Classic Report not retrieving when accessing the first time

I have two classic reports on two separate tabs and the first time that I access the tabs, the report does not retrieve. However, if I tab off and then back onto the tab, the report will retrieve.
Any idea why these two tabs are not retrieving when initially accessing the tab?
I have several other tabs in the same application that retrieve properly when initially access them.
Thanks,

I think I remember something like that happening to me because there were variables that were not initialized properly that the report used.

Similar Messages

Firefox won't open when prompted the first time. Says "Not Responding". I have to hit cntrl/alt/del then try starting again. Sometimes multiple times.

Firefox won't open when prompted the first time. Says "Not Responding". I have to hit cntrl/alt/del then try starting again. Sometimes multiple times.

Sounds like a "hang at exit" problem. There are several possible causes for that error. See:
* How to stop the running Firefox process
** In Task Manager, does firefox.exe show in the '''Processes''' tab?
** See: http://kb.mozillazine.org/Kill_application
* What may cause Firefox to hang at exit
** http://support.mozilla.com/en-US/kb/Firefox+hangs (see "Hang at exit" section)
** http://kb.mozillazine.org/Firefox_hangs
** https://support.mozilla.com/en-US/kb/Firefox+is+already+running+but+is+not+responding
* You may need to try Firefox Safe Mode
** You may need to use '''Safe Mode''' to locate the problem: http://support.mozilla.com/en-US/kb/Safe+Mode
**Firefox Safe Mode is a diagnostic mode that disables Extensions and some other features of Firefox. If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes '''before''' starting Safe Mode. When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode". Test to see if the problem you are experiencing is corrected.
** If the problem does not occur in Safe-mode then disable all of your Extensions and Plug-ins and then try to find which is causing it by enabling '''one at a time''' until the problem reappears. '''You MUST close and restart Firefox after EACH change''' via File > Restart Firefox (on Mac: Firefox > Quit). You can use "Disable all add-ons" on the Safe mode start window.
** See the following for more information
*** http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes
*** http://support.mozilla.com/en-US/kb/Troubleshooting+plugins
*** http://support.mozilla.com/en-US/kb/Basic+Troubleshooting

Slow performance pages when accessing for first time

Hi Oracle developers,
Hope this is the right place to ask my question regarding Fusion Applications performance.
I'm dealing with a hard issue in our Fusion Applications 11.1.7 'test' environment for educational purposes. The thing is that whenever a page is accessed the first time (after a restart) it takes a very long time for the page to appear on the screen.
When it has been accessed before the page is rendered almost instantly. I suspect this has to with caching/compilation of the pages.
I already looked at article (Doc ID 1518515.1) and the settings were already set as is described in the solution part of the note.
My question:
Is there a fix for this?
Is there a way to precompile all Fusion Applications JSP pages after a restart.
Hope you can help me out with this!
Kind regards,
Charif

Hi Charif,
we are looking into ways to speed this up, but at the moment there is nothing you can do to avoid this delay. I know this sounds vague, but I cannot discuss future potential features here.
Thanks,
Oliver
Fusion Applications Developer Relations
@fadevrel
http://blogs.oracle.com/fadevrel
http://youtube.com/FADeveloperRelations

I want to save with alt s in the program Exact Online. This function is not working. this is the first time that i use this program with firefox.

Question
I want to save with <nowiki><alt><s></nowiki> in the program Exact Online. This function is not working. this is the first time that i use this program with firefox.
'''edit''', mod escaped the '''<nowiki><s></nowiki>''' to prevent line through question

Submitted too soon... To change your accelerator key for accesskeys to Alt alone (or a different combination), you can change a setting using Firefox's about:config preferences page.
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the filter box, type or paste '''ui.k''' and pause while the list is filtered
(3) Make sure '''ui.key.generalAccessKey''' is set to its default value of -1 (or right-click and choose Reset if it is not).
(4) Double-click '''ui.key.contentAccess''' to open a dialog box to change the value from its current default (on Windows, 5) to your choice of the following:
* 2 = '''Ctrl''' (Fx default on Mac thru Fx13)
* 3 = Ctrl + Shift
* 4 = '''Alt''' (IE/Chrome/Safari default on Win/Linux)
* 5 = '''Alt + Shift''' (Fx default on Windows & Linux)
* 6 = '''Ctrl + Alt''' (Fx default on Mac from Fx14) (Chrome/Safari default on Mac)
* 7 = Ctrl + Alt + Shift
This should take effect as soon as you OK the dialog, so you can experiment in a separate tab. Other combinations are available if you want to try them. See http://kb.mozillazine.org/Ui.key.contentAccess (inaccessible at the moment?)

Running reports in CMC is Slow (the first time)

when we first log into CMC - the report takes 10 minutes or more to run.
when you run it subsequent times - it takes less than 15 seconds...
what could be causing this unbearable delay the first time?
I've seen some people say that you should build a blank report that users can run first - that is not a solution....
Has anyone had a similar experience?

Check the same query on DB, notice how much it takes to run.
What might be happening here is, first time when it ran, that may be normal time it takes to run the report. After that, WEBI processing server (assuming you are running WEBI report) keep it in cache, so next time when it runs for the same data, it takes it from the cache, instead of querying the DB again. That is the reason, you see the results quickly.

Firefox does not load any sites the first time, including Firefox itself, other browsers do.

In the last few days I have experienced a problem logging on to nearly every site the first time. I get the message that the connection was reset....we have 3 identical computers in our home and I am the only one experiencing this problem. I can immediately try again and log on, but it is annoying to get that message with all sites, including Firefox itself, I have tried to clean out my cache and my cookies, but the problem persists.
Also, firefox is locking up my computer frequently. As it is as I attempt to send this message. I will copy and past this into another message as soon as I restart my computer.

Hi cor-el,
Yes the problem has reappeared, so I tried bypassing the cache for my Windows computer as you suggested: Hold down the Shift key and left-click the Reload button, or "Ctrl + Shift + R" (Windows) I then clicked on my bookmark (http://mdotnetpublic.state.mi.us/drive/ ) and I still see a blank screen and a spinning wheel. This seems to go on indefinitely. But like before I posted the question, when I click the reload button it forces the page to load right away.
[running Firefox 32]
I appreciate your quick responses, and look forward to more suggestions. I'll also search the support pages for information about my problem.
Thank you.
Mbr9743

Adobe Form will not go through email the first time it's submitted.

I have created a simple fillable Adobe form that is placed on our local Intranet with a simple submit button at the bottom of the form. The settings on the form are to send the entire form to the email address (which was also entered on the button properties). The first time a new user of the form tries to submit the form it never goes through. The email shows its been sent from the local users Outlook but it never arrives at the destination email address. If the users tries to submit a second form everything works without any problems. Does anyone know whey the first time the form is submitting (basically emailed) it doesn't go through? Is this a problem with the form or with our local exchange server? Any information would be greatly appreciated.
Thanks.
Richard

I have created a simple fillable Adobe form that is placed on our local Intranet with a simple submit button at the bottom of the form. The settings on the form are to send the entire form to the email address (which was also entered on the button properties). The first time a new user of the form tries to submit the form it never goes through. The email shows its been sent from the local users Outlook but it never arrives at the destination email address. If the users tries to submit a second form everything works without any problems. Does anyone know whey the first time the form is submitting (basically emailed) it doesn't go through? Is this a problem with the form or with our local exchange server? Any information would be greatly appreciated.
Thanks.
Richard

Program not responding when starting the second time.

I am currently only using the DASYLab program to find the temperatures recorded by nine different thermocouple wires. On the Worksheet window, I can run the program once with everything running perfectly. If I stop the program and restart it again, it crashes. If I go into the Layout window and try to run it at all, it will not respond on the first try. This happens every time and it doesn't matter what measurement timebase I set it to.

To accurately diagnose your problem, we need the following information. If you do not want to publically post it, you may request DASYLab support at www.dasylab.com or www.mccdaq.com, or call Measurement Computing directly (US) at 508-946-5100.
DASYLab level and version, for example, DASYLab Full V12.0.0 (see the Help-Report)
Your DASYLab serial number - if you post, just the last 5 digits
The operating system
The DAQ hardware and the software version of its drivers
The offending worksheet
- cj
Measurement Computing (MCC) has free technical support. Visit www.mccdaq.com and click on the "Support" tab for all support options, including DASYLab.

Crystal Report not working when posting the report to the Crystal Server.

Hi All,
I created a report using Crystal Reports 2008 with two ODBC connections (User DSN's). When I run the report in Crystal Reports (where I originally created it) it runs fine with no problems.
I am now trying to load it on Crystal Server 2008. When I try to run this report in InfoView, I get a message: "Error Failed to open the connection." I am thinking that it has to do with the ODBC connections but I am not quite sure. Could someone lead me in the right direction? How will the report that I now saved in the repository on the server connect to the ODBC stream?
Thank you in advance.

Solved my problem. I had to tweak the ODBC drivers on the server.

When using Microsoft Steady State how can I trick firefox into not thinking it is the first time firefox is being used on this computer? I found a registry key trick to prevent firefox from wanting to import settings from IE, but currently my issue is th

Most of the detail is in the initial question because I didn't realize we could add on...but I am currently running steady state on a PC in my office and it is rebooted every night with hard disk protection enabled so I start with a fresh slate every morning. I found a regedit trick to prevent firefox from popping up the "would you like to import settings from IE?" thing every time, but my issue now is that every morning I have to re confirm exceptions for sites that I routinely use... Is there a way to get around having to do that every morning when people log into this computer? I am willing to write a batch script if someone could give me direction or mess with the registry if need be....
== User Agent ==
Mozilla/5.0 (compatible; Konqueror/4.3; Linux) KHTML/4.3.5 (like Gecko)

Most of the detail is in the initial question because I didn't realize we could add on...but I am currently running steady state on a PC in my office and it is rebooted every night with hard disk protection enabled so I start with a fresh slate every morning. I found a regedit trick to prevent firefox from popping up the "would you like to import settings from IE?" thing every time, but my issue now is that every morning I have to re confirm exceptions for sites that I routinely use... Is there a way to get around having to do that every morning when people log into this computer? I am willing to write a batch script if someone could give me direction or mess with the registry if need be....
== User Agent ==
Mozilla/5.0 (compatible; Konqueror/4.3; Linux) KHTML/4.3.5 (like Gecko)

When was the first time phone activated

Is there any way to find out when my phone was first activated? I purchased a "new " phone and tried to sent it in for repairs, and was told phone was out of warranty. Purchased the phone on july 24 2012, still have 2 months left if warranty is a year. Can anyone help. I believe I was sold a phone that was returned and re sold as new.

Hey stkplr6,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
This information can not be gathered. You may want to contact your network service provider to see if they can provide this information.
Let me know if you have any more questions.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

F380. When printing the first time, the preview image shows the same old document

I have a HP Deskjet F380 All In One. The OS of my laptop is Windows Vista, provided with the latest updates. When after starting the laptop, a first print order should be executed, after pressing the PRINT button, the preview window shows not the concerned document, but a very old one. The printing order will be corrected finished, however the old document preview remains somewhere. I am looking for a way how to remove that old document from the preview.

Some of the troubles with printing could be addressed in the system update:
•Mac OS X 10.6.8 Combo Update v1.1
http://support.apple.com/kb/dl1399
{Usually if there were printer drivers (often are) for all of the main brands
of printers, these Combo updates included them; plus later or more
recent versions of these, are available from the maker's support site.}
I'm a bit curious if you'd tried a second-user account to see if (once set up
from scratch) that would give you some other information on how to go in
and re-set your main user account's print settings.
Some basic system issues can be resolved by simple things, such as in
the use of Disk Utility's 'repair disk permissions' that can affect almost all
things a user can do in the system.
•OS X Printer & Scanner Software Available for Download:
support.apple.com/kb/ht3669
•Mac printing and scanning on HP Support Forums - BoardReader:
http://boardreader.com/fp/HP_Support_Forums_1153782/Mac_printing_and_scanning_22 27042.html
[About old MacBooks, I can see by the OS X version that it could be
almost any MB prior to 2010 that could run Snow Leopard. My old
MacBook1.1 (coreduo, first edition MB 2006) can run it, but isn't.]
Been several years since I used an HP all-in-one, it worked OK until one
day it would not print. It pretended to print, the heads went back & forth;
but no ink came out. New cartridges, almost new HP device; checked
drivers (got newest) and as the unit was new-old-stock, the warranty was
gone in short order. A relative bought it ahead of need; clock was ticking.
So my current AIO is an Epson, bought it new at 55% off. Even has a
real phone modem for the fax. And it does OK prints. Not as good as
my older Epson photo printer, whose inks are harder to find now.
Anyway, hopefully you could fine the helpful paper usually included with
the HP printers, a quick reference set-up guide; they have Mac info, too.
Good luck & happy computing!

Certain website does not load page on the first time in Firefox 31

Hello,
When I start Firefox 31 after loading Windows or again after clearing internet cache, this particular bookmark of mine " http://mdotnetpublic.state.mi.us/drive/ " won't load the web page. All you see is a blank screen and a spinning wheel.
However, if I click on the reload button the page then loads correctly.
I don't have this problem with any of my other bookmarks.
Does anyone know what the problem might be? Thanks for your help.
MBR9743

Hi cor-el,
Yes the problem has reappeared, so I tried bypassing the cache for my Windows computer as you suggested: Hold down the Shift key and left-click the Reload button, or "Ctrl + Shift + R" (Windows) I then clicked on my bookmark (http://mdotnetpublic.state.mi.us/drive/ ) and I still see a blank screen and a spinning wheel. This seems to go on indefinitely. But like before I posted the question, when I click the reload button it forces the page to load right away.
[running Firefox 32]
I appreciate your quick responses, and look forward to more suggestions. I'll also search the support pages for information about my problem.
Thank you.
Mbr9743

My AS3 buttons only work the first time

I have set up my buttons so that are each a movieclip with 'over' and 'out' states/frame labels. They exist on the main timeline. The actionscript controlling them is situated in a frame on the main timeline and the frame holding that actionscript is on the same point within the main timeline where the buttons are introduced. I am using actionscript 3.
The buttons have been set up so that they navigate to another frame on the same main timeline and on that frame is a movie. The movie dimensions are smaller than the main stage so the buttons are still accessible when each movie is played.
The problem is my buttons are only working once - by that I mean they go to the correct place when clicked the first time, but when they are clicked again they navigate elsewhere.
Totally doing my head in trying find a solution and if anyone can help and show me what I'm doing wrong that would be really really helpful. Here's the code I used for the buttons...
stop();
function mainBtnOver(event:MouseEvent):void {
event.target.gotoAndPlay("over");
function mainBtnOut(event:MouseEvent):void {
event.target.gotoAndPlay("out");
///////// INDIVIDUAL BUTTON CLICK FUNCTIONS
function mainBtn1Down(event:MouseEvent):void {
gotoAndPlay("01Movie");
function mainBtn2Down(event:MouseEvent):void {
gotoAndPlay("02Movie");
function mainBtn3Down(event:MouseEvent):void {
gotoAndPlay("03Movie");
function mainBtn4Down(event:MouseEvent):void {
gotoAndPlay("04Movie");
function mainBtn5Down(event:MouseEvent):void {
gotoAndPlay("05Movie");
////////// Button 1 Listeners
mainBtn1.addEventListener(MouseEvent.ROLL_OVER, mainBtnOver);
mainBtn1.addEventListener(MouseEvent.ROLL_OUT, mainBtnOut);
mainBtn1.addEventListener(MouseEvent.CLICK, mainBtn1Down);
////////// Button 2 Listeners
mainBtn2.addEventListener(MouseEvent.ROLL_OVER, mainBtnOver);
mainBtn2.addEventListener(MouseEvent.ROLL_OUT, mainBtnOut);
mainBtn2.addEventListener(MouseEvent.CLICK, mainBtn2Down);
////////// Button 3 Listeners
mainBtn3.addEventListener(MouseEvent.ROLL_OVER, mainBtnOver);
mainBtn3.addEventListener(MouseEvent.ROLL_OUT, mainBtnOut);
mainBtn3.addEventListener(MouseEvent.CLICK, mainBtn3Down);
////////// Button 4 Listeners
mainBtn4.addEventListener(MouseEvent.ROLL_OVER, mainBtnOver);
mainBtn4.addEventListener(MouseEvent.ROLL_OUT, mainBtnOut);
mainBtn4.addEventListener(MouseEvent.CLICK, mainBtn4Down);
////////// Button 5 Listeners
mainBtn5.addEventListener(MouseEvent.ROLL_OVER, mainBtnOver);
mainBtn5.addEventListener(MouseEvent.ROLL_OUT, mainBtnOut);
mainBtn5.addEventListener(MouseEvent.CLICK, mainBtn5Down);
I'm sure it's me doing something very stupid - I'm very new to AS3. Any help much appreciated.
Thanks :-)

If the frame labels you are going to have movie clips that have your presentation content, you should use gotoAndStop("frameLabel") instead of gotoAndPlay("frameLabel"). There's no need to play the main timeline when you go to and show any of these movie clips. I'm not sure if this is your issue, though... Using your code, I had no problems.
Also, you can set up your animated buttons in a way that eliminates the need to have your ROLL_OVER and ROLL_OUT events. This isn't necessarily better, but just another method. Although I might use other ways to animate a button, I do like to reduce the code it takes to use the buttons in an interface, and only use CLICK in most cases.

If this is the first time you received this mail, it contains the history for the entire month

HiYa,
this is the message I get when I try to send a message from my website created with Adobe Muse and uploaded via FTP:
"Form PHP script is missing from web server, or PHP is not configured correctly on your web hosting provider. Check if the form PHP script has been uploaded correctly, then contact your hosting provider about PHP configuration."
I know this is an old issue but there must be a solution.......
Apart form this message I get as well in my mail this one:
Note: If this is the first time you received this mail, it contains the history for the entire month so far.
Below are the recently upload scripts that contain code to send email. You may wish to inspect them to ensure they are not sending out SPAM.
/home/thepixel/public_html/scripts/form_check.php:108: {
/home/thepixel/public_html/scripts/form_check.php:109: $sent = mail("[email protected]", "Hi", "test message", "From: [email protected]");
/home/thepixel/public_html/scripts/form_check.php:110: if($sent)
Can anyone help me..? thank u very much

That is not entirely true. Mues does generate PHP files when you use the formular widget.
Furthermore, it generates a file named form_check.php which is apparently meant for checking the server-configuration. The file even attempts to send testmails to the adresses seen in the OP.
Sadly, this file is completely unsecure and can be called by anyone who knows the name.
Hence this file can very easily lead to errors and spam-warnings from your provider.
Until Adobe decides to fix this or to atleast warn users about the existance of that file, I suggest you add the following lines to a .htacces file on your server:
<FilesMatch "form_check.php$">
deny from all
</FilesMatch>

Classic Report not retrieving when accessing the first time

Similar Messages

Maybe you are looking for