Classic environment won't load

after a recent software update, classic will no longer load. The window starts to load, but just before loading is complete, the status bar stops moving and classic stops loading.
Any thoughts? I cannot run any of my older software without classic.
Thanks.

Try littleshoulders's tip about Repair Permissions first. Youy can also use System Preferences> Classic to open Classic with Extensions Off and see if that allows it to start; if so, you can use the Classic Extensions Manager Control Panel to work through what extensions are active,. disabling a few at a time until you determine which is at the root of the problem. Let us know if Classic launches after Repair Permissions and/or Extensions Off; that shoud help determine if you need to refer to something like the No "blessed" Mac OS 9 System Folder section of Mac OS X: Classic doesn't start, Mac OS 9 not installed or recognized or even to OS X: How to Perform Mac OS 9 Clean Install or not.

Similar Messages

  • My i-Pod Classic 160GB won't load MPEG-4 video files.

    My i-Pod Classic 160GB won't load MPEG-4 video files, a message says "file type not supported." I've checked the file types I have been able to watch in i Tunes and these are MPEG-4 video files and these work ok. Any help?...Thanks.

    The files didn't actually contain any video! They were corrupted.

  • Cd-rom with classic program won't load after installing classic

    I tried to install a program that said it required classic support, so I installed classic from my installation disk.
    Classic seems to be running without any problems, but now when I put in the cd-rom for the software I was trying to install it won't mount.
    Other cd's seem to mount fine, but not this one.
    Am I missing an extension or driver to mount a cd in OS 9?

    WithaK, do you mean Classic 9 seems to be running on top of OS X, or that you booted the Mac is pure OS 9, please?
    If Classic 9 is running over X, any CD should behave exactly as it did before until perhaps you try to view it from an OS 9 application.
    If the Mac is booted in pure OS 9 it might need some format translators so exactly which files in System Folder>Extensions have the words "File Access" on the end of their names, please?

  • I can't load a cd- it says "the classic environment is no longer supported" .

    Hi, I got a cd with a book for my kid, and when we try to load it, it says it can't open because the "classic environment is no longer supported". I assume it means the cd is old. Any hints? He'd LOVE to use it.
    Thanks, Ali

    Tell us more about the file.
    Is it on a CD?

  • Classic won't load, error message

    The classic on my eMac won't load and I am getting an error message that says the "Epson launcher failed and could not be opened because the Epson message could not be found." I tried reinstalling classic from the original disks and also reinstalled my Epson printer software but neither made any difference. Can anyone give me some advice? Thanks!

    hi kathy kaberle--
    have you tried going into the classic preferences in system preferences and trying to launch classic without the extensions?? also, have you tried launching classic without the printer software there at all? have you tried removing any epson items in /library/startupitems folder or in system preferences > accounts > startupitems?? [ 8 ) ]

  • Classic won't load 9.1 from second hdd

    I have a Powermac G4 Quicksilver (733 mHz, updated to OS X 10.4.8) that I recently purchased from eBay as a gift for a family member. She was running an older G3 (233 mHz, Mac OS 9.1). I took the little 6 GB hard drive from the old Mac and slaved it to the new hdd. OS X found it nicely, with all of the files and applications in place. Super.
    However, I’m having issues getting "Classic" to start. It tells me “you have Mac OS 9.1 installed, it is recommended you upgrade to 9.2”. Then, 9.1 begins to load...but the progress bar stops at a tiny sliver and goes no further. I have to force quit. I’ve tried starting Classic from System Preferences with extensions off, etc., with no luck. Classic does see the System Folder on the old hard drive for OS 9.1 as a valid system folder.
    I downloaded the 9.2.1 and 9.2.2 updates, but OS X tries to load Classic in order to install (argh). I copied over the 9.2.x updates to the old drive, and tried to change the startup disk in System Preferences to the 9.1 System Folder on the second drive in order to update to 9.2.2, but it still boots to OS X. I went as far as to disconnect the OS X hdd from the bus and set the 9.1 hdd to master, but I get the dreaded folder/question mark/Mac Smileyface, and 9.1 won’t load.
    I should note I didn't see a Classic option within OS X until I added the old hard drive to the system. The OS X System folder doesn’t appear to contain an OS 9 folder for Classic to choose. Any ideas, Macheads?
    G4   Mac OS X (10.4.8)  

    Hi, Micheal. Thanks for the welcome.
    I'm not sure. I know the G3 was initially purchased with 8.x, and then upgraded to 9.1 at some point. I didn't realize that Apple built their OSes to be CPU specfic, so it would be difficult to answer that question. You think this is the case? I thought the G4 was built to be backward compatible with previous versions of Mac OS.
    David

  • Why is it when I try to load photoshop 5.5 it says "cannot open the application install 5.5 b/c the classic environment is no longer supported"?

    What does it mean; "cannot open the application photoshop 5.5 because the classic environment is not supported"

    It's not part of Mac OS X 10.5 on a PowerPC Mac or of any OS on an Intel Mac. You need to use Mac OS X 10.4.11 or earlier, or a newer Photoshop version.
    (60435)

  • Printing a file created in OS 9.2 "classic" environment

    I have just installed OS 10.3.9, but still want to work in classic environment (OS 9.2, AppleWorks 5.0) & print out the documents I create. I have used my printer (Epson C42UX) installation disc but when I click on chooser in classic environment, the printer is not listed.
    iMac 400 graphite, powerPC G3 processor (400Mhz), 644MB RAM, crt, slot-loading   Mac OS X (10.3.9)  

    I've tried many times but I can't find a driver for OS 9 on the Epson installation disc, so only OS X is installed. I have made some progress - now the Epson C42ux icon is appearing in the chooser window, but I can't print from it in classic.
    Probably only because the Chooser sees it through its USB connection. You still won't be able to print to it out of Classic until you install OS 9 drivers, just as if you were on a Mac running OS 9. Good news is I located the OS 9 drivers on Epson's site. You can get it here. Drivers 7.3bA in the center. To install, you'll first have to have OS 9 (Classic) running. Then run the installer per normal.

  • Running classic environment

    Sorry I posted this incorrectly on the bottom of someone else's thread.
    I have been given a Powerbook G4 running OX 10.4 I have no discs with it. I would like to be able to run some of my son's games which require classic. Classic was never set up on the computer so I need a classic system folder. I bought OS 9 from ebay thinking that this would solve my problems. I am unable to boot from this cd and can't load it as it requires classic to do that. So I'm back to square one - does anyone know what my options are?
    Thanks

    The processor is a 1.5GHz Power PC G4 with memory 512.
    I use our desktop (which is a PC) and I was over my son playing his games on it (as they always seem to stuff it up). This Mac was given to us by my brother inlaw as he didn't want it anymore (he's a researcher and has upgraded a while ago). He thought it would be good for the kids to watch movies on and play a few games (they are only 3 & 5)as they are fairly indestructable and I have to admit it is nice to use.
    The problem is that I sort of feel like a Beta video owner from the 90's with only one row of movies to pick from - some of the games I already had are good for Mac too but require the classic environment. I have ordered a few others that are OS X specific but generally it seems to be only the more expensive ones and a limited selection - I'm new to Mac so I could be wrong.
    So back to my problem, I did buy a OS 9 install disc off ebay but it won't boot etc so it is no use to me. If someone could tell me what would work I'd happily look for it but I already paid $50 for the OS 9 with not much luck.

  • I just installed LV2011 and one dll from my vi won't load with the error "application configuration is incorrect"

    I just installed LV2011 and one dll from my vi won't load with the error "application configuration is incorrect", which is Windows lingo for "missing package dependencies".  All the computers at my company with 2010 loaded seem to do OK.  When I do a Dependencies Walk I get missing Visual C debug dll's missing plus IEshims and wer which both have a whole tree of dependencies missing on my machine.  The Windows install is the same "Windows XP version 2002 Service Pack 3" on my PC and the working PC's. So I'm thinking I have to uninstall 2011 and go back to 2010.  Is this correct?  Those VC debug dll's were installed on the machines with 2010 in them but were not installed in mine.
    I've heard the advice to recompile the dll with debug turned off but I don't have access to the source code.
    Thanks in advance.

    u87 wrote:
    Thanks for the reply.  This at least tells me that going back to LV2010 is not likely to solve the problem.  The missing dll's are:
    MFC90D.dll
    MSVCR90D.dll
    IESHMS.dll
    WER.dll
    And, once again, IESHMS and WER have other dependencies.  So perhaps i need to install the Visual C++ development environment.
    IESHIMS.dll is an Internet Explorer DLL that gets usually delay loaded by shdocvw.dll. As delay load it can not cause DLL load errors but only runtime errors. Maybe your DLL has it as direct dependency but that is unlikely since it does not have a documented interface.
    WER.dll is Windows error reporting for Vista/Win7.
    MFC90D.dll is the Microsoft Foundation classes and MSVCR90D.dll is the MS C runtime library, both as debug variant.
    So all the DLLs you mention are actually MS DLLs! You haven't identified the DLL that you try to access in LabVIEW that causes these error messages. IESHIMS and WER are usually delay loaded by any component that needs it and should not likely be used by non MS code.
    What is the DLL you try to load into LabVIEW and by whom? Get the provider of that DLL to provide you a non Debug build of the DLL. Installing Visual C on all the machines just to make the DLL load is not a solution, besides that it is likely not legal since I doubt you have that many licenses.
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • I have a iPad were I have opened I tunes match ect linked to my pc I have since found my old ipod classic which I have loads of music on but that was all linked to a mac which I don't have anymore, is there anyway I can sync them both

    I have a iPad were I have opened I tunes match ect linked to my pc I have since found my old ipod classic which I have loads of music on but that was all linked to a mac which I don't have anymore, is there anyway I can sync them both without loosing my music, if I plug my ipod into PC it won't read it

    You need to transfer the music from your iPod on to your iTunes library on your PC, since that is where you are currently syncing and where you are signed into iTunes Match.  It doesn't matter that you were previously syncing it with a Mac, and you won't need to reinstall iTunes on your PC.  But you will have to use 3rd party software such as Touch Copy to transfer any music not purchased from the iTunes store from your iPod to your iTunes library.  Here's another guide on this, which is shoter and you may find easier to follow: Syncing to a "New" Computer or replacing a "crashed" Hard Drive.  Also, if you're using iTunes 11, go to View>Show Sidebar.  This will make it easier to follow along with these guides.

  • Is it possible to run the Classic Environment INSIDE Rosetta on a MacBook Pro (Early 2008) with Leopard?

    Hi there,
    Rosetta works up until Snow Leopard. The Classic Environment works up until a late version of Tiger. Rosetta makes apps. built for PowerPC Macs work. The Classic Environment make apps. for Mac OS 9 work on Mac OS X for PowerPC Macs.
    Would it consequently be possible to run the Classic Environment INSIDE Rosetta?
    I have read https://discussions.apple.com/docs/DOC-2292, but I am still unconvinced unless there is a flaw to my logic. At any rate, I subscribe to the Churchillian adage of never giving in unless the forces of common sense and doctrine dictate otherwise.
    If it won't work, then why?
    Best Regards,
    Stefan

    Hi there, Klaus1, BDAqua and a brody,
    Thank you ever so much for your kind replies! (I tried giving you the 10 pts. of 'Correct Answers' to each of you, but unfortunately it was only possible for Klaus1, so the points were distributed between him and BDAqua even though you were all helpful!)
    My next question will naturally be: Is SheepShaver legal? My Google search didn't yield any conslusive proof that it was, nor any that it wasn't, but as the E-Maculation web page seemed quite official and above board I would assume that it is.
    The next logical step would be to ask whether it's safe for both HW and SW to run SheepShaver. HW, it appears, is very rarely, if ever, affected by SW settings, so I would assume that hardwarewise, I'm good to go. Could it ruin the kernel of Mac OS X's Unix-based operating system?
    Kind Regards,
    Stefan

  • Certain web sites won't load on any browser on Macbook Pro

    Starting yesterday certain web sites won't load on any browser (Safari or Chrome). These include sites like the New England Journal of Medicine, Washington Post, and English Bulldog News. I get an error message in Safari that the server took too long to respond and in Chrome I get a connection timeout error message. I updated Adobe Flash with a clean install as I was unable to update using the standard method due to connection timeout. That restored my access to YouTube video but today it takes ~2 minutes to load a YT video. Web sites are loading fine on my phone and household PCs.
    Not sure if it is notable that my internet loading capacity has been very slow for some time. I worked with the internet company to increase the network speed but my computer has not seen benefit. No problems on the PCs in our house but my Macbook very frequently gets partially "kicked-off" the network as indicated by yellow lights seen next to the "internet" and "server" items in my Network Diagnostics utility.
    I looked at old threads and ran EtreCheck (see results copied below) as was recommended to another user several months ago, but would appreciate any thoughts about where to go from here. Could it be malware? Or just a classic case of operator error? Here are the EtreCheck "red" items extracted from the full report below:
    User Launch Agents: ℹ️
      [loaded] com.adobe.ARM.[...].plist [Support]
      [failed] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
    Internet Plug-ins: ℹ️
      Flash Player: Version: 16.0.0.235 - SDK 10.6 Cannot contact Adobe
    FULL RESULTS:
    EtreCheck version: 2.1.4 (107)
    Report generated December 17, 2014 12:02:37 PM CST
    Click the [Support] links for help with non-Apple products.
    Click the [Details] links for more information about that line.
    Click the [Adware] links for help removing adware.
    Hardware Information: ℹ️
      MacBook Pro (13-inch, Mid 2012) (Verified)
      MacBook Pro - model: MacBookPro9,2
      1 2.5 GHz Intel Core i5 CPU: 2-core
      8 GB RAM
      BANK 0/DIMM0
      4 GB DDR3 1600 MHz ok
      BANK 1/DIMM0
      4 GB DDR3 1600 MHz ok
      Bluetooth: Good - Handoff/Airdrop2 supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 4000 - VRAM: 512 MB
      Color LCD 1280 x 800
    System Software: ℹ️
      Mac OS X 10.7.5 (11G63b) - Uptime: 12:26:55
    Disk Information: ℹ️
      TOSHIBA MK5065GSXF disk0 : (500.11 GB)
      disk0s1 (disk0s1) <not mounted> : 210 MB
      Macintosh HD (disk0s2) / : 499.25 GB (261.25 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      MATSHITADVD-R   UJ-8A8
    USB Information: ℹ️
      Apple Inc. BRCM20702 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Computer, Inc. IR Receiver
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Inc. FaceTime HD Camera (Built-in)
    Thunderbolt Information: ℹ️
      Apple, Inc. MacBook Pro
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist [Support]
      [loaded] com.microsoft.office.licensing.helper.plist [Support]
    User Launch Agents: ℹ️
      [loaded] com.adobe.ARM.[...].plist [Support]
      [failed] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist [Details]
      [loaded] com.citrixonline.GoToMeeting.G2MUpdate.plist [Support]
      [loaded] com.google.keystone.agent.plist [Support]
      [running] com.spotify.webhelper.plist [Support]
    User Login Items: ℹ️
      iTunesHelper ApplicationHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
      Music Manager UNKNOWNHidden (missing value)
      Speech Startup Application (/System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SpeechRecogn ition.framework/Versions/A/Speech Startup.app)
      Dropbox Application (/Applications/Dropbox.app)
      Music Manager ApplicationHidden (/Users/[redacted]/Library/PreferencePanes/MusicManager.prefPane/Contents/Helpe rs/MusicManagerHelper.app)
      Spotify Application (/Applications/Spotify.app)
    Internet Plug-ins: ℹ️
      Flip4Mac WMV Plugin: Version: 2.4.4.2 [Support]
      FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
      QuickTime Plugin: Version: 7.7.1
      Flash Player: Version: 16.0.0.235 - SDK 10.6 Cannot contact Adobe
      AdobePDFViewer: Version: 10.1.4 [Support]
      SharePointBrowserPlugin: Version: 14.3.2 - SDK 10.6 [Support]
      Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
      JavaAppletPlugin: Version: Java 7 Update 09 Check version
    User internet Plug-ins: ℹ️
      CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Support]
    3rd Party Preference Panes: ℹ️
      Flash Player  [Support]
      Flip4Mac WMV  [Support]
      Java  [Support]
      MusicManager  [Support]
    Time Machine: ℹ️
      Time Machine not configured!
    Top Processes by CPU: ℹ️
          18% Google Chrome
          8% WindowServer
          2% SpeechRecognitionServer
          2% coreaudiod
          2% hidd
    Top Processes by Memory: ℹ️
      232 MB Google Chrome
      189 MB System Preferences
      129 MB Spotify
      86 MB Spotify Helper
      77 MB WindowServer
    Virtual Memory Information: ℹ️
      952 MB Free RAM
      4.99 GB Active RAM
      1.52 GB Inactive RAM
      1.13 GB Wired RAM
      1.02 GB Page-ins
      0 B Page-outs
    Diagnostics Information: ℹ️
      Dec 16, 2014, 11:36:19 PM Self test - passed

    Update: I ran Console upon trying to load a web site that won't load. Here are the messages from that action with any identical messages deleted:
    12/17/14 1:45:51.013 PM [0x0-0x1b01b].com.google.Chrome: [201:2311:1217/134551:ERROR:location_bar_view_mac.mm(602)] Not implemented reached in virtual void LocationBarViewMac::EndOriginChipAnimations(bool)
    12/17/14 1:45:51.000 PM kernel: Google Chrome He (map: 0xffffff8014ab4138) triggered DYLD shared region unnest for map: 0xffffff8014ab4138, region 0x7fff8a200000->0x7fff8a400000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
    12/17/14 1:46:16.515 PM [0x0-0x1b01b].com.google.Chrome: [604,1956432224:13:46:16.514831] Native Client module will be loaded at base address 0x00006a1600000000
    12/17/14 1:46:16.000 PM kernel: Data/Stack execution not permitted: Google Chrome He[pid 604] at virtual address 0x107509000, protections were read-write
    I forgot to note I have also done the obvious things like computer restart, shut down, and modem reset.

  • How do I install the classic environment?

    I have an iMac slot loader that I got for my daughter. I have a retail version of OSX 10.2 installed on it and working fine.
    I also have alot of games but they require the Classic Environment.
    I have forgotten how to install the Classic environment! I think at one time, I had osX on there and Classic but I don't remember exactly how I got it on there if that was the case.
    I have a retail OS 9.?.? but I don't think that is the answer. I am afraid if I boot to that disc and try to install, it will over write my OSX instalation with OS 9. That would prevent her from using the OSX games that I have for her.
    I don't mind doing a complete new installation if need be because I have not started installing the games just yet.
    Any help would be greatly appreciated!

    Hey Glen,
    I set these iMacs up all the time. I use a retail 10.3.2 or 10.4.3 installer and a 9.2.2 image or a 9.2.1 iMac dedicated installer to set them up. Archive and install will work for either just make sure to install OS 9 drivers if you format your drive in X extended (journaled).
    I do the minimum install in X no language and no printer drivers.
    The installer in 9.2.1 is white with a large orange 9 on it.
    I have a ton of software for OS 9; Living Books, Kid Pix and Zoombinis being amoung the most popular.
    I've made images of the CDs ( actually SMIs ) so the kids don't need the CDs to run the apps. These often get totally messed up.
    Actually I have cloners of all these setups on various setups on my MDD G4 and use CCC to clone them onto the target drives. Often I'll have to use an install CD to get it to work anyway. Some of the more stubborn will require an in situ install with the CD.
    Richard

  • My mail won't load via iCloud on my desktop.  It comes up with the message "Missing resources".  How do I correct this?

    My mail won't load via iCloudonmy desktop.  It comes up with the message "Missing resources".  My network is working properly and I've checked Apple's reporting system to see if any systems are down (they are not). I am asked to submit the report to Apple (which I have)...but how do I correct this error sothat I can access my mail via iCloud on my desktop iMac?

    Here is the error message information:  DOES THIS HELP ANYONE FIGURE OUT WHAT IS HAPPENING?  All other iCloud Services work.
    IS FATAL
    true
    APPLICATION NAME
    mail
    TITLE
    Mail could not be loaded
    MESSAGE
    There was a problem loading the application due to a possible network error or missing resources. Please try again.
    LOG
    Tue, 17 Mar 2015 15:35:30 GMT:  DEBUG: MAIL in main()
    Tue, 17 Mar 2015 15:35:30 GMT:  DEBUG: Creating local CK.User object
    Tue, 17 Mar 2015 15:35:30 GMT:  DEBUG: Creating local CK.AccountPreferences object
    Tue, 17 Mar 2015 15:35:30 GMT:  DEBUG: -->  Request 1:   POST to https://p04-mailws.icloud.com:443/wm/preference?clientBuildNumber=15B.9bb3ce9&cl ientId=548F3122-7920-4BB0-8988-1F5BFD99D289&dsid=1018646875,  headers: Content-Type=text/plain,  body: (omitted)
    Tue, 17 Mar 2015 15:35:30 GMT:  DEBUG: ----------------> Request out: /wm/preference-list-->1426606530328/1
      wmsid: null
      params: {"locale":"en-us","timeZone":"US/Eastern"}
    Tue, 17 Mar 2015 15:35:30 GMT:  DEBUG: SC.Object:sc1473:dispatch('load content')
    Tue, 17 Mar 2015 15:35:30 GMT:  DEBUG: "2.0 Waiting for Content" handled event 'load content' (no transition)
    Tue, 17 Mar 2015 15:35:30 GMT:  DEBUG: SC.Object:sc2647:dispatch('noContent')
    Tue, 17 Mar 2015 15:35:30 GMT:  DEBUG:   "6.2 pop up View" handled event 'noContent' with a transition to "6.2.2 No Content"
    Tue, 17 Mar 2015 15:35:30 GMT:  DEBUG:     -> entering "6.2.2 No Content"
    Tue, 17 Mar 2015 15:35:30 GMT:  WARN:  REJECTING SERVER RESPONSE CoreMail.MailRequest.willReceive:
      Status:0
      Request:/wm/preference
      Wmsid:null
      Redirect Count:1
      Timeout Redirect Count:1
      ResponseText:
    Tue, 17 Mar 2015 15:35:30 GMT:  DEBUG: -->  Request 2:   POST to https://p04-mailws.icloud.com:443/wm/preference?clientBuildNumber=15B.9bb3ce9&cl ientId=548F3122-7920-4BB0-8988-1F5BFD99D289&dsid=1018646875,  headers: Content-Type=text/plain,  body: (omitted)
    Tue, 17 Mar 2015 15:35:30 GMT:  DEBUG: ----------------> Request out: /wm/preference-list-->1426606530328/1
      wmsid: null
      params: {"locale":"en-us","timeZone":"US/Eastern"}
    Tue, 17 Mar 2015 15:35:30 GMT:  ERROR: GIVING UP ON RETRIES, CoreMail.MailRequest.willReceive:
    responseText: ,
    this._redirectCount: 1
    Tue, 17 Mar 2015 15:35:30 GMT:  DEBUG: <--  Response 2:  0  (84ms),  headers:   body: (empty)
    Tue, 17 Mar 2015 15:35:30 GMT:  DEBUG: <---------------- Request in: /wm/preference-list-->1426606530328/1,httpStatus: 0,round trip time: 85ms, wmsid: null
    Tue, 17 Mar 2015 15:35:30 GMT:  ERROR: retrieveResponseError:
      ServerPreferencesDataSource.retrieveResponse
      error:-1/0
      guid:serverPrefsGuid
    Tue, 17 Mar 2015 15:35:30 GMT:  ERROR: Bootstrap error: Preferences.RefreshError
    TYPE
    server
    APP STATECHART
    SC.Statechart:sc1031
      initialized: true
      name: cloudos-statechart
      current-states: [
        active.application.displayingCurrentApp
      state-transition:
        active: false
        suspended: false
      handling-event: false
    BUILD NUMBER
    15B.169e9f7
    TIME
    Tue Mar 17 2015 11:35:32 GMT-0400 (EDT)        (1426606532298)
    HOST
    www.icloud.com
    USER AGENT
    Mozilla/5.0 (Macintosh; Intel Mac OS X 10_10_2) AppleWebKit/600.3.18 (KHTML, like Gecko) Version/8.0.3 Safari/600.3.18
    DSID
    1018646875
    ENVIRONMENT
    PROD
    RECENT LOG MESSAGES
    Tue, 17 Mar 2015 15:35:30 GMT:  DEBUG: MAIL in main()
    Tue, 17 Mar 2015 15:35:30 GMT:  DEBUG: Creating local CK.User object
    Tue, 17 Mar 2015 15:35:30 GMT:  DEBUG: Creating local CK.AccountPreferences object
    Tue, 17 Mar 2015 15:35:30 GMT:  DEBUG: -->  Request 1:   POST to https://p04-mailws.icloud.com:443/wm/preference?clientBuildNumber=15B.9bb3ce9&cl ientId=548F3122-7920-4BB0-8988-1F5BFD99D289&dsid=1018646875,  headers: Content-Type=text/plain,  body: (omitted)
    Tue, 17 Mar 2015 15:35:30 GMT:  DEBUG: ----------------> Request out: /wm/preference-list-->1426606530328/1
      wmsid: null
      params: {"locale":"en-us","timeZone":"US/Eastern"}
    Tue, 17 Mar 2015 15:35:30 GMT:  DEBUG: SC.Object:sc1473:dispatch('load content')
    Tue, 17 Mar 2015 15:35:30 GMT:  DEBUG: "2.0 Waiting for Content" handled event 'load content' (no transition)
    Tue, 17 Mar 2015 15:35:30 GMT:  DEBUG: SC.Object:sc2647:dispatch('noContent')
    Tue, 17 Mar 2015 15:35:30 GMT:  DEBUG:   "6.2 pop up View" handled event 'noContent' with a transition to "6.2.2 No Content"
    Tue, 17 Mar 2015 15:35:30 GMT:  DEBUG:     -> entering "6.2.2 No Content"
    Tue, 17 Mar 2015 15:35:30 GMT:  WARN:  REJECTING SERVER RESPONSE CoreMail.MailRequest.willReceive:
      Status:0
      Request:/wm/preference
      Wmsid:null
      Redirect Count:1
      Timeout Redirect Count:1
      ResponseText:
    Tue, 17 Mar 2015 15:35:30 GMT:  DEBUG: -->  Request 2:   POST to https://p04-mailws.icloud.com:443/wm/preference?clientBuildNumber=15B.9bb3ce9&cl ientId=548F3122-7920-4BB0-8988-1F5BFD99D289&dsid=1018646875,  headers: Content-Type=text/plain,  body: (omitted)
    Tue, 17 Mar 2015 15:35:30 GMT:  DEBUG: ----------------> Request out: /wm/preference-list-->1426606530328/1
      wmsid: null
      params: {"locale":"en-us","timeZone":"US/Eastern"}
    Tue, 17 Mar 2015 15:35:30 GMT:  ERROR: GIVING UP ON RETRIES, CoreMail.MailRequest.willReceive:
    responseText: ,
    this._redirectCount: 1
    Tue, 17 Mar 2015 15:35:30 GMT:  DEBUG: <--  Response 2:  0  (84ms),  headers:   body: (empty)
    Tue, 17 Mar 2015 15:35:30 GMT:  DEBUG: <---------------- Request in: /wm/preference-list-->1426606530328/1,httpStatus: 0,round trip time: 85ms, wmsid: null
    Tue, 17 Mar 2015 15:35:30 GMT:  ERROR: retrieveResponseError:
      ServerPreferencesDataSource.retrieveResponse
      error:-1/0
      guid:serverPrefsGuid
    Tue, 17 Mar 2015 15:35:30 GMT:  ERROR: Bootstrap error: Preferences.RefreshError

Maybe you are looking for