Classic Po as follow on doc not created and could see Pr instead

Hi All,
Working with SRM 5.0 and ECC6.0 and Classic Scenario.
When I create a SC and assign the vendor with a Back end Contract , the follow on Document created is a PR instead of the expected PO.I have set the PR/Po option in Define the Objects in the Back end system.
System is picking the Condition type 01PB and could this be a reason?
No errors are seen.
Contract no can also be seen in the bbp_pd analysis.
What else needs to be done to create a Po in the Backend against a Back end Contract.
Thanks & Regards,
Nagarajan

we had also faced similar situation.
One reason can be
when SRM tries to create PO wrt contract it also checks
whether it can create a PR if not able to create PO
and it also checks whether the PR doc type is linked to the contract doc type
so as a test
create a PR doc type same as the PO doc type you have mentioned in attribute BSA
and link this PR doc type to contract doc type in ECC
BR
Dinesh

Similar Messages

  • A/c doc not created and error msg "Business Area Miss-Match Check input"

    Hi,
    After creation of new Plant and Business area create a invoice , But my accounting document does't created and error msg show "Business Area Miss-Match Please Check Your Input". plz suggest me.
    Regards,
    Sohail

    Dear Sohail Rahman,
    Looks like the Business area has not been properly assigned.
    Business area can be created for three combinations:
    1. Business area by sales area
    2. Business area by plant and division
    3. Business area by plant and item division
    In your case, check whether the business area is maintained for the combination of plant/division and plant/item division.
    Hope this helps
    Thanks
    Murtuza

  • From pages on a mbp running 10.9.1, pages 5.0.1 does not sync automatically to iCloud after a doc is created and saved. I have rebooted and reset all devices.

    From pages on a mbp running 10.9.1, pages 5.0.1 does not sync automatically to iCloud after a doc is created and saved. I have rebooted and reset all devices.

    Welcome to the Apple Community.
    What exactly do you mean by 'it doesn't save'.
    Does this mean it doesn't save at all, doesn't save to the iCloud folder or doesn't sync with other the devices or iCloud.com.

  • Region is not created and also the item is not added.. Help me

    Hi to all,
    I want to create a region dynamically(in the sense using code). The following code is used but the thing is the region is not created and the item also not created. Using the object of the item, i set the prompt , this is also not working. Suppose this code is wrong let me know how to create regin and under this region an item.
    the code is:
    OAMessageComponentLayoutBean msgcmpntbean = (OAMessageComponentLayoutBean)createWebBean(pageContext,MESSAGE_COMPONENT_LAYOUT_BEAN);
    OAMessageStyledTextBean msgstyledbean = (OAMessageStyledTextBean)pageContext.getWebBeanFactory().createWebBean(pageContext,MESSAGE_STYLED_TEXT_BEAN,OAWebBeanConstants.VARCHAR2_DATATYPE,"Login");
    pageContext.getPageLayoutBean().addIndexedChild(msgcmpntbean);
    msgcmpntbean.setRows(1);
    msgcmpntbean.setColumns(3);
    msgstyledbean.setPrompt("Login User : ");
    Thanks in Advance

    Hi,
    you have created messagecomponentlayout and messageStyled text but you have not added messagestyled text as indexed child in messageComponentlayout....
    Try this:
    OAMessageComponentLayoutBean msgcmpntbean = (OAMessageComponentLayoutBean)createWebBean(pageContext,MESSAGE_COMPONENT_LAYOUT_BEAN);
    OAMessageStyledTextBean msgstyledbean = (OAMessageStyledTextBean)pageContext.getWebBeanFactory().createWebBean(pageContext,MESSAGE_STYLED_TEXT_BEAN,OAWebBeanConstants.VARCHAR2_DATATYPE,"Login");
    msgcmpntbean.addIndexedChild(msgstyledbean);
    pageContext.getPageLayoutBean().addIndexedChild(msgcmpntbean);
    msgcmpntbean.setRows(1);
    msgcmpntbean.setColumns(3);
    msgstyledbean.setPrompt("Login User : ");
    Thanks,
    Gaurav

  • I am having problems with creating my apple id. On the phone it is advising me that the ID is not created and then when i do it online it says that it has been created. Can you advise me on what to do please?

    I am having problems with creating my apple id. On the phone it is advising me that the ID is not created and then when i do it online it says that it has been created. Can you advise me on what to do please?

    Apple ID FAQ   http://support.apple.com/kb/HE37

  • I downloaded the Acrobat 11 trial and  I can open the product. During the install it deleted the existing print driver and did not install a new print driver so I CAN Not create and print pdf files.

    I downloaded the Acrobat 11 trial and  I can open the product. During the install it deleted the existing print driver and did not install a new print driver so I CAN Not create and print pdf files.

    What OS? Have you tried a repair and updates from the HELP menu? The updates may be the key.

  • I downloaded 200  photos, an event folder was created, I could see all the photos and was in the process of editing them when I got a message that iPhoto unexpectedly quit.  I cannot find the photos anywhere on my computer now.  Is there anything to do?

    I downloaded 200  photos, an event folder was created, I could see all the photos and was in the process of editing them when I got a message that iPhoto unexpectedly quit.  I cannot find the photos anywhere on my computer now.  Is there anything to do?

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. 
    Regards
    TD 

  • EDI - Material doc not created

    Hello,
           Iam working with WMMBXY/WMMBID02 (WMMB)  to post a GR on receipt of an inbound IDOC.Iam able to post the GR but material document is not created.Iam posting against an inbound delivery created against a stock transfer order.In my case I need a material document to be created.Can any one help me out in this?
    Thanks,
    Larry

    Hi,
    I believe you are posting it using the FM L_IDOC_INPUT_WMMBXY thru we19(i sa ur earlier post)...
    Could you pls check the following...
    goto se37...display the FM...put a break point at line no - 414-427 (the FM MB_CREATE_GOODS_MOVEMENT is called here)....
    goto we19...execute on foreground and check the return values after this function call...like sy-subrc...the i_emkpf to get the material doc no. etc...
    hope this helps...
    Thanks,
    Renjith

  • Follow on Document not created for the Purchase Request.

    I can able to create a purchase request for the  material with quantiy equal to  or more than 16. If I create a purchase request for the same material with quantity less than 16., Follow-on Document not getting created. I checked the transaction BBP_PD, it does not show other status like Shopping card ordered , approved, Items in Transfer Process and Follow-on Document created. Any Reason for this.?

    Hi,
    please check if there is any tolerance enabled
    Regards

  • A/c doc not creating

    Hi
    user had created a PO and done the GR, But the relevant FI A/C documnent is not created, why is it so?
    NOTE-It is not a free goods and it is not GR non valuated.
    Appreciate your earliest reply
    Thanks
    Anand

    Hi,
    Please check your PO ,whether it is account assigned or not ..,
    if it is account assigned ,against account assignment if GR is non -valuated then system will not generate accounting document ...
    like K,A
    Thanks,
    MLM

  • 'Could not create' and 'Fatal exception' while installing Java

    Win7 64bit
    latest Firefox
    Java 7.10 64 and 32 bit
    Hello!
    Since weeks i have the following problem. Every time i want to install Java (62 or 64 bit), after the installation progress bar reached 100% and the windows closes i get 2 error messages, both containing the errors:
    'Could not create Java Virtual Machine' and
    'Fatal exception occured. Program will exit'
    After closing both error messages i get the 'Installation successful' screen of Java again.
    However, if i start firefox and go to a page requiring java (the official testing page for example), firefox freezes until i kill the process manually.
    So far i reinstalled Java repeatedly, cleaning every trace of it on my system before doing so, including entrys in the microsoft uninstall wizard and the registry entrys, as described here:
    +hkey_local_machine>software>microsoft>windows>currentversion>uninstall
    search for "java"
    delete entrys+
    what is the programms problem??
    edit: i cant acess java from the windows control panel either, i get the same error messages
    Edited by: 981351 on 11.01.2013 07:04

    I don't know that I'll be able to offer up any useful advice but here goes...
    Can you enable extra verbose logging as part of the installation & post the results here or on pastebin.com?
    jre-7u11-windows-i586.exe /l*vx c:\JavaInstall.log(feel free to adjust the log path to a more suitable location)
    All of our users are local admins and tend to install whatever. This leads to a messy environment and we don't always know which version of Java is installed. So, to address that, I created a small script that scours 'HKLM\software\microsoft\windows\currentversion\uninstall' for Java entries, reads the uninstall string then runs the reported uninstall string. The assumption here is that the uninstall string will be an MSI command. (All the machines & versions of Java used the same format.)
    This is a Windows 7 Enterprise (32-bit) environment, but the script also works on 64-bit installations of Windows 7 Enterprise.
    I've tested this with 7u11 and went as far back as 6u21. It should work with just about any version that uses MSI for uninstalling.
    @echo off
    setlocal enabledelayedexpansion
    echo. & echo Checking for Obsolete Versions of Java...
    for /f "usebackq tokens=*" %%a in (`reg query HKLM\software\microsoft\windows\currentversion\uninstall`) do (
         rem echo a is %%a
         for /f "usebackq tokens=2*" %%b in (`reg query "%%a" /v DisplayName 2^>nul ^| find /i "java"`) do (
              rem echo b is %%b
              rem echo c is %%c
              for /f "usebackq tokens=3,4" %%d in (`reg query "%%a" /v UninstallString 2^>nul`) do (
                   echo.     Removing %%c
                   rem echo d is %%d
                   rem echo e is %%e
                   set uninstallcmd=%%e
                   set uninstallcmd=!uninstallcmd:^/I=^/X!
                   rem %%d %%e /qb-
                   %%d !uninstallcmd! /qb-
    :end
    endlocal
    Standard Dislaimer:*
    Neither I nor the respective owners and/or maintainers of Oracle make representations about the suitability of this software for any purpose. This material is provided "as is", with absolutely no warranty of the attached items whatsoever, whether express, implied, or statutory, including, but not limited to, any warranty of merchantability or fitness for a particular purpose or any warranty that the contents of the item will be error-free. Any use is at your own risk. Blah blah blah.

  • When I start Internet Sharing /etc/bootpd.plist is not created and the other device is not assigned an IP address.

    Just like the tite says. I am investigating why my Macbook Pro (3,1) running Mountain Lion will not assign an IP address to a computer connected via Ethernet when Internet Sharing is turned on (laptop receiving WiFi connection, supposed to be sharing connection over ethernet). I tested using a relatives macbook and it worked just fine. It turns out my laptop is not creating the file: /etc/bootpd.plist when Internet Sharing is turned on.
    I have a console log here from when I start internet sharing:
    8/11/12 12:01:13.634 PM
    InternetSharing[724]
    objc[724]: Object 0x7f94c940ead0 of class __NSDictionaryM autoreleased with no pool in place - just leaking - break on objc_autoreleaseNoPool() to debug
    8/11/12 12:01:13.642 PM
    com.apple.InternetSharing[724]
    bind(bootps 67): Address already in use
    8/11/12 12:01:13.642 PM
    com.apple.InternetSharing[724]
    error creating internal interface for devname bridge0@0: Address already in use
    8/11/12 12:01:13.644 PM
    com.apple.InternetSharing[724]
    no bridge interface to service en0
    8/11/12 12:01:13.644 PM
    com.apple.InternetSharing[724]
    unable to create service for en0
    8/11/12 12:01:13.645 PM
    com.apple.InternetSharing[724]
    _MISStartServiceDHCPWithOptions "en0": Operation not supported by device
    8/11/12 12:01:13.645 PM
    com.apple.InternetSharing[724]
    *** no external service
    8/11/12 12:01:38.065 PM
    com.apple.InternetSharing[724]
    *** no external service
    Any help is appreciated!

    Solved it, at least temporarily:
    Investigate process binding port 67 with the following command:
    sudo lsof -i 67
    Close the offending process (in this case: bootps):
    sudo /bin/launchctl unload -w /System/Library/LaunchDaemons/bootps.plist
    Start internet sharing again from the system preferences panel

  • Home directory is not created and cannot log from client computer

    I am trying to set up MacOsX server. I already have another server which is my DNS server. I am trying to create an Open Directory Master server.
    Server was updated to 10.4.8 MacOsX from the beginning of existence.
    I created couple of users in Open directory domain for testing purposes.
    So, the first problem is, that when I am trying to create a user home directory server does not create it and does not give any errors about that. I tried in bash createhomedir utility, it did not work either, again, no error messages.
    Another problem:
    I set up Open Directory master with LDAP. It was set up correctly, no error messages. At least I did not see any.
    The I tried to connect to the server from my client iMac computer which has 10.4.8 MacOsX as well. So I set up LDAP there in Directory services, it was able to find my server and bind to it. Then when I am trying to login with username and password in Open Directory on the server, it does nor recognize it. No error messages in logs as well.
    However, if I am trying to use ssh from client machine to connect to Server using the names which are in Open Directory on the server it allows me to do so. But of course it says no home directory defined.
    Than you very much for responce!

    An Open Directory Master requires DNS running somewhere. You could have a scenario involving 4 servers where: DNS is provided by Server A, Server B is a Web & Mail Server, Server C providing FTP Services and Server D providing LDAP services with managed preferences and automounting Home Directories (ODM). In this scenario DNS is provide by Server A and any other server requiring DNS using Server A’s DNS. You could expand this scenario if you wanted and have replica (fallover) servers for Servers A, B C or D, or if you are the frugal sort just one replica server replicating the 4 primary servers. You can do all of this pretty much in 10.4 GUI with some additional configuration using Terminal
      Mac OS X (10.4.8)  
      Mac OS X (10.4.8)  
      Mac OS X (10.4.8)  

  • Accounting Doc is created and it is in RSA3, but not loaded into BW side ?

    Hi all,
        One Accounting Document (of Credit Memo type) has been created with Tcode VF01 and this document exists in Extractor Checker (RSA3) and BSEG & BKPF tables and it has the corresponding Billing Document (VBELN) details in those tables. The Document with VA03 the Status for Sales Doc & Billing Doc is Cleared, but for the Accounting Doc is 'Not Cleared'. We have loaded the delta with 0FI_GL_4 Extractor in to an ODS, but this record is not coming into BW. Why it is missing ? Is it sitting somewhere and waiting for some other process, PLEASE ???
    Thanks in advance.
    Regards,
    Venkat.

    Hi Sam,
       There are no Selections in the InfoPackage.
       As you said, as default this extractor pulls records a day old. This record was created yesterday and it should be available today in RSA7, isn't it? But, it is NOT in RSA7. I thought that if it is in RSA7 then I could load the Delta again to get the records that were created yesterday. Does it require any other process to move them into RSA7, PLEASE?
    Thanks,
    Venkat.

  • BAPI_BILLINGDOC_CREATEMULTIPLE Billing Doc not created

    Hi All,
    I am trying to create billing document using “<b>BAPI_BILLINGDOC_CREATEMULTIPLE</b>”. Please check code below for my BAPI preparation. Problem is billing document not getting created, in return table message type ‘I’ Message ID ‘VF’  Number ‘044’ Message ‘<b>The item is not relevant for billin</b>g’ and “SUCCESS” table is blank. If I use same sales order via VF01, billing document does get created.
    I will commit once I get return ‘S’. But have you people come across such kind of message. Any ideas or sample code will be of much help. Thanks in advance.
    Regards,
    Tim
    GT_BILLINGDATAIN-SALESORG   = gs_vbak-vkorg.
    GT_BILLINGDATAIN-DISTR_CHAN = gs_vbak-vtweg.
    GT_BILLINGDATAIN-DIVISION   = gs_vbak-spart.
    GT_BILLINGDATAIN-DOC_TYPE   = GS_INIT_ITAB2-auart.
    GT_BILLINGDATAIN-ORDBILLTYP = p_fkart.
    GT_BILLINGDATAIN-SOLD_TO    = GS_INIT_ITAB2-kunnr.
    GT_BILLINGDATAIN-ITEM_CATEG = GS_INIT_ITAB2-pstyv.
    GT_BILLINGDATAIN-REQ_QTY    = GS_INIT_ITAB2-kwmeng.
    GT_BILLINGDATAIN-SALES_UNIT = gs_vbap-vrkme.
    GT_BILLINGDATAIN-CURRENCY   = gs_vbak-waerk.
    GT_BILLINGDATAIN-SHORT_TEXT = 'Test'.
    GT_BILLINGDATAIN-BILL_DATE  = GS_INIT_ITAB2-afdat.
    GT_BILLINGDATAIN-REF_DOC    = GS_INIT_ITAB2-VBELN.
    GT_BILLINGDATAIN-DOC_NUMBER = GS_INIT_ITAB2-VBELN.
    GT_BILLINGDATAIN-ITM_NUMBER = GS_INIT_ITAB2-POSNR.
    GT_BILLINGDATAIN-ITEM       = GS_INIT_ITAB2-POSNR.
    GT_BILLINGDATAIN-NO_MATMAST = co_x.
    GT_BILLINGDATAIN-COUNTRY    = 'AUS'.
    GT_BILLINGDATAIN-MATERIAL   = gl_matnr.
    GT_BILLINGDATAIN-TAXCL_1MAT = '1'.
    append GT_BILLINGDATAIN.
    Prepare for BAPI call
      CALL FUNCTION 'BAPI_BILLINGDOC_CREATEMULTIPLE'
        EXPORTING
          CREATORDATAIN         = GS_CREATORDATAIN
        TESTRUN               = co_x
        POSTING               = co_x
        TABLES
          BILLINGDATAIN         = GT_BILLINGDATAIN
        CONDITIONDATAIN       = GT_CONDITIONDATAIN
        CCARDDATAIN           =
        TEXTDATAIN            =
        ERRORS                =
          RETURN                = GT_RETURN
          SUCCESS               = GT_SUCCESS.

    Dear,
    It seems that you missed the reference document category field which is called "REF_DOC_CA" in that BAPI function.
    And as you might know, the possible values are kept in the domain VBTYP (SD document category).
    Regards,
    Ki-Young
    Edited by: Ki-Young Bae on Oct 24, 2011 4:52 AM

Maybe you are looking for