CLASSIC will not recognize my zip drive

classic will not recognize my zip drive...i have one program that roland will not update and it only runs in os9...so the program opens but will not let me select the zip drive as a option...please advise if classic can detect zip drives etc...thanks soo much...
oh and the driver for os9 is installed etc as well...

1 is the Zip drive a SCSI, a ATA, or a USB Zip? Or are you talking about a flash memory drive?
2 if you're not talking flash memory, do you have a disk inserted into the drive, and is it formatted HFS or FAT?
3 if you are talking flash memory, is the flash drive formatted HFS or FAT?
4 can you get to the desktop in whichever application this is?
5 which application is it that you're trying to use?

Similar Messages

System Profiler will not recognize installed hard drive if drive is in use by VMWare

System Information will not recognize installed Hard Drive (Boot Camp) when in use by VMWare.
I work in IT for a School District and I am creating a Script that system information about the computer. I am testing this on a Mac Pro with two internal hard drives. One drive is Mac OS 10.8 and the other drive is a Boot Camp Drive that is used by VMWare Fusion.
When I run System Information via the GUI or system_profiler via Terminal, both drives show up just fine. However, if I launch VMWare Fusion and run Windows from my Boot Camp drive, then run System Information via the GUI or system_profiler via Terminal, the Boot Camp Drive is no longer listed as an installed drive.
Example:
In the Terminal, I enter the following command.
system_profiler SPStorageDataType
Then it returns this information.
Storage:
    Lion Client:
      Available: 217.84 GB (217,836,306,432 bytes)
      Capacity: 639.28 GB (639,275,270,144 bytes)
      Mount Point: /
      File System: Journaled HFS+
      Writable: Yes
      Ignore Ownership: No
      BSD Name: disk0s2
      Volume UUID: CCB501BF-AF24-30E7-A938-5A4E52DF14D7
      Physical Drive:
          Media Name: WDC WD6400AAKS-41H2B0 Media
          Medium Type: Rotational
          Protocol: SATA
          Internal: Yes
          Partition Map Type: GPT (GUID Partition Table)
          S.M.A.R.T. Status: Verified
    BOOTCAMP:
      Available: 255.58 GB (255,575,560,192 bytes)
      Capacity: 319.79 GB (319,790,510,080 bytes)
      Mount Point: /Volumes/BOOTCAMP
      File System: NTFS
      Writable: No
      Ignore Ownership: Yes
      BSD Name: disk1s2
      Volume UUID: D4B39D4E-E244-403C-AE4D-4D58397130DE
      Physical Drive:
          Media Name: WDC WD6400AAKS-41H2B0 Media
          Medium Type: Rotational
          Protocol: SATA
          Internal: Yes
          Partition Map Type: GPT (GUID Partition Table)
          S.M.A.R.T. Status: Verified
Then I launch VMWare, which uses the Boot Camp drive. The once again run the same command from the Terminal Command and I get this.
Storage:
    Lion Client:
      Available: 213.39 GB (213,392,244,736 bytes)
      Capacity: 639.28 GB (639,275,270,144 bytes)
      Mount Point: /
      File System: Journaled HFS+
      Writable: Yes
      Ignore Ownership: No
      BSD Name: disk0s2
      Volume UUID: CCB501BF-AF24-30E7-A938-5A4E52DF14D7
      Physical Drive:
          Media Name: WDC WD6400AAKS-41H2B0 Media
          Medium Type: Rotational
          Protocol: SATA
          Internal: Yes
          Partition Map Type: GPT (GUID Partition Table)
          S.M.A.R.T. Status: Verified
The Boot Camp Drive is no longer listed.
I assume this is due to the the fact that the drive is "In Use" however is seems odd since the Mac drive is also in use and it appears without problem. I assume there is no "fix" for this, I was just wondering if someone may have an explaination why?
Also, I do realize that I can query the various interface types like system_profiler SPSerialATADataType to get all the properly installed phycial drives, but then I would have to query all possible interface types, isolate only devices containing Volumes, then consoldate the information to just the information that I need. I was hoping for a cleaner query.

Thank you for your response.
VMWare may be the cause, but the actual issue I am having is with Apple's System Information. I anticipated resistance from VMWare if I went to them with a question about an Apple software issue (even though VMWare software is part of the equation). I was trying to avoid the inevitable finger pointing game. I thought I would try with Apple Forums first since the issues presents itself within the Apple Software. However, you are correct that VMWare may have an explanation on why Fusion might be interfering with System Information. I will check with them next.
To answer your question. Yes, In most cases I do use Fusion to run Windows side-by-side with the Mac OS. However, that is not always the case. There are a few reasons why I have it setup using a Dual Boot configuration.
One, in some cases, due to the intense programs I occasionally run (graphic applications), I prefer to simply boot straight into Windows via Boot Camp so I may allocate all hardware resources to Windows. Additionally, some graphic applications like to have direct access to hardware and the extra layer of the VM environment can cause problems when an application is trying to directly access specific hardware like a graphics card.
Second, I often use either side, both Mac and PC, for testing. There is an advantage to not having to rely on the Mac OS to run Windows. If, for whatever reason, my Mac becomes unstable due to testing, I can still jump right into Windows to do work if necessary.
Third, I love the Mac OS, but I work in a PC centric organization. If there is a "problem" with my system, it is too easy for other system admins to say, "it's because it's a Mac". Having the definitive separation of the OS's allows me to prove that the Mac OS is not a factor.

I have iMovie 09. I just erased my external hard drive, but it is still formatted for the mac. However, iMovie will not recognize the hard drive. It shows the only hard drive available is the computers. How do I get the external hard drive to show up?

I have iMovie 09. I just erased my external hard drive, but it is still formatted for the mac. However, iMovie will not recognize the hard drive. It shows the only hard drive available is the computers. How do I get the external hard drive to show up?

In Finder's Menu, select Go menu>Go to Folder, and go to "/volumes". (no quotes)
Volumes is where an alias to your hard drive ("/" at boot) is placed at startup, and where all the "mount points" for auxiliary drives are created for you to access them. This folder is normally hidden from view.
Drives with an extra 1 on the end have a side-effect of mounting a drive with the same name as the system already think exists. Try trashing the duplicates with a 1 or 2 if there are no real files in them, and reboot.
If it does contain data...
http://support.apple.com/kb/TS2474

IMac 400dv will not recognize new hard drive installed

Hi,
I had been having trouble with my iMac 400dv's hard drive. I had posted the problems I was having and had gotten some very nice feedback. The final decision was to install a new hard drive and battery.
I purchased a refurbished 40GB Maxtor to replace my old 20GB. Installation was no problem except that my iMac will not recognize the new drive. If I reinstall the old one, it recognizes it right away, so I know it has been installed correctly.
I took the new hard drive back to the store and the tech said that it wasn't set on the "Master" position. He set it and tested the drive and said that it was fine. I reinstalled and get the same result, no drive can be sellected to install the software. No matter where I set the pin, I get the same result. I called the phone help line (MicroCenter) and the new tech told me that the drive was too big for my mac, which makes no sense to me since they suggested I buy a 100GB in the 1st place.
I have 1GB of memory, my installation disk if for 8.6 and I will bring it up to 9.2 if I can get it running again.
Any suggestions?
thanks,
Lucy

Lucy Rust...
In my opinion no Macintosh user should attempt to install a refurbished HD under any condition. Especially any HD that is to be bootable as they are no longer reliable for the Mac.
Master setting is a must for the HD and never tinker with an optical setting. Well, if you could mess with the optical setting, expect to do some micro-surgery.
You should be good for a HD up to a capacity of 120GB. The threshold is somewhere around 137GB but you will not find such odd capacity on the market.
I think the rest has been covered.
...Ron

Windows 7 will not recognize the dvd drive in my dv9925nr

Windows will not recognize my dvd drive in Windows 7. It shows up under device manager under cd drives, but will not list in in my computer and will not recognize it as a drive in burning applications.

I haven't installed and started testing the BETA yet, just downloading from MS tonight.I would suspect upper & lower filters,since that is the most common cause of cd/dvd problems from XP-Vista.
http://support.microsoft.com/default.aspx/kb/929461
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

HP dv7 will not recognize second hard drive

My HP dv7 2185dx running Windows 7 will not recognize second hard drive, bios recognizes it, Intel Rapid storage recognizes it.
Primary hard drive is a 1TB, in install a second 500GB hard drive.
This question was solved.
View Solution.

Hi,
Hold down the Windows Key and press R. Into the Run Box type compmgmt.msc and hit enter. Click Disk Management in the left pane and let the drives load up.
Does the 2nd HDD show here?
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

My Laptop Pavilion 9700 will not recognize DVD/CD drive. Does not show up in Device Manager

My laptop Pavilion 9700 will not recognize the DVD/CD drive:
The drive does not show up in the Device Manager’s list: The disk spins and the light is on: Use a
paper clip to open the door; I updated
to Sevice Pak 2 recently, but I am not sure if this has anything to cause this
problem: Please Help, anyone!
Thanks

Hi,
Follow the procedure on the link below to create a bootable Ubuntu CD and follow the steps in Part 3 to 'Try it' to see if this OS will run from the CD without the need to install on your HDD. This will show whether the problem is with Windows or a Hardware problem with the optical drive.
http://www.ubuntu.com/desktop/get-ubuntu/download
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Satellite P505D-S8935 will not recognize DVD/CD Drive

04/04/2011 My Laptop P505d-S8935 will not recognize the DVD/CD Drive. It worked yesterday but not today. I looked under properties and it showed not working properly....could not find driver. Checked driver update....found driver. Still not working. Please advise.

Satellite P505D-S8935
it showed not working properly....could not find driver.
Please quote the message on Properties' General tab under Device status.
-Jerry

Will not recognize internal hard drive

I have a strange problem with a 2009 MacBookPro. It started acting "strange" for the user over the past few months. By "strange" I mean it would freeze, or fail to boot, or sometimes even restart without any reason. Now, it gets even stranger. Tried the standard things, RAM reseat, replace, check for loose connectors etc. It would fail to boot when the hard drive was connected internally. Then it would give a kernal panic and fail to even recognize a hard drive as being installed. Did a PRam reset, SMC reset and even the power off/control key to try to reset the open firmware. No sucess with anything. This is a suystem with an internal battery.
Yet, when using this exact same hard drive on an external USB drive connection, it would boot fine. Next tried it in Terminal mode to boot up another MBP. Failed to boot. When the 2nd MBP was booted from its internal drive and the suspect machine was plugged in as a Firewire (Terminal mode on "strange" computer) an External Firewire Drive appeared on the desktop, then a few seconds later, an identical copy of the first Ext FW drive appeared. This went on with evenbtually six copies of the one single Terminal booted hard drive appearing on the desktop of the second computer. None of the six drives would open or even allow any indiccation of what they contained.
Tried to partition the hard drive when it was put back into the internal slot but it would not unmount and failed to partition. The same thinmg happened when trying to erase it. Connected the hard drive via USB to a Windows 7 machine and used it to erase both the Recovery and Main partitions from the ard drive. Both were erased but the EFI partition could not be erased or cleaned. Put this same hard drive, as an external USB, into a very old XP machine and there the EFI partition was removed when a "Clean" command was sent via command line.
I then took the, now totally erased hard drive, and put it back into the computer as an internal drive and booted the computer from a 10.8 USB stick so I could partition the now empty hard drive. The drive was not even recognized as being present. Did the same thing, but using the USB external connection for that same hard drive. It partitioned and then formatted with 10.8.1 (what was on the USB stick). After the OS was installed, the computer would boot using this newly created OS when connected as an external USB drive. Put the drive back in as the internal drive. Got a Kernal Panic. Forced shutdown and retried. Noi kernal Panic but drive was not even recognized. Pulled the drive from internal and put it back into the external USB and tried booting. System would not recognize the drive as even being present.
I then erased and cleaned the drive in the XP machine again and then, using the USB connection on the second computer reinstalled 10.8 from the USB. When I tried the now newly created software again, the same thing happened as listed above. 2nd machine booted fine on the drive as a USB, "Strange" machine booted fine using the drive as an external USB, Kernal Panicked then would not be recognized in the "Strange" machine.
It appears that when the drive is connected internally. it not only does not have the OS software recognized but will rewrite something in the drive that makes it impossible to be recognized by any Apple. My first thought was that the EFI partition was corrupted somehow so that was why I tried cleaning the EFI partition along with the other two partitions. But even with a new EFI and other partitions, the drive was not useable once it was used to try to boot as an internal drive in the suspect computer.
Now here I am dropping into speculation mode. My guess is that something in the very basic ROM (Pram?) that recognizes a hard drive is in the internal slot and tries to get to the EFI instead fails and in the process it screws up the EFI (or maybe even an address table?) in the hard drive. If it recognizes that there is no internal hard drive, it will happily boot from either a USB stick, a USB connected external hard drive or a Firewire/Terminal mode computer connected to it.
Sounds like a motherboard problem but I am wondering if it is possible to "flash" the very basic ROM that is at the start of the process back to factory default or maybe just replace the chip if it is the same one used as part of the Firmware password protection system.
Anyone have any other ideas or thoughts about possible solutions or at least a way to definitely identify what the problem's cause?

Answer has been found. The internal drive SATA cable was replaced and the system is now working correctly.

My computer will not recognize external firewire drives...very mysterious.

I'm an editor with two 250GB d2 Lacie's and am going crazy over this problem. I've heard plenty about the notorius Lacie issues, mainly involving mounting refusals or even one last week about my friend's bursting into flames. But this one I cannot find the answer to anywhere online and I've been searching all week.
My computer suddenly does not recognize my drives are connected. They are not listed at all in Disk Utility. I tried repairing disk permissions, I tried repairing the volume with Disk Worrier. I tried unplugging everything and resetting and zapping the P-RAM, and every combination of all that. No dice. I tried booting off of CD-ROM. When I plug them in, I hear them power up and run what sounds like smoothly. I tried another friend's Lacie and it acted the same way. I tried both 400 and 800 firewire ports with various cables.
What's going on here? Years worth of editing are on those drives! S.O.S.

it is hard to say what's happening there. have you tried resetting the pmu? http://docs.info.apple.com/article.html?artnum=14449.

My Macbook Pro OS 10.7.5 will not recognize toshiba hard drive. I will register on an iMac running the same OS. Any ideas?

I have a Toshiba external hard drive that i used with MacBook. I now have a MacBook Pro running OS 10.7.5. It does not register that the Toshiba hard drive is plugged in, yet if I plug it into an iMac running the same OS it does work.

I don't know the answer to your problem, but until you resolve it do not upgrade OS X.
I would suggest you try a reinstall:
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Lion, Mountain Lion, or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

MacBook with Lion will not recognize external hard drive (AMP) that was my backup for older IBook, please help

I had a IBook G4 and an external hard drive as its back up.
IBook running something like Snow Lepord, anyway
I have a Intel Macbook now with Lion, Ive been told here there is a possible confliction between the AMP external harddrive and lion.
I will say a few times I have for limited time been able to access the drive on the newer MacBook, but then Lion (I think) drops it.
Any ideas out there?

Disk Utility sees the drive, finder/desktop doesnt.
Click on the Desktop->Finder menu->Preferences->General->Show on Desktop->HDs and ext HDs.
Mac OS Extended (journaled) what's that mean and is the format the issue here?
http://support.apple.com/kb/HT1604 and http://support.apple.com/kb/HT2355
No, that's not the issue.

Classic will not recognize system folder

I have installed Classic from the cd that came with my computer. The system folder for os9 shows up in root next to the osx folder, but there is no 9 on the folder. When I try to run classic in system preferences, it says os9 is not installed. I've seen other postings saying to "bless" it by dragging the finder from the os9 system folder to the desktop then back again, but this does nothing.
Any help would be greatly appreciated!!!

Hello berne04,
Did you try this (from the link that Texas Mac Man posted)? Try it instead of dragging and dropping the Finder.
No "blessed" Mac OS 9 System Folder
If Classic doesn't start, but Mac OS 9 is installed, the System Folder may not be "blessed".
Open System Preferences and choose Classic from the View menu. You may see an alert box with the message:
"No startup volume: There is no volume with a system folder that supports starting Classic. Please install Mac OS 9.1 or later."
It may not be necessary to reinstall Mac OS 9. Try these steps:
1. From the Apple menu, choose System Preferences.
2. From the View menu, choose Startup Disk. The Startup Disk pane appears.
3. Note the current Startup Disk selection, which is a Mac OS X volume.
4. Click the Mac OS 9 System Folder you want to bless.
5. From the View menu, choose Show All.
6. From the View menu, choose Startup Disk.
7. Reselect the volume you noted in Step 3.
8. From the View menu, choose Show All.
9. Quit System Preferences.
Hope This Helps,
Jeff
Mini 1.25, 12 Al PB 1.5, PTP 250, WS PB G3, 3xiMac 400 (OS 9.1) Mac OS X (10.3.9) Wireless KB/Mouse, AEBS, 80 GB OWC FW HD

Windows Vista will not recognize the dvd drive in my Mac Pro

After running windows updates, Windows Vista can no longer find the drivers for the dvd drive. Any suggestions?

Thank goodness for restore points. That was all I needed to do (system repair, do you want to restore to last check point) to be up and running.
I found my problem documented as an issue with Samsung SATA + Windows 7, and my X58. Curious, as moving a working system from one motherboard to another would always end up with Samsung SATA DVD not working, but LG is fine... so looks like time to buy another SATA DVD.
This from /technet.microsoft.com exactly describes the issue:
*CD/DVDRW from TSSTCorp (Samsung) drive, after install W7 without any problem not recognized...* | Modified on 9/9/2009 4:48 PM by lmarcelo
CD/DVD/rw do not respond on the Windows 7 Professional RC 32 bit, I have an Intel G35 desktop board, and 2.3 Ghz. CPU Intel Dual-Core 2, with sata optical drive. (From Samsung) Works fine in the raw clean install, but after the second reboot in the device manager appears with a yellow triangle, so I can't read nor write any CD or DVD.
I did this several times, (Format and install), even with a new CD drive, but it's always the same. Using a 160 Gb. WD hard disk, and alternated with a 400 Gb Samsung Sata HD make no difference at all.
Problem: Can't do anything with CD-DVD drive. (Messagge in the Device System General tab Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)).
By the way, this configuration was working fine in XP Pro. SP3. Any hint? clue? same problem? any one?
http://technet.microsoft.com/en-us/library/dd349347%28WS.10%29.aspx

Old hard drive broke, Macbook will not recognize new hard drive

Hi,
My Macbook wouldn't boot, hard drive was making an odd sound, only would go to the gray/blue screen with the flashing ? folder. I bought a new hard drive and installed it, used Leopard DVD to boot, went to Disk Utility and the only thing that showed up was the DVD. I tried re-seating the drive and still nothing.
Any Suggestions?

Hey hauebj01 and welcome to the forum -
I know it's a hassle but I've heard of some folks having quite a bit of trouble seating replacement drives. You might try that again. Sometimes you have to push harder than you think you should. Make sure that nothing is obstructing the connection.
Also, the drive may be bad. If you have an external enclosure, you can see if you get the same result with it in there.
By the way, which HDD did you purchase?
-GDF

CLASSIC will not recognize my zip drive

Similar Messages

Maybe you are looking for