Classic to EPMA and alias

All,
Version is 11.1.2.1 with EPMA patch 11804477.
Intially there are no EPMA applications and no dimesnions in Shared library / application library.
When transformed classic application to epma, dimensions are migrated as local dimensions. Then right click dimensions and selected Share Dimension option to migrate them to Shared dimension library (master view). Once the dimension is shared, Aliases of members getting lost.
Tried to share the alias dimension before any other dimension. Still didn't work. Is there a particular sequence or is it expected. Any help greately appreciated.
Thanks
Krishna

Jusdt out of curiosity is the Alias missing in the shared library or when you view the alias property in the appview? Have you activated all associations in the appview? If you do so does this bring in the property? If I recall right sometimes the associated properties aren't available except in the appview and with the correct associations activated.
-A-

Similar Messages

  • Classic Vs EPMA and Calc Manager in 11.1.2.3

    I'm trying to remember if it is possible to use the Classic mode in 11.1.2.3 or if you are finally forced to EPMA and Calc Manager? Does anyone know?
    We are looking at doing an upgrade and want to make sure we pick the right version.
    Thanks

    You can use Classic metadata management in 11.1.2.3. You can also use EPMA with "Classic" rules if you'd like.

  • Hyperion Planning Classic or EPMA?

    Hi,
    We are creating new Hyperion Planning applications (11.1.2.2.300) and it is time to decide if we should continue using Hyperion Planning Classic or move to
    EPMA. We are already using Calculation Manager, but not Dimension and Application Library. Currently, we have DRM installed and we bring all Metadata
    from DRM into Oracle tables. We are using ODI to load data/Metadata from Oracle tables to Hyperion Planning / Essbase. I heard that Hyperion Planning Classic may go way in near future. I'm not aware of any ODI KM for EPMA but I know that EPMA has improved a lot recently. Any advice or comments on either way will be great appreciated.
    Thanks,
    Caio

    10CAP_BR wrote:
    Hi,
    I heard that Hyperion Planning Classic may go way in near future.
    It is definitely not going away, if you take 11.1.2.3 there was lots of new functionality introduced for classic and not so much for EPMA, if you look at Oracle's cloud solution it is classic only as it runs on Linux and no windows which EPMA still requires.
    If you are already using DRM and ODI ask yourself what benefit you will get from EPMA, if you feel you will gain from EPMA then try it out, it is long old debate classic vs EPMA which everybody has there owns views on so there is no definite right or wrong but I know from experience which one I prefer
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Datasource set to NONE after classic to EPMA conversion

    Hello everyone.
    We recently transformed a classic Hyperion application to EPMA.
    Everything seems to be alright and the application is working fine after conversion.
    However, when performing application deploys, we've noticed that the datasource appears to be set to NONE, as seen in the following image:
    https://c69ee7db-a-62cb3a1a-s-sites.googlegroups.com/site/ktratsites/Home/deploy_none.png
    The system seems to be respecting the actual datasource that we set up for this application (name it APPDSCR), but the "Deploy" dialog window shows this NONE.
    Should we be worried about this?
    Is this a known issue of transformed applications?
    Is there a way so the actual datasource is shown again instead of NONE?
    Thank you.
    Best regards,
    G.S.Feliu
    Edited by: G.S.Feliu on 13-mar-2013 2:15
    Edited by: G.S.Feliu on 13-mar-2013 2:16

    Hi again.
    I'm finding a new issue related to this topic.
    The application we transformed from Classic to EPMA exists in two environments: DEV and PRO.
    It happened the PRO application was updated with new dimension members, hence the DEV application should be updated, too, so we decided to perform a migration from APPNAME PRO to APPNAME DEV. Everything seems ok as of this point.
    I exported the EPMA local dimensions (all dimensions are local in these applications) from APPNAME PRO, then proceeded to import them in APPNAME DEV.
    When I tried to redeploy APPNAME DEV, I got an error message. The log reads:
    [21-mar-2013 12:20:00]: An Exception occurred during Application deployment.: You cannot change the Default Currency after deploying. You must select USD as the Default Currency before redeploying the application.
    This makes no sense at all. The default currency for both applications has allways been ARS. However, the system shows the deployed application's default currency is USD. I'm working this via SR with Oracle.
    I run a diagnostics test on both applications, and both failed the "Deployed status but not in product" test, as seen here:
    https://sites.google.com/site/ktratsites/Home/diagnostics.png?attredirects=0
    I made a dummy move and chose "Retrieve potential deployed locations". This allowed the correct datasource to be shown in the "deploy application" dialog box instead of NONE, but didn't resolve the problem.
    BTW, FinFu, the applications do not exists anymore in Classic Planning Administration.
    All in all, I don't know whether all this verbose clarifies something to you or not.
    Regards,

  • Help Please..Until recently I have owed 2 iPod Classics - 2007 80gb and 2009 160gb (which has since been returned). How do I transfer the library from the 160 to the 80gb in iTunes using Windows Vista (ie merge the 2 libraries)? Thanks

    Until recently I have owed 2 iPod Classics - 2007 80gb and 2009 160gb (which has since been returned as it had a very noisy hard drive).
    How do I transfer the library from the 160gb  to the 80gb in iTunes using Windows Vista.
    Nothing seems to help on the Apple support pages, so any help would be appreciated
    Thanks

    Thanks for the reply, but not actually sure how to sync a second iPod with the library of the first, as I thought it would not recognise a new iPod for copyright reasons.
    Also, the files are in a location on the pc but I had to do lots of formatting amendments in iTunes as most of the stuff was on mp3 files and the formatting was all over the place. I did not want to loose any of the work by simply asking the new iPod to look at the original file and would rather copy en masse from one device to another.
    Any help or pointers greatly appreciated
    Thanks

  • Hello. I have an ipod classic generation 4 and I want to add some more music to it however my computer and itunes do not recognice it when I try to connect it. Is it incompatible with windows 7 or itunes?

    Hello. I have an ipod classic generation 4 and I want to add some more music to it however my computer and itunes do not recognise the device when I try to connect it. Is it incompatible with windows 7 or current version of itunes?

    It should still be compatible.  Have you tried plugging it into a different USB port using a different cable to see if that helps?  Perhaps, try it another computer as well to see if it's recognized there.
    Otherwise, start by checking to see if it's even recognized in Device Manager.  See this article for details.
    http://support.apple.com/kb/ts1496
    B-rock

  • How can I get itunes to download on my PC. I just got an ipod classic for Christmas and can not get Itunes to download. Website goes to downloaded page but i never get a downloading popup. I even turned off my popup blocker.

    How can I get itunes to download on my PC. I just got an ipod classic for Christmas and can not get Itunes to download. Website goes to downloaded page but i never get a downloading popup. I even turned off my popup blocker.

    Make an appointment at the genius bar.
    If you went without an appointment, then it would make sense that you could be turned away.

  • How to display member name and Alias in seperate columns

    Hi,
    We have a report in HFR which has Employee dimension. We set that member display both Member name and alias. But the report showing both in one column with a - seperator. Is there a way to display them in seperate columns.
    Thanks,
    DD

    Thanks Mehmet. But whenever I try to insert a column, it throws this error: You can't insert a column here.
    I have the grid like this.
    Account
    Children of Employee
    I need to display the member name and alias of Employee dimension inseperate columns. Could you Please help me how to do it?
    Thanks,
    Ram.

  • Some songs in my Ipod classic get get off after a few seconds of playing, but they work fine in ITunes and other Ipods.  I have reset the classic several times and same issue happens, any ideas?

    Some songs in my Ipod classic get get off after a few seconds of playing, but they work fine in ITunes and other Ipods.  I have reset the classic several times and same issue happens, any ideas?

    I have that exact same problem! It plays albums fine. But individual songs including ones downloaded from iTunes either skip or play the music of another totally different song. All play fine on iTunes and my iPhone... Got this one to replace my dying 5th gen classic.
    I hope there is a fix for this, cause it *****!!!!

  • I just Bought a IPod Classic 80 GB, and it is stuck!

    I just bought a IPod Classic 80GB today, and it is stuck. On the screen it says ejecting you may disconnect now. I have disconnected. My question is how do I clear that?

    Hmmm, I bought a 60-GB Ipod Classic at first then it was stolen. The thing is my 2 year warranty didn't kick-in, nether did my car insurance which doesn't cover theft.
    So I had to take the loss and come up with cash for another Ipod but this time it was the 80-GB Classic. Now this one has crashed. So I may try ZUNE this time, are you listening @ APPLE ? I've only had this new one since July 7th- 07.
    So far I've shelled out roughly $930.00 for two APPLE Ipods with the 2 year warranty in approve. 18 months.
    Another thing is that I didn't transfer the warranty to the new Ipod. They don't tell you themselves about the transfer but you have to take the initiative yourself. They never offered to give me the paperwork. There you have it the pitfall of not transferring your warranty. Without that warranty you are left holding the bag. So get that warranty puuuleeeezze.

  • Classic to EPMA automation

    Hello,
    Can someone tell me if there is a utility for automating the Classic to EPMA conversion instead of using "Transform classic to EPMA" in workspace?
    Thanks

    Hi there
    I don't think there is a utility that will do this. I can't think of a way unless you scripted the EPMAFileGenerator.exe to run or something like that.
    Why do you need to automate the conversion? In my experience this is a one time activity that doesn't take too long..
    Thanks
    jpr

  • IPod classic is locked and wants a combination. Never set one. How do I unlock?

    iPod classic is locked and wants a combination. Never set one. How do I unlock?

    Is your iPad new in the sense of being brand new or is it the latest generation?
    If you do not have very much on it you could connect it to iTunes on your computer (if you use one) and on the screen that pops up starting with the Summary tab click on the Restore button further down. Be sure to set it up as a new device? You will lose any saved data but at least it will unlock your device. Alternatively, you could could do it through Settings on your ipad. Either way, you my have to redownload your purchased apps again.

  • Classic G/L and New G/L

    Hi  Friends,
    What is the difference between Classic G/L and New G/L.
    Will assign the points.
    Best regards
    SAP

    Hi,
    WE STILL HAVE dummy profit centers IN NEW G/L
    1. Merge FI
    a. Reduced data redundancy
    b. Reduced error for period closing
    c. Harmonized reporting
    d. New General Ledger with reduced total cost of ownership (Faster Close etc.)
    e. Profit Center Accounting is eliminated and is now part of New GL
    f. Cost of Sales accounting is now part of New GL
    g. Special Purpose Ledger is now part of New GL
    h. Reconciliation Ledger is eliminated and is now part of New GL
    i. Segment reporting
    2. Merge FI, PCA & SL
    a. Replacement of special ledger A/C
    b. Enhanced audit ability
    a. Better integrated reporting
    b. Unified Financial & Management Accounting
    c. Extensibility for customer dimension
    3.
    a. Document splitting
    b. Enhanced reporting across Profit center and segments
    4. Parallel accounting
    a. More transparent COA reporting, Auditablity
    What is parallel accounting and its features?
    • Any number of parallel ledgers
    • Online posting to multiple ledger
    • Standard reporting for multiple ledger
    Segment is a part of company that led to expense and revenues.
    Configure New G/L
    Before anything you need to activate them & make the general setting for accounting.
    More, configure the ledger you use in G/L accounting with basic data you setup the integration with controlling (CO) and where applicable to parallel accounts.
    assign points if useful,
    Thx,
    Paarthu

  • Classic Withholding Tax and Extended Withholding Tax

    Hi,
    What is the difference between Classic Withholding Tax and Extended Withholding Tax.
    Regards
    RKG.

    Hi
    Withholding tax is calculated and posted to the appropriate withholding tax accounts at different stages, depending on the legal requirements in each country. As a rule, withholding tax is posted at the same time that the payment is posted, in other words the outgoing payment (Accounts Payable) or incoming payment (Accounts Receivable), is reduced by the withholding tax amount. 
    In certain countries, such as Brazil, the Philippines, and Spain, withholding tax can or must be posted when the invoice is posted. This means that the amount receivable or payable is reduced by the withholding tax amount.
    Extended withholding tax supports both concepts. 
    The key concept in extended withholding tax is the distinction between withholding tax type and withholding tax code. While withholding tax types represent basic calculation rules, specific features of these rules - in particular the percentage rate -
    are represented by the withholding tax code. You can define any number of withholding tax codes for a given withholding tax type.
    If a particular transaction requires more than one kind of withholding tax, this is covered in the SAP System by defining more than one withholding tax type.
    When entering a line item, you can enter withholding tax data for each of these withholding tax types.
    How To Configure Withholding Tax?
    Steps for extended withholding tax :
    1. Check withholding tax countries
    2. Define Ex. Withholding tax types for invoice postings
    3. Define Ex. Withholding tax codes
    4. Formula for Ex. Withholding tax calculation
    5. Assign Ex. Withholding tax types to Company code
    6. Activate Ex. Withholding tax
    8. Create a G/L a/C for Ex. Withholding tax
    9. Define A/C for Ex. Withholding tax (DBWW)
    10. Make changes in Vendor master (XK02)
    11. Maintain Company Code Settings:
    Path: IMG -> Logistic -> General -> Taxes on goods movement -> India -> Maintain company code settings
    12. Activate country version for specific fiscal year position
    Path: IMG -> FA -> -> **** -> Taxes on sales purchases -> Basic Setting -> India -> Activate country specific for fiscal year position
    http://help.sap.com/saphelp_erp2005/helpdata/en/e5/0780914acd11d182b90000e829fbfe/content.htm
    nagesh

  • Cannot create Portal System and Alias in System Landscape in Portal

    hallo all,
    i want to install vc, therefore i need to create an Portal System and Alias.
    this i should do in system landscape in the portal
    (System Admin -> System config -> System landscape )!
    but when i open it, it is loading and loading and nothing happens!
    can someone tell me, what problem that could be?
    ep 7.0 is installed and i want to connect to ERP 2005 ECC 6.0.
    regards Vartan

    Vartan,
    The VC needs a portal in order to run - it needs to borrow the core portal and J2EE functionaliy as the VC components only bring in VC specific applications.
    One question to ask, based upon personal experience, is what browser are you using here please? For instance, I've hit this issue when working from Firefox (1.5 or 2.0) but not when I'm running the same link in IE 6.0.
    Just a thought. Let me know how you do.
    Cheers,
    Tim

Maybe you are looking for

  • Multiple devices (iPads & iPods) on one Apple ID - questions

    OK, here are my questions.  Any help/advice would be appreciated as I'm only a recent Apple convert (after 30 years of refusing to buy Apple!): a)  Can I manage my entire family's devices (4; 2 iPads + 2 iPod Touch's) with a single Apple ID (which al

  • I need to get rid of a calendar alert

    I keep getting a calendar alert that I need to delete (it's a medication prompt that is now a week off from the proper schedule.)  It says it is attached to the home calendar at my me.com account, but when I sign into the cloud to check, there is no

  • Window7 Not updated

    I am tryying to update the  Window 7 but not updated showing error code 80073712.Kindly check & resolved

  • Transfer data from a 1998 apple to an intel imac?

    What are some options?  I have an ipod.  Can that be used?

  • Workbook with Discoverer Viewer in Apps 11i?

    With the help of (Doc ID: 278095.1) I was able to link Discoverer workbooks in Apps 11i. But all of my workbooks open with Discoverer Plus. How do I open some of the workbook with Discoverer Viewer in Apps 11i? I can open all my workbook directly wit