Classic scenario - PO output by web

Hello all,
we are using SRM 5 Classic scenario.
While saving a shopping cart a PO is created in the backend ECC system.
How can I print the PO via the web ??
Thanks,
Efrat

Hi,
You have to print the PO from the ECC only, you can't access the PO from SRM.
Thank you
Sreedhar Vetcha

Similar Messages

Extended classic scenario - PO print output

Hi all,
Please help me. We have SRM 5.5 (SAPKIBT11) the extended classic scenario.
Could you please tell me Can I print the PO from Web GUI?
If in the Web GUI Output area in PO I set indicator Printer, and to set in Output Pushbutton, in Log I have status - Successfully processed. In trx SP01 the spool status - Compl. But the PO smartforms don't print.
PS: from Output Preview button I can to print the PO smartforms, but I need to print from Output area through the Output Pushbutton. (in the trx BBP_POC or BBP_PPF).
Best regards
Guzal.

Hi, Masa,
Thank you for your advice,
I set the method U:Print Using Berkeley Protocol, after that
in trx. SP01 I have the Error Status on Composite Document -
Status Incorrect (Reason Unknown).
Best regards,
Guzal.

PO output (classic scenario)

Hi experts
We are running SRM 5.0 - classic scenario
How do you get the output information in a classic scenario??
The PO is created in backend and therefore the order must be printed or send from here, but how can the user see that his/hers order has been send or printed from backend, when the users only have access to the web?
Thanks in advance.

Hi
Which SRM version are you using ?
Please go through these links.
Getting PO information from backend (R/3)
PO output medium issue
PO output
Re: PO output fields
PO output from ECC -copy of SRM PO
Control PO output to vendor
Trigger PO output
Triggering SRM PO output to windows spool
PO Output problems
How to change PO output medium depending on document type
Output type triggering
Re: EBP PO Smartform?
Re: Creating SRM PO with Smartforms BBP_PO
Hope this will help.
Regards
- Atul

PO output for Extended classic Scenario from the R/3 backend

Hi,
1) Does the PO output (ignoring the config maintained in SRM server 5.5 for the output) through R/3 backend is standard or it is mandatory to give local outputs from SRM only incase of Extended classic scenario?
Regards,
DV

Hi Anil,
We are working on extended classic scenario with SRM 5.0 & ECC6.0.
Please explain how we can take "PO output for Extended classic Scenario from the R/3 backend ".
Please send the related document to [email protected]
Thanks in advance
Ashutosh

Extended classic scenario local PO Output status

Hello all ,
Need some inputs on extended classic scenario local PO Output.
My requirement is , when ever the put get process successfully in SRM , I need to send a mail to requester saying that u201C for this particular output got processed successfully u201C
I have business requirement, we need to run this report every 30 min, This report has to pull out the all the PO number from the current time to past 30 min, for the output got processed successfully.
To meet this requirement, I am using the output log entry table PPFTTRIGG where we can see the all the PO with the status and time stamp also.
But some how, this table maintaining incorrect time stamp.
Ex: If I create PO, process the PO output, and if I see the time stamp for this PO, its showing as 10 min before the current time.
Did anybody come across this issue? Or can anybody suggest me any alternative approach for this.
I mean is there any function module/ table available, which will give PO Output status also.
Can you please give me any pointers for this?
Seeking your help on this.
Wish you a advance happy new year.
Thank you.

Hi Latha,
Did you have a look at the standard report RSPPFPROCESS. For PO's please pass the below selection screen values along with the appropiate date & time details:
Application = BBP_PD
Action Profile = BBP_PD_PO
Then regarding the time difference, please make sure that the application server time is sync with the actual time of the time-zone. This could also be a reason.
Then what you can do is to clone the RSPPFPROCESS program and add the email notification logic on that.
Please have a look at the BADI BBP_PROCESS_PO, this can be of some help for your requirement.
Hope this solves your problem.
Regards
Kathirvel

Output(print out) in SRM for backend PO in Classic scenario

Hello,
My requirement is to take print out for the backend PO created thru shopping cart in classic scenario.
i know for extended classic scenario Actions works as in that case PO is created locally and then replicated.
But in the classic Scenario where the PO is in backend, can we take print out in SRM becasue the detials of that Po is available in SRM to in Fllow up documents in SRM 5.0.
is there any standard way available to achieve that.
Thanks
Robin

Hi Sarabjeet,
It does not make sense to print PO from SRM in classic scenario because there is no PO in SRM at all !
In classic scenario, PO is created only in the backend.
Only shopping cart is created in SRM.
Kind regards,
Yann

PO approval process in ECC for extended classic scenario

Hi All,
At this moment we are using SAP ECC for procure to pay process. In the existing system set up, our ECC purchase order goes for approval via SAP enterprise portal(EP). We are planing to implement SRM 7.0 Extended classic scenario, so that user can take the advantage of creating PO in their web portal. We don't want to disturb our existing ECC PO approval process at this point of time.
So our requirement is :
User will create PO in SRM. Same PO will replicated in ECC and the PO will goes for approval in in ECC and the PO output will generate in ECC. Can it me possible in extended classic scenario ?
Thanks in advance.
Regards,
Jennifer
Edited by: Jennifer Batty on Aug 8, 2011 5:08 PM

Hi Jennifer,
Since SRM PO will be leading PO in extended classic scenario, why donot you design the process controlled workflow in line with the existing release strategy that you are using for ECC PO?
Thanks and regards,
Ranjan
Ranjan Sutradhar

PO error - extended classic scenario

Hi Guys,
I'm using SRM 5.0 with extended classic scenario...
During creation of the purchase order locally (in SRM) I got the "error in process" status.
My means of T-code RZ20 I got the following info to ithis error:
context:B2B Procurement
object name:Purchase Order
short name: Backend application errors
status: Active
Alert text: PO 700..1: Call of a method or kernel Method that has not been implemented
using Transaction BBP_PD I got the following status:
Status: I1080
Description: in transfer to execution system
Do you have any idea what should I do in order to resolve this outstanding issue?
many thanks in advance for your help.
regards,
Piotrek

Hi
Go to transaction - SPAM to get all the required Patch levels and other required system version details.
Meanwhile, try the following SAP OSS Notes as well ->
Note 508972 - Error during transfer of extended purchase orders
Note 881650 - Duplicate transfer/output of the purchase order
PO status in " error In Process ".
Error in Transfer Process (Urgent )
FOLLOW ON DOCUMENT NOT CREATED ( ERROR IN PROCESS)
Hope this will help.
Regards
- Atul

ASN for extended classic scenario

Hello all,
we have SRM with extended classic scenario (EBP-MM),
is it possible to use ASN (shipping notification) functionality in our system ?
Kind regards,
Arthur

Hi
ASN can be created by the vendor in SUS system for that XI mapping is required. ASn can be created in SUS by any vendor users. I guess it's not possible with ECS.
Please check the SAP Consulting Note 1026638 GR Output Integration with MM-SUS Scenario for R/3 <= 47
You need to have functional background for this:
To create an ASN against PO or SA release:
1. you need to compulsarily put how much qty you are sending against the reqd. qty(shown by PO / SA )
2. dispatch vehicle no. (optional)
3. road challan no. (optional)
4. one more optional entry ( sorry I forgot)
Useful related pointers ->
Re: how does the GR get into SUS---MM-SUS Sceanario
ASN in Extended Classic Scenario with SUS
SUS ASN & Invoice
The specified item was not found.
Do let me know.
Regards
- Atul

Extended Classic Scenario - SHC: Buffer table not up to date

Hello all,
I'm working in SRM_SERVER 550, SAPKIBKT11, and having issues using BACKEND PURCHASING ORGANISATIONS and the Extended Classic Scenario.
According to SAP note 944918 the following indicator should not be required to be set:
Supplier Relationship Management>SRM Server>Cross-Application Basic Settings>Activate Extended Classic Scenario --> extended classic scenario active.
I did set the Backend Purch. Grps Responsible indicator, and I did create organizational units specifically for the backend purch. grps.
We need to set the main part of all SHCs to ECS, but when I do set the indicator in customizing to "extended classic scenario = active", I get a dump in my web environment: 'buffer table not up to date'.
What is causing this failure in my SHC?
I tried to implement BAdI "BBP_EXTLOCALPO_BADI" (method DETERMINE_EXTPO) like described below here: without the line bbp_extpo_gl-bbpexpo = 'X'., I can continue and create the SHCs. Problem is though: all SHCs will get marked as Classic Scenario. So, to make sure the SHCs will always get marked as ECS, I have added this line in the BAdI. Unfortunately this immediately results in the 'buffer table not up to date' error in the SHC itself, as soon as I try to open the details of the new item.
Hope you help me out here?? It doesn't seem to be related to the BAdI, but somehow the system doesn't allow me to mark SHC items as ECS.
Thanks & Regards,
Berend Oosterhoff
SRM Consultant Accenture Technology Solutions - The Netherlands.
BAdI BBP_EXTLOCALPO_BADI:
method IF_EX_BBP_EXTLOCALPO_BADI~DETERMINE_EXTPO.
data definition----------------------------------------------------*
DATA:    wa_mattype     TYPE BAPIMATDOA,
           wa_char18      TYPE MATNR,
           attrib_tab     TYPE TABLE OF bbp_attributes,
           wa_attrib_tab TYPE bbp_attributes,
           wa_value       TYPE om_attrval,
           wa_product_id TYPE comt_product_id.
    bbp_extpo_gl-bbpexpo = 'X'.
from here I did the specific selection for the SC, but that's not relevant here.

Hi Prashant,
Thanks for your quick reply!
Note 1085700 is about Short Dumps when creating or changing a contract. I am trying to create a Shopping Cart, without a reference to a contract. BAdI BBP_DOC_CHANGE_BADI is not active in our system.
Any other thoughts?
Regards,
Berend

Extended classic scenario and printout in ERP

Hi,
we want to use extended classic scenario but the printout of the PO should happen in the backend system. PO is already created in the ERP system but I can't change it (as designed). How is it possible to create the printout from the backend?
Thanks
Hubert

Hi Hubert
This consulting note is for triggering Output of PO from ECC instead of SRM. Printing can happen from ECC if you can switch off PO Output form SRM and start triggering the same from ECC as per consulting note.
Try working with this FM In SRM BBP_OUTPUT_PO_PRINT_REMOTE for printing the PO, if PO Output is still required to be triggered from SRM.
Regards
Virender Singh

Use the MM-SUS in Extended Classic Scenario

HI,my experts :
    The standard function doesn't support the MM-SUS in Extended Classic Scenario .Now I may have two questions about it .
1、 I have one ECC system .I need handle the invice in the ECC system .In other word ,the invoice rcreated in the SUS should transfer to the MM system .But in EBP-SUS ,the invoice is transfered to the SRM system .What can I do now ?
2、 If I want to use the decoupled scenario ,some POs are create in EBP ,and others are created in MM .Now ,which sus I should select ? EBP-SUS or MM-SUS?
   Or some detail document about it .
BR!
   Alex!
Edited by: Alex on May 25, 2010 9:17 AM

Khan has explained most of the things.
The external web service I meant is actually OPI catalog which you need to maintain.
The same has to be entered in the attribute CAT of the EBP purchaser.
To maintain the call structure of this catalog
Get the URL from SE80->BSP appln->ros_prescreen->controller->main.do
then give the client no of yr ROS client
the RFC user user ID from EBP to ROS
it's password
sap-sessioncmd=open
sap-language=sy-langu
the operational purchaser role in EBP (sap_EC_BBP_OP_PURCHASER) should be linked with
the same in ROS via role menu->business partner->screen supplier->right click->change details
->sap-client=ROS client no
The administrator & op purchaser should be present in ROS org structure also
& should have same userID & password as EBP
you have to define the vendor root, the root of the purchasing organization and the currency in
table BBP_MARKETP_INFO in the SRM System (Enterprise Buyer client).
BR
Dinesh

Purchase Order Creation, Extended Classic Scenario

Can someone please explain the different databse tables affected during the creation of a Purchase Order.
Also, is there a transaction with which we can create PO in Extended classic scenario?

hi,
below are the tables effected while creation of PO:
CRMD_ORDERADM_H
CRMD_ORDERADM_I
BBP_PDIGP
BBP_PDBEI
BBP_PDISB
BBP_PDISS
BBP_PDSDLN
BBP_PDACC
BBP_PDTAX
BBP_PDATT
BBP_PDORG
BBP_PDWGT
BBP_PDDYN
BBP_PDEXR
PRCD_ITEM
PRCD_COND
PRCD_COND
BBP_PDDEP
CRMD_PARTNER
as far as your second question is concerned normally we will be creating a PO in SRM/EBP in web browser and it will replicate to the backend ERP.
regards
IGA

Classic Scenario - ECC Partner Functions in Backend PO

H All,
I've searched the forums and can't seem to find a definitive answer to my question
1. When I create a PO in ECC for a vvendor with one Ordering Address Partner (OA) or one Invoice Presented By partner (PI) the partners are automatically assigned to the PO.
2. If I create a PO in ECC for the same vendor from a shopping cart in EBP then only the VN partner is assigned to the PO.
Should the OA and PI partners be assigned when the PO is created via a SC from EBP?
We are using SRM 5.0 in the Classic Scenario.
Regards
Chris

Hi
I think, we cannot send PO output to multiple partners (vendors) at one point of time.
You need to use the 'repeated output' check box in the 'output' tab of PO in SRM to send the PO to other partners.
Rgds
Reddy

Adding Custom Field to Shopping Cart and PO, Classic Scenario

We are running SRM 7.0 with ECC 6.0 as the backend and using the Classic scenario. I want to add a custom field to the shopping cart and have the data transfer over to a custom field (of the same name) on the purchase order to the ECC side. I have already added the field to the shopping cart and have the data saving successfully there on the SRM side. What I am having trouble with is getting the data from the custom field to go over to ECC on the purchase order.
I have extended the Shopping Cart and Purchase Order item structures through configuration on SRM. This has added the fields to the INCL_EEW_PD_ITEM_CSF_SC and INCL_EEW_PD_ITEM_CSF_PO structures, as described in note 672960 (do i need to extend the PO structure on SRM if using the Classic scenario?). I have also extended the CI_EKPODB and CI_EKPODBX structures on ECC as described in note 458591. So the placeholders are there.
I feel like there must be something I am missing. The OSS note 458591 suggests that just adding the fields to the needed structures will cause the data to transfer, but this does not appear to be the case.
I have an implementation of BBP_CREATE_BE_PO_NEW that I can use, but do not see where to add the data in the output parameters of that BADI. Is there a BADI I need to implement on the ECC side?
Any help in this issue would be greatly appreciated.

Dug around a little bit more and stumbled onto this article which solved it for me: [How to transfer custom fields from SRM to ECC|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/20b36c12-685f-2c10-4fb4-ba2e0b969c27?quicklink=index&overridelayout=true]
In BADI BBP_CREATE_BE_PO_NEW I had to add some code to fill in the CS_PO1_DOCUMENT-EXTENSIONIN parameter table with the structure for the BAPI_TE_MEPOITEM structure on the ECC side. The tricky part is creating a string representation of that structure with the correct offset. And it isn't as easy as just counting up the number of characters in SE12. For example, looking at my BAPI_TE_MEPOITEM structure in SE12, my custom field appears to start on character 157, but in reality, I had to offset the writing of my value to character 143. I guess it depends on what types are in there.
But once that gets figured out, it works well. As long as the custom field is added correctly to the CI_EKPODB append structure (which is appended to BAPI_TE_MEPOITEM), the data gets tranferred over in the ExtensionIn table, and SAP automatically knows what to do with the data as long as you have everything in ExtensionIn aligned correctly.
Thanks for the help everyone!

Classic scenario - PO output by web

Similar Messages

Maybe you are looking for