Classic layout does not an available option to change on my mac mail 4.6 to fix my viewing to the old layout

"Classic layou"t is not an available option to change on my mac mail 4.6 to fix my viewing to the old layout

I just solved my problem based on the clues given by the 2 responses I recieved. I realized that I do indeed have Snow Leapord and it was as easy as grabbing the margin bar at the base of the mail display screen and locking the crosshairs on the bar and dragging it up to the north if you will and the bottom pane was then once again revealed. I guessing my kids mucked it up. Thanks for the support.
bdhenk - out

Similar Messages

Does anyone know why when i change a contacts number and then try to send them a message the old number still pops up??

Does anyone know why when I change a contacts number and then try to send them a message the old number pops up aswell??

The phone remembers recently used numbers just like how Mail remembers recently used email addresses. As time goes by the phone will eventually forget unused number that are not in your contacts as long as you do not use it. Same for unused email addresses that are not in your contacts.

HT1689 I have down. the new ITUNE,in the music library,it does not tell me how many pieces of music i have. I use to have it in the old version

Hi everybody. Since i have dowloaded the new version of ITUNE, when i down. new music in my library it does not tell me how many pieces of music i have in
the library. What is the solution. Thank you I have Windows 7

Ctrl B to show the top menu
View Show Status Bar and the grey bar will be back
Also View > Show Sidebar will make it look and act like itunes 10

Restrictions passcode does not wok anymore. If I restore factory settings and do a back up will it restore the old passcode? Hasn't been backed up in a while

The restriction passcode stopped working. I did not forget it. The iPad has not been backed up for a long time. If I back up then restore factory settings then restore backup will it still be restricted with the old passcode?

1) Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
2) If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download

Package org.jdesktop.layout does not exist?

I have created a project in Netbeans using the Java Project with Existing Ant Script and am trying to use the Netbeans GUI interface to develop my project, but even though I have created a folder that contains the swing-layout-1.0.3.jar and I no longer get the errors in my java file, I cannot built the project. I get the error: package org.jdesktop.layout does not exist.
In my java code, I can make an import statement, and Netbeans gives no errors. I can start typing "org. " and Netbeans suggests the classes, so clearly the org.jdesktop.layout does exist and is available to the code. So why am I getting this error, and how can I correct it?
Thanks in advance,
Chris Coulon

i could compile it properly by givin the path to the swing-layout-1.0.3.jar file in classpath. but i'm not able to run it now. i get the following error.
Exception in thread "main" java.lang.NoClassDefFoundError: CMSUI (wrong name: my
/cmsui/CMSUI)
at java.lang.ClassLoader.defineClass1(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:12
4)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:268)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
thanks

KE30 - Characteristic in layout does not appear description

Hi all,
I have a query on my KE30 report where by the description of the characteristic does not appear as selection in change layout for object list display. For example, charateristic "customer" only appear value but there is no field in the selection to appear the customer name. I've checked in KEA5 and ALL characteristics has been set as "Not assigned" in display option at 'further properties' work area.
Appreciate your assistance on this.

Hi
Once you have run the report in object list, click on the choose fields (the third last icon on the 3rd bar)
Select the text for each of the characteristics.
You can save the layout for future use
Hope this helps
Kind regards
Dawn

My Region (Thailand) is not an available option when registering my product

Two years after purchasing my X220 in my home country of Thailand I am still being pestered to register my product by Lenovo Solution Centre.
I try to do this but the first question is 'Which is your Region?'. Thailand (or SE Asia) is not an available option in the drop down box that accompanies this question. Which region should I mis-select?
I am sure I registered my product when I bought, but cannot remember how. Does the fact that Solution Centre informs me bottom left of the date when my warranty expires confirm that I have previously registered by another means? If so I will use the facility to turn off the error message about product registration and forget about it!
Solved!
Go to Solution.

Hi Steveunsworth,
I understand that your concern has been addressed, and you might have resolved the issue. Please feel free to post in Lenovo Community Forums if you have any further queries!
Did someone help you today? Press the star on the left to thank them with a Kudo!
Cheers!
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Keyboard layout does not matc keyboard issue

HI. After recovering control of my 10.5.8 Mac - lost admin password - I find my keyboard layout does not match my real one.
Actually it never did, I had to buy a new keyboard after original was damaged and the new one was for Snow Leopard systems, not my 10.5.
So there was a slight discrepancy already there but minor enough for me to not bother about changing it.
But now it,s way out of what it should be and this is difficult to write with punctuation.
Registration process to regain control after lost admin pass issue> chose - English - as language
My hard keyboard is spanish - slight difference only and which has never caused a headache
I have British English first, and Spanish second, as my preferred input languages.
In my KB input menu I have British, Spanish, and additionally entered Spanish ISO - *this was what I used before losing admin password, and also US English.
There is no Change Keyboard Option in sys prefs - kb and mouse pane.
There is no KB setup assistant.
I have tried various layouts with no luck.
I need to get back as close to possible as a normal layout, that is, all punctuation symbols must match where they are on the keyboard, e,g asterisk to asterisk, etc.
As far as I can tell the only difference with a normal English or US english keyboard is in addition of one extra letter - the n, with accent.
Thanks for any help

Apple Spanish keyboards should normally work right when you have chosen Spanish ISO in the "flag" menu at the top right of the screen. Could you tell us which keys are not correct when you do that?
If your keyboard does not match, one fix would be create a custom layout using
http://scripts.sil.org/ukelele
It's really pretty easy.

Nice to see 13" retina but it has only Intel HD Graphics 4000 and does not have NVIDIA GeForce GT 650M with 1GB of GDDR5 memory card. How it will affect the speed, performance and other things compared to 15" retina where NVIDIA GeForce card is available.

Nice to see 13" retina but it has only Intel HD Graphics 4000 and does not have NVIDIA GeForce GT 650M with 1GB of GDDR5 memory card. How it will affect the speed, performance and other things compared to 15" retina where NVIDIA GeForce card is available.

The 15" Retina's will have better performance than any 13" Retina. Not only do the 15" machines have dedicated GPU's, but they also have quad-core processors, whereas the 13" Retina's only have dual-core processors.

I have a late 2008 white macbook. I have a mini dvi to hdmi adapter, and a hdmi cord. My cannot get my MB to detect an external monitor. Nothing happens when plugged in. Also, my display settings does not have an option for mirroring or arrangment tab

I have a late 2008 white macbook. I have a mini dvi to hdmi adapter, and a hdmi cord. My cannot get my MB to detect an external monitor. Nothing happens when plugged in. Also, my display settings does not have an option for mirroring or arrangment tab

Yeah, I'm having the same exact problem - It seems that the thunderbolt minidisplay port is only able to output the analog VGA signal, not the digital signal to support DVI and HDMI. This is a bug that came up after installing 10.7.1. I bought my macbook air with 10.7 on it, upgraded it to 10.7.1 as soon as I got it, so I have never been able to use hdmi or dvi with my macbook air. This is an extremely frustrating problem for me, I used HDMI on a daily basis with my PC. I have spent many hours at the genius bar running diagnostic tests so Apple can get as much information as possible to create a fix for this problem. I have been emailing tech support for 3 or so weeks now, they keep saying that they are working on a fix and it should be out soon, but 10.7.2 has come and gone and I still have no HDMI functionality with my MacBook Air!

ITunes will not open and tells me to use the "information" to open in 32 bit rather than 64. but the information pane does not offer that option ...

I am trying to open my iTune 10.4 on my mac mini which is running OS 10.6.8, and I get the message that I need to use the information pane to open in 32-bit rather than 64. But the information pane does not offer this option. I'm in a vicious circle of opening, getting this message, then having to close. Did this come about after the June update of iTunes? And if so, why haven't they fixed it? And what can I do? You'd think Apple would want be to be able to spend my money in their store ...

Try following steps and test one at a time:
1. Restart computer, right mouse click iTunes icon and select "Run As Administrator"
2. If that does not work, check to see if this file APSDaemon.exe is the problem here.
Close your iTunes.
Press Ctrl-Alt-Del key and choose Task Manager. In the "Processes" Tab, select the file APSDaemon.exe and click End Prosses button, then close the task manager window.
Now open itunes and see if it is working?
If that works, to prevent having to do the same process everytime you restart Windows, go to. START button, type in
MSCONFIG
Hit ENTER
Click STARTUP Tab, Uncheck "Apple Push", click OK.
Restart Windows.
3. If that fails or you don't see ApsDaemon.exe in the Processes, refer to following article to remove SC files:
http://support.apple.com/kb/TS2363
4. If that fails, repair or reinstall your Quicktime. START / CONTROL PANEL / PROGRAMS N FEATURES / hightlight QUICKTIME and click REPAIR.

TS1369 After updating iTunes this week Windows 8 recognizes the iPod but does not offer an option to open with iTunes. iTunes does not recognize iPod Touch. Have followed all the steps but without success. Is there a solution with iTunes?

After updating iTunes this week Windows 8 recognizes the iPod but does not offer an option to open with iTunes. iTunes does not recognize iPod Touch. Have followed all the steps but without success. Is there a solution with iTunes?

I followed all the instructions on the suggested page. Many files in C:\Program Files\Common Files\Apple\ and C:\Program Files (x86)\Common Files\Apple\ could not be deleted. Message said ""Cannot delete files: It is being used by another person or program"' but could not find iPodService.exe in task manager (also, the "Cannont delete ... " did not mention iPodService.exe).
Deleted all that I could. Reinstalled iTunes. Still same result. iTunes and computer both recognize my old iPod. Only the computer recognizes iPod Touch.

In iTunes 11.1 (I26) , I cannot find how to delete podcast listings showing undownloaded podcasts. Delete does not work. Option Delete does not work. Dragging to the trash does not work. Under Edit, Delete is greyed out. Mac OS 10.6.8

in iTunes 11.1 (I26) , I cannot find how to delete podcast listings showing undownloaded podcasts. Delete does not work. Option Delete does not work. Dragging to the trash does not work. Under Edit, Delete is greyed out. Mac OS 10.6.8.
Tom at the Genius Bar told me that Option Delete would work. It does not.
I had to upgrade to iTunes 11.1.(I26) because it is required with OS7 on my iPod Touch (5th Gen). I have tried shutting down iTunes, then shutting down the entire system. This is the first in many visits that the Genius Bar gave me a solution that did not work.
This is a big awkward computer locked to my desk. I would rather not unlock it and then carry it through a shopping center to the Genius Bar if i can avoid oit.
When I installed iTunes 11.1, I discovered that Ihad to resubscribe to virtually all of the podcasts that I had previously been subscribed to. That was a surprise.

Hello Achates:
I did not read the rather long post. If you wish to reinstall OS X 10.4, use your software install DVD. Backup is essential. To minimize your risk, I would use an archive and install:
http://docs.info.apple.com/article.html?artnum=107120
In that way, you will have a fresh copy of OS X and your current settings will be preserved.
Incidentally, I do not agree that the printer problem is best solved by reinstalling OS X. I have had HP printers for sometime and, on one occasion, had difficulty after an upgrade. HP technical support walked me through uninstalling all traces of the HP driver and then reinstalling.
Barry

Netbeans 5.0 beta: package org.jdesktop.layout does not exist

This is a newbie question. I'm running netbeans 5.0 beta and put together a UI with the nice UI builder in netbeans. When I go to compile I get "package org.jdesktop.layout does not exist". I've updated my class path via the netbeans libaryar manager to include the jars swing-layout-0.7.jar and org-jdesktop-layout.jar but it is still not finding the class. What am I missing? Thanks!

Do you get this error when selecting "run" from within NetBeans?
When I create a project using Netbeans 5.0 beta using the form designer NetBeans automatically adds swing-layout-0.7.jar to the list of libraries in the libraries node in the project window. I didn't do anything fancy.
Do you get this error if you create another project?
it works fine for me.

Does not appear lock option to cover the ipad2 with operational 5.01

Does not appear lock option to cover the ipad2 with operational 5.01

Did this with Adobe support in LIVE CHAT, what a waist of time. Although this will correct the issue, it is like a work around and not solving why EDIT IN PHOTOSHOP... is not a clickable option (greyed out) in LR.
After the configure as suggested above, does this preclude and editing in Lighroom?
What I want to do is:
Edit the photo in LR except for:
the useage the great Spot Healing Brush Tool that PSE offers, edit that part of it in PSE then SAVE the results back to LR. Any problems or suggestions for this?
Thanks so much

Classic layout does not an available option to change on my mac mail 4.6 to fix my viewing to the old layout

Similar Messages

Maybe you are looking for