Classic always loads at startup (reboot), when not wanted

I used an old version of Quark XPress last week (because Quark 6 is such a beast in OSX, but that's another story), so of course launching prompted the simultaneous loading of the Classic flavor of OS9. I completed the work I was doing at that time (actually I gave up reviving a newly-corrupted Quark file, but that's another story) and now a week later after multiple reboots each time I am getting Classic loaded at the same time. When I go into Classic under System Preferences, the box labeled "Start Classic when you log in" is NOT checked.
How can I get rid of this added parasite to my bootup routine, when it is not needed?

go to system preferences, click accounts and then click the login items tab. What applications are in the list, if one of them says something about classic click it and the click the minus button at the bottom of the window.

Similar Messages

  • Classic always loads on OSX startup, how do i stop that?

    when my OSX computer boots up, it always loads Classic too which i do not use much. How do i take that out of the startup and just load it up when i need it?

    To control Classic startup, see this Knowledge Base article from Apple:
    http://docs.info.apple.com/article.html?artnum=106701

  • TS1702 When I tried to update existing Pages app it did not complete loading update and has 'locked' into loading mode. I do not want to trash the existing Pages because it contains documents I need. Any advice?

    My problem is that when attempting to load updateed Pages the app has frozen in 'loading' mode and will not complete the loading. It is now unusable and does not respond to turning off the iPad and restarting. The Pages icon is in 'shadow' and will not respond . Cannot get the red minus symbol. Can get X symbol but do not want to trash it because it contains many documents I do not want to lose.  Suggestions welcome!

    Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is app and data safe!

  • Nano always displaying charge indicator even when not plugged in!

    Following a recent charge, the nano is permantently displaying the charging indicator whether I have it plugged in or not. This means that even when disconnected and switched off, it shows the symbol and runs down the battery - meaning I have to keep it charging all the time when not in use!
    I have had the nano working fine for several months - strange that it's started doing this...
    Anyone else had this problem?

    mine has started to do the same thing. I have reset the nano 3 times. When I turn it off the "charged battery" icon stays on though the light is off. I plugged it in to the computer and had to reset for the computer to find. After leaving it plugged in for a few hours I unplugged and tried again. Still says "charged" all the time.
    I could try a hard reset...., but has any one else experienced this?
    rob

  • WRT45G ver 7 reboot when i want to Access base web utility

    i have router  WRT45G ver 7 it work but when i want  to access in web base utility the router reboot
    info:
    led power is on stable
    led lan is on
    led wlan on  and the access point work
    1.http:\\192.168.1.1
    2.enter user name and password (admin,admin)
    3.hir the page begin to get  after a few second  the router reboot
    Page cannot be displayed completelty
    i try :
    - simple reset
    -(30/30/30) reset and i enter in managment mode firmware upgrade
    i don't try hardware reset 
    thank you for help
    Solved!
    Go to Solution.

    i found it 
    when the  router reboot  don't quit page of management mode and not refreash it  put your firmware and upgrade
    the router after few minutes displyed "susseful" 
    enter 192.168.1.1 and username/password "admin/admin" and the page opened without a router  reboot
    thank you for all

  • How to fix when message "loading" runs without stop when I want to get I-Tunes or AppStore?

    For couple of days, when I want to get I-Tunes or Safari or AppStore on my iPod touch, message saying "loading" non stop. How to get these applications.

    Try resetting the iPod.
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.

  • How prevent iCal ALARM reminders popping up when not wanted?

    Sometimes I don't want to see my alarm box popping up to remind me of things.
    Suddenly, & frequently, the pesky iCal Alarm box pops up in the middle of the screen with another preset alarm reminder, insisting on my immediate attention. Like when I'm watching a video on my mac.
    Then I've got to get up and move it out of the way, but as soon as I touch it, the video which I've set to full screen shrinks to small & I've got to click it to big again. This is just one of the inconveniences.
    Please, how can I set the iCal alarm to give it a rest for a while and save those reminders for later
    I've made lots of iCal alarms to remind me of things throughout the day. so these interruptions are a constant problem.
    Q#2: Why doesn't my ALARM BOX show active the Yellow Button so I could relegate it to the side Dock? Or even the Green Button, so I could enlarge it when I want to see all my open reminders without scrolling?
    Instead, My ical ALARM BOX only has the Red button, which closes it out and loses all those reminders therein until it's their time again.
    Oh, dear, I don't think anybody can solve this problem.
    Or
    can
    you?

    You can look at Adblock Plus: https://addons.mozilla.org/firefox/addon/1865
    You need to subscribe to a ''Filter list'' (e.g. the ''EasyList''): http://adblockplus.org/en/subscriptions
    Adblock Plus forum: https://adblockplus.org/forum/

  • Firefox 15 does not always load my home page when it starts up.

    Started my computer. Clicked on the Firefox icon to start Firefox. My preferences include loading my home page (an html file on my computer) when Firefox starts. I have also set browser.newtab.url to the same thing.
    Some of the time, a blank page shows where my home page should show.
    My home page should have loaded.
    If I click on "new tab", the new tab always seems to load my home page properly. It is only when I first start up Firefox that this problem may occur.
    Since this is an intermittent problem, and there is a work-around (clicking on the "home" icon), this is undoubtedly a low-priority bug.

    Since the time of Sea Monkey and Netscape, this problem has not arisen for me. It did not happen in Firefox 12. Only when I upgraded to Firefox 15 did this problem start happening. To me, a retired computer programmer, this feels like a regression. I'd guess at either an uninitialized vairable or a race condition.
    In any case, Firefox should be able to handle being closed by clicking on the x in the titlebar. I shall continue doing so.
    There has never been a hang at exit for me, so that is not something I will pursue.
    In addition, since the problem did not occur ever until Firefox 15, I have done the following:
    sudo yum downgrade firefox xulrunner
    Both are now at firefox 12 level.
    To keep things at that level, I've added to /etc/yum.conf the following:
    exclude=firefox, xulrunner
    I'm certain that my recent actions to downgrade will solve the problem and show that this is a regression.

  • How to change the project which is always loaded at startup?

    Hi all,
    when Logic Express (7.1) starts, it always automatically opens an "Untitled.Iso Arrange" window. The first thing I have to do is to close this and open my own arrangement which I have configured as some sort of starting point for me. Is there any way to tell Logic that it should open this file instead of its generic one when Logic starts? I know that I could start it by double-clicking my "start project" in the Finder, but that's not what I'm looking for...
    Thanks
    Björn

    Autoload Song
    Logic allows you to define one template that is automatically loaded each time Logic is booted. This template is called the Autoload Song.
    To create your personal Autoload Song:
    1 Customize a song to meet your requirements (more on this is discussed in the following chapters).
    2 Choose File > Save As Template in Logic’s main menu bar.
    3 Ensure that the Song Templates folder is selected in the dialog box that launches.
    4 Type “Autoload” into the Name field.
    Your Autoload Song will be opened automatically the next time you launch Logic.
    Logic allows you to create and save any song as a template file, which can be used as a basis for new projects. The Autoload Song is an example of a template file, but you may wish to create several templates for; scoring tasks, audio only projects, MIDI only projects and so on, as your personal needs require.

  • Welcome to Firefox Page always loading at startup.

    Every time I start firefox, the Welcome to Firefox webpage loads up, regardless of if I go in and reset my homepage or if I make it startup as with a blank page. This only started happening after I updated to version 13.0
    I tried many of the available trouble shooting guides from Mozilla as well as users replying to people with the same problem and none of them work for me.
    I also started Firefox in safe mode and opted the Reset all Preferences option and restarted and this also did not fix the problem.
    Does anyone know what could be causing this, and how to fix it?

    See these articles for some suggestions:
    *https://support.mozilla.org/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
    *https://support.mozilla.org/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols
    *http://kb.mozillazine.org/Preferences_not_saved

  • MBP 6,2 late 2010, OSX 10.6.6, Ethernet not detecting cable after waking from sleep. Must restart MBP to get ethernet detect cable. Any ideas? (apart from rebooting when not working).

    Will be installing 10.6.7 soon, will let you know if it fixes it.

    OK, 10.6.7 update did NOT fix the issue.
    So before putting mbp to sleep last night, I did a SMC reset procedure.
    This morning when it woke up, it detected the cable immediately.
    Thanks leroydouglas.

  • Get wine to load Diablo II even when NOT root

    Hi guys (and maybe there are some nice girls, too )
    I installed wine from the repos and my Diablo 2 + LOD Expansion and everything was fine.
    But then i wanted to start the game and got an "Please insert the Expansion-Disc".
    After some doublechecking of winecfg and so on I just tried to start the game as root AND it worked...
    I think it might be a problem of groups/rights or might it be something else?
    Here my /etc/group: http://pastebin.archlinux.org/18127
    greetings
    huygens

    Now I managed it to get both games running fine.
    But as soon as I was able to start, the next Problem appeared:
    There is no inet-connection available in wine. My linux-connection is alright.
    I have no proxy (except of tor and privoxy) and its seems to be wine not connecting correctly.
    Even starting as root does NOT solve this Problem... *baaad*
    To tell you the solution of my former problem:
    There were some mistakes in the syntax of my /etc/group and so my user had not the required permissions (e.g. reading the cd...).
    A simple correction made it work!

  • How do I stop iPhoto opening when not wanted?

    I don't use iPad - I prefer Lightroom.  So when my iMac was updated to Yosemite iPhoto started opening every time I plug a compact flash card into the iMac.  This is annoying to say the least as each time I have to close it making sure it doesn't start importing images into the wrong place.
    How do I "turn off" this feature?  No is no help in the iPhoto "help" and online Apple isn't any better.

    Changing this in iPhoto alone may not suffice. Then change the setting in Image Capture as well.
    Insert your Compact Card reader with the card inserted.
    Then launch Image Capture.
    Under "Devices" select your card reader. Then click the disclosure triangle in the lower left corner to reveal the ""Connecting this ... opens" and set this to Light Room or "No Application".
    You will have to do this for each photo device (camera, iPhone, iPad, ...) you own.

  • Auto Fill when not wanted

    Trying to fill out an application and when I enter info it auto fills on the like field afterwards.  Example:  My home address is not the same as my work address.  When I try to change the work address it changes my home address.  I don't want that to happen.

    ~graffiti said: "There's not much you can do about it with Reader."
    Actually, there's NOTHING you can do about it with Reader.
    As was stated, when a form is created with Acrobat or LiveCycle, fields can be "repeating" like initials in a contract, where needed. That way, once the end user enters the initials once, the rest of the fields (which all have the same name) will populate with the same info.
    Whoever authored that form did this with the "Address" field. Since both work address and home address have the same name, Adobe Reader is designed to populate them with the same info. Reader cannot undo this setting.

  • Sony A7 memory recall when not wanted?

    Hello community member! It's my first post here   'm having a rather odd issue with my A7 purchased not so long ago. The memory recall screen will appear from time to time for no apparent reason, even I have my mode dial on S or A. Some time it even happens when I simply holding the camera without touching any button, however it seems the issue most often triggered by pressing C2 button which I assigned to magnifying focus. this is rather annoying as I would be in middle of a shot then all in a sudden memory recall happens and changed to a completely different setting. Many times I spend time to adjust back to the setting I wanted, only to have another unintended memory recall and have to start over - a recipe to miss the shot.... I have updated to latest firmware v2.0, and have tried to factory reset a few times, issue remains. Any suggestion? At this point I don't even care about the memory function, if there is a way to disable the memory I'd be happy... kind regards and thanks in advance.

    Hi OddDodo,
    Welcome to the Sony Community!
    Good day and thank you for the comment. There is no way to disable Memory Recall but you can restore the settings back to default if you wish to. MENU → (Setup) → [Setting Reset] → Initialize. After initializing, the settings in the Memory Recall should be removed. Also PlayMemories Camera apps will also be uninstalled but you can download them again.
    For further assistance, We kindly recommend visiting our Sony Global Web site for information on contacting the Sony Support Center in your region at http://www.sony.net/SonyInfo/Support/.
    If my post answers your question, please mark it as "Accept as Solution".
    Thanks again and have a wonderful day.
    Zander

Maybe you are looking for