Classic Scenarion with MM-SUS (SUS-ECC-SRM/EBP)
Hi SRM Gurus,
We are going for SRM Classic Scenario with MM-SUS . SRM 7.0 with ECC 6.0 (Ehp4).
Here ECC will be connected to SRM and SUS ,i..e SUS-ECC-SRM.
I learnt that Classic deployment supports MM-SUS scenario. It means that , every document created in ECC or SRM(EBP) need to replicate in other 2 systems. I have concerns about this replication in 2 another systems.
1. PO-S/C in SRM , creates classic PO in ECC Is this PO sends to SUS ?
2. Confirmation-Is Confirmation done in ECC/SUS/SRM replicates in another 2 systems ?
3. Invoice-Is Invoice done in ECC/SUS/SRM replicates in another 2 systems ?
Can anyone please confirm /suggest , whether this happens or not ?
Regards
NAP
Narendra
I learnt that Classic deployment supports MM-SUS scenario. It means that , every document created in ECC or SRM(EBP) need to replicate in other 2 systems. I have concerns about this replication in 2 another systems. - EVERY DOCUMENT IS NOT CREATED IN 2 OTHER SYSTEMS. SRM PO GOES TO ECC AS CLASSIC PO. THIS CLASSIC PO IS SENT TO SUS WHERE IT CREATES A SALES ORDER FOR VENDOR. SO ITS NOT REALLY EVERY DOCUMENT IN TWO OTHER SYSTEMS
1. PO-S/C in SRM , creates classic PO in ECC Is this PO sends to SUS ? - ECC PO WILL BE SENT TO SUS. SRM-ECC INTERFACE REMAINS SAME HERE. THERE IS NO COMMUNICATION BETWEEN SRM AND SUS
2. Confirmation-Is Confirmation done in ECC/SUS/SRM replicates in another 2 systems ? - CONFIRMATION CAN BE DONE EITHER IN SUS(RECOMMENDED), OR IN SRM, OR IN ECC. CONFIRMATION CREATED IN SRM AND SUS WILL RESULT IN CREATION OF GOODS MOVEMENT IN ECC. GOODS MOVEMENT CREATED IN ECC WILL BE ONLY UPDATED AS A KIND OF FOLLOW ON DOCUMENT IN SUS AND SRM
3. Invoice-Is Invoice done in ECC/SUS/SRM replicates in another 2 systems ? - INVOICECAN BE DONE EITHER IN SUS(RECOMMENDED), OR IN SRM, OR IN ECC. INVOICE CREATED IN SRM AND SUS WILL RESULT IN CREATION OF MM INVOICE IN ECC. INVOICE CREATED IN ECC WILL BE ONLY UPDATED AS A KIND OF FOLLOW ON DOCUMENT IN SUS AND SRM
I hope it clears your doubts....
Regards
virender Singh
Similar Messages
-
Service ( External Staff -Time Entry sheet ) scenarion with SUS
Hi ,
We are going for Classic scenarion with MM-SUS .
But at the same time ,customer want Service ( Ext Staff) Procurement as this is one of the major segment in business and with SUS finctionabilty as well, which will be STANDALONE as per SAP standards.
So ,if we are implementing MM-SUS ,then how we can send the to SUS. Do we need to configure EBP-SUS scenario ALSO well with MM-SUS ?
REGARDS
NAPHi SRM Gurus,
We are going for SRM Classic Scenario with MM-SUS . SRM 7.0 with ECC 6.0 (Ehp4).
Here ECC will be connected to SRM and SUS ,i..e SUS-ECC-SRM.
I learnt that Classic deploymnet supports MM-SUS scenarion. It means that , every document created in ECC or SRM(EBP) need to replicate in other 2 systems. I have concerns about this replication in 2 another systems.
1. PO-S/C in SRM , creats classic PO in ECC Is this PO sends to SUS ?
2. Confirmation-Is Confirmation done in ECC/SUS/SRM replicstes in another 2 systems ?
3. Invoice-Is Invoice done in ECC/SUS/SRM replicstes in another 2 systems ?
Can anyone please confirm /suggest , whether this happnes or not ?
Regards
NAP -
Hi Experts,
I need to develop a scenarion from SRM SUS to ECC through PI.My Requirement is From SUS the invoice is encrypted in a PDF format, PI will decrypt that and pass the data to ECC.(This is the reqirment).
MY concerns are: 1. Which scenario i need to develop in pi.
2. Is there any configuration settings are required in pi to convert encrypt to decry pt.
3. PDF to PDF scenario?
Can you please suggest me on this above requirements
Warm Regards,
Bala.Hi Ranjan,
As of now without Ehp1, vendors are replicated to backend MM systems using a PI scenario "Supply_base_management".
And you are right, from Ehp1 vendor replication will be handled as you mentioned and ECC Ehp4 will support that.
Nikhil -
ASN in Extended Classic Scenario with SUS
Hi SRMer?
Is it possible to create an ASN in SUS with Extended Classic Scenario (ECS)?
OSS note 543544 mention that the scenario is limited for document types Purchase Order, Purchase Order Response and Change Order. Confirmations and invoices are not possible. There is no indication on ASNs.
Any help will be appreciated.
Regards.Hi
Please go through these links ->
SUS-MM Confirmation without ASN
Re: Details on ASN
The specified item was not found.
SUS ASN - mandatory field
ASN Confirmation not created,
Clarifications on EBP-SUS and MM-SUS Scenario
Re: SUS-MM scenario with "POR (order ack.)" and ASN for free text
Creating custom field in ASN screen of SRM SUS
SUS Invoice
Regards
- Atul -
Will MM-SUS scenario work perfectly if we replicate SUS vendors from SRM
Dear Gurus'
We are going to use MM-SUS scenario in our classic implementation of SAP SRM. However, we are not replicating the SUS vendors directly from MM system using BD14.
Instead, we are replicating the SUS vendors from SRM system by ticking the 'Portal Vendor' check box in SAP SRM.
Will all MM-SUS scenario work perfectly in such cases? If I refer the configuration of MM-SUS scenario, it mentions about special configuration for transferring the confirmation key from ECC vendor master data to SUS system. How it will be taken care in SRM-SUS vendor replication?
Could you please share your experience?
Thanks and regards,
Ranjan
Ranjan Sutradharhi,
Are the Suppliers getting Time Out Errors?
are they able to create the documents ?
I have seen these sort of problems in many customers , there is one performance note created by SAP to resolve this issue.
I do not have the note number now.
But you can search the same with keyword performance along with the component areas
SRM-SUS
ans SRM-EBP-TEC-PFM.
Best would be to enquire with SAP also.. -
Hi ,
Supplier want to print Invoice / PO from SUS or Buyer want to print PO from SRM -EBP itself...in this case ,can anyone confirm me, whether we need to "define and use" separte Forms/ Scripts for Purchasing documents like PO, Invoice ..etc in SRM EBP & SRM SUS , other than that we use in backend ECC system ?
Thank you in advance...
Regards
NAPYou must need to maintain a specific smart form for PO/Invoice Output in SRM.
Smartform/Script defined in ECC cann't be used for output in SRM.
Sandip -
Sending RFQs from SRM EBP to SRM SUS
Hi All,
Am having scenario that i need to send RFQs from SRM EBP to SRM SUS.
& SAP provided Standard Content & that was imported in to IR.
In EBP I have Standard Interface for RFQ as RequestForQuotation_Create_Out in namespace http://sap.com/xi/EBP.
In SUS am not having such type of standard interface as RequestForQuotation_Create_in.
Can anybody please tell me which interface i can use or what terminology is using for RFQ in SUS.
Best Regards
sivaHi,
Thanks for reply.
We have done following
1.Customer Settings - https://sandboxsrm5.bhelhyd.co.in:8400/sap/bc/gui/sap/its/bbp_bid_inv
2. Maintain Systems for Synchronization of User Data -
Function modules for Create, Change , Delete has been given with Activation & User procurement BP ID ticked.
3. System parameter
login/accept_sso2_ticket: 1
login/create_sso2_ticket: 2
4. STRUSTSSO2 - Can please elaboarte what exactly we need to do?
5. We have given Roles SAP_EC_BBP_BIDDER & SAP_EC_SUS_BIDDER to vendor in SUS.
We are not able see bids in Vendor login in SUS. but we are able to see PO's in same login.
Regards,
Shiva -
SRM 7 PPS Classic Scenario with Plan Driven Procurement?
Hello experts, I want to know if the combination of SRM 7 PPS Classic Scenario with Plan Driven Procurement is possible? or if there any limitation to consider? Our client needs to create purchase requisition in ERP -> send this purchase requisitions to SRM (as shopping carts) create bids - > quotations - > create contract from accepted quotations and then from the contract we need to create purchase order but this one must be created in ERP (classic scenario) Someone has experimented the same situation? Best regards and thanks for your Help.
LiamHi Lima ,
Classic scenario wont support PPS .
- Stand alone and classic scenario not supported
- Shopping cart renamed to Purchase Requisition
- Shopping cart generate (pre)commitment in funds management
- Contract can create Funds Reservation (Earmarked Funds) in Funds Management as a Guarantee
- Goods Receipt and Invoice created in ERP
- Mixed PO: PO with lines that works like contract lines, a PO can be created from these lines
- PO created from contracts or mixed-PO is named call-off PO. Only is a new name, is a "normal" SRM PO
- Goods receipt possible in SRM only in "easy" cases
Thanks & Regards
Pradeep Kumar Dondeti -
Integration Builder Configuration. SRM/EBP ---- XI ------ SRM/SUS
Hi Masters of SRM.
could you please show how make the configuration in XI into Builder configurations
the scenario is SRM/ebp -
> XI -
> SRM/SUS
any guide because I have the guide for the ERP----> XI -
>SUS. but does not my requirement.
the both systems are in same box but different client.
thanks for yours atentionsThanks: Nichil.
I follow your instructions., when I make simulation in Generation Log. show all lights in yellow color for example:
Receiver Determination(s):
| SRD_009 | PurchaseOrderRequest_Out | * | *
Analysis
Required sender communication component: | SRD_009 A receiver determination was found for the connection All receivers are contained in the receiver determination found
Results
The reused receiver determination is already assigned to the configuration scenario
Notes
Check the conditions for all receivers of the receiver determination. The default result value for the generated condition is: TRUE
I am message for test and I can see the message into PI the estatus is Recorded and flag is color Green.
but no show an error or problems only stay in Recorded Status , othe observation into the SXMB_MONI the fiel Receiver component and Receiver Interface are empty,
what you suggets ?
best regards. -
This is very similar to my earlier post with title "Strange & Unique requirement".
Now I have to send all the POs along with those attachments which are in EBP to SUS with the help of XI.
Any thoughts please.
Thanks
sivaThanks: Nichil.
I follow your instructions., when I make simulation in Generation Log. show all lights in yellow color for example:
Receiver Determination(s):
| SRD_009 | PurchaseOrderRequest_Out | * | *
Analysis
Required sender communication component: | SRD_009 A receiver determination was found for the connection All receivers are contained in the receiver determination found
Results
The reused receiver determination is already assigned to the configuration scenario
Notes
Check the conditions for all receivers of the receiver determination. The default result value for the generated condition is: TRUE
I am message for test and I can see the message into PI the estatus is Recorded and flag is color Green.
but no show an error or problems only stay in Recorded Status , othe observation into the SXMB_MONI the fiel Receiver component and Receiver Interface are empty,
what you suggets ?
best regards. -
Archiving SRM EBP and SUS Data at End of Contract Period
Hi Team,
We are implementation SRM EBP and SUS solution to one of our Customer.
Below is our Landscape Details
SRM 7.01 SP09
Portal 7.3
SP08
MDM 7.1 SP07
We have deployed all the application in our Data Center and customer have signed a 5 contract to use the solution. At the end
of the 5 years, if the customer wants to move to other solution, they the want the master and all SRM related datas to be archived and copied in
a media, where they can retain for 7 years.
Please confirm how this can be achived the SRM solution
Regards
PonnusamyHi Experts,
Can you please help.
At the end of contract, period, if customer wants to migrate data from SAP SRM to some other SRM system, how it can be achieved.
Regards
Ponnusamy -
Hi All,
Am having scenario that i need to send RFQs from SRM EBP to SRM SUS.
& SAP provided Standard Content & that was imported in to IR.
In EBP I have Standard Interface for RFQ as RequestForQuotation_Create_Out in namespace http://sap.com/xi/EBP.
For SUS am not having such type of standard interface like RequestForQuotation_Create_in Standard content.
Can anybody please tell me which interface i can use or what terminology is using for RFQ in SUS.
Thanks in Advance
Best Regards
sivaHi,
Any Thoughts?
Best Regards,
Siva -
SAP ECC, SRM and SNC integraton
Hi everyone,
I want to know if we can integrate ECC, SRM and SNC. We don't want to use SUS, we want to use SNC. Is it possible to have this implementation? If yes, what is the correct technical scenario for SRM (Classic or Extended Classic)?
Thanks,
IváHello Iván,
Regarding your first query, "What kind of changes we can do in SNC " --> As a vendor we can modify the PO quantity and PO delivery date only and update the same as POR. We cannot add any items in the PO.
Regarding your next query ," changes cannot be send to PO if we are in extended classic?" --> i think we can send the changes to the SNC even in the extended classic scenario , but we need to then customize our system accordingly with regards to the document types used , vendor classification , idoc and xml mapping , etc.
We will be using some sort of SRM - SUS integration here in the extended classic.
Also changes can be synched between SRM - ERP - SNC. and we can have the extended classic with ASN creation in SNC.
Best Regards,
Rahul -
Scheduling agreement from ECC 6.0 to SRM EBP 5.0
Hi experts
is there a way to send from ECC 6.0 to SRM EBP 5.0 all the kinds of scheduling agreements?
thanks
regards
andreaHi Andrea,
It is not possible to send Scheduling agreements from ECC to EBP.Same is the case with contracts.
You can only upload backend contracts to SRM. Using GOA you can create either a contract or a Scheduling agreement in R/3.
As informed by Usman, when you integrate R/3 (MM) with SUS it is possible to send S.As to vendors via SUS.
Hope this makes you more clear.Clarifications are welcome.
Award points for helpful answers.
Rgds,
Teja -
Data Type Enhancements: ECC - SRM Scenario
Hello,
Can anyone tell us how to use the Data Type Enhancement. and what all Software component dependencies we need to define for that.
This is with Context for ECC-SRM Integration -- we have installed the add on component LOCINSUS -- this is required for the extra tax information for PO
Can anyone help us on how to use this?
Thanks and Regards,
Himadri/people/michal.krawczyk2/blog/2006/11/14/xipi-data-type-enhancements-standard-business-partner
that solves ur anwer,
Maybe you are looking for
-
Linking .swf to html page using a href ......
I have attempted to get an anwser to this on the Flash forum, but it is a jungle over there.... I have attempted to link a swf to a web page on my site using the a href property; the page opens in Safari and Firefox; however, in IE7 the page shows at
-
I followed the directions in the email I received for how to download the Adobe Pro I purchased. I clicked the Download and another screen appeared telling me I needed to first download Akamai NetSession. I attempted to download the Akamai program; h
-
Photoshop CS4 Mac Student License...
Hey guys! Dan here.. I have a quick question about student licensing, I plan in the new year to purchase Adobe Production Premium for mac on a student license, But I also would like to install Photoshop onto another macbook as well as my main compute
-
I have created profile file for zfs root (flash) on a wanboot server when i try to validate the rules file with check i get following error .. i 'm not sure why i 'm getting this error .. can any one help me on this ? # ./check Validating rules... Va
-
Sql inspector blank - discoverer 10g
There is one report that for some reason will not display the sql inspector. The window remains blank. I thought of redefining the report but it comes from several folders and I am having trouble. I haven't yet figured out how the report was original