Classic chooser settings in OS 10.4

I have a lab of eMacs that are running 10.4 and classic. I need to select a printer in the chooser in classic on each of the eMacs but I'm trying to figure out how I can do this with ARD 2 so I don't have to physically go to each computer. Is the printer that is selected in the chooser stored somewhere in the classic system folder? It seems like there should be a preference file or something similar that I can copy from a computer that has the printer selected to the other computers. Any help is much appreciated! Thanks!

The LaserWriter 8 Prefs file in Preferences:Printing Prefs folder stores that information. Good luck, hope this helps.

Similar Messages

For the iPod Classic, in settings, how does the volume limit work? After setting a limit, how to re-set to a new volume limit?

For the iPod Classic, in settings, how does the volume limit work? After setting a limit, how to re-set to a new volume limit?

This thread - with a quote from an LR4 Beta thread - says that all 6 central Basic controls in PV2012 (Exposure thru Blacks) are now image-adaptive, as were Recovery, Fill Light, and Clarity in previous versions:
http://forums.adobe.com/message/4253485
Whether they are suitable for creating a Timelapse sequence without significant flicker is entirely subjective and up to you - and of course, dependant on your specific images & how they change over time. Sorry, not much advice beyond try PV2012, and revert back to PV2010 if you get too much flicker.

6500 classic - security settings problem

I have Nokia 6500 classic and I have a little problem with it. When I go to the Security settings menu Security module settings is not active. When I push on it it tells me to Insert security module. Can someone explain to me what should I do because there is nothing in the users manual about the security options.
Thank you in advance!!!

If you don't have a security module (not many people do) then you will never need to use this option.
Security modules are expensive and are used by certain agencies that need heavily encrypted lines.

Nokia 3110 Classic - Some settings :/

I just upgraded my phone from Nokia 2100 to Nokia 3110 Classic (finally, yay.)
In my 2100 I had a couple of settings I used.
a) Setting to change the amount of time the phone lights up.
b) Setting to change how long the phone waits before going into standby mode.
Not sure if those are the same things, but my 3110c lights up for quite a while

You can no longer set the time it takes for the backlight to go off. The other setting you will find under the screen saver settings menu in your display settings menu.

Nokia 3120 classic display settings

Hi!
The "Nokia 3120 classic User Guide" (9207764, Issue 3) in chapter 6. Settings -> Display says:
Sleep mode -- to save battery power, the display turns black when no function of the phone is used for a certain time
If I understand correctly the purpose of that option, when it is set to on it should turn off the back light of the display when the phone is not used for some time (a few seconds). By default that option is enabled.
I tried to disable that option (set it to off) but nothing changed -- the display light turns off very quickly, which is very annoying for example when reading/writing messages. To prevent the display light to turn off you need to press a key every few seconds.
I also tried to disable the "power saver" option in the display settings but I didn't notice any difference either.
IMHO, there is a bug in the phone firmware regarding those options. Moreover I thing that user should be able to change the time interval after which the display light is turned off in the sleep mode.
Another issue with that phone behavior: Using an analog or digital clock as a screen saver (Settings -> Display -> Screen saver) is quite convenient because the default digital clock in top right corner of the display uses very small font. When the keyboard is locked, the screen saver activates after a few seconds of inactivity (that time interval should be adjustable too), but the display light turns off also, which is OK when the keyboard is locked. Now the question is how to turn on the display light (to see the clock in the screen saver) without turning off the screen saver at the same time? Currently you have to do the following:
(1) press one of the navigation keys in order to turn on the display light
(2) wait a few seconds in order to activate the screen saver
The firmware version used is:
V 07.16
27-05-08
RM-364
Any comments?
-- rpr.

Can someone from Nokia please response to this thread? The lack of control over the display light duration is a huge disadvantage of the 3120. It sounds like a small issue, but it is really not. I would recommend anyone who is interested in the 3120 NOT to get it, for this exact reason.

Classic- chooser

I just got an Epson CX6000. I installed it just fine, and my Photoshop 5 and Freehand 9 programs that run in Classic can access the printer, but in the print dialogue box there is no "preview" button.
When I had that issue with my previous printer (hp1310) I would go to chooser, select the 1310, go back to my file, click print and the dialogue box would have changed, ie. have a preview buton, among other changes.
Well, when I go to chooser, the CX60000 is NOT there to be choosen. I can't for the life of me remember what I did before with previous printers to get them into the chooser, (if I did anything at all).
The printer is on my printer list, it is my default printer, I have restarted since making changes.
I've only had Tiger (10.4) since Jan. I've looked all through support topics mentioning "chooser". Most deal with networked computer printing problems.
Do I need to install the printer in Classic as well as Tiger? How?
G4 Mac OS X (10.4.3)
G4 Mac OS X (10.4.3)

The LaserWriter 8 Prefs file in Preferences:Printing Prefs folder stores that information. Good luck, hope this helps.

6120 Classic MMS Settings-USA

I have a 6120 Classic. It is definitely the best bargain going right now. Anyone know what I can do to make sure that I can send and receive MMS. AT&T operator.

Call AT&T for the settings
Nokia N95
V 20.0.015
0546553

3110 classic discards settings--HeeeeeeeeeeLLPPPPP...

3110 classic keeps giving the following error when i receive settings from my operator :-
ONLY 70 SETS ALLOWED. SETTINGS DISCARDED.
I've tried everything,but no progress. the last resort i opt to is just doing manual cofigurations of gprs and mms.
need help support teams....
What's Worth Doing, Is Worth Doing Well!
All "N-series" are incredible!

You can no longer set the time it takes for the backlight to go off. The other setting you will find under the screen saver settings menu in your display settings menu.

Ipod Classic audiobook settings

I have placed audiobooks onto my Ipod Classic 160G, I have managed to put into one long book on my Itunes but not on my ipod. It shows each track seperate (and theres roughly 500 tracks per book) and wont skip onto the next one no matter not if I turn the autoreply off.
Can anyone tell me how I can get my Ipod to recognise the chapters as one book?
Also how can I get my Ipod to play the chapters one after another?
I would like anyhelp I can get with this.

Obviously there is actually NO WAY to use the section "audiobooks" for more then ONE audiobook. And this have to have only one file... I know that ***!
The only work around is like this:
create in iTunes for every single Audiobook a seperate playlist. Put the according book into this list and sync the lists to your classic. So do I at the moment also. There the iPod also will sort all tracks by name. I recommend to reassign the Tracknames like "001 - [name of book]", "002 - [Name of Book]" aso. So you make sure that your book will be played in the correct sequence.
I hope apple will fix this section by taking a look at the way the iPhone and iPod Touch is handling the audiobooks. there every book is shown as seperate album. Until this, the workaround is the only way to listen to your audiobooks...

Nokia 6700 Classic sensor settings

Hi.
I have just recently bought the Nokia 6700, and was pretty impressed by the feature that allows you to view the clock, mute, reject calls etc by tapping the phone. However, I've been unable to get it to work. Any clues as to what could be wrong here? I've activated it through the phone settings, but still no joy.
Thanks very much.

try taking out battery for 5 mins have a look through the user guide below
http://nds1.nokia.com/files/support/apac/phones/guides/Nokia_6700c_UG_en.pdf
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Player Settings Menu Intermittently Does Not Work / Settings Manager Crashes - Firefox 6.0/Windows 7

1) I occasionally have a problematic issue with the Flash Player Settings menu, primarily with SocialVibe (media.socialvi.be) applications associated with FarmVille, activities such as video quizzes and interactive surveys. Sometimes after loading these applications, the Player Settings menu opens requesting permission for local storage space changes, however I am unable to left-click on anything at all within the Player Settings menu: Allow/Deny the requested change, manual storage setting adjustment, switching tabs within the menu, or (particularly frustrating) to close the menu. Usually if the Player Settings menu requests a local storage change, I can select my preference and it works properly.
When the Player Settings menu opens and is non-functional, the application will still run in the background, seemingly without issue, but is inaccessible because the Player Settings menu is active. I have tried closing/refreshing the application, but the menu still remains unusable. Many times there are several activities offered one right after another. When one is completed, the link refreshes and a new application becomes available. Each application is unique and only available for a very limited time. The inability to make changes or close the Player Settings menu effectively blocks these activities from being completed. Since I cannot complete the activity, the link for itwill not refresh, so I am stuck with an application where the Player Settings menu will not function properly and I have no opportunities for new activities.
Interestingly, when the Player Settings menu is oblivious to left-clicking with the mouse, I am able to select the options of Allow/Deny/Close by using the tab key on the keyboard to highlight the appropriate button, however pressing enter does nothing. I can also right-click with the mouse and access the menu for Settings/Global Settings/About, which works properly. In this menu, when I choose Settings, it takes me to the Local Storage tab of the Player Settings menu, however I am still unable to make any changes, switch tabs or close the menu. When I choose About, it will load the Flash Player webpage and it does tell me that I have the most current version (10,3,183,5) successfully installed. When I choose Global Settings, it will open the Flash Player Settings Manager, which I am able to navigate and modify (mostly, related issue below).
2) I also have an issue with the Flash Player Settings Manager. When I try to open the Local Storage Settings by Site, the Settings Manager will usually crash. It crashes whether I open the Settings Manager from the Player Settings right-click menu or through the Windows Control Panel. I had originally assumed that there must be so many websites listed that want storage permissions that it takes a while to load, but until this evening it had never loaded successfully and would go unresponsive almost immediately. This evening I attempted to access the Local Storage Settings by Site many times, crashing and restarting the Settings Manager, until it finally loaded.
In the Local Storage Settings by Site, media.socialvi.be (SocialVibe) is shown as having 0kb Storage Used and Ask Me under Storage Settings. Because every application from SocialVibe is different, I want Flash to ask me each time it wants to change the storage settings, so I do not want to set its permission to Allow. From reading through the Flash troubleshooting webpages, I understand that choosing Block may cause the applications to not run correctly, and I do want them to run properly. The local storage request from media.socialvi.be was 5kb as shown in the Player Settings menu (that wasn't working), so if the Player Settings menu is not functioning and I must allow some level of storage, is there a way that I can specify how much to allow using the Settings Manager without setting the permission to Allow? I do not feel that websites should be able to store as much information as they see fit on my machine, and as I want to keep as much advertisement information, tracking, cookies, etc. off my computer as possible, setting the permission to Allow seems to be a risky permission.
System Specs:
162 GB Free harddrive space (220 GB Total)
Pentium(R) Dual-Core CPU [email protected] GHz
Windows 7
Mozilla Firefox 6.0
DSL Cable Internet Connection
Thank you

Try http://forums.adobe.com/thread/892474

Codec settings not available greyed out AME Premiere Pro

Hello,
In CC 2014, when I want to transcode something to Quicktime/ProRes codec, the usual "Codec Settings" button in the Video Codec field is greyed out or not available. It was available in CS6... I could click on it and choose settings, but now I can't.
Just a little bg, but I don't think it matters, I can't choose it no matter what QT codec I choose: I have 23.976 final output that I want to convert to 29.97i for broadcast. Unfortunately, through various tests, in order to get the pulldown correct (without field blurring frames), in CS6 I would set it up in AME, then click the Codec Settings, and select Interlaced. Under Basic Video Settings field all is the usual 29.97, Upper First, etc. But to actually get the correct pulldown (repeat frame every 3 or 4 frames) I need to select the Codec Settings and select interlaced. Unfortunately, in CC 2014, I can't seem to access this option.
Any ideas? Codecs are in the system, everything else seems as it should be...
Thanks,
J

If the volume/disk is setup to be handled by ACLs (the default for 10.4.x) the older style "inherit permissions" is greyed out.
You can achieve inherited permissions from adding ACL permissions to the shared volume/folder by going to Sharing, Access "tab" in WGM. The first level of the share is never inherited (no) but the next level "down" will be (yes).
ACLs on or off is set in WGM by using the All "tab" in Sharing, choosing the volume and the General "tab".
ACLs override the POSIX settings: owner, group, everyone, and is hierarcial (permission list is read/enforced from top -> bottom, first matching "rule" goes)

Settings In Walkman not working after update to Android 4.3

Hi Guys,
i just recently updated my Z1 from 4.2.2 to 4.3 and whenever I choose Settings inside Walkman, it says "Unfortunately, Walkman has stopped working". Can you please help?

Yes,but sometimes it gives better overall performance,since first when you update things can go wrong.But if you do not want to repair,visit a nearby sony center.
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

How can I get Acrobat to save my recent print settings?

Hi there,
Setup:
Mac OSX 10.7.3
Acrobat X 10.1.2
Having recently upgraded to the most recent Acrobat pro I seem unable to save my most recent print settings. Previosuly, when I setup a page to be, for example, A2 landscape with some specific printer settings, it would then present these same settings when I went to print the same document or another open document. Now, in 10, I can setup the page settings and print settings, print a document, and then when I try and print again it has defaulted to the default page setup (A4 portrait) and default print settings.
This is SO infuriating that I am hoping it is a bug (fixable?) and not just a massive failure of the software.
Thanks for any advice/help.

I'm not sure (since I always print to the same size), but try this:
Click the Page Setup button at the bottom of the dialog. Ignore the warning screen. Set up the Page Setup in Mac OS X the way you like. At the top, choose Settings and select Save as Default. Then click OK.
Click the Printer button at the bottom of the dialog. Ignore the warning screen. Set up the Print settings in the way you like using the popup menu which initially shows Layout. Then choose Presets > Save Current Settings as Preset. Then click OK.

InDesign documents, exported to .pdfs then printed on PC and Mac laser printers - what are best settings?

Our in-house creative department produces a lot of materials that are no longer going to our commercial printer.
Projects are created in Adobe InDesign, exported as .pdfs and stored on a site, where marketing partners can then download the .pdfs and print.
Usually from laser printers, usually pcs.
I would appreciate any advice on choosing settings for the .pdf (export) to help manage color etc.
thank you

If you are printing to laser printers by people that are not knowledgeable about color settings and device capabilities. I would not use Color Management. I would stick to something simple like Press Quality so that all the fonts used in your document will be embedded into the pdf so that you do not have to worry if the person printing the file has the fonts used in creating the documents.

Classic chooser settings in OS 10.4

Similar Messages

Maybe you are looking for