Classic scenario process

Hi All,
I am new to SRM and any guidance, notes, pdf you can provide is appreciated.
Using Classic Model we are creating SC.
SC created in SRM is posted as PR in R3.
R3 generates a PO corresponding to PR.
Both PR and PO are posted back to SRM
Please let me know wt is the procedure to check PO and PR details in ECC6.0.  Where I can see the Po and PR details.
Thanks & Regards,
Venkat

Hi,
you can see the  P.o in ME23N in the ECC 6.0 Backend
PR in ME53N in the Backend system
If you are having SRM portal you can see the P.o and P.R  details in SRM itself
in the monitor shopping cart query --enter the SC no you can check all the status
Regards
Ganesh

Similar Messages

  • Creation of Inbound delivery mandatory for ASN process in classic scenario?

    Dear Experts,
    We are going for classic scenario for our green field SRM implementation process. Our client is not using  ASN process in their existing MM process. However, they are now looking for an oppurtunity to enable Suppliers to trigger ASN using SUS. In such case, is creation of inbound delivery from Buyer side a mandatory process?
    Is the below the process correct?
    PO -> ASN (Supplier using SUS) -> Inbound delivery (Optional) -> Goods Receipt (Mandatory) -> Invoicing.
    Here, I understand that Goods receipt can be verified against the PO or via Inbound delivery to PO. ASN will inform the store keeper in advance about impending goods receipt and smoothen the confirmation process.
    Could you please comment on the above process? Could you please suggest the best practices followed here?
    Thanks and regards,
    Ranjan
    Ranjan Sutradhar

    Hey Ranjan!,
    You are on track.
    The process flow you have shown is true. ASN is available as a standard as part of the MM-SUS process. It makes the buyer aware of any delays in delivery or to make arrangements on shipping docks to receive goods on a said date etc.
    Regards,
    Nikhil

  • PO Creation Process in Classic Scenario

    Hi
    I want to understand the exact PO creation process in a classic scenario. Once the buyer clicks on 'Create Purchase Order' in the SOCO, what are the series of steps that are triggered till the PO number gets displayed in the SOCO screen?
    I assume that the shopping cart has all required data and ready for PO creation.
    With Regards
    Sathya

    Hi,
    The shopping cart is created and approved in SAP Enterprise Buyer. The remainder of the procurement process takes place in the backend ERP system(s) and all other follow-on documents, such the purchase order, goods receipt/service entry sheet and invoice, are located there. With SAP Supplier Self-Services, you have partial supplier involvement for the operational procurement business scenarios when buying materials. There is no support for services.
    Shopping Cart
    SAP Enterprise Buyer
    Approval
    SAP Enterprise Buyer
    Purchase Order
    Backend system
    Goods Receipt
    Backend system (can be pre-entered in SAP Enterprise Buyer)
    Invoice
    Backend system (can be pre-entered in SAP Enterprise Buyer)
    Please award the points if it helps.
    BR,
    Vijay Mittal

  • Error in Process in PO for Classic Scenario

    Hi,
    I am working with classic scenario. I have created one catalog for services where I used service as a catagory(from backend R/3).
    I have maintained contracts for this services in the Backend R/3 as well as vendor lists with respective contract in SRM.
    I have maintained sourcing never carried out as I want direct PO in R/3.
    But when I shop this services from catalog I am getting one error like   Error in Process .
    I can check this status in followon document tab in Shop.
    So how to move for this error...Kindly suggest.
    Regards,
    Navneet

    Hi
    Which SRM version are you using ? what errors are coming in RZ20, ST22, and RZ10 transactions ?
    Please refer few OSS notes.
    550071 FAQ: EBP - Shopping Cart
    897599 Shopping cart: Service order displays no vendors
    496029 Function module COM_PR_UNIT_READ_WITH_PRODGUID unknown
    443734 Shopping basket: Missing message with validation
    510664 EBP 3.5: Processing of invalid vendors
    Let me know incase you need further assistance.
    Regards
    - Atul

  • PO approval process in ECC for extended classic scenario

    Hi All,
    At this moment we are using SAP ECC for procure to pay process. In the existing system set up, our ECC purchase order goes for approval via SAP enterprise portal(EP). We are planing to implement SRM 7.0 Extended classic scenario, so that user can take the advantage of creating PO in their web portal. We don't want to disturb our existing ECC PO approval process at this point of time.  
    So our requirement is :
    User will create PO in SRM. Same PO will replicated in ECC and the PO will goes for approval in in ECC and the PO output will generate in ECC. Can it me possible in extended classic scenario ?
    Thanks in advance.
    Regards,
    Jennifer
    Edited by: Jennifer Batty on Aug 8, 2011 5:08 PM

    Hi Jennifer,
    Since SRM PO will be leading PO in extended classic scenario, why donot you design the process controlled workflow in line with the existing release strategy that you are using for ECC PO?
    Thanks and regards,
    Ranjan
    Ranjan Sutradhar

  • Consignment process in Classic scenario

    HI Experts,
    can anyone let me know whether we can use consignment process in classic scenario.
    we are having SRM 5.0
    If it is possible kindly let me know what needs to be done in SRM to set up the same
    regards
    subbu

    Hi Subbhu
    Azad is correct.
    but you can see this thread but doing enhancement you might achieved .but before comitting to customer you have to do lot of business analysis /business impactsand etc.
    See Yorum thread. you must get an idea.
    STO classic scenario SRM 4.0
    BBP_CREATE_BE_PO_NEW  badi helps
    you need to change the item category /document type must have consignment
    Consignment is items procured on a consignment basis.
    Material number is necessary
    Account assignments cannot be made for material ordered on consignment.
    Goods Receipt is necessary
    Invoice receipt not necessary
    Consignment stocks are managed separately and are not valuated
    br
    muthu

  • P-card  process available for SRM 5.0 extended classic scenario

    Hello,
    I didn't find the information, so I'm posting this message.
    Is  the p-card functionality available for the extended classic scenario in SRM 5.0 ?

    Hi,
    Use of Procurement Cards are supported in Extended calssic scenario from SRM 2007 ..onwards
    HTH
    Rajesh

  • Does classic scenario support for carryout Bidding process in SRM

    Hi,
    if carryout the bidding cycle for classic scenario once vendor is finalised this vendor belongs to SRM vendor only not for the R/3 vendor, for classic scenario PO will be created in R/3 not in SRM so in this case how system will allow to bring SRM vendor to R/3 in order to create the PO in R/3?
    thanks in advance

    As Bill mentioned, replicate vendor from ECC to SRM first. Then you can use the vendor for bidding in SRM. The PO still gets created in backend as it is classic scenario.
    SG

  • SRM 7.02 Classic Scenario - Transfer of Purchase Order to Backend

    Good day,
    I would really appreciate some assistance on the following matter:
    We are implementing the classic scenario of SRM7.02 with ECC6.04 as backend.
    Our process is as follows: Purchase
    Requisitions are created in ECC and transferred to SRM by means of report BBP_EXTREQ_TRANSFER (we do not have PI/XI). These Purchase Requisitions are
    converted to shopping carts in SRM and goes to the Sourcing Cockpit. RFX's are created and responses are entered on behalf of vendors. When I now want to
    create a purchase order from the RFX response, I get a warning “PO xxxx is inthe process of transfer to backend system”.
    When executing transaction SM21, I get a warning “XI unable to access SLD:"Could_not_determine_SLD_access_data".  We do not have PI/XI and I would really
    appreciate if somebody can assist me with the exact entries that must be maintained in table BBP_FUNCTION_MAP to transfer purchase orders from SRM to ECC.
    I changed entries BUS2012 / CreateFromData1 /ERP_4.0/ERP_5.0 and ERP_6.0 from /SAPSRM/CL_SOA_ADPT_PO_CRT_ERP to L_BBP_BS_ADAPTER_PO_CRT_ERP10 and the PO replicated from SRM to ECC, but now in ECC, the purchase ordercannot be changed. It gives an error : Purchase Requisition xxxx can only be
    ordered in system SRDxxxx (which is the SRM system).
    Can somebody also please confirm that once Ihave replicated the Purchase order from SRM to ECC, the Purchase Order can be changed in ECC.
    Thank you in advance,
    Marinda

    I managed to resolve this by changing the system landscape from ERP6.0 to ERP 6.02

  • SRM 7.0  Unable to create PO - Classic Scenario.

    Hello,
    We are able to successfully create the below scenario.
    PR in ECC --> Get PR in SRM --> Start Collective processing -> Transfer to Central System (SC is created for the PR @ this time) --> Create RFx --> Rfx Response --> Create PO. (PO is created in ERP, Classic Scenario)
    We are able to get the PR & we are able to create SC successfully and the PR/ SC is available in Sourcing cocpit.
    Able to create RFx --> Rfx Response.
    Now once the RFx Response is Accepted --> We go for creating PO.
    Classic Scenario.
    The error is due to pricing - debugged and checked as mentioned in my earlier message.
    IPC pricing is switched off and the BADI for simple pricing is activated.
    Error :   " Message A BBP_PD 396 cannot be processed in plugin mode HTTP "
    But this is due to pricing is what i guess.
    Error is raised in FM "BBP_PDPRC_UPDATE".
    Kindly Suggest.
    Unable to Create PO
    Regards.
    Edited by: Purshothaman P on Jul 6, 2010 1:50 PM

    Hi,
    Please check and run the following reports (se38): BBP_CND_CUSTOMIZING_CHECK & RSVMCRT_HEALTH_CHECK and post back the results.
    Note for BBP_CND_CUSTOMIZING_CHECK also run 'Simulation of Pricing with Manual Price' (scroll down after executing the report initially).
    Also the badi information you activated tells us a lot. Although i take it that you executed and read everything that's included in the transaction information. The following sentence gives a prety doubtfull feeling for the CPPR scenario to work for your configuration:
    SAP recommends using this BAdI only in exceptional cases and only after checking thoroughly if it is compatible with the Business Scenarios used.
    Note: From what i've just read IPC has to be disabled, certain badi's etc. need to be disabled. And VMC (sap basis) has to be configured. Please view: [http://help.sap.com/SCENARIOS_BUS2008/helpdata/EN/9C/F90B7CB34A4889935D1733C6756D5B/content.htm]
    Could you also please check and provide whether 'normal' SRM classic scenarios like: SC -> PO do run within your system. Also the error and information you have provided is very little.
    Kind regards,
    Tim

  • SRM 7.0: Classic Scenario no PO is created only PR is generated

    Hi Gurus,
    I am working on SRM 7.0 - Classic scenario.
    When a shopping cart is complete in terms of price, vendor (assigned) and other required data, item stays in transfer process.
    If a SC is incomplete a PR document is created in backend without a problem but when a complete SC is oredered, the status of shopping cart remains I1111 i.e. item in transfer process. I can see in table BBP_PDBEI, backend object type (BE_OBJECT_TYPE) is correctly selected as BUS2012 and the document number of PO is also correctly selected.
    This is the case even for the SC ordered using catalog materials.
    I have checked following configuration and it seems to be ok.
    1.  'Define objects in backend system's
    2. Number ranges definition in SRM and ECC
    3. Document type attribute -BSA in PPOMA_BBP
    Configuraiton wise everything seems to be, I tried to manually transfer the SC using FM  BBP_REQREQ_TRANSFER but it does not change the status of SC it remains I1111
    RZ20 does not show any error for the SC with status I1111.
    Is there any sepcial FM to push the SC in SRM 7.0?
    Any help/tips would be highly appreciated. Thanks in advance.
    Best Regards,
    Amit

    Hi  Amit
    what is the setting here
    1. 'Define objects in backend system's
    is it a prefered vendor or fixed vendor
    update the partner function in bbp_pd here
    if it is 39 - you wil recive pr
    it is 19 you will get PO
    i am afraid , you stated that catalog sc stoo this problem but during debugging check what is the partne rfunction...
    there can be several reasons for creating PR instead of PO. Please see the FAQ note 1173815 for the possible reasons, and the guide for debugging under:
    https://wiki.sdn.sap.com/wiki/display/SRM/Howtoanalyzethefollow-ondocumentdetermination
    MOREOVER NOTE SAYS POSSIBLE REASONS ..
    Note 336658 - Purch req instead of purch order created in backend
    BR
    Muthu

  • PO is not generated for completed SC in SRM.70 classic scenario.

    Hi,
    I am working on SRM 7.0 - Classic scenario.
    When a shopping cart is complete in terms of price, vendor (assigned) and other required data, item stays in transfer process. even we are adding items from catalog.
    If a SC is incomplete a PR document is created in backend without a problem but when a complete SC is oredered, the status of shopping cart remains item in transfer process. I can see in table BBP_PDBEI, backend object type (BE_OBJECT_TYPE) is correctly selected as BUS2012 and the document number of PO is also correctly selected.
    This is the case even for the SC ordered using catalog materials.
    I have checked following configuration and it seems to be ok.
    1. 'Define objects in backend system's
    2. Number ranges definition in SRM and ECC
    3. Document type attribute -BSA in PPOMA_BBP
    Configuraiton wise everything seems to be, I tried to manually transfer the SC using FM BBP_REQREQ_TRANSFER but it does not change the status of SC it remains I1111
    RZ20 does not show any error for the SC with status I1111.
    Is there any sepcial FM to push the SC in SRM 7.0?
    Any help/tips would be highly appreciated. Thanks in advance.
    Thanks,
    Ravi

    learnt that PO number has generated in SRM and the same PO number not exist in ECC.
    check SM58 , rz20 log or Application monitor for the shopping cart.
    or monitor shopping cart click the icon follow on document and errror message must throw in 1 minutes.
    let us see .
    1. what is the settings in define backend OBJECTS
    2. check all basic data in the shopping cart - especially org data
    3. run bbp_check_consistancy report for your id?
    4. every user has the same issue?
    SEE THE RICHARDO technique
    http://wiki.sdn.sap.com/wiki/display/SRM/ShoppingCartStatusI1111-+Resubmit
    Muthu
    Report BBP_ALERT_SB_NOTTRANSFERED is available to change the status of the shopping cart item from I1111 to 'Error in transmission' (I1112) and later on, it is possible to retransfer this shopping cart from Application Monitor/Monitor Shopping Cart transactions.
    1480994  How to process a shopping cart with status I1111
    Edited by: Muthuraman Govindasamy on Jul 16, 2010 11:31 PM

  • PO error - extended classic scenario

    Hi Guys,
    I'm using SRM 5.0 with extended classic scenario...
    During creation of the purchase order locally (in SRM) I got the "error in process" status.
    My means of T-code RZ20 I got the following info to ithis error:
    context:B2B Procurement
    object name:Purchase Order
    short name: Backend application errors
    status: Active
    Alert text: PO 700..1: Call of a method or kernel Method that has not been implemented
    using Transaction BBP_PD I got the following status:
    Status: I1080
    Description: in transfer to execution system
    Do you have any idea what should I do in order to resolve this outstanding issue?
    many thanks in advance for your help.
    regards,
    Piotrek

    Hi
    Go to transaction - <b>SPAM</b> to get all the required Patch levels and other required system version details.
    <b>Meanwhile, try the following SAP OSS Notes as well -></b>
    <u>Note 508972 - Error during transfer of extended purchase orders
    Note 881650 - Duplicate transfer/output of the purchase order
    PO status in " error In Process ".
    Error in Transfer Process (Urgent )
    FOLLOW ON DOCUMENT NOT CREATED ( ERROR IN PROCESS)</u>
    Hope this will help.
    Regards
    - Atul

  • Creation of PO in Classic scenario.

    Hi
    i am using classic scenario.my problem is i have created shopping cart&approved.after approving this PR had been generated.
    ok. now i want to create PO,GR &Invoice with PR.but i could not create with PR.
    so please suggest me How to create PO, GR, Invoice with PR in Back end?
    OR
    Are these created automatically without PR in Backend?
    could any one suggest the process.
    BR
    sss

    Hi
    This control settings available in SRM
    SPRO
    cross apllication settings..
    Define  Objects for Backend System
    check this settings for your material group w.r.t external procurement.
    is it PO creation or PR generate settings?
    Is your Shopping cart has a valid source of supply.
    if your cart is incomplete , PR only created, so check it up.
    br
    muthu

  • PO not generated at backend in classic scenario

    Hi,
    I am working with SRM 5.0 in classic scenario.
    1) I have defined No. ranges for SC and follow-on documents in SPRO. No. range PO is defined for backend (classic) POs. (Checkbox -External is not marked)
    PO - From 3005000000  to 3008000000
    2) I have assigned this no. range PO to document type 'EC' (Pur Order) as external no. range
    3) No. range PO is also defined at R/3 backend for Purchase Orders (checkbox 'External' not marked)
    PO - From 3004000000 to 3009999999
    4) This no. range is assigned to doc. type EC as Internal no. range in R/3 backend
    Now, when I am creating a SC in SRM and ordering it, it is causing an error in creation.
    I see the following description in Admin login:
    Shopping cart 6500005899 (PO 3005000532): BAPI 001 No instance of object type PurchaseOrder has been created. External reference: 
    PO no. 3005000532 is picked from no. range PO defined in SRM.
    But, in SC screen, I do not see any follow-on documents.
    When I check BBP_PD, I find following data:
    BE_OBJECT_TYPE    ->  BUS2012         -> Follow on Document Object Type in backend system
    BE_OBJECT_ID      -> 3005000535       -> Follow on Document Object ID in backend
    (However, this no. belongs to no. range PO defined in SRM. At the backend, the PO no. range starts from 3004000000 to 3009999999)
    BE_INFO_REC    -> 5300002566
    Also, I can see two lines highlighted in Red under Stats:
                           Status                            Description                 Inactive
    HEADER          I1015                         Awaiting Approval                X
    0000000001      I1111                    Item in Transfer Process           X
    My doubt is that ,
    a) Why system is picking PO# from SRM no. range (3005000535) and showing it as backend object ID?
    b) When system is able to fetch the Info record information from backend, why the PO is not getting generated at the backend?
    Why there is an error in transmission of PO?
    Please help.
    thanks

    plz see Peter instructions in this thread
    SC: Error in transmission BAPI 001
    regards
    Muthu

Maybe you are looking for