Classic Planning application Error during Setup

What is the SQL Command to FIX THIS ERROR
no privileges on tablespace 'USERS'
Unable to create Schema for application. Exiting Application Creation.
Please advise

Log into SQLPLUS
GRANT UNLIMITED TABLESPACE TO <username>;
e.g.
GRANT UNLIMITED TABLESPACE TO planapp;
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

Microsoft sharepoint foundation 2010 encountered an error during setup. One or more required Office components failed to complete successfully

Dear
I need yourhelp, I am installing Sharepoint foundation 2010 prerequisites OK,
then to finish the installation get the following message"microsoft
sharepoint foundation 2010 Encountered an error during setup. One or more required components failed to Office complete successfully"
Operating System: Windows Server 2012R2
Prerequisites: OK
SharepointFoundation 2010sp2
Many thanksforyour help
part of LOG:
01/16/2015 00:37:11 1 INF Searching for registry key Software\Microsoft\Shared Tools\Web Server Extensions\14.0\WSS\CentralAdministrationURL
01/16/2015 00:37:11 1 INF Entering function RegistryHelper.RegistryHelper
01/16/2015 00:37:11 1 INF The RegistryHelper has the key name as Software\Microsoft\Shared Tools\Web Server Extensions\14.0\WSS and the registry hive as LocalMachine
01/16/2015 00:37:11 1 INF Leaving function RegistryHelper.RegistryHelper
01/16/2015 00:37:11 1 INF Entering function RegistryHelper.GetStringValue
01/16/2015 00:37:11 1 INF Entering function RegistryHelper.GetValue
01/16/2015 00:37:11 1 INF Leaving function RegistryHelper.GetValue
01/16/2015 00:37:11 1 INF Leaving function RegistryHelper.GetStringValue
01/16/2015 00:37:11 1 INF The central admin registry name CentralAdministrationURL at HKEY_LOCAL_MACHINE\Software\Microsoft\Shared Tools\Web Server Extensions\14.0\WSS could not be found. This means that either
the server is not joined to a farm or a central admin site has not been created in the farm yet.
01/16/2015 00:37:11 1 INF Entering function StringResourceManager.GetResourceString
01/16/2015 00:37:11 1 INF Resource id to be retrieved is CantOpenCentralAdminSiteNotExists for language English (United States)
01/16/2015 00:37:11 1 INF Resource retrieved id CantOpenCentralAdminSiteNotExists is Cannot browse to the SharePoint Central Administration Web Application because a SharePoint Central Administration Web
Application has not been created yet. To create one, use the SharePoint Products Configuration Wizard. Do you want to launch the configuration wizard now?
01/16/2015 00:37:11 1 INF Leaving function StringResourceManager.GetResourceString
01/16/2015 00:37:11 1 INF Entering function PsconfigMessageBox.ShowMessageBox
01/16/2015 00:37:11 1 INF Entering function StringResourceManager.GetResourceString
01/16/2015 00:37:11 1 INF Resource id to be retrieved is Branding for language English (United States)
01/16/2015 00:37:11 1 INF Resource retrieved id Branding is SharePoint Products Configuration Wizard
01/16/2015 00:37:11 1 INF Leaving function StringResourceManager.GetResourceString
01/16/2015 00:37:23 1 INF Leaving function UserInterface.ShowCentralAdmin
01/16/2015 00:37:23 1 INF Leaving function UserInterface.WarmUp
01/16/2015 00:37:23 1 INF Entering function TaskDriver.Stop
01/16/2015 00:37:23 1 INF Entering function TaskDriver.OnTaskDriverStop
01/16/2015 00:37:23 1 INF Sending a task driver stop event: TaskDriverEventArgs.EventCriticalityType error, TaskDriverEventArgs.EventType.stop,
01/16/2015 00:37:23 1 INF Entering function TaskDriverStateChange.Enter
01/16/2015 00:37:23 1 INF Acquiring the writer lock to change the state
01/16/2015 00:37:23 1 INF Current state of the task driver is neverrun. You want to change it to stoppedrunning
01/16/2015 00:37:23 1 INF Changed state of the task driver to neverrun
01/16/2015 00:37:23 1 INF Released the writer lock to change the state
01/16/2015 00:37:23 1 INF Leaving function TaskDriverStateChange.Enter
01/16/2015 00:37:23 1 INF Entering function TaskDriver.FireOnTaskDriverEvent
01/16/2015 00:37:23 1 INF Entering function UserInterface.TaskDriverEventHandler
01/16/2015 00:37:23 1 INF Received a TaskDriverEventHandler: TaskDriverEventArgs.EventCriticalityType error, TaskDriverEventArgs.EventType stop, message
01/16/2015 00:37:23 1 INF There isn't a current visible user form or the current form is not handling events, so we will handle this task driver event
01/16/2015 00:37:23 1 INF Leaving function UserInterface.TaskDriverEventHandler
01/16/2015 00:37:23 1 INF Leaving function TaskDriver.FireOnTaskDriverEvent
01/16/2015 00:37:23 1 INF Leaving function TaskDriver.OnTaskDriverStop
01/16/2015 00:37:23 1 INF Leaving function TaskDriver.Stop
01/16/2015 00:37:23 1 INF UnLocking the task driver for exclusive use while warming the driver up
01/16/2015 00:37:23 1 INF Leaving function TaskDriver.WarmUp
01/16/2015 00:37:23 1 INF Entering function PsconfigApplicationContext.ClosePsconfigApplication
01/16/2015 00:37:23 1 INF The psconfig ui application is closing
01/16/2015 00:37:23 1 INF We have do not have a main form, thus the application has been told to close prior to showing the ui at all
01/16/2015 00:37:23 1 INF Leaving function PsconfigApplicationContext.ClosePsconfigApplication
01/16/2015 00:37:23 1 INF Return code indicates a success
01/16/2015 00:37:23 1 INF Leaving function PsconfigUserInterfaceMain.Main

Hi Jose,
When server 2012 will not allow pre-requisite to run, due to the ASP.NET 3.5 or 4.5, do this:
Run, from admin command prompt:
Dism /online /enable-feature /featurename:NetFx3 /All /Source:<drive>:\sources\sxs /LimitAccess
you can read more here:
http://www.sharepointpapa.com/blog/_layouts/15/start.aspx#/Lists/Posts/Post.aspx?ID=86
Stacy www.sharepointpapa.com

Microsoft office professional 2013 encountered an error during setup

Trying to install the 32 bit version of Office 2013. Planning to keep all my old versions. I have Access 2002 and 2003 that I need. Was not installing Outlook 2013 as Outlook 2010 is the only Office app that I care if I have issues with
and my IT dept controls a a bit more. Getting the error "microsoft office professional 2013 encountered an error during setup" with no other info. I have Windows 7, full admin rights, and closed all other Office apps. I Just did a restart
which also installed all current Windows patches. Got the same error.
Any ideas or where to look for the cause?

I am having the same problem and am dead in the water.
Just in case one of the suggestions might have worked, I went through all of those above with no luck. At first the issue was that the preview version of the OSE was left behind by the uninstall, but I replaced it with the 2010 version, no dice.
I then uninstalled all office products to get the OSE uninstalled, and setup now gets beyond that hangup, but still fails. Following is the section of the log with the errors (MS email me for the full log):
2012/11/07 15:38:25:897::[5980] MSI(ACTIONSTART): 'Action 15:38:25: PublishProduct. Publishing product information'
2012/11/07 15:38:25:897::[5980] MSI(INFO): 'Action start 15:38:25: PublishProduct.'
2012/11/07 15:38:25:901::[5980] MSI(INFO): 'Action ended 15:38:25: PublishProduct. Return value 1.'
2012/11/07 15:38:25:901::[5980] MSI(ACTIONSTART): 'Action 15:38:25: InstallExecute. '
2012/11/07 15:38:25:901::[5980] MSI(INFO): 'Action start 15:38:25: InstallExecute.'
2012/11/07 15:38:25:921::[5980] MSI(COMMONDATA): 'Message type: 0, Argument: 1033'
2012/11/07 15:38:25:921::[5980] MSI(COMMONDATA): 'Message type: 1, Argument: Microsoft Office Shared 64-bit MUI (English) 2013'
2012/11/07 15:38:25:922::[5980] MSI(ACTIONSTART): 'Action 15:38:25: AllocateRegistrySpace. Allocating registry space'
2012/11/07 15:38:25:923::[5980] MSI(ACTIONSTART): 'Action 15:38:25: ProcessComponents. Updating component registration'
2012/11/07 15:38:25:934::[5980] MSI(ACTIONSTART): 'Action 15:38:25: CAOSMRegisterLogonTaskRollback.x64.1033. '
2012/11/07 15:38:25:935::[5980] MSI(ACTIONSTART): 'Action 15:38:25: CAOSMRegisterFallBackTaskRollback.x64.1033. '
2012/11/07 15:38:25:937::[5980] MSI(ACTIONSTART): 'Action 15:38:25: RemoveODBC. Removing ODBC components'
2012/11/07 15:38:25:937::[5980] MSI(ACTIONSTART): 'Action 15:38:25: InstallFiles. Copying new files'
2012/11/07 15:38:26:142::[5980] MSI(ACTIONSTART): 'Action 15:38:26: CAOSMRegisterLogonTask.x64.1033. '
2012/11/07 15:38:26:247::[5980] MSI(INFO): 'CAQuietExec: ERROR: The system cannot find the file specified.'
2012/11/07 15:38:26:247::[5980] MSI(INFO): 'CAQuietExec: '
2012/11/07 15:38:26:248::[5980] MSI(INFO): 'CAQuietExec: Error 0x80070001: Command line returned an error.'
2012/11/07 15:38:26:249::[5980] MSI(INFO): 'CAQuietExec: Error 0x80070001: CAQuietExec Failed'
2012/11/07 15:38:26:250::[5980] MSI(INFO): 'CustomAction CAOSMRegisterLogonTask.x64.1033 returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)'
2012/11/07 15:38:26:253::[5980] MSI(INFO): 'Action ended 15:38:26: InstallExecute. Return value 3.'
2012/11/07 15:38:26:322::[5980] MSI(COMMONDATA): 'Message type: 2, Argument: 0'
2012/11/07 15:38:26:323::[5980] MSI(COMMONDATA): 'Message type: 2, Argument: 0'
2012/11/07 15:38:26:324::[5980] MSI(COMMONDATA): 'Message type: 0, Argument: 1033'
2012/11/07 15:38:26:324::[5980] MSI(COMMONDATA): 'Message type: 1, Argument: Microsoft Office Shared 64-bit MUI (English) 2013'
2012/11/07 15:38:26:325::[5980] MSI(ACTIONSTART): 'Action 15:38:26: Rollback. Rolling back action:'
2012/11/07 15:38:26:325::[5980] Log level changed from: Standard to: Verbose
2012/11/07 15:38:26:465::[5980] MSI(INFO): 'CAQuietExec: ERROR: The system cannot find the file specified.'
2012/11/07 15:38:26:466::[5980] MSI(INFO): 'CAQuietExec: '
2012/11/07 15:38:26:467::[5980] MSI(INFO): 'CAQuietExec: Error 0x80070001: Command line returned an error.'
2012/11/07 15:38:26:468::[5980] MSI(INFO): 'CAQuietExec: Error 0x80070001: CAQuietExec Failed'
2012/11/07 15:38:26:469::[5980] MSI(INFO): 'CustomAction CAOSMRegisterFallBackTaskRollback.x64.1033 returned actual error code 1603 but will be translated to success due to continue marking'
2012/11/07 15:38:26:524::[5980] MSI(INFO): 'CAQuietExec: ERROR: The system cannot find the file specified.'
2012/11/07 15:38:26:525::[5980] MSI(INFO): 'CAQuietExec: '
2012/11/07 15:38:26:526::[5980] MSI(INFO): 'CAQuietExec: Error 0x80070001: Command line returned an error.'
2012/11/07 15:38:26:527::[5980] MSI(INFO): 'CAQuietExec: Error 0x80070001: CAQuietExec Failed'
2012/11/07 15:38:26:527::[5980] MSI(INFO): 'CustomAction CAOSMRegisterLogonTaskRollback.x64.1033 returned actual error code 1603 but will be translated to success due to continue marking'
2012/11/07 15:38:26:537::[5980] MSI(COMMONDATA): 'Message type: 2, Argument: 1'
2012/11/07 15:38:26:542::[5980] MSI(COMMONDATA): 'Message type: 2, Argument: 1'
2012/11/07 15:38:26:546::[5980] MSI(INFO): 'Action ended 15:38:26: INSTALL. Return value 3.'
-Ingram

Unable to upgrade classic planning application 11.1.1.3 to EPMA 11.1.1.3

Hi Everyone,
I am trying to upgrade my classic planning application 11.1.1.3 using epma but i seem to get this error. Has anyone gotten this error before.
Tue May 04 10:55:15 EST 2010 SMRT: Starting Upgrade
Tue May 04 10:55:15 EST 2010 SMRT: Changing product application type to EPMA
Tue May 04 10:55:15 EST 2010 SMRT: Getting Metadata
Tue May 04 10:55:24 EST 2010 SMRT: Processing Metadata
Tue May 04 10:55:32 EST 2010 SMRT: Creating Application View
Tue May 04 10:55:34 EST 2010 SMRT: Updating Application Settings
Tue May 04 10:55:35 EST 2010 SMRT: Creating Import Profile
Tue May 04 10:55:36 EST 2010 SMRT: Uploading flat file
Tue May 04 10:55:37 EST 2010 SMRT: Preparing Dimension Data
Tue May 04 10:55:37 EST 2010 SMRT: Unable to update import profile mappings.
Total Errors: 1 Total Warnings: 0
Please view the EPMA log file for more information.
CB

Do any of the logs provide more information?
Cheers
John
http://john-goodwin.blogspot.com/

Microsoft office 2013 encountered an error during setup in Window 8.1

Initially, I got microsoft office 2013 64bit standard version installed in window 8.1. However, it suddenly got errors when opening office, and closed the program automatically. Therefore, I uninstalled it, and tried to re-install office.
However, I got the error "microsoft office 2013 encountered an error during setup" everytime when I try to install it.
I tried 32-bit and 64 bit version, and tried to install in clean boot, deleted registry, and modified the folder name "Microsoft Help", but none of them works.

Make sure you completely uninstall previous versions of Office. There may be remnants left behind, even after you uninstall Office using the normal procedure. I recommend using the “Fix It” utility to uninstall Office 2013 completely. Please refer to this
article: http://support.microsoft.com/kb/2739501/en-us you might also follow the manual steps provided on the same page.
If you still having problems, re-registering the Windows Installer and checking permissions on the %TEMP% folder and the C:\Windows\Installer folder to make sure you have full-control. To re-register the Windows Installer run the following commands:
msiexec /unregister
msiexec /register

Microsoft SharePoint Server 2010 encountered an error during setup. One or more required office components failed to complete successfully.

Hi,
I got the below error while installing share point 2010 on Windows 7 OS.
Microsoft SharePoint Server 2010 encountered an error during setup. One or more required office components failed to complete successfully.
Trouble shooted by following link as below
http://christopherborman.blogspot.in/2013/01/installing-sharepoint-2010-on-windows-7.html
But still i am facing the same issue.Please share your inputs to cross this issue.
Regards,
Sudheer
Thanks & Regards, Sudheer

Hi,
I selected Server Farm Mode,stand alone.
Post that installation went fine.
Regards,
Sudheer
Thanks & Regards, Sudheer

"Microsoft Office Professional Plus 2013 encountered an error during setup."

"Microsoft Office Professional Plus 2013 encountered an error during setup."
Can anyone help me?

Hi,
Please first make sure you have completely uninstalled previous installed version of Office. We can use Fix it tool in the following KB article:
http://support.microsoft.com/kb/971179/en-us
http://support.microsoft.com/kb/2739501/en-us
Also try to disable all your security programs when you try installing Microsoft Office.
In addition, please check the following link and try the method descrbed to check if it helps:
http://www.rushinformation.com/microsoft-office-professional-plus-2013-encountered-an-error-during-setup-fixed/
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Hope this helps.
Regards,
Steve Fan
TechNet Community Support

Microsoft Office 2010 encountered an error during setup: With No error codes/

Hello Everybody.
I am trying to deploy Office 2010 on a windows 7 Machine.. This machine has more then what it needs for hardware to run the software so I know it is not hardware related. At the end of the Install the installers hestiates and begins rolling back and finally
providing "Microsoft Office 2010 encountered an error during setup:" but does not provide any error codes what so ever.
I have tried upgrading, Fresh installs, side by side installs, Safe mode, Clean boot, Local admin accounts and other domain accounts. I have also tried numerous so called "fixes" but still get nothing. Sadly after the 2010 install fails 2007 no longer works
so each attempt is abit time consuming. Any Ideas out there that might solve issue ?

Hi,
First try uninstalling all your Addins include connector to test the result.
If not help, try the following steps:
1) Create a new administrator account.
2) Log on and launch the installer.
If things don't quite work perfectly now:
3) If you receive errors accessing your ProgramData folder, use the TakeOwnership registry hack to take control of the entire ProgramData folder, and if needed, create a "Microsoft Office"
folder with "Microsoft Office 2010 Tools" inside it under %programdata%\Microsoft\Windows\Start Menu.
4) Your error may return at the end of the installation, but don't worry, it's finished and Office is now installed. Switch user (don't log off!) and go back to your own user. Double-check
that everything works. Now, to turn off your computer, press and hold the power button for five seconds. This will force the computer to shut down instantly, which will close the installer with the error without giving it the opportunity to roll back its changes.
Sincerely,
Harry

Can you copy Classic Planning Applications?

Hi,
Is it possible to take an existing Classic Planning application, and make a copy (or duplicate version) of it? For Essbase applications, this is a simple process in EAS, just right click the application and hit Copy. However, while this method will copy a Planning applicaiton's outline in EAS and nominally show a new application in Enterprise View, it does not actually create another application in the Planning workspace. This makes sense, because the process for creating Planning Applications is not done in EAS. There are two questions I have, and an answer to either would be appreciated. First, is it even possible to make a copy of a Classic Planning Application, in order to allow two different admins to work seperately in two independent applications that both begin with the same dimensions, outline hierarchy, data forms, task lists, user provisions, and initial data set? Second, if it is possible, what is the process, or could someone point me in the direction of where I may find this in guides? Thank you.
Edited by: user3x3 on Apr 9, 2009 6:55 AM

Thanks,
I am a bit confused by what you mean when you say "replace SQL repository". I am not very experienced in this area, I am using SQL Developer to access the RDBMS. Could you explain what the steps are for this? I can find the tables that are created when a new Planning App is made, but I'm not sure what they mean, so the more specific you can be, the more helpful it would be.
Also, when in Shared Services, I select the artifacts I want to migrate, and then click Define Migration, bringing up the Migration Wizard. However, after I select the source (which is the Old Planning App), I click next to select the target, and the screen goes blank white and seems to be stuck. I can exit out of the screen, but I have let it load for 20 minutes now several times, and it just stays on this blank white screen, like the Migration Wizard has frozen. Any ideas of what might be causing the Migration Wizard to go blank?
*Additional note: I am also no longer able to check the Artifacts box for Relational Data in Shared Services for any of my applications, and am not able to open up the Tree to expand it. The artifacts for Plan Type, Configuration, Global Artifacts etc. can still be selected.
Edited by: user3x3 on Apr 10, 2009 7:32 AM
Edited by: user3x3 on Apr 10, 2009 7:33 AM

Application error during release to LiveCache

Hi Experts.
I got some orders stucked in my Outbound Queue in ECC side as SysFail with the error "Application error during release to LiveCache". When I click to activate the queue the order is released and transferred to APO. The question is Why is getting stopped?
Thank you!

Hi Everybody.
SAP Provided me a note to implement to fix this issue. The note number is 1238616 but I need to understand how to reproduce this error in SandBox to implement this note and check if the problem will get fixed...
Currently my OSS is assigned to SAP (Live Cache team) to let me know the root cause for this problem and how to reproduce in lower environment (sandbox) to implement the note and check if the problem will get fixed.
As work around we are manually activating these errors in CIF queues that are getting clean.

Classic Planning applications vs PMA Applications

Hello Experts,
"For Classic Planning applications, databases are created and maintained within Planning. For
Performance Management Architect applications, applications are created in Performance
Management Architect and deployed to Planning."
Can anyone explain me, what is better to install --> Classic Planning Application or Performance Management Architect Application? Which is easier to work, what are the advantages and disadvantages? I´ve planned to install Planning 11.1.1.3.
Thanks a lot!

Here is my 2 cents.
I just did EPMA and was told by many that they aren't using it or haven't used it so didn't have much back up.
But I have to tell you I like EPMA much better that Classic planning once you get the hang of it. Also this is where Oracle is going with the product you might as well jump on the band wagon sooner rather than later (ie get used to Classic Planning then having to make the switch).
I find that Classic Planning requires a lot of clicks to get some stuff done and is a bit more streamline in EPMA.
That said EPMA still needs a lot of work. For example your Alias are kind of hidden in Dimension mode. Where I would rather the default be visible instead of having to go to alias and hit F2 to see 1 or all of them.
One of the biggest reasons I like EPMA is Calc Manager. Business Rules sucks if you have to do a lot of calc (way way too many clicks). So as soon as I saw the power of Calc Manager I will never go back to Classic planning and business rules.
Still EPMA is where things are going so you should go there first unless you find a bug then fall back to classic.
One approach people have done though is to create the environment in classic planning and migrate it to EPMA. But if you don't know classic just load direct to EPMA in my opinion.
Let's see what others say.

Classic planning application properties

Hello,
How to view created classic planning application properties as what options had selected when creating application from Classic Application Wizard, Select, Calendar, Currencies, Plan Types, etc.
Regards.

One of the ways:
Take a LCM export of planning application and have a look at ApplicationDefinition.xpad file.
Once backup is done, you can find it at: in 11.1.2.1:
Oracle\Middleware\user_projects\epmsystem1\import_export\<user>\<Dir>\resource\Configuration\Properties
Cheers...
Rahul S.

Metadata from epma Planning application to classic Planning application?

Hi!
I am creating a new classic planning application, but I would like to use all the metadata from existing epma application.
I'm wondering whether it is possible to get metadata from an existing epma planning application to a classic application? Is this possible using LCM?
Or do I just need to get an ads file from the epma planning application and then create a csv file that I would then load into this new classic app using for example OutlineLoad utility.
edit: version 11.1.2.2
kind regards,
user637777

You should be able to export the metadata from the planning application using LCM, you could also see if the outlineload utility will let you export, can't remember if it allows it even if it is EPMA enabled.
Cheers
John
http://john-goodwin.blogspot.com/

Support for Classic planning applications

Hi,
We have developed planning applicaiton using classic. Our client says that the support for classic planning applications will be withheld by oracle and so they want us to convert the classic to EPMA. Is it true that the support will be withheld?
Also it is not possible to load metadata to EPMA applications using Outlineload utility. Am i right?
Regards,
Ragav.

ragavhere wrote:
Hi,
We have developed planning applicaiton using classic. Our client says that the support for classic planning applications will be withheld by oracle and so they want us to convert the classic to EPMA. Is it true that the support will be withheld?
Also it is not possible to load metadata to EPMA applications using Outlineload utility. Am i right?
Regards,
Ragav.I have never heard that mentioned by anybody, there are many classic applications out there that use outline loader, ODI, DIM to manage the planning applications metadata.
No you can't use the outline loader for EPMA, but there is a command line utility :- http://download.oracle.com/docs/cd/E17236_01/epm.1112/epma_batch_user/launch.html
Cheers
John
http://john-goodwin.blogspot.com/

Business Rules error when creating new classic planning application in 9.3.

Im trying to create a new planning application using classis planning application wizard in Workspace. everything seems alright untill i gets an error saying "Business rules cant connect to Planning"
other than this Business rules working fine and i can open business rules in other applications and i can access business rules repository in EAS.
Any thoughts on this ?

Further invesitgation bears this problem out.
Oracle support recommend wrapping the SimpleType in a ComplexType. This does work, but now I have an extra wrapper element to deal with. I either have to use the wrapped type in my other complex, composed Types and/or add an external wrapping element when trying to create Business Services in BPM to call the BusinessRules I've created.
This is a bit messy.
To be clear, this does not seem to be an issue with Business Rules; the BR editor and generation of Facts (including simple restricted types -> JAXB 2.0/Java Enumerations) seems to work correctly. There seems to be an issue exposing DFs as Services. The code which generated the WSDL and its supporting types seems to choke on restricted SimpleTypes.
As a side note, it seems that HumanTasks have a similar limitation
Edited by: wylderbeast on May 31, 2011 3:27 PM

Classic Planning application Error during Setup

Similar Messages

Maybe you are looking for