Classic getting hung-up

Also when I am writing a text message and I need infor from someplace else eg: the calandar or the internet and I go through the browser, I sae the text so I can come back to it, but when I do it gets hung-up and freezes. It sometimes takes 3 to 5 min and will unfreeze, other times it gives me the "failed to save message" error and i have to do it all again.
Thanks again

I'm having same problem
My beloved ipod classic was stolen last month. Just replaced it with a new (used) ipod 7th gen 160G. I'm on a MBP, latest version of Itunes (mistake). Music syncs fine. Some of the podcasts (my favorites) are not even showing up in the summary, so that I could attempt to sync them, but they are still there in itunes.
Any suggestions .. thank you!

Similar Messages

Upgraded to tiger, mail gets hung up on importing old messages.

I had my pwrbk tuned up and upgraded to Tiger. All files were swept onto a dvd for back up and just plopped back on again after the install. When I click on mail to 'mail' it wants to import my "existing Mail messages into the new version"... so I 'continue' as it requests and (sighhh) it procedes to import (sighhh) my 4500 or so (who's counting) messages. It gets hung up on #1363 (which I believe is in the 'sent' folder) and the time remaining keeps increasing...- I mean - I gave it a chance - the battery (brand spank me new) ran all the way down AND we plugged it in too ... it happens every time. How to bypass this import without deleting all my old emails and just excise the offending hanger-upper?

The conversion from Mail 1.x to Mail 2.x is broken. Even if Mail didn’t freeze while importing, there is no guarantee that it would import the old mailboxes successfully. Take a look at the following thread for an example:
Just upgraded, Most of my old Inbox is gone!
You could apply the procedure described there to the mailboxes that Mail appears to be choking on. Alternatively, you could move the entire account folder out of ~/Library/Mail/ (to the Desktop) and manually import its mailboxes afterwards as Other.

Gets hung up on importing iphoto library

when i try to import my iphoto library aperture gets hung up and the photos do not appear in the aperture library

The conversion from Mail 1.x to Mail 2.x is broken. Even if Mail didn’t freeze while importing, there is no guarantee that it would import the old mailboxes successfully. Take a look at the following thread for an example:
Just upgraded, Most of my old Inbox is gone!
You could apply the procedure described there to the mailboxes that Mail appears to be choking on. Alternatively, you could move the entire account folder out of ~/Library/Mail/ (to the Desktop) and manually import its mailboxes afterwards as Other.

I am having problems with the Preview application. When I try to use it to open a pdf document it gets hung-up and I have to select force quit to close it. Any ideas on how to resolve this problem? Thanks for any help

I am having problems with the Preview application. When I try to use it to open a pdf document it gets hung-up and I have to select force quit to close it. Any ideas on how to resolve this problem? Thanks for any help

Can you open the Preview program without loading a file, like by itself?
If it doesn't load then I suspect a corrupt Preview preference file.
Deleting the System Preference or other .plist file
Can you open other files with Preview, like jpg's and images?
How about other PDFs? or is it just that one you have downloaded?
Run through this list of fixes
Step by Step to fix your Mac

I have the latest version of Itunes downloaded and installed to my computer. I have a music library already created for my replaced Ipod Nano. I've just purchased a new Nano. When I try to access the Itunes store from the Itunes program, it gets hung u

I have tried uninstalling and reinstalling Itunes, but it still gets hung up when trying to access the Itunes Store from the Itunes program.
I've been unable to register the new Nano or sync it with my library.

Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

Google contact sync gets hung since 4.4.2 OTA android update

My S4 stopped completing Google contact syncs after the last Android update. All other Google tools complete the sync (App Data, Calendar, Drive, Gmail, etc), but the little arrow circle next to Sync Contacts stops spinning and gets hung. At the bottom of the screen, the Cancel Sync button stays on indefinitely.
Eventually, this error message shows:
"Sync is currently experiencing problems. It will be back shortly."
I've force stopped and Cleared Data on the "Contacts Storage" in Application Manager.
I've removed and re-added the Google account.
I've done a factory reset.
I've done multiple combinations of the above 3.
Can you get me a quick fix, put me on a beta Lolipop, or revert me back to the previous stable build of Android?

I'm sorry you can't sync your e-mail accounts with your Galaxy since the update CoolGeorge. I would be extremely frustrated if my accounts weren't syncing. Let's get this fixed. When did you get the update on your phone? Do other apps sync on the phone? (Such as Facebook, Twitter, etc.) Please try removing the accounts from your phone, clear the memory, http://bit.ly/R0eeM7 , then restart the phone. Once this is completed, turn phone back on, download the accounts again, and try to sync. Let's see if this helps. Please keep us posted.
Thank you,
VanessaS_VZW
Follow us on Twitter @VZWSupport

Whenever I try to sync my ipod touch, it doesn't work. The computer seems to get hung. What could be happening?

Whenever I try to sync my ipod touch, it doesn't work. The computer seems to get hung during the back up stage. It says it is backing up the ipod but nothing happens, for hours. I eventually have to interrupt it and give up.

I have the latest itunes.
I tried resetting sync history.
For this section:
If the issue persists, and you know all your contacts, calendars, bookmarks and notes are on your iPhone, iPad, or iPod touch:
Remove all of the contact and calendar information from Outlook.
Select the device in iTunes and click the Info tab.
Scroll down to the Advanced section, and under "Replace information on this iPhone/iPad/iPod touch" make sure Contacts and Calendars are not selected.
Click Apply.
This doesn't seem to make sense for my situation. I don't sync anything between outlook and my ipod touch.
I have no other USB devices connected to my computer.
I have no other Windows users on my computer - only me and I am the administrator. However on my diagnostic, it said this user is not the administrator. Weird.
So I have tried to follow that you referred me to, but still I haven't got it working yet. Do you have any further suggestions?

Why does RH 9 project get hung up in trial version?

Hi all,
I've been using RoboHelp 9 HTML and Internet Explorer 7 with no problems. However, our department is upgrading to IE 8 soon and asked that I test its compatibility with a trial version of RH 9 (on a different machine). When I opened up my existing project in the trial version, I experienced hang ups and had to close out several times due to a "not responding" status. I had similar problems when updating linked Word docs and viewing the primary layout. When I started a "blank" project, the response time was very fast and everything was smoother. I'm not sure if this is related to IE 8 or not. Any thoughts on why it would get hung up on my existing project?
Thanks!

Hi there
Where is the existing project located? If you say it's on a network drive, that's likely the cause. But if it's on a local C drive, odds are something else is afoot. Is source control involved?
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

TS2296 Safari (Version 7.0.1 (9537.73.11)) gets hung with Yahoo

Frequently Safari (Version 7.0.1 (9537.73.11)) gets hung while trying to load a section of the Yahoo home page. It never recovers spontaniously. Using Quit from the File menu closes the window, but the icon in the dock shows that it is still running. Using Force Quit, the Safari icon in the dock returns to normal. Shut Down also hangs, and the only way to turn off the MacBook Pro is to hold down the start button.

Your problem is different from those in the links provided:
       0x144e93000 -        0x144f0bfe7 +librooksbas.dylib (1) <0F0DD319-B485-842C-5364-7E033365C613> /Library/Rapport/*/librooksbas.dylib
       0x144f44000 -        0x144f50ff7 +librooksmce.dylib (1) <907A56FA-5FA5-3ECA-7F8D-4337B826524D> /Library/Rapport/*/librooksmce.dylib
       0x145100000 -        0x145127fff +RapportDaishi.dylib (1) <3186C415-CFA4-35F8-8948-6252C5F9E8E3> /Library/Rapport/*/RapportDaishi.dylib
       0x145143000 -        0x1451b5fe7 +trf.dylib (1) <86A60C92-55A7-48F6-34C2-08F6258505E4> /Library/Rapport/*/trf.dylib
       0x1451f6000 -        0x1454a7ff7 +RapportUtil1.dylib (1) <36C3C051-F51B-521B-AF4F-090B6BBBCF7F> /Library/Rapport/*/RapportUtil1.dylib
    0x7fff607c2000 -     0x7fff607f5817 dyld (239.3) <D1DFCF3F-0B0C-332A-BCC0-87A851B570FF> /usr/lib/dyld
You have Rapport banking software installed. In spite of efforts by its developers, it remains incompatible with Safari. You must remove it. Instructions here:
http://www.trusteer.com/support/uninstalling-rapport-mac-os-x

Some songs in my Ipod classic get get off after a few seconds of playing, but they work fine in ITunes and other Ipods. I have reset the classic several times and same issue happens, any ideas?

Some songs in my Ipod classic get get off after a few seconds of playing, but they work fine in ITunes and other Ipods. I have reset the classic several times and same issue happens, any ideas?

I have that exact same problem! It plays albums fine. But individual songs including ones downloaded from iTunes either skip or play the music of another totally different song. All play fine on iTunes and my iPhone... Got this one to replace my dying 5th gen classic.
I hope there is a fix for this, cause it *****!!!!

Why does the export pdf for word conversion get hung up?

I need to convert pdf file to Word 97-2003. When I follow all the steps it moves into the uploading file stage and then gets hung up and doesn't finish download. Blue down load file indicator stays on but download doesn't happen.

I am doing it from my home computer. I pay a yearly service fee for that
option and it's frustrating that I cannot access it, even though I could
before.
On Tue, Apr 30, 2013 at 2:07 AM, David Kastendick

What would make my Cp7 course get hung up during the loading process when launching on LMS?

In Cp7, I created a SCORM project to post on our LMS and submitted it for testing. Our LMS department confirmed it worked successfully, and in fact I tested it myself – it worked great. However, my work team asked me to make some changes to the content before pushing it out of the testing phase to launch company-wide. Per company policy, making changes to a course means resubmitting it once more to be tested before making it available to everybody. So I made the requested changes and resubmitted it for testing. Now our LMS department reports the course will not launch properly – it gets stuck in the loading process. It shows “Loading...” endlessly but never loads.
When I submitted the updated version for testing, I kept all the project settings that worked successfully the first time. The changes I made to the project were:
I added a slide toward the beginning (slide 2) to give the user navigation tips.
I set slides so that each one must play all the way through before the user can proceed to the next slide (I think I did this simply by removing “play” on the playbar”).
Under table of contents settings, I checked “navigate visited slides only,” so the user can navigate backwards using the contents bar at left, but can only navigate forward to slides that have already played or to the next slide in the queue.
I broke up a couple of lengthy multiple choice questions into shorter ones (for an additional two slides).
Is there any reason one of these changes would make the course get hung up during loading?
Is there a size limit Cp7 projects which, if exceeded, might be causing such an issue?
Or does anyone have ideas about what else might be making it get hung up in the loading process?
Thank you, any and all, for your feedback.

back up the iPhoto library like any other backup - make a copy of the iPhoto library in case of problems
you Depress the option (alt) and command keys and launch iPhoto - anyplace you can launch iPhoto you do this - keep the keys down until you get the rebuild window
LN

Safari gets "hung up"

Hello. I am running Safari Version 2.0.4 (419.3) on an intel iMac ( OSX 10.4.10).
When loading webpages Safari seems to get "hung up" right before finishing loading the webpage. The bottom of the screen will show something like "41 of 42 items completed" It always seems to just hang there waiting for the last item to load. This also causes some webpages to just sit there and you have to reload them to get Safari moving along.
Any help would be greatly appreciated. Thank you.

I'm having the same problem on my Macbook Pro. But I don't think it is limited to Safari. Seems to be everything program to access the internet will hang for 30-45 seconds including Firefox and Widgets. It doesn't happen on my PPC Mac Mini with same version of Safari. Only difference I can think of is that the mini is hardwired to the router and the MacBook is on WIFI. I don't think it is my service or WIFI router, because I am not having problems on my Dell laptop via WIFI. I've tried watching the Console during these seisures, but no messages appear. I'm going to try finding a cord long enough to connect into my MacBook to see if the problems go away. Any other ideas?

Lightroom (4.1 and now 4.2) getting hung up opening catalogs

Ever since I upgraded to 4.1, Lightroom has been often unable to get past opening up a catalog. I use Windows 7 64 bit and have 12 GB RAM and several TB of HDD space. While I never had the lag time issues others complained of until recently, getting Lightroom 4 to work well has been a horendous chore. I can start 4.1 in a reasonable amount of time while in safemode, but back in full Windows mode, with all appropriate drivers running, Lightroom will open a catalog and essentially get stuck. I have to resort to shutting down, restarting in safe node, starting up a catalog in LR, optimizing it, and try again when I return to normal window
I've figured that it was a driver using resources, and when I paused a process being run for my OKI printer, (a new network printer and the last one added before the software became constipated), and voila, the program is back to its reliable and fast starting self. Since I only use that printer rarely from this computer, I've decided to live with this work aroud. I use StartEd Pro to alter my startup and system processes, so its not that difficult to do. I hopedthat I've truly found the glitch., but no.
Using task manager and looking at the wait chain, i.e., what lightroom is waiting for and getting hung upon is SVCHOST.exe (RPCSS).
As before, safe mode allows me to open Lightroom properly and open the catalog. I also tried siagnostic startup and selective startup to no avail. I did get Lightroom to work briefly and was ableto update from 4.1 to 4.2, hoping that this would alleviate the problem - but of course, it hasn't.
Lightroom is critical to my whale and seal photo-id work and I need to get it up and running again. Please help!
Artie

Ian,
Thanks, I'll look into thagt. In the meantime I tried something a bit different. I started a new catalog as a test and it opened fine. I then imported one of my previous catalogs (a small one) and it imported fine, will all metadata intact, and opened fine as well.
I tried this again with my large catalog (26000+ images) and got an error message stating that the catalog hadn't been closed properly or was being used... UGH. I went back to safe mode and opened that catalog, optimized it, backed it up and will try again later, particulartly if I can't fix the SVCHost issue.
Right now, it's back to being a professor and grading student papers (alsmost as distrurbing sometimes as having to fiddle with Lightroom).
Artie

Movie clips get hung up when viewing project

I have not worked on my imovie projects for a while but after creating a new project and using the 30fps the yellow numbers in the clips disappear and I can view the project. However, now clips keep getting "hung up". Movie plays and the audio (from i-tunes music) plays on while individual clips keep getting stuck for a couple of seconds before carrying on or jumping part of the next clips. Have tried detaching audio from the the clip but no change. Does anyone have an idea what this could be and how to solve it. Have posted this question in the frame rate problem section as well.

Hi there
Where is the existing project located? If you say it's on a network drive, that's likely the cause. But if it's on a local C drive, odds are something else is afoot. Is source control involved?
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Classic getting hung-up

Similar Messages

Maybe you are looking for