Classic -- Virtul OS 9 possible?

Is it possible to run classic in OS X in the same way that Virtual PC works? What I mean is can Classic be set up so that a window stays open where you can see the screen that you would see on a machine booting up in OS 9?

Dear Tim,
Welcome to Apple Discussions.
Tim I understand your concerns of running OS 9 just like Virtual PC in a window. however what is the need for OS 9 to work like that when OS 9 can be booted on os X (soft boot ) and you can easily run application at the same time while you are on OS X. That is an easy where you are on a dual OS at the same time. It cannot be reduce to a window because a classic boot is actually a soft boot over OS X. I am not sure if there are any third part programs which can help you to boot it within a window like Virtual PC.
Hope this helps.
Good Day!
Ravi Dimri.

Similar Messages

  • How can i set songs within a playlist, or an entire playlist, so that they are not included when using the shuffle function on IPOD Classic? Is this possible?

    How can i set songs within a playlist, or an entire playlist, so that they are not included when using the shuffle function on IPOD Classic?
    Is this possible?

    You can set any song to Skip when shuffling.
    In your iTunes Library, highlight the song and right-click/Get Info. On the Options tab is the Skip when shuffling box. Select that and then Sync the iPod with your Library.

  • I have an ipod nano 8gb which is full, my husband is a jazz fan, I am thinking of buying another ipod classic 160gb - is it possible to link this to the same library in itunes and just put all his jazz on the new ipod?

    I have an ipod nono 8gb which is about 5 years old and is full - my husband is a jazz fan, and now I have  jazz on my little ipod and my ipod touch. I am thinking of getting an ipod classic 160gb and putting all his jazz on to it. Is it possible for me to link it to my Itunes library and his Itunes library and just put all the jazz on to the new Ipod classic? if so, how do I then delete the jazz of the other two ipods?

    There is no limit to the number of iPods you can sync to one computer, iTunes library, or account. 
    You might want to create a seperate iTunes library for him, perhaps on another user account on the system and move all of his Jazz music over to that new library.  Once you have all of his music moved over to his own library, remove it from your own and then resync both of your iPods to clear his music off.  This is just one way to do it.
    If that was a bit confusing, take a look at this article for a few ways to manage multiple iPods with one computer.
    How to use multiple iPods, iPads, or iPhones with one computer
    B-rock

  • Copy Tiger Classic Support into Leopard Possible?

    I tried asking this in Leopard's pre-release forum and the responses were, shall we say "less than helpful."
    Before you answer (noting that this is the "Classic Environment" discussion group), I am well aware OS 9 is dead (duh), I have an expensive CAD program that I would have to take out a small business loan to upgrade to the current, OS X compatible, version. Classic is the answer I can afford right now. The business loan will come in the future when I upgrade to a Macintel (my PowerBook can handle everything I throw it, thank you very much, and doesn't need replacing).
    Please don't tell how dead OS 9 is and how I should move on (I have, with the only this exception). It is insulting to me and a waste of time for you. Please don't tell me about rebooting into a Tiger partition, I already know about this and it is inconvenient for my work flow. This is also not a discussion on the relative merits of Leopard over Tiger or Apple's decision making process.
    On to my question: Is it possible to copy the TruBlueEnvironme (I'm not talking about the OS 9 system folder, that's just drag and drop), blued(?) and it's associated PreferencePanes, Menu Extras, etc. from Tiger into Leopard and have Classic work? Or did Apple do something else behind the scenes at the kernel/UNIX level that makes this impossible?
    Thanks in advance (and for staying on topic).

    Unfortunately no. Low cost CAD software is so crude as to be unusable.
    "Engineering" software lives in it's own special "reality." If you haven't worked with software in this area you'd probably be surprised to learn engineering software costs between 4x to 10x the amount of software in any other area costs with equivalent level of technology or sophistication. The excuse is always that the end users has more to gain financially when they use engineering software over other types of software. Which, of course, doesn't hold up when you consider that advertising firms can make tens of millions of dollars making an ad campaign using Photoshop. Using low cost CAD software is kinda like using textedit to do a sophisticated, high end layout that would normally only be done in InDesign.
    The CAD software in question is extremely well done and very Mac friendly (and I still recommend it others). It started off a Mac app from a small, family run business. It was so good, it became the standard for "low cost" architectural software (on any platform). At the time Apple (and this CAD company) switched to OS X, they got bought by a German company that sold very expensive architectural software. When they took over, the price went from $495 to $795 (depending on the packages you bought) with $50 to $100 upgrades, to $1200 to $2000, per seat (unlike "standard" apps, you can't use one license on both your desktop and your laptop) with $445 upgrades (and then, only from the immediately proceeding version). In our two man, family run business, that would cost us $2900 to get "two seats" with the same functionality as we have now.
    P.S. To get a feel for the weird little world engineers live in: I went to a sales seminar for a new Windows engineering software package that did 3D modeling back in 1995. The one feature that totally blew away the engineers (and the sales team for that matter) wasn't the photo-realism of the renderings, the ease with which the models could be produced, or the rendering speed; it was the fact that you could copy and pasted data and images between programs in the suite. 11 years behind the times and they charged an arm a leg for it.

  • BBPSC18 - Request for external staff - Classic Scenario in SRM 5.0 possible

    Hello Community,
    one of my customers wants to use "Reqest for External Staff". As far as I remember, in SRM 5.0 it is only possible in "Standalone Scenario".
    Is this assumption correct? So not possible in Classic Scenario?
    How about "Extended Classic"? Probably not possible either, right?
    Thanks for any help or input!
    Cheers, Julian

    Hi Rahul,
    thanks for your answer!
    Actually I am only looking into the part "Request for External Staff" - "Acceppt Bid" - "Create PO (Classic in ERP)".
    I have seen that this part works in SRM 7.01.
    But currently we are not planning to upgrade. We are still on 5.0.
    I tested the abovementioned process in our DEV-System. I behaves fine, no error messages. But when I want to create the PO out of the "Check Status" (yes, in SRM 5.0 this was possible), the system pretends to create a PO but it never gets created. So I just wonder if I missed some customizing, or if this also only works in Standalone or if there maybe is a smart technical workaround (some custom coding etc...).
    Cheers, Julian

  • My iMac harddrive crashed and was replaced and I would like to put my iTunes library back in to computer off my iPod. Is it possible and how do I do it?

    I just got my Mac back with a new hard drive. I lost part of my iTunes library but it was saved before the loss of the hard drive on my iPod Classic. Is it possible to use the iPod as an external hard drive and regain my library on my computer? If so, how do I do it?

    See this excellent user tip from another forum member turingtest2 outlining the different methods and software available to help you copy content from your iPod back to your PC and into iTunes.
    Recovering your iTunes library from your iPod or iOS device
    B-rock

  • Classic scenario - goods receipt in SRM

    Hi,
    I've seen on a business scenario document of SAP that even in the classic scenario it's possible to execute goods receipt by the requester in SRM. My question is: if in classic scenario the purchase order is created on R/3, how can the requester create goods a receipt in SRM for a specific PO? Does SRM get data (items, supplier, etc.) from a R/3 PO in the creation of a goods receipt document?
    Regards,
    Cristiano Soares

    HI SRM GURU
    We are implementing SRM 4.0 and follow a classic scenarios.
    While creating a shoping cart the approval of Shopping cart is based on various attributes like
    Material Group + Cost Center  + Value .
    Can I change the standard workflow conditions and add new conditions like material Group and cost centers.
    So that when I create a Shopping cart and change the cost center in the shopping cart, it goes to the head of the new cost center(for Approval) which is manually entered in the shopping cart.
    Can this control be achived through the Org plan attributes.
    Regards,
    Nimish Sheth

  • Can we activate Classic General Ledger in ECC6.0 during upgrade from 4.6C

    Dear SAP Gurus,
    Greetings
    My Client's technical team had upgraded their system from 4.6C to ECC6.0 and they had activated classic GL instead of New GL. And they had also activated classic withholding tax in place of Extended Withholding tax.
    They are facing some error during posting of transactions (like generation of excise invoices, posting of WHT transactions, etc.) I told that it can be a reason of not activating New GL.
    Is my understanding correct...?? Can we activate classic GL during upgrade from 4.6C to ECC6.0...??
    In case of a new client built (with ECC6.0), can we activate the classic GL instead of the New GL..??
    Does the system will work correctly in the long run if they had activated classic GL and classic WHT...??
    Please clarify. Thanks in advance for your time and efforts
    Regards,
    Chaps
    P.S. Points will be awarded for answers !!

    Hi,
    I think that you should read long text of OSS note 999614 carfully and you are
    aware of the fact that you will have additional migration efforts in
    case you need to migrate to new G/L later on.
    In case you are convinced that  this is the best way please feel free
    to deactivate new G/L as described in note 999614.
    Please make sure that you deactivate new G/L in all clients of your
    new system in case there were already client copies done.
    Yes this is possible and I would not automatically assume that
    error during posting of transactions are due to New GL not being activated.
    Note 756146 documents the issue and possible repercussions
    of using Classic GL.
    In the case of a new installation the new G/L accounting
    is active by default in ERP. In principle, the use
    of the classic GL is also possible for new customers, however,
    SAP does not recommend it since this requires an additional
    migration expense in later years.
    Regards,
    Aidan

  • Purchase Order Response in Classic Scenario

    Hi Experts,
    Implementation Scenario- CLASSIC
    SRM Server - 5.0
    Question-
    1) Within Classic Scenario, is it possible for to create Purchase Order Response in SRM for a PO which is already created in backend? This PO is generated by a shopping cart in SRM.
    Best Regards,
    Amit

    Hi Amit,
    You can create POR for a PO which is already created in backend, no matter if its created with reference to SC in SRM. This POR would be done by the supplier in SUS scenario.
    It possible in both, classic and ECS scenario's.
    Regards,
    Prashant

  • Purchase order replication – extended classic scenario using XML proxy via PI

    Hi Experts
    Question:
    In case of extended classic deployment is it possible to use XML proxy to
    transfer SRM purchase orders to ECC? As we know as of SRM 7.01 its via RFC
    whether SRM 7.02 onwards does SAP support XML for ECS too?
    Has
    anyone read about this in any of the SAP forums?
    Background: In our project, client have invested
    heavily on XI and XI monitoring and troubleshooting, integrated to SAP SOLMAN.
    And would like to opt for XML mode of transfer and reuse existing solution.
    This is the main reason we would like to be very clear in our understanding
    before we go back to client.
    We appreciate your time and support.
    Regards
    Prashanth

    Dear Rahul,
    Thanks for you input
    Let me give you an example of the behaviour:
    in PPOMA_BBP TOG assigned to user has : DQ with $1000 and upper percentage 5%.
    User orders a PO  with quantity=1000, price $100;
    No additional tolerances assigned in the PO itself
    User tries to enter confirmation with quantity 1001 (so qty variance converted to currency amount results in $100 over delivery) So the confirmation is under both the 5% and the $1000 limit.
    In that case I donu2019t receive an error message from the SRM, but the error message u201CBackend Purchase Order quantity exceeded by 1 EAu201D from ECC still prevents me from posting the Confirmation. And this is the problem I havenu2019t been able to solve so far.
    So I want the TOG tolerance to be used. And I am also happy with the absolute limit always having priority over percentage limit...
    But I am trying to find a way to get rid of the back end message (with assigning a tolerance to the PO itself as the will get rid of the absolute limit see my previous post.)
    Cheers
    Ulrike

  • Extended Classic Scenario - Can Purchase Requsition be created in R/3?

    Hi SRM Gurus,
    In Extended Classic Scenario, Is it possible to have Purchase Req to be created in the backend?
    Technically whether it is possible or not? Functionally, there is no such need, I agree.
    Thanks & Regards,
    Ramkumar

    Hi
    Please confirm what sceanrio in SRM are you planning for ?
    I have not tried this. In Extended Classic Scenario, using BADI " BBP_TARGET_OBJTYPE"    -> I guess, it's possible, but not sure. Try it out. 
    Purchase Order (PO) will be created in the R/3 system using the BADI -  BBP_TARGET_OBJTYPE. Please read the standard documentation of this BADI, before implementing the same.
    Regards
    - Atul

  • Migrating planning Application EPMA to classic

    Hi Everyone,
             I've already googled this question, but did not find any important information. So, can anyone help me on that ?
            I've been requested to convert a Hyperion Planning app from EPMA structure to a Planning Classic.  I've already know that there is a wizard in workspcae where you can  convert from Classic to EPMA, but I'm not sure if is possible to convert it back to classic.
          Is it possible using this wizard  or there is no way to do that ?
    Thanks in advance
    Regards

    There is no wizard to convert it back, in the planning system database, HSPSYS_PROPERTIES there is a property_name called EDIT_DIM_ENABLED, if it is in EPMA mode this is set to false, in classic it is set to true.
    In that table the properties are per application so you need to find the application id = HSPSYS_APPLICATION and match match it to the property_id and this will give the info you need to change the value.
    Any changes require a restart.
    Please note this does not remove it from EPMA you have to work out a process to remove that e.g. delete the app, recreate, etc
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Create new Generating style Extending the Classic Style

    Hi all,
    When creating an ITS screen, you can choose a Generating style.
    Default (at our system) there are 3 templates available:
    - Business HTML
    - Classic
    - WebGUI
    is it possible to create an own Generating style?
    At present we are using the CLASSIC STYLE.
    However, I need to alter the generated TEMPLATE file every time I create one.
    Is there some way that one could extend the CLASSIC style to have my own style generated to accommodate the modifications?
    I have used the style as per the specifications of Mobile Template generator and that is not what I want. I want to extend the Classic HTML style.
    This is a high priority issue for me. Thanks in advance.
    Arup

    Hi,
    Thanks for the response. II have already used the Mobile Generator Style for my customized style generator and that is not what I want.
    I need to extend the classic HTML style to create my own style to generate the Templates in the format I need.
    Is there some documentation or some class from which I should extend to generate my Generator to be used.
    Any help on this would be appreciated.
    Thanks,
    Arup

  • SRM classic scenario with shopping cart

    In a SRM classic scenario it's possible to create a shoping cart for material stock or it's only possible to create for indirect material (center cost, order, etc).

    Hi Carla
    yes. Indeed you need enhancement
    http://wiki.sdn.sap.com/wiki/display/SRM/BBP_CREATE_BE_PO_NEW-CreatePOin+backend
    you need to clear the account assignment while creating a PO in the backend.
    so PO will be created in the backend rather than in SRM .
    but see impacts - how inventory gl accounts are posted while doing good receipt. Is it taking GL account from valuation class .
    Hide the Order as direct too in SRM .
    create one custome field in shopping cart to determine to order a PO in the backend (for stock materials) so when you check this field, this sc item PO will be created without account assignment.
    Muthu

  • Service procurement using Extended classic scenario

    Hi All,
    Can Extended classic scenarion supports service procurement.
    I mean SC with services and PO with services in SRM  without hierarchies
    If not any work arounds
    Abdul Raheem

    Hi Abdul ,
    Service procurement using Extended classic scenario is not possible
    PO wont able to create in SRM .
    Thanks & Regards
    Pradeep Kumar Dondeti

Maybe you are looking for