Classic installed but non-functional

I have the Dual core Intel Mac Pro running 10.4.11. When I set it up with Migration assistant, it copied a classic system folder, but all my classic apps are greyed out and attempts to start classic fail. I have a couple of programs I still need access to. How can I get classic working on this machine?
Thanks in advance,
Jeff

Classic won't work on Intel macs. The best you can do is Sheepshaver but it is really troublesome to set up.

Similar Messages

  • I have a 60G classic with a non-functioning center select button. Can I set a specific playlist and change settings by hooking up to my PC and then maintain those settings and that playlist once I go remote?

    I have a 60G classic with a non-functioning center select button. Can I set a specific playlist and change settings by hooking up to my PC and then maintain those settings and that playlist once I go remote?

    I'm having a little trouble understanding the part about your password having to be reset. Why is that happening??
    Let's start with Firefox's settings:
    (1) You can configure the password manager feature on this tab:
    orange Firefox button (or Tools menu) > Options > Security
    There is a checkbox to enable/disable the feature.
    There also is a "Saved Passwords" button to review and remove any passwords you do not want Firefox to keep.
    That tab also has a feature to set a Master Password so that no one can use your saved passwords without knowing the Master Password. You may need to exit Firefox in order for Firefox to ask for that again.
    Related articles:
    * [[Password manager - Remember, delete and change saved passwords in Firefox]]
    * [[Use a Master Password to protect stored logins and passwords]]
    (2) Site-specific permissions
    If you want to use the password manager for other sites but NOT a particular site, you can configure that in the Permissions Manager.
    In a new tab, type or paste '''about:permissions''' in the address bar and press Enter.
    After the page loads, use the search box in the upper left corner to narrow down the list to the site you want to configure. Highlight the site on the left side, and on the right side, choose Block under Store Passwords.
    (3) Form autocomplete suggestions
    Separate from passwords, Firefox remembers entries you've made into forms (in most cases) and lists the matching ones below the form field in a drop-down.
    To clear a suggestion, press the down arrow key to highlight it and press the Delete key.
    To turn off this feature, see this article: [[Control whether Firefox automatically fills in forms with your information]].
    To review and selectively edit or delete form history entries, you need an add-on. For example, you could try this one: https://addons.mozilla.org/firefox/addon/form-history-control/

  • I cannot turn on the wifi for my 4g. The button is visible but non functional. suggestions?

    I cannot turn on the wifi for my 4G. The button is visible but non functional. Suggestions?

    Hello! Does the wifi button look greyed out? Here is a link regarding this issue: http://support.apple.com/kb/ts1559
    What you will need to do is to first to reset network settings by going to Settings>General>Reset>Reset Network Settings, NOTE: When you do this all bluetooth/wifi passwords will be forgotten. If the issue persists then we need to do a simple backup and restore.
    Follow http://support.apple.com/kb/ht1766 and http://support.apple.com/kb/ht1414 on how to backup and restore, when you restore please restore as new, do not restore the backup just yet if the Wifi is greyed out then there is a hardware issue and the device needs to be serviced. Please check your local Apple Store or call into Apple regarding service options and warranty status. Hope this helps!

  • Power Button only works at startup, but non-functional afterwards.

    For a Macbook Pro 15
    A1226 / OS 10.6.8 / 2.2GHz Intel Core 2 Duo
    (1) When the computer is on, and i press the power button , the shutdown menu used to come on, but does not now.
    (2) When i press & hold the power button, the computer does not force shutdown, even when i hold it down for 30 seconds.
    (3) When I shutdown the computer via the apple menu, i cannot start the computer up using the power button
    (4) However, disconnecting the trackpad ribbon cable from the logic board, then reconnecting, the power button is operational allowing the computer to start back up
    (5)When I put the computer to sleep via the apple menu, it goes to sleep, and i can wake it up
    (6) When I restart via the apple menu, it powers down then restarts without any problems
    (7)The force quit keyboard short cut will not work most likely in that it uses the power button as a shortcut.
    So pursuant, to (4) above, it seems that the power button is non-functional after starting it up, and will only work after connecting/reconnecting the ribbon cable
    Bracing myself for no replies or "take it to the genius bar"

    Try resetting the  SMC http://support.apple.com/kb/ht3964

  • Macbook says to select disk to install but none appear

    Ok, I just got a used macbook that needs the install disk that I ordered from apple. I just put it in, the setup seemed to be fine (select language etc) but now it wants me to select the disk wher you want to install mac os x but no choices appear in the menu. The disk is in the computer obviously. Help!

    Or maybe the harddisk needs a bit pf prepping:
    From the Top Menu - Utilities start Disk Utility.
    After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    Stefan
    (part of this post is courtesy of Kappy)

  • App Store indicates new iWork is installed, but it isn't

    Hi all,
    I had iWork '09 installed prior to updating to OS X Mavericks. After updating to OS X Mavericks, I went to the Mac App Store to update the iWork apps. The install seemed to go fine, but afterwords the iWork apps weren't in my Mac's apps folder but the Mac App Store did indicate that the new iWork apps were installed.
    I did some research online and found potential solutions, but none of those worked: rebooting my Mac, uninstalling and reinstalling the iWork apps, creating a new admin account and trying to install the new iWork apps from that account, trying to install the new iWork apps from the Guest account, and using Cocktail to clear all my caches. The Mac App Store still indicates that the new iWork apps are installed, but none of them are in my apps folder.
    I'm at a loss as to what to do next. If anyone has encountered a similar situation and resolved it successfully, I'd really appreciate it if you could post here what worked for you so I can try that.
    Thanks,
    Nikolaus

    I found the reason I couldn't originally find the newly installed iWork apps was because they were installed on external drives which just happened to have folders named "Applications". Spotlight found them, I added them to my dock, right clicked on the iWork apps and chose the "Show in Finder" option. Two of the iWork apps were on one external drive and the other was on another external drive. I ended up just dragging them to my MacBook Pro's hard drive and deleting the ones on the external drives.

  • I have a PowerBook G4 with a non-functioning monitor.  It used to work with an external monitor, but I reinstalled the OS, which cleared the display preferences and now when I restart it won't detect the external monitor. How do I fix?

    I have a PowerBook G4 with a non-functioning monitor.  It used to work with an external monitor, but I reinstalled the OS, which cleared the display preferences and now when I restart it won't detect the external monitor. This means I can't use the computer anymore. How do I fix? I tried using the Command+F2 keyboard shortcut, but it doesnt' work.  It's possible that since I reinstalled the OS, it still needs to be set up, so there's only a welcome screen (but since I can't see it I'm not sure).

    There is no limit to the number of times you can re-install Office on the same computer.
    You can activate by telephone:
    The last paragraph is the relevant bit

  • Dashboard has stopped working. The application will open, but none of the widgets will function. I've deleted widgets

    Dashboard has stopped working. The App will open, but none of the widgets will function. I've deleted widgets & added new ones, but they also will not work.

    I get the "License has stopped working" mesages too.
    We have a MacbookPro at home. There are two user-acounts on this mac, one for my wife and one for myself. This way we keep our personal stuff (e-mail, files, settings, dropbox, desktop clutter etc) separated. "Fast user switching" is enabled to easily switch to your personal account.
    Now when I open Photoshop I might get the dreaded "License has stopped working" message. This will happen if Photoshop is left open in her account. So I'll have to log into her account, close Photoshop, go back into my own acount and open Photoshop again.
    I should not get this message since Photoshop is not part of a particular user account, it is installed in the "Applications" folder which is accesible to all users.
    What makes it even more annoying is that I get the "License has stopped working" message on trying to open Photoshop even when Photoshop is closed in in the other acount, but Illustrator is opened.
    This makes no sense since we bought Photoshop and Illustrator CS3 as separate programs, not as a part of the Creative Suite.
    I did not report this to Adobe yet but it wil do that now.

  • Install classic on a Non-OS X iMac - run on new PB?

    Hello!
    I have reciently been messing with my old iMac G3 DV (192ram, 60GB, 400mhz, 9.2.2), and am curious about running it in target mode.
    I currently have Classic installed on my 15" PB, running 10.4.4, and it works fine. However, i'm running out of hard disk space, and would like to remove classic, and my old OS 9 apps to save room.
    I have my iMac connected to my power book via FireWire target mode, and can run software stored on my iMac's hard drive on Classic in my PB. Is it possible, to install classic on my imac, or (preferably) use 9.2.2 already on my iMac, to run classic apps? for ease of switching input/output devices, i'd like to be able to at least display them on my PB.
    I guess what i'm asking is if i can use the iMac like a HD , and run OS 9 directly off of it, kinda like booting OS X via FireWire hard drive.
    Is this possible, or am i just daydreaming?
    -Dan

    To answer:
    No, not at the time. When it crashed, I was using the IMac as an iMac. That's how I usually do it.
    What exactly is a TDM link, anyway?
    Oops, TCP/IP Control panel.
    About iMovie - Most go to the 120. I keep some of the compressed MPEG-4s on my main, but usually they're on the external. When I'm working on movie in DV, however, I sometimes have to keep it on the main - it slows down if you have too many clips - can't transfer quick enough via USB, I guess.
    It's not as much of a challenge as you think - I've got 50 G used right now.
    around 1.6G go to the system, (folder), 6Gig for applications, around 9G for application support (when they say 10G for iLife 06, they're not kidding! - it's mostly themes, Garageband loops, and other doodads). Then there's 1.5 for the developer tools, ~3G for documents, (~2.5 of which is Virtual PC) 7 Gig for iPhoto (when I only have 5 G of photos - hm...), 15.5 G of music, another 3 G for the library. Who knew that backup had a 500 MB cache? There's 800 Meg of emails (and attachments - soon to be deleted!), and more garageband loops... O.o
    It goes quick!
    About the PB locations: Yep, I try to find spots with power too. However, I'm on a college campus - walking 4-5 miles a day. It's also 100 degrees today - HDD's don't like that, or the shaking. When I do find a spot, it's usually in the library, student union, or food court. None are good places for an extra HDD.
    In any case, I don't need the HDD during most days - I'm at school, after all - but its nice to be able to work on iMovie during my off time at lunch monday (2 hours! :D) That's why my old Clickwheel is so useful - it carries most of my current projects around - and enough music for the walk - and is very portable.
    It's not a lot of things that don't work - most do - particularly the assigned sites. However, the discs that come with new text books don't usually work with Mac. Ran into that trouble while doing practice exercises...
    -Dan
    15" Powerbook G4 (May 2005 ed), iMac DV (9.2.2)   Mac OS X (10.4.6)   1G Ram, 192 (iMac)

  • Setting up a new TC.  Everything went fine.  I was able to connect a macbook air, 2 ipads, an Iphone 6, and even a windows 7 PC.  All devices showed a complete and functioning internet connection, but none of the devices could access the internet.

    I am trying to set up internet connection to my home using a 3gig Airport time capsule as a router.  I unplugged the cable from the existing router, and plugged it into the ethernet port of the TC.  The TC fired up found tttttttthe internet connection, and glowed green.  I set up the password, and all, and was then able to connect a Windows 7 PC, 2 ipads, and iphone 6, and a macbbook air, all running the most current os.  All devices connect with the internet via the Airport device.  they all say that there is a fully functioning internet connection, but none of them can actually connect to the internet.  When I run a speed test via OKLA I am told that the test failed to innatiate.When I try to do a search I get an error message that the page cannot open because safari cannot make a secure connection to the server.
    Any suggestions?

    Inside the house I have what looks like a phone cable that is plugged into a power supply, and into a router.
    What is this router?? Is it the TC or a router supplied by the ISP?
    It will depend on how the system works.. but the instructions from skybeam are fairly simple.. you just setup a router with dhcp set on the WAN port for connection.
    On the airport utility open your TC by clicking it then clicking edit.
    Make sure the WAN is set correctly and the ISP ethernet cable is plugged into it.
    And make sure Network is set to DHCP and NAT.
    Please give me the screenshots of the same things from your setup.

  • I have just installed Lightroom 5-7 on my new PC laptop but none of the photos I am working on are there, what do I do to get them from my old laptop also a PC

    Hi
    I just bought a new PC laptop and installed Lightroom 5.7 on the new one but none of the photos that are in Lightroom on my old PC computer are on the new one.
    I have several photos that I am working on in the old computer which is dying and not very reliable any more.
    How do I find the photos on my old computer and get them into Lightroom on my new computer?

    You would need the catalog and the images from the old computer if you want your work that you have done previously. You will have to copy the images and the catalog from your old computer to the new one. Don't you know where you imported images to?

  • I just installed Icloud on my Iphone and PC (all versions as required) I checked mail, caledar and task. Outlook shows an Icloud calendar but none of the events that are on my phone calendar. Email is not syncing from phone to pc either. What do i do?

    I just installed Icloud on my Iphone and PC (all versions of updates as required). I checked mail, calendar and tasks to be synced.The Outlook calendar shows an I cloud calendar but none of the events on my phone calendar. Email from the phonre and pc are not syncinh wither. The phone shows an Icloud inbox. What do I do to get items to sync?.

    deltajane wrote:
    My iphone4 and my ipad mini were synced to my computer, but now I don't seem to be able to see all of my content nor my photo stream.  I did see everything there several weeks ago, so I know it worked. How do I access those from my computer.  I can't find how to sign on. 
    This is the article that will assist with this part of your post:
    http://support.apple.com/kb/ht4486
    deltajane wrote:
    I signed on to iCloud, but it only shows the icons for Mail, Contacts, Calendar, Notes, Reminders, Find Phone, Numbers, Pages and Keynotes. Where's everything else ?
    What you've outlined in this part of the post is all that icloud stores for you outside of the backup. If you want to restore from the icloud backup you will then have for all practical purposes a carbon restoration back to your device if you restore from the icloud backup.
    deltajane wrote:
    I want to delete photos that are on my iphone, by doing so from the computer, not my phone.
    Syncing your device with itunes will then enable you to remove whatever photos you wish to remove from your device deleting them with the computer and not the iphone.

  • I'm using a 15" Macbook Pro running OSX6.8 and cannot upgrade. I have a subscription to Adobe CC but none of these work on this so I was on with Adobe for 5 hours trying to install and launch Illustrator, InDesign, Photoshop, Muse, and Acrobat Pro from CS

    I'm using a 15" Macbook Pro running OSX6.8 and cannot upgrade. I have a subscription to Adobe CC but none of these work on this so I was on with Adobe for 5 hours trying to install and launch Illustrator, InDesign, Photoshop, Muse, and Acrobat Pro from CS6. Well, InDesign is the only one that works and I have a ton of work due! I don't have a serial number for Photoshop or Illustrator except for CS3, and they don't work. InDesign gave me no problems. Illustrator says it can't work on this machine. Photoshop needs a serial number. I'm stumped and getting anxious and freaked out. Can anyone help? Adobe Chat is down right now.

    if you have a cc subscription, close ps > sign out and then back in to your cc desktop > open ps.
    ai cs6 requires:
    Multicore Intel processor with 64-bit support
    Mac OS X v10.6.8 or v10.7. Adobe Creative Suite 5, CS5.5, and CS6 applications support Mac OS X v10.8 and v10.9 when installed on Intel-based systems.*
    2 GB of RAM (8 GB recommended)
    2 GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
    1024 x 768 display (1280 x 800 recommended) with 16-bit video card

  • I have a sony laptop with windows 7 (64 bit) which I upgraded to windows 8 64 bit. But the machine had to be formatted and this time loaded windows 8 32 bit. Now I have tried itunes for 32bit win 8 as well as for 64bit win 8 but none is getting installed

    I have a sony laptop with window 7 64 bit initially which I upgraded to windows 8 64 bit. But due to formatting later, I had to reinstall the windows and this time I installed windows 8 32 bit. Now I have tried installing iTunes for 64 bit windows 8 as well as 32 bit Windows 8 but none of them is getting installed. The message I get is, "this programme is not compatible for your pc" (or words to that affect since I dont remember the exact words but this is the meaning).
    Can some body send me the link to the right file please. I need iTunes to transfer files from my iPod and iPhone to my laptop.
    Regards

    Hi there,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    -Griff W.

  • Have just installed Mavericks and restarted the MacBook Pro. That was 3 hours ago and after logging in, I got my wallpaper and dock, but none of my desktop icons, just the spinning coloured wheel. It's been like that for 2 hours. Is this normal? What shou

    Have just installed Mavericks and restarted the MacBook Pro. That was 3 hours ago and after logging in, I got my wallpaper and dock, but none of my desktop icons, just the spinning coloured wheel. It's been like that for 2 hours. Is this normal? What should I do, please?
    I tried holding the on/off switch down to make it shut down, but when I turned it back on again, the same thing happened and none of the keys etc makes any difference.
    HELP!!!! Please.

    No, what you're experiencing is not normal.
    Try booting whilst holding down the Shift key - this will allow you to boot into Safe Mode, disabling third-party kernel extensions, etc. Your Mac will be slow to boot and will operate sluggishly. That's normal. If you can get in using Safe Mode then you have some start-up item that doesn't play well with Mavericks.
    Call back,
    Clinton

Maybe you are looking for