Classic and Network

Hi everyone!
Gobble Gobble to ya!
We are using Panther (10.3.9) on our G5's with Classic and have seem to come across a weird problem that I was wondering if some one has seen.
When we mount an afp network volume via the "Connect to" window, and try to open a file (File menu + Open), from a classic app like Quark 4 for instance, we cannot see any of the data within the volume from the "file + open" window. But if we open an OS X app the same way, we can. I tried a variety of different Classic apps and they all exhibit the same problem.
I even tried mounting the volume from the "Chooser" (which I didn't even know was still possible!) and we still couldn't see the data on the network volume.
Has anyone ever seen this?
Thanks and Happy Thanksgiving!
MM

No longer relevant

Similar Messages

Classic and Network Communications

Have an issue where a Classic app requires access to a database stored on a network volume...on launch, it prompts for the password to mount the volume, the volume mounts, but the app in Classic then refuses to see it and prompts user to mount volume again (endlessly)...the volume does show up on the desktop, but can only be seen by the Tiger 'side' and not seen by tghe app in Classic...assuming it is how Classic now communicates with OS X...this issue does not occur pre-OS 10.3.8...anyone know what has changed to cause this or any workarounds to allow Classic to commune fully with Tiger?

No longer relevant

Lion, Externals and networking.

Hey there,
I'm a first time Mac User and I recently bought a MacMini. I thought buying the low-end MacMini would be a great expense to add to my collection of electronics.
I'm not overly familiar with the Lion OSX. I've currently setup a network and can access files on all computers back and fourth (This took quite some time to figure out). The biggest issue I am currently having is related to why I got the MacMini.
I bought the MacMini to use as sort of a media server. From what I've read about the features it appears to work great for one. So far what I have gotten out of it does work very well. This server would have (and does have) a lot of Windows based computers connecting to it. There is no issue with the communication between the two. The problem is; My Mac doesn't appear to be able to share external hard-drives over the network. I do the standard procedures of adding the users and their permissions. I proceed to attempt to access the files on my Windows based computers (Or iPod, etc..) to no avail. What I am finding when I go back to check the permissions is shockingly, they have been removed. Why is this? Is this perhaps a 'bug', or merely an intentional incapability?
If I may be advised of a procedure to fix this or informed as to why I am unable to use this feature I would be much obliged. As the low-end MacMini only has about 500gigs of storage it is not sufficient to replace for larger storage. I have storage readily available and would like to make this accessible through the network.
Thanks for reading,
Sincerly your new (Hopefully permanent) Apple Customer.

Having done a little more research it looks like it's probably not worth getting involved with sharing my iPhoto library, particularly as my iMac runs iPhoto '08 and the MBA will be running iPhoto 'll
Having read reviews about iPhoto 11, I think I will stick with 08. Thought about 09 but I can live without faces and places (I know this is a different discussion!)
As for music, perhaps I will just copy for example 5Gb of music over to the MBA, for occassional use (plus can always listen to internet radio etc). For e.g. air travel I will always have my iPod classic, and failing that there is music on my iPhone!)
Perhaps KISS is the best philosophy here [keep it simple, stupid!].
Also worked out
- won't be doing Airdop (iMac not running Lion)
- will be doing shared folders for transferring files.
what I don't understand is do the MBA and iMac use the wireless broadband routers WIFI network, or do I need to set up another WIFI network for the MBA and iMac to communicate over?
Thanks,

Need help with Classic and OS 9.

I have searched on this issue and while I found a lot of posts I am still unsure what to do.
I just purchased some software that says it can be used on OS 8, 9 or X.
I have a G5 iMac running 10.4.3 and my wife has a G4 iBook running 10.3.9. Neither of us have ever used anything that has needed Classic before.
When we try to install the software we get a message that says:
"Classic cannot find a Mac OS 9 system folder on the startup disk to use."
I am confued that I get this message since the software package says OS X.
I assume this means that I need to install classic on our machines. Since she has Panther I believe there is Classic on her start-up disks but I have no idea how to use them or where to start. Some of the things I read says that I need to uninstall Panther or Tiger to install Classic.
For me (using Tiger) I don't think I have Classic on my disks. Can I use her disks to load Classic on my machine? Also, in looking at some Apple documents I found something called Software Restore.dmg that I downloaded to my machine but again, I don't know what to do with it. Does this contain Classic?
I have an external drive attached to my network via Ethernet and mounted on our desktops. I can't boot from it but can I load Classic onto that drive and just run it like an application?
Does classic take up a lot of space on the hard drive?
As you may have guessed, I am not that familiar with how to handle this and would appreciate any and all direction. If I have left out any critical information please let me know and I will post additional info. as needed.
Thanks.
David

Joe:
Thanks for the prompt reply. In looking at my install Disc 2 I found that I could install the OS 9 package and I got the software to run. Thanks.
As it turns out, all the software that I purchased did was install a bunch of Word and Excel templates onto my computer via Classic. I don't actually need the application any longer to use these templates going forward so my next question is;
How do I uninstall OS9 from my computer?
It appears I have several new folders in my Mac HD in Finder. They are:
Application (Mac OS9)
Desktop Folder (this is empty)
System Folder (the contents are about Classic and Classic Support etc.)
Would I just drag them to the trash to uninstall OS9? Are there any preference files I should delete?
Or am I best to just leave this in my system for possible future use? Having recently converted from Windows I am still of the mindset that I need to get off anything I don't really need or use.
Thanks again,
David

I recently connected my new ipad to my itunes, but now itunes will not recognise my ipod classic, and 50gig of music has gone. ipad connects ok but no longer ipod which has been there for two years! help!!!

I recently connected my new ipad to my itunes, but now itunes will not recognise my ipod classic, and 50gig of music has gone. ipad connects ok but no longer ipod which has been there for two years! help!!!

What happens when the iPod is plugged in? anything? any errors?
Why is 50GB of music gone? All music should exist on the computer. Only a fool would rely on a single device which could easily be lost or stolen to store their content on.

Wireless and network printing transcript for Meet the Experts

On March 16th, HP hosted its first online chat event on wireless and network printing. Below is a transcript of that session.
I am in the process of planning the next chat event. I would love to hear what topics would interest you, what day of the week and time is best for you, and if you think an hour is too long.
So, if you get a minute, please let me know.
Here's the transcript:
SiobhanF-HP: Welcome! Cameron, Craig, David, and Jim are ready to tackle your questions.
SiobhanF-HP: Just to remind you if you want to ask a question, you must be a member of the HP Support Forums. If you want to join, go here https://passport2.hp.com/hppcf/createuser.do
nc256: Do I need a wireless router to hook up my wireless printer?
CameronL-HP: No, but most people will want to do it this way. You can use a feature called an ad hoc connection to avoid using a router, but it is only covered under an older standard that is slower and less secure. Also, without something to route traffic between the local network and the internet, you cannot get an internet connection. Using a wireless router makes setting up a wireless network easier, and it will generally make the network work better too.
jest1: I've seen some hardware in stores for a "print server" hardware device that attaches to a network. Is this something that I need in order to run a printer over a network?
CraigB--HP: Not if you have a printer that has a network connection built in. Many models of HP computers are ready to be connected directly to your wired or wireless network.
katiepage: How can I print when I am using a VPN?
DavidH-HP: VPN connections generally hide the rest of your home network to increase the security of the VPN connection. A printer on the network isn’t a security threat but the VPN doesn’t know that. It just hides everything just to be sure. That means that when a VPN is active you need some way to connect to the printer other than your home network. Bluetooth, USB, and even printing to a thumb drive and plugging that into the printer are all ways of getting your print job to the printer that don’t go through your home network.
SiobhanF-HP: If you have specific product questions, the more information you give us the better we will be able to help you. Getting your exact model number; any error messages; a description of your wireless network including what kind of security you have, what wireless-devices are connected to your network, and your IP address will go a long way to helping us answer your question.
MelissaP: Why would I want a wireless printer?
CraigB--HP: The main advantage of a wireless printer is the ability to place the printer somewhere in your home or office even if this is not near your router or computer.
Deltan: What is the maximum distance I can have between my router and my printer?
CameronL-HP: It does depend on your environment. Without interference about 25 feet. Walls and floors and other objects can reduce this. The types of walls are important. For example, mirrors and outdoor walls will greatly reduce the indoor range.
jest1: Is there a preferred wireless router type or brand for wireless printing compatibility? We are using a Linksys 802.11g router in my home.
JimB-HP: In general, any wireless-router from a name brand manufacturer that has been Wi-Fi certified is compatible with our printers (look for the Wi-Fi logo). We use Linksys in our lab with great success.
nc256: Are there any digital cameras that can send directly to an HP wireless printer for photo printing?
DavidH-HP: Many printers support a feature called Pictbridge. If the camera and printer both supports this feature, the camera can be plugged directly into the printer to print photos. Or are you asking about printing over a network connection?
KevinW: I keep hearing that you shouldn’t use default settings for a network. Why?
CraigB--HP: There are three reasons not use default settings: First, wireless-routers do not have any wireless security enabled by default. Second, you will be using a common network name in which case you may connect accidentally to your neighbor’s network. Third, your wireless-router is accessible by inadvertent guests who may change the configuration of your wireless-router without your knowledge or use your internet connection without your permission.
Bodie08: I have an HP Lan attached printer and Windows XP on my home network. Is there a known setting (Firewall/port/other) or patch to address the issue of hpqtra08.exe hanging on Windows XP Shutdown? A number of us in the forum have identified this issue. Thanks!
DavidH-HP: This problem has been seen in the past but there were attempts to address it. Have you checked to see if there is a later release of software available on the web? (hp.com)
ZhuLee3: How old is wireless printing technology? I noticed all the experts have around 20 years of experience with it, was there wireless 20 years ago?
JimB-HP: Wireless printing first appeared with the introduction of the 802.11 standard in late 1990's. HP has been making wireless printers since 2003.
lpeterson123: What makes wireless so flaky at times?
CameronL-HP: There are lots of reasons. Wireless signals are affected by distance, walls, metal objects, and other wireless devices like cordless phones. However, most of the problems seem to be from how the network or how security software is configured, and these can also cause things to fail only occasionally or in certain situations. Having a good wireless connection between a PC and printer involves several hardware devices and lots of software made by different companies that all have to work together; if something is not quite right in any of these things then the whole solution looks flaky.
Bowman16: I use a Mac, are there any features that would not work if I was to set it up for wireless use
DavidH-HP: All the features will work on a Mac if you install the full HP software solution.
jest1: Thanks for the answer on the router question. The next question, then, is to ask what would be a recommended consumer-grade wireless-enabled printer (or series) just so I can start my research.
JimB-HP: Any of our Photosmart or Officejet wireless printers will work with Wi-Fi certified wireless-routers. Our price points really have more to do with how much printing you do. In general, our more expensive printers cost less per page than our less expensive models.
Bodie08: Why would I choose "spooling" on my PC over "direct connect”?
CraigB--HP: In general, spooling allows you to use your program sooner than printing directly.
ZhuLee3: Jim: What is it like to be an "HP Printing Expert"? What kind of stuff do you get to work on, on a day to day basis?
JimB-HP: I really like my job -- I've always been a radio enthusiast so working on 802.11 technology is really a dream job for me. I'm also fortunate to work with a great team here in Vancouver, WA. More importantly, I like designing equipment that people use in their everyday lives.
TEACHER1: Recently I changed routers, now I am unable to print wirelessly, even though the SES and wireless network light are steady on my Deskjet 6980 printer. What is the solution? Thanks.
DavidH-HP: The wireless light indicates that the radio is on but does not indicate that the printer is connected to the network. First check that the printer is connected to the network by printing a network configuration page from the printer.
AgentRed: I get my internet with a Verizon wireless broadband card. Someone told me that wouldn't work with a wireless printer. Is that true?
CameronL-HP: Our wireless printers use the 802.11 b, g or n standard which is not compatible with the wireless cellular standard. It would be like trying to connect to a wireless network using Bluetooth. They are different wireless technologies.
DavidH-HP: Regarding the Verizon card, it is true that you cannot connect the printer over the Verizon connection, but as long as your laptop has Wife you can print to the printer over WiFi at the same time that the Verizon connection is active. This should not be a problem.
jest1: Is there a "minimum" internet connection that is recommended for wireless printing? We live a bit far from the DSL CO so our connection is sometimes flaky. I would guess that incoming speed shouldn't affect my local wireless LAN but I want to ask it anyway
CameronL-HP: There are 2 parts to your home network. 1 is your wireless router which manages your local network equipment, then your network connection to the world wide web which your DSL provider gives you. The connection speed of your local network is not affected by your internet connection speed.
Bowman16: Are any HP printers 802.11n? I do not want to add an 802.11b,g to my network and cause it to slow down.
JimB-HP: Currently, our printers comply with the 802.11g standard. We are investigation the emerging 802.11n standard.
ZhuLee3: Will there be a transcript of all the questions and answers from this chat available for viewing after the session? I think I missed some questions at the start.
SiobhanF-HP: The chat event begins when you joined. Sorry that you can't see what was said before you joined. I hope to have transcript posted tomorrow or on Wednesday at the latest.
nc256: Where is the future of printers headed? Does HP have any interesting plans with printing technology? And what’s your opinion on whether or not color laser printing will ever approachthe photo realism of ink jet color?
JimB-HP: The future of HP printing will be characterized by wireless connectivity to not only computers but to mobile internet devices. In fact, as mobile devices become smaller (think phone or netbooks), the need to print from your mobile device might become more relevant.
jest1: Am I able to print from my iphone to a wireless printer?
CraigB--HP: You can print photos from your iPhone to HP wireless printers and it works great in my experience. Go to http://www.hp.com/go/iprintphoto to get the details.
TEACHER1: Thank you. I printed a page. It shows that wireless is disconnected.
DavidH-HP: Then you just need to input the wireless settings from your new router into the printer. If your printer does not let you input the settings from the front panel, you can use the CD that came with the printer or downloaded from hp.com to configure the printer again ( look for the option to "add a device" ).
ZhuLee3: Question about security... if I get a wireless printer, what’s to prevent other people within range of my printer, from adding it and printing documents? How is this configured on the actual printer?
JimB-HP: The simplest way to secure your printer is to enable WPA-PSK security for your wireless network and to use a security pass-phrase that is at least 12 characters long. This configuration is very safe from intruders for the foreseeable future.
CameronL-HP: It' is also a good idea to use a unique network name, also called an SSID.
carolj: I have a photosmart C7180 and I have it hooked up to my laptop (windows vista) when the setup completed the printer was put in networking instead of printers and I cannot access it or move it out of there. What do you suggest?
CraigB--HP: You might need to uninstall and reinstall. Before doing this, make sure your get the latest driver from the HP support at: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=1153754&lc=en&cc=us&dlc=en&lang=en&cc=us This is also where you can get a copy of the instruction book.
wizll: Hi, I haven't done much research in wireless printing, but I'm interested as I currently have my printer set up the old fashioned way where it's connected to a networked PC, but if the PC is off I can no longer print, which is obviously inconvenient. Do hp wireless printers have a web gui you can connect to once it's on the home network, or is it simply all done from the printer's interface. I've seen some old wired network printers that only use the printer's ui and that seems like a clunky use.
DavidH-HP: Yes, the HP printers which have networking built-in have what we call an "embedded" web server which allow you to configure settings, check status, and have many other features; on some models you can even scan using the embedded web server.
nc256: Jim: Will color laser printing ever reach ink jet quality for photos?
JimB-HP: While never is a long time, inkjet printers will, for the near future, output higher quality photos.
katiepage: If I'm at home, connected to my office network via VPN, can I access my office networked printers?
CraigB--HP: Yes, when you are connected to the office VPN, you can print to your office printers. However, you will not be able to print to your home networked printers while you are connected to the VPN.
jest1: If a friend comes over to my house with their laptop and needs to print something, are they able to do this just by authenticating with my wireless LAN (assuming I have a wireless printer set up)?
CraigB--HP: In addition to authenticating to your network, you friend will also need to install the printer driver for your printer.
jpszambelan: Is there a wireless USB device of some kind I can connect to my printer if there is no network connection already built in?
JimB-HP: HP sells an accessory that adds Wi-Fi capability to your USB printer (see http://www.shopping.hp.com/product/printer/inkjet/wireless/4/accessories/Q6236A%2523A2L) Also, many higher-end wireless-routers allows USB printers to be connected to them to allow sharing of the printer from the network. Note that this solution often limits you to just printing and not scanning from the network.
rockwoodchev: It seems that my computer can find my printer, but my printer can't find the computer, so that "Scan to computer" won't work. What do I need to do in order to fix that?
DavidH-HP: This can be blocked by security software running on the PC (such as a personal firewall). Make sure that your firewall is configured to allow communication on your local network. You can also unblock specific ports, but the easiest way is often just to allow communication on the local home network. The specific setting varies from firewall to firewall.
SiobhanF-HP: We are nearing the end of our chat session. We only have time for 3 more questions. If we did not get to your question, please post it on the Networking and Wireless board in the Printers and All-in-Ones forum. http://h30434.www3.hp.com/psg/board?board.id=Networking
SSPatrick: Is it possible to print wirelessly to the same HP printer using both a PC and a Mac?
JimB-HP: Yes -- I do this in my home. I have both Macs and PCs on my network without any trouble.
Bowman16: Any plans to do this again?
SiobhanF-HP: Yes we are.
ZhuLee3: Do all of the experts hang out on the HP community? Will we see you posting there after this?
DavidH-HP: Oh yes, whenever time permits. In addition to trying to help people, I learn things too.
JimB-HP: I'm known as Wi-Fi-Guy on the support forums. I hang out there often helping where I can. It helps me be a better designer.
CraigB--HP: I monitor the forums looking for problems to take back to the development lab for investigation. To date, I have only posted one reply.
CameronL-HP: I haven't been involved in the past but expect to be more involved in the future.
SiobhanF-HP: We only have time for one more question. If we did not get to your question, please post it on the Networking and Wireless board in the Printers and All-in-Ones forum. http://h30434.www3.hp.com/psg/board?board.id=Networking
ZhuLee3: Thanks for setting this up!
SiobhanF-HP: The transcript will be posted on http://h30434.www3.hp.com/psg/board?board.id=Networking
TEACHER1: Thank you all for conducting this session !!!!
jest1: Is there an OS limitation to print wirelessly?
JimB-HP: All the OS versions supported by the printer as supported wirelessly. In general, we are compatible with Macs, Windows and Linux.
SiobhanF-HP: We are ending the chat event. Thank you for coming. We hope you found it worthwhile. I will be posting a transcript of the event in the Networking and Wireless board in the Printers and All-in-Ones forum. We will be hosting future Meet the Experts chat sessions on a variety of topics, so please tell us what you thought of the event and how it could be improved. http://h30434.www3.hp.com/psg/board/message?board.id=Feedback&thread.id=525
Live Forum Closed
Message Edited by timhsu on 03-18-2009 05:39 PM
Message Edited by timhsu on 03-18-2009 05:43 PM
I work for HP, supporting the HP Experts who volunteer their time and technical knowledge to help others.

I expected this to be released quite earlier. But now that it's in process, I'll wait patiently.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

IPhone 4 and network extender troubles

I live in an area where I need a network extender to receive a signal. All has worked perfectly fine in the last 4 years I've been with Verizon, until about 4 weeks ago when my daughter was trying to send me pictures that I never received. I then noticed a picture I had sent her didn't go through either. I'm usually connected to wifi, but when I'm not and try to access the internet it says "could not activate cellular date network".   I have tried every suggestion I could find on the internet from other people who have had this issue with no luck, and I do mean everything from toggling off and on this and that, to taking my phone back to factory settings, which by the way, even with no back up and just adding one picture and one contact this issue exists. When I'm in a 3G area I have cellular data and the phone works fine, including being able to send and receive pictures and being able to access the internet, so I have no reason to believe it's the phone or the settings. I'm thinking it has something to do with the network extender not playing nice with my iPhone because my husbands Android is able to send and receive pictures and access the internet with no problems.   I would also like to note that about 2 weeks ago I contacted support to see if they had any news, the tech tried sending me a picture which I did just randomly receive about 2-3 hours later, along with a picture my daughter had sent me earlier in the day. I asked her to send me another one which I got, but after that I tried sending her a picture and the problem was back.
I have been in contact with technical support and network support, who haven't really helped me. I don't think they know what the problem is so they just ignore me, as it's been 8 days since I've heard from them. I think 4 weeks is plenty of time to at least narrow it down. On my first ticket they asked me to run a speed test, which I did and they were going to check the towers. They called me on my cell, but I missed the call, thanks for leaving that VM though, no cellular data=no VM, so I didn't know until days later you left a message saying no problems were found. So I had to start over again, two weeks since the problem started.   On my second ticket they said they didn't do the first ticket right, a week later they called back asking for another speed test, which came back above minimum requirements, they were going to pass it on to network support and here I wait 8 days later, 4 weeks total with no end in sight.
Today I stopped at the Verizon store hoping they'd have some suggestions. They said they couldn't do anything on their end, I'd have to call technical support...The only thing they told me that was new was something about a security breach with Samsung extenders, and maybe an update was pushed to my extender that's not playing nice with iPhone. But how do I check on something like that, who do I report this to??   If that was the case wouldn't Verizon tech support know about it? I'm not getting any help and I don't feel like anyone at Verizon really cares, but you can bet if my payment was 4 weeks late there'd be an issue.
Any suggestions?

How old is the extender? Can it support 1x or both 1x and 3G? Try checking the Network Extender space for more suggestions and similar questions.

Question regarding Classic and Advance table

Hi,
I have classic and advance table. I am populating with VO that brings 100 record. When i render page i see last record being displayed. How can i show my first record by defult on both tables?

By default the first record will be displayed, if you are seeing the last one instead, you probably did a vo.last() in the code.
Thanks
Tapash

TS3694 good evening i have an problem with my iphone 4 the wif and network cant on now if i tray is showing iTunes i tray to reload the ios is showing an error -1 can you help me

good evening i have an problem with my iphone 4 the wif and network cant on now if i tray is showing iTunes i tray to reload the ios is showing an error -1 can you help me

No problem, glad to help!
Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine.

Hi, I bought 2 songs off itunes. I have synced my classic and shuffle with no problems. The new songs show ok in my libary but when i view my iphone 5 in itunes these songs appear greyed out with a ring of dots to the left and will not sync to my iphone?

Hi, some of my songs appear greyed out with a ring of dots to the left in itunes when I view whats on my iphone 5. These songs will not sync to my phone but have synced to my classic and shuffle? Can anybody tell me why this is? Cheers

See this older thread for a few possible solutions.
https://discussions.apple.com/thread/3924425?tstart=30
B-rock

How to find SSID and Network Key to setup wireless printer to iMac?

It is easy to find your "SSID" and "Network Key" once you understand what you are looking for. Here is what worked for me when I setup a new wirless printer today:
1) SSID = Your Network Name
Ex. Jason's Wi-Fi Network
Ex. Harry's Lounge
First way to find: on an iMac, go to the top bar on the right side and click on the "wireless symbol". You will see a list of all the wireless networks your computer is picking up. The one you are connected to (if you are able to surf the Internet) is the name you enter when asked for the SSID.
NOVICE HINT: This is the equivalent to walking into a Starbucks and logging onto their wi-fi via their "network name," which has the word Starbucks in it. Some network names will have have locks next to them, meaning they are "secured by a password" and some will not, meaning anyone can access this "free" wi-fi. This doesn't matter either way, it just helps with making sure you have located the list. Of course, it is also possible, if you live in a remote area, that only your network name will show up.
Second way to find: on an iMac, go to the apple symbol in the upper left corner of computer and make sure it says "finder" (if it doesn't, just click on your desktop and it will show up), then select:
go > applications > utilities > Airport Utility > double-click on the image of the AirPort Extreme and the network name will be listed
2) Network Key = Password used to access your Wi-Fi Network
Ex. BMXGuy456!
Ex. Millionare$!!!
This is the password you created when you setup your wireless network, meaning it may not (and should not be for better security purposes) the same password as you use for your Apple ID, email etc.
NOVICE HINT: So if for example a friend came to stay with you and wanted to connect to your "secured wifi" meaning there is a lock next to it, you would give them this password.
EXTRA INFO:
Why do I need this info anyway?
Because just like anyone who wants to use your wifi when they come over, the printer needs to understand what to connect to, therefore it basically needs the network name to know "WHAT" to connect to, and the "PASSWORD" in order to access that network.

After much stumbling around, I also discovered this answer. I picked up the 2270DW used, without disc or manual, so downloaded what I needed from the Brother site, but the Brother Mac OSX instructions feel as if they're written by a non-Mac user. I am on OSX 10.7.5, using an Airport wireless unit in Bridging mode (because I have to use a provider's router at the front end of my setup). But once I picked my Airport network name through the Brother Wireless Setup Utility and then typed my network name in the SSID box and my network password in the Network Key box ("es" --- I think the "network key - i.e. password" had to be confirmed a second time) after waiting for the utility to process the information, it worked like a charm.

Open and Network-EAP authentication - difference in security?

As far as security goes, and assuming Radius authentication wil actually authenticate and allow users access to the wireless network (or not), it there any difference (once again, as far as security goes), between Open Authentication and Network-EAP as described below?
In any EAP/802.1x-based authentication method, you may question what the differences are between Network-EAP and Open authentication with EAP. These items refer to values in the Authentication Algorithm field in the headers of management and association packets. Most manufacturers of wireless clients set this field at the value 0 (Open authentication), and then signal their desire to do EAP authentication later in the association process. Cisco sets the value differently, from the start of association with the Network EAP flag.

1. Join process - comparable to connecting a cable in the wired network world. Usually "OPEN".2. Authentication - this verifies the client is who they claim they are because they possess a certificate (EAP-TLS), know the password or a PSK.3. Encryption with TKIP or AES - this is about protecting data as it is transmitted through the air AFTER authentication.
You are correct.
What confuses me when attempting to configure the Aironet I'm working with is the difference in terminology with the familiar choices I had in Linksys access points, something like this:- WEP- WPA- WPA-Enterprise- WPA2- WPA2-EnterpriseI thought WPA-Enterprise has to do with Radius and indeed I was able to create a test network in which a Windows XP laptop could connect via a Linksys access point, authenticating with EAP-TLS, with WPA-Enterprise selected on the AP. The Windows 2008 server was both a certificate authority, a radius (NPS) server and a domain controller.With the Aironet, I'm not sure what the equivalent choices should be, because, if you look at the link in my last post, there is a larger selection: WEP 40 bit, WEP 128 bit, TKIP, AES, combinations of what precedes and no reference to WPA or WPA2. I'm guessing TKIP = WPA and AES = WPA2.And while I can select "EAP" in the Express Security Setup tab, I cannot see where I would opt for EAP-TLS rather than PEAP or EAP-TTLS and so forth.I'm going to take a look at your blog now and see if that doesn't enlighten me further.
You are on track my friend keep the thinking going .... you are very close!
Some more foundation for you ...
WPA - Is PSK with TKIP
WPA2 - Is PSK with AES
WPA Enterprsie - EAP- ??? with TKIP
WAP2 Enterprsie - EAP - ??? with AES
??? = Your selected EAP type
Now, why dont you have to configure EAP type on the AP? Great question, lets break this down.
1. The AP or WLC for that matter doesnt care what EAP type you use . Why you ask?
When you configure 802.1X, there are 2 virtual ports . These are virtual and you do nothing to configure these. Once you connect to an AP and EAP starts, the ap BLOCKS ALL TRAFFIC except for EAPOL traffic. This is the ONLY traffic allowed past the until the AP / WLC receives a RADIUS SUCCESS. Once the AP/WLC sees this radius success it then switches virtually over to the controlled port and allows ALL your traffic to pass.
2. With that being said, your client is only passing traffic through the ap and wlc. The ap / wlc doesnt care what EAP you are using. Your client is talking directly to the radius server at that point. The AP/WLC at this point is only a pass through, nothing more.
Does that help ?
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin

Kernel Panic while transfering data between MAC HD and network drives

Kernel Panic while transfering data between MAC HD and network drives. it's an iMAC 24" 2011. Snow Leopard 10.6.8. I can't seem to find the cause to this.Thank you guys !
Here is the log fine with error code:
Error code: 0x0000000000000000
Interval Since Last Panic Report: 5 sec
Panics Since Last Report:          1
Anonymous UUID:                    3C5AA43F-D876-4F9D-A831-D8043218C6E0
Tue Aug 16 14:54:46 2011
panic(cpu 0 caller 0xffffff80002d1208): Kernel trap at 0xffffff7f815c6b54, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000005, CR3: 0x0000000000100000, CR4: 0x0000000000040660
RAX: 0x0000000000000000, RBX: 0xffffff8000000000, RCX: 0x0000000001000000, RDX: 0xffffff8013ae9200
RSP: 0xffffff80de173ea0, RBP: 0xffffff80de173ed0, RSI: 0x0000000000000000, RDI: 0xffffff8013ae9200
R8: 0x0000000000000001, R9: 0x0000000000000000, R10: 0x0000000000000000, R11: 0x0000000000000000
R12: 0x0000000000000000, R13: 0xffffff8016207008, R14: 0xffffff8015a228f8, R15: 0x0000000000000000
RFL: 0x0000000000010246, RIP: 0xffffff7f815c6b54, CS: 0x0000000000000008, SS: 0x0000000000000010
Error code: 0x0000000000000000
Backtrace (CPU 0), Frame : Return Address
0xffffff80de173b40 : 0xffffff8000204d15
0xffffff80de173c40 : 0xffffff80002d1208
0xffffff80de173d90 : 0xffffff80002e3f4a
0xffffff80de173da0 : 0xffffff7f815c6b54
0xffffff80de173ed0 : 0xffffff80002524fe
0xffffff80de173f00 : 0xffffff8000478c7f
0xffffff80de173f40 : 0xffffff7f8159b158
0xffffff80de173fa0 : 0xffffff80002c8527
      Kernel Extensions in backtrace (with dependencies):
         com.thursby.kext.cifs(5.1)@0xffffff7f815ae000->0xffffff7f815cffff
            dependency: com.thursby.kext.NetBIOS(5.1)@0xffffff7f8158b000
         com.thursby.kext.NetBIOS(5.1)@0xffffff7f8158b000->0xffffff7f815adfff
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10K549
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:32:41 PDT 2011; root:xnu-1504.15.3~1/RELEASE_X86_64
System model name: iMac12,1 (Mac-942B5BF58194151B)
System uptime in nanoseconds: 105374280984
unloaded kexts:
(none)
loaded kexts:
com.vmware.kext.vmnet            3.1.3
com.vmware.kext.vmioplug       3.1.3
com.vmware.kext.vmci                3.1.3
com.trendmicro.kext.KERedirect              1.0.0
com.trendmicro.kext.filehook   1.5.0
com.vmware.kext.vmx86            3.1.3
com.thursby.kext.cifs    5.1
com.thursby.kext.NetBIOS         5.1
com.apple.filesystems.smbfs     1.6.7 - last loaded 60402747883
com.apple.filesystems.autofs    2.1.0
com.apple.driver.AppleTyMCEDriver      1.0.2d2
com.apple.driver.AppleHWSensor           1.9.3d0
com.apple.driver.AudioAUUC    1.57
com.apple.driver.AppleUpstreamUserClient      3.5.7
com.apple.driver.AppleMikeyHIDDriver                1.2.0
com.apple.driver.AppleMCCSControl     1.0.20
com.apple.driver.AppleIntelPenrynProfile           17
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AppleMikeyDriver       2.0.5f14
com.apple.kext.ATIFramebuffer              6.3.6
com.apple.driver.AppleBluetoothMultitouch     54.3
com.apple.driver.AppleIntelHDGraphics               6.3.6
com.apple.driver.AppleIntelNehalemProfile       11
com.apple.driver.AudioIPCDriver             1.1.6
com.apple.driver.AppleHDA       2.0.5f14
com.apple.driver.AppleGraphicsControl               2.10.6
com.apple.ATIRadeonX3000       6.3.6
com.apple.iokit.AppleBCM5701Ethernet              3.0.5b8
com.apple.driver.AppleIntelMeromProfile          19
com.apple.driver.AirPort.Atheros9388   426.35.3
com.apple.driver.ACPI_SMC_PlatformPlugin      4.7.0a1
com.apple.driver.AppleLPC         1.5.1
com.apple.driver.AppleBacklight              170.0.46
com.apple.kext.AppleSMCLMU                1.5.2d10
com.apple.driver.AppleIntelSNBGraphicsFB        6.3.6
com.apple.driver.AppleUSBCardReader                2.6.1
com.apple.driver.AppleIRController        303.8
com.apple.iokit.SCSITaskUserClient        2.6.8
com.apple.iokit.IOAHCIBlockStorage      1.6.4
com.apple.driver.AppleUSBHub               4.2.4
com.apple.driver.AppleFWOHCI               4.7.3
com.apple.BootCache   31.1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib                1.0.0d1
com.apple.driver.AppleEFINVRAM          1.4.0
com.apple.driver.AppleAHCIPort             2.1.7
com.apple.driver.AppleUSBEHCI              4.2.4
com.apple.driver.AppleUSBUHCI             4.2.0
com.apple.driver.AppleACPIButtons      1.3.6
com.apple.driver.AppleRTC        1.3.1
com.apple.driver.AppleHPET      1.5
com.apple.driver.AppleSMBIOS                1.7
com.apple.driver.AppleACPIEC 1.3.6
com.apple.driver.AppleAPIC      1.4
com.apple.driver.AppleIntelCPUPowerManagementClient         142.6.0
com.apple.security.sandbox       1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall           2.1.12
com.apple.driver.AppleIntelCPUPowerManagement     142.6.0
com.apple.driver.AppleProfileReadCounterAction           17
com.apple.driver.AppleProfileTimestampAction               10
com.apple.driver.AppleProfileThreadInfoAction               14
com.apple.driver.AppleProfileRegisterStateAction          10
com.apple.driver.AppleProfileKEventAction       10
com.apple.driver.AppleProfileCallstackAction    20
com.apple.iokit.IOSurface           74.2
com.apple.iokit.IOBluetoothSerialManager         2.4.5f3
com.apple.iokit.IOSerialFamily   10.0.3
com.apple.driver.AppleHDAHardwareConfigDriver          2.0.5f14
com.apple.driver.IOBluetoothHIDDriver               2.4.5f3
com.apple.driver.AppleMultitouchDriver             207.11
com.apple.driver.DspFuncLib     2.0.5f14
com.apple.iokit.IOAudioFamily 1.8.3fc2
com.apple.kext.OSvKernDSPLib                1.3
com.apple.driver.AppleSMBusController              1.0.10d0
com.apple.iokit.IOFireWireIP     2.0.3
com.apple.iokit.AppleProfileFamily         41
com.apple.driver.AppleHDAController   2.0.5f14
com.apple.iokit.IOHDAFamily     2.0.5f14
com.apple.iokit.IO80211Family 320.1
com.apple.iokit.IONetworkingFamily      1.10
com.apple.driver.IOPlatformPluginFamily            4.7.0a1
com.apple.driver.AppleSMBusPCI           1.0.10d0
com.apple.driver.AppleBacklightExpert 1.0.1
com.apple.iokit.IONDRVSupport              2.2
com.apple.driver.AppleSMC       3.1.0d5
com.apple.driver.AppleThunderboltEDMSink     1.1.1
com.apple.driver.AppleThunderboltEDMSource               1.1.1
com.apple.kext.ATI6000Controller           6.3.6
com.apple.kext.ATISupport        6.3.6
com.apple.iokit.IOGraphicsFamily            2.2
com.apple.driver.AppleThunderboltDPOutAdapter         1.3.2
com.apple.driver.AppleThunderboltDPInAdapter            1.3.2
com.apple.driver.AppleThunderboltDPAdapterFamily   1.3.2
com.apple.driver.AppleThunderboltPCIDownAdapter   1.1.6
com.apple.driver.AppleUSBHIDKeyboard             141.5
com.apple.driver.AppleHIDKeyboard     141.5
com.apple.driver.BroadcomUSBBluetoothHCIController               2.4.5f3
com.apple.driver.AppleUSBBluetoothHCIController        2.4.5f3
com.apple.iokit.IOBluetoothFamily         2.4.5f3
com.apple.iokit.IOUSBMassStorageClass              2.6.7
com.apple.iokit.IOSCSIBlockCommandsDevice   2.6.8
com.apple.iokit.IOUSBHIDDriver               4.2.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice      2.6.8
com.apple.iokit.IOBDStorageFamily        1.6
com.apple.iokit.IODVDStorageFamily     1.6
com.apple.iokit.IOCDStorageFamily        1.6.1
com.apple.driver.AppleUSBMergeNub 4.2.4
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.driver.XsanFilter        402.1
com.apple.iokit.IOAHCISerialATAPI         1.2.6
com.apple.iokit.IOSCSIArchitectureModelFamily              2.6.8
com.apple.driver.AppleThunderboltNHI               1.2.6
com.apple.iokit.IOThunderboltFamily    1.4.9
com.apple.iokit.IOFireWireFamily            4.2.6
com.apple.iokit.IOUSBUserClient             4.2.4
com.apple.driver.AppleFileSystemDriver              2.0
com.apple.iokit.IOAHCIFamily    2.0.6
com.apple.iokit.IOUSBFamily     4.2.4
com.apple.driver.AppleEFIRuntime         1.4.0
com.apple.iokit.IOHIDFamily      1.6.6
com.apple.iokit.IOSMBusFamily                1.1
com.apple.security.TMSafetyNet             6
com.apple.kext.AppleMatch      1.0.0d1
com.apple.driver.DiskImages     289
com.apple.iokit.IOStorageFamily              1.6.3
com.apple.driver.AppleACPIPlatform     1.3.6
com.apple.iokit.IOPCIFamily       2.6.5
com.apple.iokit.IOACPIFamily    1.3.0
System Profile:
Model: iMac12,1, BootROM IM121.0047.B0A, 4 processors, Intel Core i5, 2.7 GHz, 8 GB, SMC 1.71f22
Graphics: AMD Radeon HD 6770M, AMD Radeon HD 6770M, PCIe, 512 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x9A), Atheros 9380: 4.0.35.3
Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Network Service: AirPort, AirPort, en1
Serial ATA Device: Hitachi HDS722020ALA330, 1.82 TB
Serial ATA Device: OPTIARC DVD RW AD-5690H
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: Officejet Pro 8000 A809, 0x03f0 (Hewlett Packard), 0x3612, 0xfd140000 / 5
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0xfd110000 / 4
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd120000 / 3
USB Device: FaceTime HD Camera (Built-in), 0x05ac (Apple Inc.), 0x850b, 0xfa200000 / 3
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: Keyboard Hub, 0x05ac (Apple Inc.), 0x1006, 0xfa130000 / 5
USB Device: Apple Keyboard, 0x05ac (Apple Inc.), 0x0220, 0xfa132000 / 8
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8215, 0xfa111000 / 6

There is something incompatible would be my guess. Did you disconnect all your peripherals in safe mode just to check?
You might now create a new temporary user account. Log into the new account. Do the panics still occur?
I would also visit The XLab FAQs and read the FAQ on diagnosing kernel panics. Sometimes they can be difficult to track down. Looking at each new panic log would help determine if it's cause is associated with the same extensions.

My i phone will not open my yahoo mail, but sits and spins. I have reset the phone and network and still no help. Any other ideas?

My i-phone stopped receiving e-mail on a regular basis. Rather, it will sit and spin trying to load and then stop. Usually, sometime in the night, it will all of a sudden load all of my mail, but then will not load new mail again. I have updated and reset the phone and network, and the problem remains the same. Does anyone know a fix for this issue?

Try deleting the account, restarting your phone and then reinputting the account.

Hi, when ever I'm using 3G, on my Iphone4 sim stops working and Network is lost, this started after I updated my phone with 6.0.1(10A523)version. Please help how to solve this problem.

Hi, when ever I'm using 3G, on my Iphone4 sim stops working and network is lost, this started after I updated my phone with 6.0.1(10A523)version. Please help how to solve this problem. Thanks.

Photos/videos in the Camera Roll are not synced. Photos/videos in the Camera Roll are not touched with the iTunes sync process. Photos/videos in the Camera Roll can be imported by your computer which is not handled by iTunes. Most importing software includes an option to delete the photos/videos from the Camera Roll after the import process is complete. If is my understanding that some Windows import software supports importing photos from the Camera Roll, but not videos. Regardless, the import software should not delete the photos/videos from the Camera Roll unless you set the app to do so.
Photos/videos in the Camera Roll are included with your iPhone's backup. If you synced your iPhone with iTunes before the videos on the Camera Roll went missing and you haven't synced your iPhone with iTunes since they went missing, you can try restoring the iPhone with iTunes from the iPhone's backup. Don't sync the iPhone with iTunes again and decline the prompt to update the iPhone's backup after selecting Restore.

Classic and Network

Similar Messages

Maybe you are looking for