tax is calculated and posted to the appropriate withholding tax accounts at different stages, depending on the legal requirements in each country. As a rule, withholding tax is posted at the same time that the payment is posted, in other words the outgoing payment (Accounts Payable) or incoming payment (Accounts Receivable), is reduced by the withholding tax amount.
In certain countries, such as Brazil, the Philippines, and Spain, withholding tax can or must be posted when the invoice is posted. This means that the amount receivable or payable is reduced by the withholding tax amount.
Extended withholding tax supports both concepts.
The key concept in extended withholding tax is the distinction between withholding tax type and withholding tax code. While withholding tax types represent basic calculation rules, specific features of these rules - in particular the percentage rate - are represented by the withholding tax code. You can define any number of withholding tax codes for a given withholding tax type.
If a particular transaction requires more than one kind of withholding tax, this is covered in the SAP System by defining more than one withholding tax type. When entering a line item, you can enter withholding tax data for each of these withholding tax types.
For more information about the functions of extended withholding tax (in comparison to classic withholding tax), see Withholding Tax
The following special features also exist:
In some countries, such as Argentina and Italy, other kinds of posting are required for certain business transactions. Instead of the payment amount being reduced by the withholding tax amount, the withholding tax is posted as an offsetting entry to an expense account You make the relevant settings in the withholding tax code.
Where cleared items are reset, the clearing document is automatically reversed if it contains withholding tax data. For withholding tax types with accumulation, the accumulation base amount is adjusted if the payment document is reversed.
Hope this helps.
Rgds
Manish

How differentiate POs classic scenario and POs extended classic scenario?

Hi Gurus,
Is possible determine that some POs are generated in SRM system and send to R3 (Extended classic scenario) and other POs only to send from SRM to R3 system (classic scenario) in the same system?
How we can differentiate which POs should be sent to R3 (classic scenario) and which not? Is possible use type of document for example? Could you explain me if exists standard process?
The objective is determining the following: Is necessary differentiating POs created in SRM of importation and should be sent to R3 system (classic scenario), and in case of local POs (not importation) is necessary extended classic scenario.
I have understood that there is a scenario that includes the Classic and Extended Classic, I think is called Decoupled scenario.
Thanks for your help!!

Hello,
Yes this is possible.
You can do it automatically based on the product category. You must define the back-end system you wish to use for each product category by making the relevant settings in Customizing for SAP SRM under SRM Server --> Technical Basic Settings --> Define Backend System for Product Category
Check the online documentation here: http://help.sap.com/saphelp_srm701/helpdata/en/f3/6f505050404ce99151722a79a2c089/frameset.htm
You can also use Business Add-In BBP_EXTLOCALPO_BADI to overwrite settings made in Activate Extended Classic Scenario and implement more rues for the scenario determination, e.g. based on the purchasing organization for manually created PO's.
First you set you system to Activate Extended Classic Scenario : SPRO --> SAP Supplier Relationship Management --> SRM Server --> Cross-Application Basic Settings --> Activate Extended Classic Scenario.
Then you set exceptions in the BAdI.
Regards
Franck

Switching between the Classic View and the Tree View in transaction FEBA

Hi All
I would like to know how to switch between the Classic View and the Tree View on transaction FEBA for post processing of bank statements. I have a scenario where in the DEV client the transaction is calling up the Tree View and in my QA environment it calls up the Classic View, and I would like to know if there is a way to easily switch between the two views.
I'd appreciate your assistance.

Hi,
I think you can do the same using transaction codes FEBA and FEBAN.
Thanks
Aravind

I just upgraded my older G5 from tiger to leopard and it is now at 10.5.8, I was unaware that the new system did not support the classic envoirnment and cannot access my 6.0 version of Photoshop, which I use often...how do I get P.S. going again?

I just upgraded my older G5 from tiger to leopard and it is now at 10.5.8, I was unaware that the new system did not support the classic envoirnment and cannot access my 6.0 version of Photoshop, which I use often...how do I get P.S. up and going again?

Niel...
I installed Leopard 10.5.6 and then it upgraded to 10.5.8, when I installed it I had the old info saved to a "previous systems" folder, where most of my artwork, etc. were saved, I have a one terabyte Lacie backup that unfortunately did not work as it was intended...it saved the new info and not the old. I did look into the system preferences folder and found the classic file, of course it wouldn't launch...but I have the old G 5 startup discs and will try to do it as you stated. I will try also to move it out of the previous folders file to my hard drive and see how that works.
thank you for your time and help,
Dennis

Installing classic illustrator and photoshop to Mac os Tiger

How can I install classic illustrator and photoshop applications to Mac os Tiger
Mac OS X (10.4)

Illustrator 10 and Photoshop 7 were the first OSX version, the next version of each they called CS (for Creative Suite, they were really pushing buy the Suite of 4 or 5 Adobe programs which cost big bucks) and the latest versions are CS2. I've heard of many having problems with CS2 so I haven't upgraded. Both Illustrator CS and Photoshop CS work well in Tiger.
But!!... on an Intel Mac programs need to be Universal versions, specifically designed to run on Intel Macs, older version can run but will open in to an emulation mode, Rosetta, that runs much slower, you will be running at least 50% slower than on a G5. But it's not like Classic, you won't even know when Rosetta is running.
And, apparently there are problems converting Illustrator and Photoshop to Universal and it's going to take a while. The rumor is that CS2 will not be updated, you'll have to wait for CS3 and there is no planned release date for that yet.
On the other hand, I read a recent article that said if you install Windows XP on an Intel Mac (Apple has a free program called Boot Camp that will do this but you need to buy XP), then the XP version of Photoshop will run really fast, faster than most boxes running XP. Oooo, the irony!
Anyway, there is a program that allows you to run a Classic emulation on the Intel Macs but I can't find my bookmark on it so you'll have to do a web search (or someone can post it).
I'm assuming you already have the Classic versions. You'd probably be better off getting the Classic emulation and running those until Adobe upgrades to Universal software. Kind of a waste to spend the bucks on brand new versions of Illustrator and Photoshop now when the versions you need are probably a year away.

Hi, Just bought an ipod classic 160gb and i notice that when I turn the volume down all the way, music is still heard, i.e. I cannot turn it down lower than a certain volume. Is there a fix for this? Thanks

Hi, Just bought an ipod classic 160gb and i notice that when I turn the volume down all the way, music is still heard, i.e. I cannot turn it down lower than a certain volume. Is there a fix for this? Thanks

I've got a feeling that's the way it is. I know that if I turn the volume down all the way, I can still hear the music very softly -- which is great for listening when I have a migraine!

Classic 9 and HP Scanjet 5370C

Similar Messages

Maybe you are looking for